AUTOMATIC SWINGING DOOR - Hortondoors
Contents
1. through the doorway onto the safety mat and remain motionless for four seconds The door should remain open Repeat at several locations on the mat See Figure 2 Step off the safety mat After a brief time delay at least 1 1 2 seconds the door should close to 10 from fully closed then slow down The last 10 of closing should be noticeably slowe at least 1 1 2 seconds With the door closed step on the safety mat Have someone step on the opening mat Door should remain closed as long as someone remains on the safety mat Check the mat molding and threshold It should be complete and secured with all required screws Do Not move very heavy objects over floor mats If the door has motion detector activation and floor mat safety one of the following three requirements must be met See Figure 2 A Five inches of visible safety mat must extend through the door opening onto the approach side B Provide a photoelectric door hold open beam across the door opening on the approach side C The adjustable time delay in the door operator must be set to at least 4 seconds Caution If safety mat sensor isn t working door may swing at you without stopping 4 4 149d Daily Safety Check cont Figure 3 Activating Switch Knowing Act Safety 1 Activate door with manual operating switch PRESS BUTTON see Figure 3 then release Door should hold open for 5 seconds min after release of activating sw2. Operated Pedestrian Doors Your local Horton Automatics service representative will be familiar with the aforementioned standards as well as all applicable local codes and Horton Automatics recommendations for power operated pedestrian doors Maintenance and adjustments performed by this service representative technician will ensure safe and proper operation of the automatic door unit Service Availability Horton Automatics products are manufactured at the plant s facilities in Corpus Christi Texas and Telford England A worldwide network of authorized independent distributors offers both installation and service For the Horton Automatics distributor in your area call 1 800 531 3111 or consult the Yellow Pages of your local telephone directory under Door Operating Devices In Europe call the plant in Telford England at 011 44 1952 670169 Compliance with Safety Standards Your door system was designed to the latest operating and safety standards In addition to the above recommendations and to ensure the continued safe operation of your door it is important that proper decals and labels be applied and maintained on your doors see General Safety section of this owners manual If decals are removed or cannot be read request labels to be replaced when calling for service NOTE AAADM the American Association of Automatic Door Manufacturers has extablished a program to certify automatic door inspectors Through this progr
3. ELEL RRR m 3 8 x 3 Hilti Anchor Bolt Figure 6 Assembly 3 places Guide Rail Anchorage to Floor Woes Rail Foot Guide Rail Frame Extension embedded in cement type grout J oo ee 4 152d Operation Regardless of the type of electronic safety system used the basic test for safe operation remains the same the door should not open or close on you while in the swing path of the door Limited Warranty Horton Automatics Seller warrants to the Buyer all products they manufacture to be free from defects in material and workmanship under normal use and service for twelve months from the date product is placed in operation The Seller s obligation under this warranty is limited to the repair or replacement at the factory of any parts which shall be returned to the Seller with transportation charges prepaid and which after examination prove to be defective Said warranty shall not apply to such products which shall have been installed altered or repaired by any person not expressly authorized in writing for such purpose by the Seller or subjected to misuse negligence or accident The aforesaid warranty is made expressly in lieu of other warranties expressed or implied and in lieu of any other obligations or liabilities on the part of the Seller and the Seller neither assumes nor authorizes any person to assume for it any other liability or obligations in connection with the sale of such prod
4. H Horton AUTOMATICS A Member of AAADM American Association of Automatic Door Manufacturers AUTOMATIC SWINGING DOOR OWNER S MANUAL Distributed by Contents Section Caution To Our Customers Service Availability Compliance with Safety Standards What You Should Know Daily Safety Check 4 thru 5 General Safety 5 thru 7 Operation 8 Limited Warranty 8 A CAUTION Failure to follow instructions can result in an improperly adjusted door and can consequently cause injury and damage to equipment and property Inspect door operation daily using the Daily Safety Check of this Owner s Manual and at door Safety devices should be in place and operational Should the door fail to operate as prescribed in the Daily Safety Check of this Owner s Manual or if a potentially hazardous situation is suspected the door should be taken out of automatic service until a professional inspection is made and the problem is corrected DO NOT ATTEMPT TO REPAIR OR ADJUST THE DOOR YOURSELF Have door and all safety devices inspected at least annually by an AAADM certified inspector To Our Customers The purpose of this manual is to familiarize you with your automatic door system It is essential that you know your system and that you recognize the importance of maintaining your door system in compliance with the industry standards for safety as outlined in the ANSI A156 10 1999 American National Standard for Power
5. Perform these tests while traffic is restricted from all detection and sensing zones Motion Detector Actuation Presence Detection Safety iS ee a ye S S 2 i o l Activating 2 Area gS ZUS at et ae J 2 io T 3 cc ke D oO ae oe KH SWING DOOR PLAN WITH MOTION DETECTOR ACTIVATION AND PRESENCE DETECTION SAFETY Figure 1 2 3 he ye Activating 2 l Area i 4 i x 2 5 i 127mm Mat Trim l 5 lt J Ve 6 il Threshold Safety Mat Guide Rail SWING DOOR PLAN WITH MOTION DETECTOR ACTIVATION AND FLOOR MAT SAFETY Figure 2 1 Check electronic sensor by walking toward the door opening The door should start opening when you are about four feet from the door The door should swing smoothly and stop without impact Move slowly through the door 6 in per second The door should remain open See Figure 1 Step out of the sensor zone After a brief time delay at least 1 1 2 seconds the door should close to 10 from fully closed then noticeably slow down and take at least 1 1 2 seconds for the final closing Approach the safety side of the door first then have someone else approach the activating side of the door as long as you are in the safety area of the door it should not open Floor Mat Actuation Floor Mat Safety It is necessary to have a safety mat covering the entire swing area of the door Step on the activating mat Step
6. There should be no bulletin boards literature racks merchandise displays or other attractions in the door area that would interfere with use of the door Keep traffic path Clear 4 Traffic Patterns Observe traffic patterns Plan routing so people enter and exit ina straight approach directly onto the center of the door opening 5 Finger Guard Inspect finger guard to see that it is secure and in good repair 4 150d General Safety cont 6 Decals Safety decals play an important role in providing the user with safety signage as outlined in ANSI A156 10 Installer to adhere these decals to the door as instructed and illustrated in Figure 4 Call your local distributor to replace any damaged decals A One Way Traffic Visible from non approach side DO NOT ENTER in white letters on red background Visible from approach side Arrow Sign to have green circle surrounding black arrow on white background B Two Way Traffic Visible from both sides of the door with the words CAUTION AUTOMATIC DOOR The words Automatic Door must be in black lettering on yellow background and be at least 1 2 6mm tall NOTE Minimum diameter of circular decals should be 6 152mm C Manual Activation Switch Knowing Act Visible from both sides of the door with the words Automatic Door Activate Switch to Operate D AAADM safety information sticker Daily Safety Check should be affixed on the door frame in a prote
7. am the inspectors are trained to check the door systems for compliance with the appropriate version of the American National Standards Institute standard A156 10 2 7 097d1 What You Should Know Your local Horton Automatics distributor should provide you with the following for each door after installation 1 Instructions on how to conduct the Daily Safety Check by walk through example NOTE AAADM Daily Safety Check videos are available Contact your local distributor or AAADM Location of Automatic Off Hold Open Rocker Switch Locations and use of Circuit Breakers Discussion of problems that could result from door being allowed to operate after a malfunction is observed NOTE If there are any problems discontinue door operation immediately and secure in a safe manner Call your local distributor for repair AAADM compliance certificate signed by an AAADM certified automatic door inspector This M310 Owners Manual with the following items filled in Phone number to call regarding problems or request for service Date equipment shipped from Horton plant Date equipment placed in service Horton Automatics invoice number for Warranty reference and repairs Equipment type door series amp Accessories 3 7 098d1 48 1219mm Min 48 1219mm Min Daily Safety Check Perform these safety checks daily on each automatic swinging door to insure your customer s safety and your own protection
8. cted visible location A separate sticker confirming compliance and showing date of inspection should be affixed by certified AAADM inspector just below Daily Safety Check Figure 4 CAUTION CAUTION ENTER DOOR TWO WAY ACTIVATE SWITCH TRAFFIC TO OPERATE AUTOMATIC DOOR KEEP MOVING C1631 3 C1633 2 C1633 3 Two sided decal for one way traffic Two sided decal Required for two way traffic for knowing act applications C1690 2 Daily safety check decal should be placed on the door jamb in full view 4 151d General Safety cont 7 Guide Rails Check that guide rails or other barriers or separators are present ANSI 156 10 requires two guide rails on the swing side of power operated doors used by the general public A typical layout is shown Figure 5 Check guide rails sizes Figure 6 and make sure guide rails are firmly anchored Figure 7 Figure 5 ee Approach Side Door Door 9 s Pi Z Approach Oo Side Z Pa 6 152 Max m 2 51 Min gt tees 6 152 Max Swing Door Floor Plan Figure 6 Width of Door m 2 51 Max Width of Door OOOO SASS A PRAN ESS ES N x 7 4 LLT x 4 X sss 8390s ss Sete amp os 3RR 323o Sree Z lt LS SSL SLS x RRS gt LN LS aces z 30903230900 SS SSN N XOX ene a RRR L
9. itch 2 Reactivate door and crouch motionless in door opening AUTOMATIC DOOR for 10 seconds Door should not close Pushbutton Switch 1 Dia Red Pushbutton microswitch in 4 sq X 1 1 2 deep Junction Box assy mounted on door unit or wall CAUTION Regardless of the method of activation if you have a problem TO OPEN turn off the door operating N equipment and call your service representative Front View Side View Push Plate Wall Switch 6 1 4 Dia Stainless Steel Plate with microswitch assy in standard Junction Box General Safety 1 Breakout Stop In swing doors on center pivot can be supplied with a breakout stop that will allow the door to open to 90 degrees in the opposite direction of normal traffic Call your supplier for details When the door is pushed into the breakout mode the power to the operator is removed except spring closer force 2 Lock Stile With door open grasp lock stile of door and attempt to move vertically and horizontally There should be no looseness in the door pivots or in connections between door and operator Check periodically 3 Housekeeping Inspect door s overall appearance A Check the threshold area so that it is clean and clear of loose debris or anything else that could create a tripping or slipping hazard B Check all door panels rails hardware decals glass for damage C Make sure that all covers are properly secured D
10. ucts to the Buyer There is no warranty of merchantability or fitness for any particular purpose nor is there any warranty expressed or implied except as specifically stated above seller shall not be liable for special or consequential damage nor for claims of any third party against the buyer Generally the installing distributor provides a one year warranty covering the labor and transportation charges for defective parts replacement If this is the customer s wish it should be specified 4242 Baldwin Boulevard Horton Automatics Ltd Corpus Christi Texas 78405 3399 Unit A Hortonwood 31 Tel 361 888 5591 Telford Shropshire Fax 361 888 6510 England TFI 7YZ Toll Free in North America Tel 01952 670169 Tel 1 800 531 3111 Fax 01952 670181 Fax 1 800 531 3108 International Numbers Tel 4 44 1952 670169 AUTOM ATI CE S _Internet http www hortondoors com Fax 44 1952 670181 M310 Oct 2000 4 089d1
Download Pdf Manuals
Related Search