CLEVERAUDIO 1050035 user manual
Contents
1. Active speaker volume control panel CONNECTIONS PASSIVE SPEAKER 1 Bare wire connectors are provided on the passive speaker to enable the passive speaker to be connected up to 10 meters away from the amplifier by cutting the speaker cable to the length required Sahara Presentation Systems Plc Williams House Hailey Road Erith Kent DA18 4AA INSTALLATION GUIDE 1 2 3 Screw the two speaker brackets to each of the speakers Pre drilled holes are provided Select a suitable position for each speaker at either side of the interactive whiteboard Fix wall mounting screw into a suitable wall plug position at the wall that the speaker can be hung on this screw using the central keyhole wall mount Hang the speaker unit on this fixing and mark a holeposition on the wall for the speaker s top security bracket Drill and install a suitable wall plug for the top security bracket Hang the speakers using the central keyhole wall mount and secure the speaker to the wall with the screws provided into the top wall plug position Connect the 10m speaker cable provided into the active speaker using the RCA connector in the base of the active speaker Measure and cut the end of the cable to the length required to join the passive speaker to the amplifier Strip off 7mm of insulation from the cut end and insert into the speaker connections on the passive speaker Connect the audio cables with the RCA connectors into2. WARNINGS CAUTION To reduce the risk of electric shock do not remove cover or back panel There are no user serviceable parts inside Please refer servicing to qualified service personnel Power supply 230 volt 50 Hz SAFETY INSTRUCTIONS e The product shall be connected to a power supply only of the type described e To reduce the risk of fire or electric shock do not expose this product to rain or moisture e Unplug the product from the wall socket when the speaker is not being used e Adequate care shall be taken so that foreign objects do not fall or liquids are not spilled into the enclosure through openings e Do not remove the cover or back as there are no user serviceable parts inside CONTENTS 1 1x Active Speaker 2 1x Passive Speaker 3 4x Wall security brackets and screws 4 1x 10 meter speaker cable to connect the Active to the Passive speaker 5 1x Audio input cables with RCA to 3 5 Mini Jack plug 6 1x Audio input cable with RCA to RCA connectors 7 1x Euro power lead 8 1x UK Euro adapter 9 1x User Guide Sahara Presentation Systems Plc Williams House Hailey Road Erith Kent DA18 4AA DESCRIPTION AND FUNCTIONS This wall mounted speaker system is suitable for mounting either side of an Interactive whiteboard in a classroom environment Key Features e 30 Watt Amplifier with two audio inputs e The system has secure wall fixings and steel mesh grille as added protection in the classroom e Inputs ar
3. RoHS Waste Electrical and Electronic Equipment WEEE Directive 2002 96 EC REACH compliant Sahara Presentation Systems Plc Williams House Hailey Road Erith Kent DA18 4AA MODEL NO 1050035
4. USER GUIDE KR AUDIO ACTIVE WALL SPEAKERS ai 1050035 MODEL NO ACTIVE WALL SPEAKERS Thank you for buying this product We are confident it will provide you with a long reliable service but just in case you experience a problem it is supplied with a 1 year return to base warranty This warranty and the product to which it relates applies to the original purchaser only and its not transferable for the avoidance of doubt this will be taken from the information held by the appointed national distributor at the point of sale The liability of the manufacturer and its appointed service company is limited to the cost of repair and or replacement of the faulty unit under warranty This warranty protects you against the following e Failure of any components e Damage when the product is first removed from its packaging if reported within 24 hours of purchase If you find you do have a problem with this product you should contact the AV reseller you purchased this product from The original purchaser is responsible for shipment of the product to the manufacturer s appointed service company for repair The manufacturer endeavours to replace the faulty parts of the product rather than replacing the whole unit This warranty does not protect this product against faults caused by abuse misuse incorrect installation unstable or faulty power input which might be caused by ignoring the guidelines set out in this guide
5. e included for PC and DVD or VCR e The system is supplied with all cables and speaker connections e Full ROHS REACH compliance and CE approval Basic features e The wall mounted speaker system is supplied with wall fixing brackets and screws plus cables needed to connect the speaker to a PC Phone Tablet DVD player etc e The Power on off switch is positioned at the rear of the active speaker e The amplifier volume control is on side panel of the active speaker e Optional remote volume control DIN connector and VR select switch on the active speaker Active speaker connections e Two RCA female sockets are provided at the rear of the amplifier for PC DVD audio input to the amplifier e The 3 5mm Mini Jack female output socket on the amplifier rear panel is for connecting the amplifier to the passive speaker e A2M euro mains lead and adapter to BS5732 Sahara Presentation Systems Plc Williams House Hailey Road Erith Kent DA18 4AA CONNECTORS amp CONTROL LAYOUT CLEVERAUDIO CLEVERAUDIO CONNECT TO THE O LEFT SPEAKER Product code 1050035 POWER SWITCH AUDIO OUT CEE Dx C R E INPUT C i AUDIO INPUT AC230V 50Hz PRODUCT SERIAL NR PRODUCT SERIAL NR 5 33551 JAMAGI 5055067 60 7335560 DO NOT D ol MAGE OR 505506 O E OR DO NOT DAI REMOVE THIS LABEL Product code 1050035 i WARNING A RISK OF ELECTRIC SHOCK DO NOT OPEN C GEOM Active speaker rear view REMOTE VR VOLUME
6. em accepts line level audio signals from sources such as PC s notebooks CD DVD players disc players iPod amplifiers tuners etc After use turn off the volume control which disconnects the amplifier and turn off the power switch on the rear plate turning of the internal power supply TROUBLE SHOOTING If the system is not operating correctly please check the table below If the problem persists contact your AV reseller immediately and disconnect the system from the power PROBLEM CHECKS TO BE MADE Check that the mains supply is switched on at the wall socket Check that the power switch at the amplifier rear panel of the active speaker is switched on Check that the volume control is turned up Check that the audio cables to your audio source are connected properly Check that the audio source is active and playing No sound from either speaker Check the mini jack cable connection at the No sound from Passive speaker active speaker and the connection at the passive speaker end SPECIFICATIONS Signal noise ratio gt 60 dB Dimensions mm 130 x 142 x 250 mm L x W x H Power Supply 230 Volt 50Hz Sahara Presentation Systems Plc Williams House Hailey Road Erith Kent DA18 4AA STANDARDS CE Approved product BS 5732 standard for Electrical Plug alternatively a Europlug to CEE 7 16 plug rated at 3A 230VAC Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2005
7. the rear of the active speaker unit and into the audio sources or cable termination box if used Plug the power cable to the mains supply and switch the supply on Follow the operating instructions on the following page Usage of the optional available remote control cable product Nr 1050035R 1 Switch the power on off switch at the rear panel in to its OFF position Place the DIN connector in the side panel position marked with remote VR Place the switch marked remote select to the position of select remote control 2 3 4 5 Switch the power button at the rear paneltothe ON position Switch the on off switch at the remote Volume Control unit in to the ON position The green LED on the remote control unit will light up to show it s functional Once the remote control cable is inserted and selected the volume control on the speaker will be functional until the switch marked remote select is set to its correct position Sahara Presentation Systems Plc Williams House Hailey Road Erith Kent DA18 4AA OPERATING INSTRUCTIONS Turn the volume control to it s off position Switch on the power using the on off switch on the Active speaker rear panel Adjust the volume control to increase the output sound level to your preferred level WARNING Always turn the unit on and wait for a moment before turning the volume control up High signal levels can damage the system on startup The syst
Download Pdf Manuals
Related Search