Home

Manual

1. Converter AUTO FORCE selectable Bit 1 2 3 of S1 TP Port a AUTO 10 100 NWay Auto negotiation 10 100TP b FORCE 100 or 10 FDX or HDX Converter 100Mbps duplex selectable Bit 5 of 51 Fiber Port a FDX for 100FDX fiber link partner default 100FX b HDX for 100HDX fiber link partner LFP TP AUTO 100 FDX EN FDX FX PoE S1 mI 5 6 TP FORCE 10 HDX LFP HDX FX PoE DIS DIS Fig 12 Reset button and S1 Bit 1 2 3 4 5 6 Configuration and Setting Reset Once 51 1 51 2 51 3 51 4 S1 5 is changed please press this button to have the setting taken effect 51 1 TP port mode AUTO default or FORCE 51 2 TP port speed 100 10 when TP at Force 51 3 TP port duplex FDX or HDX when TP at Force S1 4 LFP enabled default or disabled 51 5 Fiber port duplex 100FDX default or 1000HDX 51 6 PoE ON OFF Enable default or disable Note 1 51 2 and 51 3 will take effect only when 51 1 is set at TP FORCE 2 S1 5 must be set to 100FDX for Single Fiber Model 3 51 6 must be set to POE ON while power supplies to PD Warning When TP Nway port is connected to TP 100FDX force mode instead of Nway partner it will result in 100HDX mode with invalid collision signal Ensure that all network nodes are configured at an identical operation mode Improper operation and flow control mode between TP and Fiber port connections will render the LA
2. 10 100Base TX to 100Base FX PoE PSE FE Media Converter 10 100Base TX to 100Base FX PoE PSE FE Media Converter User s Manual Release 1 0 The information in this document is subject to change without notice Unless the explicit written permission of Manufactory Corporation this document in whole or in part shall not be replicated or modified or amended or transmitted in any from or by any means manual electric electronic electromagnetic mechanical optical or otherwise for any purpose DURATION OF HARDWARE WARRANTY HARDWARE In accordance with the provisions described under Manufactory Corporation hereinafter called Manufactory warrants its hardware products hereinafter referred to as Product specified herein to be for a period of twelve 12 months from the date of shipment Should a Product fail to perform during the effective warranty period as described above Manufactory shall replace the defective Product or part or delivering a functionally equivalent Product or part in receipt of customer s request provided that the customer complies with the return material authorization RMA procedures and returns all defective Product prior to installation of the replacements to Manufactory All defective Products must be returned to Manufactory with issuance of a Return Material Authorization number RMA number assigned to the reseller from whom the end customer originally purchased the Product The reseller is responsibl
3. 10 100 10 100 Remote Switch B Switch Station C O O Fiber e Cable TP Fig 10 The status as TP Cable A is broken 10 100 10 100 Remote Switch Switch Station mmm I jJ Q OQ Fiber XC O Cable Fig 11 The status as Fiber Cable B or C is broken Note indicates LNK ACT LED Lit O indicates LNK ACT LED Off Warning The LFP Link Fault Pass Through function works only when both two converters own this capability in pairs Furthermore both LFP converters should be supplied only by the same manufacturer vender The connection coming from LFP converters with odd models or non LFP converters will cease the LFP function 7 LED Description LED Color Function Lit when fiber connection is good PEENE AST A Blinks when fiber data is present Lit when full duplex mode is active Amber Off when half duplex is active Blinks when collision is present Lit when TP connection is good Blinks when TP data is present Lit when TP speed is 100Mbps FX FDX COL TPLNK ACT Green TEM en Off when TP speed is 1OMbps PWR Green Lit when 5V power is coming up Green Lit when PoE feeding power is active PoE PSE TP Red Lit when PoE feeding power is disrupted In case of overtemperature overcurrent 4W Green Light when PD Class Type is Class 1 7W Green Light when PD Class Type is Class 2 15 4W Green Light when PD Class Type is Class 0 or 3 8 Connecting to TP Fiber Device
4. 1 Overview TEEE802 3u 100Mbps Fast Ethernet supports two types of media 10 100Base TX and 100Base FX for network connection LFP Link Fault Pass Through feature enhances the TP Fiber Link integrity and conformity Either one of TP or Fiber port is in link fail state the LFP converter forces the other port to be at link disabled state The PSE media converter complies with IEEE 802 3af its advanced auto sensing algorithm enables providing power devices PD discovery classification current limit and other necessary functions It also supports high safety with short circuit protection and power out auto detection to PD 2 Model Description Model Power Description PoE PSE TP Fiber AC Line 100 240V 50 60Hz The 100Mbps Fiber Transceiver Wavelength ST SC LC multi mode 2Km 1310nm SC LC S05 S20 S40 S60Km 1310 single mode SC LC S80 S 100Km single mode 1550nm Any other fiber model such as MT RJ is available upon request Single Fiber Model RX Wavelength 1310nm Single Mode 20Km TX Transmit 1310nm 40 60Km models are option RX Receive 1550nm 1550nm Single Mode 20Km TX Transmit 1550nm 40 60Km models are option RX Receive 1310nm Note The 1310nm and 1550nm models must be installed in pairs 1 install 1310nm model at one end and 1550nm model at the other one 3 Checklist Before you start installing the Converter verify that th
5. HE SOFTWARE If you do not accept these provisions and conditions please immediately return the unused software manual and the related product Written approval is NOT a prerequisite to the validity or enforceability of this Agreement and no solicitation of any such written approval by or on behalf of Manufactory shall be deemed as an inference to the contrary LICENSE GRANT The end user hereinafter referred to as Licensee of the Software is granted a personal non sublicensable nonexclusive nontransferable license by Manufactory Corporation Manufactory 1 To use the Manufactory s software Software in object code form solely on a single central processing unit owned or leased by Licensee or otherwise embedded in the equipment offered by Manufactory 2 To copy the Software only for backup purposes in support of authorized use of the Software 3 To use and copy the documentation related to the Software solely in support of authorized use of the Software by Licensee The License applies to the Software only except other Manufactory s software or hardware products Without the prior written consent of Manufactory Licensee has no right to receive any source code or design documentation with respect to the Software RESTRICTIONS ON USE RESERVATION OF RIGHTS The Software and related documentation are protected under copyright laws Manufactory and or its licensors retain all title and ownership in both the Software and its related
6. N to work poorly 9 Cable Connection Parameter 100Base X network allows 512 bit time delay between any two node stations in a collision domain Switch based Media Converter breaks up TP and Fiber segments collision domain to extend the cabling distance e TP Cable Limitations Cat 5 and up to 100m e Converter Fiber Cable Limitations SC ST LC Converter Models Multi mode Half duplex 412m Multi mode Full duplex 2Km Single mode Half duplex 412m Single mode Full duplex _ 5 20 40 60 80 100Km 10 PoE PSE TP Fiber Technical Specifications e Standards IEEE802 3u 10 100Base TX 100Base FX IEEE802 3af Power over Ethernet e Cat 5 cable and up to100m Fiber Cable 50 125 62 5 125 or 100 140 um multi mode 8 3 125 8 7 125 9 125 or 10 125 single mode PSE Power Feeding Supports Endpoint via TP pin 1 2 3 6 e LED Indicators POWER PoE TP LNK ACT 100 FX LNK ACT FDX COL 4W 7W 15 4W e Data Transfer Rate Speed Forwarding Rate 100Mbps 148 800 PPS 10Mbps 14 880 PPS e Flow Control IEEE802 3x compliant for full duplex Backpressure flow control for half duplex Power Requirement AC Line 100 240V 50 60Hz Power Consumption 24W e Ambient Temperature 0 to 50 C e Humidity 5 to 90 e Dimensions 40 H x 158 W x 133 D mm e Complies with FCC Part 15 Class A and CE Mark Note For connecting this device to Router Bridge or Sw
7. RITTEN DOCUMENTAITON IN TERMS OF CORRECTNESS ACCURACY RELIABILITY OR OTHERWISE CONSEQUENTIAL DAMAGES IN NO EVENT SHALL MANUFACTORY OR ITS AUTHORIZED RESELLER BE LIABLE TO LICENSEE OR ANY THIRD PARTY FOR A ANY MATTER BEYOND ITS REASONABLE CONTROL OR B ANY CONSEQUENTIAL SPECIAL INDIRECT OR INCIDENTAL DAMAGES ARISING OUT OF THIS LICENSE OR USE OF THE SOFTWARE PROVIDED BY MANUFACTORY EVEN IF MANUFACTORY HAS BEEN NOTIFIED OF THE POSSIBILITY OF SUCH DAMAGES IN ADVANCE IN NO EVENT SHALL THE LIABILITY OF MANUFACTORY IN CONNECTION WITH THE SOFTWARE OR THIS AGREEMENT EXCEED THE PRICE PAID TO MANUFACTORY FOR THE LICENSE TERM AND TERMINATION The License is effective until terminated however all of the restrictions in regard to Manufactory s copyright in the Software and related documentation will cease being effective at the date of expiration Notwithstanding the termination or expiration of the term of this agreement it is acknowledged and agreed that those obligations relating to use and disclosure of Manufactory s confidential information shall survive Licensee may terminate this License at any time by destroying the software together with all copies thereof This License will be immediately terminated if Licensee fails to comply with any term and condition of the Agreement Upon any termination of this License for any reason Licensee shall discontinue to use the Software and shall destroy or return all copies of the Software and the related docume
8. ay be returned to Manufactory then Manufactory will replace the media Manufactory shall not be responsible for the replacement of media if the failure of the media results from accident abuse or misapplication of the media EXCLUSIONS The warranty as mentioned above does not apply to the Software which 1 customer does not comply with the manual instructions offered by Manufactory in installation operation or maintenance 2 Product fails due to damage from unusual external or electrical stress shipment storage accident abuse or misuse 3 Product is used in an extra hazardous environment or activities 4 any serial number on the Product has been removed or defaced or 5 this warranty will be of no effect if the repair is via anyone other than Manufactory or the authorized agents The maximum liability of Manufactory under this warranty is confined to the purchase price of the Product covered by this warranty ii DISCLAIMER EXCEPT AS PROVIDED ABOVE THE SOFTWARE IS PROVIDED AS IS AND MANUFACTORY AND ITS LICENSORS MAKE NO WARRANTIES EXPRESS OR IMPLIED WITH REPSECT TO THE SOFTWARE AND DOCUMENTAITON MANUFACTORY AND ITS LICENSORS DISCLAIM ALL OTHER WARRANTIES INCLUSIVE OF WITHOUT LIMITATION IMPLIED WARRANTIES OR MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT FURTHER MANUFACTORY DOES NOT WARRANT GUARANTEE OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE SOFTWARE OR RELATED W
9. documentation including any revisions made by Manufactory The copyright notice must be reproduced and included with any copy of any portion of the Software or related documentation Except as expressly authorized above Licensee shall not copy or transfer the Software or related documentation in whole or in part Licensee also shall not modify translate decompile disassemble use for any competitive analysis reverse compile or reverse assemble all or any portion of the Software related documentation or any copy The Software and related documentation embody Manufactory s confidential and proprietary intellectual property Licensee is not allowed to disclose the Software or any information about the operation design performance or implementation of the Software and related documentation that is confidential to Manufactory to any third party Software and related documentation may be delivered to you subject to export authorization required by governments of Taiwan and other countries You agree that you will not export or re export any Software or related documentation without the proper export licenses required by the governments of affected countries LIMITED SOFTWARE WARRANTY Manufactory warrants that any media on which the Software is recorded will be free from defects in materials under normal use for a period of twelve 12 months from date of shipment If a defect in any such media should occur during the effective warranty period the media m
10. e for ensuring the shipments are insured with the transportation charges prepaid and the RMA number clearly marked on the outside of the package Manufactory will not accept collect shipments or those returned without an RMA number Manufactory shall not be responsible for any software firmware information or memory data contained in stored on or integrated with any Product returned to Manufactory pursuant to any warranty EXCLUSIONS The warranty as mentioned above does not apply to the following conditions in Manufactory s judgment it contains 1 customer does not comply with the manual instructions offered by Manufactory in installation operation repair or maintenance 2 Product fails due to damage from unusual external or electrical stress shipment storage accident abuse or misuse 3 Product is used in an extra hazardous environment or activities 4 any serial number on the Product has been removed or defaced 5 this warranty will be of no effect if the repair is via anyone other than Manufactory or the approved agents or 6 In the event of any failures or delays by either party hereto in the performance of all or any part of this agreement due to acts of God war riot insurrection national emergency strike embargo storm earthquake or other natural forces or by the acts of anyone not a party to this agreement or by the inability to secure materials or transportation then the party so affected shall be executed from any f
11. e package contains the following The PoE PSE TP Fiber Converter AC Power Cord This User s Manual Please notify your sales representative immediately if any of the aforementioned items is missing or damaged 4 Installing the Converter Note The Media Converter is hot swappable Wear a grounding device for electrostatic discharge 4 1 PSE TP Fiber Converter with Powered Device PD Connect the PSE media converter to an AC power source Install the TP media cable to the IEEE 802 3af PD converter See Fig 2 Note It can work as a pure converter that connects to the non PoE converter Install the media cable for network connection Warning Verify that the AC input conforms to your country AC power requirement and then insert the power plug Ensure that the power of PSE device is turned on Install the media cable for network connection Default AUTO AUTO or FORCE setting see Fig 12 SI Bit 1 Attach TP Cat 5 cable to TP port and the distance can TP Port be up to 100m Use the straight through cable to connect the switch or workstation the 10 100 TP port can support AUTO MDI X sensing Default 100FDX JO0OFDX 100HDX setting see Fig 12 SI Bit 5 Fiber Port Fig The View of PoE PSE Media Converter RJ 45 Jack a ji 2 100FX Fiber Networ Fiber Optic Q PD Device Cat 5 Cable Refer to Fig 6 l Fig 2 Connection among PSE Ethern
12. et Switch Fiber and TP Cables 100FX Fiber Network lt lt _ RX PoE PSE TP to 100FX Converter PoE PD or T PoE Splitter Fig 3 PSE to PD or PoE Splitter AC PSE 10 100Base TX to 100Base FX Media Converter wO Qu TX RX PoE Power Sourcing Equipment SO Ont On 802 3af Endpoint FX PSE TP Fig 4 PoE PSE Media Converter Front Panel AC Line 100 240V 50 60Hz 2 This device complies with Part 15 of the FCC Rules I s m Il MADE IN TAIWAN Fig 5 PoE PSE Media Converter Rear Panel Fig 6 Endpoint PSE RJ 45 Male Connector IEEE802 3af assigns pairs on the RJ 45 connector and Cat 5 cable of Endpoint Endpoint 48V via TP pin 1 2 3 6 5 WDM Single Fiber Model The TP Fiber converter is specially designed with an optic Wavelength Division Multiplexing WDM model that can transport bi directional full duplex signal over a single fiber simultaneously Single Fiber Model TX RX Wavelength TX Transmit 1310nm Single Mode 20Km 1310nm 40 60Km models are option RX Receive 1550nm TX Transmit 1550nm Single Mode 20Km 1550nm 40 60Km models are option RX Receive 1310nm Note The 1310nm and 1550nm models must be installed in pairs 1 install 1310nm model at one end and 1550nm model at the other one PSE 10 100Base TX to 100Base FX Media Converter aO Quoc Quac 0 a oe PoE Power So
13. itch please refer to the corresponding device s Technical Manual 10
14. ntation GENERAL This License shall be governed by and construed pursuant to the laws of Taiwan If any portion hereof is held to be invalid or unenforceable the remaining provisions of this License shall remain in full force and effect Neither the License nor this Agreement is assignable or transferable by Licensee without Manufactory s prior written consent any attempt to do so shall be void This License constitutes the entire License between the parties with respect to the use of the Software LICENSEE ACKNOWLEDGES THAT LICENSEE HAS READ THIS AGREEMENT UNDERSTANDS IT AND AGREES TO BE BOUND BY ITS TERMS AND CONDITIONS LICENSEE FURTHER AGREES THAT THIS AGREEMENT IS THE ENTIRE AND EXCLUSIVE AGREEMENT BETWEEN MANUFACTORY AND LICENSEE ili Table of Contents D H 2 Model Description sese vemos n vegas 3 TTC dec EL 4 Installing the Converter eeu evo n eR geek Den 5 WDM Single Fiber Model ere 6 Link Fault Pass Ehrouglh ae e ERFAHREN nt EE EA LED DOSeriploH uon ras cn pv Ea ez ce EU iva rod 8 Connecting to TB Fiber Device ssccssscseiscvssvscassdiveenssssvevesvesevenssbenvassvoussbeveversanndocnenes 9 Cable Connection Paramteter esee eee eee eee eene ntn ntn sitne tnn tn nein sn I0 POE PSE FPSPIDOF a ad eas Rea iv
15. urcing Equipment sa Om 802 3af Endpoint a PSE TP Fig 7 PoE PSE WDM Single Fiber Converter Front Panel TX 1310 RX 1550 lt gt D TX 1550 RX 1310 Hu P ud B PoE PSE TP to 100FX Single Fiber PoE PSE TP to 100FX WDM Single Fiber WDM SingleFiber TP Fig 8 Power from PSE to PD 6 Link Fault Pass Through This media converter supports link fault pass through LFP in TX FX converter application Link status on one port is propagated to the other port to notice the remote nodes If TP port is unplugged this converter stops transmission on fiber port This causes the remote fiber node link to fail LED shows the link failure on both TP and fiber ports If fiber link fails this converter restarts auto negotiation on TP port but always stays in the link failure state This causes the remote TP node link to fail LED also shows the link failure on both TP and fiber ports Refer to Fig 9 shown below for the normal status when the link succeeds Also refer to Fig 10 and Fig 11 for the erroneous status when TP Cable A Fiber Cable B or Fiber Cable C fails to connect Note Link fault pass through function only takes effect as S1 Bit4 see Fig 12 is enabled Disabled S1 Bit4 will turn this media converter into a general one 10 100 10 100 Remote Switch A Switch Station K EEE EENEK o eo e Cable Fig 9 Normal status via a pair of LFPs
16. urther performance for a period of time after the occurrence as may reasonably be necessary to remedy the effects of that occurrence but in no event more than sixty 60 days If any of the stated events should occur Party A shall promptly notify Party B in writing as soon as commercially practicable but in no event more than twenty 20 business days and provide documentation evidencing such occurrence In no event shall the maximum liability of Manufactory under this warranty exceed the purchase price of the Product covered by this warranty DISCLAIMER EXCEPT AS SPECIFICALLY PROVIDED ABOVE AS REQUIRED AS IS AND THE WARRANTIES AND REMEDIES STATED ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS ORAL OR WRITTEN EXPRESS OR IMPLIED ANY AND ALL OTHER WARRANTIES INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR THIRD PARTY RIGHTS ARE EXPRESSLY EXCLUDED MANUFACTORY SOFTWARE LICENSE AGREEMENT NOTICE Please carefully read this Software License Agreement hereinafter referred to as this Agreement before copying or using the accompanying software or installing the hardware unit with pre enabled software or firmware each of which is referred to as Software in this Agreement BY COPYING OR USING THE SOFTWARE YOU ACCEPT ALL OF THE PROVISIONS AND CONDITIONS OF THIS AGREEMENT THE PROVISIONS EXPRESSED IN THIS AGREEMENT ARE THE ONLY PROVISION UNDER WHICH MANUFACTORY WILL PERMIT YOU TO USE T

Manual

Contents

Download Pdf Manuals

Related Search

Related Contents