TT-1510 - Numark
Contents
1. Professional Disc Jockey Products TT 1510 Belt Drive Turntable USER S MANUAL 2000 Numark Industries http www numark com TT1510 Safety Information CAUTION AN AN DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ANY COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanvina this appliance CAUTION FOR USA amp CANADIAN MODELS ONLY TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE SAFE TY INSTRUCTIONS Read Instructions All the safety and operating instructions should be read before this product is connected and used 2 Retain Instructions The safety and operating instructions should be kept for future reference 3 Heed Warnings All warnings on this product and in these operating instructions should be followed 4 Follow Instructions All operating and2. in an easy to use design Thank you for purchasing a Numark Product and enjoy the mix TABLE OF CONTENTS Safety Information Contents of this package Product Registration A 1 Main Unit Introduction 2 Turntable platter with belt attached Diagram and Parts Description 3 Turntable mat 4 Dust cover 5 45 rpm adapter 6 Counterweight A f 7 Headshell 1 Operating Instructions cartridge attached on certain models 8 Operating instructions 1 Specifications 9 Registration Card 1 Assembly Warranty and Service Product Registration Please record the serial number of your unit as shown on the back of the chassis as well as the name of the dealer from whom you purchased the unit Retain this information and your original purchase receipt for your records Please return the enclosed warranty card to register your unit with us MODEL PURCHASED FROM SERIAL NUMBER DATE OF PURCHASE Numark The Leader in DJ Technology 2000 Numark Industries 3 http www numark com TT1510 Na PARTS DESCRIPTION 1 45 rpm Adapter 10 2 Anti static slip mat 11 3 Center Spindle 12 4 Stroboscope 13 5 Start Stop Button 14 6 Speed Select Button 15 7 Strobe Dots 16 8 Adjustable Feet 17 9 Power Button 18 ASSEMBLY Headshell Pitch Control Slider Tonearm Arm Rest Cueing Lever Anti skating Knob Counterweight Hinge For Dust Cover Belt Drive Spindle 1 Remove the main unit wi
3. must pay al for a period equal to the remainder of the original Limited Warranty on the origina equipment become the property of NUMARK If NUMARK determines that any m charges for the repair or return of such mixer What are MIXERS INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHAN OF THIS LIMITED WARRANTY EXCEPT TO THE EXTEN CONSEQUENTIAL INDIRECT OR What are NUMARK S obligations During the applicable warranty period NUMARK will repair or replace at NUMARK sole discretion wi defective component part of the mixer To obtain service under this Limited Warranty purchaser must first contact NUMARK and obtain a thout cha return au n where ti ARK S so rge to the purchaser any horization number iner for shipping accompanied by purchaser s sales receipt or comparable proof of sale name and address To obtain an RA and assistance 0 o return the mixer contact e discretion use rebuilt mixers will be warranted mponents boards and parts shipping and labor the limits on NUMARKS liabilities THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY TOGETHER WITH ANY IMPLIED WARRANTIES COVERING NUMARK TABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIM T PROHIBITED BY APPLICABLE LAW NUMARK SHALL NOT BE LIABLE FOR ANY SPECIAL INCIDENTAL SIMILAR DAMAGES LOSS OF PROFITS DAMAGES TO PURCHASER S PROPERTY OR INJURY TO PURCHASER OR OTHERS ARISING ITED TO THE DURATION OUT OF THE USE MISUSE OR INABILITY TO USE ANY NUMARK
4. other instructions should be followed 5 Water and Moisture This product should be kept away from direct contact with liquids 6 Heat Avoid placing this product to close to any high heat sources such as radiators 7 Ventilation The appliance should be situated so that it s location or position does not interfere with it s proper ventilation For example the appliance should not be situated on a bed sofa rug or similar surface that may block the ventilation opening or placed in a built installation such as bookcase or cabinet that may impede the flow of air through the ventilation openings 8 Power Sources This product should be connected to a power supply only of the type described in these operating instructions or as marked on the unit 9 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked upon or pinched by items placed on or against them When removing the cord from a power outlet be sure to remove it by holding the plug attachment and not by pulling on the cord 10 Object and Liquid Entry Take care that objects do not fall into and that liquids are not spilled into the inside of the mixer 11 Cleaning The appliance should be cleaned only as recommended by the manufacturer 12 Non use Periods The power cord of the appliance should be unplugged from the outlet when left unused for long periods of time 13 Damag
5. 00 Web www numark com
6. ARK S product pricing reflects this allocation of risk and the limitations of and dealers of NUMARK are not authorized to make modifications to this Limited Warranty or ingly additional statements such as dealer advertising or presentation whether oral or written do not constitute SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR R EXCLUSIONS MAY NOT APPLY TO PURCHASER ghts which vary from one jurisdiction to another uipment to be repaired under warranty One additional outer layer of packaging must be included to ensure product safety Failure to do so may inadequately protect the equipment in transit and Numark will not return repaired merchandise to customers by priority service unless by written request at the customer s cost Requests must be submitted in a A Return Authorization number must be obtained from Numark through the address or phone numbers below b A copy of the original sales receipt must also be included for the eq c The faulty equipment must be packed in its original packaging d therefore jeopardize the customer s warranty e Numark will not accept COD shipments and no call tags will be issued for merchandise return f writing with merchandise returned 9 The defective Numark eguipment should be sent FREIGHT PREPAID with Return Authorization number clearly printed on the outer packaging and original sales Phone 1 401 295 9000 Fax 1 401 295 52
7. MIXER BREACH OF WARRANTY OR NEGLIGENCE INCLUDING BUT NOT LIMITED TO NUMARK S OWN NEGLIGENCE EVEN IF NUMARK OR ITS AGENT HAS BEEN ADVISED OF SUCH DAMAGES OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY THIS LIMITED WARRANTY IS THE COMPLETE WARRANTY FOR NU LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE O REMEDY IF ANY PORTION OF THIS LIMITED WARRAN UNENFORCEABILTY SHALL NOT AFFECT WILL ALWAYS BE CONSTRUED TO BE LIM This Limited Warranty a liability contained in this make additional warran ITED BY ITS TERMS OR AS LIMITE Limited Warranty The agents employees distributors ies binding on NUMARK Accord warranties by NUMARK and should not be relied upon How does state law apply to this warranty HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATIONS O This Limited Warranty gives you specific legal rights You may also have other ri RETURN INFORMATION receipt enclosed to Numark INDUSTRIES Attention Service Department 11 Helmsman Avenue North Kingstown RI 02852 USA ARK S MIXERS AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES THIS RIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER S EXCLUSIVE TY IS ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW SUCH PARTIAL ILLEGALITY OR THE ENFORCEABILITY OF THE RE MAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND D AS THE LAW PERMITS locates risk of product failure between purchaser and NUMARK and NUM
8. Right channel Green R Right channel b Install the cartridge to the headshell and tighten it with screws provided with the cartridge Insert the headshell into the front end of the tonearm then turn the locking nut clockwise with the head shell firmly held horizontally a Slide counterweight onto the rear of the tonearm Twist it lightly and it will screw onto the rear shaft of the tonearm _j rons N N Counterweight Numark The Leader in DJ Technology 2000 Numark Industries 5 http Awww numark com TT1510 10 Adjustment of horizontal zero 0 balance with stylus pressure and anti Skating Remove the stylus protector Do not touch the stylus tip during the adjustment Set the cueing lever to the lower position so it does not effect tone arm height Release the arm clamp and lift the tonearm from the armrest so it moves freely Rotate the counterweight until the tonearm is approximately balanced horizontally floats freely Pa e Refasten the tonearm with the arm clamp A f Hold the counterweight stationary with one hand and rotate only the stylus t ao Ff 4 LIAN pressure ring to bring the number O of the ring into alignment with the center line on the tonearm rear shaft g Rotate the counterweight with scale ring clockwise to the correct stylus pressure following the manufacturer s recommendation h Setthe anti skating control knob to the same value as the s
9. e Requiring Service Only qualified personnel should service this product If you have any questions about service please contact Numark at the number s shown on the back cover of this manual 14 Grounding or Polarization Precautions should be taken so that the grounding or polarization means built into the CD player is not defeated 15 Internal External Voltage Selectors Internal or external voltage selector switches if any should only be reset and re equipped with a proper plug for alternative voltage by a qualified service technician Do not attempt to alter this yourself WARNING To reduce the risk of fire or electrical shock do not expose this appliance to rain or moisture Electrical equipment should NEVER be kept or stored in damp environments SERVICE INSTRUCTIONS Disconnect power cord before servicing Replace critical components only with factory parts or recommended equivalents For AC line powered units Before returning repaired unit to user use an ohmmeter to measure from both AC plug blades to all exposed metallic parts The resistance should be no more than 100 000ohms Numark The Leader in DJ Technology 2000 Numark Industries http www numark com TT1510 Numark TT 1510 PROFESSIONAL BELT DRIVE TURNTABLE CONGRATULATIONS You have just purchased the Numark TT1510 Professional Belt Drive Turntable This unit has been design to provide years of reliable operation
10. ord and play begins To suspend play lift tone arm with cueing lever 10 When play is finished raise the cueing lever move the tonearm to the armrest and secure the tonearm with the arm clamp 11 Press the Start Stop button to stop the platter rotating push the power button to turn off the power PITCH ADJUSTMENT The pitch control is variable in a range of 10 During play observe the strobe dots If the strobe dots appear to the right the pitch is slower than the rated speed If flow to the left the pitch is faster than the rated speed Ifthe strobe dots appear stationary which means the platter is in normal turntable speed move the pitch control slider up or down to adjust the speed PLACEMENT e Do not place the unit in a location where it will be exposed to direct sun light or near a heating appliance e Do not place the unit in a location where there is high humidity or a lot of dust e Cartridge may pick up slight sound pressure or vibrations of the speakers coming along the floor or through the air resulting in howling Find a location which is very stable and free of vibration e The legs have functions for adjusting the height of the unit itself Adjust the legs to stabilize the main body horizontally MAINTENANCE e Clean the stylus periodically with a soft brush to prevent the accumulation of dust e When the sound becomes distorted or noisy check the stylus If worn out replace it with a new one e From time to
11. pleted and returned within 30 days from the date of purchase All other NUMARK products are warranted for 1 Year including but not limited to CD players CD Mix Stations turntables preamplifiers beatkeepers equalizers microphones headphones and all other accessories What is not covered This Limited Warranty is conditioned upon proper use of the product by the purchaser 2 the product or cosmetic damage b equipment that has the serial number removed or made illegible c all plastic surfaces and other ex This Limited Warranty does not cover a defects or damage resulting from accident misuse abuse neglect unusual physical or electrica stress modification of any part of ernally exposed parts that are scratched or damaged due to normal use d defects or damage from improper testing operation maintenance installation adjustment or service of the mixers e crossfaders RA Purchaser must then return the mixer to NUMARK in an adequate conta showing the date of purchase the serial number of the product and the seller s NUMARK customer service at 401 295 9000 Upon receipt NUMARK will repair or replace the defective products NUMARK may at NU reconditioned or new parts or components when repairing any product or replace a product with a rebuilt reconditioned or new product Repaired mixer or for 90 days whichever is longer All replaced parts co ixer is not covered by this Limited Warranty purchaser
12. th the packing from the box and take off the packing material DO NOT DISCARD ANY PACKING MATERIAL The headshell contained within the packing material 2 Set the 45 rpm adapter on the main unit counterweight and other parts are 3 Set the voltage selector switch to the 110 127 or 220 240V position according to the voltage of power supply This unit has been preset for 110 127V AC 4 Insert the turntable platter onto the center spindle Numark The Leader in DJ Technology 2000 Numark Industries 4 http www numark com TT1510 Rotate platter until belt drive spindle is exposed Pull the belt currently wrapped around the center ring under the platter away from the platter and over the belt spindle Be careful not to twist the belt BELT DRIVE SPINDLE SS Belt wrapped around lt a underneath the platter gt Set the turntable mat on the platter Installing the cartridge When installing a cartridge refer to the operating instructions of that cartridge During installation attach the stylus protector to guard the stylus tip from damage If you have purchased a unit with the cartridge included then that cartridge is already installed on the headshell You may skip to line 8 a Connect the lead wires to the cartridge terminals The terminals of most cartridges are color coded Connect each lead wire to the terminal of the same color White L Left channel Blue L Left channel Red R
13. time the dust cover and turntable cabinet should be wiped with a soft dry cloth Any volatile materials as alcohol thinner benzene etc may remove the paint or damage the luster should not be used 20 99 TON 8 SPECIFICATIONS Tonearm section Turntable section Type Universal s shaped tubular arm Type 2 speed full manual Effective length 220mm Driving method Belt drive General Motor DC motor Power supply AC110 127V 220 240V 50 60Hz Turntable platter Aluminum diecast 330mm dia Power consumption 8 Watts Turntable speed 33 1 3 and 45 rpm Dimension WxDxH 450 x 350 x 148 mm Starting torque More than 650g cm 17 3 4 x 13 3 4 x 5 7 8 Wow and flutter Less than 0 25 Weight 6 5 Kgs 14 lbs S N ratio 50dB DIN B Specifications and design may be changed without notice for improvement Numark The Leader in DJ Technology 2000 Numark Industries 7 http Awww numark com Numark Professional Disc Jockey Products LIMITED PRODUCT WARRANTY What is covered and for how long 1 NUMARK INDUSTRIES LCC NUMARK warrants to the original purchaser that NUMARK S DJ mixers and amplifiers are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer and continuing for the following period of time after that date for 2 Years The warranty is extended to 3 Years with the completion of the warranty card provided that the warranty card is com
14. tylus pressure unless your manufacturer specifies otherwise Release tab 11 Install the dust cover to the main unit This lid is not designed for continual removal If you need to remove the lid press both release tabs at the same time CONNECTIONS 1 Connect the power cord to the power outlet 2 Connect the unit s output terminals from the rear of the unit to the PHONO jack of your DJ mixer or home amplifier receiver Output terminals Phono input of mixer L White gt L Channel R Red gt R Channel GND Spade gt GND Notes Be sure to connect the ground terminal firmly to the amplifier or receiver If this connection is not loose a power source HUM may result Numark The Leader in DJ Technology 2000 Numark Industries 6 http Awww numark com TT1510 OPERATING INSTRUCTIONS 1 Push the power button to turn on the power The speed indicator and the strobe illuminator will light up 2 Place a record on the turntable mat When playing a 45rpm record with a large center hole place the 45 rpm adapter on the center spindle Set the rotation speed 33 45 to match the record Remove the stylus protector and release the arm clamp Set the cueing lever to the up position Press the Start Stop button The turntable platter will start to rotate Move the tonearm over the desired groove Set the cueing lever to the down position The tonearm will descend slowly onto the rec
Download Pdf Manuals
Related Search