Qedit 5.6 for HP e3000 Change Notice
Contents
1. Stdemd Sys group You need to know the Manager Sys password stream savecmdf qeditjob robelle wait for it to finish listf stdcmd sys Then stream Qcompxl Qeditjob to make three 3 changes to the Pub Sys compiler command files stream qcompxl qeditjob robelle This job makes the following changes to the compiler command files 1 Change the run of the compiler program to xl qcompxl pubnew robelle qcompxl pub robelle 2 Add shr to the File commands for the text and master files 3 Change setjcw jcw fatal to an invalid command so that errors in either Qedit or MPE 1X will abort the command file Compiling Instructions Now you should be able to compile a Qedit file or a Keep file either within Qedit or at the MPE iX prompt simply by invoking the normal command file pasxl source from MPE run qedit pub robelle pasxl source from Qedit Within Qedit you can specify an asterisk for the current workfile run qedit pub robelle text source pasxl exit pasxl geditscr Step 4 Install CM Compiler Interface optional If you don t need to compile source files that are saved as permanent Qedit workfiles file code 111 then this step is optional When installing Qedit on MPE iX you might have to install the NM compiler interface described earlier and the CM compiler interface described here For MPEV however you only have to worry about the original CM compilers Qedit 5 6 for H2. You may have received printed copies of these They are also available as PDF or HTML Help files You may have received a documentation CD with these files or you can download the files from the Robelle web site User Manual The user manual contains the full description of all the Qedit commands as well as usage tips The manual is up to date with all the latest changes incorporated in Qedit To see only the changes in the latest version see the What s New section of the manual or see the change notice Change Notice For a complete description of the latest changes made to Qedit the installation instructions and any compatibility issues see the change notice that was included with the release Printed Documentation The latest user manual and change notice are available in Adobe PDF format If you do not already have the Adobe Acrobat Reader you can get a copy from http www adobe com prodindex acrobat readstep html Online Documentation in HTML Help Format The Qedit user manual and change notice are available in HTML Help format Support for compiled HTML help CHM files is built into recent versions of Windows CD or Web Download If you received a documentation CD with this version of Qedit you will find the documentation files on the CD The installation program will start automatically when you insert the CD into the drive If it does not start automatically run D setup exe where D is the letter assigned t
3. P e3000 Change Notice Installation e 9 10 e Installation After restoring the files from tape you have to choose an installation method integral or isolated Choosing a CM Installation Method There are two methods of fixing the compilers on your system integral into Pub Sys or isolated in the Robelle account The isolated method is best for new or trial period users because it is faster to install and easier to remove later You can start with the isolated method and easily convert to the integral method later To determine if you currently use the isolated or integral method run Qedit and enter verify whichcomp If the displayed line ends with IN ROBELLE you are using the isolated method If it ends in IN SYS you are using the integral method Integral Method The compilers in Pub Sys are fixed directly and a segment is added to the system SL The standard Cobol and Pascal commands of MPE then compile Qedit workfiles Sysdump is used to make a new cold load tape for the next time you need to boot the system Isolated Method The MPE compilers are copied into the Q Robelle group and the original compilers are left in the Pub Sys group No code is added to the system SL Qedit workfiles can be compiled only within Qedit because the Qedit compilers are not in Pub Sys Integrating CM Compiler Changes The job stream Qeditj1 Qeditjob Robelle makes integral compiler fixes Use it either to update the fixes to a new ve
4. Qedit 5 6 for HP e3000 Change Notice by Robelle Solutions Technology Inc Program and manual copyright 1977 2005 Robelle Solutions Technology Inc Permission is granted to reprint this document but not for profit provided that copyright notice is given Updated Thursday December 08 2005 Qedit and Suprtool are trademarks of Robelle Solutions Technology Inc Windows is a trademark of Microsoft Corporation Other product and company names mentioned herein may be the trademarks of their respective owners JA robelle solutions technology Robelle Solutions Technology Inc 7360 137 Street Suite 372 Surrey B C Canada V3W 1A3 Phone 604 501 2001 Fax 604 501 2003 E mail sales robelle com E mail support robelle com Web www robelle com Contents Introducing Qedit 5 6 1 Introduction sav cn ean eeR a PAs KORN wR ee A RAR Hann ern ee 1 Qe dit for Wand OWS 455665 50scnSek 65a Reese Seo a Save SSE A ae oe Gah Suen SRE GO bv eon esa EN 1 Highlights In Version 5 5 12 0 nan wad wits Ac a ea wnnndan Aue eaten seein wees 1 Highlights In Version 5 5 BTT 1 Highlights In Version 5 5 10 ccsccsscessessseeseessceeseeeceseceseceaecaecaaecaeecaeeeaeeeeeseeeseeeneeneensenereneaes 2 Compatibility a E EEEE sess TE T ETA a TRT HR REE TTT 2 Unresolved Externals on MPE 1X 4 0 2 CPU Serial Number HPSUSAN eee 3 Compatibility Mode vs Native Mode sese 3 KO Wi T eT 3 Underscore in INFO String sese eee ee eee 3 Nest
5. Windows Introduction Server Process Qedit for Windows lets you edit local MPE iX and HP UX files from a single MS Windows program It consists of a Windows editing client and either an MPE iX or HP UX editing server that work together to edit your host files To take advantage of Qedit for Windows you need both parts the client and the server Qedit for Windows uses the popular TCP IP protocol for communicating between the client and the server this is the same protocol that you use to access the Web Configuring the Qedit server software requires creating the correct TCP IP environment for Qedit for Windows By default the Qedit server uses the MPE iX Remote Process Management RPM service to start each server session With RPM the client sends a program name and an Info string along with logon information to the RPM listening process The RPM listening process then validates the user logon and starts the specified program with the Info string The server process is seen as an MPE 1X session but the process is not included in your user limit The Qedit server software is not available for MPEV Logon Sequence When you use an MPE 1X connection to open a file in Qedit for Windows this is what happens 1 A new host session is started and the user name and passwords are validated this includes additional logon processing by products such as SECURITY 3000 2 The Qedit client asks RPM on the host to run the Ci Pub Sys progra
6. ation Files step 2 Then do the Suprtool installation starting with the stream Install Suprjob step Skip the initial Restore and Robelle Accoount steps and skip the Olib Bonus step Do the final Purge Installation Files step Step 1 Install Qedit 6 e Installation This step requires three separate procedures restoring all Robelle files from tape to disc building or upgrading the Robelle account with the job stream that we provide and streaming the installation job stream All these procedures can easily be accomplished if you log on as Manager Sys Restore All Robelle Files First you have to restore all the files from tape Qedit 5 6 for HP e3000 Change Notice shello manager sys log on as system manager file rtape dev tape mount Robelle tape restore rtape robelle create reply on the console Check the Restore listing for files that were busy and could not be restored There are a number of reasons why a file could have been busy someone may have been using it or backing it up it may have been held as a suspended son process menu system or it may have been allocated If files were busy chase away any users deallocate any busy programs then try the Restore command again Create Update Robelle Account You must build or upgrade the Robelle account with the job stream that we provide This job removes the passwords from the Robelle account and from the user Mer Robelle You need to know the e
7. coming connection requests on a specific port number Like the HP UX server the default port number is 7395 If you want to use a different port you have to modify the Qserver job stream Upon receiving a request the listener passes the information down to RPM which then takes over QEDSERVMODE JCW The Qedit server process always executes the commands in the system wide Qeditmegr files e g Qeditmgr Pub Sys Processing of the account and group Qeditmegr files can be enabled in the client To indicate that you are using the Qedit server in either the server or the nonserver mode which are not exactly the same we provide a JCW called QEDSERVMODE QEDSERVMODE is set to zero 0 if you are in nonserver mode and nonzero if you are in server mode If you are using the Qedit server you should modify your Qeditmegr file so that few if any commands are executed in server mode For example if Qedservmode 0 then set extprog mpex pub vesoft endif Qedit 5 6 for HP e3000 Change Notice Bugs Fixed Since Version 5 5 Introduction This release fixes a number of bugs The number in brackets at the end of each section indicates the version in which the problem has been fixed Qedit 5 6 for HP e3000 Change Notice The server correctly recovers line numbers on an Undo operation 5 5 12 The fix made in Qedit 5 5 10 to allow Posix filenames allowed in I O redirection operations caused the Change command to be parsed incorrectly in so
8. creen mode automatically However since the underscore is seen as a string delimiter whatever follows is basically ignored during command processing Thus the file is opened but Qedit stays at the line mode prompt We hope to have a permanent fix in a future release In the meantime the workaround is to explicitly identify the underscore as being part of the filename You can do this in different ways Here are two examples run gedit pub robelle info c t file my_history vi The file keyword and the backslash characters are used to clearly identify the filename The other approach is remove the underscore from the list of valid delimiters using the Set StringDelimiters command run gedit pub robelle info set stringd posix c t my history vi The file approach is simpler as it only affects that particular command The Set StringDelimiter approach should be used with caution as it might affect other commands during the edit session Nested Command Files Starting with Qedit 5 4 11 complex command files with multiple levels of nesting can cause an abort In some of the cases we have seen the problem only occurred when the Defer option was used The workaround is simply to disable the feature Qedit 5 6 for HP e3000 Change Notice Introducing Qedit 5 6 lt 3 with Set Open Defer Off We are investigating the problem and will fix it as soon as possible Documentation Qedit comes with a User Manual and a Change Notice
9. ed Command Files sese 3 IRIS eT TTT 4 Wiser Manuals 2 4 estore te ts Ha Taa cpetere sh lita ct testes tine O a MOA a 4 Change N OLTE E E E E ook atenegsopabeusce E TE 4 Printed Rac T Te 4 Online Documentation in HTML Help Formats sese ee ee eee ee 4 CDoor Web Download sienpre eas i iie i 4 Installation 5 Uperade Instructions si E E enc gh dlag Shiacebecdansde dA 5 Installation Assistance A E E E E E 5 Important Note About Passwords sss sese eee 5 STREAMX Useisiin o ionen aitat e e t e a E En A aE ws 6 Combined Qedit Suprtool Tapes sss esse 6 Step 1s Install a 5 T 6 Restore All Robelle Files vases groge ige doce cccetiavedesckcdecvecducecesiaddicusiesebcvsdeddeeseceseedeves 6 Create Update Robelle Account sss eee ee eee 7 Pile LT 7 Install Program T 7 Step 2 Install QLIB and Bonus Programs sss sese 8 Building the Spell Dictionary sss cc ceecceeccescceseceseceseceecseeeseeeeeeneceeeseeneeneesaeenseenaes 8 Step 3 Install NM Compiler Interface only XL 9 Installing the Interface eac raesc sse seca gas nee i ii i 9 Compiling struct Ons soc 2R ete hates Rises Bes ee Reed eee 9 Step 4 Install CM Compiler Interface optional sss 9 Choosing a CM Installation Method sss 10 Integrating CM Compiler Changes sss eee eee 10 Isolating CM Compiler Changes sss sese eree 10 Step 5 Purge Installation Files optional sss 11 Enhancements Since Version 5 5 13 Qedit 5 6 for HP e3000 Change Notice Contents e i ii e Contents I
10. he C library If you are not planning to upgrade to a more recent version of MPE iX you should contact Robelle technical support We can provide you with an additional file that will fix these problems Qedit 5 6 for HP e3000 Change Notice CPU Serial Number HPSUSAN Qedit runs only on CPUs whose serial numbers the showvar hpsusan number on MPE iX have been encoded If it fails to run and you see an invalid HPSUSAN error message call Robelle for assistance Compatibility Mode vs Native Mode Throughout this change notice and in all the Qedit documentation there are references to compatibility mode and native mode If you are on a Classic HP e3000 that is not on MPE iX you can use the compatibility mode version of Qedit Our installation jobs will automatically install the correct version of Qedit for your machine Qedit works on both MPE iX and MPE XL Any reference to MPE iX in our documentation can also be considered a reference to MPE XL and vice versa Known Problems Underscore in INFO String The underscore character can be used as a string delimiter and as as valid character in a Posix filename If you enter a filename containing an underscore in the INFO string parameter Qedit interprets the underscore as a string delimiter For example if you enter wt run qgedit pub robelle info c t my history vi This command should start up Qedit have it open the Posix file called my_history and go into full s
11. ionary Before you can use the Spell Bonus program or the Words command in Qedit you have to build the main dictionary for Spell with an additional installation job This job stream can take 30 to 60 minutes you do not have to wait for it to finish before going to the next step By default the Spell program uses American spellings To use British spellings set the SpellAmerican JCW to False in the installation job run qedit pub robelle or use Editor text dictmain spjob modify setjcw SpellAmerican for British spelling keep robtemp change True to False exit stream robtemp spurge robtemp For more information see the Spell User Manual 8 o Installation Qedit 5 6 for HP e3000 Change Notice Step 3 Install NM Compiler Interface only XL If you don t need to compile source files that are saved as permanent Qedit workfiles file code 111 then this step is optional It is also optional if you have not installed anew version of MPE since your previous Qedit installation If you use any NM compilers on MPE iX you will want to install the new NM compiler interface If you still use the CM compilers as well you will also want to install that compiler interface described in step 4 below Installing the Interface Assuming that you have restored the Robelle files on your system and that you have not done this step before stream Savecmdf Qeditjob to make backup copies of the existing HP command files in the
12. m with an Info string For example gedit pub robelle d lt ip address gt The lt ip address gt is the IP address of the Qedit client 3 The Qedit process starts and it verifies that you are authorized to use Qedit in server mode Qedit 5 6 for HP e3000 Change Notice Qedit for Windows e 15 16 s Qedit for Windows 4 Any system wide Qeditmgr files are always processed Processing of account and group Qeditmegr files is optional and must be enabled in the client 5 The requested file is opened 6 A response is sent to the client It is important to note that logon UDCs are not executed as part of this process Any environment variables or file equations that are set up as part of a logon UDC will not be applied in the Qedit server process Firewall Protocol and the Server The default protocol is usually sufficient at most sites However some customers use firewall devices to further restrict access to their HP e3000 The default protocol might not work at some of these sites For this reason the server offers a Firewall protocol In order to use this protocol a Qedit listener has to be running at all times You should add this job to your system startup procedure stream qserver qeditjob robelle If the job is not running all new connection requests are rejected Currently the only way to stop the job is to abort it With this setup the server runs as a listener similar to a UNIX daemon It waits for in
13. me cases This change has been backed out until a more suitable fix can be found 5 5 11 If the first line of a block was partially copied cut did not start with column 1 the server pasted unwanted characters at the end of that first line These unwanted characters were not displayed until the file was closed and re opened or after a cache refresh 5 5 11 Posix filenames are now allowed in I O redirection operations when running other programs from within Qedit 5 5 10 The server may lose a file after detecting a problem such as running out of disc space on a Save Even subsequent saves would not write the file back properly The file could be saved only by doing a Save As 5 5 10 Bugs Fixed Since Version 5 5 e 17
14. mn support with the HP terminal emulator called KEA 700 98 for Windows 95 98 NT version 5 10x from Attachmate Highlights In Version 5 5 10 Compatibility 2 e Introducing Qedit 5 6 This is an overview of all the changes implemented in this version e Posix filenames are now allowed in I O redirection operations when running other programs from within Qedit e The server may lose a file after detecting a problem such as running out of disc space on a Save Even subsequent saves would not write the file back properly The file could be saved only by doing a Save As Qedit commands are added to the Redo stack before variable substitution occurs Set Varsub On i e with the variable name So if the variable value changes between the time the command is entered and the time it is retrieved from the stack the results may be different It s also important to note that commands related to Redo stack operations such as Listredo Do Before can not have trailing comments enclosed in curly braces anymore The comments are not removed and likely cause a syntax error Unresolved Externals on MPE iX 4 0 If you try to run Qedit on MPE iX 4 0 you might get the following errors UNRESOLVED EXTERNALS _thd_errno LDRERR 512 UNRESOLVED EXTERNALS _thread_set_error LDRERR 512 UNRESOLVED EXTERNALS thd_lock_ lang mutex LDRERR 512 UNRESOLVED EXTERNALS thd_unlock lang mutex LDRERR 512 These messages indicate some routines missing from t
15. ntroduction kean aie keen Ree eee Bhi Re A ete Re BAe RARE 13 Qedit for Windows 15 Fees e 1 EEEIEE EE eset een ctti ve Seto Auta S OTENE E E E ATTENTE 15 SELVERPLOCESS T aa T a a a AE aT 15 atere aieea E aO E EEEE TOE E EN RAE EAE 15 Firewall Protocol and the Server sse 16 QEDSER VMODE O E a a a wees heeled heiess 16 Bugs Fixed Since Version 5 5 17 TNtrOdUctiOn a c3 xe Stee ee seit SOUR ent Meee i eet eee ees 17 Qedit 5 6 for HP e3000 Change Notice Introducing Qedit 5 6 Introduction Qedit is our fast and efficient full screen editor and development home base for HP e3000 systems MPE iX and MPE V One of our objectives for Qedit is to give PowerHouse and COBOL developers all the necessary capabilities to perform their work from a single program We are constantly enhancing Qedit with new features and fixes requested by users Not only does this change notice include a description of Qedit s enhancements it includes detailed installation steps and a list of other changes for host based Qedit This change notice also includes a description of the server portion of Qedit for Windows Host based Qedit is also available for HP UX with virtually identical features If you would like more information please contact Robelle Solutions Technology Inc Qedit for Windows Our newest editor Qedit for Windows now gives you the familiar Windows interface for editing both MPE iX and HP UX files all from a single program Qedit for Window
16. o your CD ROM drive If you do not have a documentation CD you can download the files from the Robelle web site at http www robelle com library manuals 4 e Introducing Qedit 5 6 Qedit 5 6 for HP e3000 Change Notice Installation Upgrade Instructions If you are a new Qedit user please follow the installation instructions in the Qedit User Manual The following installation instructions assume that you are an existing Qedit user who is upgrading to version 5 6 To install this upgrade of Qedit follow these steps 1 Install Qedit 2 Install the QLIB and or Bonus programs 3 Fix the NM compilers only XL 4 Fix the MPEV compilers optional 5 Purge installation files optional Installation should take less than 20 minutes No one can use Qedit while step 1 is in progress Bonus and QLIB programs cannot be used while step 2 is in progress Installation Assistance If you have any questions about the upgrade process or run into any problems please call us Technical support is available on weekdays from 7 a m to 4 p m Pacific time Important Note About Passwords None of the jobs we supply have passwords in them Before streaming a job you might have to add your system s passwords to the first line Users of MPE XL version 3 0 and later do not have to do this because the operating system prompts you for missing passwords The same is true for MPEV users who have security software that inserts passwords Most MPEV
17. rsion or to re install the fixes after an MPE update from HP Before you start you should Store Pub Sys and save it on tape because this job modifies the compiler program files in Pub Sys You will need another small tape for a new cold load tape Ensure that no one compiles during the installation Stop all jobs and send an operator warning Log on as Manager Sys modify the first line of the Qeditj1 job to include the passwords then Stream the job stream gedit jl qeditjob robelle This job runs Qedify Pub Robelle which updates the compilers in Pub Sys and installs nonprivileged hooks into them so that the compilers can access Qedit workfiles The job adds a code segment from Qcompusl Pub Robelle into S1 Pub Sys and then requests a tape mount for a new cold load tape Mount a write enabled tape and Reply Save this tape and use it for future cold loads The CM compiler interface is now installed Compiling done inside or outside Qedit will work on either Qedit workfiles or on regular Keep files Isolating CM Compiler Changes The job stream Qeditj1a Qeditjob Robelle fixes the compilers but it isolates the changes in the Q Robelle group Ensure that no one compiles during the installation Qedit 5 6 for HP e3000 Change Notice Stop all jobs and send an operator warning Modify the first line of Qeditj la to include the Robelle password then stream the job stream gqeditjla qeditjob robelle The job uses Qedify Pub Robelle
18. s is the next generation of our popular editor which consists of a Windows editing client and either an MPE iX or HP UX editing server that work together to edit host files Since its release we have focused our development efforts on Qedit for Windows adding more functionality and continuing to expand its capabilities If you would like to upgrade to Qedit for Windows please contact Robelle Solutions Technology Inc Highlights In Version 5 5 12 This is an overview of all the changes implemented in this version e The server correctly recovers line numbers on an Undo operation Highlights In Version 5 5 11 This is an overview of all the changes implemented in this version Qedit 5 6 for HP e3000 Change Notice Introducing Qedit 5 6 s 1 e The fix made in Qedit 5 5 10 to allow Posix filenames allowed in I O redirection operations caused the Change command to be parsed incorrectly in some cases This change has been backed out until a more suitable fix can be found e Ifthe first line of a block was partially copied cut did not start with column 1 the server pasted unwanted characters at the end of that first line These unwanted characters were not displayed until the file was closed and re opened or after a cache refresh e Verify Keep does not display the file timestamp and the TrailingSpaces setting anymore The information can be displayed using Verify Info or Verify All e Set Vis Attachmate was added to allow for wide colu
19. tallation job stdlist If anyone was using Qedit or attempting to back it up during the installation the job will fail If the job failed chase away any users ensure that a backup is not in progress then stream the installation job again The installation job renames your current versions of Qedit to the PubOld group of the Robelle account If you need to move these versions back into production use the Previous Qeditjob job stream Once you have installed Qedit users can now access it by entering run Qedit pub robelle Step 2 Install QLIB and Bonus Programs Qedit comes with an array of contributed software in the QLIB library in the QLIB groups of the Robelle account QLIB programs may be used on any CPU and may be given away freely Your Robelle license may also entitle you to receive our Bonus programs Compare iX HowMessy Select Spell and Xpedit These programs reside in the Pub group of the Robelle account Bonus programs can be used only on authorized machines and you may not distribute them to anyone If you received Bonus programs with this version of Qedit use the job stream called Bonus Job Robelle to install both the QLIB and Bonus programs If you did not receive Bonus programs use the job stream Qlib Job Robelle to install the QLIB programs shello mgr robelle stream bonus job robelle or Qlib Job Robelle If you skip this step you may end up running old versions of these programs Building the Spell Dict
20. to copy the compilers from Pub Sys to the Q Robelle group then it fixes them so that they can read Qedit files The original compilers in the Pub Sys group are not modified Once this step is finished you can use the CM compilers on Qedit files from within Qedit but not at the MPE prompt Step 5 Purge Installation Files optional The easiest way to clean up after an installation is to stream the Cleanup Purgejob Robelle job This job saves you disc space by purging the installation files It does not purge the files that are necessary to run the software stream cleanup purgejob robelle Qedit 5 6 for HP e3000 Change Notice Installation e 11 Enhancements Since Version 5 5 Introduction With every release we provide Qedit users with new features Major enhancements since the last major release include e Verify Keep does not display the file timestamp and the TrailingSpaces setting anymore The information can be displayed using Verify Info or Verify All 5 5 11 e Set Vis Attachmate was added to allow for wide column support with the HP terminal emulator called KEA 700 98 for Windows 95 98 NT version 5 10x from Attachmate 5 5 11 The following sections describe the new enhancements to Qedit since the last major release The number in brackets at the end of each section indicates the version in which the feature was first introduced Qedit 5 6 for HP e3000 Change Notice Enhancements Since Version 5 5 lt 13 Qedit for
21. users have to edit the jobs For example if the system manager logon password is Qwerty you would do the following Qedit 5 6 for HP e3000 Change Notice Installation e 5 editor HP32201A 07 22 EDIT 3000 text robelle job robelle FILE UNNUMBERED modify 1 MODIFY 1 job robelle manager sys pub hipri i qwerty job robelle manager sys qwerty pub hipri keep robtemp exit END OF SUBSYSTEM stream robtemp spurge robtemp STREAMX Users Users of STREAMX a part of SECURIT Y 3000 from VESOFT Inc must set a Job Control Word before streaming jobs This step prevents STREAMX from generating an error if the Robelle account does not yet exist For example setjcw streamxtempnonest 1 stream robelle job robelle Combined Qedit Suprtool Tapes If the tape you received has more than one product on it e g Qedit and Suprtool you can take a shortcut instead of following the complete instructions for both products Steps that are common to both installations need only be done once That is there is no need to restore twice or setup the Robelle account twice or install the Qlib and Bonus programs twice or clean up unneeded files twice Note that if you do not use this shortcut it is not a problem it will just take you a few minutes longer and you will have to mount the restore tape a second time Say you install Qedit first followed by Suprtool 1 Do all of the Qedit steps except for the final Purge Install
22. xisting passwords so that you can put them back after the installation listacct robelle pass look for PASSWORD listuser mgr robelle pass look for PASSWORD Once you have written down the passwords stay logged on as Manager Sys and stream the job that builds and updates the Robelle account stream robelle job robelle This job stream will send you a message when it is finished Stay logged on as Manager Sys and put a password on the Robelle account If you are upgrading your Robelle account use the old password saltacct robelle pass hardpass hard to guess Please note that during installation we add OP capability to the Robelle account Once Qedit has been installed you can remove OP capability File Names The following Qedit program files are restored to the Pub group of the Robelle account Program Purpose qeditnm NM Qedit program qeditcm qeditpm CM Qedit programs qcompxl NM compiler interface qedify qcompusl CM compiler interface qloadxl NM Qedit options ederrnm ederrem Editerror support qmap reformat MPEV PMAP Install Program Files Our installation job puts the proper Qedit files into the Pub group of the Robelle account To make sure no one uses these programs during the installation send a warning Then stream the job Qedit 5 6 for HP e3000 Change Notice Installation e 7 shello mgr robelle warn please exit from Qedit NOW stream install qeditjob supply passwords Check the ins
Download Pdf Manuals
Related Search