EQ120 & EQ180 User Manual
Contents
1. 262 Y Y 4 6 Dimensions INTERFACE PLATE 4 HOLES o 28 7 2 ON SQUARE 3 97 100 8 35 9 4HOLES MA THD 1 E ON 3 62 92 DEPTH 31 8 12 ja 12 s236 N Vi 60 6 30 1 X 160 4 1 97 7 gt 50 p x 5 HOLES M5 THD SY ON 5 39 137 DEPTH 47 12 12 5 lt 275 pig 325 A 2 x 4 HOLES M6 THD DEPTH 47 12 E 3 94 100 i a 35 Je 3 94 100 iam 4 HOLES M6 THD ON SQUARE 3 94 100 DEPTH 47 12 o q o 3 94 3 POSITIONS 100 4 80 122 10 31 262 15 83 402 b 2 4 39 5 Y Y PM 6 14 156 1 lt 3 94 100 gt CY Newport 5 EDH0191En1011 06 05 120 amp 180 Right Angle Brackets for ILS and IMS Stages mn EQ180 Bracket 5 1 EDH0191En1011 06 05 Interface Plate Position Direction 4 2x2 screws to mount the interface plate o m 92 Jor 74 Direction Mounting holes Ao e for RV120 or RV160 mounting holes for or ope M SAO stages rotation stages Dy mE lt Flange 2 IQ i Setting girder Interface plate Mounting holes of the bracket2. 2 x 3 locking screws A for the setting ATTENTION The EQ180 bracket is provided with its interface plate mounting plane for RV rotation stages with a slight offset towards flanges of the bracket mounting plane for M IMS stages This interface plate can be moved in 3 positions but must not be taken off between both flanges of the bracket CY Newport Experience Solutions EQ120 amp EQ180 Right Angle Brackets for ILS and IMS Stages m 5 2 Mounting an IMS Stage in Vertical Position Fix the bracket on a support IMS stage without interface plate or working table with 4 screws M6 x 30 and the wrench supplied O Make sure there is a slight offset between the interface plate and flanges of the bracket see section 5 1 Fix the IMS stage with 8 screws x 40 supplied The quantity of mounting screws for IMS stages change in accordance with its travel range see IMS user s manual Adjust the squareness if necessary see chapter 2 5 3 Mounting a RV Rotation Stage in Vertical Position Fix the bracket on a support IMS stage without interface plate or working table with 4 screws M6 x 30 and the wrench supplied Unscrew slightly 4 interface plate mounting screws Fix the RV stage on the interface plate screws supplied The quan tity of mounting screws for RV rotation stages change in accordance with its size RV120 5 screws M5 x 25 and wrench supplied RV160 4
3. of the bracket Elo 9 Interface Plate Position ATTENTION The EQ120 bracket is provided with its interface plate mounting plane for RV rotation stages with a slight offset towards flanges of the bracket mounting plane for M ILS stages This interface plate can be moved in 3 positions but must not be taken off between both flanges of the bracket e i ere 0 9 3 EDH0191En1011 06 05 120 amp 180 Right Angle Brackets for ILS and IMS Stages 4 2 Mounting an ILS Stage in Vertical Position e 6 EDH0191En1011 06 05 Fix the bracket on support ILS stage without interface plate or working table with 4 screws M6 x 25 and the wrench supplied Make sure there is a slight offset between the interface plate and flanges of the bracket see section 4 1 Fix the ILS stage with M6 x 16 screws supplied The quantity of mounting screws for ILS stages change in accordance with its travel range see ILS user s manual Adjust the squareness if necessary see chapter 2 4 3 Mounting a RV Rotation Stage in Vertical Position Fix the bracket on a support ILS stage without interface plate or working table with 4 screws M6 x 25 and the wrench supplied Unscrew slightly 4 interface plate mounting screws Fix the RV stage on the interface plate screws supplied The quan tity
4. screws M5 x 25 and wrench supplied As the rotation stage base is larger than the interface plate press it on flange edges of the bracket Q Tighten 4 screws 5 4 Moving the Interface Plate The bracket is supplied with the interface plate located at the middle position Nevertheless it can be moved to 3 different heights according to your application Remove 4 screws 0 with the wrench supplied Move the interface plate with a mallet to the height needed It must not be taken off between both flanges of the bracket Tighten slightly 4 screws Fix the RV stage on the interface plate screws supplied The quan tity of mounting screws for RV rotation stages change in accordance with its size RV120 5 screws M5 x 25 and wrench supplied RV160 4 screws 5 x 25 and wrench supplied As the rotation stage base is larger than the interface plate press it on flange edges of the bracket Lock 4 screws Newport Experience Solutions 7 EDH0191En1011 06 05 EQ120 amp EQ180 Right Angle Brackets for ILS and IMS Stages 5 5 Interface Plate Positions gt o 13 70 348 L 5 4 610 155 QD Newport E
5. the well balanced design of the EQ brackets together with the high load capacity bearings used on our stages will considerably limit the stress generated by off centered loads on a motion axis the lifetime of your system will thus be increased Secondly our brackets and stages have been Newport Experience Solutions 1 EDHO0191En1011 06 05 120 amp EQ180 Right Angle Brackets for ILS and IMS Stages engineered with the greatest care to ensure the best quality and perfor mance This results in 3D motion systems of high stiffness to weight ratio that provides higher system resonant frequency for faster motion and shorter settling times Finally the rigid lightweight structure of our motion system also minimizes load induced positioning errors to give superior positioning accuracy 2 1 Compatibility EQ120 EQ180 Horizontal M ILS without top plate M IMS Mount M IMS without top plate Vertical M ILS all travel ranges M IMS300 M IMS400 Mount RV80 RV120 RV120 RV160 2 2 Weight of Brackets Weights are indicated for brackets without any loads EQ120 kg 3 1 EQ180 kg 9 6 m Squareness Adjustment The squareness adjustment principle is the same regardless of the brackets and stages used ATTENTION This process must performed only when the bracket is fixed on the hold ing stage and when the vertical stage is mounted on the bracket 3 1 Adjustment Direc
6. DH0191En1011 06 05 8 Experience Solutions EQ120 amp EQ180 Right Angle Brackets for ILS and IMS Stages 5 6 Dimensions INTERFACE PLATE ange M 4 HOLES 6 6 ON SQUARE 5 91 150 5 m gt QHOLES M5 THD ae 22 DEPTH 47 12 N X N 1 N 0 6 85 6 69 174 748 170 190 0 2 36 A 3 60 gt bs Y 0 5 39 Y 137 1 18 030 gt 22 59 I k ol 1 1 1 97 50 5 91 150 5 91 150 x NDS 591 2 5 150 e 5 91 26 65 Si oe 150 651 5 Y o ee o 5 91 150 3 POSITIONS 5 91 6 10 155 150 13 70 348 o 21 85 555 2x4HOLES M6 THD Y 12 bre 4 92 2 x4 HOLES M6 THD DEPTH 12 125 ac Y H amp 1 54 191 5 lt 5 91 150 gt CY Newport Experience Solutions 9 EDH0191En1011 06 05 Service Form Your Local Representative Tel Fax Name Return authorization Please obtain prior to return of item Company Address Date Country Phone Number P O Number Fax Number Item s Being Returned Model Serial Description Reasons of return of goods please
7. Right Angle Brackets for ILS and IMS Stages lt gt USER S MANUAL Newport Experience Solutions EQ120 amp EQ180 Right Angle Brackets for ILS and IMS Stages Warranty Newport Corporation warrants this product to be free from defects in material and workmanship for a period of 1 year from the date of shipment If found to be defective during the warranty period the product will either be repaired or replaced at Newport s discretion To exercise this warranty write or call your local Newport representative or contact Newport headquarters in Irvine California You will be given prompt assistance and return instructions Send the instrument trans portation prepaid to the indicated service facility Repairs will be made and the instrument returned transportation prepaid Repaired products are warranted for the balance of the original warranty period or at least 90 days Limitation of Warranty This warranty does not apply to defects resulting from modification or mis use of any product or part CAUTION Warranty does not apply to damages resulting from e Incorrect usage Load on the stage greater than maximum specified load Carriage speed higher than specified speed Improper grounding 5 Connectors must be properly secured 5 When the load on the stage represents an electrical risk it must be connected to ground Excessive or improper cantilever loads Modification of the stage or a
8. list any specific problems QD Newport EDH0191En1011 06 05 10 Experience Solutions Newport Experience Solutions Visit Newport Online at L A A ood ot Tean North America amp Asia Europe Newport Corporation MICRO CONTROLE 1791 Deere Ave 1 rue Jules Guesde B t B Irvine CA 92606 USA ZI Bois de BP189 91006 Evry Cedex France Sales Sales amp Technical Support 949 253 1461 or 800 222 6440 x31461 33 0 1 60 91 68 68 e mail sales newport com e mail france newport fr com Technical Support Service amp Returns 949 253 1406 or 800 222 6440 x31406 33 0 2 38 40 51 55 e mail tech newport com Service RMAs amp Returns 949 253 1694 or 800 222 6440 x31694 e mail istd service newport com
9. mounting holes see section Dimensions Longer screws can damage threads of tapped holes Cautions CAUTION Do not place this bracket in a hostile environment such as X Rays hard UV or in a vacuum environment CAUTION Be careful that the bracket is not bumped when it is being carried This may cause it to malfunction CAUTION Contact your Newport service facility to request cleaning and specifica tion control every year QD Newport EDH0191En1011 06 05 iv Experience Solutions 120 amp EQ180 Right Angle Brackets for ILS and IMS Stages Right Angle Brackets for ILS and IMS Stages EQ120 amp 180 1 0 Introduction This manual provides operating instruction to mount the EQ120 bracket with M ILS linear stages and RV80 and RV120 rotation stages and the EQ180 bracket M IMS linear stages and RV120 and RV160 rotation stages EQ120 bracket on IMS stages with 180 bracket with an IMS stage an ILS stage in vertical position and a RV160 rotation stage RECOMMENDATION Only screws indicated in this user s manual should be unscrewed Other types fully contribute towards the stiffness of the bracket Description Newport s set of brackets models EQ120 and EQ80 are ideal for mounting our ILS IMS Series of linear stages and RV rotation stages for stable and stiff muti axis positioning systems The advanced precision technologies used in our products offer many ben efits Firstly
10. n Vertical Position 4 4 4 Moving the Interface 4 45 Interface Plate Positions teer ertet 5 4 6 5 5 0 EQ180 Bracket 71 eerte 6 5 1 Interface Plate Position nennen nnne nnns 6 5 2 Mounting an IMS Stage in Vertical Position sese 7 5 3 Mounting a RV Rotation Stage in Vertical Position 7 54 Moving the Interface Plate ccccccsccsscssessesssesseessessessesssesseessesseeseeees 7 5 5 Interface Plate Positions essent nnns 8 5 6 Dime nsiOlis ug e RO ERES 9 SEVICE FON eene iod des seri ese ete iie 10 QD Newport Experience Solutions iii EDH0191En1011 06 05 120 amp EQ180 Right Angle Brackets for ILS and IMS Stages Warnings WARNING The moving of objects of all types carries potential risks for operators Ensure the protection of operators by prohibiting access to the danger ous area and by informing the personnel of the potential risks involved WARNING Do not place this bracket in unstable locations such as on a wobbly table or sloping surface where it may fall or tip over and cause injury If this bracket has been dropped or the case has been damaged contact your Newport service facility and request repairs WARNING Do not exceed the usable depth indicated on the
11. ny part This warranty is in lieu of all other warranties expressed or implied including any implied warranty of merchantability or fitness for a particular use Newport Corporation shall not be liable for any indirect special or consequential damages No part of this manual may be reproduced or copied without the prior writ ten approval of Newport Corporation This manual has been provided for information only and product specifica tions are subject to change without notice Any changes will be reflected in future printings QD Newport EDH0191En1011 06 05 ii Experience Solutions 120 amp EQ180 Right Angle Brackets for ILS and IMS Stages Table of Contents A E ii Warnings e iv iv 10 Introduction 1 sss 1 20 Description esurire leptin ett necs 1 2 1 Compatibility eic 2 2 2 Weight of Brackets onions tree cri erre PO RO een Ea da 2 3 0 Squareness Adjustment sss 2 3 1 Adjustment in 2 3 2 Adjustment in Direction 3 4 0 EQ120 Bracket 1 1 seen 3 4 1 Interface Plate Position 3 4 2 Mounting an ILS Stage in Vertical Position sess 4 4 3 Mounting RV Rotation Stage i
12. of mounting screws for RV rotation stages change in accordance with its size RV80 4screws M4 x 20 and wrench supplied RV120 5 screws M5 x 25 and wrench supplied As the rotation stage base is larger than the interface plate press it on flange edges of the bracket Tighten 4 screws 0 4 4 Moving the Interface Plate The bracket is supplied with the interface plate located at the middle position Nevertheless it can be moved to 3 different heights according to your application Remove 4 screws 0 with the wrench supplied Move the interface plate with a mallet to the height needed It must not be taken off between both flanges of the bracket Tighten slightly 4 screws 0 Fix the RV stage on the interface plate screws supplied The quan tity of mounting screws for RV rotation stages change in accordance with its size RV80 4screws M4 x 20 and wrench supplied RV120 5 screws M5 x 25 and wrench supplied As the rotation stage base is larger than the interface plate press it on flange edges of the bracket Lock 4 screws 0 Newport 4 Experience Solutions 120 amp EQ180 Right Angle Brackets for ILS and IMS Stages 4 5 Interface Plate Positions 15 83 402 10 31
13. tion ES A Pulling screw C Pushing screw Flange Flange C U A 9 Setting girder Locking screw Locking screw of the Setting of the ow 5 Unscrew slightly 4 or 6 locking screws with the wrench supplied 4 EQ120 or 6 EQ180 locking screw of the setting Unscrew the screw then screw on the screw with wrenches sup plied Screw on the screw to put its head in contact with the girder Tighten 4 or 6 locking screws 4 Newport EDH0191En1011 06 05 2 Experience Solutions 120 amp 180 Right Angle Brackets for ILS and IMS Stages 3 2 Adjustment in Direction Unscrew slightly 4 or 6 locking screws 4 with the wrench supplied Unscrew the screw 8 then screw on the screw with wrenches sup plied Screw on the screw 8 to put it in contact with the base Tighten 4 or 6 locking screws 4 m EQ120 Bracket 4 1 CY Newport Experience Solutions Direction Mounting holes for oe ies Stages 5 all travel ranges Gi bu 9 L s Mounting holes n 4 5 for RV80 or RV120 S lt Flange 2 x 2 locking screws for the setting Setting girder 2 x 2 screws i to mo nt ws rotation stages interface plate T amp Interface plate 0 nah Mounting holes
Download Pdf Manuals
Related Search