ManualsLib - Makes it easy to find manuals online!
Contents
1. R LINE OUT Jacks and the AUX IN of your Audio Amplifier Connection cable is not included 2 Select the music source by setting the Function Selector 12 to PHONO USB SD or TUNER as desired 3 Turn on the external Amplifier EN 12 Downloaded from www Manualslib com manuals search engine 4 Sound will then come out from the system s built in soeakers and the external Amplifier s speakers simultaneously 5 Set the VOLUME CONTROL 23 to MIN and adjust the sound level using the VOLUME CONTROL on the external Amplifier as desired 6 Turn the System and the external Amplifier off when you have finished listening 7 Unplug the connection cable USING HEADPHONES NOT INCLUDED This System accepts stereo headphones with a 3 5mm plug and an impedance of 8 ohms or greater Inserting the plug of your headphones into the Headphone jack 21 will enable you to listen privately When using headphones the speakers will be disconnected automatically READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES 1 Avoid extended play at very high volume as it may impair your hearing 2 If you experience ringing in your ears reduce the volume or shut off your unit 3 Keep the volume at a reasonable level even if your headset is an open air type designed to allow you to hear outside sounds Please note that excessively high volume may still block outside sounds NOTE We recommend that you reduce th2. such as a duplicate copy of a sales receipt You must pay all shipping charges required to ship the product to SPECTRA for warranty service If the product is repaired or replaced under warranty the return charges will be at SPECTRA s expense There are no other express warranties other than those stated herein This warranty is valid only in accordance with the conditions set forth below 1 The warranty applies to the SPECTRA product only while a It remains in the possession of the original purchaser and proof of purchase is demonstrated b It has not been subjected to accident misuse abuse improper service usage outside the descriptions and warnings covered within the user manual or non SPECTRA approved modifications c Claims are made within the warranty period 2 This warranty does not cover damage or equipment failure caused by electrical wiring not in compliance with electrical codes or SPECTRA user manual specifications or failure to provide reasonable care and necessary maintenance as outlined in the user manual 3 Warranty of all SPECTRA products applies to residential use only and is void when products are used in a nonresidential environment or installed outside the United States This warranty gives you specific legal rights and you may also have other rights which vary from state to state TO OBTAIN SERVICE please remove all batteries if any and pack the unit carefully and send it freight prepaid to SPECTRA at the addr
3. input Repeat points 2 and 3 to enter the desired tracks up to max 32 selections Press the pas button 1 once to start playback in your programmed sequence To clear the program memory while playing press the Stop button 3 2 times or select TUNER PHONO function or turn the System off oo COPYING FILES BETWEEN USB AND CARD The files stored on your USB flash drive or on the SD MMC card can be copied to each other Please follow the instructions below to copy the files between the USB port and the Card slot The following tasks can be accomplished by either using the controls on the REMOTE Control or those which have similar function markings on the JTA 460 main unit This icon indicates that a task can only be performed using the controls on JTA 460 1 Insert your USB flash drive into the USB PORT 22 and the SD MMC Memory Card into the SD MMC Slot 20 2 Select the USB CARD function mode by setting the Function selector 12 to USB CARD The total number of tracks on the USB will be displayed and playback will automatically start from the first track 3 Press the STOP USB SD Button 3 once to stop the playback Copy of the USB files to the Card is now ready to proceed any time If you want to copy the files from the Card to the USB you need to enter the Card playback Stop mode first then proceed to Step 4 below for copying USB Playback Stop Mode Card Playback Stop Mode oOo EN 11 Downloaded fro
4. insulation DO NOT REMOVE THE CABINET COVER OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY 1 Read these Instructions Keep these Instructions Heed all Warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth of pi e A EN 1 Downloaded from www Manualslib com manuals search engine 7 Do not block any of the ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injur
5. reception is weak change the position of cabinet until the internal antenna picks up the strongest AM signal FM During FM reception always keep the FM Wire Antenna fully extended If FM reception is weak try repositioning the FM Wire Antenna until you find the strongest FM signal BASS BOOST OPERATION To enhance the low frequency sound press the BASS BOOST BUTTON 18 once button in to activate Press the BASS BOOST Button 13 again button out to turn the Bass Boost off Note Please refer to the ON OFF graphic on the Front Panel for correct operation of the Bass Boost function PLAYING PHONO RECORDS Raise the Turntable Dust Cover Remove the stylus protector and release the Tone Arm Clamp 6 M Fuono Slide the Function Selector 12 to PHONO LUTI Place a record on the turntable over the center spindle Set the Speed Selector Switch to 33 45 or 78 rom according to the record you are playing Place the included 45 RPM adaptor 2 over the center spindle when playing 45 rpm records Move the Tone Arm to the beginning of the record or to the beginning of a particular track Gently lower the Tone Arm onto the record to start playing Adjust the Volume if needed The Turntable will stop automatically when the record finishes 7 To stop the record before it ends lift the Tone Arm 4 using the Cue lever 3 and return it carefully onto the Tone Arm Clamp 6 8 Replace the stylus protector on the stylus when not in
6. small self adhesive felt pads available at hardware stores and home improvement centers everywhere and apply these pads to the bottom of the rubber feet before you place the product on fine wooden furniture EN 3 Downloaded from www Manualslib com manuals search engine LOCATION OF CONTROLS MAIN UNIT Before use detach the stylus guard white plastic cover by puling it straight off the front of the cartridge in the direction of the arrow a 27 Auto Stop ON OFF Selector EN 4 Downloaded from www Manualslib com manuals search engine REMOTE CONTROL UNIT 1 PLAY PAUSE BUTTON 2 RECORD BUTTON 3 STOP USB SD BUTTON noe 4 SKIP BUTTON oN rN S 5 SKIP BUTTON WY Q Le 6 DISPLAY BUTTON Raker 7 PROG BUTTON eteale 8 MODE BUTTON M S 9 FOLDER UP BUTTON a DELETE 10 FOLDER DOWN BUTTON 4 e 11 DELETE BUTTON IMPORTANT NOTES Avoid installing the unit in locations described below e Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters e Dusty humid or moist places e Places subject to constant vibration POWER SOURCE This Unit is designed to only operate on normal 120V 60Hz household power Do not attempt to operate the System using any other power source You could cause damage to the unit and void your warranty The remote control unit operates on 1 CR2025 Lithium battery Included AC OPERATION 1 Plug the AC PO
7. JENSEN audio MODEL JTA 460 3 SPEED STEREO TURNTABLE WITH MP3 ENCODING AND AM FM STEREO RADIO USER MANUAL PLEASE READ THIS OPERATING MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN IT FOR FUTURE REFERENCE Downloaded from www Manualslib com manuals search engine IMPORTANT SAFETY INSTRUCTIONS WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE DO NOT OPEN THE CABINET REFER SERVICING TO QUALIFIED PERSONNEL ONLY A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The ngnionmg Taen and arrow CAUTION TO REDUCE THE RISK OF ELECTRIC Te en pae Weer head within the triangle is a the triangle is a Warning sign dangerous voltage inside the SERVICEABLE PARTS INSIDE REFER SERVICING TO Instructions accompanying the product QUALIFIED SERVICE PERSONNEL product CAUTION PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER S MANUAL AND THOSE MARKED ON THE UNIT KEEP THESE INSTRUCTIONS RETAIN THIS BOOKLET FOR FUTURE REFERENCE This set has been designed and manufactured to assure personal safety Improper use can result in electric shock or fire hazard The safeguards incorporated in this unit will protect you if you observe the following procedures for installation use and servicing This unit does not contain any parts that can be repaired by the user The symbol for class Il Double
8. WER CORD into a 120V AC 60Hz outlet 2 Turn the System on by sliding the Function Selector 12 to either TUNER USB SD or PHONO The LCD backlight will turn on Remarks lf there is a malfunction due to electrostatic discharge ESD reset the unit by unplugging the AC CORD from the outlet wait 30 seconds and then plug the AC CORD in again to reset to normal operation ACTIVATING THE REMOTE CONTROL Remove the plastic insulator tag sticking out of the Battery Compartment of the Remote Control by pulling on it Once the tag is removed the Remote Control will be ready for use Downloaded from www Manualslib com manuals search engine BATTERY CARE i If the unit is not to be used for an extended period of time remove the battery An old or leaking battery can cause damage to the Remote Control li Do not dispose of batteries in fire batteries may explode or leak BATTERY REPLACEMENT When the battery becomes weak the operating distance of the peso Remote Control is greatly reduced and you will need to replace the S Lithium battery j Pns 1 Remove the battery compartment from bottom of the Remote LS Control 2 Install 1 CR2025 Lithium battery with the positive side facing up 3 Replace the battery compartment IMPORTANT Be sure that the battery is installed correctly Wrong polarity may damage the Remote Control and void the warranty USING THE REMOTE CONTROL CORRECTLY Note The Rem
9. at will have all the songs from the side of the record playing one after the other EN 8 Downloaded from www Manualslib com manuals search engine USB CARD OPERATION The following tasks can be accomplished by either using the controls on the REMOTE Control or those which have similar function markings on the JTA 460 main unit This icon indicates that a task can only be performed using the controls on JTA 460 1 Select the USB CARD function mode by setting the Function selector 12 to USB CARD The Display will show USB NO when the USB port is empty 2 Insert either a USB flash drive into the USB PORT 22 or an SD MMC Memory Card into the SD MMC Slot 20 Press and hold the STOP USB CARD Button 3 for 2 seconds to switch between USB and CARD modes if necessary 3 The total number of tracks on the USB or SD MMC card will be displayed and playback will automatically start from the first track depending which mode you have chosen USB or CARD CARD MP3 NOTE i Only MP3 file formats are supported li Not all brands of USB flash drives are supported iii The Display will show NOF if there are no MP3 files on the USB or SD MMC card you inserted 4 To interrupt playback press the pa button 1 The track being played will flash 5 To resume playback press the pas Button 1 again 6 Press the DISPLAY Button 6 once then the Title Artist and Album of the playing song if available will be displayed on
10. ay e The AC outlet has no power e Try the unit on another outlet Poor AM or FM e Weak signal on distant stations Rotate the cabinet for better reception g E e The volume Control has been e Turn the Volume control to a Unit ON but there is turned all the way down higher output low or no volume e Headphones are inserted into the Headphone jack e Pull the headphones out m At Spectra environmental and social responsibility is a core value of SPECTRA our business We are dedicated to continuous implementation of T F geen responsible initiatives with an aim to conserve and maintain the environment through responsible recycling Please visit us at http www spectraintl com green htm for more information on Spectra s green initiatives or to find a recycler in your area EN 14 Downloaded from www Manualslib com manuals search engine 90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U S A ONLY SPECTRA MERCHANDISING INTERNATIONAL INC warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U S A This warranty is not assignable or transferable Our obligation under this warranty is the repair or replacement of the defective unit or any part thereof except batteries when it is returned to the SPECTRA Service Department accompanied by proof of the date of original consumer purchase
11. e by one on the LCD 7 To stop playback briefly press the STOP button 3 TRACK SKIP To select a particular track in Stop mode or during playback press the pp or meq Buttons 4 5 repeatedly until the desired track number appears on the display The selected track will start playback automatically FOLDER SKIP To select a particular folder in Stop mode or during playback press the P gt lt lt Button 9 10 until the track number first track number of the Aloum appears in the Display Playback of the first track of the selected folder will start automatically REPEAT 1 FOLDER ALL PLAYBACK 1 During playback if you want to repeat the same track simply press the MODE 8 Button once appears in the Display EN 9 Downloaded from www Manualslib com manuals search engine 2 The track will be repeated and stop until the STOP Button 3 is pressed 3 To repeat a Folder press the MODE button 8 twice FOLDER will light up a The selected Folder will be repeated and stop until the STOP Button 3 is pressed 4 To repeat all the tracks press the MODE Button 8 3 times and the Repeat All Indicator amp will light up 5 All the tracks of the storing device will be repeated until the STOP Button 3 is pressed 6 To cancel repeat play press the MODE button 8 repeatedly until all the repeat indicator disappear in the Display INTRO PLAY This function enables the first 10 seconds
12. e volume control to a lower level before putting on the headphones After putting on the headphones gradually increase the volume to a comfortable listening level STYLUS REPLACEMENT PLEASE REFER TO THE DIAGRAM BELOW TO REPLACE THE STYLUS NO ADDITIONAL STYLUS IS SUPPLIED WITH THE SYSTEM 1 Loose the red part stylus by 2 Replace the new stylus as screw driver and take out as CandD diagram not supply diagram AandB we PF PX a a i i 7 a Z A Guide Pins inside Ls 5 A 5 p k at ay ie XTU Alp L A 7 p i ye r ji f i Y EN 13 Downloaded from www Manualslib com manuals search engine CARE AND MAINTENANCE 1 Clean your unit with a damp never wet cloth Solvent or detergent should never be used 2 Avoid leaving your unit in direct sunlight or in hot humid or dusty places Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors Always clean the outside of the cabinet thoroughly if it becomes wet with moisture or water splashes This will help to prevent the internal parts of the unit from entry of water and possible moisture damage TROUBLESHOOTING GUIDE Should you experience difficulties in the use of this player please refer to the following chart or call 1 800 777 5331 for Customer Service PROBLEM POSSIBLE CAUSE REMEDY e The unit is disconnected from e Connect to an outlet The unit will not ine AU outiet p
13. ess shown below IF THE UNIT IS RETURNED WITHIN THE WARRANTY PERIOD shown above please include a proof of purchase dated cash register receipt so that we may establish your eligibility for warranty service and repair of the unit without cost Also include a note with a description explaining how the unit is defective A customer service representative may need to contact you regarding the status of your repair so please include your name address phone number and email address to expedite the process IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD please include a check for 50 00 to cover the cost of repair handling and return postage All out of warranty returns must be sent prepaid It is recommended that you contact SPECTRA first at 1 800 777 5331 or by email at custserv spectraintl com for updated information on the unit requiring service In some cases the model you have may be discontinued and SPECTRA reserves the right to offer alternative options for repair or replacement SPECTRA MERCHANDISING INTERNATIONAL INC 4230 North Normandy Avenue Chicago IL60634 USA 1 800 777 5331 To register your product visit the link on the website below to enter your information http www spectraintl com wform htm Printed in China EN 15 Downloaded from www Manualslib com manuals search engine
14. m www Manualslib com manuals search engine 4 To start copying briefly press the RECORD Button 2 once Flashing CHE will appear briefly and disappear in the Display and copying will then start right away Note CHE means CHECKING Every file to be copied will be checked before copying starts cia Wee LI hy 7 a USB 4H Copying USB Files to Card Copying Card Files to USB 5 To stop copying briefly press the STOP Button once DELETING FILES 1 With the USB or Card in the playback stop mode press gt or k lt Buttons to select the track to delete for example track 5 is selected 2 When the desired track appears in the Display press the DELETE Button 11 to confirm DEL will flash few times and then disappear The chosen track 005 will appear and blink in the Display to prompt for confirmation In case you want to cancel the delete function just briefly press the STOP Button 3 To confirm briefly press the RECORD button 2 once DEL will appear steadily in the Display for few seconds and then the Display will resume to USB Card playback stop mode with the total track number deducted by 1 Original 38 Files After Deleting track 5 4 Repeat 1 3 above to delete more tracks as desired For better playback sound you can connect the JTA 460 to an external Audio Amplifier via the RCA LINE OUT JACKS located at the back panel Please proceed as following 1 Connect the L amp
15. of each track to be played 1 During playback press the MODE button 8 four times the Intro Indicator INTRO will light up 2 Press the button once to start playback from the next track 3 To cancel intro play press the MODE Button 8 twice RANDOM PLAY 1 During palyback press the MODE button 8 five times the Random Indicator RADDOM will light up RANDOM ae 2 Press the button once A track is selected at random and playback starts 3 To cancel random play press the MODE Button 8 again The Random Indicator RANDOM disappears in the Display EN 10 Downloaded from www Manualslib com manuals search engine PROGRAMMED PLAY Programmed play can only be achieved in Stop mode 1 In stop mode briefly press the PROG button 7 on the unit Program Channel No P1 will briefly appear P will then disappear leaving the Program Indicator PROG and 1 flash in the Display to prompt for input 2 Press the gt gt I or Ke Buttons 4 5 to select your desired track to be stored in the program For example the first selection is track no 5 3 Press the PROG button 7 to confirmed when track No 5 flashed in the Display The first program selection is now stored in the program memory The Program Channel No P 2 will appear briefly P will disappear and 2 will revert to 5 i e the first selected program and flash together with PROG to prompt for another
16. ote Control is only for operating the USB and MMC Card functions Point the Remote Control at the SENSOR IR located on the front of the System The functions of the remote buttons are the same as the corresponding controls on the main unit The performance of the infrared SENSOR may be degraded causing unreliable operation if there is a strong ambient light source in the same room The recommended effective distance for remote operation is about 10 15 feet RADIO OPERATION Slide the FUNCTION Selector 12 to the TUNER position Slide the BAND Selector 11 to either AM FM or FM ST FM Stereo Mode Rotate the TUNING CONTROL 10 until you reach the radio station you wish to listen to The radio station frequency shows on the LCD DISPLAY Adjust the sound level by rotating the VOLUME CONTROL 23 To turn off the radio Slide the FUNCTION Selector 12 to the OFF position The LCD DISPLAY will go off oy A FM STEREO RECEPTION With the BAND Selector 11 in the FM ST position the FM Stereo Indicator will light up when listening to a strong station that is broadcasting in Stereo Slide the BAND Selector 11 to the FM position if the FM stereo reception is weak The reception may improve but the sound is now monaural MONO Downloaded from www Manualslib com manuals search engine TIPS FOR BEST RECEPTION AM The AM antenna is located inside the cabinet of the main unit If AM
17. rt a USB flash drive into the USB PORT 22 or an SD MMC Memory Card into the SD MMC Slot 20 located on the front panel 2 Press the RECORD Button 2 REC and USB will begin to flash in the display lf a USB Flash Drive is inserted If an SD MMC Card is inserted then REC and CARD will flash in the display If both USB and SD MMC card are inserted then Icon SEL will also appear and flash in the Display 3 You can use the gt gt I Button or the IK Button to select what media you want to record to 4 Select the track to be encoded and start playing the record 5 Press the Record button to start sync encoding The following will be displayed depending on what media you are using to store the music PHONO ae Rec CLIT cap nn PHO user FTL Encoding to USB Encoding to Card 6 To stop encoding press the STOP USB SD Button 3 Note To ensure the encoding is successful remove the USB or Card a few seconds after pressing the STOP Button 7 To start recording again press the RECORD Button 2 again and follow step 2 above PLEASE NOTE If you want to encode an entire side of a record and have seperate MP3 files for each track you must manually press the STOP USB SD Button 3 at the end of each track and then press the RECORD Button 2 again to start recording the next track If you do not manually Stop and Start the recording process after each track you will end up with one large MP3 file th
18. stalled and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is needed Consult the dealer or an experienced radio TV technician for help WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment PROTECT YOUR FURNITURE This system is equipped with non skid rubber feet to prevent the product from moving when you operate the controls These feet are made from non migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture However certain types of oil based furniture polishes wood preservatives or cleaning sprays may cause the rubber feet to soften and leave marks or a rubber residue on the furniture To prevent any damage to your furniture we strongly recommend that you purchase
19. use PLA DDP o NOTE i Do not stop or turn the platter manually ii Moving or jarring the turntable without securing the Tone arm clamp could result in damage to the Tone arm AUTO STOP SWITCH OPERATION The Auto Stop area on some records may extend beyond the preset setting As a result the turntable could possibly stop before the last track finishes If you experience this during playback set the AUTO STOP Switch 27 to the OFF position The turntable will now run to the end of the record but will no longer stop automatically To stop the turntable you will need to either set the Function Selector 12 to the OFF position or return the AUTO STOP Switch 27 to the ON position After the record stops lift and return the Tone Arm 4 carefully back onto the Tone Arm Clamp 6 Downloaded from www Manualslib com manuals search engine IMPORTANT Moving or jarring the Turntable without securing the Tone Arm Clamp 6 could result in damage to the Tone Arm 4 ENCODING RECORDS TO MP3 You can convert you favorite records into MP3 files and store then on a USB Flash Drive or SD MMC Memory Card via the USB port 22 or SD MMC slot 20 located on the front panel The following tasks can be accomplished by either using the controls on the REMOTE Control or those which have similar function markings on the JTA 460 main unit This icon indicates that a task can only be performed using the controls on JTA 460 1 Inse
20. y from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in anyway such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on apparatus 16 Main plug is used as disconnect device and it should remain readily operable during intended use In order to disconnect the apparatus from the mains completely the mains plug should be disconnected form the mains socket outlet completely 17 Battery shall not be exposed to excessive heat such as sunshine fire or the like CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT AC Outlet AC Plug EN 2 Downloaded from www Manualslib com manuals search engine FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not in
Download Pdf Manuals
Related Search