Protecting Your Screen: Cleaning Your Screen: Limit
Contents
1. Warranty 12 Months Imported and Distributed in Australia by Herma Technologies Factory 4A 6 Albert St Preston VIC 3072 For more information please go to www grandviewscreens com au or call 1300 730 025 Nov 2008 v1 GRANDVIEW Grandview Sky Show User s Manual To the Owner Congratulations on purchasing a Grandview Sky Show designed to produce the sharpest most pleasing pictures with maximum convenience Important Notes e Please read this instruction manual before use e Please do not attempt to adjust or repair the product You will void the warranty e Please retain this instruction manual for future reference e Handle the screen carefully during transportation e To ensure long lasting viewing enjoyment always keep the screen rolled up when not in use Supplied Allen Key Cable Lock RF Remote Operational Instructions Step 1 Carefully unpack the screen Fix the cable box provided mo Screws or bolts Cable box Step 2 Mount the screen as shown below Step 3 Insert the plug Step 5 Using RF Remote Your remote control comes with batteries installed To operate your remote La UP for screen fabric AN j STOP for both Press to lift the screen Sa cote Press to stop the screen AEF Pown for cable Press V to lower the screen Up for cable 4A 7 The Micro switch is used for retracting or lowering cable Cable Limit Settings The lim2. Limit Settings The screen is fitted with 2 limits The limits automatically stop the screen in the fully Up top limit and fully Down bottom limit positions You can adjust the bottom limit to set your viewing height Setting The Bottom Limit Caution Setting the bottom limit beyond the black leader may render your screen inoperable and void your warranty The bottom limit switch is accessible through a grommeted hole on the left side of the casing Lower the screen to the operating position then insert the supplied Hex key into the white coloured screw Turn it clockwise to raise the screen or turn it anti clockwise to lower the screen When lowering the bottom limit the screen will move as you adjust tt When raising the bottom limit please lift and lower the screen with the remote or side buttons to see the new limit setting GRANDVIEW Protecting Your Screen Keep away from direct sunlight or high temperatures Examine both the front and back surfaces before retracting into the case to make sure it is free of dust dirt insects or other foreign matter Use a soft brush or cloth to lightly remove any foreign particles Cleaning Your Screen Do not use any solvents chemicals or abrasive cleaners on the screen surface Use a mild detergent with warm water to remove any marks on the surface or screen case Always immediately dab the screen with a soft cloth to avoid soap marks Do not scrub the surface
3. its are preset at min 300mm and max 4950mm e Turn the remote control over locate the program setting button Press with a fine tip the LED will light up indicating the programming mode e Press the micro switch UP DOWN When button the new cable position is reached press the STOP button e Press the programming button again Now the limit is set Down for cable Please secure your safety limit lug at least 10mm above the new limit Cable cure g positioning piece zib NA
Download Pdf Manuals
Related Search