Home

Brochure

1. ELEKTA 11 KEEP mixer away from hot gas burner electric hot plate or similar appliances 12 This appliance is strictly for household use 13 Do not drop the main unit or jars 14 Never use accessories or parts not recommended by ELEKTA or those made by other manufacturers else the warranty will become invalid 15 Do not use the jars as storage containers 16 Do not leave unit unattended while in operation 17 It is not advisable to run the mixer continuously for more than 30 minutes 1 How to fit the blades Hold the coupler on the underside of the jar and with the spanner tighten by rotating in anti clockwise direction till the blade is securely locked Repeat procedure for the other jars 2 How to fit jar to base unit After fitting the blades carefully insert jar on top of the base unit Ensure that lock of the jar fits the slot of the base unit Rotate the jar clockwise until it locks 1 Before the first use thoroughly clean parts that come in contact with food 2 Preparation for use Cool the hot ingredients before putting in jar Cut large ingredients into small pieces of approx 2cm before processing a amp ELEKTA Check speed selector knob is at Off Connect mains plug to wall socket after fixing jar Switch on main supply Turn speed selector to required position and speed After operation turn selector knob to Off and check Repeat til
2. E K ELEKTA www elektaindia com ELEKTA EMG 1560IN Mixer Grinder Please read the guidelines provided in this User Manual on Important Instructions Appliance Usage amp Warranty before using the product Introduction ELEKTA brings to you a range of mixer grinder with high quality steel jars Introduction 2 Please note accessories for your model EMG 1560IN wet dry and chutney jar General description eTa tI descri ption and technical specifications 2 1 Base unit the motor speed switch mains cord and overload protector Important instructions 3 4 switch 2 Speed selector knob for different speed adjustment 4 5 3 Overload Protection Switch 7 4 Anti slip rubber feet 5 1 5 litre Wet grinding jar for liquidizing and blending 6 1 0 litre Dry grinding jar for dry grinding 7 0 4 litre Chutney grinding jar for small quantity grinding such as Using the product How to fit the blades How to fit jar to base unit Operation 9 chutney pepper dry masala Before the first use 8 Wet grinding blade detachable Preparation for use 9 Dry grinding blade detachable 10 Chutney grinding blade detachable Cleaning and maintenance 6 11 Spatula to clean sides of jars from inside and use as a spanner for blades Overload protection 6 Technical specifications m Model No EMG 1560IN Maximum jar capacities 6 Voltage 220 240V 50 60Hz Wattage 600W max Trouble shooting 7 8 Reco
3. ection with spatula Switch off appliance and let it cool for 60 minutes Use correct jar as per the application Refer table on page 6 for the maximum capacity of jars Cut ingredients into appropriate size Inch 5 7 times to powder ingredients Add water as required and grind on speed 3 Unplug appliance Remove jar from base unit Remove lid to check if gasket has been assembled correctly In case these measures do not work contact the nearest Elekta Service Center or call at Toll free Number 18002702929 ELEKTA Recommended blades Stainless steel wet grinding blade Best for wet grinding applications likes Tomato onion paste Vegetable fruit puree Rice and dal batter Stainless steel dry grinding blade Best for dry grinding applications likes Dry masalas Rice and dal powder For maximum jar capacity turn to page 6 amp ELEKTA Stainless steel chutney grinding blade non removable f Best for making Chutneys and Pastas in small quantities Lesser quantities of masalas Warranty and service For any information or problem contact your local ELEKTA dealer or authorized service center For a list of authorized ELEKTA service centers visit www elektaindia com or contact our Toll Free Number 18002702929 or mail us to customercareindia elektagf com Warranty card A b This apparatus is covered under warranty against any defect due to defective material or workmanshi
4. l desired results are obtained For blending liquidizing pureeing use pulse on speed knob This will activate the whipping till you release the button High Cleaning and maintenance 1 Remove main plug from wall socket Do not immerse base unit in water 2 Wipe base unit with a damp cloth and non abrasive liquid cleaner 3 Disassemble other parts after use Wash them in soapy water rinse with clean water and dry thoroughly Do not wash in a dishwasher Cleaning is easiest done immediately after use 4 Take soapy water in jar and assemble it on base unit Pulse 5 6 times and wash the jar 5 Store mixer grinder standing on its heel in a safe and dry place Mixer is fitted with an automatic power shut off mechanism to avoid motor burning due to overloading If mixer stops due to overloading the red knob at the bottom will come out Switch off the mixer Remove excess load from jar wait for 2 3 minutes Press red button and start mixer again Wet grinding jar Dry grinding jar Chutney grinding jar ELEKTA Overload protection Press this Maximum jar capacities Wet capacity rated Max Dry capacity rated Max 3L 0 Appliance does not work Appliance suddenly stops working while in use Base unit gives an unpleasant smell during first few times of use ELEKTA The appliance is equipped with an Over Load Protector OLP switch If app
5. liance overheats it automatically cuts off power supply The quantity being processed is probably too large This is normal for the first few times No electricity supply Ensure that the plug is plugged well Unplug appliance and let it cool for 2 3 minutes Remove jar from base unit At the bottom of base unit there is a red coloured switch OLP Reset OLP by pressing it Put plug back into wall socket and switch on appliance again see heading Overload Protection Switch off appliance Remove ingredients that are blocking the blade unit Refer table on page 6 for the maximum capacity of Jars If appliance continues to smell after using a few times Ensure that jars are clean and there are no ingredients stuck inside it Ensure that appliance has been assembled correctly 7 Appliance makes a lot of noise There are fumes from the appliance Unsatisfactory grinding blending mixing performance Leakage from jar lid Jar lid has not been properly placed Jars have not been properly locked Blade is loose Appliance may have been used for too long Incorrect jar selection Ingredients overloading in jar Large size of Ingredients Chutney not grinding well Gasket has not been fit properly Make sure lid has been properly and tightly locked Make sure jar has been properly and tightly locked Remove ingredient from jar and tighten the blade in anti clockwise dir
6. mmended blades 9 Warranty and service 10 Warranty card 10 red coloured switch located below the base of the unit ELEKTA ELEKTA We recommend that you read the following instructions carefully before using the appliance 1 Check if the voltage indicated on the base of the appliance corresponds to the local electrical mains voltage before connecting the appliance 2 Do not use the appliance when the mains cord the plug or other components are damaged Only the company or a service centre authorized by ELEKTAmust replace it i 3 Always unplug the appliance after a ELEKTA 4 Never immerse the motor unit water n 5 Always unplug the appliance before reaching into the jar with your fingers or an object e g spatula 6 The appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance 7 Always ensure that speed selector knob is at Off before fixing accessories High 8 Do not operate the mixer without the lid in place or with an empty jar 9 Handle the blades carefully wash them under running water and do not rub by hand 10 Do not use mixer on wet surface
7. p or TWO YEARS from the date of purchase Should a defect develop during the period of warranty ELEKTA undertakes to repair the apparatus FREE OF CHARGE through the dealer from whom it has been purchased or at any of the ELEKTA authorized Service Centres The warranty is not valid in case Apparatus is not used according to user manual Defects caused by improper or reckless use Repairs done by persons other than ELEKTA Authorized service centre Modifications of any nature made in the apparatus Tampered serial number Incomplete warranty card after purchase Product if used for commercial purpose i e other than domestic use Usage of parts not recommended by ELEKTA or those made by other manufacturers CON DOO FP WN gt All consumables and parts susceptible to normal wear and tear are not covered under warranty Week S No Date of purchase Dealer s name Dealer s stamp Customer s name and address Model No Dealer s signature ELEKTA 10

Brochure

Contents

Download Pdf Manuals

Related Search

Related Contents