Home

2.4 inch Color Screen Series User Manual

1. Operation 67 2 4 inch color screen series User Manual USB Disk Curr 1 T Next Prew Upload Ok Back CESC Insert U disk into USB slot of device Press A V to preview the pictures of U disk If you want to upload the picture click OK Then the next picture will appear automatically After upload press ESC to exit _ 68 7 Auto Test 7 Auto Test The device can test various modules automatically to help operator to judge the module with fault quickly Auto test include TFT display Test Audio Test Keyboard Test Sensor Test and RTC Test AUTO Test TFT Test Audio Test RTC Test Press A V to select the item to be selected Press OK to start it 7 1 TFT display test The device can automatically test TFT color display effect through color display white display and black display to see whether the screen works normally Press OK to continue and press ESC to exit 7 2 Audio test The device can automatically test voice prompt effect through playing voice files in the device to see whether the files are complete and the voice effect are good or not 69 2 4 inch color screen series User Manual Press OK to continue and press ESC to exit 7 3 Keyboard test The device can automatically test various keyboards to see whether the keys work normally or not Press any keyboard on the test interface except for OK and ESC to check whether the pressed keybo
2. 10 Appendixes 10 Appendixes 10 1 Keyboard Different device has different kinds of keyboard and the function of the keyboard is different Please check the fallows Keyboard type 1 Numeric 1 0 9 used to input employee number password and so on 2 0 on manage user interface is shortcut of query user l wn 1 Downward l oan current item value 1 Cancel the operation and return to the superior menu 2 Press ESC on initial interface to display the keyboard definition of the present device ENE 2 4 inch color screen series User Manual Keyboard type 2 Numeric 1 0 9 used to input employee number password and so on 2 0 on manage user interface is shortcut of query user 1 Upward 2 Shortcut 1 Downward 2 Shortcut 1 Modify current item value 2 Shortcut 3 Enable T9 input 4 Switch input method in T9 input 1 Modify current item value 2 Space back Press it when User ID password and system value are input incorrectly to delete the wrong value and input the value again 3 Shortcut 1 power off Press it on initial interface for 3 seconds to enter power off count down state 2 Shortcut ESC 1 Cancel the operation and return to the superior menu 2 Close T9 input ho ee 10 Appendixes Keyboard type 3 Numeric 1 0 9 used to input employee number password and so key on 2 0 on manage user interface is shortcut of query user
3. 2 3 2 Enroll fingerprint card 00 0 0 ccccceccceeeeeeeeeeeeeees 27 25 5 Cleat card informah cscs careers 29 2 3 4 Copy card mformaton 29 EE 30 2 4 Access ee deg ek EE 32 D4 ol me Zone EE 33 24 2 Holidays EE 34 24 Group fime EIERE KEEN eege deeg dee 36 2 4 4 Set Unlock Combnaton 38 2 4 5 Access Control Parameters miruna 40 2 4 6 Duress Alarm Barameterg 42 I Contents 2 4 7 Anti passback Setting cccceecesscsscetseesseeneeees 43 2 4 8 RS485 Reader Function W ccccceccecescesseereeens 46 3l Tee E WE 47 3 2 Serial port Option EE 48 By DECULILY n ca tench Sten caCianiach Sten dediamuch Samnsdadiamuch Seees 49 3 4 Wiegand Option W cccccssccesssssssssscsvsesoersasesssssevsncserseses 50 3 4 1 Input configuration ccccccceeeeeeeeeeeesesssesesseeseeees 51 342 Output conferat iach tie tea eae 52 EE E EE 54 ec BEE S eon a aa A 54 4 2 Data mana ce Ment eissernir a E ERE Ei 56 Ao reg 57 AA Display EE 58 A AM EE S a E A E E E A E A 58 EENG 58 AA 3 Picture Cycle Iter E 59 4 4 4 Clock display delay 59 A AS erae E 59 Eeer eege en 60 SE 61 5 Date Mime EE 63 Dal Date Wie EHNEN 63 SE SL EEN 63 6 PenDrive Management 66 GLEN 66 G2 Upload daier aee T E TT Soham OTOES 67 7 Auto Test E 69 LELT OLDA EE 69 E Ee naa a a a elie 69
4. Clear propaganda picture Clear the propaganda pictures uploaded to the device from U disk refer to Upload User Defined Picture in 6 2 Upload data for how to upload the propaganda pictures _ 56 4 System Option Operation riley io ad_2 jog mg Press A V to preview the propaganda pictures in the device Click OK to delete all these pictures After deletion the next picture will appear Click delete all to delete all the propaganda pictures in the device Then press ESC to return to data management interface 4 3 Upgrade firmware Update the firmware by utilizing the USB Pen Drive flash drive Notice If you need such upgrade file please contact technician Usually firmware upgrade is not recommended Operation Insert U disk with upgrade file into the slot The device will identify the file automatically The device will give prompt whether it is successful or not 57 x 2 4 inch color screen series User Manual 4 4 Display Setting Menu Style Back ESC Press A V or to move cursor to the input box Press numeric key on small keyboard to input the number After setting press menu directly to save the setting and return to the last interface Press ESC to cancel setting and return to the last interface 4 4 1 Verification When user is using 1 1 match or password verification he may forget to enroll fingerprint or does not press the finger in the prope
5. BEE tr Es Edit OF Menu M Add holidays Press Menu to get operation menu Press A V to select add SS 2 User Management Mew holidays Press A V to move cursor to the input box Press numeric key on small keyboard to input the value After setting press Menu to save it Then press ESC to exit Edit holidays Select the line to be edited Press OK directly or press Menu to select edit in operating menu Edit holidays Press A V to move cursor to the input box Press numeric key on small keyboard to input the value After setting press Menu to save it Then press ESC to exit Delete holidays Select the line to be deleted Press Menu to select delete in operating menu cee 2 4 inch color screen series User Manual O notice If holiday access control time is set user s open door time zone during holiday subject to the time zone here 2 4 3 Group time zone setting Grouping is to manage employees in groups Employee in groups use group time zone by default Group members can also set user time zone Every group can hold three time zones The new enrolled user belongs to Group 1 by default He can also be allocated to other groups Operation Press Menu gt User management gt Access setting gt Group Time Zone setting Default TZ T001 T2002 T 005 Edit OF Menu He 1 Add group time zone Press Menu to get operating menu Di New yf Edit EN Delete Press A V to select add F
6. no need of using Mifare card Operation 29 2 4 inch color screen series User Manual Copy Card Info Llser Info amp amp FFP Press A V to select only copy user information or copy user information and fingerprint and then press OK Copy card Into E Punch Card 2 3 5 Set card parameter value Set password of Mifare card and decide whether the information should be saved or not Fingerprint card password After the password is set the device will write password into the enrolled fingerprint card Then the fingerprint card can only be used on this device 30 2 User Management Save the information Decide whether to save the enrolled information to the device when enrolling card or fingerprint card No means the information is only saved in the card Yes means the information is saved in both card and device Operation Card Setting card rop BEES EEE ES Ee Ee EEE Must save into Press A Wto move cursor to the item to be set If it is the input box press numeric keys on small keyboard to input the value If it is the roll box press to switch values After setting press menu directly to return to the last interface Press ESC to cancel setting and return to the last interface Notice Card induction area is 3cm 5cm above fingerprint reader mee ee 2 4 inch color screen series User Manual 2 4 Access Control Option Access control
7. 1 Upward 2 Shortcut 1 Downward 2 Shortcut 1 Right 2 Shortcut 1 Left 2 Shortcut r 1 Shutdown In the initial interface press this key for 3 seconds to enter a shutdown countdown status 2 Space back Press it when User ID password and system value are input incorrectly to delete the wrong value and input the value again MENU Menu OK after verification press this key to inquire records O OK Invalid key Access machine do not have this key Sign in state key Sign out state key G Doorbell key Access machine have this key Cancel the operation and return to the superior menu ag be fe 2 4 inch color screen series User Manual 10 2 USB USB Host The device will may be used as USB Host to exchange data with external U disk The data transmission speed is quick the traditional fingerprint machine only supports the RS232 RS485 or Ethernet way data transmission when as a result of physical condition limit data quantity big and the data transmission cost quite long time But the USB data transmission is more quick than the former any transmission mode may complete downloading data by U disk in a short period of time like this greatly enhances the efficiency The operational steps of the device as USB Host please refer to the manual 6 PenDrive management detailed briefing USB Client The device will be as removable storage devices and the data in the device will tra
8. 13 17 29 17 28 oP 17 24 16 58 16 55 16 13 253 15 53 15 28 Record s03 i7 31 17 31 Record 11 17 05 14 57 130 09 30 17 05 14 58 240 09 30 09 40 Record 16 Press A V to move the cursor to the line to be queried And press OK to check attendance record For example the detailed attendance information of employee 10001 on May8th as follows 1 1 1 1 1 1 1 1 1 17717 mn mm OT gt oc oc oc oO GO fo GO GN Total Record 12 F FUI S Check In At the bottom of the screen there are some remark and the capital letters with their meanings Verification F means Fingerprint verification P means Password verification C means ID card verification Status Beef 8 Query Record It is the attendance status The code displayed in the list is the status code And status name will be displayed in the information column ee 2 4 inch color screen series User Manual H System Information Use system information to check the current device s saving status its version information and so on 9 1 Record capacity Display the count of enrolled users administrator password enrollment the current enrolled fingerprint and the current saved attendance record Also display the capacity of the fingerprint and attendance record as show below 9 2 Device information Display device name serial number version information and vendor and manufacture date in device information for check _74
9. 5 Modify users information in the Attendance Management and upload this newly information to the device after connected Then the users newly information will be displayed on the screen upon attendance Some models allow directly name edition and other operation on the device Therefore it is no necessary to connect device Step 6 Verify the device displays the correct day and time Then start to attendance Step7 Download attendance records to the Attendance Management and statistics them at the end of the month 2 4 inch color screen series User Manual 1 2 Introduction to Fingerprint Recognition technology Enroll fingerprint by pressing index finger middle finger or ring finger Proper press Make finger center pressed on the sensor window Improper press Upright Too lean Too downward Please adopt the correct way to place the finger to avoid improper operation led to the identification performance degradation 1 Operating Instruction 1 3 About Verification Mode When the device is on initial mterface only after successful fingerprint or password or Card verification user can save attendance record on the device Initial Interface As shown below Notice 1 If the device have ID module so Interface of Matrix and Magic style can be displayed Press fingerprint or punch card When have not ID module it can be displayed Please Press fingerprint only 2 The dev
10. Card Info Copy Card Into Lard setting Back LESC Press A to select your desired item press OK to execute the current selected item 2 3 1 Enroll card Regard Mifare card as ID card use just register card number do not need to enroll the fingerprint Operation 1 Enrollment Step 1 Select enroll card and then press OK s95 2 4 inch color screen series User Manual Enroll ID Card T Input OK contirm Step 2 press keyboard to input the number to be enrolled Cif the number has been there already the device will prompt you to copy the information to the card and then press OK Enroll ID Card Step 3 The device prompts to show card Step 4 Put the card in the induction area until the operation is successful 2 Verification Sway the card in the induction area After the device inducts the card move the card off When the verification is successful the device will give prompt rips Please enter user access control option to modify the 96 2 User Management verification mode as RF or verification won t be successful 2 3 2 Enroll fingerprint card Enroll fingerprint and write fingerprint into card Operation 1 Enrollment Step 1 Select enroll fingerprint card and press OK Enroll FP Card a Input OK contirm Step 2 Use keyboard to input the number to be enrolled Cif the number has been there already the device will prompt you to copy the information to
11. Contents TiS Keyboard TSU scsi constr cok ners cee et nei cet Got nei cee ced ete 70 EE Eeer 70 KYRIE CIOE kungsi ENER 70 EO R AEE EE 71 EE IM OrMmavlon a A TO 74 a Ee EE 74 Reie ee rers hed E 74 LOMA Tel 75 LOT Keyboard ett 75 OZ Ee ere eebe e 78 10 3 Quick query of attendance record 78 10 4 Propaganda picture upload rules ccc cccccceeeeeeeeeeees 79 10 5 Card support ID EM MIFARE Card zk 80 10 6 Web time amp attendance W ooo ccc ccccccccscceseceseceseeeseesseeeses 81 LOTO DILO OM eN riana 82 10 9 Daylight Saving Time W eeeeerereerererrereren 82 10 10 Master slave function kA 83 10 11 About the human rights privacy statement 85 10 12 Environmental protection ccccccccccccccccceeceeeeeeeeeeeeeees 86 Il 1 Operating Instruction 1 Operating Instruction 1 1 Abbreviated Operating Procedures Step 1 Install the device and power it up Step 2 Enroll users by registering his her fingerprints passwords or card Assign users security privileges directly on the device Step 3 After enrolling users verify that his her enrolled fingerprint passwords or card is valid Step 4 Configure the device communication settings Then download the users newly enrolled information from the device onto the Attendance Management on the computer Data can be transmitted via TCP IP RS232 RS485 and USB client or by using a USB flash drive Step
12. Select whether to display the fingerprint image on the screen when it is enrolling or verifying there are 4 options display upon both enrollment and verification only display upon enrollment only display upon verification not display upon enrollment and verification Lock power off To prevent hostile power off select whether to lock power off or not Disable the power is off 3 seconds after pressing power off Enable it is ineffective after pressing power off Language To choose the display language Master Slave Select whether to establish master slave connection or not Push Select whether to use the PUSH function or not ay oe 5 Date Time 5 Date Time 5 1 Date Time option Accurate attendance time is based on accurate time date Enter time date to set options Operation DateTime mo 0 E Time 10 b 53 i 0 E Time Format ich E par Enter DLST Gel H Dal D dat H FE H Standard aa H E D im H ESI H Press A V to move cursor to the input box Press numeric key on small keyboard to input the value After setting press menu directly to save the setting and return to the last interface Press ESC to cancel setting and return to the last interface 5 2 DLST DLST also called Daylight Saving Time is a system to prescribe local time in order to save energy The unified time adopted during the system date is called DLST Usually the time will be one hour forward in summer It c
13. a master unit Select Y if you want to Slave unit Whether set this device to be a slave unit Select Y if you want to Master Server IP Input the master server IP manually if you set this device as a slave unit Sync Each hour The synchronization frequency after the connection Pi ee 2 4 inch color screen series User Manual You can set every few hours to synchronize With range of 0 99 only the device is set as master unit this setting is valid Master Slave Upt Master Server IP MER Dees ft bo Gun Each Hour 60 0 99 Slave Unit P x 2 Connection Choose the master unit and slave unit Connect them to the LAN through the switch Restart the devices after connection The master unit is an ordinary fingerprint device After the device restarted slave unit will automatically search the master unit and send a request If the message Fail to sync shown on the slave unit it means the slave unit can t found the master unit and the data update is failed Please check the settings through the device menu If there is no prompt in the client which means the connection is successful The process in the master unit is same to the ordinary fingerprint device The data in the master unit will be synchronized to the slave units according to the parameters set in master slave option 84 10 Appendixes 10 11 About the human rights privacy statement Dear customer First th
14. as illegal access Only user s last record is in record can the door be open when he she want out Otherwise it will trigger the alarm signal as illegal access E None anti passback Slave machine can verify to open the door and the prompt no enrolled data on the master machine Anti passback function is available Machine status Press lt to move cursor to the item to be set If select Control Out the master control out the other machine control entry Need two machines cooperation 45 2 4 inch color screen series User Manual 2 4 8 RS485 Reader Function Equipment supports RS485 reader function can be through the RS485 communication connected reader meanwhile it can act as Master slaver which device for master reader for slaver achieve RS485 Anti passback functions Note If select to supports 485reader function so device can not with PC through 485 communications 485 Purple Power Black Access Control Device Reader _ 46 2 User Management 3 Communication Option When the device and PC are used to transmit data it is necessary to use communication wire to set communication parameters in the device 99 When the device is in communication communicating appears Don t operate the device then O notice When the device is communicating with computer please check the setting here The parameters here must be in accordance with that of software communicat
15. color screen series User Manual Notice 1 means this employee is the administrator means password has been enrolled means ID Card has been enrolled 2 The picture may be different from your device The real product prevails Press menu on the above interface and the operating menu will pop out a i Search User CS CTER KA Edit Seil User Ze New User Press A V to select the item 2 2 1 Search user If many users are enrolled in order to find an employee quickly the 20 2 User Management device has provided User ID to search the employee Press menu on manage user interface to get operating menu Select Search u user or press any numeric key to enter the ee EES ID NU Back ESC A Input User ID of employee to be queried Press OK after successful query the blue cursor will point to the employee If there is no such employee no enrolled data will appear 2 2 2 Query attendance record When administrator is checking employee s fingerprint and other enrolled information he can also check the employee s attendance record during that month Press menu on manage user interface to get the operating menu select record and the employee s monthly attendance record can be checked 21 2 4 inch color screen series User Manual Record ID NO 1 Name Zeo S LZ 09 54 10 Le i a ii A ed be Notice The picture may be different from
16. digits Operation E Security al DevicelD 1 254 Password E Max 6 d Lg it OK EMS lt 3 Back ESC 3 4 Wiegand option Define Wiegand input amp output format _ 50 2 User Management Back ESC 3 4 1 Input configuration User defined format User defined Wiegand input format Bit digit Wiegand data digit length Pulse width Pulse width is 100 microseconds by default which can be adjusted from 20 to 800 Pulse interval It is 900 microseconds by default which can adjusted between 200 and 20000 Input content Content contained in Wiegand input signal including User ID or card number Operation Input Opt Define Bit Counts x Pulse Width us Default Pulse Inter lt 1 O00 us Input ID NO Back ESC 51 2 4 inch color screen series User Manual Input the name of user defined format Press A V to move cursor to the item to be set If it is the input box press numeric keys on small keyboard to input the value If it is the roll box press lt to switch values After setting press Menu directly to return to the last interface Press ESC to cancel setting and return to the last interface 3 4 2 Output configuration Format It is the defined format in the system User need not specify total digit and the information position There are 4 definition formats by default in the system Wiegand 26 with site code Wiegand26 with site code means W26 format ou
17. option is to set user s open door time zone control lock and related device s parameters If the device support external facial instrument it can not support the camera and advanced access control at the same time To unlock the enrolled user must accord with the following conditions 1 The current unlock time should be in the effective time of user time zone or group zone 2 The group where user is must be in access control or in the same access control with other group to open the door together The system default the new enrolled user as the first group default group time zone as 1 access control as the first group and the new enrolled user is in unlock if user has modified the related setting of access control the system will be changed with user s modification Operation Press Menu gt User Management gt Access Setting as shown below Holidays Setting Group Time Setting Untock Combination geting Accees Control parameters Duress alarm parameters Anti Passback Setting Press A V to select your desired item press OK to execute the current selected item SE 2 User Management 2 4 1 Time Zone Setting Time zone is the minimum unit of access control option The whole system can define 50 time zones Every time zone defines seven time sections namely a week Every time section is the effective time zone within 24 hours everyday Every user can set 3 time zones or exists among th
18. the device 1 afew or nobody keep watch Thought TCP IP and Ethernet WEB Server is able to reliable apply to local network the data fingerprint machine store up can be watch and deal via long distance network with browser it is not need to administrator or person specially assigned go to local for to achieve task collect data upload and download data as well as upgrade system not have other software and tools 8 2 4 inch color screen series User Manual 2 Fully compatible with our company Inc program WEB Server platform may be fully compatible with current program each other entirely is mutually beneficial ability to much more flexible to meet customer need 3 More reliable fast through long distance transfer data Through WEBSERVER the data is able to reliable and fast be download local system utilize browse ability to down all data in short time do not worry about the reliability of data 4 More flexible easy for data management and source share Via the platform created by Web server the application program data management becomes more easy and flexible 5 May easy integrate OA CRM system reliable base on network human force management 10 7 9 Digit Codex When go on enrolling user in the fingerprint machine along with the standard enrolling code is five digit Cits range is 1 65534 if you need that the enrolling code is longer in the actual application we can provide a customized design that the f
19. the manager status is confirmed after the success can entry the menu For example the following is the flow for add user Input User ID 1 Allocate User ID by default 2 Press z to delete the allocated User ID by default Input User ID from keyboard If the User ID is wrong press to input it again Input namex Use T9 input to input employee s name Press OK or A F to select enroll fingerprint then press OK to start fingerprint Enroll fingerprint Enroll FP 3 0 Quality Press Finger Press finger according to device s prompt Press the finger three times in the proper way If one fingerprint is enrolled successfully press OK to continue another finger then press menu and ESC to return the last interface Press A V to select enroll password and press OK to enroll password Enroll password SE 2 4 inch color screen series User Manual Oe nee Back ESC Input password 1 8 according to device s prompt and press OK to verify it Then press OK save it or press ESC to exit without saving it After saving d i display will be on the device which means the password has been set Enroll card Scroll A Wkeys to locate the cursor on enroll card button and press OK to enter the registration card Enroll Card 3 Punch Card Slight ware the card near the induction area after the equipment found the card number press OK key to save pre
20. use RS232 to communicate Select ON if RS232 is to be used _ 48 2 User Management RS485 Whether use RS485 to communicate Select ON if RS485 is to be used USB Whether use USB to communicate Select ON if USB is to be used RS232 RS485 and USB cannot be used at the same time Operation RS252 485 BaudRate BPS RS232 OFF OFF Back LESC Press A Wto move cursor to the item to be set Press lt to switch values After setting press Menu directly to return to the last interface Press ESC to cancel setting and return to the last interface Notice 1 Only some models have RS232 RS485 USB communications 2 The picture may be different from your device The real product prevails 3 3 Security When RS232 RS485 is used for communication of device and PC it is necessary to set device ID Device ID 1 254 If RS232 RS485 is used this ID needs to be input on the software communication interface To improve the security of attendance data connection password needs _ 49 2 4 inch color screen series User Manual to be set here Connection password must be input when PC software is to connect device to read data Connection Password System password is 0 by default namely there is no password it can be set as other value After setting the password must be input if software is to communicate with device Or the connection will fail The password length is 1 6
21. your device The real product prevails Press A V to read attendance record Press OK menu to query detailed information 1 1 1 1 1 1 1 1 1 Thee SL A HGH H Ty coo FCF a Aa A A OG CN Total Record sl3 DrbUD Ge Chbheck Ipn Then press ESC to return to manage user interface 2 2 3 Edit user Edit user information saved in the device For example the former enrolled fingerprints are unusable enter edit user to re enroll fingerprint password or card s92 2 User Management Use A V or query user on manage user interface to select employee to be edited Then press menu to select edit or press shortcut to verify it and all enrolled information can be SE on the device ID NO 2 Name FP Sa FP Num 4 PHD Change PHO Card Enroll Card Purview U ser E r Back ESC Notice Only some models have name and card options User ID cannot be modified The operation is similar to that of add user Fingerprint can be re enrolled Click enroll password directly to set password or modify password The access can also be modified Save edition exit edition Press menu or A F to select complete press OK save edition and return to manage user interface Press ESC or A V to select return ESC and then press OK and the device will prompt data has been changed Are you sure to save If you want to save it press OK and return to the l
22. 2 4 inch Color Screen Series User Manual Version 1 3 Date June 15 2013 Introduction This document mainly introduces interface and operation of 2 4 Inches color products About this manual l Se e Means optional functions not all devices have this function There is a slight difference between the photo and the real product The later prevails Key functions of various models are different Please read the key board instruction in appendix firstly Due to the constant renewal of products the company can not undertake the actual product in consistence with the information in the document also any dispute caused by the difference between the actual technical parameters and the information in this document Please forgive any change without notice All rights Reserved Contents Contents 1 Operating Instruction cece ccccscceeesscesecssceseceseesecesecsseeseceseeeseeseeeseenees l 1 1 Abbreviated Operating Procedures ccccccccceccecceeeeeeeeeees 1 2 Introduction to Fingerprint Recognition technology 2 E A DOU kee 3 kee 11 re EE 13 2 User Maaso eN anena rasan eaaan aed ci aid ea ueanunema cls tea canaees 15 Die MPA MIS CU ee ee ee 15 EE 19 E E AA O ee hacen A A E Mare ones 20 2 2 2 Query attendance record 2 DoD GUS Cl EA EE E aes E E A tenes uastoeataas 22 Dit NCCLS US eege eege eege 23 PRIA E 24 2 Card mana emne N EE 25 2 REENE EE 25
23. 4 System Option Set system parameters to meet user s demand as many as possible b Data Mng Update Display 4 1 System parameters 1 1 matching threshold value The similarity of ID fingerprint verification and the enrolled template 1 N matching threshold value The similarity of verification and the enrolled template Recommended matching threshold value Matching threshold value FRR FAR 1 N 1 1 high low 45 25 middle middle 35 15 low high 25 10 54 4 System Option Time format Time format displayed on initial interface Press lt gt to set 24H or 12H Date format Press lt P to select format The fingerprint sensor supports ten date format YY MM DD YY MM DD YY MM DD MM DD YY MM DD YY MM DD YY DD MM YY DD MM YY DD MM YY and YYYYMMDD Select your desired date format Press lt P to set 24H or 12H Keyboard voice Press Ak to set whether the key has voice or not Yes means having voice and No means no voice Voice prompt Press lt to select whether to give voice prompt or not The device will give corresponding voice prompt during Operation Volume Press Ak to set it Attendance record alarm when the free space reaches the set value the device will give alarm automatically effective value is 0 99 0 means the space is all used and there is no alarm Repeat verification time it is in the set time range Cunit Minute If somebody s attendance record has been there then the re
24. Device control electronic lock is in enabling time effective value 1 10 seconds Door sensor delay After the door is open delay the time to check door sensor If door sensor state is different from the normal state of door sensor mode alarm will be given off This time is called door sensor delay effective value 1 99 seconds Door sensor mode It includes NONE NC and NO NONE means there is no door sensor NO means the door is open normally NC means the _ 40 2 User Management door is closed normally Door sensor alarm When abnormal door sensor state is detected alarm will be given off after some time This time is door sensor alarm effective value 1 99 seconds Alarm count When the failed press times reach the set times alarm signal will come out effective value 1 9 times NC time zone Set time zone for access control NC Nobody can unlock during this time zone NO time zone Set time zone for access control NO The lock is always in enabling state during this time zone Whether holiday is effective Define time zone for NO or NC Whether the time zone set in time zone is effective O notice 1 when time zone is set for NO or NC please set door sensor mode as None or alarm signal may come out during time zone of NO or NC 2 If time zone of NO or NC has no definition the device will prompt it and add the definition in time zone setting Operation Press Menu gt User Management gt Acce
25. an make people sleep early and get up early It can also reduce lighting to save power In autumn the time will be recovered Sh te 2 4 inch color screen series User Manual The regulations are different in different countries At present nearly 110 countries adopt DLST To meet the demand of DLST a special option can be customized on our RF Card Time amp Attendance recorder Make the time one hour forward at XX minute XX hour XX day XX month and make the time backward to the standard time at XX minute XX hour XX day XX month if necessary Operation _ E 1 Time ie H 53 fl 04 E Time Format T DLST tu Enter DLST H D H M Standard H D H H 1 Set DLST as ON 2 Input DLST start time and end time For example if 08 00 April 1 is set the device enter DLST and the time will be one hour forward If it is 08 00 August IT the device will reset normal time 64 5 Date Time Em IER E D K DLST oN Enter DLST H D 8 H og H Standard H dr EI oke 3 Press WE OK to save setting Press ESC to exit without saving _ 65 2 4 inch color screen series User Manual 6 PenDrive Management Import user information fingerprint template attendance data and so on in the device to attendance software or import user information and fingerprint to other devices through U disk Pentr ive Upload Rack ESC 6 1 Do
26. ank you for using Multi biometric identification product we design and produce As one of the global famous fingerprint identification core technology provider we are constantly carrying on the development and research also we believe such action is necessary to a comply with the law or legal process served on Our company b protect and defend the rights or property of Our company including the enforcement of our agreements or c be governed by related law or legal that involve to the human rights and the privacy in each country We are committed to protecting your privacy We state as follows l Our civil fingerprints identification equipment merely captures fingerprint features point but not the fingerprint image does not involve and retain privacy 2 The fingerprint features points are not to be recovered the primitive fingerprint image will not involve the privacy 3 We took an equipment provider in no event shall we are liable for any direct or the indirect against legal behavior arising out of use or inability use our equipment 4 If you have the different dispute for close the human rights or the privacy arising out of using our equipment please directly contacts with your employer Our other the police fingerprint equipment or the development kit provide with the function that ability to capture citizen s fingerprint primitive image as for whether will constitute the right infringement to you please contact with the lo
27. ard is in accordance with that displayed on the screen will appear whether it is the right key and D will appear whether it is not the right key Press ESC to exit 7 4 Sensor test The device will automatically test the sensor to see whether it works normally Press fingerprint to see whether the image is clear and usable Press fingerprint on the sensor window and the fingerprint image will appear on the screen Press ESC to exit 7 5 Real time clock The device can automatically test the clock to see whether it works normally Press OK to start time and then press OK to stop time Press ESC to exit SEHR 8 Query Record 8 Query Record Employee s attendance records will be saved in the device For convenience query record function is provided According to user s input query condition the record will be displayed on the screen for user to check Notice The picture may be different from your device The real product prevails Enter query attendance input corresponding information in the query condition input box a e DA O start Mont Day pE Hour End Hont Day 72 Hour DEI Back ESC When the User ID is blank all employees are inquired When input a User ID only this employee s attendance record can be queried After query the records in accordance with the conditions will be displayed on the screen SE 2 4 inch color screen series User Manual Total FRecord
28. arm signal Alarm delay After duress alarm gets started the alarm signal is not output directly But it can be defined After some time alarm signal will be generated automatically 0 255 seconds Operation Press Menu gt User Management gt Access Setting gt Duress alarm parameters as shown below SAD 2 User Management Duress alarm parameter 1 1 Trig 1M Trig Pwo Trig Alarm Delay Press A Wto move cursor to the item to be set If it is the input box press numeric keys on small keyboard to input the value If it is the roll box press to switch values After setting press Menu directly to return to the last interface Press ESC to cancel setting and return to the last interface 2 4 7 Anti passback Setting overview Sometimes some illegal person follows the employee into the gate which will bring security problem To prevent such risk this function 1s enabled In record must match out record or the gate won t be open This function needs two machines to work together One is installed inside the door master machine hereinafter the other is installed outside the door slave machine hereinafter Same Wigand signal communication 1s adopted between the two machines Same user and user ID number enrolled _ 43 2 4 inch color screen series User Manual IN master machine slave machine user SEL pg Operation Press Menu gt User Management gt Acce
29. ast menu Or press ESC to return the last menu 2 2 4 Delete user Del user is to delete employee s partial information or all information from the device It is used when the following states happen oe e 2 4 inch color screen series User Manual 1 When employee s fingerprint or password is not needed any more 2 When employee leaves the position Press A V on manage user interface or use query user to select the employee to be edited Click menu to get operating menu and then select delete user Delete user Del User ID ND 2 Mame MikKe Delete Fingerprint Delete Password Back Esc Notice Only some models have Del ID Card Only options If the user has no fingerprint or password the corresponding item 1s blue and cannot be operated Press A V to select the item to be operated Press OK to pop out dialog box and verify whether to delete this item or not Then the device will give corresponding prompt Press ESC to return to manage user page 2 2 5 Add user In order to add user conveniently for operator add user is configured here The function is the same as that of 2 1 add user 24 2 User Management 2 3 Card management Support Mifare non touch intelligent card with working frequency of 13 56MHZ Integrate fingerprint attendance to other systems and support multi verification mode to meet the demands of different people Operation Enroll FR Card Erase
30. ating menu 2 4 4 Set Unlock Combination Make various groups into different access controls to achieve multi verification and improve security An access control can be made up of 5 groups at most Operation Press Menu gt User management gt Access Setting gt Unlock Combination setting _ 38 2 User Management ome 0l 02 00 Edit 0E Menu MA 1 Add unlock combination Press Menu to get operating menu Press A V to select add For example to add an unlocking combination this needs the verification of both group 1 and 2 as shown below Add unlock comb Comb LP GP2 GEZ GP3 GP4 Member a SR SS Press A V to move cursor to the input box Press numeric key on small keyboard to input value After setting press Menu to save it Then press ESC to exit _ 39 2 4 inch color screen series User Manual 2 Edit unlock combination Select the line to be edited Press OK directly or press Menu to select edit in operating menu Unlock Comb Comb 1 SP 4 GP2 SES GP3 GPA Member ae ET SS Press A V to move cursor to the input box Press numeric key on small keyboard to input value After setting press Menu to save it Then press ESC to exit 3 Delete unlock combination Select the line to be deleted Press Menu to select Delete in operating menu 2 4 5 Access Control Parameters Set device control locks and related device parameters Lock driver time length
31. ation at the door the LCD graphical display will assist the user with instructions about finger placement on the biometric sensor For more detail see ID EM Mifare Card user Guide 80 10 Appendixes 10 6 Web time amp attendance Summary The T amp A system is based on Web Server technical use Page Request technical to process and manage data it integrate many feature such local data collection intellectualized port RS232 RS485 communication protocol conversion image collection alarm data stored up and WEB server etc basing on this equipment to create an unifying monitoring platform that supply one solution for equipment management Time amp Attendance as well as monitor in addition the Web Time amp Attendance solution is independent on regional limit and do not need to install other software utilize IE or Netscape browser downloading and remote on line management handle time sheet corrections and create report table on the fingerprint terminal is available it supply easy way for manager of enterprise know the employ in post or attendance state at any moment in time search for information statistic data deal with operation at same time provide a solution of staff attendance check in or out management pay roll management in word and deed realize that at everywhere any moment the information is synchronization its go far beyond traditional Time amp Attendance solution Why does embedded Web Server into
32. cal government or the equipment final provider as the equipment original producer we have e 2 4 inch color screen series User Manual not any legal liability for any damage it cause Note There are limited rights to privacy and human rights in the Chinese Constitution The personal dignity of citizens of the People s Republic of China is inviolable and further that insult libel false accusation or false incrimination directed against citizens by any means is prohibited the protection of freedom of the person and the residence The Constitution provides for the freedom and privacy of correspondence of the citizen Finally we hereby stressed that once again as one kind of advanced identification technology the fingerprint identification will apply to electronic commerce bank insurance law service industry in the future every year all world cause from the lack of security password the humanity are suffering the heavy loss In under high safe and secure environment the fingerprint identification protect your status from damage in fact 10 12 Environmental protection m The environmental protection use period marked on our products is the safety period of our products used under the conditions specified by this manual without toxic and harmful substances leaking happened WR The environmental protection use period marked on our products does not include the easy wear and tear components required to be replaced regularly s
33. cord of second attendance won t be saved effective value is 0 60 minutes 0 means all the records after verification are saved Operation Setting Threshold 1 1 1 N Date Fmt gt gt Keybeep ON Sensitivity 4 Vol ON P vol K 4 Semele Finger VX10 0 im ReCheck Min io OK M lt Log Alert on Back ESC Press A V to move cursor to the input box Press numeric key on small 55 2 4 inch color screen series User Manual keyboard to input the value If it is the input box press numeric keys on small keyboard to input the value If it is the roll box press lt gt to switch values After setting press OK or menu directly to save the setting and return to the last interface Press ESC to cancel setting and return to the last interface 4 2 Data management Delete attendance record Delete all attendance records Delete all data Delete all enrolled employees information fingerprint and attendance record Clear management access Change all administrators into common users Operation Press System Menu Data Mng as below Delete All Clear Purview Delete Picture Press A V to move cursor to the selected button Press OK or menu to start operation The device will remind you whether to continue the current operation or not Then press OK or menu to delete all the data which won t be recovered after deletion Press ESC to return to the last interface
34. e three zones It is effective if only one is satisfied Every time section format is HH MN HH MN namely accurate to minute If end time is smaller than start time 23 57 23 56 the whole day is forbidden If end time is bigger than start time 00 00 23 59 it is effective section Effective time zone for user unlocking 00 00 23 59 or the time zone when end time is bigger than start time Notice System default time zone as whole day open namely the new enrolled user is unlocking Operation Press Menu gt User Management gt Access Setting gt Time Zone Setting shown as below Time one Setting Tz OS ae oun oo foo Mar Mord oof op IER oc Hoo THU oo Boo Do Hoo E a Input time zone number If the enrolled time zone has number already KE E PER Se 2 4 inch color screen series User Manual then the time zone setting will displayed automatically Press A V lt gt to move the cursor to the input box press numeric key on small keyboard to input value Then press Menu to save it and press ESC to exit 2 4 2 Holidays Setting Special access control time may need during holiday It is difficult to modify everybody s access control time So a holiday access control time as access control exceptions can be set which is applicable for all employees Operation Press Menu gt User Management gt Access Setting gt Holidays Setting as shown below Ho x Dates GEE
35. er 30K or it cannot be uploaded 79 2 4 inch color screen series User Manual The picture s resolution is 320 wide and 240 high It is better not to be more or less than it The propaganda pictures count should be 10 at most If you want it please contact our businessman or technician 10 5 Card support ODEM MIFARE Card In order to meet security market need our fingerprint biometric verification reader can be embedded EM MIFARE reader module ID EM Card The FRT supports ID cards with working frequency of 125KHz and card reading distance of 2m to 5m Mifare Card The FRT supports MIFARE non contact smart cards with working frequency of 13 56 MHz and card reading distance of 3m to 5m Using 125MHZ 13 56 MHz non contact smart card technology these fingerprint products provide users with new options for supporting multi authentication of identity Combine a non contact card presentation with a fingerprint biometric Or use a personal identification number PIN number along with a non contact card presentation See multi authentication The fingerprint products provide three levels of fingerprint verification During the enrollment process the LCD prompt will guide the user to place their finger on the sensor The fingerprint template is collected at the unit and immediately transferred to the card During this enrollment process the fingerprint template is stored on the card or the fingerprint machine During verific
36. fied 10 1 Operating Instruction Step 3 Ifthe card has not registered yet prompt that card 1s not registered 1 4 Connection with PC The device only records attendance time The statement can be disposed by software on PC Therefore it is necessary for device to connect PC to download attendance record to attendance software The following is some connection methods Ethernet 1 Through hub Use parallel net cable to connect network card and hub to connect device into the network 2 Direct connection use cross net cable connect two Ethernet terminals directly to connect device and PC Set device Enter Menu Communication option Network to set the following items IP address Default IP as 192 168 1 201 You can modify it if it is necessary sil 2 4 inch color screen series User Manual Subnet mask Default subnet mask as 255 255 255 0 You can modify it if it is necessary Gateway address Default gateway address0 0 0 0 You can modify it if it is necessary Network speed There are three options ATUO 10M and 100M Connection password Set it in Menu Communication option Security It can be set or not If it is set input corresponding numerical value on connection interface of PC software RS232 Use RS232 serial port wire for connection Set device Enter Menu Communication option to set the following options Baud rate Set it in RS232 485 Communication s
37. ice has three interface styles for option Each style displayed different contents on the screen For details please refer to 4 4 Display Setting 3 As above the Name of screen you can edit different names can be executed by Access Control Management Software 2 4 inch color screen series User Manual Fingerprint Matching 1 1 N fingerprint matching Verify the fingerprint pressed on the sensor at present with all fingerprint data in the fingerprint reader Step 1 Press fingerprint properly on the sensor on initial interface TA Step 2 If device says Thank you the verification is completed ID NO 4 Hame verified If device says Please press again and displayed Verify fail on the screen a 1 Operating Instruction Return Step 1 for the second operation Verity fail 2 1 1 fingerprint match User ID fingerprint Verify the fingerprint pressed on the sensor at present with the fingerprint related with user number Use this method when it 1s difficult to identify user s fingerprint Step 1 Input User ID of employee to be verified on initial interface ID Miz 1 2 4 inch color screen series User Manual Step 2 Press fingerprint properly on the sensor ID MO 1 Step 3 If device says Thank you the verification is completed ID NO j Name Verified Notice OIf device says Please press again return Step 2 for the second operati
38. ingerprint machine own nine digit code 10 9 Daylight Saving Timex Some device provides correct and current time in any world time period country or major city Accurate adjustments for Daylight Saving Time or Summer Time are made according to each location s rules and laws No matter what time period a country or city 1s located in this is your top choice for a clock resource site BR ae 10 Appendixes This function can be set in the fingerprint machine option Press Manu key enter the Date Time In the XX Month XX Date XX minute move forward an hour and that in the XX Month XX Date XX Minute move Back an hour The operation refers to this manual 5 2 DLST 10 10 Master slave function Overview In order to reduce the repeated enrollment operation in multiple devices we can use the master slave option It only needs to enroll user information in one master device other slave units will send synchronization requests to the master according to set master slave parameters The master unit sends its all user information and fingerprint template data to slave units when it has checked a synchronization request on the network Slave units receive and save the data from master So the user enrolled in the master unit may record attendance in multiple slave units Operation 1 Menu setup Enter Menu Communication option Master slave option there are four relevant options Master unit Whether set this device to be
39. ion interface A Wiegand 3 1 Network option When Ethernet is used for communication of device and PC the following settings need to be checked Device IP address IP is 192 168 1 201 by default You can modify it if it is necessary But it cannot be the same with that of PC Subnet mask It is 255 255 255 0 by default You can modify it if it is _47 2 4 inch color screen series User Manual necessary Gateway address It is 0 0 0 0 by default If the device and PC are in different net segment it is necessary to set address Net speed Set the speed according to the LAN where the device 1s Operation NerNork IF Address 132 bo fio bo subnet mask 255 25s f25s fo GateWay o fp bp bp NetSpeed V tegt Back Esc Press A Wto move cursor to the item to be set If it is the input box press numeric keys on small keyboard to input the value If it is the roll box press gt to switch values After setting press Menu directly to return to the last interface Press ESC to cancel setting and return to the last interface 3 2 Serial port option When serial port RS232 RS485 is used for communication of device and PC the following settings need to be checked Baud rate Used for communication with PC There are five options 9600 19200 38400 57600 and 115200 If the communication speed is high RS232 1s recommended If the communication speed is low RS 485 is recommended RS232 Whether
40. nsfer to a PC via connected USB cable When the device is an USB Client the Communication Option will have USB communication options For more details please refer to the manual 3 Communication Option 10 3 Quick query of attendance record It is used for common user to query his intraday attendance record to see whether there is something wrong for attendance time and notify administrator the abnormal recorder in time Operations Press M to display the employee s intraday records after successful _78 10 Appendixes fingerprint or password verification in 10 minutes For example the employee with User ID of 1 can check his intraday attendance record by pressing MH after fingerprint verification Date Record TD NO t Hame zeo 0317 11 02 10 24 10 23 10 14 10 14 10 12 09 54 09 36 09 34 09 44 09 34 09 44 Detailer ADK Notice The picture may be different from your device The real product prevails Press A V to read attendance record Press WT to query detailed information Press ESC to return to initial interface 10 4 Propaganda picture upload rules The picture format must be JPG Other formats are not accepted here The file name of propaganda picture must be ad 0 ad_9 for example ad 1 Jpg The file name won t be changed after it is uploaded to the device If it is necessary to change this picture upload another picture with the same file name to cover it Every picture cannot be ov
41. on 1 Operating Instruction ID NO 1 Mame Please try again If device says Error ID that means you input ID number is wrong please return Step for the second operation ID NO d Error JD Mo Password Matching Step 1 Input User ID of employee to be verified on initial interface Then press OK Step 2 If it says that the enroll number is wrong it means that there is no such number or the employee does not enroll password Se 2 4 inch color screen series User Manual ID NO 4 Step3 Input password when the interface appears ID NO 4 PAD Step 4 If device says Thank you the verification is completed 1 Operating Instruction ID NO 4 Name When the screen displayed password error and Input password again as shown below ID NO 4 PHO Password error 2 4 inch color screen series User Manual ID NU 4 PHO Input password again Please return Step 3 input password again for the second operation Ranges of the input password time is 0 9 Employee can set default time what you want For details please refer to 4 4 Display Setting Card Matching The card area is round the keyboard Step 1 Wave the card near the induction area on initial interface after the induction equipment finding the card please remove the card Step 2 When the equipment gives the tip Thank you the certification completed ID NO 4 Name Veri
42. or example to add a group whose time zone is 2 and 3 as shown below TH 2 User Management Mew group Moa VerType Hoildays ES Tz3 Eng Notice 1 If holiday is effective only when there is intersection between group zone and holiday time zone can the group member open the door 2 If holiday is ineffective the access control time of group member won t be affected by holiday Press A Wto move cursor to the item to be set If it is the input box press numeric keys on small keyboard to input the value If it is the roll box press gt to switch values After setting press Menu directly to return to the last interface Press ESC to cancel setting and return to the last interface 2 Edit Group time zone In the Access Group setting interface select the line to be edited Press OK directly or press Menu to select edit in operating menu Bei 2 4 inch color screen series User Manual Edit group Mo SN verType Holidays TZ OK CHA Hack ESC Press A Wto move cursor to the item to be set If it is the input box press numeric keys on small keyboard to input the value If it is the roll box press to switch values After setting press Menu directly to return to the last interface Press ESC to cancel setting and return to the last interface 3 Delete group time zone In the Access Group setting interface select the line to be deleted Press Menu to select delete in oper
43. peed rate with computer if the communication speed is high RS232 115200 57600 is recommended RS232 Set it in RS232 485 Select Yes for RS232 Communication password Set it in Security It can be set or not set If it is set input corresponding numerical value on connection interface of PC software RS485 set device Enter Menu Communication option to set the following options Device ID Set it in Security It can be set from 1 254 Baud rate Set it in RS232 485 Communication speed rate with computer if the communication speed is low and stable RS 485 9600 38400 is recommended RS485 Set it in RS232 485 Select Yes for RS485 Communication password Set it in Security It can be set or not If it er er 1 Operating Instruction is set input corresponding numerical value on connection interface of PC software USB Set device Enter Menu Communication option to set the following items Device ID Set it in Security It can be set from 1 254 USB Set it in RS232 485 Select Yes for USB communication Communication password Set it in Security It can be set or not If it is set input corresponding numerical value on connection interface of PC software 1 5 Main menu On the initial interface press the Menu key about 3 seconds to open the Main Menu as shown in the following figure D PenDrive CH Auto Tes
44. r way For user s convenience and to reduce repeat key the device allows retry 4 4 2 Time display There are two clock modes for Select After verification the selected clock mode will be displayed on the screen 58 4 System Option 4 4 3 Picture cycle interval Picture cycle interval means how soon will the picture be changed Ceffective value is 3 999 seconds Display propaganda picture User can display some propaganda pictures on the screen The operation refers to this manual 10 4 Propaganda picture upload rules 4 4 4 Clock display delay Time display delay means the clock picture display time length after verification After the display delay the propaganda picture will be displayed on initial interface again with effective value of 0 999 seconds and 0 means displaying clock all along 4 4 5 Interface style User can set initialize interface s style Press menu System Display Initialize style There are three modes common matrix default magic If change _ 59 2 4 inch color screen series User Manual interface success machine displayed Standby Interface modified success Notice 4 4 3 Picture cycle interval and 4 4 4 Clock display delay functions are fit use common Then you should restart the device mode of interface style only When you select matrix or magic mode these functions are invalid Display screen show the BON matrix or magic style all
45. ss Setting gt Access Control Parameters Access Control Parameter Lock KEE Be At DSen Delay 1 997s Den Mode Alarm Delay 1 9995 larm Court E ore SE Close Is Open TA Valid holidays ORK iM 3 Back ESC oct 2 4 inch color screen series User Manual Press A Wto move cursor to the item to be set If it is the input box press numeric keys on small keyboard to input the value If it is the roll box press P to switch values After setting press Menu directly to return to the last interface Press ESC to cancel setting and return to the last interface 2 4 6 Duress Alarm Parameters There is duress alarm parameter setting in the device When employee come across duress select duress alarm mode the device will open the door as usual But the alarm signal will be sent to the alarm Help key If select Yes press help then press fingerprint in the following 3 seconds or press ID number and duress alarm will come out after successful identification If select No it is useless to press help Chelp can be set in keyboard definition 1 1 Trig if select Yes when user use 1 1 match mode alarm signal will come out Or there is no alarm signal 1 N Trig if select Yes when user use 1 N match mode alarm signal will come out Or there is no alarm signal Pwd Trig If select Yes when user use password verification mode alarm signal will come out Or there is no al
46. ss Setting gt Anti Passback setting as shown below Anti Passback Setting APB Dire dl Lacal 1da5Req OKM Back ESC The choice of Machine models Press A V to switch the input box Press M gt to modify the setting Select Anti Out refer to out anti pass back only user s last record is in record the door can be open Otherwise it will trigger the alarm signal as illegal access Select None refer to no anti pass back and no alarm will be triggered After _44 2 User Management setting press Menu directly to return to the last interface Press ESC to cancel setting and return to the last interface Anti passback Function The master machine control OUT and the slave machine control IN E In anti passback APB In Only user s last record is out record can the door be opened Otherwise it will trigger the alarm signal as illegal access Enter New user s first time access will pass In anti passback mode not restrict of OUT WR Out anti passback APB Out Only user s last record is in record the door can be opened Otherwise it will trigger the alarm signal as illegal access Out New user s first time access will pass In anti passback mode not restrict of IN E I n Out anti passback APB Out In New user s first time access will pass Only user s last record is out record can the door be open when he she want IN Otherwise it will trigger the alarm signal
47. ss to give up then remove the card from the equipment after the Enroll successfully the card number will display on the register button Privilege setting BECH 2 User Management Scroll the A V key and local cursor on the Privilege option box scroll lt gt key to choose privilege Save exit user registration To confirm the registration information is correct after getting confirmation save it The way for saving 1 Scroll A Wkey to locate cursor on the completes it button please press OK key again the prompt the data has been changed Are you sure to save it on the equipment press OK the key to save it if you do not want saving press ESC to exit If the prompt Save successfully Continues to input appear on equipment want continuing to press OK if you abandon this operation press ESC key 2 Press the ESC key or scroll A Wkey to locate the cursor on the return ESC button please press OK key again the prompt the data has been changed Are you sure to save it appear on equipment press OK key to save and return to the preceding of menus does not serve and return to the preceding of menus press ESC key 2 2 Manage user All users information saved in the current device can be queried in manage user including user name fingerprint count whether to enroll password or card user attendance record and so on Editing or deleting user can also be done here 19 2 4 inch
48. t User management Browse the users basic information like ID name fingerprint card password and privilege and so on Increase edit or delete operation the basic information Set the work code for user and card management SR 2 4 inch color screen series User Manual Communication Set up communication parameters between the equipment and the PC including IP address gateway subnet mask baud rate device number communications password etc System Manage the data and set the system parameters including basic parameters interface parameters fingerprint and attendance parameters to maximize meet user s needs in the functional display and other areas Date Time Device time date should set accurate to ensure the accurate attendance time PenDrive By USB the user info and attendance data etc can be imported to the accordingly software to deal or import the user information for other fingerprint devices to use Auto Test automatically test the function of each module if it is workable including the screen sensor voice keyboard and clock tests Record For query the record saved in the device convenience query record function is provided Sys Info Use system information to check the current device s saving status its version information and so on ER EA 2 User Management 2 User Management The user s basic information on the device includes fingerprint password and management access In compan
49. the Common Style Matrix Style Magic Style 4 5 Reset Make device s communication option system option and so on reset to the state of factory Factory reset Make all the parameters in the device reset to the state of factory Reset keyboard definition Reset the corresponding setting of 60 4 System Option keyboard definition to that of factory Reset bell option Only reset bell option to factory state Reset other parameters only reset communication option system parameter and interface option and so on to factory state Reset keyboard Settings Reset Bell Settings AN Press A V to move cursor to the button to be operated Press OK to start operation The device will say Are you sure to execute the current operation Press OK to reset it to factory state and press ESC to cancel operation Notice The employee s information and attendance data won t be deleted when this operation is being done 4 6 Other options Set sleep time external bell and other parameters for the device Scheduled sleep When it is the scheduled sleep time the device not in operation will enter sleep status Press any key or finger to awake it External bell whether to enable external bell It is the bell ring given off from external electronic bell connected with the internal of the device instead of the device speaker ae 2 4 inch color screen series User Manual Fingerprint image display
50. the card and then press OK The device will prompt you to move off your finger 297 x 2 4 inch color screen series User Manual Enroll FP Card PIN 6 Enroll FFP C Geo 3 L i Input OkK confirm Step 3 Press finger properly three times Step 4 Device prompts please show card Enroll FP Card a Punch Card Step 5 Put the card in the induction area waiting for the device to read fingerprint data into card until the enrollment succeeds 2 Verification Sway the card in the induction area After the device inducts the card move the card off When the verification is successful the device will give prompt If the pressed fingerprint is different from that stored in the card the verification will fail 28 2 User Management 2 3 3 Clear card information Delete all the information in the card being operated at present Operation Erase Card Info T Punch Card Put the card in the induction area waiting for device to delete all the information in the card If the card data has been stored in the device the device will remind you whether to delete the information in the device or not Yes is to delete the user s fingerprint and information in the device No is to keep the information 2 3 4 Copy card information Copy card information to the device after copy the fingerprint is still in the card then press fingerprint attendance directly on the device with
51. tput with device ID If there is no site code then the signal not to be output does not contain the information If there is site code the output is the set site code similar to device ID But this code is specified by the user and different devices can be repeated with range of 0 255 Failed ID It is the failed ID after unsuccessful verification Close means not to output it With range of 0 65534 Site code Similar to device ID But the code is specified by user Different device can be repeated With range of 0 255 Pulse width Pulse width is 100 microseconds by default which can be adjusted from 20 to 800 Pulse interval It is 900 microseconds by default which can adjusted between 200 and 20000 Output content Content contained in Wiegand output signal choose User ID or card number Operation a Oe 2 User Management Format Faild ID Site Code Pulse Inter Hds us Default Output ID NO Input the name of user defined format Press A Wto move cursor to the item to be set If it is the input box press numeric keys on small keyboard to input the value If it is the roll box press lt to switch values For example to modify failed ID as 10 press firstly to select Yes then input 10 in the input box After setting press Menu directly to return to the last interface Press ESC to cancel setting and return to the last interface 53 2 4 inch color screen series User Manual
52. uch as the battery etc The battery s environmental protection use period is 5 years Toxic and harmful substances or element names and the content table 86 10 Appendixes ae toxic and harmful substances or ay Part name 2 ca cor PBB PBDE ee T SMD SMD diode components Indicate that the content of the toxic and harmful substance Buzzer contained in all homogeneous materials of this part is in the limitation requirement stipulated in SJ T 11363 2006 x Indicate the content of the toxic and harmful substance contained in at least one homogeneous material of this part is beyond the limitation requirement stipulated in SJ T 11363 2006 Note The 80 product has adopted the manufacture with non toxic and harmless environmental protection materials the non toxic and harmless substances or elements instead of the toxic and harmful substances or elements contained can not be achieved because of the current technology and economic constraints LOT
53. wnload data 1 Download attendance data Save all attendance data in the device to U disk Operation 1 Insert U disk into USB slot of the device through mini USB 2 Press A V to Download Record Press OK for verification Downloading data please wait 99 will appear on the display when the device is downloading attendance data until it is successfully downloaded 3 Press ESC to return to initializing interface Pull out U disk X_attlog dat attendance log will be saved in U disk X stands for 66 lt 6 PenDrive Management device ID 2 Download user data Save all users information and fingerprint in the device to U disk Operation Insert USB flash disk into USB slot of the device press A V to download user then user dat user information and template dat fingerprint template will be saved in U disk 6 2 Upload data 1 Upload user data Upload user information and fingerprint saved in U disk to device Operation Insert U disk into USB slot of fingerprint sensor Press A V to select upload user data then press OK and user dat Cuser information and template dat fingerprint template in U disk will be uploaded to the device If there are no such files data copy error will appear 2 Upload user defined picture Upload JPG picture started with ad_ in U disk to the device Then this picture will be displayed on initial interface Refer to appendix 10 4
54. y s attendance management for employee s change the information on the device also needs modification Therefore operations including add delete check modify and so on can be done on the device 2 1 Add user Firstly enroll employee s fingerprint or password in the device Enter New User interface BS C 2 4 inch color screen series User Manual FP Num 0 Card Purvieuw 4 P none Back ESC Notice Only some models have name and card options ID NO Staffs attendance number FP Fingerprint enroll employee s fingerprint Ten fingerprints can be enrolled at most The employee with fingerprint enrolled can use fingerprint to record attendance PWD Enroll password enroll user s password The effective digit is 1 8 The employee with password enrolled can use password to record attendance Card Registered staff s Card only the registered card is possible to check attendance Purview Users are people whose identity must be authenticated before enter a menu The ordinary consumer can track attendance by the card or the password only the manager already may equally carry on the daily checking attendance with the ordinary consumer but may enter the menu to operate each option Notice When there is no appointed the manager any person all may entry the menu operation after the manager is appointed anyone 2G 2 User Management is unable to entry the menu until

2.4 inch Color Screen Series User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents