QSSP-PCIE-100
Contents
1. XP Server 20003 Vista Installation From the Device Manager window double click Ports COM amp Jan 07 6 MN2000000066 LPT then double click the MosChip PCI Serial Port you want to change Click Settings tab and click Advanced Click the down arrow that is next to the COM Port Number box select a COM port that is not in use then click OK Click OK then close Device Manager to save the changes Follow steps 1 4 again to change the other three serial port if needed Change Parallel Port Number Some parallel devices need a specific parallel port in order to work If your parallel device works properly do not change this setting For Windows 2000 XP Server 20003 Vista Installation From the Device Manager window double click Ports COM amp LPT then double click the MosChip PCI Parallel Port Click Port Settings tab At the LPT Port Number box click the down arrow and select an LPT port that is not in use Click OK then close Device Manager to save the changes Jan 07 7 MN20000000662. 03 then click OK Change D to match your CD ROM drive letter If the Hardware Installation window pops up click Continue Anyway then Finish Our driver has been thoroughly tested for stability and compatibility Repeat steps 1 3 five more times Restart Windows to complete the installation For Windows Vista l Jan 07 At the Found New Hardware Wizard select Locate and install driver software recommended Click on I don t have the disc Show me other options Select the option Browse my computer for driver software advanced 5 MN2000000066 Insert the driver CD check Include subfolders type in D Drivers PCIExpress QSSP PCIE 100 Vista32 then click Next Change D to match your CD ROM drive letter If the system prompts the user informing the drivers are not signed select the option Install this driver software anyway Click on Close to complete the driver installation To Verify Windows Driver Installation 1 Right click My Computer then click Manage Click Device Manager 2 Click on the plus sign in front of Ports COM amp LPT four MosChip PCI Serial Port and one MosChip PCI Parallel Port should be displayed 3 Double click Multifunction adapters MosChip PCI Multi l O Controller should be displayed Change COM Port Number Some serial devices need a specific COM port in order to work If your serial device works properly do not change this setting l For Windows 2000
3. QSSP PCIE 100 User Manual Ver 1 00 All brand names and trademarks are properties of their respective owners Jan 07 1 MN2000000066 Features and Benefits Features Compliant with PCI Express Base Specification Bus 1 0a Supports Standard Parallel Port SPP Enhanced Parallel Port EPP amp Enhanced Capability Port ECP Parallel data transfer rate up to 1 5 MB Sec Supports 4 x 16550 Fast UART serial port Serial data transfer rate up to 115200bps PCI Express X1 Connectors 4 x DB9 male serial connectors 1 x DB25 female parallel connector Package Contents Jan 07 1 x QSSP PCIE 100 Card 1 x Bracket with two DB9 male serial ports 1 x Bracket with one DB25 female parallel port 1 x Driver CD 2 MN2000000066 System Requirements Windows 2000 XP Server 2003 Vista PCI Express enabled system with an available PCI Express slot Hardware Installation 1 Turn Off the power to your computer 2 Unplug the power cord and remove your computer s cover 3 Remove the slot bracket from an available PCIe slot 4 To install the card carefully align the card s bus connector with the selected PCIe slot on the motherboard Push the board down firmly 5 Connect the system power source to the board s power connector 6 Replace the slot bracket s holding screw to secure the card 7 Replace the computer cover and reconnect the power cord Driver Installation Please make sure the board is
4. installed before proceeding with driver installation For Windows 2000 1 At the Found New Hardware Wizard click Next Jan 07 3 MN2000000066 2 Select Search for a suitable driver for my device recommended and click Next 3 Check Specify a location uncheck the other boxes then click Next 4 Insert the Driver CD type in the following path D Drivers PCIExpress QSSP PCIE 100 2000 then click OK Change D to match your CD ROM driver letter Click Next and Finish 6 Restart Windows to complete the installation For Windows XP 1 At the Found New Hardware Wizard select Install from a list or specific location Advanced then click Next 2 Insert the Driver CD check Include this location in the search uncheck the other box type in the following path D Drivers PCIExpress QSSP PCIE 100 XP then click OK Change D to match your CD ROM drive letter 3 If the Hardware Installation window pops up click Continue Anyway then Finish Our driver has been thoroughly tested for stability and compatibility 4 Repeat steps 1 3 five more times Jan 07 4 MN2000000066 5 Restart Windows to complete the installation For Windows Server 2003 1 At the Found New Hardware Wizard select Install from a list or specific location Advanced then click Next Insert the Driver CD check Include this location in the search uncheck the other box type in the following path D Drivers PCIExpress QSSP PCIE 100 20
Download Pdf Manuals
Related Search