K58 Power Supply
Contents
1. User Manual For Tube Mic Power Supply Thank you for purchasing Karma K 58 Tube Microphone Our products are manufactured with the finest materials components and craftsmanship Power 110 220VAC remote p s w cable This external power supply is designed specifically for the K58 microphone It has a control for changing not only between the 3 patterns but in between stages as well This allows you to have the control of every situation with 9 combinations The back has an input for the 7 pin cable used with the K58 There is also a voltage switch for you to use as needed with your regions requirements The K58 is a tube microphone and requires a special setup and treatment Inside the flightcase you will find the custom power supply box You will also notice that there are multi pin connectors on one cable These connectors are for use with these microphones only Take your custom power supply from the case and plug one end of the multi pin connector cable into the microphone and the other end of the cable into the multi pin input on the custom power supply Next take the normal 3 pin XLR cable and plug one end into the 3 pin side of the custom power supply and the other end into your desired input such as a mixer or stand alone microphone pre amplifier It is highly recommended that a quality stand alone microphone pre amplifier be used for best results enhanced sound and performance with all Karma microphones If power is being supplied an2. d still there is no signal be sure to check all the cables you are using and make sure they are operational Just like any other tube microphone you must always turn on your power supply and microphone to let them warm up for about an hour before using Once you have your custom power supply turned on and your mic is warmed up you may now adjust your gain Please note that gain staging is very important and if not gain staged properly you can overdrive an input stage and produce unwanted distortion It is critical to set the gain correctly See your mixer and or microphone pre amplifier manuals for more details Please note that this is a tube microphone and provides that warm vintage tube sound so many recording artists engineers and producers prefer however tubes require special treatment Remember you must always turn on your power supply and microphone and let it warm up for about an hour before using Tubes need to completely warm up and stabilize before actual use Also tubes do age and need replacing now and again CAUTION With the power supply unplugged from the wall electrical outlet and no cable attached to the mic you can unscrew the body of the microphone and carefully remove the tube and replace with a new one from Karma at anytime The K58 power supply has a variable 9 pattern knob 3 settings for cardioid 3 for omni directional and 3 for figure 8 Feel free to experiment for best results You are sure to enjoy years of troubl
3. e free use with proper care and maintenance We wish you many hours of wonderful recordings KARMA AUDIO PRODUCTIONS 21621 STEVENS CREEK BLVD CUPERTINO CA 95014 408 446 2928 M F 9am 6pm Sat 2pm 8pm 2006 Karma Audio Productions Inc
Download Pdf Manuals
Related Search