Gigabit Ethernet Multiplexer
Contents
1. Gigabit Ethernet Multiplexerr User s manual www kyopto com Gigabit Ethernet Multiplexer 2 1 25G to 2 5G 3x SFP User s Manual 1 Overview The Gigabit Ethernet Multiplexer aggregates 2 port Gigabit Ethernet into 1 port 2 5G uplink reducing the conversion CAPEX and increasing the fiber utilization effectively The multiplexer can be used either in point to point topology fuctioning as a media converter for transporting two Gigabit Ethernet services over one fiber or in CWDM system working as a wavelength converter for extending the system s transmits sion capacity doubly The multiplexer is equipped with three SFP based ports SFP1 is 2 5G uplink port SFP2 and SFP3 are Gigabit Ethernet service ports The multiplexer must be used in couples 2 Checklist Before you installing the Multiplexer verify that the package contains the following 1 The Gigabit Ethernet Multiplexer 2 AC DC Power Adapter 3 This User s Manual Piease notify your sales representative immediately if any of the aforementioned items is missing or damaged Gigabit Ethernet Multiplexer User s manua www kyopto com 3 LED Description There are five LED At Front of Multiplexer 2 5G Lit when SFP1 speed is 2 5Gbps P1 Lit when SFP1 connection is good Blinks when SFP1 data is transmitting P2 Lit when SFP2 connection is good Blinks when SFP1 data is transmitting P3 Lit when SFP3 connection is good Blinks when SFP3 data is transmi2. ice Service 2 Application 2 Gigabit Ethernet GigabitEthernet Muktiplexert Multiplexer 2 Service 3 Service 1G Fi 1G P2 ea iber p4 P2 2 5G 2 54 e 1G P3 P3 1G Gigabit Ether net GigabitE th er et Service 2 Fiber Service4 CWDM CWDM M uw De mux Mux De mux Gigabit Ethernet Multiplexerr User s manual www kyopto com Gigabit Ethernet Multiplexer User s manua www kyopto com Gigabit Ethernet Multiplexer 2x1 25G to 2 5G User s Manual
3. tting PWR Lit when 5V power is coming up 4 Installing Gigabit Ethernet Multiplexer The multiplexer must be used in couples 1 Attach one 2 5G SFP module to SFP1 Cage on the Multiplexer Attach two 1 25G SFP modules to SFP2 and SFP3 Cage on the Multiplexer 2 Link fiber from the SFP1 on one Multiplexer with SFP1 on another Multiplexer It can link through CWDM system 3 Link fiber from the SFP2 and SFP3 on the Multiplexer to Gigabit Ethernet Service Note SFP2 on one Multiplexer link pass only with SFP2 on another Multiplexer SFP3 on one Multiplexer link pass only with SFP3 on another Multiplexer 4 Connect the power cord to the Multiplexer and check that the Power LED lights up The Px LEDs will light when all the cable connections satisfactory 5 Technical Specifications The Multiplexer conforms to the following standards Standerds IEEE 802 3AB 1000Base T 1000Base SX LX LH Fiber Cable Molti mode 50 125 62 5 125um Single mode 9 125um Data Transfer Rate 2 5Gbps for SFP1 1Gbps for SFP2 and SFP3 LED Indicators Power P1 2 5G P1 Link Act P2 Link Act P3 Link Act Power Requirement 220V 110 245V AC 50Hz Ambient Temperature 0 50 C Humidity 5 90 Dimensions 26x70x93mm HXWxXD 6 Typical Application 1 Application 1 Multiplex er Multiple xer E Fiber 5G 2 rt Gigabit Gig ab it Gigabit Gigabit Ethernet Eth enet Ethernet Ethernet Service S vice Serv
Download Pdf Manuals
Related Search