Home

User`s Manual

Contents

1. M Using the Built in Flash Before taking a photograph with the flash in P S A M or t1 mode press the button to raise the flash and wait for the indicator to be displayed in the viewfinder M 18 Shooting will be interrupted if the flash is raised while a remote control mode is in effect or after the self timer has started If the flash is required the camera will only respond to the ML L3 shutter release button once the flash has charged In auto scene and special effects modes in which the flash pops up automatically the flash will begin charging when a remote control mode is selected once the flash is charged it will automatically pop up and fire when required In flash modes that support red eye reduction the red eye reduction lamp will light for about one second before the shutter is released in quick response remote mode In delayed remote mode the self timer lamp will light for two seconds followed by the red eye reduction lamp which lights for one second before the shutter is released See Also For information on choosing the duration of the self timer and the number of shots taken see Custom Setting c3 Self timer N 66 For information on choosing how long the camera will wait for a signal from the remote see Custom Setting c4 Remote on duration ML L3 N 66 For information on controlling the beeps that sound when the self timer and remote control are used see Custom Setting d1 Beep 66 29
2. Time remaining 53 4 End recording Press the movie record button again to end recording Recording will end automatically when the maximum length is reached the memory card is full another mode is selected the lens is removed or the monitor is closed closing the monitor does not end recording on televisions or other external displays Taking Photographs During Movie Recording To end movie recording take a photograph and exit to live view press the shutter release button all the way down and hold it in this position until the shutter is released Maximum Length The maximum length for individual movie files is 4 GB for maximum recording times see page 55 note that depending on memory card write speed shooting may end before this length is reached C1 77 M Recording Movies Flicker banding or distortion may be visible in the monitor and in the final movie under fluorescent mercury vapor or sodium lamps or if the camera is panned horizontally or an object moves at high speed through frame flicker and banding can be reduced using Flicker reduction M 66 Bright light sources may leave after images when the camera is panned Jagged edges color fringing moir and bright spots may also appear Bright bands may appear in some areas of the frame if the subject is briefly illuminated by a flash or other bright momentary light source When recording movies avoid pointing the camera at the sun or other strong light sources
3. High key M 60 Low key M 60 Auto Modes Select these modes for simple point and shoot photography e Auto M 15 e Auto flash off 4 15 Scene Modes The camera automatically optimizes settings to suit the scene selected with the mode dial Match your selection to the scene being photographed Portrait 1 19 e amp Sports A 20 Landscape M 19 e amp Close up CO 20 Z Child ZO 20 e SCENE Other scenes C1 21 Scene Auto Selector Live View Selecting live view in amp or mode enables automatic scene selection scene auto selector A 50 when autofocus is used The Viewfinder T 1SO 0 Ed Ee Pia ed alto D k Lae 0 C Framing grid displayed when E Aperture f number 42 43 EJ Flexible program indicator On is selected for Custom fJ Low battery warning 14 EFA Exposure indicator 43 Setting d2 12 Bracketing indicator Exposure compensation 2 FOCUS POINTS csesseseseeeeeeees 33 Number of exposures display ETE ET 44 JEJ AF area brackets 10 15 FEMAINING wos 14 Electronic rangefinder IE Low battery warning 14 Number of shots remaining K Flash compensation PA indicator before memory buffer INdICAtOT oo esseecseesseeceeeseeesees 44 displayed when the lS saaa aa 27 K Exposure compensation Monochrome Picture White balance recording AICA TON issan 44 Control or a Pi
4. Metering method Matrix Frame size pixels and 1920 x 1080 60i 59 94 fields s 50i 50 fields s high normal frame rate e 1920 x 1080 30 p progressive 25p 24p high normal e 1280 x 720 60p 50p high normal e 640 x 424 30p 25p high normal Frame rates of 30p actual frame rate 29 97 fps 60i and 60p actual frame rate 59 94 fps are available when NTSC is selected for video mode 25p 50i and 50p are available when PAL is selected for video mode Actual frame rate when 24p is selected is 23 976 fps File format MOV Video compression H 264 MPEG 4 Advanced Video Coding Audio recording format Linear PCM Audio recording device Built in or external stereo microphone sensitivity adjustable ISO sensitivity ISO 100 6400 can also be set to approx 0 3 0 7 1 or 2 EV ISO 25600 equivalent above ISO 6400 Sensor output is about 60 or 50 fps Monitor Monitor 7 5 cm 3 in approx 921k dot VGA vari angle TFT monitor with 170 viewing angle approx 100 frame coverage and brightness adjustment Playback Playback Full frame and thumbnail 4 9 or 72 images or calendar playback with playback zoom movie playback photo and or movie slide shows histogram display highlights auto image rotation and image comment up to 36 characters Interface USB Hi Speed USB Video output NTSC PAL HDMI output Type C mini pin HDMI connector Accessory terminal Wireless remote controller WWR R10 wireless remote
5. 1920 x 1080 60i 50i crop Recording in progress 55 e Manual movie settings Choose On to allow manual Movie settings A Manual movie settings adjustments to shutter speed and ISO sensitivity when the camera is in mode M Shutter speed can be set to values as On 3 fast as 1 4000 s the slowest speed available varies with the frame rate 1 30 s for frame rates of 24p 25p and 30p 1 50 s for 50i or 50p and eo s for 60i or 60p ISO sensitivity can be set to values between ISO 100 and Hi 2 39 If shutter speed and ISO sensitivity are not in these ranges when live view starts they will automatically be set to supported values and remain at these values when live view ends Note that ISO sensitivity is fixed at the value selected the camera does not adjust ISO sensitivity automatically when On is selected for ISO sensitivity settings gt Auto ISO sensitivity control in the shooting menu M 66 1 Select Movie settings ee Press the MENU button to display the menus Highlight Movie settings in the shooting menu and press P meV MENU button 2 Choose movie options Movie settings Highlight the desired item and press then 5 E highlight an option and press ToT Microphone DA Manual movie settings OFF Using an External Microphone The optional ME 1 stereo microphone can be used to reduce noise caused by lens vibration being recorded during autofocus The Count Down Display A count down will
6. 46 AF area mode The current AF area mode 47 ine lena The recording time remaining in movie mode 53 movie mode 9 fe mame The frame size of movies recorded in movie mode 55 manua aiii Displayed when On is selected for Manual movie settings in 0 settings 56 o mode M indicator The current focus point The display varies with the option Cir Focus poll selected for AF area mode M 47 me E Exposure Indicates whether the photograph would be under or over 43 indicator exposed at current settings mode M only 2 ona a ey 30s HA D a B Item Description ag 1 Shootingmode The mode currently selected with the mode dial pe 2 Nomovie icon Indicates that movies can not be recorded Time remainin The amount of time remaining before live view ends A ee J automatically Displayed if shooting will end in 30 s or less i Microphone oe sensitivity Microphone sensitivity for movie recording 55 Sound level Sound level for audio recording Displayed in red if level is too 55 D Note Display shown with all indicators lit for illustrative purposes 49 50 Live View Movie Recording Display Options Press the i button to cycle through display options as shown below Circled areas indicate edges of movie frame crop AF S fot THOF EA A ESD CD A CEINORM ma 1125 F5 6 10100 1 0k 1 125 F5 6 10100 1 0k Show photo Show movie Hide indicators Framing grid indicators
7. C 41 F 95 F Do not use the battery at ambient temperatures below 0 C 32 F or above 40 C 104 F failure to observe this precaution could damage the battery or impair its performance Capacity may be reduced and charging times may increase at battery temperatures from 0 C 32 F to 15 C 59 F and from 45 C 113 F to 60 C 140 F The battery will not charge if its temperature is below 0 C 32 F or above 60 C 140 F If the CHARGE lamp flashes quickly about eight times a second during charging confirm that the temperature is in the correct range and then unplug the charger and remove and reinsert the battery If the problem persists cease use immediately and take battery and charger to your retailer or a Nikon authorized service representative Do not attempt to charge a fully charged battery Failure to observe this precaution will result in reduced battery performance Use the charger with compatible batteries only Unplug when not in use Removing the Battery To remove the battery turn the camera off and open the battery chamber cover Press the battery latch in the direction shown by the arrow to release the battery and then remove the battery by hand Formatting Memory Cards If this is the first time the memory card will be used in the 5 SETUP MENU Format memory card camera or if the card has been formatted in another device O Monitor brightness Info display format select Format memory c
8. Failure to observe this precaution could result in damage to the camera s internal circuitry The camera can record both video and sound do not cover the microphone during recording Note that the built in microphone may record lens noise during autofocus and vibration reduction Flash lighting can not be used during movie recording Live view may end automatically to prevent damage to the camera s internal circuits exit live view when the camera is not in use Note that the temperature of the camera s internal circuits may rise and noise bright spots randomly spaced bright pixels or fog may be displayed in the following instances the camera may also become noticeably warm but this does not indicate a malfunction e The ambient temperature is high e The camera has been used for extended periods in live view or to record movies e The camera has been used in continuous release mode for extended periods If live view does not start when you attempt to start live view or movie recording wait for the internal circuits to cool and then try again Matrix metering is used regardless of the metering method selected Shutter speed and ISO sensitivity are adjusted automatically unless On is selected for Manual movie settings M 56 and the camera is in mode M 54 Movie Settings Use the Movie settings option in the shooting menu to adjust the following settings e Frame size frame rate Movie quality Choose from the following
9. Hi 0 7 Hi 1 Hi 2 Place the cursor in the information display If shooting information is not displayed in the monitor press the amp button Press the lt button again to place the cursor in the information display W button Display ISO sensitivity options Highlight the current ISO sensitivity in the information display and press Choose an ISO sensitivity Highlight an option and press 68 To return to shooting mode press the shutter release button halfway See Also Auto ISO sensitivity control can be enabled in modes P S A and M using the Auto ISO sensitivity control option in the ISO sensitivity settings menu M 66 For information on Auto 100 6400 in steps of 3 EV Hi 0 3 Hi 0 7 Hi 1 Hi 2 Information display NORM OFF OFF A AUTO ESD AF A fj E3 a 0 0 U0 ISO sensitivity Gi Back ISO sensitivity ee eee 200 250 320 400 500 640 800 1000 1250 Fi e Ta am MOK using the High ISO NR option in the shooting menu to reduce noise at high ISO sensitivities see page 66 For information on using the Fn button and the command dial to select ISO sensitivity see Custom Setting f1 Assign Fn button 66 Interval Timer Photography The camera is equipped to take photographs automatically at preset intervals Before Shooting Before beginning interval timer photography take a test shot at current settings and view the results in the monitor To ensure that shooting s
10. Note that CJ dynamic area and 3D 3D tracking AF area modes are not available when AF S is selected for focus mode Option Description User selects focus point using multi selector M 33 camera focuses 1 Single point AF on subject in selected focus point only Use with stationary bJ9 t721 E339 3D mm subjects In AF A and AF C focus modes user selects focus point using multi Dynamic area AF selector M 33 but camera will focus based on information from 9 points surrounding focus points if subject briefly leaves selected point The number of focus points varies with the mode selected e 9 point dynamic area AF Choose when there is time to compose the Dynamic area AF photograph or when photographing subjects that are moving 21 points predictably e g runners or race cars on a track e 21 point dynamic area AF Choose when photographing subjects that are moving unpredictably e g players at a football game Dynamic area AF e 39 point dynamic area AF Choose when photographing subjects that 39 points are moving quickly and can not be easily framed in the viewfinder e g birds In AF A and AF C focus modes user selects focus point using multi selector CO 33 If subject moves after camera has focused camera uses 3D tracking to select new focus point and keep focus locked on original subject while shutter release button is pressed halfway Use to quickly compose pictures with subjects that are
11. TEE TE insert another memory card 8 or delete some photos M 25 Point and Shoot Photography amp and Modes This section describes how to take photographs in amp and modes automatic point and shoot modes in which the majority of settings r s AUTO are controlled by the camera in response to shooting conditions 1 Turn the camera on Remove the lens cap and turn the camera on The information display will appear in the monitor 2 Select amp or mode To shoot where use of a flash is prohibited photograph infants or capture natural lighting under low light select auto flash off mode by rotating the mode dial to Otherwise rotate the dial to G auto 3 Ready the camera When framing photographs in the viewfinder hold the handgrip in your right hand and cradle the camera body or lens with your left Keep your elbows propped lightly against your torso for support and place one foot half a pace ahead of the other to keep your upper body stable When framing photographs in portrait tall orientation hold the camera as shown at right In mode shutter speeds slow when lighting is poor use of a tripod is recommended 4 Frame the photograph Frame a photograph in the viewfinder with the main subject in the AF area brackets AF area brackets 15 16 5 Press the shutter release button halfway Press the shutter release butto
12. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK CAREFULLY FOLLOW THESE INSTRUCTIONS For connection to a supply not in the U S A use an attachment plug adapter of the proper configuration for the power outlet if needed This power unit is intended to be correctly oriented in a vertical or floor mount position Federal Communications Commission FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio television technician for
13. We Fb Lea OK LOL 46 EE Choosing an AF Area Mode In modes other than and amp the following AF area modes can be selected in live view note that subject tracking AF is not available in 24 amp and 4 modes Option Description The camera automatically detects and focuses on portrait subjects Use for portraits z3 Use for hand held shots of landscapes and other non portrait ki Wide area AF subjects Use the multi selector to ee the focus Seine Use for pin point focus on a selected spot in the frame A tripod is recommended 46 Subject tracking AF Track a selected subject as it moves through the frame 9 Face priority AF ba Normal area AF 1 Place the cursor in the information P display en A ELIE TLL Image quality Press the lt amp button to place the cursor in the J A x o JA ESD AF S bd m 00 00 information display Bak OK 711 dE Er WE F56 100 1 0k button 2 Display AF area modes Highlight the current AF area mode in the AF area mode 2 d information display and press lt S ii rpk a PTT ESD A ma 0 0 a 00 Gi Back WOK K PEER E 10100 1 0k 3 Choose an AF area mode AF area mode Highlight an option and press To return to live Nomalara AF view press B Se gt bot g F LEa a OK LO 47 48 EE Choosing the Focus Point The method for selecting the focus point for autofocus varies with the option
14. designed to convert from one voltage to another or with DC to AC inverters Failure to observe this precaution could damage the product or cause overheating or fire A Use appropriate cables When connecting cables to the input and output jacks use only the cables provided or sold by Nikon for the purpose to maintain compliance with product regulations Z CD ROMs CD ROMs containing software or manuals should not be played back on audio CD equipment Playing CD ROMs on an audio CD player could cause hearing loss or damage the equipment e Nikon will not be held liable for any damages resulting from the use of this product e While every effort has been made to ensure that the information in these manuals is accurate and complete we would appreciate it were you to bring any errors or omissions to the attention of the Nikon representative in your area address provided separately This symbol on the battery indicates that the battery is to be collected separately The following apply only to users in European countries e All batteries whether marked with this symbol or not are designated for separate collection at an appropriate collection point Do not dispose of as household waste e For more information contact the retailer or the local authorities in charge of waste management vi Notices for Customers in the U S A The Battery Charger IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS DANGER
15. inserted in the camera Connect the camera to the computer using the supplied UC E17 USB cable and then turn the camera on Ans SOT i e SD card slot If your computer is equipped with an SD card slot the card can be inserted directly in the slot e SD card reader Connect a card reader available separately from third party suppliers to the computer and insert the memory card 2 Start Nikon Transfer 2 component of ViewNxX 2 If a message is displayed prompting you to choose a program select Nikon Transfer 2 Windows 7 If the following dialog is displayed select Nikon Transfer 2 as described below 1 Under Import pictures and videos click ae Change program A program selection dialog ono will be displayed select Import File using a E Nikon Transfer 2 and click OK b 2 Double click Import File 3 Click Start Transfer At default settings all the pictures on the memory card will be copied to the computer Start Transfer 72 4 Terminate the connection If the camera is connected to the computer turn the camera off and disconnect the USB cable If you are using a card reader or card slot choose the appropriate option in the computer operating system to eject the removable disk corresponding to the memory card and then remove the card from the card reader or card slot View Pictures Pictures are displayed in ViewNX 2 when transfer is complete Starti
16. to select the center focus point NORM OFF OFF A AUTO 100 ASD AF A Ce ES i 00 amp 00 2 See Also For information on the AF area modes available in live view see page 47 For information on using the Fn button and the command dial to select an AF area mode see Custom Setting f1 Assign Fn button M 66 33 34 Image Quality and Size Together image quality and size determine how much space each photograph occupies on the memory card Larger higher quality images can be printed at larger sizes but also require more memory meaning that fewer such images can be stored on the memory card Image Quality Choose a file format and compression ratio image quality Option File type Description NEF RAW Two images are recorded one NEF RAW image and one fine quality JPEG JPEG fine image NEF RAW NEF Two images are recorded one NEF RAW image and one normal quality JPEG JPEG normal JPEG image NEF RAW Two images are recorded one NEF RAW image and one basic quality JPEG basic JPEG image Raw 14 bit data from the image sensor are saved directly to the memory NEF RAW NEF card Settings such as white balance and contrast can be adjusted after ve shooting JPEG fine Record JPEG images at a compression ratio of roughly 1 4 fine quality JPEG normal JPEG Record JPEG images at a compression ratio of roughly 1 8 normal quality JPEG basic Record JPEG images at a compression ratio of
17. 800 SB 700 SB 600 or SB 400 i TTL balanced fill flash for digital SLR is used with matrix and center weighted metering standard i TTL flash for digital SLR with spot metering Auto auto with red eye reduction auto slow sync auto slow sync with red eye reduction fill flash red eye reduction slow sync slow sync with red eye reduction rear curtain with slow sync rear curtain sync off 3 1 EV in increments of 3 or 2 EV Lights when built in flash or optional flash unit is fully charged flashes after flash is fired at full output ISO 518 hot shoe with sync and data contacts and safety lock Advanced Wireless Lighting supported with SB 910 SB 900 SB 800 or SB 700 as a master flash or SU 800 as commander Flash Color Information Communication supported with all CLS compatible flash units AS 15 sync terminal adapter available separately Auto incandescent fluorescent 7 types direct sunlight flash cloudy shade preset manual all except preset manual with fine tuning Live view Lens servo e Autofocus AF Single servo AF AF S full time servo AF AF F e Manual focus MF AF area mode Face priority AF wide area AF normal area AF subject tracking AF Autofocus Contrast detect AF anywhere in frame camera selects focus point automatically when face priority AF or subject tracking AF is selected Automatic scene Available in and modes selection Movie Metering TTL exposure metering using main image sensor
18. When this switch is in the p lock position the memory card can not be formatted and photos can not be deleted or recorded a beep will sound if Write protect switch you attempt to release the shutter To unlock the memory card slide the switch to the write position 12 CPU Lenses with Aperture Rings In the case of CPU lenses equipped with an aperture ring M 75 lock aperture at the minimum setting highest f number Detaching the Lens Be sure the camera is off when removing or exchanging lenses To remove the lens press and hold the lens release button while turning the lens clockwise After removing the lens replace the lens caps and camera body cap Retracting Lenses with Retractable Lens Barrel Buttons To retract the lens when the camera is not in use hold the retractable lens barrel button and rotate the zoom ring to the L lock position as shown Retract the lens before removing it from the camera and be careful not to press the retractable lens barrel button when attaching or removing the lens The Camera Clock The camera clock is less accurate than most watches and household clocks Check the clock regularly against more accurate time pieces and reset as necessary The Clock Battery The camera clock is powered by an independent rechargeable power source which is charged as necessary when the main battery is installed or the camera is powered by an optiona
19. copies are to be provided for business use by a company Also do not copy or reproduce passports issued by the government licenses issued by public agencies and private groups ID cards and tickets such as passes and meal coupons stamped Sample The copying or reproduction of paper money coins or securities which are circulated in a foreign country is prohibited Unless the prior permission of the government has been obtained the copying or reproduction of unused postage stamps or post cards issued by the government is prohibited e Comply with copyright notices The copying or reproduction of copyrighted creative works such as books music paintings woodcuts prints maps drawings movies and photographs is governed by national and international copyright laws Do not use this product for the purpose of making illegal copies or to infringe copyright laws The copying or reproduction of stamps issued by the government and of certified documents stipulated by law is prohibited Disposing of Data Storage Devices Please note that deleting images or formatting memory cards or other data storage devices does not completely erase the original image data Deleted files can sometimes be recovered from discarded storage devices using commercially available software potentially resulting in the malicious use of personal image data Ensuring the privacy of such data is the user s responsibility Before discarding a data storag
20. high e The camera has been used for extended periods in live view or to record movies e The camera has been used in continuous release mode for extended periods If live view does not start when you attempt to start live view wait for the internal circuits to cool and then try again The Count Down Display A count down will be displayed 30 s before live view ends automatically A 49 the timer turns red 5 s before the auto off timer expires or if live view is about to end to protect the internal circuits Depending on shooting conditions the timer may appear immediately when live view is selected Note that although the count down does not appear in the information display or during playback live view will still end automatically when the timer expires 51 V Using Autofocus in Live View Autofocus is slower in live view and the monitor may brighten or darken while the camera focuses The camera may be unable to focus in the following situations The subject contains lines parallel to the long edge of the frame The subject lacks contrast The subject in the focus point contains areas of sharply contrasting brightness or the subject is lit by spot lighting or by a neon sign or other light source that changes in brightness Flicker or banding appears under fluorescent mercury vapor sodium vapor or similar lighting A cross star filter or other special filter is used The subject appears smaller than the focus point The subject is dom
21. i E u OFF OFF mA AUTO 100 0 amp OU CijSet Optimal exposure Underexposed by 1 3 EV Overexposed by over 2 EV 0 0 mimi 43 Exposure Compensation Mode P S A and 4 Only Exposure compensation is used to alter exposure from the value suggested by the camera making pictures brighter or darker Choose from values between 5 EV underexposure and 5 EV overexposure in increments of 3EV In general positive values make the subject brighter while negative values make it darker 1 Place the cursor in the information display If shooting information is not displayed in the monitor press the amp button Press the lt button again to place the cursor in the information display NORM OFF OFF A AUTO 100 FISD AF A i E a 001a 00 W button Information display 2 Display exposure compensation options Highlight exposure compensation in the information display and press NORM OFF OFF A AUTP sa0 ESD AF A Gm i 0 Exposure compensation Qora 3 Choose a value Highlight a value and press To return to see shooting mode press the shutter release button halfway 3 50 450 Fb slam MOK Normal exposure can be restored by setting exposure compensation to 0 Exposure compensation is not reset when the camera is turned off but is reset if you select another mode after choosing HA The amp Button Exposure compensation can also be
22. indicators N 53 A A crop showing the area recorded is displayed during movie recording when frame sizes other than 640 x 424 are selected for Movie settings gt Frame size frame rate in the shooting menu M 55 the area outside the movie frame crop is grayed out when movie indicators are displayed Automatic Scene Selection Scene Auto Selector If live view is selected in amp or mode the camera will automatically analyze the subject and select the appropriate shooting mode when autofocus is enabled The selected mode is shown in the monitor CI 49 Portrait Human portrait subjects Landscapes and cityscapes Subjects close to the camera Night portrait Portrait subjects framed against a dark background AUTO Subjects suited to amp or mode or that do not fall into the categories Auto flash off listed above Exposure Depending on the scene exposure may differ from that which would be obtained when live view is not used Metering in live view is adjusted to suit the live view display producing photographs with exposure close to what is seen in the monitor In P S A and 44 modes exposure can be adjusted by 5 EV in increments of 3 EV by rotating the command dial while keeping the 4 button pressed Note that the effects of values over 3 EV or under 3 EV can not be previewed in the monitor 21 ce S D c lt m Shooting in Live View Mode To prevent light enterin
23. moving erratically from side to side e g tennis players If subject leaves viewfinder remove your finger from shutter release button and recompose photograph with subject in selected focus point Auto area AF Camera automatically detects subject and selects focus point 3D tracking Place the cursor in the information display If shooting information is not displayed in the monitor press the amp button Press the q button again to place the cursor in the information display NORM OFF OFF A AUTO 100 FaSD AFA i 10 W button Information display Display AF area mode options Highlight the current AF area mode in the information display and press Oc OFF GSA AUTO 100 10 k ma 00 amp Gi Bac 3 Choose an AF area mode AF area mode Highlight an option and press 68 To return to Single point AF shooting mode press the shutter release button Sey RE eas eaa on halfway a gt EE OK O Focus Point Selection In manual focus mode or when autofocus is combined with AF area modes other than Auto area AF you can choose from 39 focus points making it possible to compose photographs with the main subject almost anywhere in the frame 1 Choose an AF area mode other than m Auto area AF m 32 raa EGE 9 a21 39 E OK OL 2 Select the focus point Use the multi selector to select the focus point in the viewfinder or information display while the exposure meters are on Press
24. options The frame rate depends on the option currently selected for Video mode in the setup menu M 66 Moviequality 4 nam length Maximum bit rate Mbps o 1 4 Frame size pixels Frame rate high quality Nor al high quality Normal S H Teh w m 1920x 1080 isso Dii hs 24 12 20 min 29 min 59 s mae ees 1280x 720 P T i 29 min 59 s 40x 424 aH 29 min 595 1 Listed value Actual frame rates for 60p 50p 30p 25p and 24p are 59 94 50 29 97 25 and 23 976 fps respectively 2 Available when NTSC is selected for Video mode 3 Available when PAL is selected for Video mode 4 Movies recorded in miniature effect mode are up to three minutes long when played back e Microphone Turn the built in or optional ME 1 stereo microphones M 56 77 on or off or adjust microphone sensitivity Choose Auto sensitivity to adjust sensitivity automatically Microphone off to turn sound recording off to select microphone sensitivity manually select Manual sensitivity and choose a sensitivity The Movie Crop The movie crop can be viewed during live view by pressing the fi button to select the show movie indicators hide indicators or framing grid display M 50 A smaller crop shown by the illustration below at left is used for movies with a Frame size frame rate of 1920 x 1080 60i or 50i during shooting this crop is enlarged to fill the monitor as shown below at right 1125 F5 6 0100 1 0 k
25. roughly 1 16 basic quality 1 Place the cursor in the information display If shooting information is not displayed in the monitor press the amp button Press the lt button again to place the cursor in the information display NORM OFF OFF A AUTO 100 FISD AF A fj E3 ma 00 amp 00 GigSet button Information display 2 Display image quality options Highlight the current image quality in the information display and press Jlo oF OFF 3A AUTO 100 wT Ar A im 0 0 a 00 Image quality 3 Choose afile type Highlight an option and press 68 To return to Image quality NEF RAW pp shooting mode press the shutter release button EDA Ra 224 FINE NORM BASIC halfway FP Fla am OK 0 4 Image Size Choose a size for JPEG images this option is not available for RAW quality images 4 34 Image size Print size cm in Large 50 8 x 33 9 20 x 13 3 M Medium 38 1 x 25 4 15 0 x 10 E Small 25 3 X 16 9 10 x 6 7 Approximate size when printed at 300 dpi Print size in inches equals image size in pixels divided by printer resolution in dots per inch dpi 1 inch approximately 2 54 cm 1 Place the cursor in the information display If shooting information is not displayed in the monitor press the amp button Press the lt button again to place the cursor in the information display OFF OFF A AUTO 100 FISD AF A fm E5 a 00 00 Set W button Information di
26. set by rotating the command dial while keeping the 4 button pressed NORM OFF OFF SSA AUTO ESD AF A amp a7 Exposure compensato 4 button Command dial Live View Framing Photographs in the Monitor Follow the steps below to take photographs in live view 1 Rotate the live view switch The mirror will be raised and the view through the lens will be displayed in the camera monitor The subject will no longer be visible in the viewfinder 2 Position the focus point Position the focus point over your subject as described on page 48 mp 7125 F5 6 3 Focus Press the shutter release button halfway The focus point will flash green while the camera focuses If the camera is able to focus the focus point will be displayed in green if the camera is unable to focus the focus point will flash red note that pictures can be taken even when the focus point flashes AUTO red check focus in the monitor before shooting Except in amp and modes exposure can be locked by pressing the t O n button 4 Take the picture Press the shutter release button the rest of the way down The monitor turns off and the memory card access lamp lights during recording Do not remove the battery or memory card or unplug the optional AC adapter until Memory card access lamp recording is complete When shooting is complete the photograph will be displayed in the monitor for a few seconds or unti
27. takes photographs at about 3 frames per second fps while the shutter release button is pressed Continuous H continuous high speed The camera takes photographs at about 5 fps while the shutter release button is pressed Self timer Use self timer for self portraits or to reduce blurring caused by camera shake 1 M 28 Delayed remote ML L3 Shutter is released 2 s after shutter release button on optional ML L3 QO 77 remote control is pressed M 28 Quick response remote ML L3 Shutter is released when shutter release button on optional ML L3 277 remote control is pressed M 28 Quiet shutter release As for single frame except that mirror does not click back into place while shutter release button is fully pressed allowing user to control timing of click made by mirror which is also quieter than in single frame mode Also beep does not sound when camera focuses keeping noise to a minimum in quiet surroundings L 1 Press Dy 8 8 Release mode A list of release mode options will be Single frame displayed i _ ae E ETES m 82s 8 0 FD la OK LO Fy button 2 Choose a release mode r elease mode Highlight a release mode and press to return comin to the information display Photographs can be Eie ELE taken immediately i2 m F ITa a OK 0 26 The Memory Buffer The camera is equipped with a memory buffer for temporary storage allowing shooting to continue while p
28. the Internet See the websites listed on page viii for the latest information on supported operating systems Body Cap BF 1B Body Cap BF 1A The body cap keeps the mirror viewfinder screen and low pass filter free of dust when a lens is not in place Filters Body cap 76 e Wireless Remote Control ML L3 M 28 The ML L3 uses a 3 V CR2025 battery K Remote Q controls wireless B remcie Pressing the battery chamber latch to the right insert a fingernail into the controllers gap and open the battery chamber Ensure that the battery is inserted in the correct orientation e Wireless Remote Controller WR R10 WR T10 When a WR R10 wireless remote controller is attached the camera can be controlled wirelessly using a WR T10 wireless remote controller 2 29 Microphones Stereo Microphone ME 1 A 56 The D5200 is equipped with an accessory terminal for WR R10 wireless remote controllers MC DC2 remote cords and Accessory GP 1 GPS units which connect with the lt mark on the SOTO connector aligned with the next to the accessory accessories terminal close the connector cover when the terminal is not in use USBandA V UC E17 and UC E6 USB cables N 72 connector e Wireless Mobile Adapter WU 1a Supports two way communication between the accessories camera and smart devices running the Wireless Mobile Adapter Utility The WR R10 wireless remote control
29. up automatically when the shutter release button is pressed halfway M 36 If the flash is raised photographs can only be taken when the flash ready indicator is displayed If the flash ready indicator is not displayed the flash is charging remove your finger briefly from the shutter release button and try again aol 10 i To save battery power when the flash is not in use return it to its closed position by pressing it gently downward till the latch clicks into place Creative Photography Scene Modes The camera offers a choice of scene modes Choosing a scene mode automatically optimizes settings to suit the selected scene making creative photography as simple as selecting a mode framing a picture and shooting as described on pages 15 16 The Mode Dial The following scenes can be selected with the mode Mode dial dial A Portrait v man Lt ip Eps f s 7 a m e Use for portraits with soft natural looking skin tones If the subject is far from the background or a telephoto lens is used background details will be softened to lend the composition a sense of depth Use for vivid landscape shots in daylight The built in flash and AF assist illuminator turn off use of a tripod is recommended to prevent blur when lighting is poor 19 20 Use for snapshots of children Clothing and background details are vividly rendered while skin tone
30. when memory remains for over 1000 exposures sceccececssseseceeeees 14 Exposure indicator 6 43 Exposure compensation MACAO aoin 44 Bracketing progress IMAICATOT s ccsssassassavevsazeavasenseess 44 FYJ Help icon PJ Image quality essen 34 PJ mage size ission 35 qW button 22 23 24 25 M 5 16 gus 17 99 me so m 8 QUAL B HR AIL B EIS 100 NORM OFF OFF SSA AUTO 100 m0000 SD AF A m m00 00 GijSet image auplity Knap 34 BR Release Mode uses 26 EE Bracketing increment Beep indicator HDR High Dynamic Range T Battery indicator 14 EH Active D Lighting ISO sensitivity ssss1ssss111s 39 EJ White balance ISO sensitivity display 39 ISO sensitivity oes 39 FJJ Exposure compensation 44 FX Flash compensation EX Flash mode esssssesssseseen 37 EJ Metering EJ AF area mode 32 47 BEY Focus Mode csssesssenee 30 46 Picture Control Note Display shown with all indicators lit for illustrative purposes First Steps Always turn the camera off before inserting or removing batteries or memory cards 1 Attach the strap Attach the strap securely to the two eyelets on the camera body as shown below Y D ps j 2 lt 1 gt 2 Charge the battery If a plug adapter is supplied raise the wall plug and connect the plug adapter as shown b
31. 0C Eyepiece Correction Lenses Lenses are available with diopters of 5 4 3 2 0 0 5 1 2 and 3 m when the camera diopter adjustment control is in the neutral position 1 m t Use eyepiece correction lenses only if the desired focus can not be achieved with the built in diopter adjustment control 1 7 to 0 7 m Test eyepiece correction lenses before purchase to ensure that the desired focus can be achieved The rubber eyecup can not be used Viewfinder with eyepiece correction lenses eyepiece e Magnifier DG 2 The DG 2 magnifies the scene displayed in the center of the accessories viewfinder for greater precision during focusing Eyepiece adapter required available separately e Eyepiece Adapter DK 22 The DK 22 is used when attaching the DG 2 magnifier e Right Angle Viewing Attachment DR 6 The DR 6 attaches at a right angle to the viewfinder eyepiece allowing the image in the viewfinder to be viewed at right angles to the lens for example from directly above when the camera is horizontal e Capture NX 2 A complete photo editing package offering such features as white balance adjustment and color control points e Camera Control Pro 2 Control the camera remotely from a computer to record movies and photographs and save photographs directly to the computer hard Software disk Note Use the latest versions of Nikon software Most Nikon software offers an auto update feature when the computer is connected to
32. 9 F to 77 F avoid hot or extremely cold locations Repeat this process at least once every six months e Turning the camera on and off repeatedly when the battery is fully discharged will shorten battery life Batteries that have been fully discharged must be charged before use The internal temperature of the battery may rise while the battery is in use Attempting to charge the battery while the internal temperature is elevated will impair battery performance and the battery may not charge or charge only partially Wait for the battery to cool before charging Continuing to charge the battery after it is fully charged can impair battery performance A marked drop in the time a fully charged battery retains its charge when used at room temperature indicates that it requires replacement Purchase a new EN EL14 battery Charge the battery before use When taking photographs on important occasions ready a spare EN EL14 battery and keep it fully charged Depending on your location it may be difficult to purchase replacement batteries on short notice Note that on cold days the capacity of batteries tends to decrease Be sure the battery is fully charged before taking photographs outside in cold weather Keep a spare battery in a warm place and exchange the two as necessary Once warmed a cold battery may recover some of its charge Used batteries are a valuable resource recycle in accord with local regulations 81 82 Error Message
33. Focus This section describes the focus options available when photographs are framed in the viewfinder Focus can be adjusted automatically or manually see Focus Mode below and the focus point for automatic or manual focus can be selected using the multi selector Focus Mode Choose from the following focus modes Note that AF S and AF C are available only in modes P S A and M Option Description Camera automatically selects single servo autofocus if subject is Auto servo re AF A AF stationary continuous servo autofocus if subject is moving Shutter can only be released if camera is able to focus Single servo For stationary subjects Focus locks when shutter release button is AF pressed halfway Shutter can only be released if camera is able to focus For moving subjects Camera focuses continuously while shutter release button is pressed halfway If subject moves camera will engage Continuous ee ia AF C predictive focus tracking to predict final distance to subject and adjust servo AF focus as necessary M 31 At default settings shutter can only be released if camera is able to focus MF Manual focus Focus using the lens focus ring AF S 1 Place the cursor in the information display If shooting information is not displayed in the monitor press the amp button Press the lt button again to place the cursor in the information display OFF OFF iA AUTO 100 TE ma 00 a00 GigSet W button
34. HDR high dynamic range Long exposure NR El 2 Custom Settings Fine Tuning Camera Settings Reset custom settings a Autofocus al AF C priority selection a2 Number of focus points a3 Built in AF assist illuminator a4 Rangefinder b Exposure b1 EV steps for exposure cntrl cTimers AE lock c1 Shutter release button AE L c2 Auto off timers c3 Self timer c4 Remote on duration ML L3 d Shooting display d1 Beep d2 Viewfinder grid display d3 ISO display d4 File number sequence d5 Exposure delay mode d6 Print date EE Y Setup Menu Camera Setup Format memory card Monitor brightness Info display format Auto info display Clean image sensor Lock mirror up for cleaning Image Dust Off ref photo Video mode HDMI Flicker reduction Time zone and date Language Image comment Auto image rotation DPOF print order High ISO NR ISO sensitivity settings Release mode Multiple exposure Interval timer shooting Movie settings e Bracketing flash e1 Flash cntrl for built in flash e2 Auto bracketing set f Controls f1 Assign Fn button f2 Assign AE L AF L button f3 Reverse dial rotation f4 Slot empty release lock f5 Reverse indicators Accessory terminal Eye Fi upload Wireless mobile adapter Firmware version Only available when compatible Eye Fi memory card is inserted EE 4 Retouch Menu Creating Retouched Copies D Lighting NEF RAW processing Color sketch Red eye correctio
35. In these cases focus manually or use focus lock to focus on another subject at the same distance and then recompose the photograph between the subjectandthe BX areas of sharply contrasting background RSS im brightness Example Subject isthesame Y5 S Example Subject is half in color as the background o the shade The focus point contains objects at different distances from the camera Background objects appear larger than the subject Example A building is in the frame behind the subject t Example Subject is inside a DW cage The subject contains many The subject is dominatedby fine details regular geometri rns Bia Tice p CJUIAE QEUMEUIE PANES a i Example A field of flowers or O20000 Oooog Example Blinds or a row of other subjects that are windows in a skyscraper AA small or lack variation in brightness See Also For information on the focus modes available in live view see page 46 For information on using release priority in continuous servo AF see Custom Setting a1 AF C priority selection 1 66 Custom Setting d1 Beep M 66 can be used to turn the beep speaker on or off There is little or no contrast o The focus point contains 31 32 AF Area Mode Choose how the focus point for autofocus is selected
36. Information display 2 Display focus mode options Highlight the current focus mode in the information display and press NOR OFF OFF aA AUTO 100 i E5 ma 00 a00 ocus mode GBack 3 Choose a focus mode Highlight a focus mode and press 68 To return to anes shooting mode press the shutter release button dace halfway Fb lta a OK 0 4 30 Predictive Focus Tracking In AF C mode or when continuous servo autofocus is selected in AF A mode the camera will initiate predictive focus tracking if the subject moves toward the camera while the shutter release button is pressed halfway This allows the camera to track focus while attempting to predict where the subject will be when the shutter is released Continuous servo Autofocus When Focus is selected for Custom Setting a1 AF C priority selection 66 and the camera is in AF C mode or continuous servo autofocus is selected in AF A mode the camera gives higher priority to focus response has a wider focus range than in AF S mode and the shutter may be released before the in focus indicator is displayed Getting Good Results with Autofocus Autofocus does not perform well under the conditions listed below The shutter release may be disabled if the camera is unable to focus under these conditions or the in focus indicator may be displayed and the camera may sound a beep allowing the shutter to be released even when the subject is not in focus
37. Mode Exposure compensation Bracketing Exposure lock e Matrix metering 3D color matrix metering II type G and D lenses color matrix metering II other CPU lenses e Center weighted metering Weight of 75 given to 8 mm circle in center of frame e Spot metering Meters 3 5 mm circle about 2 5 of frame centered on selected focus point e Matrix or center weighted metering 0 20 EV e Spot metering 2 20 EV CPU AUTO Auto modes amp auto auto flash off programmed auto with flexible program P shutter priority auto S aperture priority auto A manual M scene modes portrait lal landscape amp child amp sports close up Fa night portrait E night landscape X party indoor 8 beach snow 2 sunset i dusk dawn 4 pet Ww portrait candlelight amp blossom autumn colors f food special effects modes 2A night vision E color sketch miniature effect 4 selective color 2 silhouette Hil high key We low key Can be adjusted by 5 5 EV in increments of 3 or 2 EV in P S A and M modes e Exposure bracketing 3 shots in steps of 3 or 2 EV e White balance bracketing 3 shots in steps of 1 e Active D Lighting bracketing 2 shots Luminosity locked at detected value with ii Omm button oo 85 86 Exposure ISO sensitivity Recommended Exposure Index Active D Lighting Focus Autofocus Detection range Lens servo Focus point AF area m
38. Nikon DIGITAL CAMERA D5200 User s Manual pe Nikon Manual Viewer 2 K Use the Nikon Manual Viewer 2 app to view manuals anytime anywhere on your smartphone or tablet Product Documentation The documentation for this product consists of a User s Manual this booklet and a Reference Manual pdf To get the most from your camera please be sure to read all instructions thoroughly and keep them where they will be read by all who use the product For information on basic iai For complete product camera operations see the information see the User s Manual this D5200 Reference Manual booklet available on the supplied reference CD The Reference Manual can be viewed using Adobe Reader or Adobe Acrobat Reader 5 0 or later available for free download from the Adobe website 1 Start the computer and insert the reference CD 2 Double click the CD Nikon D5200 icon in Computer or My Computer Windows or on the desktop Macintosh 3 Double click the INDEX pdf icon to display a language selection screen and clicka language to display the Reference Manual Camera Settings The explanations in this manual assume that default settings are used Digitutor Digitutor a series of watch and learn manuals in movie form is available from the following website http www nikondigitutor com index_eng html Nikon Manual Viewer 2 Install the Nikon Manual Viewer 2 app on your smartphone or table
39. a fall or other accident remove the battery and or AC adapter and then take the product to a Nikon authorized service center for inspection A Do not place the strap around the neck of an infant or child Placing the camera strap around the neck of an infant or child could result in strangulation A Do not remain in contact with the camera battery or charger for extended periods while the devices are on or in use Parts of the device become hot Leaving the device in direct contact with the skin for extended periods may result in low temperature burns A Do not aim a flash at the operator of a motor vehicle Failure to observe this precaution could result in accidents ZA Observe caution when using the flash e Using the camera with the flash in close contact with the skin or other objects could cause burns e Using the flash close to the subject s eyes could cause temporary visual impairment Particular care should be observed when photographing infants when the flash should be no less than one meter 39 in from the subject A Avoid contact with liquid crystal Should the monitor break care should be taken to avoid injury due to broken glass and to prevent the liquid crystal from the monitor touching the skin or entering the eyes or mouth A Observe proper precautions when handling batteries Batteries may leak or explode if improperly handled Observe the following precautions when handling batteries for use in this prod
40. a tripod is recommended when lighting is poor 59 EFFECTS 60 Pa Selective Color z A Silhouette High Key taa D sate 5 All colors other than the selected colors are recorded in black and white The effect can be chosen during live view M 63 The built in flash turns off use of a tripod is recommended when lighting is poor Silhouette subjects against bright backgrounds The built in flash turns off use of a tripod is recommended when lighting is poor Use with bright scenes to create bright images that seem filled with light The built in flash turns off Use with dark scenes to create dark somber images with prominent highlights The built in flash turns off use of a tripod is recommended when lighting iS poor Options Available in Live View BEES Color Sketch 1 Select live view Rotate the live view switch to raise the mirror and display the view through the lens in the monitor Live view switch 2 Adjust options Press k to display the options shown at right note that the options temporarily clear from the display during autofocus Press A or W to highlight Vividness or Outlines and press lt or gt to change Vividness can be increased to make colors more saturated or decreased for a washed out monochromatic effect while outlines can be made thicker or thinner Increasing the thickness of the lines also makes colors more saturated Press 8 to exit when sett
41. ack folder Playback display options menu T Image review E Rotate tall El Slide show DPOF print order 5 Highlight a menu item PLAYBACK MENU Delete Press A or W to highlight a menu item S Playback folder Playback display options Image review 0 N Lill Rotate tall ON Slide show m DPOF print order fell 6 Display options E Rotate tall Press to display options for the selected menu item 7 Highlight an option Press A or W to highlight an option Rotate tall I 8 Select the highlighted item z Press k to select the highlighted item To exit without making a selection press the MENU y button Note the following e Menu items that are displayed in gray are not currently available e While pressing gt generally has the same effect as pressing there are some cases in which selection can only be made by pressing 68 e To exit the menus and return to shooting mode press the shutter release button halfway 18 69 Be ViewNX 2 Installing ViewNX 2 Install the supplied software to display and edit photographs and movies that have been copied to your computer Before installing ViewNX 2 confirm that your computer meets the system Pon te requirements on page 71 The latest version of ViewNxX 2 is available for download from the Your Imaging Toolbo websites listed on page viii 1 Start the computer and insert the installer CD Windows Mac 0S Double click ic
42. ailure to observe this precaution could damage the flash EE Using the Built in Flash P A M and Modes 1 Raise the flash Press the 4 button to raise the flash 2 Choose a flash mode P S A and M modes only Q 37 3 Take pictures The flash will fire whenever a picture is taken Lowering the Built in Flash 4 button To save power when the flash is not in use press it gently downward until the latch clicks into place 36 Flash Mode The flash modes available vary with shooting mode G 2 2 0 4 B tf auto Auto Oo p AuTo Auto slowsync 4 Fillflash 4 AUTO Auto red eye reduction SLOW red eye reduction o Flahoff AUTO Autoslowsync Flash off P A S M 5 Afab 5 Fill flash Red eye reduction Red eye reduction Z Q s_LOW Slow sync red eye reduction REAR Rear curtain sync SLOW Slowsync 4BIOW Rear curtain slow sync REAR 1 Place the cursor in the information display If shooting information is not displayed in the monitor press the amp button Press the lt button again to place the cursor in the information display OFF OFF A AUTO 100 FISD AF A jm m 00l amp button Information display 2 Display flash mode options Highlight the current flash mode in the information display and press NORM OFF OFF tA AUTO 100 EISD AF A mi m 00 a 00 Flash mod GidBack 3 Choose a flash mode Flash mo
43. amera body See Also See Framing Photographs in the Monitor for information on framing photographs in the monitor M 45 The Information Display Camera settings can be viewed and adjusted in the information display Press the amp button once to view settings and again to make changes to settings Highlight items using the multi selector and press 8 to view options for the highlighted item oe ADL BKT out AUTO 5 sce a Shutter speed display 42 43 4 Bracketing indicator Be area AF indicator 32 3D tracking indicator 32 FOCUS POIN1 cseseseseseeeeeeees 33 IJ Eye Fi connection indicator GPS connection indicator IFJ Exposure delay mode KE Multiple exposure indicator KJ Print date indicator Flash control indicator Flash compensation indicator for optional flash units i a AEE EE TEN ku QUAL NORM ESD AF A ds BKT ADL ome zE 20 19 Shooting mode auto auto flash off 15 Scene MOdES eeeeeeees 19 P S A and M mode 42 Special effects mode 58 Aperture f number 42 43 Aperture display 42 43 Shutter speed uu 42 43 9 10 111213 14 GYS IDLY i DATERTILE S OFF ills EA AUTO 21 ia Auto ISO sensitivity indicator KJ ADL bracketing amount PA Number of exposures remaining sssssssesssesssessessssse 14 White balance recording indicator K appears
44. anty The use of third party rechargeable Li ion batteries not bearing the Nikon holographic seal shown at right could interfere with normal operation of the camera or result in the batteries overheating igniting rupturing or leaking For more information about Nikon brand accessories contact a local authorized Nikon dealer M Use Only Nikon Brand Accessories Only Nikon brand accessories certified by Nikon specifically for use with your Nikon digital camera are engineered and proven to operate within its operational and safety requirements THE USE OF NON NIKON ACCESSORIES COULD DAMAGE YOUR CAMERA AND MAY VOID YOUR NIKON WARRANTY M Servicing the Camera and Accessories The camera is a precision device and requires regular servicing Nikon recommends that the camera be inspected by the original retailer or a Nikon authorized service representative once every one to two years and that it be serviced once every three to five years note that fees apply to these services Frequent inspection and servicing are particularly recommended if the camera is used professionally Any accessories regularly used with the camera such as lenses or optional flash units should be included when the camera is inspected or serviced Before Taking Important Pictures Before taking pictures on important occasions such as at weddings or before taking the camera on a trip take a test shot to ensure that the camera is functioning normally Nikon will not be
45. ard in the setup menu and follow ASHIRA the on screen instructions to format the card M 66 Note tlt that this permanently deletes any data the card may contain Image Dust Off ref photo Be sure to copy any photographs and other data you wish to doo keep to a computer before proceeding 11 V Memory Cards e Memory cards may be hot after use Observe due caution when removing memory cards from the camera Turn the power off before inserting or removing memory cards Do not remove memory cards from the camera turn the camera off or remove or disconnect the power source during formatting or while data are being recorded deleted or copied to a computer Failure to observe these precautions could result in loss of data or in damage to the camera or card Do not touch the card terminals with your fingers or metal objects Do not bend drop or subject to strong physical shocks Do not apply force to the card casing Failure to observe this precaution could damage the card Do not expose to water heat high levels of humidity or direct sunlight Do not format memory cards in a computer Removing Memory Cards After confirming that the memory card access lamp is off turn the camera off open the memory card slot cover and press the card in to eject it The card can then be removed by hand The Write Protect Switch SD memory cards are equipped with a write protect switch to D prevent accidental loss of data
46. area Do not store your camera with naphtha or camphor moth balls or in locations that e are poorly ventilated or subject to humidities of over 60 e are next to equipment that produces strong electromagnetic fields such as televisions or radios e are exposed to temperatures above 50 C 122 F or below 10 C 14 F Cleaning Use a blower to remove dust and lint then wipe gently with a soft dry cloth After Camera using the camera at the beach or seaside wipe off sand or salt with a cloth lightly body dampened in distilled water and dry thoroughly Important Dust or other foreign matter inside the camera may cause damage not covered under warranty These glass elements are easily damaged Remove dust and lint with a blower If using an aerosol blower keep the can vertical to prevent the discharge of liquid To remove fingerprints and other stains apply a small amount of lens cleaner to a soft cloth and clean with care Remove dust and lint with a blower When removing fingerprints and other stains Monitor wipe the surface lightly with a soft cloth or chamois leather Do not apply pressure as this could result in damage or malfunction Lens mirror and viewfinder Do not use alcohol thinner or other volatile chemicals M Servicing the Camera and Accessories The camera is a precision device and requires regular servicing Nikon recommends that the camera be inspected by the original retailer or Nikon authorized serv
47. ay down to release the shutter and record the photograph The memory card access lamp will light and the photograph will be displayed in the monitor for a few seconds the photo will automatically clear from the display Memory card access when the shutter release button is pressed lamp halfway Do not eject the memory card or remove or disconnect the power source until the lamp has gone out and recording is complete Image Sensor Cleaning The camera vibrates the low pass filter covering the image sensor to remove dust when the camera is turned on or off 17 18 The Shutter Release Button The camera has a two stage shutter release button The camera focuses when the shutter release button is pressed halfway To take the photograph press the shutter release button the rest of the way down aN N AS Focus press halfway Shoot press all the way down The Standby Timer The viewfinder and information display will turn off if no operations are performed for about eight seconds reducing the drain on the battery Press the shutter release button halfway to reactivate the display The length of time before the standby timer expires automatically can be selected using Custom Setting c2 Auto off timers N 66 1S0 gt gt Exposure meters on Exposure meters off a Exposure meters on The Built in Flash If additional lighting is required for correct exposure in mode the built in flash will pop
48. be displayed 30 s before live view ends automatically 21 49 Depending on shooting conditions the timer may appear immediately when movie recording begins Note that regardless of the amount of recording time available live view will still end automatically when the timer expires Wait for the internal circuits to cool before resuming movie recording See Also For information on the indicators displayed in live view see page 49 For information on choosing focus and AF area modes see page 46 See page 52 for information on focusing in live view 56 Viewing Movies Movies are indicated by a icon in full frame playback M 24 Press to start playback MB icon Length Current position total length 15 04 2012 11 03 48 Movie progress bar Guide The following operations can be performed To Use Description Pause x gt Pause playback Pla Resume playback when movie is paused or during rewind y advance Speed increases with each press from 2x to 4x to 8x to 16x keep pressed to skip to beginning or end of movie first frame is Advance on is indicated by in top right corner of monitor last frame by W rewind If playback is paused movie rewinds or advances one frame at a time hold for continuous rewind or advance D Skip 10 s Rotate the command dial to skip ahead or back 10s Adjust volume amp amp amp Press amp to increase volume QE to decrease Edit movie To edit mov
49. controller available separately Remote cord MC DC2 available separately GPS unit GP 1 available separately Audio input Stereo mini pin jack 3 5mm diameter 87 88 Supported languages Supportedlanguages Arabic Chinese Simplified and Traditional Czech Danish Dutch English Finnish French German Greek Hindi Hungarian Indonesian Italian Japanese Korean Norwegian Polish Portuguese Portugal and Brazil Romanian Russian Spanish Swedish Thai Turkish Ukrainian Power source Battery One rechargeable Li ion EN EL14 battery AC adapter EH 5b AC adapter requires EP 5A power connector available separately Tripod socket Tripod socket 1 4 in ISO 1222 Dimensions weight Dimensions W x H x D Approx 129 0 x 98 0 x 78 0 mm 5 1 x 3 9 x 3 1 in Weight Approx 555 g 1 Ib 3 6 oz with battery and memory card but without body cap approx 505 g 1 Ib 1 8 oz camera body only Operating environment Temperature 0 C 40 C 32 F 104 F Humidity 85 or less no condensation e Unless otherwise stated all figures are for a camera with a fully charged battery operating at the temperature specified by the Camera and Imaging Products Association CIPA 23 3 C 73 4 5 4 F e Nikon reserves the right to change the specifications of the hardware and software described in this manual at any time and without prior notice Nikon will not be held liable for damages that may result from any mistak
50. cture Control indicator FYJ Auto ISO sensitivity indicator based on Monochrome is Exposure compensation 21 Warning indicator selected VMS ssania 44 k No memory card Flash compensation value TeX e 0 se 8 ISO sensitivity ssseseseevesssssen 39 BRA Focus indicator 16 ELJ K appears when memory Autoexposure AE lock remains for over 1000 k indicator EXPOSUTES scsserssssvscssesasnssecnes 14 BE Shutter speed esse 42 43 H Flash ready indicator 18 Note Display shown with all indicators lit for illustrative purposes The Viewfinder The response time and brightness of the viewfinder display may vary with temperature The Monitor The monitor can be angled and rotated as shown below Normal use Fold the monitor against the camera face out This position is recommended for normal photography Low angle shots Frame live view shots with the camera close to the ground High angle shots Frame live view shots while holding the camera over your head Self portraits Use for self portraits in live view The monitor shows a mirror image of what will appear in the final picture V Using the Monitor Rotate the monitor gently within the limits shown Do not use force Failure to observe these precautions could damage the connection between the monitor and the camera body To protect the monitor when the camera is not in use fold it back face down against the c
51. d at the sun Do not leave the lens pointed at the sun or other strong light source for an extended period Intense light may cause the image sensor to deteriorate or produce a white blur effect in photographs Turn the product off before removing or disconnecting the power source Do not unplug the product or remove the battery while the product is on or while images are being recorded or deleted Forcibly cutting power in these circumstances could result in loss of data or in damage to product memory or internal circuitry To prevent an accidental interruption of power avoid carrying the product from one location to another while the AC adapter is connected Cleaning When cleaning the camera body use a blower to gently remove dust and lint then wipe gently with a soft dry cloth After using the camera at the beach or seaside wipe off any sand or salt using a cloth lightly dampened in pure water and then dry the camera thoroughly The lens and mirror are easily damaged Dust and lint should be gently removed with a blower When using an aerosol blower keep the can vertical to prevent discharge of liquid To remove fingerprints and other stains from the lens apply a small amount of lens cleaner to a soft cloth and wipe the lens carefully See the Reference Manual for information on cleaning the low pass filter Do not touch the shutter curtain The shutter curtain is extremely thin and easily damaged Under no circumstances should you exer
52. d confirm that card is correctly flashes inserted Memory card is locked La Memory card is locked write protected Slide card Slide lock to write position write protect switch to write position e Use approved card e Format card If problem persists card may be damaged Contact Nikon authorized service representative This memory card cannot be used Card may be damaged Insert another card e Error creating new folder Delete files or insert new memory card e Insert new memory card This card is not formatted Far Format card or turn camera off and insert new memory Format the card flashes card m Reduce quality or size Card is full Futi e Delete photographs flashes e Insert new memory card Indicator Monitor Subject is too bright Subject is too dark No Bulb in S mode Interval timer shooting Error Press shutter release button again Start up error Contact a Nikon authorized service representative Metering error Unable to start live view Please wait for camera to cool Folder contains no images Cannot display this file Cannot select this file Viewfinder Solution Camera can not focus using autofocus Change flashes composition or focus manually flashes Use a lower ISO sensitivity Use commercial ND filter In mode S Increase shutter speed A Choose a smaller aperture higher f number Choose another shooting mode Use a hi
53. de Highlight a mode and press To return to Slow sync red eye shooting mode press the shutter release button ons halfway Fb Ee am OK 0 4 37 38 Flash Modes The flash modes listed on the previous page may combine one or more of the following settings as shown by the flash mode icon e AUTO auto flash When lighting is poor or subject is backlit flash pops up automatically when shutter release button is pressed halfway and fires as required e red eye reduction Use for portraits Red eye reduction lamp lights before flash fires reducing red eye e off Flash does not fire even when lighting is poor or subject is backlit e SLOW slow sync Shutter speed slows automatically to capture background lighting at night or under low light Use to include background lighting in portraits e REAR rear curtain sync Flash fires just before shutter closes creating a stream of light behind moving light sources below at right If this icon is not displayed flash will fire as the shutter opens front curtain sync the effect this produces with moving light sources is shown below at left Front curtain sync Choosing a Flash Mode The flash mode can also be selected by rotating the command dial while keeping the 4 button pressed in PS A M and ff modes raise the flash before using the Ei4 button to choose the flash mode s button Command dial Information display The Built
54. dynamic range HDR can not be used Interrupting Interval Timer Photography To interrupt interval timer shooting turn the camera off or rotate the mode dial to a new setting Returning the monitor to the storage position does not interrupt interval timer shooting 41 PS A and M Modes P S A and M modes offer different degrees of control over shutter speed and aperture Mode Description Camera sets shutter speed and aperture for optimal exposure 43 Recommended for snapshots and in other situations in which there is little time to adjust camera settings s Shutter priority auto User chooses shutter speed camera selects aperture for best m 43 results Use to freeze or blur motion Moarre n ie User chooses aperture camera selects shutter speed for best r p p y results Use to blur background or bring both foreground and m 43 background into focus User controls both shutter speed and aperture Shutter speeds of M Manual 43 Bulb and Time are available for long time exposures of fireworks or the night sky Programmed auto Shutter Speed and Aperture The same exposure can be achieved with different combinations of shutter speed and aperture Fast shutter speeds and large apertures freeze moving objects and soften background details while slow shutter speeds and small apertures blur moving objects and bring out background details Shutter speed Aperture uo Fast sh utter speed Slow
55. e device or transferring ownership to another person erase all data using commercial deletion software or format the device and then completely refill it with images containing no private information for example pictures of empty sky Be sure to also replace any pictures selected for preset manual Care should be taken to avoid injury when physically destroying data storage devices AVC Patent Portfolio License THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON COMMERCIAL USE OF A CONSUMER TO i ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD AVC VIDEO AND OR ii DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON COMMERCIAL ACTIVITY AND OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA L L C SEE http www mpegla com Vii Use Only Nikon Brand Electronic Accessories Nikon cameras are designed to the highest standards and include complex electronic circuitry Only Nikon brand electronic accessories including chargers batteries AC adapters and flash accessories certified by Nikon specifically for use with this Nikon digital camera are engineered and proven to operate within the operational and safety requirements of this electronic circuitry The use of non Nikon electronic accessories could damage the camera and may void your Nikon warr
56. ected settings will continue in effect and will apply to photographs taken using the viewfinder EFFECTS 64 Camera Menus Most shooting playback and setup options can be accessed from the camera menus To view the menus press the MENU button MENU button Tabs Choose from the following menus e gt Playback e c Retouch e Shooting e Recent settings or My Menu defaults e Custom Settings to Recent settings oY Setup SETUP MENU gt 4 Info display format j Auto info display Lock mirror up for cleaning Current settings are shown by icons __ mage Dust Off ref photo Video mode Menu options Options in current menu If a icon appears at the bottom left corner of the P Format memory card monitor a description of the currently selected option or a Format the memory card Allimages and other data on the card menu can be displayed by pressing the amp button z will be deleted Press amp or W to scroll through the display Press SS again to return to the menus Q1 button 65 Menu Options BB L gt Playback Menu Managing Images Delete Playback folder Playback display options Image review Rotate tall Slide show BE Shooting Menu Shooting Options Reset shooting menu Storage folder Image quality Image size White balance Set Picture Control Manage Picture Control Auto distortion control Color space Active D Lighting
57. elow at left making sure the plug is fully inserted Insert the battery and plug the charger in An exhausted battery will fully charge in about 1 hour and 30 minutes Battery charging Charging complete 3 Insert the battery Insert the battery in the orientation shown using the battery to keep the orange battery latch pressed to one side The latch locks the battery in place when the battery is fully inserted Battery latch 4 insert a memory card available separately Check to be sure the card is in the correct orientation and then slide the card until it clicks into place 5 Attach a lens Be careful to prevent dust from entering the camera when the lens or body cap is removed Mounting mark lens indicated by white dot Keeping marks white dots aligned position lens on camera Mounting mark akai then rotate until lens clicks into place camera Mounting mark lens Autofocus is available with AF S lenses When using autofocus with a lens equipped with an A M mode switch slide the switch to A if the lens has an M A M switch select M A for autofocus with manual override For information on other lenses that can be used with the D5200 see page 74 If the lens has a vibration reduction VR switch select ON to reduce the effects of vibration 6 Open the moni
58. ens aperture ring CPU contacts Aperture ring wpe 4 y t se g u oF bos g 11 9b 22 CPU lens a Type G lens Type D lens 75 Other Accessories At the time of writing the following accessories were available for the D5200 e Rechargeable Li ion Battery EN EL14 1 7 Additional EN EL14 batteries are available from local retailers and Nikon authorized service representatives EN EL14a batteries can also be used Power e Battery Charger MH 24 M 7 Recharge EN EL14a and EN EL14 batteries sources e Power Connector EP 5A AC Adapter EH 5b These accessories can be used to power the camera for extended periods EH 5a and EH 5 AC adapters can also be used A power connector EP 5A is required to connect the camera to the EH 5b EH 5a or EH 5 e Filters intended for special effects photography may interfere with autofocus or the electronic rangefinder e The D5200 can not be used with linear polarizing filters Use C PL or C PL Il circular polarizing filters instead e NC filters are recommended for protecting the lens e To prevent ghosting use of a filter is not recommended when the subject is framed against a bright light or when a bright light source is in the frame e Center weighted metering is recommended with filters with exposure factors filter factors over 1 x Y44 Y48 Y52 056 R60 XO X1 C PL ND2S ND4 ND4S ND8 ND8S ND400 A2 A12 B2 B8 B12 See the filter manual for details e DK 2
59. er of times Press lt or P to highlight number of P o intervals i e the number of times the OP camera shoots press A or W to change OUa Press to continue p eae 5 Start shooting renal ner sootng Highlight On and press to return to the a o shooting menu without starting the interval timer highlight Off and press The first Toe 003 series of shots will be taken at the specified starting time or after about 3 s if Now was selected for Choose start time in Step 2 Shooting will continue at the selected interval until all shots have been taken Note that because shutter speed and the time needed to record the image to the memory card may vary from shot to shot intervals may be skipped if the camera is still in the process of recording the previous interval If shooting can not proceed at current settings for example if a shutter speed of Bulb is currently selected in shooting mode M or the start time is in less than a minute a warning will be displayed in the monitor Cover the Viewfinder To prevent light entering via the viewfinder interfering with exposure remove the rubber eyecup and cover the viewfinder with the supplied DK 5 eyepiece cap I 29 Other Settings Settings can not be adjusted during interval timer photography Regardless of the release mode selected the camera takes one photograph at each interval in mode 8 camera noise will be reduced Bracketing multiple exposure and high
60. es that this manual may contain EE MH 24 battery charger Rated input AC 100 240 V 50 60 Hz 0 2 A maximum Rated output DC 8 4 V 0 9 A Supported batteries Nikon Rechargeable Li ion Battery EN EL14 Charging time Approx 1 hour and 30 minutes at an ambient temperature of 25 C 77 F when no charge remains Operating temperature O C 40 C 32 F 104 F Dimensions W x H x D Approx 70 x 26 x 97 mm 2 8 x 1 0 x 3 8 in excluding plug adapter Weight Approx 89 g 3 1 oz excluding plug adapter EE EN EL14 rechargeable Li ion battery Type Rechargeable lithium ion battery Rated capacity 7 4V 1030 mAh Operating temperature O C 40 C 32 F 104 F Dimensions W x Hx D Approx 38 x 53 x 14mm 1 5 x 2 1 x 0 6 in Weight Approx 48 g 1 7 oz excluding terminal cover EE AF S DX NIKKOR 18 55mm 3 5 5 6G VR II lens Type Type G AF S DX lens with built in CPU and F mount Focal length 18 55 mm Maximum aperture f 3 5 5 6 Lens construction 11 elements in 8 groups including 1 aspherical lens element Angle of view 76 28 50 Focal length scale Graduated in millimeters 18 24 35 45 55 Distance information Output to camera Zoom Manual zoom using independent zoom ring Focusing Autofocus controlled by Silent Wave Motor and separate focus ring for manual focus Vibration reduction Lens shift using voice coil motors VCMs Minimum focus distance AF 0 28 m 0 92 ft from focal plane at all zoom positi
61. fe Using the monitor Keeping the shutter release button pressed halfway Repeated autofocus operations Taking NEF RAW photographs Slow shutter speeds Using a GP 1 GPS unit Using a WU 1a wireless mobile adapter Using VR vibration reduction mode with VR lenses To ensure that you get the most from rechargeable Nikon EN EL14 batteries e Keep the battery contacts clean Soiled contacts can reduce battery performance e Use batteries immediately after charging Batteries will lose their charge if left unused 91 92 No reproduction in any form of this manual in whole or in part except for brief quotation in critical articles or reviews may be made without written authorization from NIKON CORPORATION NIKON CORPORATION Printed in Singapore SB3K01 11 2012 Nikon Corporation 6MB23611 01
62. focused into the camera when the sun is in or close to the frame could cause a fire A Do not look at the sun through the viewfinder Viewing the sun or other strong light source through the viewfinder could cause permanent visual impairment A Using the viewfinder diopter adjustment control When operating the viewfinder diopter adjustment control with your eye to the viewfinder care should be taken not to put your finger in your eye accidentally A Turn off immediately in the event of malfunction Should you notice smoke or an unusual smell coming from the equipment or AC adapter available separately unplug the AC adapter and remove the battery immediately taking care to avoid burns Continued operation could result in injury After removing the battery take the equipment to a Nikon authorized service center for inspection Z Do not use in the presence of flammable gas Do not use electronic equipment in the presence of flammable gas as this could result in explosion or fire ZA Keep out of reach of children Failure to observe this precaution could result in injury In addition note that small parts constitute a choking hazard Should a child swallow any part of this equipment consult a physician immediately A Do not disassemble Touching the product s internal parts could result in injury Inthe event of malfunction the product should be repaired only by a qualified technician Should the product break open as the result of
63. footage at 1080 60i and 1080 50i 1 Measured at 23 C 73 4 F 3 C 5 4 F with an AF S DX NIKKOR 18 55mm f 3 5 5 6G VR II lens under the following test conditions lens cycled from infinity to minimum range and one photograph taken at default settings once every 30 s after photograph is taken monitor is turned on for 4 s tester waits for standby timer to expire after monitor is turned off flash fired at full power once every other shot Live view not used Measured at 20 C 68 F with an AF S DX NIKKOR 18 55mm f 3 5 5 6G VR II lens under the following test conditions vibration reduction off continuous high speed release mode focus mode set to AF C image quality set to JPEG basic image size set toM medium white balance set to AUTO ISO sensitivity set to ISO 100 shutter speed 1 250 s focus cycled from infinity to minimum range three times after shutter release button has been pressed halfway for 3 s six shots are then taken in succession and monitor turned on for 4 s and then turned off cycle repeated once standby timer has expired Measured at 23 C 73 4 F 3 C 5 4 F with the camera at default settings and an AF S DX NIKKOR 18 55mm f 3 5 5 6G VR II lens under conditions specified by the Camera and Imaging Products Association CIPA Individual movies can be up to 20 minutes in length or 4 GB in size recording may end before these limits are reached if the camera temperature rises The following can reduce battery li
64. g via the viewfinder from interfering with exposure remove the rubber eyecup and cover the viewfinder with the supplied DK 5 eyepiece cap before shooting M 29 Although they will not appear in the final picture distortion may be visible in the monitor if the camera is panned horizontally or an object moves at high speed through frame Bright light sources may leave after images in the monitor when the camera is panned Bright spots may also appear Flicker and banding visible in the monitor under fluorescent mercury vapor or sodium lamps can be reduced using Flicker reduction M 66 although they may still be visible in the final photograph at some shutter speeds When shooting in live view mode avoid pointing the camera at the sun or other strong light sources Failure to observe this precaution could result in damage to the camera s internal circuitry Live view ends automatically if the lens is removed or when the monitor is closed closing the monitor does not end live view on televisions or other external displays Live view may end automatically to prevent damage to the camera s internal circuits exit live view when the camera is not in use Note that the temperature of the camera s internal circuits may rise and noise bright spots randomly spaced bright pixels or fog may be displayed in the following instances the camera may also become noticeably warm but this does not indicate a malfunction e The ambient temperature is
65. ge or malfunction Dust or lint on the monitor can be removed with a blower Stains can be removed by wiping lightly with a soft cloth or chamois leather Should the monitor break care should be taken to avoid injury from broken glass and to prevent liquid crystal from the monitor touching the skin or entering the eyes and mouth Moir Moir is an interference pattern created by the interaction of an image containing a regular repeating grid such as the pattern of weave in cloth or windows in a building with the camera image sensor grid If you notice moir in your photographs try changing the distance to the subject zooming in and out or changing the angle between the subject and the camera Caring for the Battery Batteries may leak or explode if improperly handled Observe the following precautions when handling batteries e Use only batteries approved for use in this equipment e Do not expose the battery to flame or excessive heat e Keep the battery terminals clean e Turn the product off before replacing the battery e Remove the battery from the camera or charger when not in use and replace the terminal cover These devices draw minute amounts of charge even when off and could draw the battery down to the point that it will no longer function If the battery will not be used for some time insert it in the camera and run it flat before removing it and storing it in a location with an ambient temperature of 15 C to 25 C 5
66. gher ISO sensitivity Use flash In mode S Lower shutter speed A Choose a larger aperture lower f number Change shutter speed or select mode M Menus and playback are not available while interval timer photography is in progress Turn camera off Flash has fired at full power Check photo in monitor if flashes underexposed adjust settings and try again 4 0 flashes Doe aD flashes e Use the flash e Change distance to subject aperture flash range or ISO sensitivity Lens focal length is less than 18 mm use a longer focal length Optional SB 400 flash unit attached flash is in bounce position or focus distance is very short Continue shooting if necessary increase focus distance to prevent shadows from appearing in photograph Release shutter If error persists or appears frequently consult Nikon authorized service representative Consult Nikon authorized service representative Wait for the internal circuits to cool before resuming live 4 view or movie recording Folder selected for playback contains no images Insert another memory card or select a different folder File can not be played back on camera Images created with other devices can not be retouched 83 Specifications BE Nikon D5200 Digital Camera Type Type Single lens reflex digital camera Lens mount Nikon F mount with AF contacts Nikon DX format focal length equivalent to approx 1 5x that
67. held liable for damages or lost profits that may result from product malfunction Life Long Learning As part of Nikon s Life Long Learning commitment to ongoing product support and education continually updated information is available on line at the following sites e For users in the U S A http www nikonusa com e For users in Europe and Africa http www europe nikon com support e For users in Asia Oceania and the Middle East http w ww nikon asia com Visit these sites to keep up to date with the latest product information tips answers to frequently asked questions FAQs and general advice on digital imaging and photography Additional information may be available from the Nikon representative in your area See the following URL for contact information http imaging nikon com viii Introduction Getting to Know the Camera Take a few moments to familiarize yourself with camera controls and displays You may find it helpful to bookmark this section and refer to it as you read through the rest of the manual The Camera Body BE Mode dial siscistsiiienansashions 3 Live view switch LIVE VIEW uu e eeseccesssseseeceseeees 45 MOViE sscstasecscssaovszesasatecesecacaee 53 4 Ei information button 50 78 T A button Release Mode uuu eee 26 Self tiMEL oo eee eeeeeeeeeeee 28 Remote control 28 Eyelets for camera Strap 7 i4 button Exposure compensation 44 Ad
68. help CAUTIONS Modifications The FCC requires the user be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corporation may void the user s authority to operate the equipment Interface Cables Use the interface cables sold or provided by Nikon for your equipment Using other interface cables may exceed the limits of Class B Part 15 of the FCC rules Notice for Customers in the State of California WARNING Handling the cord on this product may expose you to lead a chemical known to the State of California to cause birth defects or other reproductive harm Wash hands after handling Nikon Inc 1300 Walt Whitman Road Melville New York 11747 3064 U S A Tel 631 547 4200 Notice Concerning Prohibition of Copying or Reproduction Note that simply being in possession of material that has been digitally copied or reproduced by means of a scanner digital camera or other device may be punishable by law e Items prohibited by law from being copied or reproduced e Cautions on certain copies and reproductions Do not copy or reproduce paper money coins securities government bonds or local government bonds even if such copies or reproductions are The government has issued cautions on copies or reproductions of securities issued by private companies shares bills checks gift certificates etc commuter passes or coupon tickets except when a minimum of necessary
69. hotographs are being saved to the memory card Up to 100 photographs can be taken in succession note however that frame rate will drop when the buffer is full While photographs are being recorded to the memory card the memory card access lamp will light M 17 Depending on the battery level and the number of the images in the buffer recording may take from a few seconds to a few minutes Do not remove the memory card or remove or disconnect the power source until the access lamp has gone out If the camera is switched off while data remain in the buffer the power will not turn off until all images in the buffer have been recorded If the battery is exhausted while images remain in the buffer the shutter release will be disabled and the images transferred to the memory card Continuous Release Modes Continuous release modes can not be used with the built in flash rotate the mode dial to 0 15 or turn the flash off 41 36 38 Buffer Size The approximate number of images that can be stored in the 25 55 Ca memory buffer at current settings is shown in the viewfinder exposure count display while the shutter release button is pressed The illustration shows the display when space remains in the buffer for about 17 pictures 27 28 Self Timer and Remote Control Modes The self timer and optional ML L3 remote control Q 77 allow the photographer to be at a distance from the camera when a photo is taken Mount the camera o
70. iature effect V 67 and Selective color M 67 options in the retouch menu can be used to apply these effects to existing pictures Night Vision Use under conditions of darkness to record monochrome images at high ISO sensitivities with some noise in the form of randomly spaced bright pixels fog or lines Autofocus is available in live view only manual focus can be used if the camera is unable to focus The built in flash and AF assist illuminator turn off use of a tripod is recommended to reduce blur ES Color Sketch The camera detects and colors outlines for a color sketch effect Movies shot in this mode play back like a slide show made up of a series of stills The effect can be chosen during live view M 61 note that the display refresh rate drops when live view is in effect and that the frame rate drops in continuous release modes Autofocus is not available during movie recording Distant subjects appear as miniatures Miniature effect movies play back at high speed compressing 30 to 45 minutes of footage shot at 1920 x 1080 30p into a movie that plays back in about three minutes The effect can be chosen during live view M 62 note that the display refresh rate drops when live view is in effect and that the frame rate drops in continuous release modes Sound is not recorded with movies autofocus is not available during movie recording The built in flash and AF assist illuminator turn off use of
71. ice representative once every one to two years and that it be serviced once every three to five years note that fees apply to these services Frequent inspection and servicing are particularly recommended if the camera is used professionally Any accessories regularly used with the camera such as lenses or optional flash units should be included when the camera is inspected or serviced 78 Caring for the Camera and Battery Cautions Caring for the Camera Do not drop The product may malfunction if subjected to strong shocks or vibration Keep dry This product is not waterproof and may malfunction if immersed in water or exposed to high levels of humidity Rusting of the internal mechanism can cause irreparable damage Avoid sudden changes in temperature Sudden changes in temperature such as those that occur when entering or leaving a heated building on a cold day can cause condensation inside the device To prevent condensation place the device in a carrying case or plastic bag before exposing it to sudden changes in temperature Keep away from strong magnetic fields Do not use or store this device in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the monitor damage data stored on the memory card or affect the product s internal circuitry Do not leave the lens pointe
72. ie press t O n while movie is paused Return to full frame playback VO Press A or P to exit to full frame playback AA Exit to shooting mode Press shutter release button halfway Monitor will turn off photographs can be taken immediately The Icon Nl is displayed in full frame and movie playback if the movie was recorded without sound 60i 15 04 2012 11 03 48 1920x1080 57 EFFECTS 58 Special Effects Special effects can be used when recording images Shooting with Special Effects The following effects can be selected by rotating the mode dial to EFFECTS and rotating the command dial until the desired option appears in the monitor RIERS E I O PAT So lt F E Ae ya Awa x Color sketch m EFFECTS oom N Mode dial Command dial Monitor NEF RAW If NEF RAW JPEG is selected for image quality in 44 5 or mode only the JPEG images will be recorded M 34 If NEF RAW is selected fine quality JPEG photographs will be recorded instead of NEF RAW images Continuous Release Modes When amp or t is selected the frame rate for continuous release will drop If the memory buffer fills the camera will display a message indicating that recording is in progress and shooting will be suspended until the message clears from the display The Retouch Menu The Color sketch 1 67 Min
73. ime zone and date options in LL 66 Select daylight saving Set time and date PE SERU ERE GG time option note that the camera uses a 24 hour clock 9 Focus the viewfinder TA After removing the lens cap rotate the diopter K adjustment control until the AF area brackets are e in sharp focus When operating the control with your eye to the viewfinder be careful not to put your fingers or fingernails in your eye AF area brackets Adjusting Viewfinder Focus If you are unable to focus the viewfinder as described above select single servo autofocus AF S Q 30 single point AF C2 A 32 and the center focus point and then frame a high contrast subject in the center focus point and press the shutter release button halfway to focus the camera With the camera in focus use the diopter adjustment control to bring the subject into clear focus in the viewfinder If necessary viewfinder focus can be further adjusted using optional corrective lenses 10 Y During Charging Do not move the charger or touch the battery during charging Failure to observe this precaution could in very rare instances result in the charger showing that charging is complete when the battery is only partially charged Remove and reinsert the battery to begin charging again M Charging the Battery Read and follow the warnings and cautions on pages iv v and 79 81 of this manual Charge the battery indoors at ambient temperatures of 5 C 35
74. ime are registered trademarks of Apple Inc in the United States and or other countries Microsoft Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and or other countries PictBridge logo is a trademark The SD SDHC and SDXC logos are trademarks of the SD 3C LLC HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC Homi All other trade names mentioned in this manual or the other documentation provided with your Nikon product are trademarks or registered trademarks of their respective holders FreeType License FreeType2 Portions of this software are copyright 2012 The FreeType Project http www freetype org All rights reserved MIT License HarfBuzz Portions of this software are copyright 2012 The HarfBuzz Project http www freedesktop org wiki Software HarfBuzz All rights reserved Battery Life The movie footage or number of shots that can be recorded with fully charged batteries varies with the condition of the battery temperature the interval between shots and the length of time menus are displayed Sample figures for EN EL14 1030 mAh batteries are given below e Photographs single frame release mode CIPA standard Approximately 500 shots e Photographs continuous release mode Nikon standard 2 Approximately 1700 shots e Movies Approximately 40 minutes of HD
75. in Flash For information on the lenses that can be used with the built in flash see the Reference Manual Remove lens hoods to prevent shadows The flash has a minimum range of 0 6 m 2 ft and can not be used in the macro range of zoom lenses with a macro function The shutter release may be briefly disabled to protect the flash after it has been used for several consecutive shots The flash can be used again after a short pause Shutter Speeds Available with the Built in Flash Shutter speed is restricted to the following ranges when the built in flash is used Shutter speed Mode Shutter speed 1 200 1 60 S S 200 30 s 200 125 S M 200 30 s Bulb 200 1 S Shutter speeds as slow as 30 s are available in slow sync rear curtain slow sync and slow sync red eye reduction modes ISO Sensitivity ISO sensitivity is the digital equivalent of film speed The higher the ISO sensitivity the less light needed to make an exposure allowing higher shutter speeds or smaller apertures but the more likely the image is to be affected by noise randomly spaced bright pixels fog or lines noise is particularly likely at settings between Hi 0 3 equivalent to ISO 8000 and Hi 2 equivalent to ISO 25600 Choosing Auto allows the camera to set ISO sensitivity automatically in response to lighting conditions Other shooting modes 1 Mode ISO sensitivity a O Auto P S A M 100 6400 in steps of 1 3 EV Hi 0 3
76. inated by regular geometric patterns e g blinds or a row of windows in a skyscraper The subject is moving Note that the focus point may sometimes be displayed in green when the camera is unable to focus 52 Recording and Viewing Movies Recording Movies Movies can be recorded in live view mode 1 Rotate the live view switch The mirror is raised and the view through the lens is displayed in the monitor instead of the viewfinder A The 0 Icon A icon M 49 indicates that movies can not be recorded Live view switch Before Recording Set aperture before recording in mode A or M 2 Focus Frame the opening shot and focus as described in Steps 2 and 3 of Framing Photographs in the Monitor M 45 see also Focusing in Live View on pages M 46 48 Note that the number of subjects that can be detected in face priority AF drops during movie recording 3 Start recording Press the movie record button to start recording A ZA recording indicator and the time available are displayed in aw the monitor Except in amp and modes exposure can be 0 locked by pressing the ft O n button or in modes P S A and HA altered by up to 3 EV in steps of 3 EV by pressing Movie record button the 4 button and rotating the command dial note that depending on the brightness of the subject changes to exposure may have no visible effect Recording indicator CoD V125 F5 6 100
77. ings are complete To exit live view rotate the live view switch The selected settings will continue in effect and will apply to photographs taken using the viewfinder Vividness SPT OK IDIO 125 F5 6 0100 1 0 k EFFECTS 61 BE Miniature Effect 1 Select live view Rotate the live view switch to raise the mirror and display the view through the lens in the monitor 2 Position the focus point Use the multi selector to position the focus point in the area that will be in focus and then press the shutter release button halfway to focus note that the options temporarily clear from the ee display during autofocus To temporarily clear miniature effect options from the display and enlarge the view in the monitor for precise focus press amp Press Q1 to restore the miniature effect display 1125 F5 6 3 Display options Press to display miniature effect options 125 F5 6 4 Adjust options Press lt or P to choose the orientation of the area that will be in focus and press A or W to adjust its width 5 Return to the live view display Press to return to live view To exit live view rotate the live view switch The selected settings will continue in effect and will apply to photographs taken using the viewfinder 62 EE Z Selective Color 1 Select live view Rotate the live view switch to raise the mirror and display the view through the len
78. justing aperture 43 Flash compensation Shutter release button 16 18 JEJ Power SWit ha ssssssssessseesee 2 BE Movie record button 53 Infrared receiver for ML L3 remote control front 28 AF assist illuminator Self timer laMp ccseeeee 28 Red eye reduction lamp 38 KF Body cap KEJ CPU contacts Built in flash o seessssescssseeesseee 36 15 E el scx ccassncceamieenenvce 2 KJ Focal plane mark WA button Flash Mode 37 38 Flash compensation Connector cover Fn button Using the Fn button 28 21 Lens release button 13 22 Mirror 23 LENS MOUNt ssseeeeseen 8 Accessory shoe cover Accessory shoe for optional z flash units FJ Stereo microphone 2 55 7 Connector for external E microphone USB and A V connector Connecting to a COMPUTED ceseseceeeeeeees 72 2 HDMI mini pin connector EX Accessory terminal 77 E Viewfinder eyepiece 4 29 JF Rubber eye cup w csesesaseesnsen 29 MENU button k MenUsS sescsvesssesesavedvavedesbvavecses 65 LS Infrared receiver for ML L3 k remote control rear 28 Monitor Viewing SettingS e 6 LIVE VIEW ue eeseccsssssseseseeeees 45 Full frame playback 24 IJ Tripod socket 4 Diopter adjustment l COMUNOl oessseesssessesesesseessesseseee 10 7 89 10 Ws y LEN 49 TRIN av N Com IN a AAE ii1 O n button F amp butt
79. l EP 5A power connector and EH 5b AC adapter M 76 Three days of charging will power the clock for about a month Ifa message warning that the clock is not set is displayed when the camera is turned on the clock battery is exhausted and the clock has been reset Set the clock to the correct time and date 13 mad 14 Basic Photography Battery Level and Card Capacity E Before shooting check the battery level and number of exposures remaining 1 Turn the camera on 2 Check the battery level Check the battery level in the information display if the battery is low a warning will also be displayed in the viewfinder If the monitor is off press the amp button to view the information display if the monitor does not turn on the battery is exhausted and must be recharged Information display Description TT Battery fully charged Cm _ Battery partially discharged Low battery Ready fully charged spare battery or CE prepare to charge battery CE C Battery exhausted shutter release disabled Charge or flashes flashes exchange battery 3 Check the number of exposures remaining The information display and viewfinder show the number of photographs that can be taken at current settings values over 1000 are rounded down to the nearest hundred e g values between 1200 and 1299 are shown as 1 2 K Ifa warning is displayed stating that there is not enough memory for additional photographs
80. l the shutter release button is pressed halfway The camera will then return to live view mode To exit rotate the live view switch 45 Focusing in Live View Follow the steps below to choose focus and AF area modes and position the focus point EE Choosing a Focus Mode The following focus modes are available in live view note that full time servo AF is not available in amp and modes Option Description For stationary subjects Focus locks when shutter release button is pressed halfway For moving subjects Camera focuses continuously until shutter AF F Full time servo AF release button is pressed Focus locks when shutter release button is pressed halfway MF Manual focus Focus using the lens focus ring AF S Single servo AF 1 Place the cursor in the information display Press the amp button to place the cursor in the information display RSS SRR AEE RRRRRRR RR S Image quality ut OFF OFF SA AUTO 100 ESD AF S hd m 00 a 00 GBack MBOK r F al m C one S 2 G 125 F5 6 100 1 0k qW button 2 Display focus options Highlight the current focus mode in the information display and press W ree NORM 2 OFF OFF iA AUTO 100 Fs oe B m 00a 00 3 GJBack MOK a a 7125 F5 6 10100 1 0 k 3 Choose a focus option Highlight an option and press To return to live roni moe Full time servo AF view press lt B AES ea
81. ler can not be attached at the same time as a WU 1a wireless mobile adapter or ME 1 stereo microphone Attempting to forcibly attach accessories can damage the camera or accessory Approved Memory Cards The following SD memory cards have been tested and approved for use in the D5200 Cards with class 6 or faster write speeds are recommended for movie recording Recording may end unexpectedly when cards with slower write speeds are used SD memory cards SDHC memory cards 2 SDXC memory cards 3 SanDisk 4 GB 8 GB 16 GB 32 GB 64 GB Toshiba Panasonic 2 GB 4 GB 6 GB 8 GB 12 GB 16 GB 24 GB 32 GB 48 GB 64 GB Lexar Media 4 GB 8 GB 16 GB 32 GB 64 GB 128 GB Full HD Video a 4 GB 8 GB 16 GB 1 Check that any card readers or other devices with which the card will be used support 2 GB cards 2 Check that any card readers or other devices with which the card will be used are SDHC compliant The camera supports UHS 1 3 Check that any card readers or other devices with which the card will be used are es Pe SDXC compliant The camera supports UHS 1 DP DP XC XC I Other cards have not been tested For more details on the above cards please contact the manufacturer 77 Caring for the Camera Storage When the camera will not be used for an extended period remove the battery and store it in a cool dry area with the terminal cover in place To prevent mold or mildew store the camera in a dry well ventilated
82. mpatible CPU Lenses ssssrescdsnannitaninone dn 74 CB FCC Ss ON SS ciso T EA 76 Approved Memory Cards sovesiisssescscssncestccnvsnsetesessavassdoascaceisacvencrseseanwisnersonvaresabeniosesmscipeeauney 77 Canino TOP the Carnet derisine anaana EE aE EE EEEE 78 SLE 3 ANERE T EAE AE A T E A EE A EEA A EA er A A 78 O a A EE E era tees 78 Caring for the Camera and Battery Cautions sssessssesssssessssessssesssscessseessseresseressseessseessseesss 79 Caring for the CAMELA sssesssssssessssecsssscsecssscsessssecsesscsecscsecsssncsessssucassscseeassucsesncsecsssncseenees 79 Caring for the Battery ccesssssssssssscssssssecsssecsssssscssssssecsssscsesssscsesucsessssecassscseesssucsesesseenees 80 EOT MICSE IIE icc cece E E E E 82 P N a aa eucscsccsesagtadctvs tuscan nee devaceetaceeedisteaseentinas tence eanes 84 For Your Safety To prevent damage to your Nikon product or injury to yourself or to others read the following safety precautions in their entirety before using this equipment Keep these safety instructions where all those who use the product will read them The consequences that could result from failure to observe the precautions listed in this section are indicated by the following symbol A This icon marks warnings To prevent possible injury read all warnings before using this Nikon product HE WARNINGS A Keep the sun out of the frame Keep the sun well out of the frame when shooting backlit subjects Sunlight
83. n Lens aperture Instant return electronically controlled 84 Lens Compatible lenses Shutter Type Speed Flash sync speed Autofocus is available with AF S and AF I lenses Autofocus is not available with other type G and D lenses AF lenses IX NIKKOR and lenses for the F3AF are not supported and AI P lenses Non CPU lenses can be used in mode M but the camera exposure meter will not function The electronic rangefinder can be used with lenses that have a maximum aperture of f 5 6 or faster Electronically controlled vertical travel focal plane shutter 1 4000 30 s in steps of 1 3 or 1 2 EV Bulb Time requires optional ML L3 remote control X 200 s synchronizes with shutter at 200 s or slower Release Release mode Frame advance rate Self timer S single frame L continuous L 24H continuous H self timer 2s delayed remote ML L3 quick response remote ML L3 8 quiet shutter release interval timer photography supported Up to 3 fps L or 5 fps H continuous servo AF with Release selected for Custom Settings a1 AF C priority selection manual or shutter priority auto exposure a shutter speed of 250s or faster and the remaining settings at default value 25 55 10 s 20s 1 9 exposures Exposure TTL exposure metering using 2016 pixel RGB sensor Metering mode Metering method Range ISO 100 f 1 4 lens 20 C 68 F Exposure meter coupling
84. n Resize Perspective control Tim Quikretouh Miniatureeffect Monochrome Straighten Selective color Filter effects Distortioncontrol Edit movie Color balance Fisheye Image overlay Coloroutline EE Recent Settings My Menu Defaults to Recent Settings The recent settings menu lists the twenty most recently used settings For More Information Information on individual menu options is available using the camera s on board help 4 65 67 Using Camera Menus The multi selector and button are used to navigate the camera menus Move cursor up button select highlighted item Cancel and return to sete highlighted item or previous menu Q display sub menu Move cursor down Follow the steps below to navigate the menus 1 Display the menus Press the MENU button to display the menus MENU button 2 Highlight the icon for the current menu SLET ormat memory car Press lt to highlight the icon for the current Monitor brightness o display format menu uto info display I Clean image sensor Block mirror up for cleaning Image Dust Off ref photo Video mode PLAYBACK MENU 3 Select a menu a Press A or W to select the desired menu Playback folder Playback display options Image review Rotate tall Slide show DPOF print order 68 4 Position the cursor in the selected menu PLAYBACK MENU e Delete Press to position the cursor in the selected Playb
85. n halfway to focus The active focus point will be displayed If the subject is poorly lit the flash may pop up and the AF assist illuminator may light 6 Check the indicators in the viewfinder When the focus operation is complete a beep will sound a beep may not sound if the subject is moving and the in focus indicator will appear in the viewfinder In focus indicator Description Subject in focus flashes Camera unable to focus using autofocus See page 31 While the shutter release button is pressed halfway the number of exposures that can be stored in the memory buffer Q 27 will be displayed in the viewfinder Using a Zoom Lens Use the zoom ring to zoom in on the subject so that it fills a larger area of the frame or zoom out to increase the area visible in the final photograph select longer focal lengths on the lens focal length scale to zoom in shorter focal lengths to zoom out If the lens is equipped with a retractable lens barrel button M 9 press and hold the button while rotating the zoom ring until the lens is released and the message shown at right is no longer displayed and then adjust zoom using the zoom ring lt ii Focus point In focus Buffer indicator capacity Zoom in Ow oom ring Zoom out Before taking photos rotate the zoom ring to extend the lens 7 Shoot Smoothly press the shutter release button the rest of the w
86. na tripod Mount the camera on a tripod or place the camera on a stable level surface 2 Select a release mode Select Self timer 2s Delayed remote ae ML L3 or 6 Quick response remote i ings em ML L3 mode M 26 note that if no ee operations are performed for about a minute after a remote control mode is J 8 6 button selected the camera will automatically return to single frame continuous or quiet shutter release mode Ft e Taaum MAOK 3 Frame the photograph Remote control mode Check focus by pressing the shutter release button halfway No photograph will be taken even if the button is pressed all the way down 4 Take the photograph Self timer mode Press the shutter release button halfway to focus and then press the button the cael rest of the way down The self timer lamp will a J V start to flash and a beep will begin to sound Two seconds before the photo is taken the lamp will stop flashing and the beeping will become more rapid The shutter will be released ten seconds after the timer starts Remote control mode From a distance of 5 m 16 ft or less aim the transmitter on the ML L3 at either of the infrared receivers on the camera M 1 2 and press the ML L3 shutter release button In delayed remote mode the self timer lamp will light for about two seconds before the shutter is released In quick response remote mode the self timer lamp will flash after the
87. ng ViewNX 2 Manually e Windows Double click the ViewNX 2 shortcut on the desktop e Mac OS Click the ViewNX 2 icon in the Dock EE Retouching Photographs To crop pictures and perform such tasks as adjusting sharpness and tone levels click the Edit button in the ViewNX 2 toolbar m o Edit Browser GeoTa ranstq EE Editing Movies To perform such tasks as trimming unwanted footage from movies shot with the camera click the Movie Editor button in the ViewNxX 2 toolbar EE Printing Pictures Click the Print button in the ViewNX 2 toolbar A dialog will be displayed allowing you to print pictures on a printer connected to the computer ee ee For More Information Consult online help for more information on using ViewNX 2 73 Technical Notes Read this chapter for information on compatible accessories cleaning and storing the camera and what to do if an error message is displayed or you encounter problems using the camera Compatible Lenses Compatible CPU Lenses This camera supports autofocus with AF S and AF I CPU lenses only AF S lenses have names beginning with AF S AF I lenses names beginning with AF I Autofocus is not supported with other autofocus AF lenses The following table lists the features available with compatible lenses in viewfinder alisca A Camera setting Focus Metering E leads Lens accessory rangefinder Other modes 3D Color AF S AF I NIKKOR v v vvv v v O
88. not go near the charger during thunderstorms Failure to observe this precaution could result in electric shock Do not handle the plug or charger with wet hands Failure to observe this precaution could result in electric shock Notices e No part of the manuals included with this product may be reproduced transmitted transcribed stored in a retrieval system or translated into any language in any form by any means without Nikon s prior written permission e Nikon reserves the right to change the specifications of the hardware and software described in these manuals at any time and without prior notice Notice for Customers in Canada CAN ICES 3 B NMB 3 B Notices for Customers in Europe CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS This symbol indicates that electrical and electronic equipment is to be collected separately The following apply only to users in European countries m e This product is designated for separate collection at an appropriate collection point Do not dispose of as household waste e Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal e For more information contact the retailer or the local authorities in charge of waste management e Do not use with travel converters or adapters
89. ns information that should be read before use to prevent damage to the camera This icon marks notes information that should be read before using the camera LH This icon marks references to other pages in this manual Menu items options and messages displayed in the camera monitor are shown in bold Table of Contents Package COMME SINS samne A E i EOF YOUN A Y E E enna ener iv NOCES aep ae errr ee ene eee nee eee ee V Introduction 1 Getting to Know the Camera ssessseessseesseesseessseessessseessseonsessseesseeoeeesseosseosseesssroseeosseesseosseessseesss 1 The Camera BOOY soprsssrieinniiiepii Iera E nai aa EE TE iR akino 1 UNS NLS a O E E A EN 3 The Vie viind E aonan NE SE O 4 TRE NONO E AE E AET OE A 5 The Information Display ccssssssssssssssssssssssscsssscssssssessssssssssssssassscsessssecassscsessssecsssncaesesseesees 6 PSU CIOS e E evteaesstes sean spteeieeats acestscseseosseaeeoees 7 Basic Photography 14 Battery Level and Card Capa city cccsssssssssssssscsssssscessssessssessesssecscassesssesecsssescseseesessecessees 14 Point and Shoot Photography and MOdeS sesssssssssssessesssesssesssesseessessseesseesses 15 Creative Photography Scene Modes csssesscsssesscsssecsssssscssssssssssssecsssesscsssecscessecssseescsssesseass 19 ERO Moa B eeeemeneennre me err mner N E 19 Aner e 9 cin e e ener er ene net tort eer een E eer eee eee 21 Playback and Deletion 24 VIEWING Photog
90. ode Focus lock Flash Built in flash Guide Number Flash control Flash mode Flash compensation Flash ready indicator Accessory shoe Nikon Creative Lighting System CLS Sync terminal White balance White balance ISO 100 6400 in steps of 3 EV Can also be set to approx 0 3 0 7 1 or 2 EV ISO 25600 equivalent above ISO 6400 auto ISO sensitivity control available Auto extra high high normal low off Nikon Multi CAM 4800DX autofocus sensor module with TTL phase detection 39 focus points including 9 cross type sensor and AF assist illuminator range approx 0 5 3 m 1 ft 8 in 9 ft 10 in 1 19 EV ISO 100 20 C 68 F e Autofocus AF Single servo AF AF S continuous servo AF AF C auto AF S AF C selection AF A predictive focus tracking activated automatically according to subject status e Manual focus MF Electronic rangefinder can be used Can be selected from 39 or 11 focus points Single point AF 9 21 or 39 point dynamic area AF 3D tracking auto area AF Focus can be locked by pressing shutter release button halfway single AE L servo AF or by pressing ari Om button AUTO oy 1 a 4 2 Y D X 4 Auto flash with auto pop up P S A M t1 Manual pop up with button release Approx 12 39 13 43 with manual flash m ft ISO 100 20 C 68 F TTL i TTL flash control using 2016 pixel RGB sensor is available with built in flash and SB 910 SB 900 SB
91. of four nine or 72 images thumbnail playback press the amp amp button To view images taken on a selected date calendar playback press the amp amp button when 72 images are displayed Full frame Thumbnail playback Calendar playback playback 24 BE Thumbnail Playback Use the multi selector or command dial to highlight images and press 6 to display the highlighted image full frame Press amp to reduce the number of images displayed EE Calendar Playback Press the Q1 button to toggle between the date list and the list of thumbnails for the selected date Use the multi selector to highlight dates in the date list or to highlight pictures in the thumbnail list Press amp when the cursor is in the date list to return to 72 frame playback Date list Deleting Pictures 1 Display a picture and press the button Display the picture you wish to delete and press the button A confirmation dialog a will be displayed to exit without deleting BADD the picture press gt w button 2 Press the t button again Press the 1T button again to delete the picture 25 More on Photography All Modes Single Frame Continuous Self timer Remote and Quiet Release Modes Choose from the following release modes Mode Description LS Single frame Camera takes one photograph each time shutter release button is pressed Continuous L continuous low speed The camera
92. of lenses ETC angle oivisw with FX format angle of view Effective pixels Effective pixels 24 1 million Image sensor Image sensor 23 5 x 15 6 mm CMOS sensor Total pixels 24 71 million Dust reduction System Image sensor cleaning Image Dust Off reference data optional Capture NX 2 software required Storage Image size pixels e 6000 x 4000 Large e 4496 x 3000 Medium e 2992 x 2000 Small File format e NEF RAW 14 bit compressed e JPEG JPEG Baseline compliant with fine approx 1 4 normal approx 1 8 or basic approx 1 16 compression e NEF RAW JPEG Single photograph recorded in both NEF RAW and JPEG formats Picture Control System Standard Neutral Vivid Monochrome Portrait Landscape selected Picture Control can be modified storage for custom Picture Controls Media SD Secure Digital and UHS I compliant SDHC and SDXC memory cards File system DCF Design Rule for Camera File System 2 0 DPOF Digital Print Order Format Exif Exchangeable Image File Format for Digital Still Cameras 2 3 PictBridge Viewfinder Viewfinder Eye level pentamirror single lens reflex viewfinder Frame coverage Approx 95 horizontal and 95 vertical Magnification Approx 0 78 x 50 mm f 1 4 lens at infinity 1 0 m7 Eyepoint 17 9 mm 1 0 m from center surface of viewfinder eyepiece lens Diopter adjustment 1 7 0 7 m Focusing screen Type B BriteView Clear Matte Mark VII screen Reflex mirror Quick retur
93. on Using the at O n button Playback zoom in Protecting photographs Power connector cover for from deletion k optional power connector KJ Command dial Battery chamber cover latch i putton MI ecenin 7 11 Playback sssssssssssssssrereesssssss 24 PX Battery chamber cover 7 11 12 OK button ss000000000001 68 Q5 button Memory card slot cover Thumbnails 000 24 25 eee ene are 8 12 Playback zoom out Multi Selector ccccccscscscseseees 68 S Reman nee ore entra ee ere rae 65 Memory card access lamp 22 Battery latch esses 7 11 A E T 17 45 button Deleting pictures 25 I The Microphone and Speaker Do not place the microphone or speaker in close proximity to magnetic devices Failure to observe this precaution could affect the data recorded on the magnetic devices The Power Switch Rotate the power switch as shown to turn Rotate the power switch as shown to turn the camera off the camera on The Mode Dial The camera offers a choice of the following shooting modes P S A and M Modes Special Effects Modes Select these modes for full control over Use special effects during shooting camera settings Night vision M 59 e P Programmed auto 42 43 ES Color sketch C1 59 61 e S Shutter priority auto N 42 43 Miniature effect 1 59 62 e A Aperture priority auto N 42 43 Selective color 1 60 63 e M Manual M 42 43 A Silhouette MA 60
94. on on desktop Double click Lb Welcome icon 2 Selectala nguage Select region if required Ifthe desired language is not available click Region Selection to choose a different region and then choose the Risen tera oti l Select desired language region selection is language not available in the European release smsa CO Click Next 3 Start the installer Click Install and follow the on screen instructions Installation Guide sete sania For help installing ViewNxX 2 click Installation Guide iN inStep3 EE Click Install 70 4 Exit the installer Windows Mac 0S x So Nikon The installation is complete Is it OK to exit Install Center e The installation is complete Is it OK to exit Install Center g Click Yes Click OK The following software is installed e ViewNX 2 e Apple QuickTime Windows only 5 Remove the installer CD from the CD ROM drive System Requirements Windows Mac 0S e Photos JPEG movies Intel Celeron Pentium 4 or e Photos JPEG movies Intel Core or Xeon Core series 1 6 GHz or better series e H 264 movies playback 3 0 GHz or better e H 264 movies playback Core Duo 2 GHz or Pentium D Intel Core i5 or better better Intel Core i5 or better recommended when viewing movies with a recommended when viewing movies frame size of 1280x720 or more ata framerate witha frame size of 1280x720 or more at of 30 fps or above or m
95. ons e MF 0 25 m 0 82 ft from focal plane at all zoom positions Diaphragm blades 7 rounded diaphragm opening Diaphragm Fully automatic Aperture range e 18mm focal length f 3 5 22 e 55 mm focal length f 5 6 36 The minimum aperture displayed may vary depending on the size of the exposure increment selected with the camera Metering Full aperture Filter attachment size 52 mm P 0 75 mm Dimensions Approx 66 mm diameter x 59 5 mm distance from camera lens mount flange when lens is retracted Weight Approx 195 g 6 9 oz Nikon reserves the right to change the specifications of the hardware and software described in this manual at any time and without prior notice Nikon will not be held liable for damages that may result from any mistakes that this manual may contain 89 90 The AF S DX NIKKOR 18 55mm f 3 5 5 6G VR II The lens generally used in this manual for illustrative purposes is an AF S DX NIKKOR 18 55mm f 3 5 5 6G VR II Focal length mark Mounting mark 8 Focal length scale Retractable lens barrel button CQ 9 L contacts Q 75 Rear lens cap Se M mode switch Lens cap Focus ring Vibration reduction ON OFF switch Zoom ring Q 16 The AF S DX NIKKOR 18 55mm f 3 5 5 6G VR II features a retractable lens barrel Trademark Information IOS is a trademark or registered trademark of Cisco Systems Inc in the United States and or other countries and is used under license Macintosh Mac OS and QuickT
96. ors seen in the weak natural light before dawn or after sunset The built in flash and AF assist illuminator turn off use of a tripod is recommended to prevent blur when lighting is poor Use for portraits of active pets The AF assist illuminator turns off 6 candlelight For photographs taken by candlelight The built in flash turns off use of a tripod is recommended to prevent blur when lighting is poor m Blossom eae ee Use for fields of flowers orchards in bloom and other landscapes featuring expanses of blossoms The built in flash turns off use of a tripod is recommended to prevent blur when lighting is poor Captures the brilliant reds and yellows in autumn leaves The built in flash turns off use of a tripod is recommended to prevent blur when lighting is poor Use for vivid photographs of food Use of a tripod is recommended to prevent blur the built in flash can also be used M 36 23 Playback and Deletion Photographs are automatically displayed for a few seconds after shooting If no photograph is displayed in the monitor the most recent picture can be viewed by pressing the P button Viewing Photographs 1 Press the gt button A photograph will be displayed in the monitor 2 View additional pictures Additional pictures can be displayed by pressing lt or gt or rotating the command 7 dial Display pictures To display images in contact sheets
97. ovies with a frame size a frame rate of 30 fps or above or movies of 1920x1080 or more with a frame size of 1920x1080 or more e H 264 movies editing 2 6 GHz or better e H 264 movies editing 2 6 GHz or better Core 2 Duo Core 2 Duo Pre installed versions of Windows 7 Home Basic Home Premium Professional Enterprise Ultimate 64 and 32 bit editions Service Pack 1 Windows Vista Home Basic Home Premium Mac OS X version 10 6 8 10 7 5 or 10 8 2 Business Enterprise Ultimate 64 and 32 bit editions Service Pack 2 or Windows XP Home Edition Professional 32 bit editions only Service Pack 3 e Windows 7 Windows Vista 1 GB or more 2 GB or more recommended e Windows XP 512 MB or more 2 GB or more recommended RAM 512 MB or more 2 GB or more recommended ee A minimum of 500 MB available on the startup disk 1 GB or more recommended Resolution 1024768 pixels XGA or more Resolution 1024768 pixels XGA or more Monitor 1280x1024 pixels SXGA or more recommended 12801024 pixels SXGA or more recommended Color 24 bit color True Color or more Color 24 bit color millions of colors or more See the websites listed on page viii for the latest information on supported operating systems 71 Using ViewNX 2 Copy Pictures to the Computer 1 Choose how pictures will be copied to the computer Choose one of the following methods e Direct USB connection Turn the camera off and ensure that the memory card is
98. raphs sssessseessseesseesssessseeosseesseesnseossseosseeuseesnsessseeosseesseessseossseesseesseessseesss 24 PONS PV P T E E TEE temas seers 24 ETS FINN UUM os cscs sence vos eia cei cause eneesastae cect 25 More on Photography All Modes 26 Single Frame Continuous Self timer Remote and Quiet Release Modes 26 Self Timer and Remote Control MOdeS ccssssssssssssssssssssessssecsssecsescssscsessssecsssesssseessseeseeess 28 FOCUS eae rere re rer ee eee eee eee eee 30 FOCU MOOG eae nee tenes een eee nse E veer ee eee ene ee ene ee eet 30 AFAA MOO ae N E A E E ees 32 FOCUS POINT SCIGCUION kirosin iaae EnaA EEES EAEEREN 33 Image Quality and SiZe ss sssesssessseesseessseessessseessseesseesseessersseesseessseosseosseesssroseesseesseessereseseessees 34 Mage QUAMITY o 34 ERES S P E EEA EAT E S E T E E A E E 35 Using the Buik Flasi snsscsaaana an AARE 36 AMOG ar A E A A eae eee eee 37 poy go S n A 1 E E AT AA ET E EN O E E E E NA ore 39 Interval Timer Photography sssessseeseseessessseesssessseesseesssessseesseeoseeosseossessseesssrosseesseesseesseeessessseees 40 P S A and M Modes 42 Mode P Programmed AUTO errenneren anann eNO 43 Mode S Shutter Priority Auto ses ssseessseesssessseessseesseeonsessseeosseesseeonseosserossersseeosseossseessee 43 Mode A Aperture Priority AutoO sse ssseesssessseessseesseessseesssessseeosseesseeoneeosserosseesseessseessee 43 Moge M Manual sa
99. s This section lists the indicators and error messages that appear in the viewfinder and monitor Warning Icons A flashing in the monitor or in the viewfinder indicates that a warning or error message can be displayed in the monitor by pressing the amp amp button Indicator Monitor Viewfinder Solution Lock lens aperture ring at minimum aperture largest f number FEE Set lens aperture ring to minimum aperture highest flashes f number F 2 e Attach non IX NIKKOR lens Lens not attached flashes e If non CPU lens is attached select mode M Before taking photos rotate pae A lens with a retractable lens barrel button is attached the zoom ring to extend the fl with the lens barrel retracted Press the retractable lens lens barrel button and rotate the zoom ring to extend the lens SUNETI Edhi Panie ia Turn camera off and recharge or replace batter Recharge battery flashes g p z This battery cannot be used Choose battery designated Use Nikon approved battery Ea flashes for use in this camera Initialization error Turn camera off and then on again Battery level is low End cleaning and turn camera off and recharge or Complete operation and turn replace battery camera off immediately ca E r Turn camera off remove and replace battery and then flashes turn camera on again Clock not set Set camera clock No SD card inserted aE TEY Turn camera off an
100. s in the monitor Display options Press to display selective color options Select a color Frame an object in the white square in the center of the display and press A to choose the color of the object as one that will remain in the final image the camera may have difficulty detecting unsaturated colors choose a saturated color To zoom in on the center of the display for more precise color selection press amp Press R to zoom out 125 F5 6 alo 100 1 0 k Choose the color range Color range Press A or to increase or decrease the range of similar hues that will be included in the final image Choose from values between 1 and 7 note that higher values may include hues from other colors 1125 F5 6 a100 1 Select additional colors To select additional colors rotate the command dial to highlight another of the three color boxes at the top of the display and repeat Steps 3 and 4 to select another color Repeat for a third color if desired To deselect the highlighted color press t To remove all colors press and hold T A confirmation dialog will be displayed select Yes a100 1 0k 1125 F5 6 EFFECTS 63 6 Return to the live view display Press 8 to return to live view During shooting only objects of the selected hues will be recorded in color all others will be recorded in black and white To exit live view rotate the live view switch The sel
101. s remain soft and natural Fast shutter speeds freeze motion for dynamic sports shots in which the main subject stands out clearly The built in flash and AF assist illuminator turn off Use for close up shots of flowers insects and other small objects a macro lens can be used to focus at very close ranges Use of a tripod is recommended to prevent blur Other Scenes The following scenes can be selected by rotating the mode dial to SCENE and rotating the command dial until the desired scene appears in the monitor a PE xm Night landscape SCENE Command dial Monitor Use for a natural balance between the main subject and the background in portraits taken under low light Use of a tripod is recommended to prevent blur Reduce noise and unnatural colors when photographing night landscapes including street lighting and neon signs The built in flash and AF assist illuminator turn off use of a tripod is recommended to prevent blur Capture the effects of indoor background lighting Use for parties and other indoor scenes 21 22 28 Beach Snow a Dusk Dawn Capture the brightness of sunlit expanses of water snow or sand The built in flash and AF assist illuminator turn off Preserves the deep hues seen in sunsets and sunrises The built in flash and AF assist illuminator turn off use of a tripod is recommended to prevent blur when lighting is poor Preserves the col
102. selected for AF area mode 47 ar ia iA AUTO 100 oF ESD n m m 0 0 a 00 g Ci Bac a gt 1125 F5 6 0100 1 0k 2 face priority AF A double yellow border will be AF SENOS A ESD A CONOR displayed when the camera detects a portrait subject if multiple faces up to a maximum of 35 are detected the camera will focus on the closest subject to choose a different subject use the multi selector If the camera can no longer detect the subject because for example the subject has turned to face away from the camera the border will no longer be displayed OK LOJN gt M fwe vow wide and normal area AF Use the multi selector to move the focus point anywhere in the frame or press to position the focus point in the center of the frame 44 subject tracking AF Position the focus point over your subject and press The focus point will track the selected subject as it moves through the frame To end focus tracking press K a second time Focus point V Subject Tracking The camera may be unable to track subjects if they move quickly leave the frame or are obscured by other objects change visibly in size color or brightness or are too small too large too bright too dark or similar in color or brightness to the background The Live View Displa high adjust microphone sensitivity accordingly Focus mode The current focus mode
103. shutter has been released Note that the timer may not start or a photograph may not be taken if the camera is unable to focus or in other situations in which the shutter can not be released Turning the camera off cancels self timer and remote control release modes and restores single frame continuous or quiet shutter release mode EE Using Optional WR R10 and WR T10 Wireless Remote Controllers A 77 When a WR T10 is used in combination with a WR R10 the shutter release button on the WR T10 performs the same functions as the camera shutter release button allowing wireless remote control continuous and self timer photography For more information see the manual provided with the WR R10 WR T10 M Before Using the ML L3 Remote Control Before using the ML L3 for the first time remove the clear plastic battery insulator sheet Remote Control Photography In quick response ML L3 or delayed remote ML L3 release mode the camera responds only to the shutter release button on the ML L3 remote control Choose a different release mode when using WR R10 WR T10 wireless remote controllers Cover the Viewfinder When taking photos without your eye to the DK 20 rubber eyecup DK 5 eyepiece cap viewfinder remove the DK 20 rubber eyecup and insert the supplied DK 5 eyepiece cap as shown This prevents light entering via the viewfinder interfering with exposure Hold the camera firmly when removing the rubber eyecup
104. shutter speed Large aperture f 5 6 Small aperture f 22 16005 1s Remember the higher the f number the smaller the aperture 42 Mode P Programmed Auto In this mode the camera automatically adjusts shutter soeed and aperture for optimal exposure in most situations User can rotate command dial to choose from different combinations of shutter soeed and aperture that will produce optimal exposure Mode S Shutter Priority Auto In shutter priority auto you choose the shutter speed while the camera automatically selects the aperture that will produce the optimal exposure To choose a shutter speed rotate the command dial Mode A Aperture Priority Auto In aperture priority auto you choose the aperture while the camera automatically selects the shutter 5 speed that will produce the optimal exposure To choose an aperture rotate the command dial the maximum and minimum values for aperture vary with the lens used Mode M Manual In manual mode you control both shutter speed and aperture Shutter speed is set by rotating the command dial aperture by rotating the command dial while keeping the 4 button pressed the maximum and minimum values for aperture vary with the lens used Check exposure using the exposure indicator Command dial The Exposure Indicator NORM OFF OFF A EISD AF A Cmi NORM OFF OFF A FISD AF A
105. splay 2 Display image size options Highlight the current image size in the information display and press v Non MSM PFF OFF A A TO 100 00 amp 00 Image size GidBack 3 Choose an image size Highlight an option and press 6 To return to nes shooting mode press the shutter release button C 47M8 1 7 halfway GIBack MIOK File Names Photographs are stored as image files with names of the form DSC_nnnn xxx where nnnn is a four digit number between 0001 and 9999 assigned automatically in ascending order by the camera and xxx is one of the following three letter extensions NEF for NEF images JPG for JPEG images or MOV for movies The NEF and JPEG files recorded at a setting of NEF RAW JPEG have the same file names but different extensions The Fn Button Image quality and size can also be adjusted by rotating the command dial while keeping the Fn button pressed See Custom Setting f1 Assign Fn button 66 35 Using the Built in Flash The camera supports a variety of flash modes for photographing poorly lit or backlit subjects BE Using the Built in Flash a Ea X a and Modes 1 Choose a flash mode M 37 2 Take pictures The flash will pop up as required when the shutter release button is pressed halfway and fire when a photograph is taken Ifthe flash does not pop up automatically DO NOTattempt to raise it by hand F
106. ssis viieks ES erai eni E iiai 43 Exposure Compensation Mode P S A and HA Only sesessseesssessseesssessseessseesseesssessss 44 Live View 45 Framing Photographs in the MONItOM csssesssssssssssessssssecscsssecsssssscsssescsssesesssseesescsesesssseees 45 Focusing mM Live Vie W ssusiaaonissan ee treet en cerca are ey ete cen eee eran 46 The Live View IS OLA acc cncaacesscstucs tavcass entra accvsaneeaterases aE 49 Recording and Viewing Movies 53 R cording MOVIES estate sissies custecevegndiecacesenetis padeopsaseraivoneetartassostises ieee tues eI 53 Movie SENOS geese cee nea REEE ai ER 55 VIEWING MOVIGO S ionis A eis 57 Special Effects 58 Shooting with Special Effects cesssssssesssssssssecsssecsssscsessssecsssssscsesscsessssecsssecsesscsecscsesssseesesscess 58 Options Available in Live VieW sss sssessesssesssessscesseesseesseosseoserosesssesseesneesnecessroseroseessees 61 Camera Menus 65 Menm DROS srna secs ecscaseceseseevseeceecuceotnanscas neater tenner irene 66 US Tare Camera MENUS eee ene ee ee ee ne ee err 68 ViewNX 2 70 mstaling VEWNA Zagares nnan Verne renner rttnry Westy ANOT 70 USMO VIEWNA Zorin ainn renee rece arene rere rere eee ere erer reer 72 Copy Pictures to the COMPUTE csesssscssscsssecsssssscsssecsssesscsssecsssececsesecsssecsssescsesecsenees 72 VIEN PICOT caet enert rene nt near ore ERE en Ont een eRe Tens nee a ner ee 73 Technical Notes 74 Compatible Le MS SS iee a aaea 74 Co
107. t pressure on the curtain poke it with cleaning tools or subject it to powerful air currents from a blower These actions could scratch deform or tear the curtain 79 80 Storage To prevent mold or mildew store the camera in a dry well ventilated area If you are using an AC adapter unplug the adapter to prevent fire If the product will not be used for an extended period remove the battery to prevent leakage and store the camera in a plastic bag containing a desiccant Do not however store the camera case in a plastic bag as this may cause the material to deteriorate Note that desiccant gradually loses its capacity to absorb moisture and should be replaced at regular intervals To prevent mold or mildew take the camera out of storage at least once a month Turn the camera on and release the shutter a few times before putting it away Store the battery in a cool dry place Replace the terminal cover before putting the battery away Notes on the monitor The monitor is constructed with extremely high precision at least 99 99 of pixels are effective with no more than 0 01 being missing or defective Hence while these displays may contain pixels that are always lit white red blue or green or always off black this is not a malfunction and has no effect on images recorded with the device Images in the monitor may be difficult to see in a bright light Do not apply pressure to the monitor as this could cause dama
108. t to view Nikon e digital camera manuals anytime anywhere Nikon Manual Viewer 2 can be 4 downloaded free of charge from the App Store and Google Play Download of the app and any product manuals requires an Internet connection for which fees may be levied by your phone or Internet service provider Z For Your Safet Before using the camera for the first time read the safety instructions in For Your Safety CO iv viii Package Contents Confirm that the package contains the following items _ BS 1 accessory shoe cover _ DK 20 rubber eyecup BF 1B body cap _ EN EL14 rechargeable MH 24 battery charger plug AN DC3 strap Li ion battery with terminal adapter supplied in countries or cover regions where required shape depends on country of sale _ UC E17 USB cable _ EG CP16 audio video cable _ DK 5 eyepiece cap 1 29 _ ViewNX 2 CD ROM _ Reference CD contains the Reference Manual _ User s Manual this booklet _ Warranty Purchasers of the lens kit option should confirm that the package also includes a lens Memory cards are sold separately Q 77 Cameras purchased in Japan display menus and messages in English and Japanese only other languages are not supported We apologize for any inconvenience this may cause Symbols and Conventions To make it easier to find the information you need the following symbols and conventions are used V This icon marks cautio
109. tarts at the desired time select Time zone and date in the setup menu and check that the camera clock is set correctly A 66 Use of a tripod is recommended Mount the camera on a tripod before shooting begins To ensure that shooting is not interrupted be sure the battery is fully charged or use an optional EH 5b AC adapter and EP 5A power connector 1 Select Interval timer shooting OUTS MENU ntervai timer snooting Press the MENU button to display the menus a Movie settings Highlight Interval timer shooting in the Mf shooting menu and press gt s MENU button 2 Chooseasta rting time Interval timer shooting Choose start time Choose from the following starting triggers z e To start shooting immediately highlight Now and press Shooting begins about three seconds after settings are completed A proceed to Step 3 e Tochoosea starting time highlight Start time renal timer shooting and press gt to display the start time j i 4 108 options shown at right Press lt or P to l highlight hours or minutes and press A or 05 to change Press to continue 4 E Start time amp 00 01 00 iD 001 3 Choose the interval oe eae Press lt or P to highlight hours minutes or y seconds and press A or W to choose an interval longer than the slowest anticipated shutter speed Press to continue a Oo 8 00 01 00 001 40 4 Choose the number of intervals Interval timer shooting Numb
110. ther type G or D AF NIKKOR Y W y wv v v PC E NIKKOR series v ve de PC Micro 85mm f 2 8D Ze 2 v v AF S AF I teleconverter vV v Yy Y v w Other AF NIKKOR except lenses for F3AF Y vliv wv v v AP NIKKOR O ve A y iie 1 Use AF S or AF I lenses to get the most from your camera Vibration Reduction VR supported with VR lenses 2 Spot metering meters selected focus point 09 Can not be used with shifting or tilting The camera s exposure metering and flash control systems may not function as expected when the lens is shifted and or tilted or an aperture other than the maximum aperture is used AF S or AF I lens required With maximum effective aperture of f 5 6 or faster When AF 80 200mm f 2 8 AF 35 70mm f 2 8 AF 28 85mm f 3 5 4 5 New or AF 28 85mm f 3 5 4 5 lenses are zoomed all the way in at the minimum focus distance the in focus indicator may be displayed when the image on the matte screen in the viewfinder is not in focus Focus manually until image in viewfinder is in focus 8 With maximum aperture of f 5 6 or faster aS N OAU IX NIKKOR Lenses IX NIKKOR lenses can not be used Lens f number The f number given in lens names is the maximum aperture of the lens 74 Identifying CPU and Type G and D Lenses CPU lenses can be identified by the presence of CPU contacts type Gand D lenses by a letter on the lens barrel Type G lenses are not equipped with a l
111. tor Open the monitor as shown Do not use force 7 Turn the camera on A language selection dialog will be displayed Lenses with Retractable Lens Barrel Buttons Before using the camera unlock and extend the zoom ring Keeping the retractable lens barrel button pressed 1 rotate the zoom ring as shown Retractablelens barrel button Pictures can not be taken when the lens is retracted if an error message is displayed as a result of the camera having been turned on petore eres rotate the zoom ring with the lens retracted rotate the zoom ring to extend the lens until the message is no longer displayed 8 Choose a language and set the camera Move cursor up clock button select Use the multi selector and button to highlighted item select a language and set the camera clock f Select highlighted item or display sub menu Move cursor down Language 2 Time zone e tina Dansk 3 Time zone and date Date format Y M D Year Month Day Deutsch W D Y Month Day Year Espa ol Ye EMnvik London Casablanca Francais UTC 0 15 04 2012 10 00 00 Indonesia OKON Select language Select time zone Select date format Time zone and date slate Time zoe atte Note The language and Daylight saving time Date and tim seinen date time can be changed at any time using the YMD HMS A120040 15 E 10 008 00 Language and T
112. uct e Use only batteries approved for use in this equipment Do not short or disassemble the battery Be sure the product is off before replacing the battery If you are using an AC adapter be sure it is unplugged Do not attempt to insert the battery upside down or backwards Do not expose the battery to flame or to excessive heat Do not immerse in or expose to water Replace the terminal cover when transporting the battery Do not transport or store the battery with metal objects such as necklaces or hairpins Batteries are prone to leakage when fully discharged To avoid damage to the product be sure to remove the battery when no charge remains When the battery is not in use attach the terminal cover and store in a cool dry place The battery may be hot immediately after use or when the product has been used on battery power for an extended period Before removing the battery turn the camera off and allow the battery to cool Discontinue use immediately should you notice any changes in the battery such as discoloration or deformation A Observe proper precautions when handling the charger Keep dry Failure to observe this precaution could result in fire or electric shock Do not short the charger terminals Failure to observe this precaution could result in overheating and damage to the charger Dust on or near the metal parts of the plug should be removed with a dry cloth Continued use could result in fire Do

Download Pdf Manuals

Related Search

Related Contents

  e+p KW 6 L coaxial connector  Using the power override box LED Interior Light  取扱説明書 - パナソニック  View PDF Manual - SPX - Instant Screen Capture  厚生労働省医政局総務課  avvertenza - Husqvarna    SUNNY CENTRAL - Instruzioni per l`uso  View &  

Copyright © All rights reserved. Failed to retrieve file