Home

23151 manual English

1. option 2 Mailing Address Jasco Products Company Attn CIC 10 E Memorial Rd Bldg B Oklahoma City OK 73114 Please contact technical support using one ofthe above options before attempting to ship product returns or warranty requests Failure to do so may delay processing times considerably is a trademark of General Electric Company and is under license by Jasco Products Company LLC 10 E Memorial Road Oklahoma City OK 73114
2. Full Motion Flat Screen TV Mount User Manual 26 55 lbs Max Easy to install mounts in minutes Questions Call 1 800 654 8483 Model 23151 L M F 8 5pm CST or visit www jascoproducts com 8 12 vers1 LISTED Thank you for purchasing this GE product The GE Flat Panel Wall Mount allows you to easily quickly and securely mount your flat screen display to a wall Please review these instructions carefully before beginning installation Please verify the mounting hole locations VESA compatibility of your display to ensure proper installation For further detailed instructions please visit our web site at www jascoproducts com SPECIFICATIONS e Display Size 13 42 e Maximum Load 55 lbs 25 kg e VESA Mounting Pattern 200 mm x 200 mm Max e Tilt Range 13 8 e Pan Swivel Range up to 180 e Horizontal Rotation 360 e Profile 3 1 to 10 8 7 9 cm to 27 4 cm TOOLS REQUIRED e Philips Screw Driver e Pliers e Drill amp Drill Bit 1 8 3mm drywall 5 16 8mm concrete e Wall Stud Locator drywall installation Tools not included WARNINGS 1 Read these instructions carefully before you begin If you are unsure of any part of the process contact a professional contractor or installer for assistance Improper installation can result in injury or damage 2 Use with products heavierthan 25kg 55lbs may result in instability and possible injury 3 The wall or mounting surface
3. eriodically clean your mount with a dry cloth Inspect all screws and hardware at regular intervals to ensure that no connections have become loose over time Re tighten as needed ONE YEAR LIMITED WARRANTY Jasco Products Company warrants this product to be free from manufacturing defects for a period of one year from the original date of consumer purchase This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit This warranty is in lieu of all other warranties express or implied Some states do not allow limitations on how long an implied warranty lasts or permit the exclusion or limitation of incidental or consequential damages so the above limitations may not apply to you This warranty gives you specific rights and you may also have other rights which vary from state to state If unit appears to be defective within the warranty period please contact out technical support team for assistance Technical Support section in the manual www jascoproducts com TECHNICAL SUPPORT For additional assistance Online www jascoproducts com support Email support jascoproducts com Our in house call center is open M F 8 5pm central except holidays and special events For product information troubleshooting and warranty calls 800 654 8483 option 1 For consumer business sales 800 654 8483
4. ill an 5 16 8mm hole at each marked location Remove any excess dust from the holes 4 Insert a concrete anchor B into each hole so that it is flush with the concrete surface see fig 4 A hammer can be used to lightly tap the anchors into place if necessary Note Ifthe concrete wall is covered by a layer of plaster or drywall the concrete anchor mush pass completely through the layer to sit flush with the concrete surface 5 Place the wall plate back FIG 2 against the wall and al attach it using the PP drywall screws A provided inthe hardware gas kit See Fig 2 Do not over tighten these bolts and do not release the wall plate until all bolts are in place Ensure that the wall plate remains level after all bolts are secured ATTACHING THE MOUNT TO THE DISPLAY IMPORTANT Use extra care during this part ofthe installation If possible avoid placing your display facedown as it may damage the viewing surface NOTE This mount comes with a selection of different screw diameters and lengths to accommodate a wide variety of display monitor television models Not allofthe hardware in the kit will be used If you cannot find the appropriate screw size in the kit provided consult the manufacturer of your display for more information 1 Examine the mounting holes on the back of your display A If the mounting holes are spaced 75mm x 75mm or 100mm x 100mm apart skip this sec
5. must be capable of supporting the combined weight of the mount and the display if not the structure must be reinforced 4 Safety gear and proper tools must be used Failure to do so can result in injury and or damage 5 A minimum of two people are required for installation Do not attempt to install this mount alone under any circumstances 6 Follow all instructions and recommendations regarding adequate ventilation and suitable locations for mounting your display Consult the owner s manual for your particular display for more information 7 Seller manufacturer is not liable for damages or injury caused by incorrect mounting assembly or use 8 This product contains small items that could be a choking hazard if swallowed Keep these items away from children This wall mount is for indoor installation only HARDWARE KIT A Drywall screw x3 B Concrete anchor x3 C M4 x 12 screw x4 4 D M4 Locknut x4 E M4 x 12 screw x4 i a F M4 x 20 screw x4 G M6 x 12 screw x4 H M6 x 20 screw x4 M6 washer x4 ae s g gt a 4 7 S J Spacer x4 K S4 Allen key x1 DRYWALL INSTALLATION INSTRUCTIONS MPORTANT For safety reasons this mount must be secured to a wood stud capable of supporting the combined weight of the mount and display DO NOT MOUNT TO DRYWALL ALONE 1 Use a high quality stud finder to locate the stud where you wish to install you
6. r mount Mark both edges of the stud to help identify the exact center NOTE You must use the center ofeach stud to avoid cracking or splitting the wood during installation 2 Place the wall plate against the wall and level it using the integrated bubble level 3 While another person holds the wall plate in position mark three locations for securing the mount to the wall See Fig 1 FIG 1 4 Drill a 1 8 3mm pilot hole at each marked location 5 Place the wall plate back against the wall and attach it using the drywall screws A provided in the hardware kit see Fig 2 Do not over tighten these screws Ensure that the wall plate remains level after all screws are secured FIG 2 CONCRETE INSTALLATION INSTRUCTIONS IMPORTANT For safety reasons the concrete wall must be capable of supporting the combined weight of the mount and the display The seller manufacturer takes no responsibility for the failure caused by walls or insufficient strength MPORTANT If installing the mount into a concrete block or brick surface never drill into the mortar between blocks or bricks YOU MUST SECURE THE MOUNT TO THE CONCRETE BLOCK OR BRICK 1 Place the wall plate against the wall in the desired location and level it using the integrated bubble level 2 While another person holds the wall plate in place mark three evenly spaced locations on the wall for securing the mount see Fig 3 3 Dr
7. tion and proceed with Step 2 B If the mounting holes are spaced 100mm x 200mm or 200mm x 200mm apart you will need to use the adaptor plates included with your mount Attach these to the mount according to the illustration see Fig 5 Use the M4 x 12 screws C and M4 Locking Nuts D from the hardware kit Countersunk Note You must attach the adaptor plates using the four countersunk holes located on the adaptor plates 2 Determine the correct length of screw to use by examining the back of your display A If the back of your display is flat and the mounting holes are flush with the surface you will use the shorter screws from the hardware kit B If the back of your display is curved has a protrusion or if the mounting holes are recessed you will need to use the longer screws and the spacers provided in the hardware kit 3 Determine the correct diameter of screw to use by carefully trying one of each size M4 and M6 from the hardware kit Note Do not force any of the screws if you feel resistance stop immediately and try a smaller diameter screw 4 Attach the mount to the back of your display using the screws identified in Steps 2 and 3 If you are using the longer screws ona display with a curved or recessed back you may also need to use the spacers J provided in the hardware kit Only use a spacer if necessary FINAL ASSEMBLY 1 To complete the installation carefully slide the mo
8. unt with your display attached into the wall plate See Fig 6 Do not release the display until the mount is securely placed in the wall plate If you need to remove the mount from the wall carefully slide the mount upwards and out of the wall plate 2 Tighten the set screw located on the upper front portion of the wall plate using the S4 Allen Key K provided in the hardware kit See Fig 7 Remember to remove the set screw before attempting to remove the mount from the wall plate MPORTANT The set screw should gt 9 be used atalltimesto SP prevent the mount from being accidentally lifted from the wall FIG 7 3 Cables can be routed through the hook located at the bottom of the wall plate to keep them organized and out of the way OPERATION AND ADJUSTMENT 1 To adjust the tilt angle or rotate your screen firmly grasp the sides of you display and carefully move it into position If you find the mount is too difficult to move or is too loose to hold your display in position adjust the three screws located directly behind the head of the mount using the S4 Allen Key provided in the hardware kit See Fig 8 Adjust all three screws evenly 2 Swivel adjustments can be made simply by moving your display to the desired position If any of the swivel joints are too tight or too loose they can be adjusted using the S4 Allen Key provided in the hardware kit See Fig 9 FIG 9 WG P

23151 manual English

Contents

Download Pdf Manuals

Related Search

Related Contents