user manual
Contents
1. The rigid items and plastic parts of the ISOFIX child restraint system must be so located and installed that they are not liable during everyday use of the vehicle to become trapped by a movable seat or in a door of the vehicle The ISOFIX base can only be used with the special designed shell This Child Restraint is classified for Semi universal Use and is suitable for fixing into the seat positions with ISOFIX anchorage points like followig cars CAR FRONT REAR Outer centre BMW Mini No Yes No SAAB No Yes No VOLVO xc70 No Yes No Seat positions in other cars may also be suitable to accept this child restraint If in doubt consult either the child restraint maufacturer or the retailer Car seat parts Carry handle operation Carry handle Buckle release Handle release i button button Strap release button Fixing lock Adjusting strap Rocking base Handle lock indicator Recline indicator both sides To move the handle from one position to another press both release buttons at the same time to the direction of the arrow see A B C Functions of different positions A For carrying your child or fitting in the car B When fitted on the pushchair or for rocking your baby C When used as a seat e g for feeding A Warning Secure infant in car seat with harness at all time to avoid fall hazard Shoulder belt adjustment Shoulder belt release adjustment Pu2. Installing Base SS La a AENEA eee 15 11 Using Base Sane Zoom Mahe ec vere 16 18 12 Attachment and Removal of car seat to Base 19 13 Removal of Base cccceccseeee AE Rees eeee eens 19 14 Care and Cleaning ccccc c0cecssse tessa seeteneeneneeeeen 20 Direct sunlight can make this car seat surface hot enough to burn child Use caution and check them on hot sunny days Do not use this car seat if it is damaged missing instructions or missing parts Do not use car seat if it has been in a crash it must be replaced A crash can cause unseen damage and using it again could result in serious injury or death Never leave child unattended Do not use car seat again or throw it away if the label time at the back of the car seat becomes overdue Do not sell it to the consigner or to the flea market abandon it into a dark rubbish bin Never place the car seat directly to the back of a person Make sure that the car seat is on one side behind of your back Do not attach car seat to a shopping trolley Do not use car seat in rear seat of a compact pickup truck Severe head injury or death can occur Never use car seat in any vehicle seating position equip ped with an active air bag Read your vehicle manual if you need to use car seat in the front when there is no rear seat in your vehicle 3 This is ISOFIX CHILD RESTRAINT SYSTEM It is approved to regulation No 44 04 It wi
3. Instruction Manual Infant car Seat and ISOFIX system This car seat conforms to ECER No 44 04 It is for children up to 13kg group 0 A Warning Failure to use this car seat properly will increase the risk of serious injury or death in a sudden stop or crash Introduction Table of contents Thank you very much for using this car seat We sincerely hope it can bring your child safety convenience and happiness when you travel The main structure of this product consists of car seat and base The latch system of the base can fit different kinds of cars including both the new car system ISOFIX car seat fixing system and the old car system safety belt system The additional leading cover can be inserted easily into the anchor of the infant car seat The device is intended for group 0 and fixture ISO R1 Car seat fixing pole and the stand tube of the base can increase the safety level of your car seat Death or serious injury can be decreased by 22 LIM ODUCT OTs 50 sceshect2aecasy ide Senecnnts Ea aS 1 2 Table of contents orccipcer ee epinis 2 Sc Wann Bresso A a R A seed saves Wedaes Nee Nesezestnossess 3 5 4 Know Your Car Seall or nee Aeee elho 6 14 5 Carry Handle Operation NH Lee Moorrees 7 6 Should sBeltOper tion N RA eers 8 9 7 Using Safety Buckle GSO N hernen N leh 10 8 Selecting A Vehicle Seating location 11 9 Latch system on car amp ISOFIX System 12 13 10
4. ating Location Seats which Seats which Do not use the face the side face the rear car seat in any f the vehicl i hicl t Step1 pull the strap out of the backrest and put infant into PE AE VEIRE of the vehicle Na where an airbag the car seat eae in fitted Step2 fasten the two locating parts together fig 1 A Warning After selecting aright vehicle seating location you need to check the installation of your car seat carefully Step3 push the locating parts into the socket fig 2 A positive click should be heard Step 4 cheek by pulling the straps above and below the buckle fig 3 Step5 the buckle is released by pressing the red button Latch system on car amp ISO FIX System The latch system can be used when securing this infant car seat with the stay in car base and should be used whenever possible Latch system on car The design and the use method are different for different latch systems Refer to your vehicle manual when you need to use the latch system ISOFIX system ISOFIX system consists of two anchors of two anchors at the bottom of the base and one connector for the backrest and base This kind of system can bring much convenience for the use of the infant car seat Latch system on car amp ISO FIX system Read this manual before you use ISOFIX system The two leading covers are unnecessary if you do not have the ISOFIX system the usage of the leading cover is
5. e bleach cleaners To Reassemble Seat Pad Reserve above steps for replacing seat pad and harness system Cleaning Straps Surface wash only with mild soap and damp cloth If harness straps are frayed or heavily soiled they MUST be replaced Cleaning Shell Wipe with mild solution of soap and water Avoid wetting labels Never use household detergents they can weaken plstic Cleaning Buckle Rinse buckle with warm water DO NOT use household detergents Never lubricate buckle 21 Not e
6. lease the car seat base see the picture on the left 4 Check that the base is firmly A Warning keep child with safety belt at all time to installed in the vehicle seat avoid fall hazard 5 Finished as it shows in fig6 Removal of base A Attention It may be better to use both kinds of safety systems A Attention Remove ISOFIX fixing lock with your fingers according to You should check that the angle of the car seat the direction of the arrow fig 1 Press the stand release base is within the safety standard when you attach button to unfold the stand tube fig 2 Turn ISO FIX fixing car seat to it Death or serious injury may occur at lock back according to the direction of the arrow fig 3 a lower position Suffocation may occur at a higher press the release button while pushing the stand plastic from position You should select an appropriate height slot to slot2 according to the arrow direction fig 4 Then position pull backward to check that the stand tube is securely locked Do it in reverse order for installation 19 20 Care and Cleaning Cleaning Seat Strap Covers And Infant Insert To Remove Seat Pad Strap Covers andinfant insert 1 Remove shoulder strap strap covers and infant insert 2 Slide seat pad from car seat by urgently pulling it off the top of car seat back To Launder Pad Hand wash with mild detergent and air dry Do not machine wash or machine dry Do not us
7. ll fit vehicles with positions approved as ISOFIX positions as detailed in the vehicle handbook depending on the category of the child seat and of the fixture The mass group and the ISOFIX size class for which this device is intended is Group 0 E ISO R1 When the device is used in combination with an adult safety belt to be used by means of the following wording Only suitable for use in the listed vehicles fitted 3 point approved to ECE Regulation No 16 or other equivalent standards It is recommended that any straps holding the restraint to the vehicle should be tight that any straps restraining the child should be adjusted to the child s body and that straps should not be twisted It is recommended that any luggage or other objects liable to cause injuries in the event ofa collision shall be properly secured 4 It is dangerous that making any alterations or additions to the device without the approval of the competent authority and not following closely the installation instructions provided by the child restraint manufacturer There shall be provisions made so that the instructions can be retained on the child restraint for its life period It is recommended that a The child restraint must not be used without the cover b The seat cover should not be replaced with any other than the one recommendedby the manufacturer because the cover constitutes an integral part of the restraint performance
8. n old GN car style fig 1 then fasten Or the safety buckle attach the base to the vehicle seat fig 2 2 press the stand release button to adjust the height the height of the stand tube ensure that it can touch the floor of the vehicle 3 check that the base is firmly attached to the vehicle seat A Warning You should check that the angle of the car Seat base is within the safety standard when you attach car seat to it Death or serious injury may occur at a lower position Suffocation may occur at a higher position You should select an appropriate height position 17 Using base with ISOFIXsystem in anew car style 1 Direct two leading cover into the anchor of the latch system on car fig 1 2 Inseat the fixing lock of the ISOFIX system into the leading cover until you hear a click fig2 amp 3 amp 4 Repeat it on the other side A Warning The indicator will show green when insert rightly 18 Using base Attachment and removal of car seat to base 1 Lower car seat into base and push down for lock You should hear a click as it securely locked Then 3 press the stand release button to push down handle to the use position B as showed in adjust the height of the stand tube left fig ensure that it can touch the floor of 4Warning Carefully check that the car seat is locked the vehicle fig 5 into base Lift it up to verify that it is securely locked 2 Press the release button to re
9. on page 13 AS Attention Death or serious injury can occur 1 After directing the ISOFIX system into the leading cover green will be shown by the indicator fig 3 gt 2 Use ISOFIX system or Latch system to ensure security __ 3 The latch system should be used whenever possible 4 Use the stand tube to adjust the height until it can reach the most Locked appropriate position Death or injury can occur at a lower position Suffocation can occur at a higher position 14 Installing Base Car seat fixing pole Ea Base Car seat base release button D D Backrest ISOFIX fixing lock Stand release button Leading cover i Sp Put the backrest tube into the socket according to the direction of the arrow fig 1 and fix it with screws AS Warning Do not remove again at random after adjustment correctly 2 turn to open according to the direction of the arrow when ISOFIX fixing lock is needed Turn back according to the opposite direction when the fixing lock is unnecessary fig 2 amp fig 3 AS Warning keep base folded when your vehicle is an old style 16 Both latch system on car and ISOFIX system can be used to tie a car seat base Refer to your vehicle manual when you need to use ISOFIXsystem Using latch system on car with an old car style PSX 1 pull the safety belt directly o gt through the base with a
10. t car seat on the ground move the handle to the fixed position see three positions of the handle on page 5 Use one hand to pull the shoulder belt out of the pad see position2 and at the same use the other hand to press the adjustment Button in order to release the safety belt A Warning When you need to adjust the shoulder belt make sure your child is at the right position and try to adjust the strap before you install car seat to your vehicle Shoulder belt adjustment Height selection 1 the right height selection J As your child grows you will need to move the straps to the next slots The correct slots are those at or just below your child s shoulders fig 1 Diagram1 shows a correct shoulder strap position all the others are incorrect A Warning Before tightening the harness ensure that the shoulder straps sit conformably on the child s shoulders and that the straps are not twisted 2 The adjustment of the safety belt Step1 Remove the ends of the shoulder straps from the metal plate at the rear of the seat Step2 pull the straps through to the front Step3 Re insert the straps through the appropriate slots in the seat shell polystyrene pad seat cover and head hugger Step4 Re attach the loops on the shoulder straps to the slots on the metal plate Check that the loops are within the metal plate slots and are securely attached 10 Using safety buckle Selecting A Vehicle Se
Download Pdf Manuals
Related Search