Home

DVR User Manual - Security Camera Systems

1. Speed 5 Ic gt gt Fig 4 42 track setting f 7 Preview Fig 4 41 cruise set modify cruise line a user can control the dome rotates up up left down right down left left down right and up right and stop rotating adjust the rotate speed and the value of zoom focus and iris of the dome click Start Record button to record the move track of PTZ click this button again can stop record click Start track button to play recorded track click this button again can stop play b click icon to hide the tool bar right key can remerge it click icon to exit the current interface 4 9 Advanced Advanced configuration includes three submenus reset import export and Block Allow list 4 9 1 Reset Reset all settings the device will reboot 4 9 2 Import Export User can export the data files into mobile storage devices as backup function and then import specified data files from mobile storage device to DVH 4 9 3 Block Allow list BLOCK ALLOW LIST O Block List Allow List IP From ro f Default Apply Exit Fig 4 43 Block Allow list Here authorized user can prohibit computer users within a certain IP address segment from accessing to DVR or admit computer users within a certain IP address segment into DVR For example if authorized user don t want computer users within IP address segment from 196 168 000 002 to 196 168 000 004 to access to DVR authorized user can tick off Block list and then input such
2. Esc Fig 2 4 Digital Numbers and Letters Input Window Users can change some value by the wheel such as time Move cursor onto the value and roll the wheel when the value blinks It supports mouse drag l e Set motion detection area click customized hold left button and drag to set motion detection area Set schedule hold left button and drag to set schedule time In playback Click left button to choose the options Click right button to return to live mode In backup Click left button to choose the options Click right button to return to previous picture In PTZ control Click left button to choose the buttons to control the PTZ Click right button to return to live di Notice Mouse is the default tool in all the operation below unless Exceptional indication nd VR User Manual 3 Basic Function Instruction 3 1 Power On Off Before you power on the unit please make sure all the connection is good 3 1 1 Power on Step1 connect with the source power then switch on the power button near the power port on the rear panel Step2 the device will be loaded and the power indicator will display blue Step3 before start a WIZZARD window will be pop up and show some information about time zone time setup network configuration record configuration and disk management User can setup here and refer to the concrete setup steps from the corresponding chapters If users don t want to setup Wizard please click Exit button to e
3. 4 3 6 Snap In this interface user can set up Resolution quality snap interval and snap number 4 4 Schedule configuration Schedule configuration includes three sub menus schedule motion and alarm 4 4 1 Schedule The volume means the seven days of a week from Monday to Sunday the row means 24 hours of a day Click the grid to do relevant setup Blue means checked area and gray means unchecked area Step1 enter into system configuration schedule configuration schedule referring to Fig 4 15 xA SCHEDULE Schedule Motion Sensor Channel sunday Monday Tuesday Wednesday Thursday Friday Saturday Apply Settings lo All Double click and setup schedule Ciefault Fig 4 15 schedule configuration schedule Step2 select channel and double click to pop up a dialog box as Fig 4 16 Now user can edit week schedule SCHEDULE Week Days Sunday ke Apply Settings To Sunday Start Time End Time 00 00 23 59 02 01 23 59 Add Fig 4 16 schedule week schedule D Click add button to add a certain day schedule click delete button to delete the selected schedule Copy user can copy the specify schedule to other dates Click OK button to save the setting click Exit button to exit current interface 2 If user wants to apply the schedule setting of certain channel to other or all channels just only select channel and click Copy button 4 4 2 Motion Step1 enter into
4. Cancel Step 4 Input iTunes Store password and then click OK The software will be installed automatically Note if it was the first time for user to operate please enter user ID if there is no Store account user needs to apply one 2 Install through PC C A Mes IT een EUM M gi Step 2 Connect iPhone and PC Step 1 Install iTunes store in PC and then login nte r Manual E D de Lem dee ded Hm Dr pe ja qm Damme eas ji Se het Ha cm Pardos E La de gn ag DEN mm T Te Tumm 1a krm EN in ve ees Setz pang nba iu J beisa ma man ma as PT D m hara a rar me een rh db i arcam rege pm 7 narratio ua P ary x geg dde as rer x init h um Mind zu bora D mar RR RA p im ds S eise As D rm ee See hides D e be Fue dj de E TEE gel e A 7 bpm rm ER x eg u E TW baaa Ge AA Step 3 Enable search ei function to search Su perCam Step 4 Click free application button e meon E Super Phone FTT Fm ER pes Dew ng bee mg AT a 4 a p ford i m i mh mr a Ten H T Seng n eg Jia Al Aaa j tem al Dyre Appa idn e J Fe F LJ Pr he Iz fe ome SuperCam Pro snes Emm 5 a S feu M Eetecipties Be EI i j Camur am Fr del D WI gr Ee III Cum m lu Alc ed NL pj ox CU TI ur ir Leer dad Tuy Dr SI xj b lt n Lager bs bo ei bo Be il mr Ln Ben Rs i Hai Rond i a B
5. Fig3 25 alarm configuration schedule 4 5 3 Video loss Step 1 enter into system configuration alarm configuration video loss refer to Fig 4 26 Step 2 the setup steps of video loss trigger are familiar with alarm handling user can refer to Chapter 4 5 1 Sensor alarm handling for more details Step 3 user can setup all channels with same parameters i 4 5 4 Other alarm OTHER ALARM X Alarm Type IP Conflict V Disk Full IF Gontlict Disconnect Buzzer Disk Warning To Alarm Out 1 2 i Default Fig4 27 other alarm VIDEO LOSS f Trigger Trigger Trigger i Default Fig 4 26 alarm configuration video loss Step1 enter into system configuration other alarm refer to Fig 4 27 Disk full user can choose the capacity of the disk storage and select the related alarm If the disk is full the system will alarm according to the setup IP conflict if there is an IP address conflict within the same network the device will alarm after user selects buzzer and the channel to alarm out Disconnect if the disconnect happens the device will the device will alarm after the user selects buzzer and the channel to alarm out Disk Warning if the disk reduces the system will send email to the designated mailbox or alarm to notify the reducing information after the user has selected the corresponding function Step 2 select a hard disk in the pull down list box When the disk capacity is lower than that value ther
6. The application was successfully installed ok Run Note If the software fails to download please check in accordance with the following steps Check whether the network of mobile phone is normal or not 1 2 Check whether DVR server connect network normally or not 3 Modify the option of Browser Configuration 1 Enter into Menu gt Option gt Browser Configuration referring to the following figure in the left 2 Enter into Menu gt Option gt Cache Operations to clear up browser cache Please refer to below picture in the right Browser Configuration Cache Operations Browser Clear History PA Support JavaScript e EX Allow JavaScript popups Ma Terminate slow running scripts size 2 7K ZJ Use Background Images Content Cache EA Support Embedded Media Pushed Content Show Images On WML amp HTML Page Size 0 0K Browser Identification BlackBerry Cookie Cache Start Page Start Page Size 0 cookies Home Page Address about start Note When user uses the SuperCam software in mobile phone with touch screen there will be compatible problem Solution Enter into Options Menu gt Advance options gt Applications gt SuperCam and click Disable Compatibility button This problem will be solved VR User Ma D rati t for BI rry mobile phone client D 1 Login Address K Tia d min Password Remember server Login Exit Enter server s IP address or domain name user s ID and pass
7. t Note If you cannot download and install ActiveX please refer to Appendix A FAQ Q8 2 Connect the DVR to internet directly Step 1 Enter into the DVR s Main Menu Setup Network interface to enable PPPoE and then input user name and password received from your ISP Next click Apply The DVR will connect to the server and would give a confirmation message Step 2 When accessing the remote interface of DVR user can input WAN IP to access directly user can enter into Main menu Information Network interface to check IP address The browser will download Active X control Step 3 The following setting Sa are as the same as SEDE E 9 and Step 6 in Point 1 l 2011 04 28 10 35 06 2 Zen y ga Les Sub stream 14 15 16 1 18 19 20 21 22 22 24 7262 285292031 H Local Recording Status 2343 678 9 19 11 12 13 14 15 16 17 18 19 20 22 22 233 4 35 26 27 206 29 200 31 2 L255 DUR EA 4 m EN gt dE w m re 7 1 View with IE browser EZ 7 2 Remote Surveillance through Apple PC Note Because the current plug in version of client end just only supports 32 bit mode so the safari browser shall start 32 bit mode If the browser is the earlier MACOS version the default setting is 32 bit mode and the setting can be skipped The Setting steps are as follows First Right click safari icon ee and select Show in Finder Second Select Applications Right click Safari App gt Select Get Inf
8. Buttons definition Ameans the dome rotate up means the dome rotate up left means the dome rotate up right Wmeans the dome rotate down amp means the dome rotate left down 4 means the dome rotate right down means the dome rotate left Bemeans the dome rotate right Blmeans the dome stop rotating DVR User Mt Zoom button Click Button near Zoom button to zoom in the locale picture of this camera Click button near Zoom button to zoom out the locale picture of this camera ix GL button Click button near Focus button to have long focus Click button near Focus button to have short focus Go to the Preset r1 Select and do auto cruise Track Auto scan Wiper button Light button When clicking the right mouse on the live interface a pull down menu will appear as below Stream this DVR supports master stream and sub stream Master Stream Master stream has higher frame rate max 25FPS PAL 30 Sub stream All to Master Stream FP NTSC for every channel but it needs higher network bandwidth simultaneously second stream has low frame rate max 6FPS PAL 7FPS NTSC for every channel it requires low network bandwidth Therefore users can select the stream according to their bandwidth zoom in All to master sub stream set all channel to master stream Fig 7 3 right key sub menu or sub stream All to Sub stream Enable Audio Full Screen Enable audio enable or dis
9. sow LEE T fata A T3 O Ci I rrr x E 21r LI Le 1 F 2 D 3 SE E B a7 B8 el u VI O G Ka e a Wei Current viewing channel Wen Channel status Bl 5c D PTZ click to switch to Fig 2 interface e d e B Close the video of the current channel 4 Live audio Eee B M em 0 IES B Leftward rotates the PTZ un Rightward rotates the PTZ EOM Stop rotating the PTZ CG O Zoom In Focus In lris Add Zoom Out Focus Out lris Sub elect the preset point D Set the cruise line Rotate speed of the PTZ H Reverse Horizontal Reverse V Reverse Vertical Reverse alg 4 Image view interface refer below picture in the left 5 Record Playback interface refer below picture in the right Return Picture E The first picture E Previous Next CX The last picture CO icture to album 07 23 2010 07 42 25 Py P ape es g Delete picture n 4d Click the record file to playback 6 Server list Interface refer to below picture in the left 7 Config interface refer to below picture in the right Return Favorites Server20100407092804 Server20100407155052 Add a server list Modify a server list Ed Delete a server list s6 Main parameters for mobile phone video config Reum 2010 7 23 16 11 12 mp4 CAML a 77107 m Play pause O stop Rewind Fast forward 07 23 2010 08 10 19 Playing Return Settings Storage Record file clip size Reservered disk space W MB
10. Step8 Input the server s address ID and password respectively Then save ty Notice About Access point there may be different access points in different countries or from service providers Step9 Enter Live View it will connect the server and display pictures Refer picture in the left d i Notice User name and password here are the same with that used on the DVH The default is admin and 123456 Step10 In Live View users can do snapshot change channels and control PTZ Refer picture in the right Live View 13 i Live View SnapShot FullScreen Direction Camera Focus Zoom 1 H Hide Iris Options Back select Cancel 8 3 The Software installation for iPhone mobile clients 1 Install through iphone Step 1 Open App Store function of iphone Step 2 Enable search mal function to search SuperCam ii China Unicorn gt 10 32 am t Step 3 Click SuperCam enter into introduce Fiene and then click FREE It will change into INSTALL China Unicom gt 11 01 am s x kel zt Ctuna Urecom gt 11 01 em 3 Support channel video capture record and record playback 4 Support channel audio 5 Support server ist No fmit on the number of 8 Support electronic fullscreen mode 9 Support backup record fles lo Ablum on iPhone then you can transport these files to PC Phone then you can transport these files to PC by Tunes by ITunes iTunes Password supercamzaD S omal eom
11. VIDO DSCP VISCA SAMSUNG RM110 HY N control 3 Advance Step 1 enter into system configuration P T Z configuration advance refer to Fig 4 37 Step 2 in the Advance interface click preset Setting button to see a dialog box as Fig 4 38 Serial Port Advanced PRESET Channel 1 CH Preset Cruise Track No Enable Name Preset f Setting Setting Setting Y preset001 Setting preset002 Setting Setting Setting Setting Y f Setting f Setting f Setting Y preset003 Setting Y f Setting Setting i Setting preset004 Setting r T f Default l f OK Fig 4 37 P T Z configuration advance Fig 4 38 advance preset setting a in the preset set interface while clicking Setting button a dialog will pop up as Fig 3 39 A y lt Zoom 4 CN Focus KA CA Iris Speed gt Fig 4 39 preset set setting b user can control the dome rotates up up left down right down left left down right and up right and stop rotating adjust the rotate speed and the value of zoom focus and iris of the dome c select the serial number of the preset point Click button to enable the PTZ wiper and click L button to enable the PTZ light Note PTZ must support wiper and light these two functional buttons can take effect At the same time these two buttons are just available when selecting PELCOP or PELCOD Click Save button to save the settings click icon to hide the tool bar right key can remerge it click
12. id pd E guns qui Mk mt dil dum ali pias ACA deier erter mes TOL beem frees en y TI ma AET ima Era H ru dear Bn rm E o mem 1 1 Tr Tam pisar Sat ramo A aren 114 r ol o pr ra waar m ioak T Srs pemeri ae omy Sarg pg Dap mamni Tin It In TETI LIA d H iy CH z um rn ar BE ITE d sept x oc DN Step 5 Input apple ID and password then click acquire Step 6 Tick off synchronously apply program and SuperCam and then click apply button Operation Instruction for SuperCam iphone 1 Login interface VL O Server user meibu com 5008 SIT iia d min Password v Remember server Log in Cancel Enter server s IP address or domain name user name and password Click Remember server to save the setting click button can quick input saved server address user name and password 2 Main Interface Log B Playback eT e ap vest image ran i Log Server List Live vevew Settings software setting E e Information device information view Hep software help center Information Lag Off Logoff logoff and return to login interface 3 Live View Interface User Manual LiveView Ptz Control F eturn Ptz Control mum Channel Configure bi Bika y TTT STS HE one Le 3 A TT ERE T Im y ene AAA TA MATE 5 E e LI Fables ME CI MAE ERU Cond 1 BB Groug A Proge ID ol 1 1 1 1 11011
13. Display Display mode Remember display order Alarm Audio alarm Shake alarm BS pve User Manual Record file clip size Single video size When the video size is greater than setup value change another video files Reserved disk space Reserved SD Card disk space when the disk space is less than setup value the video will be stopped Display config Display mode User can select one live picture display or four live picture displays Remember display order User can choose whether to remember display order or not Alarm config Select Audio Alarm When Video Loss Sensor Motion happens trigger sound alarm Select shake Alarm When Video Loss Sensor Motion happens trigger vibrate alarm 8 Information View Interface uperCam DAA IN AN E ARA Device name the current device name Device Device ID the current connection device ID Device Name DVS Software version the current connection device Device ID 0 software version Software version 2070100 Build date the current connection device build date Build date 20100401 software version the software version of mobile Phone phone in use Software version F Software build date the software build date of mobile phone in use 8 4 The installation amp operation methods for Android mobile clients Software Installation E3Q E aM CH 4 48 PM supercam H C cm uperCam Step 1 run Google Market program Step 2 search SuperCam gor a T O 4 48 PM ae C
14. Enter the username and password in the subsequent window d Notice If HTTP port is not 80 other number instead need add the port number after IP address For example set HTTP port as 82 need input IP address like 192 168 0 25 82 User name and password here are the same with that used on the DVH The default is admin and 123456 7 1 2 On WAN There are two ways for the DVR to connect to internet 1 Connect the DVR to internet through router or virtual server Step 1 Enter into the DVR s Main Menu Setup Network interface to input IP address Subnet Mask etc If using DHCP please enable DHCP in both the DVR and router Step 2 Forward IP address and port number in Virtual Server setup of the router or virtual server Configure the firewall to allow accessing the DVR If the user has enabled the UPnP function in both the DVR and router he can skip this step Step 4 If users want to utilize dynamic domain name please apply for a domain name in a DNS server supported by the DVR or router Then add to the DVR or router LUI llis User Manual This unit supports www dns2p com www meibu com www dyndns com and www no ip com Step 5 Open IE browser input IP address or dynamic domain name and enter If HTTP port is not 80 add the port number after IP address or domain name Step 6 IE will download ActiveX automatically Then a window pops up and asks for user name and password Input name and password correctly and enter to view
15. IP address segment After that click Apply to save settings If authorized users allow computer users within a certain IP address segment to access DVR they can tick off Allow list and then operate in the same way n 5 Record search amp playback and backup Search configuration includes four submenus time search event search file management and image 5 1 Time search Step1 enter into Search configuration gt time search refer to Fig 5 1 SEARCH hme Starch Event Search File Management Image Fe Start Time 2011 WD WS e os P04 s 2011 EH 09 02 Su Me Tu We Th Er Sa DO H A 04 H A 08 00 12 00 i o 1 1 ler S opTop rb prz FB PS 2 Fig 5 1 Search configuration time search Step2 To search a record select date and channels on the right hand side and press the Search button A date with highlighted borderline indicates presence of data Step 3 Use the grid on the left hand side to identify the presence of data as per the required time Blue patches indicate presence of data This can be selected by clicking a particular grid or by entering the specific value in the time field ER Note the vertical column means hours horizontal column means channels Step4 click Play a button to playback record click the relevant buttons on the screen to do operation play pause i screen mode stop pre move tool E zoom volume exit Al o 2 PETT mmm IN lt A HN me Imo Camera Name K VALS
16. OU DEE 27 E A A TER NRI E ER PE INO A A TORNO A A 28 AP A rSSEDM T PS UDIN aM senate uf 28 2 9 A etd aS t MD Edd M n E muc 29 4 522 NIOHOD EE 30 A NN o E 32 4 52 ONE alarum s e ds EA 33 29 9 2 Fe a E 34 AG INGIW ONGC OMMO MAO Mass E T UU ES 34 4 5 et PA Lm ee sce ML Ata E ELA 34 RE DEE 35 A eMe cT QN nesstcae 36 DVR User M A EE 37 4 7 User management configurato aii m 40 ci Nc CE 42 qi aval eoa eue Po A MI IA M ELEME II 45 fF OT FRE A UT TT UIN 45 CET Ian Seide PP crm 45 49S BOCK We EE 45 5 Record search amp playback and backup da 46 S MMS SCA CN A A A a 46 E e EE 47 Oo e El lt 48 SR girato tcr Dt ppc E 49 A O HT 49 OR Manage DVR m e 51 RO eo co AAA ee 51 ARNES A geal A 51 o T e Event et ea ODDS oso A EE etes eive eee be EP resta A eo 51 EIERE e Eege e dE 51 ey rM ele Oa E OTT UTE TU T UE M 51 51 5 OnlinedgnrormialiOD aii eu ed aser ed Ev toc Ede ELO cas tate too be ah eee A id 51 MIS EIS IRIURE METTE TROU 51 e DISK Management tia 52 A e HR 52 A A H MG 52 7 Reutte zess 53 TAME Remote SUNY CHANG RETE dat 53 User Manual 7 1 1 On LAN E 53 A AN 53 7 2 Remote Surveillance through Apple PC 55 oes A T 56 TEAD AL i gta
17. Properties DVR User Mani Appendix B Calculate Recording Capacity Users can calculate the size of hard disk according to the saving time and DVR recording settings The DVR uses fixed video bit rate The below are the details at different settings Video Quality Bit Rate kbps Used Space MB h highest 2048 30 NTSC 1536 1024 EPOR Lower 512 241 Highest 1024 Higher 768 337 5 or 30 NTSC 25 PAL Lower 384 168 75 Lowest 256 112 5 The calculation format is Total Recording capacity Used space per hour MB h coverage rate of hard disk x recording time hour xchannel numbers For instance one customer uses PAL cameras set resolution to CIF video quality to Lowest frame rate to 25 fps for enabling total 16 channels He wants the unit to record continuously in a month Below is the calculation Total Recoding capacity 2112 5 mb h X 24 hours day X30 days X16 channels 1296000 MB 1296 GB Therefore customers just install one SATA HDD with 1000GB plus one SATA HDD with 320GB it can almost record for one month n VR User Manual Appendix C Compatible Devices 1 Compatible USB drive after test 512MB 1G 2GB SanDisk 4GB Tab C 1 Compatible USB drive 2 Compatible SATA CD DVD writers after test Brand Mode TECLAST GH22NP20 TL 22XD BENQ DW220S 0K4 LITEON DH 20A6S01C LITEON DH 20A4P02C SAMSUNG TS H653B Tab C 1 Compatible CD DVD writers DVR User Mai
18. button Download the 949 KB File PCam PPC2003 ARM CAB to the My Documents Folder in Main Memory Open file after download Downoad PCam PPC2003 ARM CAB to the My Document folder in Main Memory 7 open file after download View Tools C3 sv View Tools eQdq Download PCam PPC2003 ARM CAB to the My Document folder in Main Memory 7 open file after download Step5 Input the server s address ID and password respectively in the columns of Server User and Password and click Go to log on the server It will show the picture if access successfully Refer below picture in the left Step6 Camera 1 is the default channel after login Change the channel in rolling down menu of Channel please refer to below picture in the right Pocket Camera gt Y d 10 44 CH Server 192 168 3 35 STOP Channel x M 1CHs User Pocket Camera T 2 Y d 10 44 DC Server 192 168 3 35 y STOP Notice User name and password here are the same with that used on the DVH The default is admin and 123456 0000 00009 8 2 By Phones with Symbian Please use the smart phones with symbian version supported by this unit The detail information is as follows Symbian UIQ Symbian S80 support support Symbian S60 3 Edition Symbian OS v9 1 Symbian S60 3 Edition with FP 1 Symbian OS v9 2 Symbian S60 3 Edition with FP2 Symbian OS v9 3 R User Manual Symbian S60 5 Edit
19. cee 58 7 3 The remote live preview interface cccccseccccsseccceeseecceusceceeaueeeceaueeeseuseeesegeeecsaseesseuseessageeeseseesseueeesseeeessaeeessageeessuseeesaeeeess 59 7 4 Remote playback 8 b ackunp EEEren nn EEn ennnen 62 rgo Pe ONS le Tel 62 AE HEMOS Daiana nado 67 7 5 Remote System e ul te Te E 68 A d EE 69 Remote Iniormation Search asiatica ilicitud 69 5 Mobile Surveillance nai 70 8 1 By Phones with Windows mole nren enneren 70 8 2 BY Phones EE due EE 71 8 3 The Software installation for iPhone mobile dente 74 8 4 The installation amp operation methods for Android mobile chente 80 8 5 Installation and operation Methods for BlackBerry Mobile phone Cent 87 8 5 1 Installation instruction for BlackBerry Mobile phone Cent 87 8 5 2 Operation method for Blackberry mobile phone client AA 89 a A A o A 92 Appendix B Calculate Reenert steiere aii 99 Appendix C Compatible Bra ey t 100 Appendix D 24 CH DVR SPeCHICALION Scania 101 Le D e DVR cS CUT UNO mr 102 DVR User Man 1 Introduction 1 1 DVR Introduction This model of DVR Digital Video Recorder is designed for high performance CCTV solutions It adopts state of the art video processing chips and embedded Linux system Meanwhile it utilizes most advanced technologies such as standard H 264 with low bit rate Dual stream SATA interface VGA output mouse
20. changes m Introduction w lestination Sele You will be guided through the steps necessary to install this software tallatioi ype Name coodoo y Details Continue 0 Cancel Cok Input the name and password of Apple PC and then click OK to install this Active X control Step 6 After finishing installing the Active X control please quit from the Safari browser Right click Z icon on the desktop and then select Quit button to quit the browser Then restart Safari browser Input the IP address and http port to enter into the login interface of DVR 7 2 2 On WAN There are also two ways for DVR to connect to Internet 1 Connect the DVR to internet through router or virtual server Step 1 The network setups are the same as step one to step four of point 1 on WAN of IE remote surveillance Step 2 Enter WAN IP and http port in the Safari browser to install the Active control The concrete steps are the same as step 5 and 6 of Chapter 7 2 1 2 Connect the DVR to internet directly Step 1 The network setups are the same as step one of point 2 on WAN of IE remote surveillance Step 2 Enter WAN IP and http port in the Safari browser to install the Active control The concrete steps are the same as step 5 and 6 of Chapter 7 2 1 55 lt 7 3 The remote live preview interface 2011 04 28 09 55 58 Status epum mre indicator mode em mm picture Oil il record talk Master sub stream statu
21. for example o Network 3 Online Users Type User Name Time IP Address Event Search admin 2011 04 28 10 39 20 192 168 2 67 Time Search admin i 2011 04 28 10 38 33 192 168 2 67 Time Search admin 2011 04 28 10 37 05 192 168 267 Logoff admin 2011 04 28 10 34 15 192 168 3 222 Logoff admin 2011 04 28 10 34 08 192 168 3 222 Logon admin 2011 04 28 10 31 55 192 168 2 67 Logoff admin 2011 04 28 10 31 44 192 168 2 67 Stop P T Z Operation admin 2011 04 28 10 31 32 192 168 2 67 Start P T Z Operation admin 2011 04 28 10 31 27 192 168 2 67 Check Log admin 2011 04 28 10 30 13 192 168 2 67 Time Search admin 2011 04 28 10 27 48 192 168 2 67 Time Search admin 2011 04 28 10 23 48 192 168 2 67 Logon admin 2011 04 28 09 54 54 192 168 2 67 Logon admin 2011 04 28 09 54 39 192 168 3 222 Logon admin 2011 04 28 09 54 08 192 168 3 222 Stop P T Z Operation admin 2011 04 28 09 33 32 127 0 0 1 1 1 Export Path Ltd JL JLo JEn eee Sen Fig 7 11 Remote information search Note There may be subtle differences with respect to functions of remote surveillance between through IE and through n Start Time 2011 04 28 l 00 00 00 End Time 2011 04 28 el 23 59 59 System Control Con
22. icon to exit the current interface d in the preset interface click OK button to save the setting click Exit button to exit current interface Step 3 in the Advance interface while clicking cruise Setting button a dialog box will pop up as Fig 4 40 n R User Manual CRUISE Channel 1 Name Cruise Cruise Cruise Setup Delete Clear All Fig 4 40 cruise set a click Add button to add cruise line in the list box max 8 cruise line can be added select a cruise line and click Setup button to see a dialog box as Fig 4 41 b click Add icon to set the speed and time of preset point select a preset point and then click Delete icon E to delete that preset point click Modify icon to modify the setting of a preset point User can clic RR Et those icons to adjust the position of preset point Click Preview button to preview the cruise line click OK button to save the setting click Exit button to exit current interface C select a preset point in the cruise line list box Click Delete button to delete that cruise line click Clear all button to clear all cruise line from the list box click OK button to save the setting click Exit button to exit current interface CRUISE PRESET x Step4 in the Advance interface while clicking No Name track Setting button a dialog box will pop up as Mime a Fig 4 42 Preset Speed Time 1 5 Track A Y fr Start Record Deag e 8 2 3 A e Start Track O
23. is 0 After that press ENTER button to confirm Step2 User can check the device ID by enter into System configuration Basic configuration device ID User also can set other DVR with the same device ID For more convenient to operate we don t recommend user to set the device ID too long Step3 Cancel controller to control DVR turn the IR sensor of the remote controller to the IR receiver that on the front panel press the number key 8 twice then input the device ID that needs to be cancelled from controlling press ENTER button to confirm After that the DVR will not be controlled by remote controller 2 5 Control with Mouse 2 5 1 Connect Mouse It supports USB mouse through the ports on the rear panel Notice If mouse is not detected or doesn t work check below steps 1 Make sure the mouse plugs in the USB mouse port not the USB port nir 2 Change a mouse to try 2 5 2 Use Mouse In live Double click left button on one camera to be full screen display Double click again to return to the previous screen display Click right button to show the control bar at the bottom of the screen Here are all control and setup Click right mouse again to hide the control bar In setup Click left button to enter Click right button to cancel setup or return to the previous If you want to input the value please move cursor to the blank and click An input window will appear as Fig2 4 It supports digitals letters and symbols input
24. ssp Fm Supercam ML Jc V Tonychen Metwork communication AA System tools di Hardware SuperCam is a professional mobile phone client software for rs and IP show all V supdeillance dels onl for professional Cancel Step 3 press Install button Step 4 click OK button nd pecemnperad4 Zu mj ues CO 4 31 PM Sam 16 58 Gear notifications Cem d e APN Email E superCam Lt g stall Zi Finish istal 4 51 PM oogle Maps Google Talk Cakulator um Add E mail 4 00 PM n Lei CU contacts jrowser Marke Gallen E 10655111 Brow arket Gallery 5 unreal messages 2005 12 14 A eg Ww SIM Step 5 user can view the download and install process in notifications Finished downloading the software will install automatically Login Cancel Enter into server s IP address or domain name user s ID and password Click Remember server to save the setting click Y button can quick input saved server address user name and password Main menu Playback f Server List Information Live view x Playback playback record file Image imageview Log Log Server List A Live live view software setting A information device information view Help software help center pin Logoft logoff and return to login interface NIU 13 91 12 VR User Manual Mari Current viewing channel Mark2 Channel status mE na Switch channels E d PTZ click to swi
25. supported IE browser supported with full remote control mobile view by phones etc ensuring powerful functions and high stability Due to these distinctive characteristics it is widely used in banks telecommunication transportation factories warehouse and other related applications 1 2 Main Features COMPRESSION FORMAT e Standard H 264 compression with low bit rate and better image quality LIVE SURVEILLANCE e Support HD VGA output e Support channel security by hiding live display o Display the local record state and basic information e Support USB to make full control RECORD MEDIA e Support eight optional or four SATA HDDs to record for a longer time without any limitation e Support saving recorded files with AVI standard format to a remote computer through internet BACKUP e Support USB 2 0 devices to backup ZK BS pve User Manual e Support built in SATA DVD writer to backup e Support saving recorded files with AVI standard format to a remote computer through internet RECORD amp PLAYBACK Record modes Manual Schedule Motion detection and Sensor alarm recording Support recycle after HDD full Resolution frame rate and picture quality are adjustable 128MB for every video file packaging Three record search mode time search event search and image search Support 1 4 6 9 16 screen playback simultaneously Support deleting and locking the recorded files one by one Support remote playback in Network Client th
26. with NTP server to refresh NTP server date user also can adjust system date manually eer Manual 4 1 3 DST BASIC x Step1 enter into system configuration basic System Dale amp Time DEI configuration DST refer to Fig 4 5 Daylight Saving Time Step2 in this interface enable daylight saving time time Time Ciiset I1 vae as Wer offset mode start amp end month week date etc From January The Ist Week ura Foo mm ml Lintil Janu ary The Ist Wierk Sunday nn on mm Default Fig 4 5 basic configuration DST 4 2 Live configuration Live configuration includes four submenus live main monitor Spot and mask 4 2 1 Live In this interface user can setup camera name adjust colors brightness hue saturation and contrast ETT E Step1 enter into system configuration live configuration live refer to Fig 4 6 EE Note Click Camera Name a soft keyboard will pop MERA S SC up User can self define the camera name Click Shift 2 CAMERAUZ E Setting button user can input Capital letters click Shift CAMERADS IS Setting button again user can input Chinese characters CAMERADT JE Setting Step2 tick off camera name click setting button a window will pop up as Fig 4 7 five Main Monitor Spot Mask Setting Default Fig 4 6 live configuration live Channel T 7 Step3 in this interface user can adjust brightness hue TE T saturation and contrast in live click
27. 04 16 35 2011 04 28 04 16 35 2011 04 28 04 38 44 2011 04 28 04 38 44 2011 04 28 05 00 53 2011 04 28 05 00 53 2011 04 28 05 23 03 2011 04 28 05 23 03 2011 04 28 05 45 12 2011 04 28 05 45 12 2011 04 28 06 07 37 2011 04 28 06 07 37 2011 04 28 06 29 19 2011 04 28 06 29 19 2011 04 28 06 53 52 OVO EYIQ OOO ETE EDT ET ET D ET ET ET IST EST ST bech p p p pro be pr be 1 pt lps ke 2011 04 28 06 53 52 2011 04 28 07 18 22 File Path box 1 16 Browse Fig 7 9 remote backup interface Step1 select channels set the start and end time and then click search button The file information will be displayed in the file list Start Time 2011 04 28 75 00 00 00 End Time 2011 04 28 l 23 59 59 Channel NEP M2 Ka Ka lei Me M7 Ee Ma gz m23 ga alas Eus Ez Es Step2 select backup files click browse button to set the save path and then click backup button to start backup The backup files will be saved on user s PC ndr 7 5 Remote System configuration User can remote setup the parameters of the device Functions of remote configurations include basic configuration live configuration record configuration schedule configuration alarm configuration network configuration PTZ configuration and user configuration User should firstly select an item in the menu list on the le
28. 2 IP Address XXX XXX XXX XXX gm gt Subnet Mask XXX XXX XXX XXX Router XXX XXX XXX XXX DNS Server XXX XXX XXX XXX Search Domains ae LT d uf Click the lock to prevent further changes Assist me Step 3 After acquiring the IP address Subnet Mask and so on please enter into the DVR s Main videmus emt interface to manually input IP address Subnet Mask and Gateway according to the configuration of PC The network segment should be the same as the PC If using DHCP please enable DHCP in the DVR and router Step 4 After finishing the above information users can enter LAN IP and http port in the Safari browser For example input http 192 168 1 100 81 here 192 168 1 100 is LAN IP of DVR 81 is the http port of DVR Click E button the browser will download Active X control as shown below ane Web Client 7 Lal EO if i netp 192 168 1 100 81 Ihello CO HB Apple untitled folder v please click icon to load and install WebkitPlugin please restart browser to ensure WebkitPlugin can take effect after install nr YVR User Manual Step 5 Click icon and then select the Active X control the welcome interface will be shown Click Continue Install button the following window will pop up Downloads ene v Install WebClientPlugin 64 n 64 pkg Welcome to the WebClientPlugin 64 Installer E Type your password to allow Installer to make 8 Downloads A h
29. 3 Compatible HDD list Maxtor Diamondmax 21 STM3160215AS 160G ES pve User Manual Appendix D 24 CH Specifications Video output Composite 1 0V p p 750 BNCx2 VGAX1 Video Input Composite 1 0V p p 750 BNCx24 VGA Resolution 1280 1024 1024 768 800 600 352 288 704 576 PAL 352 240 704 480 NTSC 600FPS PAL 720FPS NTSC 600 PAL 720 NTSC Audio Input RCA X16 Alarm output RS485 x 2 USB2 0 x 2 one for backup another for USB mouse SATA x 3 DVD RW x 1 or SATA x 4 SATA x8 optional Remote controller 10 90 Average Operating Power Excluding HDD DVR User Mani Appendix E 32 CH Specifications Video output Composite 1 0V p p 750 BNCx2 VGAX1 Video Input Composite 1 0V p p 750 BNCx32 VGA Resolution 1280 1024 1024 768 800 600 352 288 704 576 PAL 352 240 704 480 NTSC 800FPS PAL 960FPS NTSC 800 PAL 960 NTSC Audio Input RCA X16 Alarm output RS485 x 2 USB2 0 x 2 one for backup another for USB mouse SATA x 3 DVD RW x 1 or SATA x 4 SATA x8 optional 450011220001 AO
30. 43 46 Writing 2011 04 28 10 02 11 2011 04 28 10 25 01 Sun Mon Tue Wed Thu Fri Sat c 3 a 5 5 y H 9 1D 14 12 13 19 15 15 17 18 19 20 21 22 23 2011 04 28 07 42 11 2011 04 28 08 05 36 24 25 26 27 BB 29 30 2011 04 28 07 19 22 2011 04 28 07 42 11 2011 04 28 06 53 52 2011 04 28 07 18 22 Channel EP M2 biz v 4 e ies Me M7 Ms EJE kel 10 bel v i2 EIER Mia Mis v i6 EE wlis bel o v 20 E Ma Maz Maz v 24 H amas l26 v 27 v 28 Unlock Delete M29 M30 M31 ka Fig 7 8 file management interface Lock select certain file item in the file list box and click Lock button to lock this file that ca not be deleted or overlaid Unlock select a locked file and click unlock button to unlock this file Delete select an unlock file and click delete button to delete this file from file list EZ 7 4 2 Remote backup Click Backup button to enter into backup interface refers to Fig 7 9 Data List pa a 2011 04 27 23 50 35 2011 04 28 00 12 48 2011 04 28 00 57 07 2011 04 28 01 19 16 2011 04 28 01 41 34 2011 04 28 02 03 47 2011 04 28 02 25 52 2011 04 28 02 48 02 2011 04 28 03 10 11 2011 04 28 03 32 20 2011 04 28 03 54 25 2011 04 28 00 12 48 2011 04 28 00 34 58 E 2011 04 28 00 34 58 2011 04 28 00 57 07 2011 04 28 01 19 16 2011 04 28 01 41 34 2011 04 28 02 03 47 2011 04 28 02 25 52 2011 04 28 02 48 02 2011 04 28 03 10 11 2011 04 28 03 32 20 Check Start Tire 2011 04 28 03 54 25 2011 04 28
31. 6 1 4 Network information In this interface user can check relevant parameters of network 6 1 5 Online information In this interface user can check the details of the current connection of online users Refresh refresh the current interface Disconnect the administrator authorized to disconnect the client terminal When disconnected that PC will not be able to access the device within five minutes 6 2 Manual alarm In this interface user can check the relevant parameters of manual alarm EE VR User Manual 6 3 Disk management 1 Format the disk Step1 enter into disk management interface Note please format the hard disk before record If not being formatted it will show the status of the disk free space and total space show OM at the bottom of screen Step2 click Refresh button to refresh the disk information of the list box set the property of the disk then click Apply button to save the setting Step3 select a hard disk and click Format button to star format Note all recorded files in the hard disk will be lost after formatted 2 Advanced User may check model S N firmware health status of the disk in this interface User also can monitor the temperature internal circuit dielectric material of the disk analysis the potential problems of the disk and warn so as to protect its data 6 4 Upgrade At present it only supports USB update Get the software from your vendor when there is a new software versio
32. 92 168 0 25 82 into IE browser Definitions and descriptions of network configuration DDNS server DDNS server Website provided by dynamic domain name supplier The optional www dns2p net www meibu com www dyndns comandwww no ip com The domain name user registered at the supplier s website Update interval The interval time of upgrading DVR IP address 4 7 User management configuration Step 1 enter into system configuration user management configuration refer to Fig 4 33 Step 2 click Add button to display a dialog box as Fig 4 34 geir T ADD USER General Authority User Name Password USER MANAGER Confirm Password User Name User Type PC MAC Address User Type 00 00 00 00 00 00 Binding PC MAC Address PC MAC Address 00 00 00 00 00 00 f Setup f Delete Change Password Fig 4 33 user management configuration Fig 4 34 add general O General Input user name password select user type normal and advance input the MAC address of the PC click OK button Then this user will be added into the user list box click Exit button to exit the current interface Note when the default value of binding PC MAC address is 0 the user is not bind with the specify computer the the user can log in DVR on the binding computer after set the specific binding MAC address 2 Authority Step 1 enter into Add user gt authority refer to Fig 4 35 Step 2 In the authority interface assign the definite RB ii com A e ope
33. DVR User Manual For H 264 24 32 channel digital video recorder All rights reserved CAUTION e Please read this user manual carefully to ensure that you can use the device correctly and safely e The contents of this manual are subject to change without notice e This device should be operated only from the type of power source indicated on the marking label The voltage of the power must be verified before using Kindly remove the cables from the power source if the device is not to be used for a long period of time e Do not install this device near any heat sources such as radiators heat registers stoves or other device that produce heat e Do not install this device near water Clean only with a dry cloth e Do not block any ventilation openings and ensure well ventilation around the machine e Do not power off the DVR when the device is function The correct procedure to shut down DVR is to stop recording firstly and then use shut down button from the menu and finally switching off the main power e This equipment is for indoor use only Do not expose the machine in rain or moist environment In case any solid or liquid get inside the machine s case please cut off the power supply immediately and get it checked by a qualified technician e Refer all servicing to qualified service personnel No any parts repaired by yourself without technical aid or approval e This manual is suitable for 24 32 channel digital video recorders All ex
34. EF rewind gt gt 1X hide toolbar AER last segment of record play process next segment record Playback buttons Note when the monitor resolution is VGA800 600 the time search interface will appear a hide button click this button the whole interface can be expanded 5 2 Event search Step 1 enter into Search configuration 2 event search refer to Fig 5 2 SEARCH lime Search File Management Image Toy pre Start Dire Erd Firme i Motion D amp 56f04 f 2011 17 00 06 osiodi20711 17 00 06 A 5 Tu We Th Fr Motion 151042011 17 00 06 SJDA2011 10 7 00 06 z q al 5 Motion 05 042011 17 00 06 ETE T DTT 17 00 06 3 10 11 Maotlon AE 2014 17 00 06 OS FO E 2 BI 5 Sensor Sensor 05 04 2011 17 00 06 05 04 2011 17 00 06 Metten 051042077 1 00 06 OSA 2011 1 7 00 0E Sensor 050412011 17 00 06 SOO 17 00 06 Sensor TE 2011 1 00 06 IA A Motion AEST TTE Nr UTR TE OS 0472011 17 00 06 Motion 05 042011 1 00 06 AA T 7 00 06 v Molior Sensor Fig 5 2 Search configuration event search ye User Manual Step 2 while clicking Search button the searched event information will displayed in the event list box User can select date channel and tick off Motion Sensor or All accordingly Step 3 double check a certain record file to playback Note when the monitor resolution is VGA800 600 the event search interface will appear a hide button click this button the whole interface can be expanded 5 3 File manage
35. amples and pictures used in the manual are from 32 channel DVR Table of Contents ic A MENU NEIN aa atm re tse cdo EEUU EN ECC EE E M NR HU ema eerste C URN E 1 AA A 1 SS AA AP E ee ee ee eee 1 2 Hardware Installati0D coocococncnncnonncnnnnnacancncnnnnrnnnn ran nana nanrnnnnnnrananennaas 4 2 1 Install Hard Drive amp DVD Werter 4 2 Ela GU Ee 4 2 1 2 Install DVD 6 2 2 Front E ANC NB ESCUPIONS EE 7 2 5 Rear Panel MSIF CONS sra anda D GR rara iced dard agre RA aa D A a bn E ME a an 8 A MIO m OA OM eat 10 A A Re E 12 2 GOMMECL MOUSE csi ii Ai ies 12 Ee EE 13 3 Basic Function Instruction ceeeeeeeeeeeeeeue ne nuhnnhmhh nua RR RR IR RRRRR ARR nana narran rana nrnnnnaneananes 14 SA MET 14 SM ZR NETT 14 S EA ei o EE 14 C2 e t 15 A M E V M 15 Bu DEVE IUD CE assa og a NN NEN fe lag Ne A a E O O 16 murine ida 17 e AS Ie OFM eA Ne RETE Omnem 18 AS A 18 AE MESAS aa Ns 19 D d EE 20 User Manual SA AVS CO TIGA OM Met c MP 20 A O A A PSP PER 20 A mme 21 o A MM M AOS 22 E 22 sog Record con IU TE E T T oo Lo o EL ER 23 E D UU Md E EI 23 ee EE 24 4S A M epee eee ee 24 ee 25 49 CCV CIS TECON nO E D CUL EU DR ooo ERA uk anaes CR DR RC acre 26 E EE EE 26 4A Schedule tele e EE caca 26 ES A A A A A n tm 26 4 A2
36. ax Group 18 Current Group t Default Fig 4 9 live configuration Spot 4 2 4 Mask User can setup private mask area on the live image picture max threes areas LIVE Setup mask area click Setting button and then enter Live Main Monitor Spot Mask into live image Next press left mouse and drag mouse to em Mama set mask area referring to the left picture Click Apply 1 Setting button to save the setting 2 Setting Delete mask area select a certain mask area and left 3 Setting click to delete that mask area Then click Apply button to 4 save the setting i Setting Default Fig 4 10 live configuration mask DVR User Setup mask area live image mask area 4 3 Record configuration Record configuration includes six sub menus enable record bit rate time recycle record stamp and snap 4 3 1 Enable Step1 enter into system configuration gt record configuration enable refer to Fig 4 11 RECORD X Step2 tick off record audio and record time Step3 user can setup all channels with same parameters OM Read wh tick off all then to do relevant setup Enable Record Bitrate Time Stamp Recycle Record Snap Y Parameter Meaning Record Record switch of every channels Y Y Y Y Y Enable live record audio Default Fig 4 11 record configuration enable ZU ser Manual 4 3 2 Record stream RECORD Stepi enter into system configuration record Time Stamp Recycl
37. ce will appear a hide button Click this button to expand the whole interface n BACKUP CH StatTime EndTime 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 05 04 2011 17 00 06 CM 4 Start Time O A 25 2 00 8 00 p 2 3 4 5 6 D 8 9 SES ES S TESTES PSST lt I A ES ES EEES SI KS L ES L N l Backup l Search Fig 5 4 backup configuration DVR User Me 6 Manage DVR 6 1 Check system information Check system information includes five submenus system event log network and online user 6 1 1 System information In this interface user can check the hardware version MCU version kernel version device ID etc 6 1 2 Event information In this interface user can check record events according to the set date Note if there are overlapping files a character will show behind the channel ID 6 1 3 Log information In this interface user can check relevant log information according to set date User can export the data files into mobile storage devices as backup function
38. ck auto scan or cruise in this interface User can refer to PTZ configuration for more details Snap click this button to snap the live pictures These pictures will automatically be saved in the SATA disk Record Click this button user can start manual record Playback Click this button the device can playback the record files User can click button and drag the tool bar anywhere on screen display with the left mouse Click Menu Le Bouton to ndr ll vv ser Manual display Login window Input the user name and password to logon the system interface as shown in Fig 4 2 To see the main menu press MENU button on the front panel or operate with remote controller Clicking Setup icon will pop up the configuration menu MAIN MENU gt o Backup gt po Upgrade Q EN Search di information Manual Alarm Disk Management Shut Down H 264 Fig 4 2 system setup 4 1 Basic configuration Basic configuration includes three sub menus system date amp time and DST 4 1 1 System BASIC Step1 enter into system configuration basic o Date amp Time DST configuration gt system refer to Fig 4 3 Device Name Device ID Video Format Password Check Show Time Show Wizzard Max Network Users Monitor Language f Default Fig 4 3 basic configuration basic Step2 in this interface user can setup the device name device ID video format max network users VGA resolution and language The defi
39. column Step 4 double click an unlocked item to playback Note when the monitor resolution is VGA800 600 the file management interface will appear a hide button click this button the whole interface can be expanded 5 4 Image In this interface user can set start end time and channels to search the captured images and save lock or delete these images There are at most 2000 images which can be saved in the SATA disk If there are more images saved in the SATA disks than 2000 images those additional images will supersede prior images Double click the image with the left mouse it will automatically playback from the time of the image captured 5 5 Backup This unit supports backup by built in SATA DVD Writer with USB Flash through the USB port on the front panel User also can make backup by IE browser via internet Refer to 7 3 2 Remote backup Step 1 enter into backup configuration referring to Fig 5 4 Step 2 set the start amp end time and select channels After clicking Search button the searched data will be displayed in the data backup list box Step 3 select a data file or tick off All to select all data files Click Backup button to display Backup information dialog box Step 4 in the backup information interface user can check the relevant information of backup files storage type save file type etc click Start button to starting backup Note when the monitor resolution is VGA800 600 the file management interfa
40. cord Schedule record Fig 3 2 live preview interface le 4 Hs a bes L Pu d p e DIE reinicia Esa t geg 93 53 last segment of record play process next segment of record Fig 3 3 live playback 4 Main menu setup guide From the live screen right click or press ESC button on the front panel to display the control bar at the bottom of the screen refer to Fig 4 1 screen mode volume snap playback l mu www LL function menu dwell E zoom Fig 4 1 main menu toolbar Click the E amp icon beside the screen display mode to display a channel select dialog 6 8 13 channels can realize single channel big screen Images can drag to any place to display in the live interface Dwell Dwell means to display live images from different cameras in a sequence The images may be displayed as a single channel or in a grid fashion from different cameras Dwell mode is enabled only when the chosen display mode is not able to display all the available cameras Color Click this button to adjust the color of live pictures E Zoom Single channel large screen electronic amplification Left click the channel which needs to zoom Right click select Zoom in button and then click to amplify the image Left click amp hold to drag the image Double click to exit right click to return to the main interface Volume Enable sound PTZ Click the PTZ button to control rotation position speed of the dome enable wiper and light and start tra
41. default button to e resort default setting click OK button to save the Hue d setti ng Step4 user can setup all channels with same parameters d e tick off all to do relevant setup Contrast Default OK Fig 4 7 live color adjustment 4 2 2 Main monitor Step1 enter into system configuration live configuration main monitor refer to Fig 4 8 Step2 select split mode 1x1 2x2 2x3 3x98 4x4 5x5 6x6 and channel LIVE Step3 dwell time the time interval for a certain dwell picture display switching to next dwell picture display Step4 while selecting the split mode user can setup the current picture group Click button to setup the previous channel groups of dwell picture and click button to set the latter channel groups of dwell picture Live Main Monitor Spot Mask Split Mode 2 gJ f Default Apply Fig 4 8 live configuration host monitor ZU ser Manual 4 2 3 Spot Step1 enter into system configuration live configuration Spot refer to Fig 4 9 Step2 select split mode 1x1and channel ve x Step 3 dwell time the time interval for a certain dwell picture display switching to next dwell picture display Step 4 while selecting the split mode user can setup the Live Main Monitor spirit Mask Split Mode 1x1 E S current picture group Click button to setup the 4 Dwell Time A previous channel groups of dwell picture click button to set the latter channel groups of dwell picture M
42. e Record Snap configuration 2 record bit rate refer to Fig 4 12 Max Bitrate Step2 setup rate resolution quality encode and max bit stream Step3 user can setup all channels with same parameters tick off All then to do relevant setup Note if the rate value set is over high the maximum resources of the device the value will be adjusted automatically Fig 4 12 record configuration record bit rate Definitions and descriptions of Record stream 4 3 3 Time Parameter Meaning Rate Range from 1 30 NTSC 1 25 PAL Support CIF and D1 The higher the value is the clearer the recorded image is Six options lowest lower low medium higher and highest Encode VBR and CBR Max bit stream Range from 64 Kbps 128 Kbps 256 Kbps 512 Kbps 768 Kbps 1Mbps 2 Mbps Step1 enter into system configuration record configuration time refer to Fig 4 13 Pre alarm record time the record time before event happen i e record time before motion detection or sensor alarm is triggered 2 dg Post alarm record set post recording time after the alarm is finished options 10s 15s 20s 30s 60s 120s 180s and 300s Expire time the hold time of saved records If the set date is overdue the record files will be deleted automatically Step2 user can setup all channels with same parameters and then tick off all to do relevant setup RECORD Enable Record Bitrate Stamp Recycle Record Snap Pre alar
43. e battery cover Y Notice Frequently defect checking as following 1 Check batteries poles 2 Check the remaining charge in the batteries 3 Check IR controller sensor is mask If it still doesn t work Please change a new remote controller to try or contact your dealers The interface of remote controller is shown in Fig2 3Remote Controller POWER INHO Fig 2 3Remote Controller Item Name Function 6 SEARCH Button Toentersearchmode 1 1 1 8 ENTER Button To confirm the choice or setup o 9 Direction Button Move cursor in setup or pan title PTZ o gt VR User Manual Function AUDIO Button To enable audio output in live mode Auto Dwell Button To enter auto dwell mode BACKUP Button To enter backup mode PTZ Control Button EE PTZ camera Move camera ZOOM FOCUS IRIS SPEED Operation processes with remote controller to control multi DVR The device ID of the DVR is O It s not necessary to reset the device ID when a remote is to be used to control a single DVR However when controlling multiple DVR with multiple remote controllers the user would need to configure the device ID please refer to below steps Step1 Activate remote controller to control DVR Turn the IR sensor of the remote controller to the IR receiver that on the front panel press the number key 8 twice then input device ID of the DVR to be controlled Range from 0 65535 the default device ID
44. e will appear some text n EE pve User Manual information on the lower right of the live image 4 5 5 Alarm out Alarm out includes three sub menus alarm out schedule and buzzer Alarm out Step 1 enter into system configuration gt alarm out refer to Fig 4 28 Step 2 in this interface user can set relay alarm out ALARM OUT name and select hold time which means the interval FEY dute Buzzer time between the two adjacent alarms ae ELE Step 3 user can setup all channels with same RATA a parameters 2 Schedule u Step 1 enter into system configuration schedule Default Apply Exit Step 2 the setup steps of alarm out schedule are Fig 4 28 system configuration alarm out familiar with schedule user can refer to 4 4 1 Schedule for details Note the default schedule of motion detection is full selected that is the color of schedule setting interface is blue 3 Buzzer Step1 enter into system configuration buzzer Step2 tick off Buzzer and set buzzer alarm hold time 4 6 Network configuration Network configuration includes four submenus network sub stream Email and other settings 4 6 1 Network Step 1 enter into system configuration network configuration network refer to Fig4 29 Step 2 HTTP port the default value is 80 If the value changed user needs to add the port number when typing IP address in IE address blank i e set HTTP port to 82 IP address http 192 168 0 25 user needs to in
45. enable audio Full screen In the full screen status the live preview picture will display with full screen the tool bar will be hided double click left mouse or click right mouse to return Zoom in Single channel large screen electronic amplification Left click the channel which needs to amplify Click the right mouse select Zoom in button and then click the left mouse to amplify the image Press left mouse to drug the cursor user can view the image Double click the left mouse to exit Click the right mouse to return to the main interface 7 4 Remote playback amp backup 7 4 1 Remote playback Click button to enter into record playback interface refer to Fig 7 4 Select the record date and channels double click the file name in the file list box user can play that file and preview the picture 2009 1224 a v 00 00 00 00 00 00 CAM1 CAM2 CAM3 CAMA ICAM Ml File Name chan Time Lenc 20091224001802 01 avi CAM1 00 18 02 20091224062357 15 avi CAM15 06 23 57 20091224062529 09 avi CAM9 06 25 29 2 3 20091224062750 07 avi CAM7 06 27 50 20091224062751 16 avi CAM16 06 27 51 20091224062952 08 avi CAMS 06 29 52 20091224063015 05 avi CAMS 06 30 15 20091224063102 06 avi CAM6 06 31 02 _ xxx 20091224063127_11 avi CAM11 06 31 27 2009 0842 09 15 51 48 20031224062529 09 avi 06 25 29 fast forward previous file full screen play pause stop next frame next file path volume Fig 7 4 Play
46. er Manual Item Name Function BACKUP Enter backup mode in live SEARCH Enter search mode Function Ep Rewind ooo button M Fast forward B Record manually TW Play Pause Jog dial Control rewind fast forward frame when playing the image mm To connect external USB devices like USB flash USB HDD for H backup or update firmware or connect to USB mouse 2 3 Rear Panel Instructions DVR User Manual 2 006 3 Fig 2 2 Rear Panel for 32 Channel Item Name Description 1 Video out Connect to monitor o videoin Video input channels from 1 24 for 24 ch DVR 1 32 for 32 ch DVR 3 POWER INPUT AC 110Vor 110V Connect to monitor as an AUX output channel by channel Spot Only video display no menu show Audio output connect to the sound box MIC IN VGA port VGA output connect to monitor HDMI port Connect to high definition display device HDMI port USB port To connect external USB devices like USB flash USB HDD P for backup or update firmware or connect to USB mouse Network port E SATA Connect to HDD for backup ALARM IN Connect to external sensor1 16 VR User Manual Description POWER POWER Snitch ono For cooling the device 2 4 Remote Controller It uses two AAA size batteries and works after loading batteries as following Step1 Open the battery cover of the Remote Controller Step2 Place batteries Please take care the polarity and Step3 Replace th
47. ernet 2 Hardware Installation ty Notice Check the unit and the accessories after getting the DVR Please disconnect the power before being connected to other devices Don t hot plug in out 2 1 Install Hard Drive amp DVD Writer 2 1 1 Install Hard Drive dm Li Notice 1 This series support four SATA hard drives or support three SATA hard drives plus one DVD writer User can also choose to install eight SATA hard drives or four SATA hard drives plus one DVD writer Here take eight SATA hard drives installation for example Use the hard drive the manufacturers recommend specially for security and safe field Please refer to Appendix C Compatible devices 2 Please calculate HDD capacity according to the recording setting Please refer to Appendix B Calculate Recording Capacity Step 1 Unscrew and open the case and then unscrew the screws in the both sides to take out of the upper iron bar as shown below a Step 3 Install other three HDD according to above mentioned method Then cover the upper iron bar and screw it firmly Put the HDD under it and screw firmly as shown below Step 4 Install other three HDD under the upper iron bar as shown below Manual 2 1 2 Install DVD Step 1 Unscrew and open the case Then unscrew the screws in the both sides to take out of the upper iron bar as shown below Step 2 Install the DVD holder attached with the device Please let the screw holes of
48. ete a server list ndr BS DR User Manual 6 T Software configuration Alarm type MVideo loss Motion alarm Sensor alarm Alarm output type W Audio alarm MVibrate alarm Information view gt upertam Device Device name EDVR Device ID 0 Software version 3 1 2 P Build date 19740305 Phone Software version 2 1 0 Build date 2010 08 16 Alarm type Setup the type of background alarm Video Loss Sensor Motion Alarm output type Setup prompt type of backgound Alarm sound alarm bibrate alarm Device ID the current connection device ID Software version the current connection device software version Build date the current connection device build date Software version the software version of mobile phone in use Software build date the software build date of mobile phone in use DVR User Mar Appendix A FAQ Q1 Why the DVR cannot start after connected to the power a The adapter has been damaged Please change an adapter b The power of the adapter is not enough Please remove the HDD to check c Hardware problem Q2 There is not menu output or only has live image display a Check up whether other devices can display menu or long press ESC key to wait for login dialog box to appear Q3 The indicator of the DVR lights but no output Why a The power of the adapter is not enough Please remove the HDD or change an adapter to try b The video format of the DVR is different fr
49. fig Playback Backup Media Search View Information Error User Manual 8 Mobile Surveillance This DVR supports mobile surveillance by Iphone Gphone blackberry or smart phones with Windows mobile and symbian OS At the same time it supports 3G network We tested Dopod D600 WM5 and Dopod S1 WM6 which work fine with the DVR It wants to make mobile surveillance need first enable network service on the DVH and refer to Chapter 4 6 Network configuration The below is the use instructions on mobile client end for two OS 8 1 By Phones with Windows mobile Step1 Firstly activate the network access on mobile phone and then run Internet Explorer Input the server s address and the connection is built up shown as below picture in the left Step2 Click on the software name A dialog box pops up as below picture in the middle Step3 Click Yes to start downloading and installing Step4 PCam will be opened automatically after installed Refer picture in the right TS X http http 192 168 3 135 PcamEn htm 192 168 3 135 PcamEn http 192 168 3 135 PcamEn htm v e back Refresh Internet Es Y 2 Yj d 10 36 http 192 168 3 135 PcamEn htm e e Pocket Camera gt LSU e Server 192 168 3 35 Go admin Password ees EL User qeu PCam v1 1 2 624 Tip You wil see a message appear like the following after you click the Update URL please click the Yes
50. files before all recorder files before delete all current video files all current video files Information view SuperCam Device ID the current connection device ID Device Software version the current connection device Device ID 0 software version Software version 2070100 Build date the current connection device build date Build date 20100401 Software version the software version of mobile Phone phone in use Software version 2 1 2 Software build date the software build date of mobile Software build date 2010 05 15 phone in use DVR User Ma 8 5 Installation and operation Methods for BlackBerry Mobile phone Client 8 5 1 Installation instruction for BlackBerry Mobile phone Client 1 Open the browser of BlackBerry phone and enter sever address 2 Click SuperCam to link Browser D 30 3g Tal WebCam cud 3g Tal http wanjunjie meibu com 6070 f WELCOME Bookmarks 2 Supsrcam for BlackBerry Home Page BlackBerry Bookmarks This software is designed for BlackBerry OS above 4 5 If you use BlackBerry storm 9500 or 9530 You will have a compatible probler just choose Option menu gt Advance options gt Application gt SuperCan SuperDVR components SuperCam SuperCamf 2 0 ion 2 0 unknown e 225 3KB Downloading SuperCam cation permissions dert 4 Finished downloading the software will be installed automatically ye VR User Manual Download SuperCam SuperCam
51. ft and then setup the relative parameters When one user setup parameters of a certain item others cannot setup this one Click Config to enter into the below interface refer to Fig 7 10 Record Schedule Alarm Network P T Z Users ARETES d Advanced sub menu The sub menu lists and the options in every item are similar with those on the DVR Please Guide for more details main menu LIVE SEARCH BACKUP CONFIG Local Config TOOLS INFO Local View Snap Path E Browse Snap Amount 4 D Remote Playback Snap Path C Users kevin Documents Browse Snap Amount 10 v Local Record Save Path F 15 Browse Record Channel 1 2 3 v 4 5 6 7 8 ER v 10 v 11 v 12 v 13 v 14 v 15 v 16 O 17 Dis 19 020 Cla 122 123 C24 O 125 126 127 128 129 130 131 132 Audio Channel Apply Default Fig 7 10 remote menu setup refer to Chapter 3 Main Menu Setup Click Apply button to save above settings click default button will recover the original settings geir 7 6 Remote Management Remote Information Search The system will automatically record the working condition and operation process during the period of work User can view information such as username IP address and so on Enter into INFO Log user can set the start time to view the log record as follows CONFIG SEARCH BACKUP Apple PC Here we only take IE remote access
52. ients connecting PC Module Intel Celeron 2 4G Motherboard Intel 845 HDD o User Man AMA NVIDIA GeForce MX440 FX5200 ATIRADEON 7500 X300 Windows 2000 SP4 above Windows XP SP2 above VISTA Lt saa a Q13 What are the PC configurations for 16 ch real time product with fully open channel mainstream VGA GMA3100 NVIDIA GeForce 8400 ATI RADEON HD3450 Windows 2000 SP4 above Windows XP SP2 above VISTA DiecX 90 L 0 0 Q14 How to handle the situation when codec Control is blocked to install in the VISTA or Win7 system If user gets this problem may have two ways to fix it a Enter Control Panel User Account and Family Safety gt User Account Control refer to below picture click Turn User Account on or off Cancel Use User Account Control UAC to help protect your computer fanual aa A A gt EI Turn User Acco E Search P Turn on User Account Control UAC to make your computer more secure User Account Control UAC can help prevent unauthorized changes to your computer We recommend that you leave UAC turned on to help protect your computer Use User Account Control UAC to help protect your computer b Right click IE browser refer to Fig 14 2 select Run as administrator to run browser Open file location Run as administrator Restore previous versions Send To Cut Copy Create Shortcut Delete Rename
53. ion Symbian OS v9 4 oymbian S60 5 1 Edition Symbian OS v9 5 Step1 Firstly enable the network access on mobile phone Then run Web browser Step2 Input the DVR server s IP address in a new built bookmark Click this bookmark to connect to the DVR Refer picture in the left Step3 A welcome window will pop up and requires a package Click the software name to download Refer picture in the right 22 Bookmarks WELCOME P WM abc O ULL The mobile phone was iu i i i Veb feeds detected based on symbian Live view to do mobile live view ly Saved pages Nia EE Image view to check the pictures y Auto bookmarks i e za ii Stam 3 080533 sisto install Snapped In le view SCam 3 080939 sis i E i e System setting Login setting ei httpt 210 21 229 142 111 SuperDVR components And Alarm setting Goto nel Options Te Help function indication and help Step4 A security windows will pop up after downloading and ask if install the package Click YES to install Step5 A Scam shortcut icon appears on the system menu after finished Step6 Run Scam program It will enter a function interface Refer picture in the left Step Click System setting gt Login Setting to enter login interface Refer picture in the right ee 4 Pocket Camera Q Image View System Setting Help A E cancel e Login Setting HttpPort 1110 Username Password T H E Winsock
54. lay in the Network Tasks list box please follow the below operation e Click Tools Folder options e Select the Show common tasks in folders in the Tasks check box to display the UPnP icon Tools Folder Options General View Tasks 5 Show common tasks in folders O Use Windows chene folders T s Domain name Registration Take www dyndns com for example Note Users can self define the hostname username and password Input www dyndns com in the IE address bar Click Dynamic DNS service y as follows user can access the domain name registration interface Create Free Hostname to register For example Hostname is abc dyndns tv The picture is shown Ele Hostname Wildcard Status Service Type Mail Routing abc dyndns tv v Disabled Want Wildcard support 9 Host with IP address WebHop Redirect Offline Hostname 210 21 229 138 Your current location s IP address is 210 21 229 138 TIL value is 60 seconds Edit TTL C Yes let me configure Email routing 2 After user fill in the blank click Add to cart Then Dynamic DNS Hosts dialog box will be displayed Next create user account For example the username is bcd password is 123456 Username Password Confirm password Email Confirm Email Security Image Subscribe to abc yahoo com cn abc yahoo com c
55. lect any channel and multi channels as linked channels Click OK button to save the setting click Exit button to exit the current interface Step4 user can setup all channels with same parameters Tick off all to do relevant setup 8 Schedule Step1 enter into system configuration alarm SENSOR configuration sensor schedule refer to Fig 4 22 Basic Alarm Handling Sthedul Step2 the setup steps of sensor schedule are familiar Gier with schedule user can refer to 4 4 1 Schedule for Sunday Monday details Tuesday Wednesday Note the default schedule of sensor is full selected GE that is the color of schedule setting interface is blue rey Saturday Apply Settings to Fig 4 22 sensor schedule 4 5 2 Motion Motion includes two sub menus motion and schedule D Motion Step 1 enter into system configuration alarm configuration motion refer to Fig 4 23 yy e DVR User fa Step 2 enable motion alarm and set alarm hold time LISTED which means time interval between two adjacent Motion Schedule detective motions If there is other motion detected Enable Holding Time S Trigger res during the interval period it is considered continuous Setting Setting movement otherwise it will be considered that those Setting Setting two adjacent detective motions are two different motion Setting Setting events While clicking Trigger a window will pop up Setting Setting Step 3 the setup steps
56. m Record Time S Post alarm Record Time S Expire Days v 130 Y Never 30 v Never 30 Y Never ZU Yx Never Yx Never f Default f Apply Fig 4 13 record configuration time 4 3 4 Stamp Stamp User can overlap the channel name and time stamp on video RECORD X Step1 enter into system configuration record Enable Record Bitrate Time neni Recycle Record Snap configuration gt stamp refer to Fig 4 1 4 MMM Step2 tick off camera name time stamp click Setting button User can use cursor to drag the camera name and time stamp in random positions referring to below Figures Step3 user can setup all channels with same parameters Tick off all to do relevant setup CH Camera Name Time Stamp Position 1 Y Y Setting Y Y Setting 2 3 Y Y f Setting 4 Y f Setting f Setting f Default Fig 4 14 record configuration stamp DVR User Manual 04 29 2010 16 04 40 CAMERA NA 4 29 2010 16 04 40 CAMERAO2 Before drag after drag 4 3 5 Recycle record Step1 enter into system configuration gt record configuration gt recycle record Step2 tick off recycle record to enable the recycle record function It will cover the earlier recorded files and keep recoding when HDD is full if user disenables this function it will stop recording when HDD is full Step3 click default button to resort default setting click apply button to save the setting click exit button to exit current interface
57. ment Step 1 enter into Search configuration gt file management refer to Fig 5 3 SEARCH X Time Search Event Search File Management Search Start Time End Time Status 2011 E 05 04 2011 17 00 06 05 04 2011 17 00 06 Writing Su Mo Tu We Th Er Sa 05 04 2011 17 00 06 05 04 2011 17 00 06 Writing ilala 5 6 7 05 04 2011 17 00 06 05 04 2011 17 00 06 Writing 1 30 12 18 04 eener CECI mees MO Uy Qe 0o 2 2 05 04 2011 17 00 06 05 04 2011 17 00 06 writing By BO 2 ZU Be 05 04 2011 17 00 06 05 04 2011 17 00 06 Writing il 05 04 2011 17 00 06 05 04 2011 17 00 06 Writing 05 04 2011 17 00 06 05 04 2011 17 00 06 Writing 05 04 2011 17 00 06 05 04 2011 17 00 06 Writing 05 04 2011 17 00 06 05 04 2011 17 00 06 Writing 05 04 2011 17 00 06 05 04 2011 17 00 06 Writing 1 2 All CW gt SUISSE ll el vs ls SISIK AOIS el vs ls Si lel kel el ll deel vs les ISK AOIS A S IS Delete Fig 5 3 Search configuration file management Step 2 After clicking Search the searched files will be displayed in the file list box user can select date and channels accordingly Lock select a file and click Lock button to lock this file after that that file will not be deleted or covered Unlock select a locked file and click Lock button to unlock this file eel DVR User Mc Delete select an unlocked file and click Delete button to delete this file Step 3 After clicking All user can lock unlock or delete all files in the file management
58. n J 7 A s ES i Za x RN d Y RN R w T y wf ob A a 3 LA vis i TEN M b 7 O SES Ke ES NC 1 to E Kai der 1 AE L PN N BFS PENA A Ra be y VEN as x TR Yu Enter the numbers from the above image 52517 CT DynDNS com newsletter 1 or 2 per month CT Dyn Inc press releases Iagree with the acceptable use policy AUP and privacy policy Create Account Click Create Account button to create user account 2 DVR Setting 1 Domain name According to the domain name registration of DDNS the domain name for DVR is abc dyndns tv EA Manual 2 Username and password According to the above registration username is bcd According to the above registration password is 123456 3 Application Connect DVR to the Network Client Enter into Main menu gt Network gt other settings tick off DDNS select Dyndns at the DDNS Sever pull down list box and input user name and password 2 Enter into configuration interface of the router to map the server port and IP address if the user enables UPnP function he can skip this step Click Save button to save the setting 3 Login IE browser and input registered domain name http www abc dyndns tv connect to DVR client If the value changed user needs to add the port number when typing IP address in IE address blank Le set HTTP port to 82 IP address http 192 168 0 25 user needs to input that address http 1
59. n and make sure it is corresponding with the DVR User can check the USB information in Disk management Upgrade method the user needs to copy the upgrade software which gets from vendor into the USB storage device and then connect it to the USB port Enter Menu Upgrade the upgrade software name is displayed in the upgrade list box Next select that software and then click upgrade button It will upgrade automatically Please wait for a while when the system is rebooted Never cut off power during upgrading 6 5 Logoff While clicking Log off icon a log off dialogue box will popup Then click OK button to log off If user wants to log in again click icon to enter into user name and password to re login E DVR User Ma 7 Remote Surveillance 7 1 IE Remote Surveillance In order to view the DVR from a network it must be connected to a LAN WAN or internet The network setup should be done accordingly Please refer to 4 6 Network Setup This DVR supports IE browser on Windows XP and Vista platform 7 1 1 On LAN Step 1 Enter into the DVR s Main Menu Setup Network interface to input IP address Subnet Mask etc If using DHCP please enable DHCP in both the DVR and the router Step 2 Enter Record Setup to set network video parameters like resolution frame rate etc Step 3 Open IE on a computer on the same network Input the IP address of the DVR in IE address bar and press enter Step 4 IE will download ActiveX component automatically
60. nitions for every parameters display as below Device name the name of the device It may display on the client end or CMS that help user to recognize the device remotely Video format two modes PAL and NTSC User can select the video format according to the camera Password check If enabled the user would need to input the user name and the password for performing corresponding operations Show time display time in live DVR User 1 Show wizard if this item is selected there will display an opening wizard with time zone and time setup information Max network uses set the max user amount of network connection VGA resolution the resolution of live display interface range from VGA800 600 VGA1024 768 VGA1280 1024 and CVBS Note When switch between VGA and CVBS will change the menu output mode please connect to relevant monitor Language setup the menu language Note After changed the language and video output the device needs to login again 4 1 2 Time amp date BASIC System Date amp Time DST Date Format MM DD YY Time Format 24 Hour Time Zone GMT Sync Time With NTP Server NTP Server time windows com System Date 05 04 2010 25 System Time Default Fig 4 4 basic configuration time date Step1 enter into system configuration basic configuration time amp date refer to Fig 4 4 Step2 set the date format time format time zone in this interface tick off sync time
61. nternet Options 2 select Security Custom Level Refer to Fig 8 1 3 Enable all the sub options under ActiveX controls and plug ins refer to Fig 8 2 4 Then click ok to finish setup b Other plug ins or anti virus block ActiveX Please uninstall or close them Internet Options Security Settings General Security Privacy Content Connections Programs Advanced Settings Select a Web content zone to specify its security settings ei Enable zi DI Download signed Activex controls 8 Disable Internet Local intranet Trusted sites Restricted Enable sites Prompt EES 164 Download unsigned Activex controls This zone contains all eb sites you Em Disable haven t placed in other zones Prompt Security level for this zone 164 Initialize and script Actives controls nok marked as safe Disable Custom Enable Custom settings Prompt To change the settings click Custom Level Eh To use the recommended settings click Default Level t M ve A A AAA Reset custom settings Dead Level eerie Apply i Fig8 2 Q9 How to deal with when DVR starts it displays please wait all the time sE VR User Manual First possible reason hard disk cable and data cable are not well connected Solution Please check the connection of hard disk cable and data cable and make sure they are well connected If still not working please unplug them and then try re plugging again Second p
62. o d Geib Fie ida Captere Window Hep m gi n 0 X me F Show In Finder k m gt Vester cay B Mel ag Show Package Contents p fus wes G Meret Moe bo Trai P e As magos UA n Geet w a A Zens E Pros buet Compress SalirLaso J T Arenas Gun Saltar to Duc Lal Q Qon Duplicate E dis r a7 Make A as i Quick Look Safari app Weken as Bl eem Copy Safari sg y edt Ll d terms Grow View Deen e Ae og Mit J We zgenb AA NN EE P Third Select open in 32 bit mode Im Venim 110 d Copia Pie TOR Appia iur NE DL dora batas eB ARBYES3e65 dr E PA Pos hia albo orl 7 2 1 On LAN Step 1 After starting Apple computer click ea icon The following window will pop up Please select System LI EA A A T Preferences gt Internet amp Wireless gt click Network About This Mac Software Update Mac OS X Software System Preferences Dock b Recent Items b Force Quit Finder XRO Sleep Ha Restart Shut Down Log Out coodoo THQ Internet amp Wireless H x Bluetooth Sharing Step 2 Enter into Network interface and then click Ethernet Connected to check the internet connection of Apple PC 4 Show All a Location i Automatic Status Connected o D o Bluetooth DUN Ethernet is currently active and has the IP J address XXX XXX XXX XXX Configure IPv4 Manually e FireWire 2g
63. of motion trigger are familiar with alarm handling user can refer to Chapter 4 5 1 Sensor gt alarm handling for more details Step4 while clicking Area button a window will pop up as Fig 4 24 Fig 4 23 alarm configuration motion f Default Sensitivity 6 Fig 4 24 motion area Step 5 in the Area interface user can drag slide bar to set the sensitivity value 1 8 the default value is 4 The higher the value is the higher sensitivity you get Due to the sensitivity is influenced by color and time day or night user can adjust its value according to the practical conditions click da icon to set the whole area as detection area click icon to clear the set detection area click E icon to test whether the sensitivity value and motion area are suitable accordingly referring to following picture Click icon to save the setting click icon to exit current interface EK R User Manual Sensitivity 6 Note when users drag mouse to set motion detection area they have to click E icon to clear all set detection area firstly and then make the operation Step 6 user can setup all channels with same MOTION parameters Motion Sanaa 2 Schedule Step 1 enter into system configuration gt alarm Sunday configuration gt schedule refer to Fig 4 25 Step 2 the setup steps of alarm schedule are familiar et with schedule user can refer to 4 4 1 Schedule for Friday details Saturday Apply Settings to All
64. om that of the monitor c Connection problem Please check the cable and the ports of monitor and DVR Q4 Why are no images displayed on parts or all of the channels of the DVR a Connection problem Please check the cable and the ports of camera and DVH b Camera problem Please check the cameras c The video format of the DVR is different from that of the cameras Please change DVR system format Q5 Cannot find HDD a The power of the adapter is not enough Please change an adapter to try b Connection problem Please check the power and data cables c The HDD is damaged Change a new one sE Q6 Cannot record a Don t format HDD Please format it manually first b Don t enable record function or incorrect setup Please refer to Chapter 5 Record search amp playback and backup c HDD is full and not enables recycle function Please refer to Record Configuration Chang a new HDD or enable recycle d The HDD is damaged Change a new one Q7 Cannot use mouse a wait 1 2 minutes after mouse connected b Not detected Plug unplug several times c The mouse is incompatible Please change a mouse Q8 Cannot download ActiveX control a IE browser blocks ActiveX Please do setup following below D Open IE browser Click Tools Internet Options A about blank Microsoft Internet Explorer File Edit View Favorites nm Help Mail and News Synchronize Windows Update Show Related Links I
65. ossible reason It is forced to stop because hard disk has disabled track which causes the system checking hard disk cannot skip Solution Change another new hard disk or reformat the broken one Q10 How to input password and digital numbers The method to input password and digital numbers is to click the box behind password or items needing to input by numbers and then the small keyboard will appear Please select number or letter to input the initial password is 123456 or you can use the digital keys in the front panel or the digital keys on the remote controller Q11 Why is the hard disk used in a DVR identified a new hard disk if directly used to another same type DVR And why must we format it again When DVR only uses one hard disk the hard disk removed from one to another same type DVR can work normally without format However when a DVR adds to a new hard disk it will identify the hard disk as a new one and inquire whether to format no matter whether this hard disk used or not in another same type DVR before In this condition it can be used normally after formatted according to the guide if two or more hard disks used in different DVR when used in another DVR with the same type they will be identified to be two or more new hard disks and all of them need to format In general please do not try using more disks removed from different DVR into another one in case the data lose Q12 What are the minimum configurations of PC for cl
66. put that address http 192 168 0 25 82 into IE browser A NETWORK Server port communication port Network Sub stream Email Other Settings Step 3 If user selects the Obtain an IP address automatically the device will distribute IP address GEES subnet mask and gateway IP and DNS server TS WHEN ESOO Step 4 enable PPPoE to directly connect the DVR to Subnet Mask 255 255 255 000 internet via ADSL and then input the user name and Ge EE password Next click TEST button to test the ee 000 009 000 000 effectiveness of the relevant information HTTP Port Server Port 6036 Alternate DNS Server 000 000 000 000 FIERE User Name Password f Default Fig 4 29 network configuration network 4 6 2 Sub stream a Step 1 enter into system configuration network aert gs configuration sub stream refer to Fig 4 30 cuela Lie s Step 2 select fps resolution quality encode and max bit 512 kbps Mf 3 P rate 512kbps 7 otep 3 user can setup all channels with same parameters Tick off all to do relevant setup Default Exit Fig 4 30 network configuration sub stream EE pve User Manual Definitions and descriptions of Sub stream Parameter 1 Meaning FPS Range from 1 25 Support CIF Quality The quality of the clients image The higher the value is the clearer the record image Six options lowest lower low medium higher and highe
67. ration right for that user RW Step 3 in the user management interface click Setup 7 Live View button to modify user name user type and binding PC lm lm mul m MAC address lares le ES Step 4 select the user that user wants to delete in the y 2 M7 27 28 user list box and then click Delete button to delete this En ESTE user Fig 4 35 add user authority Step 5 click Change password button to modify the password click Exit button to exit the current interface DVR User Mc 4 8 P T Z configuration P T Z configuration includes two submenus serial port and advance 2 Serial port pes Step 1 enter into system configuration gt PT Z E configuration serial port refer to Fig 4 36 Step 2 tick off Enable and then setup the value of Enable Address Baud Hale Proloco r sea0 PFL COR E ps0 E address baud rate and protocol according to the 8 ES E d settings of the speed dome ee Step 3 user can setup all channels with same asoo gt PEICOP parameters Default Fig 4 36 P T Z configuration serial port Definitions and descriptions of network stream Parameter Mesmning The address of the PTZ device Baud rate Baud rate of the PTZ device Range form 110 300 600 1200 2400 4800 9600 19200 34800 57600 115200 230400 460800 921600 Protocol Communication protocol of the PTZ device Range from NULL PELCOP PELCOD LILIN MINKING NEON STAR
68. record file interface This DVR supports remote time search event search and file management By Time Search Step1 Enter into Search gt time search refer to Fig 7 5 Start Time Fi ts 2011 04 28 Tas 00 00 00 Sun Mon Tue Wed Thu Fri Sat Ds Cu Ou O12 ni O2 126 Ca 128 129 Can O31 032 Channel Mm Ma Ma Ma m Ms Mie M7 Ms Data Information Ed ias gr Bis se Sere UTE EE TESTES EE EE E re Reeg Hd WE E EEN Eid HJ Bd ob Male hell Mul H ES EJ ET ET ESL RE Eum PITT EI II M29 M30 M31 M32 Fig 7 5 time search interface Step2 click Search button The record data will be displayed in the data information list box the highlight date in the area 2 means have record data click those data select the record channels in area 3 Step3 User can set the data playing time and display mode in the area as required Step4 Select certain item from the data information list box click play button to playback Step5 Click the relevant buttons in the interface user can do some operations such as FF pause change channel mode n research etc refer to Fig 7 6 m TEE A r MENA TOOLS INFO jm OO D Ds Os Olos Os O7 OCs Els Mio Ei Ai O O13 O14 Ois De O O17 Ois O19 Car channel mode OlDa O22 023 Ces O O O26 127 O28 O 29 O30 O31 022 GAMIOS P CAMERA dw mm A Li m Start Time 2011 84 28 play mode ICAMW2 pe play button ee progre
69. rough LAN or internet ALARM e 4 channel alarm output and 16 channel alarm input available e Support schedule for motion detection and sensor alarm e Support pre recording and post recording e Support linked channels recording once motion or alarm triggered on certain channel e Support linked PTZ preset auto cruise and track of the corresponding channel PTZ CONTROL e Support various PTZ protocols e Support 128 PTZ presets and 8 auto cruise tracks e Support remote PTZ control through internet SECURITY e Customize user right log search system setup two way audio file management disk management remote login live view E DVR User M manual record playback PTZ control and remote live view e Support 1 administrator and 63 users e Support event log recording and checking events unlimited NETWORK Support TCP IP DHCP PPPoE DDNS protocol Support IE browser to do remote view Support setup client connection amount Support dual stream Network stream is adjustable independently to fit the network bandwidth and environment Support picture snap and color adjustment in remote live Support remote time and event search and channel playback with picture snap Support remote PTZ control with preset and auto cruise Support remote full menu setup changing all the DVR parameters remotely Support mobile surveillance by smart phones symbian WinCE Iphone or Gphone 3G network available Support CMS to manage multi devices on int
70. s AAA 17 18 19 20 21 22 23 24 de ae sodes 1234567 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 H 25 26 27 28 29 30 31 32 Fig 7 2 Remote live preview interface Note click button to record manual and the record file will be saved in user s PC Screen display mode Click the icon beside the screen display mode to see the channel select box Snap pictures Click Snap icon the system will automatically capture pictures and save those pictures in the computer User should set up the save path for those picture in the Remote Preview interface Configuration Local configuration Color adjustment VR User Manual Drag the slide bar to adjust Brightness Contrast Hue and Saturation Click Default to reset them to original value Drag the scroll bar to adjust the brightness of channel Drag the scroll bar to adjust the contrast of channel Drag the scroll bar to adjust the saturation of channel Drag the scroll bar to adjust the hue of channel Click this button to recover the default value of brightness contrast saturation and hue Save the adjustment PTZ control Please connect speed dome to the device via RS485 firstly make sure the protocol of the speed dome is supported by the device and set the relative parameters manually User can control the dome up down right left or stop rotating on Control Center adjust rotation speed Iris and zoom focus on the dome and set the presets etc
71. ser is a banding domain name of DVR User should logon the website which provided by the server supplier to DDNS v DDNS Server www dwrdydns com Y User Name register a user name and password firstly and then apply for a domain name on line After the successful application user can access the server from the lE client by inputting that domain name Password Host Domain DDNS Update Hours Default Apply Fig 4 32 network configuration other settings Enable UPnP User may select UPnP and then enable UPnP function in the user s router Then user can access DVR through WAN When accessing the DVR through IE user can check the IP address by the following method Double click the My Network Places icon on the desktop in PC select Show icons for networked UPnP devices in the Network Tasks list box a information window will pop up click YES button Windows Components Wizard dialog box will pop up as shown as below picture press Next to continue After finished the installation of configuring components the UPnP icons will display Users can double click certain icon and check the IP address of the device nt OMM Manual Windows Components Wirard Geer madri Has conhgurahon changes you requested O EOS eer Tits par Lon perver al meae depending on the componen selected Suba Completng cd trgee ol riera Drei CCOO OOOO If Show icons for networked UPnP devices can t disp
72. ss bar gt m A A m 50 90 3 Deom tm amp q frame full screen ause di FF FW stop the last segment volume dios Fig 7 6 Time search playback By Event Search Step1 Enter into Search event search refer to Fig 7 7 Event list 2011 04 28 10 26 54 2011 04 28 10 39 09 2011 04 28 10 25 01 2011 04 28 10 26 02 2011 04 28 10 24 54 2011 04 28 10 25 01 Sun Mon Tue Wed Thu Fri Sat 04 2011 04 28 10 10 45 2011 04 28 10 24 54 1 2 S j amp S 6 7 8 9 2011 04 28 10 02 11 2011 04 28 10 10 38 160 133 42 349 L4 45 ds 2011 04 28 09 58 58 2011 04 28 10 02 11 17 18 19 20 21 22 23 2011 04 28 09 50 32 2011 04 28 09 58 55 24 25 26 27 MW 29 30 2011 04 28 09 44 27 2011 04 28 09 50 23 TR 2011 04 28 09 39 06 2011 04 28 09 44 19 em 2011 04 28 09 16 33 2011 04 28 09 37 17 Ms Me M7 Ms Moti 2011 04 28 08 53 31 2011 04 28 09 16 33 Els Mi Mu Mz 2011 04 28 08 47 03 2011 04 28 08 49 23 Sensor E Fig 7 7 event search interface Step2 click the highlight date select record channels and then tick off the event type motion and sensor click search button Step3 the events will be display in the event list box Double click a certain item to playback 2011 04 28 09 37 23 2011 04 28 09 39 06 Mi M2 M3 la 2011 04 28 08 49 25 2011 04 28 08 53 31 Motion EJE Mis Mis Mie d Jser Manual File Management Step1 Enter into Search gt file management refer to Fig 7 8 Sat eame Suus 2011 04 28 10 25 01 2011 04 28 10
73. st Encode VBR and CBR Max bit rate Range from 64 Kbps 128 Kbps 256 Kbps 512 Kbps 768 Kbps 1Mbps 2 Mbps 4 6 3 Email Step NETWORK Network Sub stream Email Other Settings SMTP Server Port SSL Check Send Address Password Receive Address Receive Address2 Receive Address3 Advanced Attaching Image f Default f Apply Fig 4 31 network configuration email 1 enter into system configuration network configuration gt email refer to Fig 4 31 SMTP Server Port the name and port number of SMTP server After selecting This server requires a secure connection SSL user can setup mail servers such as Gmail according to actual needs Send address password sender s email address password Receive address receiver s email address Here user can add at least three mail addresses Click TEST button to test the validity of the mailbox Attaching image After selecting it the system will attach images when sending the emails 4 6 4 Other settings Step 1 enable DDNS server user needs to input user name password and host domain name of the registered website click TEST to test the effectiveness of the relevant information Step 2 click default button to resort default setting click apply button to save the setting click exit button to exit current interface NETWORK Network Sub stream Email lother Settings Note The domain name server that selected by u
74. system configuration schedule configuration motion refer to Fig 4 17 Step2 the setup steps of motion are familiar with schedule user can refer to 4 4 1 Schedule for details ndr User Manual SCHEDULE Schedule Mottin Fig 4 17 schedule configuration motion Note the default schedule of motion detection is full selected that is the color of schedule setting interface is blue 4 4 3 Sensor SCHEDULE Step1 enter into system configuration schedule Schedule Motion OCH configuration alarm refer to Fig 4 18 pps Step2 the setup steps of alarm are familiar with schedule user can refer to 4 4 1 Schedule for details Note the default schedule of sensor is full selected that is the color of schedule setting interface is blue 4 5 Alarm configuration Alarm configuration includes five sub menus sensor motion video loss other alarm and alarm out EZ 4 5 1 Sensor Sensor includes three sub menus basic alarm handling and schedule ey Basic SENSOR Step1 enter into system configuration alarm configuration sensor basic refer to Fig 4 19 Step2 enable sensor alarm and then set the alarm type according to triggered alarm type Two option NO and NC Step3 user can setup all channels with same parameters tick off all to do relevant setup Basic Alarm Handling Schedule Default Fig 4 19 alarm configuration sensor basic 2 Alarm handling Step1 enter into system configuration alarm config
75. tch to Fig 2 interface o Snap record H g 8 Upward rotates the PTZ d ei Downward rotates the PTZ a Leftward rotates the PTZ Hn Rightward rotates the PTZ Stop rotates the PTZ Zoom In Focus In lris Add B 2 d Zoom Out Focus Out lris Sub Select the preset point Set the cruise line LE Image view Previous Iw menu 8 9 2010 13 49 55 AB B B BM DVR User Man Record playback LH Begin There B NELUETI D Play pause n Heturn to record file interface Fig 3 Fig 3 Fig 4 Click the record file Fig 3 to playback Fig 4 Server list Add a sever list Delete a server list Return to main menu Ze 4 Modify a sever list xw Config interface DVR User Manual Alarm Setting n Alarm setting Tick off Sound Alarm when Video o sound alarm Loss Sensor Motion happen trigger sound alarm Bess alarm Tick off Vibrate Alarm when X Video Loss Sensor Motion happen trigger vibrate alarm Storage Setting Storage setting User can setup the relevant parameters of mobile Si m video This function can be valid only insert SD card m Nb S is SDCard Click button to change path Reserved disk space reserved SDCard disk space when the disk space is less than setup value the video will be stopped Video clip size Single video size When the video size is greater than grep yen n SERERE value change another video files Remove all recorder
76. the DVD aim at the holder s Try to place the holder farther away from the front and then screw firmly Then put the DVD with the holder into the case and let the screw holes of the case aim at the holder s Next screw them firmly DVR User Manual 7 2 2 Front Panel Descriptions Notice The front panel descriptions are only for reference please make the object as the standard Power Button Soft switch off to stop firmware running Do it before power off DVD button Press this button user can place the DVD to do backup Digital keys 0 9 Input number 1 9 or choose camera 1 represents decade number 2 Indicates digital number 0 Eg Switch to 32 channels user can press UI 3 2 switch to 20 channels please press 0 ra 0 switch to 1channel please press 1 or press O 2 1 1 Control voice KS indio di 2 Increase the value in setup 1 Enter PTZ mode in live 6 Puen 2 Decrease the value in setup Ee on Change direction to select items Input HE 5 button Multi screen Change screen display mode like1 4 9 16 channel Enter button Confirm selection REC Whenrecording the light is blue When HDD is writing and reading the light is blue Work When backup files and data the light is blue State When access to network the light is blue indicator When playing video the light is blue Power indicator when connection the light is blue MENU Enter menu in live INFO Check recording data Us
77. uration gt sensor gt alarm handling referring to Fig 4 20 Step2 select hold time and click Trigger to display a screen as shown in Fig 4 21 TRIGGER Channel 1 lo Record To P T 7 Buzzer SENSOR Basic Miar E Sche dule Hold Time s Trigger Show Pull Screer Trigger To Alarm Qut Trigger Email Trigger Trigger Default Fig 4 20 alarm configuration sensor alarm handling Fig 4 21 alarm handling trigger r5 4 User Manual Step 3 If Buzzer is selected there will be triggered buzzer alarm out Full screen alarm when alarm is triggered there will pop up full screen alarm Email Select this function When an alarm is triggered a notification email will be sent to user s designed email box including trigger events time snap pictures device name ID camera name etc Snap Select channels When an alarm is trigged the system will automatically save the captured pictures from the selected channel If user ticks off Email function these pictures will also be sent to user s designed email box To alarm out After selecting the channel there will be triggered alarm out in the designated channel Click OK button to save the setting click Exit button to exit the current interface To record Select recoding channels It will record the camera when alarm is triggered Click OK button to save the setting click Exit button to exit the current interface To P T Z set linked preset and cruise for alarm User can se
78. word Click Remember server to save the setting click button can quick input saved server address user name and password 2 Main interface a E e Playback playback record file Image image view Log log record Server List device list device information software help view center Server List EN E T Settings _ive Information A Logoff logoff and return to software setting pain interface Live Logoff 3 Live view X a oe EH Eis a P a HE LONE H ER E TU ME ME J ER VER A LES WER HO PAM Pee PIE PL EE KR PES PEE KI PLE E H EK AS AA A d y ye VA Wm 00000000 P4 M 00000000 AB ris O i Note User can click Return button on the Blackberry phone to return the previous interface AZ Current viewing channel Channel status Switch channels g PTZ click to switch to Fig 2 interface M Background alarm NON Stop rotating the PTZ Upward rotates the PTZ d Downward rotates the PTZ 4 Leftward rotates the PTZ d P N Rightward rotates the PTZ E O N Zoom In Focus In lris Add N g Zoom Out Focus Out lris Sub Preset Select the preset point Set the cruise line Server list pertam Company address wanjunjie meibu com 6058 m Street address 192 168 3 142 1111 Add Add a server list mu Home ress wanjunjie myq see com 605 Modify Modifv a server list Add cr na Modify S Delete ress democracy meibu com 603 7 Delete Del
79. xit If there is no menu or only has live image display after the device is power on user can long press ESC button to switch Notice this serial device can only display options on either VGA monitor or BNC monitor at one time if there is live image display without menu options please check if there is display on other device monitor or long press ESC key to wait for login dialog box to appear Long press ESC key can switch the output between BNC and VGA 3 1 2 Power off User can power off the device by using remote controller keyboard and mouse By remote controller Step1 press Power button to display the Shut down window Click OK and then the unit will power off after a while Step2 disconnect the power By keyboard and mouse Step1 enter into EJ gt select System Shut Down icon Then the Shut down window will appear Step2 after clicking OK the unit will power off after a while Step3 disconnect the power a 3 2 Login User can login and logout the DVR system User cannot do any other operations except changing the multi screen display once logout LOGIN X User Name admin Password Login Cancel Fig 3 1 Login Notice the default user name and password is admin and 123456 The concrete operation steps for change password add or delete user please refer to User management configuration for more details 3 3 Live preview Symbol Meaning Motion detection record Sensor Alarm re

DVR User Manual - Security Camera Systems

Contents

Download Pdf Manuals

Related Search

Related Contents