Operational Safety Guideline Drop Saw
Contents
1. UNCONTROLLED WHEN PRINTED Authorised By Ass Dir Infrastructure Planning amp Compliance UIAS Operational Safety Guideline Drop Saw Issue Date September 2013 Page Number 2 of 2 Last Reviewed September 2013 Next Review Date September 2014 Competent Persons The following persons are authorised to operate the equipment Name Title Contact Details THIS DOCUMENT IS UNCONTROLLED WHEN PRINTED2. Authorised By see Ass Dir Infrastructure Planning UTAS Operational Safety Guideline amp Compliance Drop Saw Issue Date September 2013 Page Number 1 of 2 Last Reviewed September 2013 Next Review Date September 2014 DO NOT use this machine unless you have been trained in its safe use and operation Description of Work Using a Drop Saw Mitre Rip or Crosscut Pm Potential Hazards Exposed moving parts and electrical hazard with the potential to cause harm through entanglement impact and cutting exposure to noise dust projectiles and sharp objects Appropriate Hearing Protective Footwear Protection Clothing 1 PRE Operation Task e g Drawings instructions specifications etc is clearly understood Ensure guarding is in place Ensure the appropriate blade is being used for the task Ensure the local exhaust ventilation system is switched on and in good working order Identify ON OFF switch and emergency stop button if applicable 2 Operation Only use as per directions in User Manual Check that saw runs true and does not wobble Keep hands clear of work piece and away from rotating blade Back out frequently on deep cuts to clean and allow the blade to cool Ensure guarding is in place before saw is re started 3 POST Operation Switch off saw before removing waste material from work area Ensure good housekeeping practices are in place to minimise dust build up THIS DOCUMENT IS
Download Pdf Manuals
Related Search