Digital Media Adapter DMA-100
Contents
1. ommers SETP 7 Using your remote control press 1 to select USB Disk The screen will show Wait to get USB disk to sense if USB Disk plug ready 14 Installation to get USB disk Nw Audio A KA pictur a P a i 1 Eos NE n 2 diit SETP 7 1 If connection is properly the screen will show Get USB DISK then you can choose to surf Audio Photo or view Playlist Audio E gt Ph Iw x SET PRESS gt Q E TOO O GUILPRESS a e Due to bandwidth limitation on the USB interface the Video function cant be Note selected in the USB disk media playback PLANET D USB SUPPORT VIBES ed Audion E _ Video m Photo Pret Playlis cae TO SET PRESS A OUI PRESSI 15 Digital Media Adapter User Guide SETP 7 2 If connection is failed the screen will show NO USB DISK on the top then you better check if you plug the USB Disk properly PLANET NO USB DISK Audio Video Photo Pictures Playlist TO SET PRESS THEN 8 MENU 16 Chapter 3 Media Server Installation Install Procedure This chapter describes how to install the DMA Media Server on to your PC and then configure the TCP IP and DMA Media Server settings Install Requirements DMA Media Server instal2. Digital Media Adapter DMA 100 User s Manual Copyright Copyright C 2004 PLANET Technology Corp All rights reserved The products and programs described in this User s Manual are licensed products of PLANET Technology This User s Manual contains proprietary information protected by copyright and this User s Manual and all accompanying hardware software and documentation are copy righted No part of this User s Manual may be copied photocopied reproduced translated or reduced to any electronic medium or machine readable form by any means by electronic or mechanical Including photocopying recording or information storage and retrieval systems for any pur pose other than the purchaser s personal use and without the prior express written permission of PLANET Technology Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications and makes no warranty and representation either implied or expressed with respect to the quality performance merchantability or fitness for a particular purpose PLANET has made every effort to ensure that this User s Manual is accurate PLANET dis claims liability for any inaccuracies or omissions that may have occurred Information in this User s Manual is subject to change without notice and does not represent a commitment on the part of PLANET PLANET assumes no responsibility for any inaccuracies that may be contained in th
3. would like to list my media on the OSD but do not see my media listed A 1 Please make sure that you have setup the media folders audio video and images correctly 2 Start the DMA Media Server Refer to Chapter 3 for details Q The media plays fine for a while and then all of a sudden it freezes on the A 1 If you are using Ethernet please make sure that the cable is secure if using wireless this could be due to 2 4GHz interference from other 802 11b de vices such as WLAN cordless phone or microwave ovens 2 You may need to start the server again 3 Press the reset button on the rear panel of the DMA 100 Q My media list formats are MPEG and JPEG how can display those files A Change the file name to MPG and JPG then you can display any media you want 41 Digital Media Adapter User Guide Appendix B Specification Hardware Ethernet Interface 10 100Base TX RJ 45 RCA video S Video RCA audio Coaxial Digital Audio Output Supported image format YP PNG BMP Audio Sampling rates of 32 44 1 44 48 88 2 96KHz MPEG 1 Layers 1 Il and IlI AAC AC 3 Supported video format MPEG 1 MPG DAT decoding Supported audio format MPEG 2 MPG VOB decoding MPEG 4 DivX AVI decoding Media server requirement T server installation Management On screen remote control Media server for media content management 42
4. any 7 S DMA 100 Digital PLANET ee This program is subject to change without notice All right reserved Copyright C 200 SETP 2 The Welcome screen will follow this opening screen welcome xi Welcome to the DMA Media server Setup program This program will install Media server on your computer It is strongly recommended that you exit all Windows programs before running this Setup program Click Cancel to quit Setup and then close any programs you have running Click Next ta continue with the Setup program WARNING This program is protected by copyright law and international treaties Unauthorized reproduction or distribution of this program or any portion of it may result in severe civil and criminal penalties and will be prosecuted ta the maximum extent possible under law SETP 3 Click on the Next button to continue Please read the following License Agreement Press the PAGE DOWN key to see 1 the rest of the agreement This Media server software is provided to you under the following terms This means 1 All copyrights to Media server Installation are exclusively owned by the author PLAMET Technologies Corp 2 Anyone may use this software by the enclased package of CD ROM with PLANET digital media adapter DMedia Server Do you accept all the terms of the preceding License Agreement If you choose Setup will clase To
5. Default 192 168 0 100 4567 Press the ENTER button to save these settings You will then return to the previous menu Press the MENU button to go the main menu The DMA 100 will then restart itself automatically SETP 8 The configuration for this topology is completed Now refer to Chapter 3 on how to install the DMA Media Server into your PC In the first installation it is suggested to locate your PC using IP address for example 192 168 0 100 in the same network segment where the DMA 100 in stalled If you re not familiar with TCP IP please refer to related chapter on user s manual CD or consult your network administrator for proper network configu rations Installation One PC to Multiple TVs After you have connected the composite audio video cable from each DMA 100 to its specified TV connect all the straight RJ 45 cables to a Switch from the DMA 100s Then connect another straight RJ 45 cable from the Switch to your PC Follow the steps below for each DMA 100 so that each one has a separate IP address SETP 1 Switch the TV into AV1 or AV2 mode depending on how you have connected the composite audio video cable Switch SETP 2 You will then see the main menu with three options The image below depicts the main menu 1 VOD 2 Setup 3 Information Select number enter the function 9 PLANET Digital Media Adapter User Gu
6. Sa M a all X SA gt Photo Pictures aii zl Playli ist i TO SET PRESS e e THEN E OUIT PRESS SETP 4 Select Audio and press ENTER on remote control The available music files will be listed on the TV screen Air Supply04JHere Amin Air Supply05 swee Drea ims mp3 Air Su ply OSJAl vays mpd Air Supply 99 1chaine ed eic Air Supply10 Without You mp3 Air Supply11 T he One iu 23 Air Supply12 Goodbye mp au A 13 AIl Out Of L V HT 113101 TO Y PRESS 2Y Back to JT f ww DMA Sery size Sage has m 2f Digital Media Adapter User Guide SETP 5 Use the UP and DOWN navigation buttons to scroll up and down the list and then press the Enter button to play the selected track The other buttons are as follows gt PREV lt lt Press this button to scroll to the previous page gt NEXT gt gt Press this button to scroll to the next page gt PLAY gt Press this button to play all the tracks starting with the selected track RETURN Press this button to return to the previous menu Watch your favorite Videos SETP 1 Switch the TV into AV1 or AV2 mode depending on how you have connected the composite audio video cable SETP 2 You will then see the main menu with three options The image below depicts the main menu 1 VOD 2 Setup 3 Information Select number enter the function 9 PLA
7. b PA Audio il i v Photo Pictures ips E d r TO OUIT PRESS m gt 4 eT 2 AP 30 SETP 4 Select Photo Pictures and press ENTER on the remote control You will then see your list of pictures PLANET DSC05037 JPG DSC05058 JPG DSC05059 JPG DSC05060 JPG DSC05061 JPG DSC05062 JPG DSC05063 JPG DSC05064 JPG AY DSC05065 JPG ee DSC05072 JPG RETURN 3 BacktoMaln DSC05073 JPG MASEL PRESS ENTER size UMP NEXT b Vis SETP 5 Use the UP and DOWN navigation buttons to scroll up and down the list and then press the ENTER button to display the selected image The other buttons are as follows gt PREV lt lt Press this button to scroll to the previous page gt NEXT gt gt Press this button to scroll to the next page gt PLAY gt Press this button to play all the tracks starting with the selected track RETURN Press this button to return to the previous menu Build a Playlist of your favorite media SETP 1 Switch the TV into AV1 or AV2 mode depending on how you have connected the composite audio video cable SETP 2 You will then see the main menu with three options The image below depicts the main menu 31 Digital Media Adapter User Guide 1 VOD 2 Setup 3 Information Select number to enter the function Q PLANET Networking amp Commer SETP 3 Using your
8. remote control press 1 to enter the VOD Video on Demand menu You will then see four options 8 Commericatce ibi i uiii I PRESS e o j HM TO OUIT PRESS MENU yd SETP 4 Select Playlist and press ENTER on the remote control You will then see your list of all the media uta Ti I i conan vcd mpg tii FF mpg Pii Deep Forest Sweet ball df Guem Balance_ 320 iy 4 aam A Guem Le serp 2 onst mp3 i Ur SA MIX INITIAL D HYP did DSCOSO058JPG DISPLAY RA x RE MESA D C05060 JPG lt Back Main DSC0506 TO SET PRESS t TO OUIT PRESS 7 32 SETP 5 Use the UP and DOWN navigation buttons to scroll up and down the list and then press the ENTER button to select the media You will then see a check mark placed next to the media This indicates that the media is added to the play list PLANET We w2 Ue4 8 Canones conan vcd mpg FF mpg Deep Forest Sweet Lullaby 256VBR mp3 Balance_320 mp3 Guem Le serpent_192_const mp3 INITIAL D HYPER MEGA MIX_160 constimp3 m DSC05037 JPG DSC05058 JPG DISPLAY MA DSC05059 JPG LAA L DSC05060 JPG NEX RETURN 43 Back to Main DSC05061 JPG TO SET PRESS o e THEN OUIT PRESS SETP 6 After making your selections press the Display button on the screen You will
9. NET SETP 3 Using the remote control press 1 to enter the VOD Video on Demand menu You will then see four options 28 PLANET 4 lt a Audio SETP 4 Select Video and press ENTER on the remote control You will then see your list of videos e PLANET MVI 1103 MVI 1104 AVI MVI 1105 AVI Play All ack to Main e a yu poser press 0000 RUE ENTER E DMA 2 fadi ag GP SETP 5 Use the UP and DOWN navigation buttons to scroll up and down the list and then press the ENTER button to play the selected video The other buttons are as follows gt PREV lt lt Press this button to scroll to the previous page gt NEXT gt gt Press this button to scroll to the next page gt PLAY gt Press this button to play all the tracks starting with the selected track RETURN Press this button to return to the previous menu 29 Digital Media Adapter User Guide View your favorite JPEG images SETP 1 Switch the TV into AV1 or AV2 mode depending on how you have connected the composite audio video cable SETP 2 You will then see the main menu with three options The image below depicts the main menu 1 VOD 2 Setup 3 Information Select number to enter the function 9 PLANET SETP 3 Using your remote control press 1 to enter the VOD Video on Demand menu You will then see four options PLANET ri
10. R SETP 5 Press the RIGHT button once and then the DOWN button four times to select Upgrade Firmware and then press the ENTER button e T I 8 Commoticatce Bs AUDIO SETTING Firmware Version Network USB Ethernet LAN MES aa Upgrade Firmware 6228 utie INITIAL SETTING 1L 7 TO SET PRESS O THEN cc um SET PRESS 4 oO THEN ENTER uli TO OUIT PRESS T csv AN SETP 6 If you are sure that you would like to upgrade the firmware click on the Yes button Press UP DOWN to select ENTER to set BACK to quit TE PRESS TO OUIT PRESS 39 Digital Media Adapter User Guide SETP 7 Wait a few moments while the firmware is upgraded Do not power off the de vice during this process The DMA 100 will reboot automatically after the firmware upgrade Please be sure to have a stable power supply before upgrading the DMA 100 and DO NOT interrupt the upgrading procedure or the unit will be Note permanently damaged 40 Appendix A Trouble Shooting Q have plugged the DMA 100 in my TV correctly but don t see anything on the Screen A Please make sure that the DMA 100 is plugged in and notice the LEDs Change your TVs setting to AV1 or AV2 Q press the right buttons on my remote control but noting happens A 1 Point the remote control closer to the DMA 100 s sensor 2 Change the batteries Q
11. R Volume Digits 0 9 Alpha 2 MUTE Volume Control Chapter 2 Installation Connecting the DMA 100 This chapter describes the different topologies of the DMA 100 and how to connect and setting the topology with your PC and TV Under every situation the DMA 100 DMA100W must be wired to the TV or other dis play device The following image shows the rear panel of the DMA 100 and the TV Ma T Ln ee T Tam As you can see in the above diagram the composite Audio Video cable is connected from the DMA 100 to the same ports of the TV One PC to One TV After you have connected the composite audio video cable to your TV connect the cross over RJ 45 cable to your PC Follow the steps below to assign an IP address to the DMA 100 SETP 1 Switch the TV into AV1 or AV2 mode depending on how you have connected the composite audio video cable SETP 2 You will then see the main menu with three options The image below depicts the main menu Digital Media Adapter User Guide 1 VOD 2 Setup 3 Information Select number to enter the function PLANET SETP 3 Using your remote control press 2 to enter the Setup screen You will then see three tabs on the left side of the screen Press the DOWN arrow twice so that that Initial Setting tab is selected 8 PLANET SETTING VIDEO Firmware Version SETTING Network USB Ethernet LAN I
12. T PRESS Firmware Version SETP 1 Switch the TV into AV1 or AV2 mode depending on how you have connected the composite audio video cable SETP 2 You will then see the main menu with three options The image below depicts the main menu 1 VOD 2 Setup 3 Information Select number enter the function e PLANET Networking amp Commuricatce 36 SETP 3 Using your remote control press 2 to enter the Setup screen You will then see three tabs on the left side of the screen Press the DOWN arrow twice to move to Initial Setting SETP 4 Press the RIGHT button once and then DOWN button to select Firmware Version and then press the ENTER button e RLANET AUDIO SETTING Ti E amp us ja E Et LAN E posa E 4 SETTING Network USB 2222 INITIAL SETTING Lal After entering the Firmware version menu you may now verify the current installed firmware version in DMA 100 Lr 8 e ee DMA Version 1 00 i pi 7 1 f 4 e VJ E Firmware Upgrade In most circumstances it is not required to perform firmware upgrade In some spec tacular scenario you might need to upgrade the firmware of the DMA 100 when there is a patch firmware available from your local distributor SETP 1 Before upgrading the firmware the firmware file should be pla
13. Upgrade Firmware ow INITIAL SET muU TO SET PRESS Q O renter NB TooumprRess sooo EE nd SETP 4 Press the RIGHT arrow button to enter the Initial Setting tab Then press the DOWN arrow and select Network USB Installation Q PLANET ero TI AUDIO SETTING E T Versi iban rmware Version b U SETTING Network USB Ethernet LAN Ethernet LAN Upgrade Firmware Wireless LAN USB Disk SETTING SET PRESS O QO QO THEN 55 enu E SETP 5 Press the RIGHT arrow once again and select Ethernet LAN then press ENTER button 1 ul Ethernet LAN Setting oud DHCP Disable z IP address 192 168 0 1 P d Netmask 255 255 255 0 Gateway 192 168 0 254 Server IP 192 168 0 100 4567_ SETP 6 Using the arrow keys and the numbers on the remote change the existing set tings to the following Digital Media Adapter User Guide The LAN information Parameter Description of DMA 100 DHCP IP address Netmask Gateway Server IP SETP 7 Enable Disable Default Disable LAN IP address of DMA 100 Default 192 168 0 1 LAN mask of DMA 100 Default 255 255 255 0 Gateway of DMA 100 Default 192 168 0 254 The Server IP is the IP address that will be assigned to the PC that the DMA Media Server will be running and the port number is the one as signed to the DMA Media Server
14. ced in the proper folder in the DMA Media Server Upgrade Bin file menu 37 Digital Media Adapter User Guide NETWORK SETUP Port 0 865535 4567 Maximum Connections 0 Defaut Media Source Directories Video Directory C Pragram Files PLANE TNDMANVI Audio Directory C Program Files PLANE TS OMASA Photo Directory XPragram FilessPLAMETSDMASPI Upgrade Bin file C Program Files SPLANET SOMA Message How many lines you want in system message box 1000 FX DIR Cancel Upgrade BIN File This is the folder where the new firmware is located Click on the Browse button to select the appropriate folder and then click on the OK buiton SETP 2 Switch the TV into AV1 or AV2 mode depending on how you have connected the composite audio video cable SETP 3 You will then see the main menu with three options The image below depicts the main menu 1 VOD 2 Setup 3 Information Select number enter the function e PLANET Networking amp Commuarica ice SETP 4 Using your remote control press 2 to enter the Setup screen You will then see three tabs on the left side of the screen Press the DOWN arrow twice to move to Initial Setting 38 e PLANET A de nim AUDIO SETTING Firmware Version Network USB Ethernet LAN D 4 Upgrade Firmware INITIAL SEPING r TO SET PRESS O OO E P R
15. designations are claimed as trademarks or registered trademarks by their respective compa nies Revision User s Manual for PLANET Digital Media Adapter Model DMA 100 Rev 1 0 Oct 2004 Part No EM DMA100V1 TABLE OF CONTENTS CHAPTER 1 ivTRODUCTION eee 1 Feat l6S rFared awe FevRvEEseewaVdcs bte EVE 1 Package COMUCIS uini divieto eive iv dede Di 2 PIVSIC A CC 2 CHAPTER 2 INSTALLATION eee 5 Connecting the 100 5 CHAPTER 3 MEDIA SERVER 8 17 Ress 25 CHAPTER 4 VIEWING THE MEDIA e 25 CHAPTER 5 ADVANCED SETTINGS ceee 34 APPENDIX A TROUBLE sHooriNG er araara nao anrnnnnnn 41 APPENDIX speciFICATION e reee ar anaon nnnnoannnn 42 Chapter 1 Introduction Enjoy Media Content Sharing and Playback in Digital Home Digital Media Adapter from PLANET PLANET DMA 100 is an innovative easy to use entertainment center designed for your digital media playback Via wired network connection or USB media storage this device can playback your favorite digital music picture and video onto television or stereo system in your home at your convenience With its on screen ease of use user interface and handy remote control you can start sharing th
16. e for more convenience and pleasure Digital Media Adapter User Guide Package Contents The following items should be included Digit Media Adapter unit Remote Control Power Adapter RCA Cable CD ROM Quick Installation Guide If any of the above items are damaged or missing please contact your dealer immedi ately Physical Details Front Panel Remote Sensor LAN PWR Front Panel of DMA 100 Rear Panel svnDc i CHES LAN AUDIO VIDEO 5 VIDEO Rear Panel of DMA 100 LAN Connect the RJ 45 cable to a PC or Switch The DMA Media Server must be installed on the PC Connect Coax cable to this port for better quality However Coaxial hr your audio system must support this interface Audio R L Connect the composite audio cables to these two ports red amp white Video Connect the composite video cable to this port yellow S Video Connect the S Video cable for high quality video However the TV or other display device must support this interface If the device crashes please press this reset button Digital Media Adapter User Guide Remote Control This remote control is the most significant part of the DMA 100 It is used to configure the DMA 100 from the OSD On Screen Display The following image and table describe the buttons on the remote control Power MUTE AL NTSC MENU BACK Navigation arrows ENTER button Video Controls CLEA
17. e media content on the TV or stereo system in your digital home in real time The DMA 100 is a multimedia player that can play the popular MPEG 1 MPEG 2 MPEG 4 DivX video format files from your computer to TV Using this device you can also enjoy the playback of your favorite MP3 AC3 audio files on your TV in the living room or your stereo system in the kitchen As digital photo is gaining its popularity the DMA 100 is capable of displaying slide show of your favorite pictures on TV sup ported formats in JPEG PNG BMP giving you the convenience of viewing and sharing these pictures on TV in your living space with friends and family members DMA 100 Features e Popular media file format supports PLANET DMA 100 support popular audio formats MP3 WAV AAC AC3 image formats JPG PNG and BMP and video formats MPEG 1 2 4 DivX e Smart Install wizard The DMA 100 has built in easy TV setup for machine configuration to bring the most convenience Via intuitive design remote controller users may enjoy the media content just in minutes e Analog Digital audio output DMA 100 has built in left right analog stereo audio and coaxial digital audio connectors for the audio system connection e USB medial storage support DMA 100 is able to view the stored images in slide show or digital aloum mode for more convenience and pleasure e Image viewing DMA 100 is able to view the stored images in slide show or digital aloum mod
18. fault 192 168 0 254 Server IP The Server IP is the IP address that will be assigned to the PC that the DMA Media Server will be running and the port number is the one as signed to the DMA Media Server Default 192 168 0 100 4567 SETP 7 For the IP address of the first DMA 100 enter 192 168 0 1 and then add one to the last octet depending on the number of DMA 100s you are using For example the first DMA 100 will be 192 168 0 1 the second will be 192 168 0 2 and the third will be 192 168 0 3 and so on 11 Digital Media Adapter User Guide SETP 8 Press the ENTER button to save these settings You will then return to the previous menu Press the Main Menu button to go the main menu The DMA 100 will then restart itself automatically SETP 9 The configuration for this topology is completed Now refer to Chapter 3 on how to install the DMA Media Server into your PC L Note In the first installation it is suggested to locate your PC in the same network segment 192 168 0 100 of DMA 100 DMA 100W If you re not familiar with TCP IP please refer to related chapter on user s manual CD or consult your network administrator for proper network configurations Connect with USB Disk After you have connected the composite audio video cable to your TV connect the USB Disk to your DMA 100 Follow the steps below to assign an IP address to the DMA 100 SETP 1 Switch the TV into AV1 or AV2 mode depending on how yo
19. ide SETP 3 Using your remote control press 2 to enter the Setup screen You will then see three tabs on the left side of the screen Press the DOWN arrow twice so that that Initial Setting tab is selected PLANET wea 0 Commer Ar o AUDIO SETTING Firmware Version Network USB Ethernet LAN Upgrade Firmware TO SET PRESS O OO QO E gt E P SETP 4 Press the RIGHT arrow button to enter the Initial Setting tab Then press the DOWN arrow and select Network USB Q PLANET aA omm o Bu AUDIO SETTING Cum Firmware Version SETTING Network USB Ethernet LAN Ethernet LAN Upgrade Firmware Wireless LAN USB Disk TO SET PRESS O P enren enu E SETP 5 Press the RIGHT arrow once again and select Ethernet LAN then press the ENTER button 10 Installation alaner DHCP Disable IP address 168 0 L Netmask 2557255 0 Gateway 168 0 254 Server IP 168 0 100 4567 Ethernet LAN Setting SET PRESS Omen cc TOOUILPRESS SETP 6 Using the arrow keys the numbers the remote change the existing set tings to the following The LAN information Parameter Description of DMA 100 DHCP Enable Disable Default Disable IP address LAN IP address of DMA 100 Default 192 168 0 1 Netmask LAN mask of DMA 100 Default 255 255 255 0 Gateway Gateway of DMA 100 De
20. install Media server you must accept this agreement SETP 4 18 After reading the License Agreement click on the Yes button to continue Choose Destination Location Setup will install DMA Media server in the following folder install to this folder click Next Ta install to a different folder click Browse and select another folder can choose not to install Media server by clicking Cancel to exit Setup Destination Folder Media server Browse lt Back Cancel SETP 5 Click on the Browse button if you would like to change the destination location if not click on the Next button to continue Select Program Folder AX Setup will add program icons to the Program Folder listed below fou may a new folder name or select one from the existing Folders list Click Next to continue Program Folders Media server Existing Folders Administrative Tools Dr eye Efficient Networks aenie 5 oft 104 1028 0 Java Web Start Microsoft Office L Marton Antivirus Cancel SETP 6 On this screen you may change the name of the program folder If you do not want to change this name click on the Next button to begin copying the files c program files planet dma media server dma media server exe SETP 7 After the files have been copied the following message will appear Click on the Finish b
21. is User s Manual PLANET makes no commitment to update or keep current the information in this User s Manual and reserves the right to make improvements to this User s Manual and or to the products described in this User s Manual at any time without notice If you find information in this manual that is incorrect misleading or incomplete we would appreciate your comments and suggestions CE mark Warning This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 to the FCC rules These limits are designed to provide reasonable protec tion against harmful interference when the equipment is operated in a residential environment This equipment generates used and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is unlikely to cause harmful interference But if it does the user will be required to correct the interference at his or her own expense The authority to operate this equipment is conditioned by the requirement that no modifications will be made to the equipment unless PLANET expressly approves the changes or modifications Trademarks The PLANET logo is a trademark of PLANET Technology This documentation may refer to numerous hardware and software products by their trade names In most if not all cases these
22. is the folder where the audio MP3 content is lo cated Click on the Browse button to select the appropriate folder and then click on the OK button 23 Digital Media Adapter User Guide __ NetMeeting _ Network Associates J C PLANET EL DMA Phata Media server TC A amp nn cen gt Photo Directory This is the folder where the JPEG images are located Click on the Browse button to select the appropriate folder and then click on the OK button e NetMeeting Fi a Network Associates E a Morton Antivirus 3 1 Marton Personal Firewall 3 1 Outlook Express E PLANET i oma im Audio Video Media server m T asnn x k ea gt Upgrade BIN File This is the folder where the new firmware is located Click on the Browse button to select the appropriate folder and then click on the OK button Message This value is the number of lines that will be displayed on the system message You may leave this at its default setting as this will not af fect the viewing experience Click on the Save button you will then return main screen and then click on the Start button to start the DMA Media Server 24 Chapter 4 Viewing the Media DMA 100 Service Preparation After reading the previous chapters and successfully complete the DMA 100 installa tions Now we ll show you how to bring the media content on the media server into
23. lation requirement system Hard CPU Pentium Ill 800 MHz or above e Memory Size 128 256 MB recommended e card resolution 1024 x 768 or above e 128MB or above free HDD space e CD ROM drive e 10 100 Mbps Ethernet Adapter Support OS Win 98 SE Win 2000 Win Me Win XP DMA Installation requirement TV with vacant RCA or S video input connector Stereo amplifier with vacant RCA input connectors e Your PC can establish a physical connection to the Digital Media Adapter The PC and the Digital Media Adapter must be directly connected using the LAN port on the Digital Media Adapter or on the same LAN segment That is the PC must be configured to an IP address and subnet mask in 192 168 0 x segment For exam ple IP 192 168 0 100 subnet mask 255 255 255 0 e The Digital Media Adapter must be installed and powered ON If the Digital Media Adapter s default IP Address 192 168 0 1 is already used by another device the other device must be turned OFF until the Digital Media Adapter is allocated a new IP Address during configuration Install the DMA Media Server SETP 1 Insert the CD ROM that is provided in this package into the CD ROM drive of you PC The software should run automatically if it does not then you need to run the setup exe file manually by clicking on the CD ROM drive from the My Computer icon on the desktop You will then see the Opening screen 17 Digital Media Adapter User Guide T
24. m xl 5ystem Message Server status HostName ibmnb IP Address 192 168 95 79 Network status Transfer Rate 00000 M bps Sent 0 Packages Users 0 Received 0 Packages Click on the Setup button to configure the destination of the media You will then see the following screen 22 NETWORK SETUP Port 0 55535 4567 Maximum Connections 10 Media Source Directories Video Directory EAProgram File PLANETADMANVI erowse Audio Directory C Program Files PLANETSDMAMA Browse Photo Directory C Program FilessPLANE TADIMASPI Browse Upgrade Bin file C Program Files PLANETSDMA ra r Browser Message How many lines you want in system message box 1000 Port This is the default port of the DMA Media Server Do not change this unless you have changed the default port number on the DMA 100 Maximum Connections Set this value depending on the number of DMA 100 s you have If you have only one then change this number to one However leaving this at 10 will not make a difference Video Directory This is the folder where the video content is located Click on the Browse button to select the appropriate folder and then click on the OK button ax LL NetMeeting n E C3 Network Associates 4 Norton Antivirus Marten Personal Firewall hs 1 Outlook Express A PLANET 3 LT Media server tcasnn an k Audio Directory This
25. ntrol press 2 to enter the Setup screen You will then see three tabs on the left side of the screen Press the RIGHT arrow twice to change the audio out setting to Encoded Digital and then press the Enter button 34 gt PLANET Audio Out Analog DPCM Analog DPCM Encoded Digital T VIDEO SETTING L 17d INITIAL SETTING 5 5 0 ENTER 4 Bro IS enu NO TV Out By default the TV Out settings is configured to NTSC C S This is the correct setting for most digital media If you are having problems with viewing the media then you may want to change this setting to PAL C S SETP 1 Switch the TV into AV1 or AV2 mode depending on how you have connected the composite audio video cable SETP 2 You will then see the main menu with three options The image below depicts the main menu 1 VOD 2 Setup 3 Information Select number to enter the function PLANET 35 Digital Media Adapter User Guide SETP 3 Using your remote control press 2 to enter the Setup screen You will then see three tabs on the left side of the screen Press the DOWN arrow once to change the TV out setting to PAL C S Video and then press the Enter but ton PLANET Were tng Commerc AUDIO SETTING TV Out NTSC C S Video NTSC C S Video PAL C S Video INITIAL SETTING TO SET PRESS Q 4 TO QUI
26. ow you to configure the IP address of your PC You will then see the following window Internet Protocol TCP IP Properties 2 xl ou can get IP settings assigned automatically if pour network supports this capability Othenvice need to ask your network administrator Far the appropriate settings Obtain an IP address automatically Use the following IP address IP address 132 158 0 100 Subnet mask 255 2550 255 Default gateway C Obtain OWS server address automatically Use the following ONS server addresses Preferred ONS server Alternate ONS server Advanced Digital Media Adapter User Guide SETP 3 Select Use the following IP address radio button and then enter an IP ad dress and subnet mask for your PC Make sure that the DMA 100 and your PC is on the same subnet SETP 4 Click on the OK button The TCP IP settings of your PC have now been con figured on the same subnet as the DMA 100 Setup the DMA Media Server After installation completed you will see the icon of DMA Media Server in the Win dows Programs and on the desktop To run the DMA Media Server click Start gt Programs gt DMA Media Server or just double click on the desktop icon Media Server Desktop Icon After launching the program you will see the main setup screen as the image depicts below Lm ij DMA Media server E
27. then see the selected media listed on the screen gt PREV lt lt Press this button to scroll to the previous page gt NEXT gt gt Press this button to scroll to the next page gt PLAY gt Press this button to play all the tracks starting with the selected track SEARCH Press this button to shuffle play gt REMOVE ALL Press this button to remove all the media from the play list RETURN Press this button to return to the previous menu Note This play list will be lost of the DMA 100 is restarted 33 Digital Media Adapter User Guide Chapter 5 Advanced Configurations DMA 100 Advanced Functions This chapter describes how to configure the more advanced settings of the DMA 100 such as Audio Video Firmware Version and Upgrade Firmware Audio Out By default the Audio Out settings is configured to Analog DPCM This is the correct setting if you are using the composite audio cable that is supplied in this package If you are using the coax cable for your audio devices then you may want to change this setting to Encoded Digital SETP 1 Switch the TV into AV1 or AV2 mode depending on how you have connected the composite audio video cable SETP 2 You will then see the main menu with three options The image below depicts the main menu 1 VOD 2 Setup 3 Information Select number enter the function e PLANET SETP 3 Using your remote co
28. u have connected the composite audio video cable SETP 2 You will then see the main menu with three options The image below depicts the main menu 12 Installation Setup Information Select number to enter the function PLANET SETP 3 Using your remote control press 2 to enter the Setup screen You will then see three tabs on the left side of the screen Press the DOWN arrow twice so that that Initial Setting tab is selected SETP 4 Press the RIGHT arrow button to enter the Initial Setting tab Then press the DOWN arrow and select Network USB Q PLANET LI 4 Comme io nio AUDIO SETTING vibro Firmware Version SETTING Network USB Ethernet LAN LAN Upgrade Firmware Wireless LAN USB Disk TO SET PRESS AOAC THEN P P To SETP 5 Press the RIGHT arrow once again and select USB Disk then press the ENTER button Then the device will going to auto reboot 13 Digital Media Adapter User Guide eter g A rice AUDIO SETTING Firmware Version SETTING Network USB Ethernet LAN Ethernet LAN Upgrade Firmware Wireless LAN USB Disk 55 ENER TO OUIT PRESS SETP 6 Then you can see the main menu updated as the following images 1 USB Disk 2 Setup 3 Information Select number to enter the function e PLANET
29. utton to complete the installation 19 Digital Media Adapter User Guide Setup Complete E Setup has finished installing DMA Media server on your computer Setup can launch the Read Me file and Media server Choose the options want below Click Finish to complete Setup SETP 8 The DMA Media Server installation process is complete You will then see the DMA Media Server icon on the desktop 3 Ld Desktop Icon Media server TCP IP settings of DMA Media Server Follow the steps below in order to configure the TCP IP settings of Media server SETP 1 In the Control Panel double click Network Connections then double click on the connection of your Network Interface Card NIC and then click on the Properties button You will then see the following window appear 20 Local rea Connection 7 Properties General Sharing Connect using B PLANET ENW 8504 PCI Fast Ethernet Adapter 3 Components checked are used by this connection 2 EClientfor Microsoft Networks ull Check SecuRemote iA File and Printer Sharing far Micrasott Networks a ON IIEELED Menta nel Ia ur Install Uninstall Froperties Description Allows your computer to access resources on a Microsoft network Show icon in taskbar when connected Cancel Select Internet Protocol TCP IP and then click the Properties button This will all
30. your living space Q PLANET 6 Commer ace When powering on the DMA 100 the DMA 100 home page will be displayed approxi mately 2 seconds on your television then boot into the OSD menu for easy navigation Listen to your favorite music SETP 1 Switch the TV into AV1 or AV2 mode depending on how you have connected the composite audio video cable SETP 2 You will then see the main menu with three options The image below depicts the main menu 25 Digital Media Adapter User Guide 1 VOD 2 Setup 3 Information Select number to enter the function PLANET SETP 3 Using the remote control press 1 to enter the VOD Video on Demand menu You will then see four options 8 3r PVaNer waiting For DMA Meida Server Photo Pict Pla N And the screen will show Waiting for DMA Media server to sense If the media connection is failed there will be message Can t Link to DMA Media Server Please Check Your Network on the television please check network connection between the DMA 100 and the media server 26 B Can t Link to DMA Modia Server 6 ons Your Network X If media server is properly connected the screen will show CONNECTION then you can choose to surf Audio Photo or view Playlist 3 8 CONNECTION d Audio EN y Q video x
Download Pdf Manuals
Related Search