DG-HD1TBPVR User Manual
Contents
1. is highlighted press EXIT 2 2 3 Recording Option In the Recording Option sub menu of the PVR amp Booking Menu you can set the parameters for Recordings Rec Time This parameter sets the standard time for a touch recording event Use the gt keys to select from one of the following UnLimit this means unlimited time if you select this option the system will continue to record until you press the STOP key or the system runs out of HDD space 30min One touch recordings will record for 30 minutes only 60min One touch recordings will record for 60 minutes only 90min One touch recordings will record for 90 minutes only 120min One touch recordings will record for 120 minutes only Time Shift Activates Time Shift use the lt P key to select other ON or OFF Time ShiftBuf Sets up the time shift buffer length Use the lt gt key to select from Small Mid and Large for the buffer length of the Time Shift When your selections are complete press the EXIT key the changes will be saved in the system INSTRUCTIONS Recording Buffer In this submenu environment you can set a time buffer to the Start and End time of scheduled recordings to ensure that you catch the start and finish of a program should it start earlier or finish later than the original scheduled time advertised by the broadcaster Using this function will compromise your ability to set multiple back to back recordings as th2. Do not touch the power cord with a wet hand or continue to use a damaged power cord It may cause an electric shock Never open the cover High voltage in the unit may result in electrocution Disconnect the power cord to the unit before connecting any cables CAUTION To prevent fire or electrical shock do not expose the appliance to water Ensure that objects filled with liquids such as vases are not placed on the apparatus If an object or liquid gets into the unit disconnect the plug and ask an approved technician to check the unit Never place the unit in a confined space such as a bookcase or built in cabinet unless proper ventilation is provided Leave a 10cm gap around the unit The recommended operating temperature is from 40 C and humidity should be under 9595 For your own safety do not touch any part of the unit power lead or aerial lead during a lightning storm Use a damp cloth to clean the unit Do not use liquid cleaners solvent or abrasive products etc ASSEMBLY AND PARTS LIST 1 1 Parts List Please make sure the following accessories are supplied with the PVR D High Definition Personal Video Recorder PVR 2 Remote Control 3 RCA Video Audio Cable 4 Batteries AAA Size 5 User Manual 6 RF Loop Cable 1 2 Features Twin Tuner High Definition Personal Video Recorder Record two channels at the same time and watch a third channel fro
3. In this menu you can use the lt P button to set the TP Transponder No and settings then search programs from the TP set in the manual search parameters 1 Press OK on Manual Search in the Installation Menu the following screen will appear 2 Use the A V keys to select the item and change the settings with the lt P or number 0 9 keys Used to change input frequency 3 Once the settings have been entered press the OK key to scan the current channel or press the EXIT key to go back Mangal Search INSTRUCTIONS 2 5 2 Auto Search Use the A V keys to highlight Auto Search and press the OK key to initiate Auto Search of TV and RADIO programs in your region automatically The default password is 0000 The system will automatically search and save digital channels available in your area this will take around five minutes On completion the system will display Live TV to access a channel List press OK 2 5 3 Version Info Use A V buttons to select the Version Info Menu press OK and the menu will show the hardware and software version 2 5 4 Factory Default Deletes all the data and settings currently saved and returns the system to the initial state The default password is 0000 Use the A V keys to highlight Factory Default in the Installation Menu input the password then choose YES press the OK button to confirm that you want to reset the system the PVR will scan TV and RADIO programs automatically Factory De
4. Press the INFO key a second time to display detailed information for the NOW program 3 Press the INFO key again to display detailed information for the NEXT program 4 Press the INFO or EXIT key on the remote control to exit from the extended information environment Subtitle Press SUBT key to switch subtitle Closed Captions on off NOTE Not all programs have Closed Captions included Teletext service 1 Press TXT key to open a teletext page if teletext is transmitted 2 Press TXT key again or press EXIT key to close the teletext EPG Electric Program Guide Your PVR provides you with an electronic program guide for up to 8 days of programs in advance where available from the broadcaster which will allow you to view on a channel by channel basis and tag programs to be recorded to the Hard Drive 1 Press EPG key the remote control to activate the EPG Use the A V keys to scroll up and down to each channel Program information will be displayed in the right hand screen panel Use the lt gt keys to change dates in the EPG 2 Use the BLUE key to enter into the right hand screen panel where the programs are listed Use the A V keys to move up and down through the programs for that channel for that day 3 Press the YELLOW key to view detailed information for any highlighted event 4 Press the RED key to tag the highlighted program for recording a dialogue box will displayed providing options ONCE DAILY WEEKLY
5. select one and press OK a symbol will appear along side the program name The event has been added to the Book Manager 5 Press the BLUE key to return to the channel list Press EXIT to exit GETTING STARTED Navigation in the main menu 1 Press MENU key to bring up the main menu or return to previous item 2 Press lt gt keys to move left right 3 Press OK key to activate the highlighted menu item 4 Press EXIT key to exit the main menu The main menu is divided into 4 sections please refer to the menu tree below Menu Tree PVR amp Booking File List Book Manager Recording Option Storage Manager Calendar Game Parental Control AV Settings Channel Manager Time Settings Manual Search Auto Search Version Info Factory Default Upgrade INSTRUCTIONS 2 1 MENU INFORMATION lt Starting up for the First Time gt 1 Turn on your TV and PVR 2 Channels should already be scanned if you have followed the quick start wizard Press MENU key the main menu will be displayed PYR 5 Book s Fie List lt Navigation the main menu gt 1 Press MENU key to bring up the main menu 2 Press lt P key to move left right to the desired sub menu 3 Press OK key to enter into the sub menu you desire 4 Press EXIT key to exit the main menu 2 2 PVR amp Booking You can record TV programs to the built in hard drive and copy them to an external Hard Drive by USB You can record a program w
6. can Move Lock Unlock Delete channels and add or delete channels from the list to your favorites lists Move To move a channel use the A V keys to highlight the channel and then press the RED button A green check mark will be displayed next to the selected channel Use the A V keys to move the selected channel to the new position and press the RED button again to drop the channel in its new position Press EXIT to display a confirmation dialogue box press OK to confirm Yes or use the lt P keys to highlight No and press OK to discard your changes Lock lock unlock a channel Locking a Channel requires the PIN Code to be entered before it can be viewed Use the key to highlight the channel to be locked and press the Green button a blue lock symbol will be displayed along side the selected channel To confirm Locking the channel press EXIT and then press OK when the confirmation box has Yes highlighted To Unlock the Channel use the A V key to highlight the channel to be unlocked and press the Green key the lock symbol will disappear Confirm this action on EXIT from this submenu environment by pressing the OK key when Yes is highlighted in the confirmation dialogue box INSTRUCTIONS Delete You can delete selected channels Be aware that this function can completely delete saved channels When you delete a channel in the menu the channel is also deleted from the Favorite List lt gt Use button to switch between
7. the remote control 1 POWER Press to switch between operation and standby mode 2 oS 3 2 MTS Press to select an item the sound mode 3 AUDIO Select an item in the audio mode 4 NUMERIC KEYS Select channels and input numbers for codes xe nce 5 EXIT Press to return to the previous menu 7 MO gt or to escape from the current mode 6 Up Down V Change the channel or move the cursor in the menu 7 Left 4 Right Adjust volume or move cursor in the menu 8 PAGE PAGE Press to navigate to top and bottom of pages in the channel list and EPG 9 30 Red 30 Green 30sec jump backwards forward EXIT ONDES 10 P STD Selects the display resolution mode gz 12 OS 1080i 720p 576p PSTD LIST MARK V PORT 11 TV RADIO Press to switch between TV and RADIO mode PLAY STOP REC 12 09 MUTE Press to mute the sound 13 TEXT Display the Teletext information not AE UBER always available 14 SUBT Displays Closed Captions CC 15 FAV Press to display Favorite Channel Mode 16 ASPECT Press to select 4 3 or 16 9 aspect ratio mode 10 17 SCAN Press to automatically scan for digital channels 18 TIMER Enters Timer environment 19 MENU Displays or exits the Main Menu 20 OK Select a highlighted item in the menu or displays the channel list 21 i Displays current program information 22 RECALL Return the previous channel 23 FREEZE Yellow Freeze the v
8. this PVR allows you to set a Parental Rating Block for programs based on the Program Rating and Above For example if you set the Parental Block at the system will block viewing of all programs carrying a rating of G and above to view the program the user will need to input the PIN code Use the A V keys to select Parental Control in the Configuration menu then press OK to enter you will be asked to input your PIN code The default PIN code is 0000 Use to select the submenu press OK to enter or press EXIT to cancel Parental Control INSTRUCTIONS lt Lock Setting gt Menu Lock Use the d P keys to change the setting the Menu Lock submenu between and OFF When set at ON anyone wanting to access the MENU will be required to enter the PIN Code Start Lock Setting on Start Lock will require you to input a correct PIN code to watch programs that you have locked Parent Block Use the A V keys to highlight Parental Block use the lt P keys to navigate through the levels of Parental Block settings No Block Block All Block G and Above Block PG and Above Block M and Above Block MA and Above Block AV and Above Block R and Above Once you have selected the Parental Block level you require press EXIT to return to the previous level the Parental Block setting will be saved and you will need to enter the PIN Code to view programs with Parental rating at the set level or above lt
9. through all the available digital channels 3 Press the OK key on the remote control or front panel to display the channel list on screen then use the A keys to navigate through the list Press OK on the remote control or front panel to display any channel highlighted on the list or 4 Press the RECALL key to view the previous channel selected Volume control Press the lt gt key on the remote control or front panel to adjust the volume Mute 1 Press the MUTE key to temporarily stop the sound 2 To cancel mute press the MUTE key again Freezing the picture 1 Press FREEZE key to freeze current program the pause icon will appear on screen This function freezes the picture at that point in time only it is not timeshift If you want to initiate timeshift make sure that the timeshift function is active in the PVR Settings sub menu then press PAUSE on the remote control 2 To cancel Freeze and continue watching TV press the FREEZE key again the icon will disappear and the program will commence at the current time GETTING STARTED Change screen aspect ratio Press the ASPECT key to switch screen aspect mode 16 9 full screen 16 9 Letter box 4 3 full screen 4 3 letter box 4 3 panscan Change TV Radio mode Press TV Radio key to toggle between Digital TV and Digital radio mode View program info 1 Press the INFO key on the remote control to display basic information for NOW and NEXT programs on that channel 2
10. DIA 14 ZA MENU INE ORIMATIODN 1d ditate ned n edunt deme tea qe eue boues 14 S BOOKING Lm mI 14 I 20 24 CONFIGURATION as dte 22 ente 27 20 29 UE EID SC 30 2 8 TRANSFERRING COPYING RECORDED 31 2 0 SETA RECORDING E ERR Ml LES tux 31 240 PEAYBAGK OPERATION ROO EE 32 PST TROUBLE SHOOTING ot reece re See tee EE E 33 PS2 SPECIFICATION 34 SAFETY AND INSTRUCTIONS CAUTION TO PREVENT ELECTRICAL SHOCK DO NOT REMOVE THE COVER THERE ARE NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol indicates that high voltage is present inside It is dangerous to AN make contact with any part inside the case N This symbol alerts you of important information concerning operation and maintenance of this product SAFETY Never place the unit in hot humid or excessively dusty places Do not install the unit where it may be exposed to mechanical vibrations This product should be operated only from the type of power source indicated on the rear of the unit
11. External Hard Disk Drives connected to the PVR eREC 1 2 illuminates when the PVR is recording one or two programs 11 gt illuminates in accordance with the active function in playback mode TV Radio illuminates the active mode HD DOLBY Displayed when HDTV or Dolby is detected in the program lights up when timer events booked in the EPG or timer The signal quality and channel number will also be displayed on the front panel ASSEMBLY AND PARTS LIST 1 4 Rear Panel DO 00000 Antenna feed is connected to this Input Small loop cable is connected from IN2 to OUT 1 diagonally positioned 2 ANT OUT Used to connect an extra analogue or digital receiver 3 RS232 Serial Port For firmware update serial communication port RS 232 4 DIGITAL AUDIO S PDIF Optical Connects to an External Audio Amplifier with S PDIF Optical Digital Audio 5 USB USB port is used for viewing external files on a memory stick and for possible software upgrades To be advised by DGTEC technician 6 HDMI Connector Connects High Definition Multimedia output to HD Monitors HDMI Type 7 YPbPr Connects component video to HD Monitors YPbPr Type 8 AUDIO L R White Red RCA Connects to a TV audio input HD Monitors audio input or an External Audio Amplifier 9 VIDEO Yellow RCA Connects to a TV with video input ASSEMBLY AND PARTS LIST 1 5 Remote Control Unit All PVR features can be operated with
12. Password Setting gt The default password is 0000 To change the current Password Use the A V keys to highlight the Password Setting menu then press OK Enter the old password and then the new password confirm the new password in the dialogue box then press OK to complete the setting INSTRUCTIONS Ce a e 9 LE NE I o 9 2 4 2 AV Settings Use the A V keys to highlight AV SETTINGS in the CONFIGRATION menu environment and press OK to display the submenu options Transparency Resolution Ratio ARConversion and Dolby Digital In this menu you can use the A P button to change the settings A V to select the item or press EXIT to cancel Transparency This setting controls the OSD transparency level Resolution You can select the display mode to suit your TV or Monitor 10801 720 576 Ratio You can switch aspect ratio between 4 3 and 16 9 Widescreen ARconversion You can select the ARconversion mode Ignore Pan amp Scan LetterBox Combined to adjust the picture format to suit your TV or Monitor This function is available on INSTRUCTIONS the remote control as well ASPECT key Dolby Digital You can set the Dolby digital audio type to either PCM or AC3 Not all free to Air broadcast services provide Dolby Digital audio track check the program information for more details 2 4 3 Channel Manager Use the A V key to highlight the channel to be managed In this menu environment you
13. THE FUTURE OF HOME ENTERTAINMENT USER MANUAL High Definition Personal Video Recorder Technical Support 1800 189 941 DG FV1TBPVR A clever 4175 product HELP PROVIDED NEED HELP If you are experiencing difficulty operating this product or require set up assistance please contact the DGTEC Service Centre The call is free from anywhere in Australia Our operators will assist you in plain English without the technical jargon Call 1800 189 941 Australia 8 00am 6 00pm Australian EST Subject to change without notice INDEXA c 2 SAFETY AND INSTRUCTIONS iiec ea co oce ee eee ceu ce tcu d eue ode eaa e Lega oe ve ou Ua el 3 2 4 Lob 4 TZ EEATDRSES 4 TS ERONTE PANEL niai tera D Qt warner iL DEA 5 TAREAR PANEL NEG 6 TS REMOTE C ONTROE UNT ausge tenn eA aote 7 1 6 INSTALLING THE BATTERIES IN THE REMOTE 8 CONNECTING TO EQUIPMENT 5 ertet 9 GETTING STARTED 11 INSTRUCTIONS eit totas REME
14. TV and FAV channel lists FAV Use FAV button to change FAV lists You can create up to 3 lists of your favorite channels The default favorite list names are FAV1 FAV2 FAV3 Use the A V keys to highlight the channel to be added to you selected Favorites List Press OK to add the channel to the current favorites list A channel can be included in more than one favorite list You can navigate through the favorite lists by pressing the FAV button Use the FAV key on the remote control to activate the favorites lists press repeatedly to scroll through the three lists 2 4 4 Time Settings Use the A V keys to highlight TIME SETTINGS the CONFIGRATION menu environment and press OK to display the submenu options Use the lt P keys to change the Local Time and settings use A V to select the item or press EXIT to cancel Time Zone Use lt gt keys to set the time using GMT in the Time Zone setting Summer Time Use lt P keys to set the Summer Time mode to ON OFF INSTRUCTIONS 2 5 Installation Use the lt B keys to highlight INSTALLATION in the MAIN MENU use the A V keys to highlight one of the following selections and press OK to enter that submenu environment Manual Search Auto Search Version Info Factory Default and Upgrade installation fenual 5e 2 5 1 Manual Search To use manual search it is recommended that you have a good understanding of the services available in your local area
15. YBACK OPERATION This PVR will allow you to playback recorded files TS recorded on this unit MP3 and JPEG format from either the internal HDD or an external storage device connected to the USB port at the rear of this unit 1 Press the LIST key on the remotes control or go to FILE LIST in the PVR amp BOOKING submenu of the MAIN MENU to display the file contents of the HDD If you have connected a USB drive to the USB port on the rear of the PVR there will be two options available hdd this is the internal hard drive and udisk this will be the external device you have connected by the USB port on the rear of the unit 2 Usethe A V keys to highlight your selection and press OK the contents of the selected drive will be displayed 3 Usethe A V keys to highlight the recorded file you want to copy and press the OK key on the remote control to commence playing the file See page 15 for more information TROUBLE SHOOTING Ps1 Trouble Shooting Check the PVR according to the procedures detailed below If the PVR does not work properly after conducting Problem Solving Protocols please contact the DGTEC technical department on 1800 189 941 This unit contains dangerous voltages never remove the cover When not in use for a long period it is recommended that you unplug the unit from the main power socket HN Check the power cord for defects No Power Check mains power switch is on Press power button on RCU Chec
16. be found in the Main Menu 2 Timer Recording Timer recordings can be set for any time in the future and can be accessed using the Timer key on the remote control or by selecting Book Manager from the PVR amp Booking menu in the Main Menu In this environment you can set and manage numerous timer events press the RED key to ADD a Timer Event and follow the on screen prompts INSTRUCTIONS 3 EPG Recording Set a recording event using the Extended Program Guide EPG by pressing the EPG key BLUE on the remote control Select the program list by pressing the BLUE key and highlight the program you want to record then press the RED key to avtivate the recording frequency dialogue box make your selection then press OK the recording symbol will appear next to the program to be recorded 4 TimeShit Timeshift is activated by pressing the PAUSE key on the remote control and is often referred to as Pause Live TV Timeshift does not save the file when you are ready to resume watching the paused program press the PAUSE key again Fast Forward Skip and Rewind are available while playing back the Timeshift file 5 Channel list Press OK at any time to display the channel list Use the A V keys to highlight a channel and press the RED key to commence recording the program playing on the highlighted channel To record the NEXT program on the highlighted channel use the key to display the program title then press the RED key 2 10 PLA
17. display Teletext Where available from broadcasters TV Radio and Favorite List in Simple Mode Press OK on the remote control to activate the channel list which is displayed on the left side of the screen Use the A V keys to navigate through the channel list the program title NOW playing will be displayed along with a REC prompt should you wish to record the program To view the highlighted channel press the OK key Use the lt P keys to navigate between NOW and NEXT for the highlighted channel in the channel list use the REC feature to book a recording for the NEXT program should you wish You can switch between TV and Radio lists by pressing the TV RADIO button You can select a favorite list by pressing the FAV button You can view channels by pressing the A V keys lt Time Shift gt Press the PAUSE key on the remote control to enter time Shift mode to commence replaying from where you activated Time Shift press the PAUSE key again INSTRUCTIONS 2 8 TRANSFERRING Copying RECORDED FILES This PVR allows you to transfer recorded files to and from the HDD via USB on the rear panel of the unit Press the LIST key on the remote control or go to FILE LIST in the PVR amp BOOKING submenu of the MAIN MENU to display the file contents of the HDD If you have connected a USB drive to the USB port on the rear of the PVR there will be two options available hdd this is the internal hard drive and udisk this will be the e
18. e AV inputs of the television to establish audio connection Terbis HD Degilas abes eirca Eacaedar MADE Pd CHINA NOTE PLEASE ENSURE THAT YOU HAVE THE SHOWN ON IMAGE l C AUDIO Note Please ensure that your TV is set to the correct input channel depending on your connection type GETTING STARTED First time installation After all the connections have been established switch on your TV If you are using the PVR for the first time or you have restored it to factory default channel search will automatically commence and save all digital channels found after you have selected the correct bandwidth 7MHz for Australia now When scanning is complete all active digital channels found will be stored automatically in the Channel List The system will search for and store digital TV and digital Radio Channels in separate lists To view the lists use the TV RADIO key on the remote control to select either TV or Radio then press OK to display the list of available digital channels To stop scanning at any stage press the EXIT key on the remote control all channels scanned to that point will be stored Now you are ready to watch digital TV Changing Channels There are four methods for changing channels 1 Press the NUMERIC keys 0 9 on the remote control to select the logical channel number you wish to view 2 Use the A V keys on the remote control or the front panel to navigate
19. e file from the USB drive and press to play 20 INSTRUCTIONS Note Do not remove the USB device when playing files from in the USB storage device This device supports the playback of MP3 format audio files JPEG or BMP format images and recordings made on this PVR only Do not remove the USB device when recording or playing back the recorded files It may cause damage to recorded files 2 3 2 Calendar Use the A V keys to select Calendar in the Utility Menu and press OK to enter Select the date using the V W select the month using Page Page use the numerical keys to input the year and use EXIT to leave the Calendar submenu environment 2 3 3 Game There are two games to play push box and Tetris Use the A V keys to highlight Game in the Utility menu and press OK to enter Select one of the games using the A V keys then press OK to enter INSTRUCTIONS 2 4 Configuration Use the keys to scroll right when the main menu is displayed and press OK when Configuration is highlighted The following screen will be displayed in this environment you can manage Parental Control AV Settings Channel manager and Time Settings 00 MC Longo stron Z2 ZI Use the A V keys to select a submenu item then press OK to enter 2 4 1 Parental Control Parental Guidance ratings are carried in the Free to Air Broadcasters streams and are program specific Each program should carry a Parental Rating
20. e program recording lengths will be increased by the number of minutes set in the buffer Use the keys to add the number of minutes you wish to increase the start and finish times for all recording events On EXIT your changes will be saved 2 2 4 Storage Manager In the Storage Manager menu you can manage the built in hard drive Press keys to select the submenu item then press OK to enter press EXIT to exit Some submenus require the password to enter INSTRUCTIONS HDD Info Displays information detailing Disk Space Free Space and Free Rate Format Reformats the HDD Remember reformatting the HDD will result in the loss of all previously saved recorded and other files on the HDD Note The default password is 0000 2 3 Utility In this menu environment you will find these features Media Show Calendar and Games Use the A V key to highlight the item press OK to enter ORON E unnig lodia SS Note This PVR can also view the files stored in the external USB storage device To use an external USB storage device you must connect the external USB storage device to the USB port of the PVR 2 3 1 Media Show In this menu you can play MP3 and JPEG files stored from the USB storage device Press OK in Media Show in the Utility menu to display playable files contained on the USB drive connected to the PVR File List ALL hdd PIDEN Use keys to highlight a playabl
21. fault Confirm Reset INSTRUCTIONS 2 5 5 Upgrade An upgrade can be performed using the USB port Only to be performed on advice by a DGTEC technician 2 6 EPG The Extended Program Guide EPG displays program information for all channels for the current day and the following 7 days Press EPG key on the remote control to activate the EPG In this environment you can view programs on each channel and make timer event bookings up to 7 days in advance DATAN 9 L Use the A V keys to navigate through the available channels the EPG for the highlighted channel will be displayed for the current day plus the next 7 days Use the 4 gt keys to navigate through the next 7 days of programming Press the BLUE Alter button to enter into the program information pane or return back to the channel list from the program pane at any time Use the YELLOW Key to activate information for the highlighted program Press the RED key on a highlighted program to tag a recording event A dialogue box will prompt you to select from Once Daily or Weekly Once this is done a timer event symbol will appear next to the tagged event Press the GREEN key to enter the Book Manager submenu environment where you can manually enter a timer event Press the EXIT button to close the EPG menu INSTRUCTIONS 2 7 TeleText If you have selected a channel that contains teletext data you can press TEXT button to
22. he date and start time for your timer event Mode Select Once Daily Weekly from the list Once use this setting for one off timer event Daily use this option to record at the same time and duration every day suitable for daily program series Weekly use this option to record at the same time and duration once a week suitable for weekly program series Event There are three options for a recording event Power Off use this selection to turn the PVR off at a designated time Record use this option when you want the system to record a program Live Play use this option if you would like the system to change to the channel you select in this timer event at the designated time INSTRUCTIONS Channel Press OK to display the channel list use the A V keys to highlight the channel for the timer event and press OK to confirm your selection The selection will be added in the Channel row Rec Duration Use the V keys to highlight REC Duration then use the lt keys to move the yellow cursor under the appropriate numeric columns representing the number of minutes for the scheduled timer event Use the numeric keys to enter the number of minutes for the timer event Press EXIT to exit the system will display a confirmation dialogue box to save the timer event and add it to your Booking List Press OK to confirm Yes if you want to save the event or use the lt 4 B keys to highlight No to exit without saving once
23. hile watching another one with this PVR You can record two different programs while watching another one only if these three programs are in two different TP s or the same TP Press the gt keys to choose PVR amp Booking in the main menu then press OK key the PVR will enter the PVR amp Booking menu INSTRUCTIONS PYR 5 Book E Fie List B Press V keys to choose the submenu and then press OK to enter Note To use an external USB storage device you must connect the external USB storage device to the USB port of the PVR 2 2 1 File List You can see the files stored in the external USB storage device as well as the built in hard drive in the File List menu Choose File List in the PVR amp Booking menu press OK to enter If there is an external hard drive you can choose to enter the external USB storage device or the built in hard drive AL gt 2472204 001253 If you enter the built in hard 5 file list you can playback recorded programs even the files copied from other the external USB storage device Press V keys to choose the files and then press OK to play In playback mode you can use these special keys to control PLAY Press to play a selected recorded program PAUSE If Press to pause playing or recording program REW X2 X4 X8 X16 Fast Rewind INSTRUCTIONS FF hl X2 X4 X8 X16 Fast Forward JUMP lt lt Skip Fast Rewind JUMP g
24. ideo output of the PVR this is not Timeshift press Pause to activate Timeshift 24 EPG Blue Displays the 8 day Electronic Program Guide ASSEMBLY AND PARTS LIST 1 6 Installing the batteries in the remote control 1 Press down on the retaining catch on the lid of the battery recess on the remote control and slide downward to remove the lid 2 Insert two AAA batteries into the recess 3 Replace the lid over the recess and gently push down on the lid and slide upward until it snaps firmly into place Caution 1 Keep batteries out of the reach of children 2 Do not attempt to recharge short circuit disassemble heat or throw the batteries into the fire 3 Always replace both batteries at the same time Never mix new and old batteries or batteries of a different type 4 If you don t intend to use the remote control for an extended period remove the batteries to prevent possible leakage and corrosion 5 Do not drop apply shock or step on the remote control 6 Do not spill water on the remote control Note If the PVR does not respond when operating the remote control from a close range you will need to replace the batteries Using the Remote Control 1 To use the remote control point it towards the front of the PVR 2 The remote control has a range of up to 7 metres from the PVR at an angle of up to 60 degrees 3 The remote control will not operate if its path to the sensor on the front panel of the PVR is bloc
25. k the Signal Strength Indictor and check No Reception the antenna cable and that the antenna has been inserted correctly Check the audio cable connection No Video Check the video cable connection The remote control is in operation Check the batteries but the PVR is not responding Check the battery contact Check that the loop cable is correctly connected Cannot record two channels at the between the two tuners on the rear panel of the PVR same time am setting recording in the timer Check to make sure you are selecting the but they are not recording RECORD action for the timer event You need to go to the PVR Function setting in press Pause but Timeshift does P the Main Menu to activate Timeshift before it not work will work No Channels in the Channel List Please rescan channels SPECIFICATION Ps2 Specification Ses Owes seston Display Video Type 10801 720 576 HD Video Output YPbPr HDMI SD Video Output Type CVBS Algorithm ISO IEC 13818 2 MP HL MP ML Video Algorithm MPEG 1 layer and II Ac3 Frequency Response 20Hz 20k Hz O 6dBu Sampling Frequency 32 44 1 48KHz Audio Output Type Stereo RCA photo jack Digital Audio Output S PDIF Optical Power Operating Frequency 50 60Hz Operating Temperature 0 40 C Environmental Weight Around 3 5kg Condition Dimension 355mm W x 240mm D x 60mm H Code Modes 1 2 2 3 3 4 5 6 7 8 Note 1 This product complies with legal sta
26. ked Note Sunlight or very bright light will decrease the sensitivity of the remote control ASSEMBLY AND PARTS LIST 1 7 Connecting to Equipment 1 Connect your TV antenna cable to the ANT IN jack on the back of the PVR using coaxial RF cable Make sure the loop cable is connected correctly to activate the second tuner see the diagram below YPbPr connection 2 Connect the YPbPr output connectors three RCA connectors green red and blue for video from the rear panel of the PVR to the COMPONENT IN on your television matching colour for colour and AUDIO L R output connectors two RCA connectors red and white for audio from rear panel of the PVR to the corresponding audio input of your television NOTE PLEASE ENSURE THAT TV Rear Panel TV HDMI High Definition Multimedia Interface HDMI provides both high quality digital video and audio connection in one cable 3 Connect the HDMI cable from the HDMI output on the rear panel of the PVR to the corresponding HDMI input of HDTV or Amplifier using HDMI cable for both Video and Audio connections SHOWN ON IMAGE TV Rear Panel HDTV ASSEMBLY AND PARTS LIST NENNEN VIDEO 4 Connect the yellow video lead from the yellow video output on the rear panel of the PVR to the yellow Video input on your television to establish video connection Connect AUDIO L R red and white lead from the connectors on the rear of the PVR to the red and whit
27. m the same bandwidth For example record channels 7 and 9 and watch either channel 72 or channel 99 Record two channels at the same time and watch a recorded file in playback Chase play a file that is recording Timeshift press the PAUSE key on the remote to pause Live TV Set your recordings a week ahead using the EPG View JPEG files and play MP3s from a USB drive Records programs from standby mode Copy files from HDD to USB or USB to HDD ASSEMBLY AND PARTS LIST 1 3 Front Panel DG HD1TBPVR D 2 9 amp 6 6 2 1 Standby Button Press to switch between operation and standby modes The blue LED illuminates when in the standby mode 2 Volume Left Right Button lt gt Moves the cursor left right when in the menu or adjusts the volume level in operational mode 3 CH UP Down Button A V Moves the cursor up down when in the menu or changes the current program to the previous next channel in operational mode 4 OK Button OK Press to select an item in the menu or to activate the Channel List in operational mode 5 Menu Button MENU Press to display the Main Menu or to exit from the menu 6 Infrared Remote Sensor IR A hidden sensor senses infrared signal from the remote control 7 Front Panel Display Front panel window displays operational information Not all symbols featured below can be displayed at the same time USB HDD lights up when there is USB 2 0 Flash Drive USB 2 0
28. ndards and is manufactured under constant quality control 2 Technical specifications are up to date at the time of printing however can be subject to changes without prior notice
29. t P Skip Fast Forward 1 Display program information In the File list environment Press the RED key to delete the highlighted file Press the GREEN key to copy the highlighted file to the external USB storage device You can continue watching TV or even record while copying a file Use the YELLOW key to rename the highlighted file Press EXIT to exit the menu 2 2 2 Book Manager Book Manager Lists the recording events that you have scheduled using the Book Manager and the EPG In this environment you can manage your scheduled recordings Use the A V keys to highlight a recording event in the list or press EXIT key to exit the menu INSTRUCTIONS RED key adds a scheduled recording event Press the RED key to activate the Book Manager sub Menu dialogue box below GREEN key deletes a scheduled recording event use the V keys to highlight the scheduled event you want to delete press the green key to delete the event YELLOW key deletes all booked recording events in the list If you have active recordings you will need to stop them first BLUE key is used to edit an existing timer event booking entry use the V keys to highlight the scheduled event you want to edit then press the BLUE key to activate the booking information After making your changes press EXIT and then OK to confirm the change To exit without saving the change use the lt P keys to highlight No and press OK Date Start Time Enter t
30. xternal device you have connected by the USB port on the rear of the unit Copying files from the HDD to USB allows you to store your favorite recorded programs on an external drive and play them back whenever you wish leaving your HDD space free for new recordings 1 Usethe V keys to highlight your selection and press OK the contents of the selected drive will be displayed 2 Usethe A V keys to highlight the recorded file you want to copy and press the GREEN key on the remote control 3 Adialogue box will be displayed asking you to confirm the destination drive for the file to be copied if copying from hdd the destination drive will be udisk press OK to continue 4 Copying of the file will commence the system will return you to live TV A small copying icon will be displayed on right side of the screen When copying is complete a dialogue box will be displayed informing you that the process is now complete While the file is copying the system will still allow you to watch any channel on live TV and record programs you can even watch a previously recorded file in playback 2 9 SET A RECORDING There are 5 different ways to setup or start a recording 1 One Touch Recording One touch recording is simply activated by pressing the record key on the remote control recording will commence immediately One Touch Recordings will record for the duration set in REC Time in the Recording Options submenu of PVR amp Booking which can
Download Pdf Manuals
Related Search