User Manual
Contents
1. U HH E SAURA Page 26 Original operating instructions Version 1 0 4 dated 2014 09 19 4 6 Assembling the devices 4 6 1 Grinding device for drill bit On the grinding device for the drill bit it is not necessary to disassemble the already existing grinding device for the single edge milling cutter burin Pull the stop 48 out of the bushing and introduce 49 50 is fixed in the collect chuck 30 Eo era gt N IL AE AS I e f Ge n ae A il EZ i dl dle Img 4 5 Device twist drill Version 1 0 4 dated 2014 09 19 Original operating instructions Page 27 4 6 2 Grinding device turning tool In order to assemble the grinding device for milling cutters and turning tools it is necessary to disassemble the grinding device for single edge milling cutters To remove the mounted grinding device for single edge milling cutters burin Release the clamping lever 45 and the knurled screw 46 Pull the grinding device over the dovetail guide Make sure that the V ledge does not fall down If required reset the V ledge for the devices 30 AZ Zu FO N BZ 1 i a QO SA EN Img 4 7 Device HSS turning tool Page 28 Original operating instructions Version 1 0 4 dated 2014 09 19 4 6 3 Grinding device end mill In order to assemble the grinding device for milling cutters and turning tools it is necessary to disassemble the grinding device for single edge millin2. We generally recommend to use a noise protection and a hearing protection Version 1 0 4 dated 2014 09 19 Original operating instructions Page 15 2 11 Dimensions cup wheel Page 16 Original operating instructions Version 1 0 4 dated 2014 09 19 3 Assembly 3 1 Scope of delivery When the machine is delivered check immediately that the machine has not been damaged during transport and that all components are included To do so take all parts out of the packag ing and compare the parts with the figure below to be able to assign the individualparts INFORMATION The machine 101 1008 400V is supplied without machine illumination The machine 101 1008 230V is supplied with machine illumination Img 3 1 Accessories Figure Quan Description No tity Collets type 355E D 28 L 123 35 DIN 6341 Size 4mm 6mm 8mm 10mm 12mm 1 5 or Collets type 385E D 28 L 89 20 DIN 6341 Size 4mm 6mm 8mm 10mm 12mm Corundum cup wheel 100 x 50 x 20 2 1 Diamond cup wheel 100 x 50 x 20 mounted on the machine when delivered 3 1 Spare round belt 4 1 Socket to mount the cup wheels 5 1 Device to regrind turning tools 6 1 Device to regrind end mills 7 1 Device to regrind twist drills 8 1 Clamping ring for the device twist drill 9 1 Clamping piece for the device twist drill Version 1 0 4 dated 2014 09 19 Original operating instructions Page 17 10 1 Crank to clamp the tool collet chuck 11 2 Hook
3. Inform your superiors and BEIPING Maschinen Germany GmbH immediately in the event of accidents possible sources of danger and any actions which almost led to an accident near misses There are many possible causes for near misses The sooner they are notified the faster the causes can be eliminated INFORMATION We highlight specific dangers when performing works on the grinding machine for burins and tools in the description of that work 1 13 Electrical system t Schaltplan Wiring diagram 400V on page 38 c Schaltplan Wiring diagram 230V on page 39 Have the machine and or the electrical equipment checked regularly at least every six months Immediately eliminate all defects such as loose connections defective wires etc A second person must be present during work on live components to disconnect the power in the event of an emergency Immediately disconnect the grinding machine for burins and tools if there are any anomalies in the power supply Version 1 0 4 dated 2014 09 19 Original operating instructions Page 13 2 Technical data The following information are the dimensions and indications of weight and the manufacturer s approved machine data 2 1 Electrical connection 101 1008 230V 101 1008 400V Motor power machine type 400V 3x400 V 50Hz 370 W Motor power
4. Electrical equipment 2006 95 EC and electromagnetic compatibility 2004 108 EC The following harmonized standards were applied DIN EN 12100 1 2003 Safety of machinery electrical equipment of machines Part 1 basic terminol A1 2009 ogy methodology DIN EN 12100 2 2003 Safety of machinery electrical equipment of machines Part 2 technical princi A1 2009 ples and specifications DIN EN 60204 1 Safety of machinery electrical equipment of machines Part 1 general require ments The following technical standards were applied EN 13218 2002 A1 2008 Safety of machine tools stationary grinding machines AC 2010 Original operating instructions Version 1 0 4 2014 09 19 cE EC Declaration of Conformity 101 1008 The manufacturer retailer hereby declares that the following product Product designation 101 1008 Type designation Grinding machine for burins and tools Serial number Year of construction 20 _ all relevant provisions of the Machinery Directive 2006 42 EC corresponds The machine continues to comply with all provisions of the Directives Electrical equipment 2006 95 EC and electromagnetic compatibility 2004 108 EC The following harmonized standards were applied DIN EN 12100 1 2003 Safety of machinery electrical equipment of machines Part 1 basic terminol A1 2009 ogy methodology DIN EN 12100 2 2003 Safety of machinery electrical equipment of machines Part 2 technical princ
5. M6X16 03100121108 03100125108 9 Schraube Screw 3 M4X10 03100121109 03100125109 10 H lse Guide sleeve 1 03100121110 03100125110 Vorrichtung B Fixture B 1 Halter Slide bracket 1 03100121201 03100125201 2 Halterung Fastning set 1 03100121202 03100125202 3 H lse Telescopic cylinder 1 03100121203 03100125203 4 Platte Stator 1 03100121204 03100125204 5 Stange Locate strut 1 03100121205 03100125205 6 Block Fixed block 1 03100121206 03100125206 7 Halter Fastning block 1 03100121207 03100125207 8 Stift Guide pole 1 03100121208 03100125208 9 Schraube Screw 4 M6X25 03100121209 03100125209 10 Schraube Screw 4 M6X16 03100121210 03100125210 11 Schraube Screw 4 M6X10 03100121211 03100125211 12 Spannzange Knife grinder chuck 1 03100121212 03100125212 13 Olnippel Oil cup 1 03100121213 03100125213 14 Schraube Screw 1 M5X20 03100121214 03100125214 15 Sechskantmutter Hexagonal nun 1 M5 03100121215 03100125215 16 Handrad Handle 1 03100121216 03100125216 17 Griff Grip 1 03100121217 03100125217 18 Welle Shaft 1 03100121218 03100125218 Vorrichtung C Fixture C 1 F hrung Guide plate 1 03100121301 03100125301 2 Stange Clamping rod 1 03100121302 03100125302 3 Block Knife block 1 03100121303 03100125303 4 Klemmplatte Clamping block 1 03100121304 03100125304 5 Halter Locate block 1 03100121305 03100125305 6 Welle Fixed shaft 1 03100121306 03100125306 T Welle Shaft 1 03100121307 03100125307 8 Schraube Screw 1 M6X14 03100121308 03100125308 9 Schraube Screw 1 M6X12 031001
6. Spann Complete kit of collets type zangen Typ Typ 385E DIN pane rer yP 6341 0310 012501 385E Gr e 4mm 6mm 8mm size Amm Sm omm 10mm 12mm 10mm 12mm 2 Korund Topfschleifscheibe Corundum cup wheel 0100 x 3100128 100 x 50 x 20 50 x 20 Diamant Topfschleifscheibe Corundum cup wheel 100 x ri 100 x 50 x B20 50 x G20 2 3 Ersatz Rundriemen Spare round belt 0310 0125003 4 Steckschlussel zur Montage Socket to mount the cup 0310 0125004 der Topfschleifscheiben wheels Version 1 0 4 19 September 2014 Originalbetriebsanleitung 35 6 2 Accessories 101 1008 Originalbetriebsanleitung 101 1008 Abb 6 2 Zubehor Accessories Version 1 0 4 19 September 2014 6 2 1Ersatzteilliste Zubehor Spare part list accessories 101 1008 A Artikelnummer 5 Menge Grosse O Bezeichnung Designation Item no o Qty Size 101 1008 Vorrichtung A Fixture A 1 Werkzeughalter Tool holder 1 03100121101 03100125101 2 Einstellschraube Screw Dole 1 03100121102 03100125102 3 Platte Pressure plate 1 03100121103 03100125103 4 Lagerbock Fixed plate 1 03100121104 03100125104 5 Scheibe Flat washer 1 03100121105 03100125105 6 Scheibe Flat washer 1 03100121106 03100125106 7 Sechskantmutter Hexagon nut 2 03100121107 03100125107 8 Schraube Screw 2
7. and maintenance of the grinding machine for burins constitutes a danger for the staff objects and the environment Only authorized staff may operate the grinding machine for burins and tools Persons authorized to operate and maintain should be trained technical personnel and instructed by the ones who are working for the operating company and for the manufacturer The operating company must O O train the personnel instruct the personnel in regular intervals at least once a year on all safety standards that apply to the machine the operation accredited technical guidelines check personnel s state of knowledge document the trainings instructions require personnel to confirm participation in training instructions by means of a signature check whether the personnel is working safety and risk conscious and observe the operat ing instructions OOOO The operator must O have followed a training on the operation of the grinding machine for burins O know the function and performance O before taking the machine in operation have read and understood the operating instructions be familiar with all safety devices and instructions For work on the following parts there are additional requirements O Electrical parts or operating agents shall only be performed by an electrician or under the guidance and supervision of an electrician O Before starting work on electrical parts or operating agents following measu
8. dB A INFORMATION This numerical value was measured on a new machine under proper operating conditions Depending on the age respectively on the wear of the machine it is possible that the noise behaviour of the machine changes Furthermore the factor of the noise emission is also depending on manufacturing influencing factors e g soeed material and clamping conditions INFORMATION The mentioned numerical value is the emission level and not necessarily a safe working level Though there is a dependency between the degree of the noise emission and the degree of the noise disturbance it is not possible to use it reliably to determine if further precaution measures are required or not The following factors influence the actual degree of the noise exposure of the operator O Characteristics of the working area e g size or damping behaviour O Other noise sources e g the number of machines O Other processes taking place in the proximity and the period of time during which the operator is exposed to the noise Furthermore it is possible that the admissible exposure level might be different from country to country due to national regulations This information about the noise emission shall allow the operator of the machine to more eas ily evaluate the endangering and risks CAUTION Depending on the overall noise exposure and the basic limit values the machine operators has to wear an appropriate hearing protection
9. machine type 230V 230 V 50Hz 250 W 2 2 Speed Speed grinding disc diamond disc 5000 min Max grinding speed 35 m s Speed motor 2750 min 2 3 Adjustable angle Vertical rear 0 40 Horizontal taper grinding 0 180 Negative 0 52 Setting positions rotation angle 15 180 2 4 Travels Travel tool holder 140mm Fine adjustment range tool holder 18mm Fine adjustment range length axis 6mm Division scale infeed 0 01mm 2 5 Grinding wheels Corundum cup wheel 100 x 50 x 120 Diamond cup wheel 100 x 50 x 120 2 6 Grinding devices Single edge milling cutter Up to Y 12mm Standard scope of delivery Turning tool Up to 21mm x 21mm Drill bit Up to Y 12mm End mill cutter Up to WM 12mm Standard scope of delivery 2 7 Collet seat 355E DIN 6341 355E DIN 6341 G S20x2 d 20 D 28 j L 137 35 385E 5C DIN 6341 G 26 45 x 1 24 d 31 75 j D 37 5 L 89 20 2 8 Dimensions Height mm 340 Depth mm 450 Width mm 350 Net weight kg 50 2 9 Environmental conditions Temperature 5 35 C Humidity 25 80 Page 14 Original operating instructions Version 1 0 4 dated 2014 09 19 2 10 Emissions The generation of noise emission emitted by the grinding machine for burins is 72 dB A If the grinding machine for burins is installed in an area where various machines are in opera tion the noise exposure immission on the operator of the grinding machine for burins at the working place may exceed 80
10. questions or suggestions for improvement please do not hesi tate to contact our service department If you have any further questions after reading these operating instructions and you are not able to solve your problem with a help of these operating instructions please contact your specialised dealer or directly the company BEIPING Page 4 Original operating instructions Version 1 0 4 dated 2014 09 19 1 Safety 1 1 Representation Conventions gt gives additional advices calls on you to act O enumerations This part of the operating instructions O explains the meaning and use of the warning notices included in these operating instructions O defines the intended use of the grinding machine for burins O points out the dangers that might arise for you or others if these instructions are not observed O informs you about how to avoid dangers In addition to these operation instructions please observe O the applicable laws and regulations O the legal regulations for accident prevention When installing operating maintaining and repairing the grinding machine for burins it is nec essary to observe the European standards The still applicable country specific regulations need to be applied for the not yet for the corre sponding national country law implemented German standards If required it is necessary to take the corresponding measures to comply with the country spe cific regulations before commissioning the grinding
11. that electrical devices include a number of reusable materials as well as compo nents which are harmful to the environment Please help that these components are disposed of separately and professionally In case of doubt please contact your municipal waste man agement company If necessary contact a specialised waste disposal centre to get help for the disposal 7 6 4 Disposal of electrical and electronic components Please make sure that the electrical components are disposed of professionally and according to the legal regulations The machine is composed of electrical and electronic components and must not be disposed of as household waste According to the European directive 2002 96 EC regarding electrical and electronic used devices and the implementation of national legislation used power tools and electrical machines need to be collected separately and supplied to an environmentally friendly recycling centre Being the machine operator you should gather information regarding the authorised collection or disposal system which applies for your company Please make sure that batteries and or accumulators are disposed of in a professional way and according to the legal regulations Please throw empty accumulators only into the collection boxes of retail markets or municipal waste disposal companies Page 42 Original operating instructions Version 1 0 4 dated 2014 09 19 7 7 Disposal via municipal collecting points Disposal of used el
12. wrench size 38 42 to reclamp the collet chuck seat 12 1 Handwheel shaft shoulder 3 2 Storage ATTENTION In case of wrong and improper storage electrical and mechanical machine components might get damaged and destroyed Store packed and unpacked parts only under the intended environmental conditions Follow the instructions and information on the transport case O Fragile goods Goods require careful handling O Protect against moisture and humid environment t Environmental conditions on page 14 O Prescribed position of the packing case Marking of the top surface arrows pointing to the O Maximum stacking height Example not stackable do not stack a second packing case 1 on top of the first one Consult BEIPING Maschinen Germany GmbH if the machine and accessories are stored for more than three months or are stored under different environmental conditions than those given here Information on page 5 Page 18 Original operating instructions Version 1 0 4 dated 2014 09 19 3 3 Installation and assembly 3 3 1 Requirements regarding the installation site INFORMATION In order to attain good functionality and a high processing accuracy as well as a long durability of the machine the installation site should fulfil certain criteria Please observe the following points O The device must only be installed and operated in a dry and well ventilated place O Avoid places nearby machines generating c
13. 1 0310012140 0310012540 41 Ein Aus Schalter Electromagnetic switch 1 0310012141 0310012541 42 Abdeckung Nut cover 1 0310012142 0310012542 43 Platte Driving gasket 1 0310012143 0310012543 44 Dichtung Grease seal 1 0310012144 0310012544 45 Antriebskopf Driving head 1 0310012145 0310012545 46 Klemmmutter Locking round nut 2 0310012146 0310012546 47 Kugellager Bearing 3 0310012147 0310012547 48 Abdeckung Spindle cover 1 0310012148 0310012548 49 Ring Sealing ring 1 0310012149 0310012549 50 Welle Shaft 2 0310012150 0310012550 51 Ring Ring 1 0310012151 0310012551 52 Ring Ring 1 0310012152 0310012552 53 Scheibe Washer 1 0310012153 0310012553 54 Flansch Flange 1 0310012154 0310012554 99 Dichtung Asbestos gasket 2 0310012155 0310012555 56 Schraube Screw 1 M6X25 0310012156 0310012556 57 Dichtung Gasket 1 8 0310012157 0310012557 58 Riemenscheibe Grinding wheel 1 0310012158 0310012558 59 Flansch Flange 1 0310012159 0310012559 60 Schraube Screw 1 0310012160 0310012560 61 Schraube Screw 1 M8X60 0310012161 0310012561 62 Schraube Screw 1 M6X30 0310012162 0310012562 Originalbetriebsanleitung Version 1 0 4 19 September 2014 un Artikelnummer z Menge Grosse O Bezeichnung Designation Item no A Qty Size 101 1008 kompletter Satz Spann Com plete kit of collets type 6341 B 0310 012501 355E Gr e 4mm 6mm 8mm Size 4mm omm 8mm 4 10mm 12mm 10mm 12mm kompletter Satz
14. 18 in order to clamp the shaft of the tool carrier 16 Handwheel 12 for fine setting of the cup wheel 2 by means of the clamping screw 21 Dressing diamond 24 to dress the cup wheel 2 O OODOOOO AZ J Er HSA t AA et A PHH ZR HH OTF IT x Mn iy Ds HO OTH Img 4 2 Grinding machine for burins and tools Version 1 0 4 dated 2014 09 19 Original operating instructions Page 23 4 3 Handling the tool holder The tool which needs to be machined is clamped in the collet chucks 30 The collet chucks are tightened by means of the crank 31 The fine adjustment of the bushing 32 which is located in the collet chuck 30 is performed in axial direction using the knurled screw 33 on the carriage The division of the scale disc 34 is performed in steps of 15 The bolt 35 which fixes the scale disc 34 is held by means of the bayonet locking 36 The scale disc 34 can be freely moved when the bayonet locking 36 is cammed in It is possible to adjust the upper part of the support by means of the screw 37 Read the values from the scale 38 and from the vernier 39 for exact setting If both values of the scale 38 with 39 are set to O the grinding machine for burins is in the basic setting In order to turn the slewing arm 40 at an angle of up to 90 it is necessary to release the clamping lever 41 It is possible to tilt the slewing arm 40 at an angle of up to 40
15. 2014 09 19 Check that prohibition warning and information signs and the labels on the grinding machine for burins O are legible clean them if necessary O are complete replace if necessary INFORMATION Use the following table for organizing the checks General check Emergency stop push button After pressing the EMERGENCY STOP impact switch or the pressure switch OFF the grinding machine for burins stop ON OFF The grinding machine for burins must only be restarted after switch having disconnected and reconnected the mains plug if the ONswitch was pressed again Date Checked by signature Equipment Check OK Protective covers Mounted firmly bolted and not damaged Signs Installed and legible Markings Date Checked by signature Functional test Equipment Check OK Version 1 0 4 dated 2014 09 19 Original operating instructions Page 11 1 9 1 ON Off Switch The switch is provided with an emergency stop function Open the cap of the switch in order to switch on the grinding machine for burins ON Off Switch Img 1 1 ON Off Switch CAUTION After actuating the EMERGENCY STOP button or the ON OFF switch the grinding machine for burins coasts for about 30 seconds 1 9 2 Spark protection The protective cover of the abrasive wheel reduces the number of flying sparks getting into your eyes during machining Use prote
16. 21309 03100125309 10 Schraube Screw 1 M4X8 03100121310 03100125310 11 Halter Fixed block 1 03100121311 03100125311 12 Klemmschraube Lock screw 1 03100121312 03100125312 13 Handrad Lock hander 1 03100121313 03100125313 14 Schraube Limit stop screw 1 03100121314 03100125314 15 Klemmring Lock set 1 03100121315 03100125315 16 Stift Locate strut 1 03100121316 03100125316 17 Klemmhebel Klemmhebel 1 M6 03100121317 03100125317 Version 1 0 4 19 September 2014 Originalbetriebsanleitung oF 400V iagram d iring W Schaltplan 6 3 N E LOZ 60 g 102 60 8 dd anno Perona BunJapuy AE Al AE E AAA ee AA more aa mol Mea DE EEE 3 l8S 9 SYIPU LWL J040W LWL 4J MS 440 U0 UJaNDUIS SNY UlJ SL jus U2Dag E Nig YIDU Yuawyarz nuas ZHOS A00 El a L AE a ME E e ge OO AN e see eee eee N ES Version 1 0 4 19 September 2014 Originalbetriebsanleitung 38 Schaltplan Wiring diagram 230V 6 4 wnjog EE Punysnz 34195 94SUIDU 4 LL jus44JDag E NIQ YIDU Yyawyarz nyas ESTA E A E e AN a E ZHOS A0EZ 39 Originalbetriebsanleitung Version 1 0 4 19 September 2014 7 Annex 7 1 Copyright This document is copyright All derived rights are also reserved especially those of translation re printing use of figures broadcast reproduction by photo mechanical or similar means and recording in data processing systems neither part
17. 2X55 0310012111 0310012511 12 Gewindestift Grub screw 1 0310012112 0310012512 13 Schmiernippel Oil cup 4 6 0310012113 0310012513 14 Unterbau Base 1 0310012114 0310012514 15 Riemen Belt 1 0310012115 0310012515 16 Motor Motor 1 0310012116 0310012516 17 Handrad mit Skala Graduation hand wheel 1 0310012117 0310012517 18 Schraube Screw 2 M6X16 0310012118 0310012518 19 Schraube Screw 2 M6X25 0310012119 0310012519 20 Schraube Screw 3 M6 0310012120 0310012520 21 Schraube Screw 4 M4 0310012121 0310012521 22 Skalenring Upper indicating dial 1 0310012122 0310012522 23 Ring Ring 1 0310012123 0310012523 24 Schraube Screw 1 M8X15 0310012124 0310012524 25 Gewindestift Grub screw 1 0310012125 0310012525 26 Schraube Screw 1 M6X3 0310012126 0310012526 27 Handhebel Locking handle 1 M8X25 0310012127 0310012527 28 Antrieb Grinding unit assembly 1 0310012128 0310012528 29 12 V LED Lampe 12 V LED lamp 1 0310012129 0310012529 30 Motorflansch Motor flange 1 0310012130 0310012530 31 Schraube Screw 7 M5X16 0310012131 0310012531 32 Riemenscheibe Subordinate driving wheel 1 0310012132 0310012532 33 Scheieb Thick gasket 1 0310012133 0310012533 34 Schraube Screw 1 M4X14 0310012134 0310012534 35 Abdeckung Cover 1 0310012135 0310012535 36 Axiallager Thrust ball bearing 2 51100 0310012136 0310012536 37 Stift Pin 1 0310012137 0310012537 38 Halter Holder 1 0310012138 0310012538 39 Klemmschraube Finisher fixing screw 1 0310012139 0310012539 40 Klemmvorrichtung Universal clamp holder
18. Operating manual Version 1 0 4 Grinding machine for burins and tools 101 1008 Table of contents 1 Safety 1 1 Representation Conventions ccccccccsssssseccececceeeeeeeeeeseseeeeececeeeeeeeseeeeseseeeceeeeesessseseeaaeeseeeeeeseeeeeeeeeessaeaas 5 2 Sale INSIFUICTIONS Warning NOLES ii aiii li 6 1 221 Classic a O MONA OS ann ms a ee en Keinen he 6 t22 Ober DICIO ON am ee ee ser else lea like 7 doe ale Usenet Delle lien es Oat ie 7 14 Possible dangers caused by the grinding machine for burins ccccccccoocccnnncccconnnnnnncnonononnnnnnnononancnnnnnos 8 15 Qualification o personnel cosas 8 ESA A O nennen 8 1 5 2 PUTING ZED DE SONO ico 9 1 6 Operatore POSO Secundaria lisis dede 9 1 7 Safety measures during Operation escindida cai ri ale 10 1 8 Daley devices casio 10 LO ea O AA gn 10 KIT an 12 1392 Pa POC e ida Lo et LES 12 1 10 Personal protective equipment for special works cccccoonccccccnnnoncccoononnncononononannnnonnnanononcnnnnnnonannnnnnnnnos 12 LA Sately auna OPI donen aiii 12 1 12 ACeIdeHLIEpor ren 13 ETS ElEeltIcal Systemen een merken 13 2 Technical data 2 1 El cmical connec oN en ee ee ee ee 14 22 E 14 2 3 AQUStable ange an ee ee leere nee here ee 14 24 WAV E 14 25 TAMANO WAS es ld dl loo 14 2 6 Grinding AS e dd i 14 27 A o e nee 14 26 DIMERS OS een ee ee eier een 14 29 EIMIOnmentalcoNdalllons at idas 14 2 102 EMISSIONS a a ee 15 2 11 Dimensions CUD WN
19. adas 16 3 Assembly 3 1 Scope Ol II poca 17 92 SO GE ee A A a eee Eee 18 33 installation andassembiy aii a ae Lu ul 19 3 3 1 Requirements regarding the installation sSite uuuss04444eennnnnnn nennen nennen nnnnnnnnnnnnnnnn nennen nennen 19 9 2 YEIBCIIEAL COMME CON Zee een 19 ASS Zee Ban mas Sara ae dan A ie to SaaS eae ae 19 34 sIPIPSEGOMMMISSIOMING zent ee ee ee neues a 20 4 Operation 4 1 A SER HELEN a a a a a a a 21 42 sASSCMDIV and Uncle ee sehr ale 23 43 Handling th tool MOGs 2 2 2 een 24 4 4 Seltting ihesha ftshoulder a A A deel 25 a PP RI OO ee teten 26 406 ASSEMDIING the CEVICCS lts dd A das 27 4 61 Grinding device TOCA Dita id 27 46 2 Grinding device tuming tool ii IR 28 46 37 Grinding device end Nil ser u A 29 Page 2 Original operating instructions Version 1 0 4 dated 2014 09 19 5 Maintenance 5 1 aaa o A aaaeeaeaeste 30 Sell A A 30 She E A eaten ateaenanceanaaent ata 30 52 Inspeetion and malnlenanee ii a ken klin Een 31 5 2 1 Exchange of the abrasive wheel nase ee ee eine 31 99 RCD AM eis E E ste de i i el ee le 31 6 Ersatzteile Spare parts 6 1 Ersatzteilzeichnung Drawing spare parts cccceccccssseecceeeeecceuseeccaueeeceaecesseueeecsaueeecsuseeessuseessanseeesaaes 33 6 1 1 Ersatzleillste Spare Dan IB u een ee ER 34 6 2 ACCES SOMOS nee an eier 36 62 41 Spare Dalita CESS OES nat Acree Kool ise 37 6 3 Schaltplan Wiring diagram 400V ccsscceecce
20. adt does not grant any further warranties unless they are listed below or had been promised in the frame of a individual contractual agreement O The processing of the liability claims or of the warranty is performed as chosen by BEIPING GmbH either directly or through one of its dealers Any defective products or components of such products will either be repaired or replaced by components which are free from defects The property of replaced prod ucts or components passes on to BEIPING GmbH O The automatically generated original proof of purchase which shows the date of purchase the type of machine and the serial number if applicable is the precondition in order to assert liability or warranty claims If the original proof of purchase is not presented we are not able to perform any services O Defects resulting from the following circumstances are excluded from liability and warranty claims Using the product beyond the technical options and proper use in particular due to over straining of the machine Any defects arising by one s own fault due to faulty operations or if the operating manual is disregarded Inattentive or incorrect handling and use of improper equipment Non authorised modifications and repairs Insufficient installation and safeguarding of the machine Disregarding the installation requirements and conditions of use Atmospheric discharges overvoltage and lightning strokes as well as chemical influ enc
21. ailure on the safety device or if it is not functioning for any reason It is your responsibility If a safety device has been activated the grinding machine for burins must only be used if you O have removed the cause of the failure O have verified that there is no danger resulting for the staff or objects WARNING If you bypass remove or deactivate a safety device in any other way you are endangering yourself and other staff working with the grinding machine for burins and tools The possible consequences are O extremely serious injuries by bursting of the abrasive wheel O injury of eyes due to flying sparks O injury of hands Oa fatal electrocution WARNING The separating protective covers which are made available and delivered together with the machine are designed to reduce the risk of workpieces or fragments of tools or workpieces flying off at high speed however this cannot be completely avoided Always work carefully and observe the limit values of your grinding process 1 9 Safety check Check the grinding machine for burins before each start up or at least once per shift Inform the person responsible immediately of any damage defect or change in operating function Check all safety devices O at the beginning of each shift at continuous operation O once a week with the machine in operation O after every maintenance and repair work Page 10 Original operating instructions Version 1 0 4 dated
22. alfunctions resulting from failure to observe this operating instructions For repairs only use O faultless and suitable tools O only original parts or parts from series expressly authorised by BEIPING Maschinen Ger many GmbH Version 1 0 4 dated 2014 09 19 Original operating instructions Page 31 Page 32 Original operating instructions Version 1 0 4 dated 2014 09 19 yLOZ Jaquiajdas 6 Y 0 L UOISJ A Bunyajuesqal19qjeulblio ce 6 Ersatzteile Spare parts 6 1Ersatzteilzeichnung Drawing spare parts 101 1008 N 19 Abb 6 1 Ersatzteilzeichnung Drawing spare parts 101 1008 34 6 1 1Ersatzteilliste Spare part list 101 1008 0 Artikelnummer Menge Gr sse O Bezeichnung Designation Item no o Qty Size 101 1008 1 Handrad mit Skala Hand scale wheel 1 0310012101 0310012501 2 Schraube Screw 3 M6x12 0310012102 0310012502 3 Skalenring Lower indicatina dial 1 0310012103 0310012503 4 Halter Holder 1 0310012104 0310012504 3 Schraube Screw 2 M8X70 0310012105 0310012505 6 Feder Spring 1 0310012106 0310012506 7 Sechskantmutter Hexagon nut 1 M8 0310012107 0310012507 8 Welle Shaft 1 0310012108 0310012508 9 Maschinenfu Machine foot 4 0310012109 0310012509 10 Abdeckung Cover 1 0310012110 0310012510 11 Handrad Handle 1 M1
23. ay in order to avoid later misuses and endangerment of the environment or persons O Disconnect the machine from the mains O Cut the connecting cable into two O Remove all operating materials from the used device which are harmful to the envi ronment O If required remove the batteries and accumulators O If required disassemble the machine into easy to handle and usable components and parts O Supply the machine components and operating materials to the provided disposal routes 7 6 2 Disposal of the packaging of the new machine All used packaging materials and packaging aids of the machine are recyclable and generally need to be transported to the material recycling The packaging wood can be supplied to the disposal or reuse It is possible to crush any packaging material made of cardboard and supply it to the waste paper collection The films are made of polyethylene PE and the upholstery parts are made of polystyrene PS It is possible to reuse these materials after reconditioning if you supply them to the col lection station or to the responsible waste management company Supply the packaging material only correctly sorted so that it is possible to directly supply it to the reuse 7 6 3 Disposal of the used machine INFORMATION Please take care in your interest and in the interest of the environment that all component parts of the machine are only disposed of in the intended and admitted way Please note
24. by means of an clamping lever 42 It is necessary to tighten the lever 43 in order to fix the tool holder on the shaft The clamping lever 44 fixes the shaft a a al i DH TZ ZE A ur ES Ml ne RES EN SN Sr aN Img 4 3 Tool holder Page 24 Original operating instructions Version 1 0 4 dated 2014 09 19 44 Setting the shaft shoulder Clamp the tool in the collet chuck 30 and release the lever 18 in order to be able to move the shaft 16 The stop of the shaft 16 is set for the tool carrier by means of the handwheel 12 If the hand wheel 12 is turned in the possible rotation movement of the shaft to the stop is being reduced Clamp the clamping lever 44 in order to control the rotation movement o a eee 0 Lye 17772 gt SES N we AAA NS H Version 1 0 4 dated 2014 09 19 Original operating instructions Page 25 45 Grinding angles Set the upper part of the support by means of the scale 38 and the vernier 39 Both values must be set to 0 Release the clamping lever 42 and then tilt the slewing arm 40 at an angle of O degree Then release the clamping lever 18 in order to be able to move the shaft Set the slewing arm 40 to the desired angle by releasing the lever 44 Turn the handwheel 12 in order to set the stop ZZ Sus q MM aaa GLA a m aif E YY MEA de TT o
25. cecceeeeeessssseeeeeeecesceeeaususeeceeeeeceseesesaageseeeeeeeeeeeesssaneas 38 64 Schaltplan Wining diagram 230 V io 39 7 Annex 7 1 NA ee ee ee eee eee ee eee 40 7 2 Temno GIOS SAY cantidad 40 2 3 e ea aon a e 40 LA oc eier Release 40 7 9 biability clalims for d fects warnanya ATE A Ea i 41 76 AdvieeTor disposalf Options Of Te USO neris aaoi rt ln 41 TES DECOMMISSIONINO zen aa aa redobla 42 7 6 2 Disposal of the packaging of the new machine ccccccseseecceeeeeeeeceeeeeessaeeeeeeeeseeeeeaeeeeeesseeeeesaneeeeeeeas 42 7 6 3 Disposal ofthe used machine sans esse ee 42 7 6 4 Disposal of electrical and electronic components c sccccceeeececeesseecceeseceecceseeeceeceeeesseaseeessenseeesens 42 7 7 Disposal via municipal collecting points cccccccsseeeceeceeeeeeeeeeeeeeeeeeeeesseuueeeesaseeeeesaeeeeesseeseeeeesaneeeeess 43 Version 1 0 4 dated 2014 09 19 Original operating instructions Page 3 Preface Dear customer Thank you very much for purchasing a product made by BEIPING Machine BEIPING metal working machines offer a maximum of quality technically optimum solutions and convince by an outstanding price performance ratio Continuous enhancements and product innovations guarantee state of the art products and safety at any time Before commissioning the machine please thoroughly read these operating instructions and get familiar with the machine Please also make sure that all persons operating
26. ctive glasses 1 10 Personal protective equipment for special works Protect your face and eyes wear a safety helmet with facial protection when performing works where your face and eyes are exposed to hazards Wear safety shoes when carrying the grinding machine for burins 1 11 Safety during operation We specially point out the specific dangers when working with and on the grinding machine for burins and tools WARNING Before switching on the grinding machine for burins make sure that there are O no dangers generated for persons O no objects are damaged WARNING Fire and explosion due to sparks O Do not operate the grinding machine for burins and tools nearby combustible or explosive material gt P COOP Avoid any risky working practices O Make sure that nobody is endangered by your work O Wear safety goggles O The instructions mentioned in these operating instructions have to be strictly observed dur ing assembly operation maintenance and repair O Do not work on the grinding machine for burins if your concentration is reduced for exam ple because you are taking medication O Observe the accident prevention regulations issued by your Employers Liability Insurance Association or other competent supervisory authority responsible for your company Page 12 Original operating instructions Version 1 0 4 dated 2014 09 19 O Inform the supervisor about all endangerments or errors 1 12 Accident report
27. devices are installed and activated All failures should be eliminated immediately Stop the grinding machine for burins immediately in the event of any failure in operation and make sure that the grinding machine for burins can not be started up accidentally or without authorization Notify the person responsible immediately of any modification is Safety during operation on page 12 Dressing diamond Diamond disc _ Corundum disc included in the scope of delivery Bayonet locking Clamping screw of the shaft to shift the grinding disc Handwheel to shift the grinding disc Scale Point angle Clamping lever Handwheel to shift the the tool holder ie Hand wheel nd shaft soulder Img 4 1 Grinding machine for burins and tools Version 1 0 4 dated 2014 09 19 Original operating instructions Page 21 Bayonet locking Scale turning angle Crank to clamp the y collet chuck Shaft _ u tool carrier Scale relief angle Page 22 Original operating instructions Version 1 0 4 dated 2014 09 19 4 2 Assembly and function The driving pulley 14 seated on the motor is driven by a round belt 3 the pulley 19 and the spindle Switch Emergency Stop switch 15 to switch the machine on and off Handwheel 17 for axial adjustment of the shaft for the tool holder 16 Handwheel 12 to set the stop of the shaft by means of the tool holder 16 Use the clamping lever
28. ectrical and electronic components Disposal of used electric and electronic devices Applicable in the countries of the European Union and other European countries with a separate collecting system for such devices The sign on the product or on its packing indicates that the product must not be handled as common household waist but that it needs to be delivered to a central collection point for recycling Your contribution to the correct disposal of this product will protect the environment and the health of your fellow men The environment and the health are endangered by incorrect disposal Recycling of material will help to reduce the consumption of raw materials Your Dis trict Office the municipal waste collection station or the shop where you have bought the prod uct will inform you about the recycling of this product 7 8 RoHS 2002 95 EC The sign on the product or on its packaging indicates that this product complies with the European guideline 2002 95 EC Version 1 0 4 dated 2014 09 19 Original operating instructions Page 43 44 cE EC Declaration of Conformity 101 1008 The manufacturer retailer hereby declares that the following product Product designation 101 1008 Type designation Grinding machine for burins and tools Serial number Year of construction 20 _ all relevant provisions of the Machinery Directive 2006 42 EC corresponds The machine continues to comply with all provisions of the Directives
29. es O The following items are as well not subject to the liability or warranty claims Wearing parts and components which are subject to a standard wear as intended such as e g V belts ball bearings illuminants filters sealings etc Non reproducible software errors O Any services which BEIPING GmbH or one of its servants performs in order to fulfil in the frame of an additional guarantee are neither an acceptance of the defects nor an accept ance of its obligation to compensate Such services do neither delay nor interrupt the war ranty period O Place of jurisdiction among traders is Bamberg O If one of the above mentioned agreements is totally or partially inefficient and or null it is considered as agreed what is closest to the will of the warrantor and which remains in the framework of the limits of liability and warranty which are predefined by this contract 7 6 Advice for disposal Options of re use Please dispose of your machine in an environmentally friendly way not by disposing of the waste not in the environment but by acting in a professional way Please do not throw away the packaging and the used machine later on but dispose of your material according to the guidelines established by your municipality or by the responsible waste management company Version 1 0 4 dated 2014 09 19 Original operating instructions Page 41 7 6 1 Decommissioning CAUTION Used devices need to be decommissioned in a professional w
30. ff using the mains plug WARNING Before starting the grinding machine for burins make sure that there exists O no dangers generated for persons O no damage to the grinding machine for burins and tools 5 1 2 Restarting Page 30 Original operating instructions Version 1 0 4 dated 2014 09 19 5 2 Inspection and maintenance The type and extent of wear depends to a large extent on individual usage and service condi tions Regularly clean the grinding machine for burins from grinding dust Soiling by grinding dust in the slideways leads to relevant wear lf necessary use compressed air to clean the grinding machine for burins from grinding dust f you recognize much positive allowance of the slideways fasten the adjustment screws accordingly Lubricate the lubricating nipples in regular intervals 5 2 1 Exchange of the abrasive wheel WARNING Check if the cup wheels are damaged or have cracks before mounting them If a new cup wheel is damaged or shows cracks it must not be mounted in any way 5 3 Repair Request for a service technician of the company BEIPING Maschinen Germany GmbH for all repairs or send us the grinding machine for burins and tools If the repairs are carried out by qualified technical staff they must follow the indications given in these operating instructions The company BEIPING Maschinen Germany GmbH does not take any liability nor does it guarantee against damage and operating m
31. g cutters To remove the mounted grinding device for single edge milling cutters burin Release the clamping lever 45 and the knurled screw 46 gt Pull the grinding device over the dovetail guide Make sure that the V ledge does not fall down If required reset the V ledge for the devices Y AX S S i pl iis E A Img 4 9 Device end mill Version 1 0 4 dated 2014 09 19 Original operating instructions Page 29 5 Maintenance In this chapter you will find important information about O Inspection O Maintenance O Repair of the grinding machine for burins and tools ATTENTION Properly performed regular maintenance is an essential prerequisite for O operational safety O failure free operation O long service life of the grinding machine for burins and O the quality of the products to be manufactured Installations and equipment from other manufacturers must also be in good order and condition 5 1 Safety WARNING The consequences of incorrect maintenance and repair work may include O Heaviest injuries of the persons working on the grinding machine for burins and AN tools O Damages to the grinding machine for burins Only qualified staff should carry out maintenance and repair work on the grinding machine for burins and tools 5 1 1 Preparation WARNING Only carry out work on the grinding machine for burins and tools if it has been switched o
32. hips or dust O The installation site must be free from vibrations also at a distance of presses planing ma chines etc O Any parts sticking out such as stops handles etc have to be secured by measures taken by the customer if necessary in order to avoid endangerment of persons O Provide sufficient space for the staff preparing and operating the machine and transporting the material O Also consider that the machine is accessible for setting and maintenance works Provide for sufficient illumination Minimum value at the working place 300 lux If the illuminance is too little make sure to provide additional illumination INFORMATION The mains plug of the grinding machine for burins must be freely accessible 3 3 2 Electrical connection 3 Qualification of personnel on page 8 Machine type 400V Connect a CEE 400V 16A plug We recommend you to use a CEE 400V 16A plug with pole switch since the rotating field might change when you connect the machine to another outlet gt Make sure to switch to the correct rotation direction The rotation direction arrow is found on the protective cover of the cup wheel 3 3 3 Assembly Turn the handwheel for the shaft shoulder into the seat thread Hand wheel ____ _ ie Img 3 2 Handwheel shaft shoulder Version 1 0 4 dated 2014 09 19 Original operating instructions Page 19 gt Plug the clamping piece and the clamping ring on the device Clamping
33. i A1 2009 ples and specifications DIN EN 60204 1 Safety of machinery electrical equipment of machines Part 1 general require ments The following technical standards were applied EN 13218 2002 A1 2008 Safety of machine tools stationary grinding machines AC 2010 Version 1 0 4 2014 09 19 Original operating instructions 45 index A Accident report uu u u22 82 Ae 13 ASSEMDIN ra 17 C Classification Or hazards re ee 6 D Dangers of the grinding machine u een 8 DISPOSAL sra ee 43 E EC Declaration of Conformity 44 45 Electtical CONNECCION Erna 14 Electrical system A nr on pean Ce Ne A oe 13 INSBECHON ie 30 mended USE e 7 M Maintenance redada 30 Max grinding speed 2222u02202s0nnnnne nennen nenn 14 O Obligations of the operating COMPANY cseeeeeeeteeeeees 9 Of TNE Operator asii ete aaen 9 Operator positions oocccccccccococccnnnccnanncnnnononnns 9 Optional accessories cooonnccnncccnonnnnnnncononancnnnnos 31 P PICIOGFAMS see ee tr 7 Q Qualification of the staff Sale aan erties eee aga er 8 R ICD GIP une ada 30 S Safety GEVIBES een 10 during operation uuunuesnnennnennennnenennennnenn nenn 12 Safety instructions seriene 6 Scope of delivery sissioni 17 SS 0 une esse 14 T Technical data Dimensions ers ee hel a ae 14 Electrical connection ccceecceeeeeeeeeeeeeeneeees 14 EMISSIONS 5 22 nes ern ae 15 Environme
34. ial nor total Subject to technical changes without notice 7 2 Terminology Glossary Term Explanation Protective hood Cover of the grinding disc and of the drive shaft Protective cover Protective hood Spark protection Cover to protect against sparks when grinding Point angle Angle of the complete tip of the drill bit Clearance angle Relief grinding on the drill bit Relief angle Clearance angle on the drill bit Dead centre Tip of the drill bit Prism Tool holder Cutting edge Cutting line of the drill bit 7 3 Change information manual Chapter Short note new version no 2 Type of collet from 5C to 355E S20X2 d 20 1 0 1 all Manual expanded with 230V machine type 1 0 1 all Manual expanded with machine type PP U3 1 0 2 3 1 Note delivery PP U3 without machine lighting circuit dia 1 0 3 gram 400V updated 7 Spare parts 1 0 4 7 4 Product follow up We have a follow up service for our products which extends even after shipment We would be grateful if you could send us the following information O Modified settings O Experiences with the grinding machine for burins and tools which could be important to other users O Recurring failures Page 40 Original operating instructions Version 1 0 4 dated 2014 09 19 7 5 Liability claims for defects warranty Beside the legal liability claims for defects of the customer towards the seller the manufacturer of the product BEIPING GmbH Robert Pfleger S traBe 26 D 96103 Hallst
35. isk as the grinding machine for burins operates with O at high speeds O rotating parts O with an abrasive wheel flying sparks O with electrical voltages and currents We have used construction resources and safety techniques to minimize the health risk for the staff resulting from these hazards If the grinding machine for burins is used and maintained by the staff who are not duly qualified there may be a risk resulting from incorrect or unsuitable maintenance of the grinding machine for burins INFORMATION All staff involved in assembly commissioning operation and maintenance must O be duly qualified O strictly follow these operating instructions In the event of intended use O there may be a risk to the persons O there may be a risk to the grinding machine for burins and other material values O the correct function of the grinding machine for burins may be affected Always disconnect the mains plug from the socket before performing any cleaning or mainte nance works 1 5 Qualification of personnel 1 5 1 Target group This manual is addressed to Oo the operating companies O the operators O the staff for maintenance works Therefore the warning notes refer to both operation and maintenance staff of the grinding machine for burins Determine clearly and explicitly who will be responsible for the different activities on the machine operation maintenance and repair Unclear responsibilities c
36. machine for burins Please keep this documentation always close to the grinding machine for burins Version 1 0 4 dated 2014 09 19 Original operating instructions Page 5 1 2 Safety instructions warning notes 1 2 1 Classification of hazards We classify the safety instructions into different levels The table below gives an overview of the classification of symbols pictograms and signal words for the specific danger and its possible consequences Pictogram Signal word Definition Consequences DANGER Imminent danger that will cause severe injury of death to the staff A danger that might cause severe injury to the staff or can lead to death WARNING AN Danger of unsafe procedure that might cause injury to the staff or property CAUTION damages Situation that could cause damage to the machine and products and other types of damage ATTENTION No risk of injury to the staff Application tips and other important or useful information and notes No dangerous or harmful consequences for the staff or objects INFORMATION In case of specific dangers we replace the pictogram by A general danger by a warning of injury of hands hazardous rotating parts electrical voltage Page 6 Original operating instructions Version 1 0 4 dated 2014 09 19 1 2 2 Other pictograms Warning of flammable sub gt es I Disconnect the mains plug Activation forbidden Use protec
37. ntal conditions ccceeeeeeeeeees 14 max grinding speed 2uuuus22usuonenen nennen nen 14 SPEC aan 14 W WVALAING MOLES eier 6 Ai 14 Page 46 Original operating instructions Version 1 0 4 dated 2014 09 19
38. onstitute a safety risk The qualifications of the staff for the different tasks are mentioned below Operator The operator is instructed by the operating company about the assigned tasks and possible risks in case of improper behaviour Any tasks which need to be performed beyond the opera tion in the standard mode must only be performed by the operator if it is indicated in these instructions and if the operating company expressively commissioned the operator Electrical specialist Due to his professional training knowledge and experience as well as his knowledge of respec tive standards and regulations the electrical specialist is able to perform works on the electrical system and to recognise and avoid any possible dangers himself Page 8 Original operating instructions Version 1 0 4 dated 2014 09 19 Version 1 0 4 dated 2014 09 19 The electrical specialist is specially trained for the working environment in which he is working and knows the relevant standards and regulations Specialist staff Due to its professional training knowledge and experience as well as his knowledge of rele vant regulations the specialist staff is able to perform the assigned tasks and to recognise and avoid any possible dangers himself Instructed persons Instructed persons were instructed by the operating company about the assigned tasks and any possible risks in case of improper behaviour 1 5 2 Authorized personnel WARNING Incorrect use
39. res are to be performed in the following order gt Disconnect all poles Secure against switching on gt Check if the machine is zero potential 1 6 Operators positions The operator s position is in front of the grinding machine for burins Original operating instructions Obligations of the of the operat ing company Obligations of the operator Additional requirements regarding the qualification Page 9 INFORMATION The mains plug of the grinding machine for burins must be freely accessible 1 7 Safety measures during operation CAUTION Risk by inhaling health hazardous dusts and fogs Depending on the materials which need to be treated and the agents which are used dusts and fogs may be generated which endanger your health Make sure that the generated health hazardous dusts and fogs are safely sucked off at the place of origin and that they are dissipated or filtered To do so use a suitable extraction unit CAUTION Risk of fire and explosion by using inflammable materials or cooling lubricating agents Before processing inflammable materials e g aluminium magnesium or using inflammable auxiliary materials e g spirit it is necessary to take additional preventive measures in order to safely avoid health risks 1 8 Safety devices Use the grinding machine for burins only with properly functioning safety devices Stop the grinding machine for burins immediately if there is a f
40. ring te Clamping piece aa Img 3 3 Device drill bit 3 4 First commissioning ATTENTION Before commissioning the machine check all screws fixtures and the clamping lever and tighten up the screws if necessary CAUTION The cup wheel might get damaged during transportation Let the grinding machine for burins and tools run in for about 15 minutes before you start grinding t Personal protective equipment for special works on page 12 Page 20 Original operating instructions Version 1 0 4 dated 2014 09 19 4 Operation This grinding machine is generally designed to grind a single edge milling cutters burins but it is also Suitable to manufacture stamps electrodes or round grinding parts and for regrinding of end mills on the face With the help of the workpiece supports which are available as accesso ries it is possible to grind round tool bits milling cutters and drill bits By means of the versatile slewing and setting options all requirements are covered in order to grind a graver with any cutter shape e g cylindrical conical centric and eccentric radii Fur thermore it is possible to create polygones 3 to 24 edge on stamps and electrodes 4 1 Safety Operate the grinding machine for burins only under the following conditions O The grinding machine for burins is in proper working order O The grinding machine for burins is used as intended O Follow the operating instructions O All safety
41. the machine have read and understood the operating instructions beforehand Keep these operating instructions in a safe place nearby the machine Information The operating instructions include indications for safety relevant and proper installation operation and main tenance of the machine The continuous observance of all notes included in this manual guarantee the safety of persons and of the machine The manual determines the intended use of the machine and includes all necessary information for its eco nomic operation as well as its long service life In the paragraph Maintenance all maintenance works and functional tests are described which the operator must perform in regular intervals The illustration and information included in the present manual can possibly deviate from the current state of construction of your machine Being the manufacturer we are continuously seeking for improvements and renewal of the products Therefore changes might be performed without prior notice The illustrations of the machine may be different from the illustrations in these instructions with regard to a few details However this does not have any influence on the operability of the machine Therefore no claims may be derived from the indications and descriptions Changes and errors are reserved Your suggestion with regard to these operating instructions are an important contribution to optimising our work which we offer to our customers For any
42. tive glasses Use protective boots T X Contact address Protect the environment 1 3 Intended use Use The grinding machine for burins is designed and manufactured to be used in a non explosive environment The grinding machine for burins must only be used to manufacture single edge milling cutters stamps and to regrind tools cutting tools such as end milling cutters drills TIG welding electrodes etc If the grinding machine for burins is used in any way other than described above modified with The machine out the approval of the company BEIPING Maschinen Germany GmbH or used in any other is no longer way then the grinding machine for burins is being used improperly used as pre ibed We do not take any liability for damages caused by improper use epee We expressly point out that the guarantee or CE conformity will expire due to any constructive technical or procedural changes which had not been performed by the company BEIPING Maschinen Germany GmbH lt is also part of intended use that you observe the operating values and setting of the data grinding machine for burins observe the operating instructions observe the inspection and maintenance instructions Booo Technical data on page 14 Version 1 0 4 dated 2014 09 19 Original operating instructions Page 7 1 4 Possible dangers caused by the grinding machine for burins The grinding machine for burins is state of the art Nevertheless there is a residual r
Download Pdf Manuals
Related Search