multiband travel clock with indoor-thermometer
Contents
1. LOCK SWITCH Slide the LOCK switch to the direction shown on the unit the lock symbol will appear on the display meaning that all of the unit s operation keys are locked PRECAUTIONS This product is engineered to give you years of satisfactory service if handled carefully Here are a few precautions Do not immerse the unit in water Do not clean the unit with abrasive or corrosive materials They may scratch the plastic parts and corrode the electronic circuits Do not subject the product to excessive force shock dust temperature or humidity which may result in malfunctions shorter lifespan damaged batteries and damaged parts Do not tamper with the unit s internal components Doing so will invalidate the warranty and may cause damage The unit contains no user serviceable parts Use only fresh batteries Read the user s manual thoroughly before operating the unit 14 SPECIFICATIONS Calendar and Clock Auto and manual selection of frequency bands for major countries US UK EUR SWISS JPE JPW Daylight Savings Time DST control 12 24 hour display in HH MM SS format User selectable date format month day or day month Dual 2 minute crescendo alarm with 5 minutes snooze 23 World Time Zones control Enhanced Orange Backlight duration 5 seconds Keyboard lock Indoor Temperature Mesure range 5 C to 50 C 23 F to 122 F Temperature resolution 0 1 C 0 2 F User selectabl2. IROX MULTIBAND TRAVEL CLOCK WITH INDOOR THERMOMETER TRAXEL X USER S MANUAL TABLE OF CONTENTS INTRODUCTION PRODUCT OVERVIEW ALL SEGMENTS DISPLAY OVERVIEW GETTING STARTED BATTERY INSTALLATION ATOMIC TIME RECEPTION CALENDAR AND CLOCK DISPLAY MODES MANUAL SETTINGS TIME ZONE DST Daylight Savings Time MODE RF RECEPTION MODE RADIO SIGNAL RECEPTION ICON INTERFERENCE ALARMS SNOOZE LIGHT INDOOR TEMPERATURE LOCK KEY SWITCH PRECAUTIONS SPECIFICATIONS O N N NNUU oe 10 10 11 12 12 13 13 14 14 15 IROX RC305EL MANUAL English SIZE W65 X H105 mm BY EMILY TSOI 15 05 06 INTRODUCTION Thank you for selecting the TRAVEL X International Travel Clock This device includes precise time keeping temperature monitoring and other neat features that you can use from the comfort of your home or on the road while traveling The travel clock is capable of setting its time and date to the precise radio controlled time in any of the three world regions North America Europe and Japan In this package you will find e One Multi Band Atomic Time Travel Clock e One Travel Pouch e One User Manual Please keep this manual handy as you use your new item It contains practical step by step instructions as well as technical specifications and precautions you should know PRODUCT OVERVIEW FEATURES Precise time and date set via RF signals from any of three different world s reg
3. may occur at any time after pressing and holding the UP button until the reception icon appears ii INTERFERENCE The radio signal reception can be affected by a number of different factors from surrounding building materials to the weather conditions For the optimum reception please consider that During the night time hours atmospheric disturbances are typically less severe and radio signal reception may improve A single daily reception is sufficient enough to keep the clock accuracy within second Make sure the unit is positioned at least 8 feet 2 meters away from any interfering source such as a TV computer monitor microwave etc Within concrete wall rooms such as basements or office buildings the received signal may be weakened Always place the Clock near the window for better reception ALARMS The International Travel Clock has two alarms Weekly ftw and Single 5 If either of the alarms is activated it will sound at the set time and the alarm icon will flash Mondays through Fridays SETTING THE ALARM To set any alarm Press the ALARM button to select the ALARM mode The E Oo G default setting is the Weekly m MEL z Alarm If the Weekly Alarm is off A 1a the icon wu along with OFF will be displayed Press the UP button to select 7 00 entering into the alarm E time setting mode Press and hold the ALARM button for two seconds The hour digit wi
4. G UP BUTTON Increases all function parameters Selects the date display format date month or month date Activates Single or Weekly Alarm in ALARM mode H DOWN BUTTON Decreases all function parameters Sets the language for the day of the week Activates the radio controlled time receiver Enables or disables any of the alarms I LOCK SWITCH Locks all operation buttons while traveling preventing the battery drain J SNOOZE LIGHT BUTTON Activates snooze function and EL backlight ALL SEGMENTS DISPLAY OVERVIEW h TT a i k ht r bone E TAA m NN LN CB EB AUTO USA UR EUR SWISS JPE JP w a Time with seconds b Date in month date or date month format c Indoor temperature in C or F d RF reception type icon e Single Alarm icon f Weekly Alarm icon g Key lock indicator h RF reception strength indicator i Low battery indicator icon GETTING STARTED BATTERY INSTALLATION Open the battery compartment door Install one CR2032 3V button battery matching the polarity as shown in the battery compartment Replace the battery compartment door ATOMIC TIME RECEPTION Immediately after the battery installation the clock will beep once and display all available segments Then the unit s receiver will start to automatically scan for any available radio controlled time signal If the synchronization is successful the relevant world region will
5. N SEL Once the SEL Single Country Band reception is selected the aad abbreviation SEL will flash Ai G4 UK EUR SWISS JPE JPW with AUTO and all countries abbreviations underlined Press UP or DOWN selecting the desired single reception band WWVB 60 US MSF 60 UK DCF 77 5 EUR HBG 75 SWISS JJY40 JPE or JJY60 JPW Once the desired band is selected press the MODE button to confirm The relevant country abbreviation will be underlined and will remain on the display MANUAL ACTIVATION OF THE RADIO CONTROLLED TIME SIGNAL SEARCH Press and hold the UP button in any mode the unit will beep once and the reception bars will appear above the reception icon DISABLING THE ATOMIC RADIO CONTROLLED TIME SIGNAL SEARCH Press and hold the DOWN button in any display mode the unit will beep once and the reception bars will disappear from the left corner leaving just a dot reception icon RADIO SIGNAL RECEPTION ICON Once the reception mode is activated the radio reception icon will start flashing The wave above the dot icon shows the radio signal reception strength The strength of the reception is shown in the range from zero weakest to six strongest bars Once the reception mode is activated the International Travel Clock will search for the atomic time signal for about 15 minutes An auto activation takes place twice a day at 1 05AM and 3 05AM the manual activation
6. be underlined and stay visible on the display Once the atomic time signal is received the date and time will be set automatically and the icon appear above the second digits on the upper right corner of the display If the time signal has not been received in 15 minutes refer to the directions for setting the time and date manually CALENDAR AND CLOCK DISPLAY MODES The International Travel Clock has four different display modes which may be accessed by pressing the MODE button TIME mode HOUR MINUTES SECONDS TIME ZONE SETTING mode DST Daylight Savings Time RF RECEPTION mode MANUAL SETTINGS If you choose to disable the atomic time signal reception please follow the steps below to set the clock manually TIME Select the TIME Hour Minutes Seconds display mode by pressing the MODE button Press and hold the MODE button for 3 seconds until M month and D date begin to flash Press UP or DOWN to select the desired calendar format MM DD or DD MM After the calendar format is selected press the MODE button to move to the next parameter The PM abbreviation will flash in the top left corner right under the DST icon Press UP or DOWN gt to select 12 or 24 hour time format Press the MODE button to enter into the day of the week selection ne ag mode the abbreviation EN i ic rw Es Ge will flash on the lower right corner of the displa
7. e F or C temperature display Power 1 CR2032 size 3V battery included Battery life 1 year Dimensions 3 78 L x 2 08 H x 0 24 D inches
8. ions North America Europe and Japan Ability to receive the atomic time signal from WWVB DCF MSF HBG JJY40 and JJY60 frequency bands Auto scan of the radio controlled time frequency bands Major country band pre set Calendar displaying date with month User selectable calendar format Indoor Temperature display in Celsius or Fahrenheit User selectable 12 or 24 hour time format Day of the week display in English German French Italian Spanish or Dutch Dual crescendo alarm with snooze Daylight Savings Time manual adjustment Enhanced Backlight Low Battery Indicator Keyboard interlock Folded travel size or opened for desktop view FRONT VIEW A MULTI BAND RADIO CONTROLLED TIME CLOCK WITH INDOOR TEMPERATURE ie D 4 T1 0 cs A Ls J Hale ut B MULTIBAND ALARM B ALARM BUTTON Allows toggling between CLOCK and ALARM display modes Enables or disables WEEKLY or SINGLE alarm 4 REAR VIEW C MODE BUTTON Allows toggling between different display modes TIME DST SETUP TIME ZONE ADJUSTMENT RECEPTION MODE SELECTION D C F BUTTON Selects the Indoor temperature display format in Celsius or Fahrenheit E BATTERY COMPARTMENT Accommodates one 1 CR2032 button battery F UNFOLDING TABLE STAND SUPPORT Keeps the unit in an upright position on a flat surface TOP VIEW
9. ll flash Adjust the hour by pressing the DOWN or UP buttons Press and hold or buttons for faster digits adjustment Press the ALARM button to confirm the Alarm time Press the DOWN button to activate the Alarm an icon fb will appear on the display above the alarm time with the word ON below the alarm time Repeat the same procedure to set a Single Alarm selecting it by pressing the UP button If the Single Alarm is off the default alarm time 8 00 OFF with tS will be displayed DISABLING THE ALARM Press the ALARM button to enter into the desired ALARM mode Press the DOWN button to disable the selected alarm The icon W or S will disappear from the unit s display SNOOZE LIGHT When the alarm sounds press the SNOOZE LIGHT button to temporarily stop the alarm and activate the backlight for 5 seconds After the SNOOZE LIGHT button is depressed the alarm sound will resume in five 5 minutes NOTE If the battery power is low the backlight cannot be activated So the battery needs replacement INDOOR TEMPERATURE The indoor temperature shares the same display s line with time The temperature reading is updated every minute NOTE If the indoor temperature goes above or below the operating range stated in the specifications the display will show HH or LL respectively Press the C F button to select the temperature in Celsius or Fahrenheit
10. ortunity to adjust the clock s time to Daylight Savings automatically manually or turn off this feature completely the Daylight Savings Time DST 44 api mode The mode r oed Z W Sl ibg correctly if the abbreviation DST is displayed on the top left corner of the display and the word Auto is on the top right one Press and hold the MODE button until the DST and Auto will flash Press UP or DOWN buttons selecting the setting for Daylight Savings Time ON OFF or Auto After the desired setting is selected press the MODE button to confirm the selection Press the MODE button to select E If the ON or AUTO is selected the clock will automatically synchronize with the Daylight Savings Time in spring and fall If Daylight Savings Time does not apply to your geographic area an OFF setting has to be selected RF RECEPTION MODE RECEPTION MODE SELECTION You can choose between the auto scan single band reception and RF reception OFF modes Enter the RF RECEPTION mode by pressing the MODE button until the abbreviation SEL is displayed Press and hold the MODE button for 2 seconds the reception icon will start to flash along with the line above AUTO Press UP to select the auto scan AUTO single band SEL or reception OFF OFF Press MODE to confirm the selected reception type 10 SINGLE COUNTRY RF BAND RECEPTIO
11. y Press UP or DOWN to select the language for day of the week English German French Italian Spanish or Dutch Press MODE button to enter into the programming mode of the time display format the seconds digits will flash Press UP or DOWN to adjust seconds minutes hour year month and day Press the MODE button for the last time to confirm the settings after the last parameter is set TIME ZONE PROGRAMMING THE TIME ZONE Select the Time Zone display E ST ONE mode by pressing the MODE button ZONE abbreviation will be displayed on the lower left corner next to DST and 8h Press and hold the MODE button until 8h flashes Use the UP or DOWN buttons to change the TIME ZONE hour in 12 hour range Example If the atomic time received from the Atomic Clock located in Japan JJY60 is 3 00pm Japan time and the TIME ZONE is set to 8 hours Hong Kong Time Zone then the local time display will be 2 00pm If ON or AUTO is selected the clock will automatically synchronize with the Daylight Savings Time in spring and fall If Daylight Savings Time does not apply to your geographic area an OFF setting has to be selected Press the MODE button to confirm the settings and return to the default LOCAL TIME display DST Daylight Savings Time MODE Daylight Savings Time mode control gives the opp
Download Pdf Manuals
Related Search