user manual Washing Machine
Contents
1.2. The drain hose may be extended to a maximum of 4 metres An additional drain hose and joining piece is available from your local Service Centre Electrical connection Information on the electrical connection is A The manufacturer does not accept given on the rating plate on the inner edge of any responsibility for damage or the appliance door injury through failure to comply with Check that your domestic electrical installa the above safety precaution tion can take the maximum load required al so taking into account any other appliances A The power supply cable must be Muse easily accessible after installing the machine Connect the machine to an earthed socket 26 electrolux Should the appliance power supply cable need to be replaced this must be carried out by a Service Centre Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please contact your local council your household waste disposal service or the shop where you purc
3. noise compared with other traditional motors This new motor en usual noise sures a softer start and more even distribution of the laundry in the drum when spinning as well as increased stability of the machine No water is visible in the Machines based on modern technology operate very economically drum using very little water without affecting performance If you are unable to identify or solve the prob lem contact our service centre Before tele phoning make a note of the model serial number and purchase date of your machine the Service Centre will require this informa tion electrolux 21 IMIG con soe bee rOC MING Eee Technical data Dimensions Width 60 cm Height 82 cm Depth door included 54 cm Electrical connection Information on the electrical connection is given on the rating plate on the inner edge of the appliance door Water supply pressure Minimum 0 05 MPa Maximum 0 8 MPa Maximum Load Cotton 6 kg Spin Speed Maximum 1400 rpm Consumption values Programme Energy consumption Water consumption Programme duration seal os Minutes White Cottons 90 Cottons 60 i2 53 For the duration of o 1 Cotton ECO 60 1 1 02 52 the programmes Cottons 40 0 7 58 please refer to the 5 display on the con Synthetics 40 0 5 40 trol panel Delicates 40 0 55 56 Wool Handwash 30 0 25 58 1 Cottons Eco at 60 C with a load of 6 kg is the reference programme for the data entered in the energy lab
4. with the appliance gt aV w The inlet hose must not be lengthened If it is too short and you do not wish to move the tap you will have to purchase a new longer hose specially designed for this type of use Water stop device The inlet hose is provided with a water stop device which protects against damage caused by water leaks in the hose which could develop due to natural ageing of the hose This fault is shown by a red sector in the window A Should this occur turn the water tap off and refer to your Service Centre to replace the hose Water drainage The end of the drain hose can be positioned in three ways electrolux 25 Hooked over the edge of a sink using In a sink drain pipe branch This branch the plastic hose guide supplied with the must be above the trap so that the bend is machine In this case make sure the end at least 60 cm above the ground cannot come unhooked when the ma e Directly into a drain pipe at a height of chine is emptying This could be done by not less than 60 cm and not more than 90 tying it to the tap with a piece of string or cm The end of the drain hose must always be ventilated i e the inside diameter of the drain pipe must be larger than the outside diameter of the drain hose The drain hose must not be kinked attaching it to the wall
5. Door Child Lock any laundry in the machine to remove any manufacturing residue from the drum and tub Pour 1 2 a measure of detergent into the main wash com partment and start the machine By pressing these 2 buttons again the acoustic signal is reactivated Child safety lock This device permits you to leave the appli ance unattended and not to worry that chil dren might be injured by or cause damage to the appliance This function remains enabled 8 electrolux also when the washing machine is not work ing There are two different ways to set this op tion 1 Before pressing button 8 it will be im possible to start the machine 2 After pressing button 8 it will be impos sible to change any other programme or option Daily use Load the laundry Open the door by carefully pulling the door handle outwards Place the laundry in the drum one item at a time shaking them out as much as possible Close the door Measure out the detergent and the fab ric softener Pull out the dispenser drawer until it stops Measure out the amount of detergent re quired pour it into the main wash compart ment LU or in the appropriate compartment if the selected programme option it requires see more details in Detergent dispenser drawer To enable or disable this option press simul taneously for about 6 seconds buttons 5 and 6 until on the display the icon 5 appears or disappears If required pou
6. El kil j z The display shows the following information 7 1 e Duration of the selected programme After selecting a programme the duration is displayed in hours and minutes for ex ample 2 05 The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric After the programme has started the time remaining is updated every minute e Delayed start The Selected delay set by pressing the rel evant button appears on the display for a few seconds then the duration of the se lected programme is displayed again e Alarm codes In the event of operating problems some alarm codes can be displayed for example E20 see paragraph What to do if e Incorrect option selection wa If an option which is not compatible with the set wash programme is selected the message Err is displayed at the bottom of the display for a few seconds and the in tegrated red light of button 8 start flashing e End of programme When the programme has finished three flashing zeros are displayed the pilot light 9 and the pilot light of button 8 go out and the door can be opened 7 2 Washing programme phase icons e Wash LIV e Rinses EI e Drain ki e Spin By selecting the wash programme the pro gramme phase icons corresponding to the various phases making up the programme are shown in the bottom part of the display After having pressed button 8 only the icon of the runni
7. kg Delicate washing programme suitable for silk and mixed synthetic items RINSES Rinses Maximum spin speed 1400 rom Max load 6 kg With this programme it is possible to rinse and spin cot ton garments which have been washed by hand The machine performs 3 rinses followed by a final long spin The spin speed can be reduced DRAIN Draining of water Max load 6 kg For emptying out the water of the last rinse in pro grammes with the RINSE HOLD and NO SPIN option selected SPIN NO SPIN RINSE HOLD SPIN NO SPIN RINSE HOLD SPIN NO SPIN RINSE HOLD NO SPIN RINSE HOLD SPIN NO SPIN RINSE HOLD EASY IRON EXTRA RINSE Detergent Com partment 8E 8E 8E E Programme Maximum and Minimum Temperature Cycle Description Maximum Spin Speed Maximum Fabrics Load Type of Laundry SPIN Drain and long spin Maximum spin speed 1400 rpm Max load 6 kg electrolux 15 Detergent Com partment SPIN Separate spin for hand washed garments and after pro grammes with the RINSE HOLD and NO SPIN option selected You can choose the spin speed by pressing the relevant button to adapt it to the fabrics to be spun O OFF For cancelling the programme which is running or to switch the machine off 1 If you select the Super Quick option by pressing button 10 we recommend that you reduce the maximum load as indicated Red load reduced load Full loading is possible however with somewhat
8. maximum spin speed provided for that programme Press button 3 repeatedly to change the spin speed if you want your laundry to be spun at a different speed The relevant light illumi nates Select the available option by pressing buttons 3 4 and 5 Depending on the selected programme dif ferent functions can be combined before pressing the button 8 By selecting an option the relevant pilot light illuminates If an incorrect option is selected the integra ted red pilot light of the button 8 flashes 3 times and the Err message appears on the display for few seconds electrolux 9 For compatibility among the washing programmes and the options see chap ter Washing Programmes Select the Delay Start by pressing button 6 Before you start the programme if you wish to delay the start press the button 6 repeat edly to select the desired delay The relevant pilot light goes on The selected delay time value up to 20 hours will appear on the display a few sec onds then the duration of the programme will appear again You must select this option after you have set the programme and before you press button You can cancel or modify the delay time at any moment before you press button 8 Selecting the delayed start 1 Select the programme and the required options 2 Select the delay start by pressing the but ton 6 3 Press button 8 the machine starts its hourly count down The programme wi
9. normally soiled items TIME MANAGER SYNTHETICS PREWASH SPIN LJ 2 60 Cold NO SPIN uij Prewash Main wash Rinses RINSE HOLD Maximum spin speed 900 rom EASY IRON Max load 3 kg Red load 1 5 kg EXTRA RINSE Synthetic or mixed fabrics with prewash phase TIME MANAGER heavily soiled items DELICATES NO SPIN wij 40 Cold RINSE HOLD amp Main wash Rinses EXTRA RINSE Maximum spin speed 700 rom TIME MANAGER Max load kg 8 Red load kg 1 5 1 Delicate fabrics normally soiled delicate items 14 electrolux Programme Maximum and Minimum Temperature Cycle Description Maximum Spin Speed Maximum Fabrics Load Type of Laundry WOOL 40 Cold Main wash Rinses Maximum spin speed 900 rom Max load 2 kg Washing programme for machine washable wool as well as for hand washable woollens and delicate fabrics Note A single or bulky item may cause imbalance If the appliance doesn t perform the final spin phase add more items redistribute the load manually and then se lect the spinning programme HANDWASH 40 Cold Main wash Rinses Maximum spin speed 900 rom Max load 2 kg Special programme for delicate fabrics with hand washing care symbol LINGERIE 40 Main wash Rinses Maximum spin speed 900 rom Max load 1 kg This programme is suitable for very delicate items as lingerie bras and underwear etc SILK 30 Main wash Rinses Maximum spin speed 700 rom Max load 1
10. simple maintenance or oversights which can be Frost precautions If the machine is installed in a place where the temperature could drop below O C proceed as follows 1 Turn off the water tap 2 Unscrew the inlet hose 3 Place the end of the emergency emptying hose and that of the inlet hose in a bowl placed on the floor and let water drain out 4 Screw the water inlet hose back on and reposition the emergency emptying hose after having put the cap on again 5 When you intend to start the machine up again make sure that the room temper ature is above 0 C Emergency emptying out If the water is not discharged proceed as follows to empty out the machine 1 pull out the plug from the power socket 2 close the water tap 3 if necessary wait until the water has cooled down 4 place a bowl on the floor and place the end of the emergency emptying hose into the bowl Remove its cap The water should drain by gravity into the bowl When the bowl is full put the cap back on the hose Empty the bowl Repeat the procedure until water stops flowing out 5 clean the pump if necessary as previously described 6 replace the emergency emptying hose in its seat after having plugged it 7 screw the pump again solved easily without calling out an engineer Before contacting your local Service Centre please carry out the checks listed below During machine operation it is possible that the red pilot light of bu
11. the water please read the para graph At the end of the programme Easy Iron By selecting this option the laundry is gently washed and spun to avoid any creasing In this way ironing is easier Furthermore the machine will perform some additional rinses in some programmes On cotton pro grammes the maximum spin speed is re duced automatically Extra Rinse This appliance is designed for saving energy If it necessary to rinse the laundry using an extra quantity of water extra rinse select this option Some additional rinses will be performed This option is recommended for people who are allergic to detergents and in areas where the water is very soft Delay Start The programme can be delayed from 30 min 60 min 90 min 2 hours and then by 1 hour 6 electrolux up to a maximum of 20 hours by means of this button Start Pause This button allows you to start or to interrupt the selected programme Time Manager These buttons allows you to modify the pro gramme duration automatically proposed by the appliance Door locked pilot light The pilot light 9 illuminates when the pro gramme starts and indicates if the door can be opened Display e light on the door cannot be opened The machine in working or has stopped with water left in the tub e light off the door can be opened The pro gramme is finished or the water has been emptied out e light flashing the door is opening cs T 8 o
12. N NO SPIN RINSE HOLD EASY IRON EXTRA RINSE TIME MANAGER E Programme Maximum and Minimum Temperature Cycle Description Maximum Spin Speed Maximum Fabrics Load Type of Laundry electrolux 13 Detergent Com partment COTTONS ECONOMY SPIN uy 90 40 NO SPIN amp Main wash Rinses RINSE HOLD Maximum spin speed 1400 rpm EASY IRON Max load 6 kg EXTRA RINSE White and fast coloured cotton This programme can be selected for slightly or normally soiled cotton items The temperature will decrease and the washing time will be extended This allows to obtain a good washing efficiency so saving energy COTTONS PREWASH SPIN LJ 2 90 Cold NO SPIN uij Prewash Main wash Rinses RINSE HOLD Maximum spin speed 1400 rom EASY IRON Max load 6 kg Red load 3 kg 1 EXTRA RINSE White or coloured cottons with prewash phase TIME MANAGER heavily soiled items COTTONS ECONOMY PREWASH SPIN LL 2 90 40 NO SPIN uij Prewash Main wash Rinses RINSE HOLD amp Maximum spin speed 1400 rom EASY IRON Max load 6 kg EXTRA RINSE White or coloured cottons with prewash phase This programme can be selected for normally soiled cotton items with stains The temperature will decrease and the washing time will be extended SYNTHETICS SPIN Uy 60 Cold NO SPIN amp Main wash Rinses RINSE HOLD Maximum spin speed 900 rom EASY IRON Max load 3 kg Red load 1 5 kg 7 EXTRA RINSE Synthetic or mixed fabrics
13. Thinking oF yor_ user manual Electrolux Washing Machine EWG 14550 W 2 electrolux Electrolux Thinking of you Share more of our thinking at www electrolux com Contents Safety information Product description Control panel First use Personalisation Daily use Helpful hints and tips Washing programmes CE A Safety information Important Read carefully amp keep for future reference ND J O1 B N hi e The safety of Your appliance complies with the industry standards and with legal re quirements on the safety of appliances However as manufacturers we feel it is our duty to provide the following safety notes e It is most important that this instruction book should be retained with the appli ance for future reference Should the ap pliance be sold or transferred to another owner or should you move house and leave the appliance always ensure that the book is supplied with the appliance in or der that the new owner can get to know the functioning of the appliance and the relevant warnings e You MUST read them carefully before in stalling or using the appliance e Before first starting up check the appli ance for any damage incurred during transport Never connect up a damaged appliance If parts are damaged contact your supplier e f the appliance is delivered in the winter months when there are minus tempera tures Store it at room temperature for 24 hours before using for the f
14. e programme selector dial to O 2 Select the draining or spinning pro gramme 3 Reduce the spin speed if needed by pressing the relevant button 4 Press button 8 At the end of the programme the door is re leased and can be opened Turn the pro Helpful hints and tips Sorting out the laundry Follow the wash code symbols on each gar ment label and the manufacturer s washing instructions Sort the laundry as follows whites coloureds synthetics delicates woollens Before loading the laundry Never wash whites and coloureds together Whites may lose their whiteness in the wash New coloured items may run in the first wash they should therefore be washed separately the first time Button up pillowcases close zip fasteners hooks and poppers Tie any belts or long tapes Remove persistent stains before washing Rub particularly soiled areas with a special detergent or detergent paste Treat curtains with special care Remove hooks or tie them up in a bag or net Removing stains Stubborn stains may not be removed by just water and detergent It is therefore advisable to treat them prior to washing Blood treat fresh stains with cold water For dried stains soak overnight in water with a 1 do not use acetone on artificial silk electrolux 11 gramme selector dial to O to switch the ma chine off Remove the laundry from the drum and care fully check that the drum is empty If you do not int
15. ected the correct temperature Excessive laundry load e Reduce the laundry load The programme is still running e Wait the end of washing cycle The door lock has not been released e Wait until the pilot light 9 goes off There is water in the drum e Select drain or spin programme to empty out the water The door will not open The transit bolts and packing have not been removed e Check the correct installation of the appliance The support feet have not been adjusted The machine vibrates is Check the correct levelling of the appliance noisy The laundry is not evenly distributed in the drum e Redistribute the laundry Maybe there is very little laundry in the drum e Load more laundry The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum The laundry is redis tributed by reverse rotation of the drum This may happen several times before the unbalance disappears and normal spinning can re sume If after 10 minutes the laundry is still not evenly distributed in the drum the machine will not spin In this case redistribute the load manually and select the spin programme e Redistribute the laundry The load is too small e Add more items redistribute the load manually and then select the spinning programme Spinning starts late or the machine does not spin The machine is fitted with a type of motor which makes an unusual The machine makes an un
16. ed regularly 1 Remove the detergent dispenser drawer by pulling it firmly Remove any traces of accumulated powder To aid cleaning the top part of the additive compartment should be removed 16 electrolux 2 Remove the conditioner insert from the 6 Insert the detergent dispenser drawer in appropriate compartment the guide rails and push it in Washing drum Rust deposits in the drum may occur due to rusting foreign bodies in the washing or tap water containing iron Important Do not clean the drum with acidic descaling agents scouring agents containing chlorine or iron or steel wool 1 Remove any rust deposits on the drum with a cleaning agent for stainless steel 2 Runawashing cycle without any washing to clean off any cleaning agent residues Programme Short Cotton Programme at maximum temperature and add approx 1 4 measuring cup of detergent Door seal Check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold 3 Clean all parts with water 4 Put the conditioner insert in as far as it will go so that it is firmly in place 5 Clean all parts of the machine especially the nozzles in the top of the washing in chamber with a brush electrolux 17 Drain pump The pump should be inspected regularly and particularly if e the machine does not empty and or spin e the machine makes an unusual noise dur ing draining due to objects such as saf
17. el in compliance with EEC 92 75 standards i The consumption data shown on this chart is to be considered purely indicative as it may vary depending on the quantity and type of laundry on the inlet water temperature and on the ambient temperature 22 electrolux Installation Unpacking All transit bolts and packing must be re moved before using the appliance You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again 1 After removing all the packaging carefully lay machine on it s back to remove the polystyrene base from the bottom 8 Unscrew and remove the central rear bolt A with the supplied spanner Slide out 2 Remove the power supply cable the the relevant plastic spacer draining hose and inlet hose if mounted from the hose holders on the rear of the appliance 4 Unscrew and remove the two large rear bolts B and the six smaller bolts C 5 Remove the bracket D and tighten up the six smaller bolts electrolux 23 6 Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet Positioning Install the machine on a flat hard floor Make sure
18. end to carry out another wash close the water tap Leave the door open to pre vent the formation of mildew and unpleasant smells Stand By If your laundry is not removed within 10 minutes after the programme is fin ished the back light of the display switches off and the energy saving system will be en abled Only the pilot light of the button 8 is blinking to indicate that the appliance has to be switched off By pressing any button the appliance will come out from the energy sav ing status and you can set another pro gramme or switch the appliance off special detergent then rub in the soap and water Oil based paint moisten with benzine stain remover lay the garment on a soft cloth and dab the stain treat several times Dried grease stains moisten with turpen tine lay the garment on a soft surface and dab the stain with the fingertios and a cotton cloth Rust oxalic acid dissolved in hot water or a rust removing product used cold Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole Mould stains treat with bleach rinse well whites and fast coloureds only Grass soap lightly and treat with bleach whites and fast coloureds only Ball point pen and glue moisten with ace tone lay the garment on a soft cloth and dab the stain Lipstick moisten with acetone as above then treat stains with methylated spirits Treat any
19. ety D pins coins etc blocking the pump N amp Proceed as follows 1 Disconnect the appliance 2 If necessary wait until the water has cooled down 6 Remove any objects from the pump im peller by rotating it 3 Place a container close to the pump to collect any spillage 4 Pull out the emergency emptying hose B place it in the container and remove its cap cover 7 Putthe cap back on the emergency emp tying hose and place the latter back in its seat Screw the pump fully in 5 When no more water comes out un 8 screw the pump cover A and remove it Always keep a rag nearby to dry up spillage of water when removing the pump 18 electrolux A Warning When the appliance is in use and depending on the programme selected there can be hot water in the pump Never remove the pump cover during a wash cycle always wait until the appliance has finished the cycle and is empty When replacing the cover ensure it is securely re tightened so as to stop leaks and young children being able to remove it Cleaning the water inlet filter If you notice that the machine is taking longer to fill check that the filter in the water inlet hose is not blocked 1 Turn off the water tap 2 Unscrew the hose from the tap 3 Clean the filter in the hose with a stiff brush 4 Screw the hose back onto the tap What to do if 0o Certain problems are due to lack of
20. hased the product Packaging materials The materials marked with the symbol are recyclable gt PE lt polyethylene gt PS lt polystyrene gt PP lt polypropylene Building in This appliance has been designed to be built into the kitchen furniture The recess should have the dimensions shown in picture A Preparation and assembly of the door The machine is originally prearranged for the assembly of a door opening from right to left This means that they can be recycled by dis posing of them properly in appropriate col lection containers Ecological hints To save water energy and to help protect the environment we recommend that you follow these tips e Normally soiled laundry may be washed without prewashing in order to save deter gent water and time the environment is protected tool e The machine works more economically if it is fully loaded e With adequate pre treatment stains and limited soiling can be removed the laundry can then be washed at a lower tempera ture e Measure out detergent according to the water hardness the degree of soiling and the quantity of laundry being washed In this case it is sufficient to screw inthe hing es 1 and the counter magnet 6 provided with the appliance at the right level Fig B a Door The dimensions of the door should be width 595 598 mm thickness 16 22 mm The height C Fig C depends on the height of the adjacent furniture
21. hose is squashed or kinked E20 e Check the drain hose connection The drain filter is clogged E20 The machine does not emp ty and or does not spin e Clean the drain filter An option or a programme that ends with the water still in the tub or a that eliminates all the spinning phases has been selected e Select the draining or spinning programme The laundry is not evenly distributed in the drum e Redistribute the laundry Too much detergent or unsuitable detergent creates too much foam has been used e Reduce the detergent quantity or use another one Check whether there are any leaks from one of the inlet hose fittings It is not always easy to see this as the water runs down the hose check to see if it is damp There is water on the floor e Check the water inlet hose connection The drain or inlet hose is damaged e Replace it with a new one The cap on the emergency emptying hose has not been replaced or the filter has not been properly screwed in after cleaning action e Refit the cap on the emergency emptying hose or screw the filter fully in 20 electrolux Possible cause Solution Too little detergent or unsuitable detergent has been used e Increase the detergent quantity or use another one Stubborn stains have not been treated prior to washing Unsatisfactory washing re Use commercial products to treat the stubborn stains sults The correct temperature was not selected Check if you have sel
22. irst time General safety e Itis dangerous to alter the specifications or attempt to modify this product in any way Care and cleaning 15 What to do if 18 Technical data 21 Consumption values 21 Installation 22 Electrical connection 25 Environment concerns 26 Building in 26 Subject to change without notice e During high temperature wash pro grammes the door glass may get hot Do not touch it e Make sure that small pets do not climb into the drum To avoid this please check into the drum before using e Any objects such as coins safety pins nails screws stones or any other hard sharp material can cause extensive dam age and must not be placed into the ma chine e Only use the advised quantities of fabric softener and detergent Damage to the fabric can ensue if you over fill Refer to the manufacturer s recommendations of quantities e Wash small items such as socks laces washable belts etc in a washing bag or pil low case as it is possible for such items to slip down between the tub and the inner drum e Do not use your washing machine to wash articles with whalebones material without hems or torn material e Always unplug the appliance and turn off the water supply after use cleaning and maintenance e Under no circumstances should you at tempt to repair the machine yourself Re pairs carried out by inexperienced people may cause injury or serious malfunction ing Contact your local Service Cen
23. ll start after the se lected delay has expired Cancelling the delayed start after having pressed button 8 1 Set the washing machine to PAUSE by pressing button 8 2 Press button 6 once until the symbol 0 is displayed 3 Press button 8 again to start the pro gramme Important The selected delay can be changed only after selecting the washing programme again The Delay Start can not be selected with DRAIN programme Start the programme by pressing button 8 To start the selected programme press the button 8 the green pilot light of the button 8 stops blinking To interrupt a programme which is running press the button 8 the green pilot light starts blinking To restart the programme from the point at which it was interrupted press the button 8 10 electrolux again If you have chosen a delayed start the machine will begin the countdown If an incorrect option is selected the red pilot light of the button 8 blinks for 3 times the message Err is displayed for a few seconds Select the Time Manager option by pressing buttons 10 By pressing these buttons repeatedly the duration of the washing cycle can be in creased or decreased The soil level icon will appear on the display to indicate the chosen degree of soil This option is available only with Cotton Synthetic and Delicate pro grammes Soil Level Icon Type of fabric Intensive F For heavy soiled items Normal For normal soiled i
24. mme which is running the corresponding green pilot light starts blinking Press the button again to restart the pro gramme Cancelling a programme Turn the selector dial to O to cancel a pro gramme which is running You can select now a new programme Opening the door After the programme has started or during the delay time the door is locked if you need to open it set first the machine to PAUSE by pressing the button 8 After a few minutes the pilot light 9 goes out and it is possible to open the door If this pilot light remains lit this means that the machine is already heating or that the water level is too high In any case do not try to force the door If you cannot open the door but you need to open it you have to switch the machine off by turning the selector dial to O After a few mi nutes the door can be opened pay atten tion to the water level and tempera ture After closing the door it is necessary to se lect the programme and options again and to press button 8 At the end of the programme The machine stops automatically Three blinking 0 00 appear on the display and the pilot light of button 8 goes off Some acoustic signals sound If a programme or an option that ends with water left in the tub has been selected the door remains locked to indicate that the wa ter must be emptied out before opening the door Follow the below instructions to empty out the water 1 Turn th
25. ng phase stays on 7 3 Heating phase During the washing cycle the display shows a temperature icon indicating that the appli ance has started the heating phase of the water in the tub 7 4 Soil degree icons When selecting a programme on the display appears an icon indicating the degree of soil ing automatically proposed by the machine Table of symbols oH Ka Cottons ojo Economy L Cottons Prewash oe L Economy Prewash A Synthetics B Synthetics Prewash Bs Delicates KS Wool Bi Handwash s Lingerie ae Silk Rinses First use e Ensure that the electrical and water connections comply with the installa tion instructions e Remove the polystyrene block and any material from the drum e Before the first wash run a cotton cy cle at the highest temperature without Personalisation Acoustic signals The machine is provided with an acoustic device which sounds in the following cases e at the end of the cycle e if there is a fault By pressing the 4 and 5 buttons simultane ously for about 6 seconds the acoustic signal is deactivated except if there is a fault electrolux 7 Intensive Normal Daily Light Quick Super Quick T 7 5 Child safety lock This device permits you to leave the appli ance unattended during it s functioning bd Drain Spin X Cold Wash J Temperature Spin reduction Rinse Hold No Spin B Easy iron Extra Rinse Delay Start oF Time Manager
26. o not overload the appliance See the Washing Programme Table Before washing ensure that all pockets are empty and buttons and zips are fas tened Avoid washing frayed or torn arti cles and treat stains such as paint ink rust and grass before washing Under wired bras must NOT be machine washed Garments which have been in contact with volatile petroleum products should not be machine washed If volatile cleaning fluids are used care should be taken to ensure that the fluid is removed from the garment before placing in the machine electrolux 3 e Never pull the power supply cable to re move the plug from the socket always take hold of the plug itself e Never use the appliance if the power sup ply cable the control panel the working surface or the base are damaged so that the inside of the washing machine is ac cessible Child safety e This appliance is not intended for use by person including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or in struction concerning use of the appliance by a person responsible for their safety The packaging components e g plastic film polystyrene can be dangerous to chil dren danger of suffocation Keep them out of children s reach Keep all detergents in a safe place out of children s reach Make sure that children or pets do not climb into the drum To prevent child
27. r fabric softener into the com partment marked amp the amount used must not exceed the MAX mark in the drawer Close the drawer gently Select the required programme by turning the programme selector dial 1 Turn the programme selector dial to the re quired programme The washing machine will propose a temperature and automatically select the maximum spin value provided for the programme you have chosen You can change these values by operating the corre sponding buttons The green pilot light of the button 8 starts to flash The selector dial can be turned either clock wise or counterclockwise Turn to position O to reset programme Switching the ma chine off At the end of the programme the selec tor dial must be turned to position to switch the machine off A Caution If you turn the programme selector dial to another programme when the machine is working the red pilot light of button 8 will blink 3 times and the message Err is displayed to indicate a wrong selection The machine will not perform the new selected programme Select the temperature by pressing button 2 By selecting a programme the appliance proposes automatically a default tempera ture Press this button repeatedly to increase or decrease the temperature if you want your laundry to be washed at a different temper ature Reduce the spin speed by pressing button 3 By selecting a programme the appliance proposes automatically the
28. reduced cleaning results 2 If using liquid detergents a programme without PREWASH must be selected Care and cleaning Warning You must disconnect the appliance from the electricity supply before you can carry out any cleaning or maintenance work Descaling The water we use normally contains lime It is a good idea to periodically use a water softening powder in the machine Do this separately from any laundry washing and according to the softening powder manufac turer s instructions This will help to prevent the formation of lime deposits After each wash Leave the door open for a while This helps to prevent mould and stagnant smells form ing inside the appliance Keeping the door open after a wash will also help to preserve the door seal Maintenance wash With the use of low temperature washes it is possible to get a build up of residues inside the drum We recommend that a maintenance wash be performed on a regular basis To run a maintenance wash e The drum should be empty of laundry e Select the hottest cotton wash pro gramme e Use anormal measure of detergent must be a powder with biological properties External cleaning Clean the exterior cabinet of the appliance with soap and water only and then dry thor oughly Important Do not use methylated spirits solvents or similar products to clean the cabinet Cleaning the dispenser drawer The detergent dispenser drawer should be clean
29. ren and pets becoming trapped inside the drum the machine incorporates a special feature To activate this device rotate the button without pressing it inside the door clockwise until the groove is horizontal If necessary use a coin To disable this device and restore the pos sibility of closing the door rotate the but ton counterclockwise until the groove is vertical 4 electrolux Product description i Your new appliance meets all modern requirements for effective treatment of laundry with low water energy and detergent consumption Its new washing system allows total use of detergent and reduces water consumption so saving energy Detergent dispenser drawer Control panel Door opening handle Detergent dispenser drawer LU Compartment for detergent used for pre wash and soak phase or for stain remover used during the stain action phase if availa ble The prewash and soak detergent is added at the beginning of the wash pro gramme The stain remover is added during the stain action phase UUJ Compartment for powder or liquid deter gent used for main wash If using liquid de tergent pour it just before starting the pro gramme amp Compartment for liquid additives fabric softener starch Follow the product manufacturer s recom mendations on quantities to use and do not exceed the MAX mark in the detergent dispenser drawer An
30. residual marks with bleach Red wine soak in water and detergent rinse and treat with acetic or citric acid then rinse Treat any residual marks with bleach Ink depending on the type of ink moisten the fabric first with acetone then with acetic 12 electrolux acid treat any residual marks on white fab rics with bleach and then rinse thoroughly Tar stains first treat with stain remover me thylated spirits or benzine then rub with de tergent paste Detergents and additives Good washing results also depend on the choice of detergent and use of the correct quantities to avoid waste and protect the en vironment Although biodegradable detergents contain substances which in large quantities can upset the delicate balance of nature The choice of detergent will depend on the type of fabric delicates woollens cottons etc the colour washing temperature and degree of soiling All commonly available washing machine de tergents may be used in this appliance e powder detergents for all types of fabric powder detergents for delicate fabrics 60 C max and woollens e liquid detergents preferably for low tem perature wash programmes 60 C max for all types of fabric or special for wool lens only The detergent and any additives must be placed in the appropriate compartments of the dispenser drawer before starting the wash programme If using liquid detergents a programme without prewa
31. s base b Hinges To mount the hinges it is necessary to drill two holes dia 35 mm depth 12 5 14 mm depending on the depth of door furniture on the inner side of the door The distance be tween the holes hobs fixing centres must be 416 mm The distance B from upper edge of the door to the centre of the hole depends on the ad jacent furniture s dimensions The required dimensions are given in the pic ture C The hinges will be fixed to the door by means of screws for wood 2 Fig B supplied with the appliance c Mounting the door Fix the hinges 1 to the machine by means of the M 5x15 screws 3 Fig B The hinges can be adjusted to compensate for possible uneven thickness of the door To align the door perfectly it is necessary to loosen the screw 3 Fig B adjust the door and tighten the screw again d Counter magnet 6 The appliance is prearranged for a magnetic closure of the door To enable a correct operation of this device it is necessary to screw the counter magnet 6 steel disk rubber ring into the inner side of the door Its position must correspond to the magnet 4 on the appliance see picture D electrolux 27 If the door has to be opened from left to right invert the position of the plates 7 the mag net 4 and the plate 5 Fig B and E Mount the counter magnet 6 and the hinges 1 as previously described www electrolux com 132957250 00 092009
32. sh must be selected Washing programmes Programme Maximum and Minimum Temperature Cycle Description Maximum Spin Speed Maximum Fabrics Load Type of Laundry COTTONS 90 Cold Main wash Rinses Maximum spin speed 1400 rpm Max load 6 kg Red load 3 kg White and coloured cotton normally soiled items Your appliance incorporates a recirculation system which allows an optimal use of the concentrated detergent Follow the product manufacturer s recom mendations on quantities to use and do not exceed the MAX mark in the detergent dispenser drawer Quantity of detergent to be used The type and quantity of detergent will de pend on the type of fabric load size degree of soiling and hardness of the water used Follow the product manufacturers instruc tions on quantities to use Use less detergent if e you are washing a small load e the laundry is lightly soiled e large amounts of foam form during wash ing Degrees of water hardness Water hardness is classified in so called de grees of hardness Information on hardness of the water in your area can be obtained from the relevant water supply company or from your local authority If the water hard ness degree is medium or high we suggest you to add a water softener following always the manufacturer s instructions When the degree of hardness is soft readjust the quan tity of the detergent Detergent Com partment SPI
33. tems Daily For daily soiled items Light CT For slightly soiled items Quick ren For very slightly soiled items For items used or worn for a short time Super Quick T 1 We recommend you to reduce the load sizes see Washing programmes table Important The Time Manager cannot be selected with the Economy programmes The availability of these soil level icons change according to the type of fabric as shown in the following chart Fabric Soil Level Cottons 95 90 C DC X x X CN EX 60 C 50 C x x X X PR X 40 C DO X X X X 30 C x X X X x IX Cold Mm e X X amp Synthetics 60 C 50 C Xa EC ex X 40 C x x X X 80 C DC EC XK X Cold EXC EXC X Delicates Fabric Soil Level 40 C mM x x X 30 C X NX X X Cold XXX X Altering an option or a running programme It is possible to change some options before the programme carries them out Before you make any change you must PAUSE the appliance by pressing the button 8 if you wish to change the Time Manager option you must cancel the running pro gramme and make your selection again Changing a running programme is possible only by resetting it Turn the programme se lector dial to O and then to the new pro gramme position Start the new programme by pressing the button 8 again The washing water in the tub will be not emptied out Interrupting a programme Press the button 8 to interrupt a progra
34. that air circulation around the machine is not impeded by carpets rugs etc Check that the machine does not touch the wall or other kitchen units Level the washing ma chine by raising or lowering the feet The feet may be tight to adjust as they incorporate a self locking nut but the machine MUST be level and stable If necessary check the set ting with a spirit level Any necessary adjust ment can be made with a spanner Accurate levelling prevents vibration noise and displacement of the machine during op eration 24 electrolux A Caution Never place cardboard wood or similar materials under the machine to compensate for any unevenness in the floor After having levelled the appliance tighten the lock nuts Water inlet An inlet hose is supplied and can been found inside the machine drum Do not use the hose from your previous machine to connect to the water supply Important This appliance must be con nected to a cold water supply 1 Open the porthole and extract the inlet hose 2 Connect the hose with the angled con nection to the machine Do not place the inlet hose downwards Angle the hose to the left or right depending on the position of your water tap 3 Set the hose correctly by loosening the ring nut After positioning the inlet hose be sure to tighten the ring nut again to prevent leaks 4 Connect the hose to a tap with a 3 4 thread Always use the hose supplied
35. tre Al ways insist on genuine spare parts Installation Use This appliance is heavy Care should be taken when moving it When unpacking the appliance check that it is not damaged If in doubt do not use it and contact the Service Centre All packing and transit bolts must be re moved before use Serious damage can occur to the product and to property if this is not adhered to See relevant section in the user manual After having installed the appliance check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable against the wall If the machine is situated on a carpeted floor please adjust the feet in order to al low air to circulate freely under the appli ance Always be sure that there is no water leak age from hoses and their connections after the installation If the appliance is installed in a location subject to frost please read the dangers of freezing chapter Any plumbing work required to install this appliance should be carried out by a quali fied plumber or competent person Any electrical work required to install this appliance should be carried out by a quali fied electrician or competent person This appliance is designed for domestic use It must not be used for purposes other than those for which it was designed Only wash fabrics which are designed to be machine washed Follow the instruc tions on each garment label D
36. tton 8 blinks one of the following alarm codes appears on the display and some acoustic signals sound ev ery 20 seconds to indicate that the machine is not working electrolux 19 eE 10 problem with the water supply e F L problem with the water draining EYE door open Once the problem has been eliminated press the button 8 to restart the programme If after all checks the problem persists con tact your local Service Centre Possible cause Solution The door has not been closed E40 e Close the door firmly The plug is not properly inserted in the power socket e Insert the plug into the power socket There is no power at the socket e Please check your domestic electrical installation The main fuse has blown The machine does not start e Replace the fuse The selector dial is not correctly positioned and the button 8 has not been pressed e Please turn the selector dial and press the button 8 again The delay start has been selected e lf the laundry are to be washed immediately cancel the delay start The Child Safety Lock has been activated e Deactivate the Child Safety Lock The water tap is closed E10 e Open the water tap The inlet hose is squashed or kinked E10 The machine does not fill e Check the inlet hose connection The filter in the inlet hose is blocked E10 e Clean the water inlet hose filter The door is not properly closed E40 e Close the door firmly The drain
37. y fabric softener or starching additives must be poured into the compartment before starting the wash pro gramme Rating Plate Drain pump ll Adjustable feet Control panel electrolux 5 Below is a picture of the control panel It shows the programme selector dial as well as the buttons pilot light and the display These are presented by relevant numbers on the following pages 00000 00000 m Programme selector dial TEMPERATURE button SPIN reduction button EASY IRON button EXTRA RINSE button FA DELAY START button Display EJ START PAUSE button EX DOOR LOCKED pilot light TIME MANAGER buttons Programme Selector Dial It allows you to switch the appliance on off and or to select a programme Temperature This button allows you to increase or de crease the washing temperature Spin Reduction By pressing this button you can change the spin speed of the selected programme or to select Rinse Hold or No Spin option No spin By selecting this option all spinning phases are suppressed and replaced by a drain so as not to wrinkle the laundry Recommended for extremely delicate fabrics On some pro grammes the rinses will be performed with more water Rinse hold By selecting this function the water of the last rinse is not emptied out to prevent the fabrics from creasing Before opening the door it will be necessary to empty out the water To empty out
Download Pdf Manuals
Related Search