BIN-SENSE® Quick Start Guide
Contents
1. GREEN see Figure 2 after the battery is p ania connected If you are using an auxiliary battery pack plug the auxiliary battery cables 4 ____ x together You will see the LED flash rapidly o Fees GREEN after the battery is connected 3 Press and release the scan button located on the right side of the Master unit see Figure 2 The LED in the Master unit will turn off 4 Press and hold the scan button for 5 seconds and then release The GREEN LED will be solid for a few seconds then turn off 5 In the next 30 minutes the LED in every Remote unit will turn off one by one which means they are connected to the Master unit Within 1 hour you will receive a text message saying how many Remote units are connected with the Master unit 6 Congratulations you have initialized your BIN SENSE system Now you can place your Master and Remote units on top of your grain bins according to your MAP and connected them with the sensor cables s Contact Us For support questions troubleshooting or held with your BIN SENSE system please contact your local retailer for more information and assistance or IntraGrain Technologies Inc Head Office at info intragrain com or 306 570 7979 Thank you 7000012. BIN SENSE Quick Start Guide 1 0 Introduction Congratulations on purchasing your BIN SENSE system This Quick Start Guide is designed to direct you through the installation of the BIN SENSE system plus show you how to establish connection between the Master and Remote units before they are installed on top of the bin 2 0 Overview 2 1 Master Unit Overview and Detail K LF imr LED User N Button 1 Sensor link cable Optional auxiliary battery cable 3 Scan button Figure 1 Figure 2 2 2 Remote Overview CEZ p 7T LED User ZIN Button HoN Figure 3 3 0 Getting Started For first time installation Master and Remote units must be initialized before you install them on your bin Use the following steps to initiate the connection between the Master and Remote units For detailed information and cable installation please refer to BIN SENSE Live User Manual Section 2 0 700001 1 Install all 3 AA lithium batteries provided to ALL Remote units first see Figure 4 Secure tightly with the Velcro strap provided You JWE i will see the LED flash RED see Figure 3 after the batteries are installed 2 Inside the Master unit locate the red wire Figure 4 which is taped to the side of the 6 volt battery Hook up the Master unit battery by connecting this red wire to the red post on the battery see ee Figure 5 You will see the LED flash rapidly Red positive
Download Pdf Manuals
Related Search