CLS PiXelbar 36
Contents
1. Press Menu again to confirm it 10 Control all LED fixtures in the same channel default 11 Control all LED fixtures independently S20 Master off default 21 Master 30 RGB 3 channels Default 31 RGB dimming strobe 5 channel DMX mode 30 Ch 1 Red LED single or group Ch 2 Green LED single or group Ch 3 Blue LED single or group DMX mode 31 Ch 1 Red LED single or group Ch 2 Green LED single or group Ch 3 Blue LED single or group Ch 4 Master Ch 5 Strobe 01 255 slow fast The slave units must be set on DMX add 001 when running the Master Slave function The Slave unit follows the Master unit s functions When the PiXelbar 36 is in slave mode and receiving DMX from the Master unit the display shows and the DMX LED is burning 6 www cls led com CLS PiXelbar 36 CHANGING THE LENSES OF THE PIXELBAR 36 Step 1 Make sure no power is connected to the unit Step 2 Remove the side plate of the Pixelbar 36 Step 3 Slide out the front cover plate of the Pixelbar 36 Step 4 Carefully remove the lenses By removing the lenses from the lens holders with a small flat screwdriver Be sure that the lens holder stays on the PCB see pictures P Step 5 Change the lenses in the lens holders Note When mounting the 25 x 45 lens be sure to mount the lens in the correct way the vertical stripes of the lens have to be at a right angle to the PiXelbar Step 6 Slide2. back the front cover plate Step 7 Mount back the side plate and make sure the screws are firmly tightened D oe A Creative Lighting Solutions TECHNICAL SPECIFICATIONS Input voltage Power consumption LEDs Colour Lens beam angle Weight Shipping weight Dimensions Shipping dimensions Working temperature Communication Housing Application area IP value 100 240 VAC max 120 VA 36 x Luxeon RGB 25 optional 25 x 45 lenses 3 8 kg 4 5 kg 81 x 795 x 77 mm hxwxd 130 x 830 x 150 mm hxwxd 10 C to 40 C DMX 512 1990 3 pin XLR First grade aluminum black coated Indoor use only IP20 2007 CLS LED BV All rights reserved Information subject to change without notice CLS LED BV and all affiliated companies disclaim liability for injury damage direct or indirect loss consequential or economic loss or any other loss occasioned by the use of inability to use or reliance on the information contained in this manual No part of this manual may be reproduced in any form or by any means without permission in writing from CLS LED BV Other legal information can be found in our General conditions to be found on the back of your CLS LED BV invoice or on our website www cls led com Conditions pdf 8 www cls led com
3. 3 seconds The display will light up When none of the buttons are in use for 30 seconds the display will turn off This will automatically lock the button functionality DMX address settings For setting up a DMX address press Menu until you see 3 numbers The display shows the DMX address Press Up and Down to select the desired address from 001 512 STAND ALONE There are two possibilities to use the CLS PiXelbar in a stand alone mode 1 Fixed colour There are 20 built in fixed colours Press Menu until the display shows C01 Press Up and Down to select the desired colour from CO1 C20 2 Fade program There are 9 built in fade programs Press Menu until the display shows F01 Press Up and Down to select the desired program from F01 F09 The fade time of the program can be changed from 01 99 0 5 50 sec To change the fade times press and hold the menu button The display now shows S hold the button until the display shows two numbers The fade time can be adjusted from 01 99 by pressing Up and Down To confirm and activate speed settings press Menu again Add 001 Menu C01 FO1 lt 7 Fade Menu Down Up OOO Creative Lighting Solutions DMX mode setting Before selecting the DMX modes first disconnect the DMX XLR connector See page 5 for the lock functionality if the display is off Press Menu until the display shows S Press Up and Down to select the desired program from 01 31
4. CLS Manuals CLS PiXelbar 36 INTRODUCTION Thank you for selecting the CLS PiXelbar 36 The CLS PiXelbar 36 is a universal DMX controlled luminary that uses 36 Luxeon LEDs to create an even light output Its numerous rigging facilities makes it the perfect choice for rental companies worldwide Creative Lighting Solutions The CLS PiXelbar 36 features e Built in electronic power supply e DMX input amp output e DMX 512 controlable e 20 built in fixed colours e 9 built in fade programs Included items The CLS PixXelbar 36 is shipped in one package containing the following items e 1 CLS PiXelbar 36 item nr 875600 e 1 neutrik input power connection plug item nr 946411 e 2 floor brackets item nr 875750 e 1 user manual Optional accessories e 25 lens standard mounted on the fixture item nr 875700 e CLS PiXelbar optional 25 x 45 lens item nr 875705 e CLS PiXelbar optional lens holder 25 25 x 45 item nr 875720 e Diffuser frost filter item nr 875730 e PiXelbar floor bracket item nr 875750 s Special G clamp with wingbolt black item nr 875760 CLS PiXel ba r 36 e CLS Omega bracket for eee of PiXelbar item nr 704811 e CLS cable 80cm XLR 3P complete item nr 911200 e CLS cable 1 5mtr XLR 3P complete item nr 911201 e CLS cable 3mtr XLR 3P complete item nr 911203 e CLS cable 5mtr XLR 3P complete item nr 911205 e CLS cable 10mtr XLR 3P complete item nr 911206 e CLS cable 15m
5. exceeds 40 C oI P 4 4 4 4 NG JE JE 9 gt p P i OLOKO KOKLO LOLO LOLOL oS t e Operate in a well ventilated area Protection from injury due to falls e Verify that all covers and mounting hardware is securely fastened e Block the access below the work area whenever installing or removing the unit Wiring diagram OPERATION DETERMINATIONS The CLS PiXelbar 36 is made for indoor use only If the unit has been exposed to drastic temperature changes do not switch it on immediately The arising condensation might damage your unit Leave the unit switched off till it has reached room temperature Only operate the unit after having checked the housing Make sure it is firmly closed and the screws fastened tightly Do not shake the CLS PiXelbar 36 Avoid brute force when installing or operating the CLS PiXelbar 36 Operate the CLS PiXelbar 36 only after having familiarized with its functions Do not permit operation by persons who are not qualified for operating the CLS PiXelbar 36 Most damages are the result of unprofessional operation The maximum ambient temperature of 40 degrees must never be exceeded Please consider that unauthorized modifications on the CLS PiXelbar 36 are forbidden due to safety reasons Creative Lighting Solutions a ae wuww cls led com CLS PiXelbar 36 OPERATION Lock functionality When the display is off the button functionality is locked To unlock press the menu button and hold it for
6. tr XLR 3P complete item nr 911207 e CLS cable 20mtr XLR 3P complete item nr 911209 NOTE It is important to read this manual before you install ore use this product Version 1 2 March 2009 Creative Lighting Solutions ot wwuw cls led com Creative Lighting Solutions 2 www cls led com CLS PiXelbar 36 SAFETY INFORMATION INSTALLATION Warning This product is for professional use only Unplug from the mains before installation Mount the brackets on the fixture Connect the AC power cord Read this manual before powering up or installing the CLS PiXelbar 36 Follow the instructions to the socket listed below and observe all warnings in this manual Dimensions Protection from electric shock e Disconnect the power supply from AC power before installing dismounting or maintaining the unit e Make sure all connectors are connected properly e Use only a source of AC power that complies with local building and electrical codes e Do not expose the unit to rain or moisture e Refer all service to a qualified technician camloc camloc 765 mm Protection from burns and fire E e Provide a clearance of at least 50 mm around the unit e Do not install the CLS PiXelbar 36 near a heat source e Do not install the CLS PiXelbar 36 in a corrosive flammable or explosive area e Do not modify the CLS PixXelbar 36 or install other than genuine parts AF TAS OO OO OS OT e Do not operate the unit if the ambient temperature
Download Pdf Manuals
Related Search