User Manual for Long Pipe Color Changer
Contents
1. 121 140 AUTO TWO GROUP MOVING 141 160 161 180 181 200 AUTO FULL COLOR FADING 201 220 221 230 231 240 241 255 DIMMER CHANNEL 2 17 DIMMER VALID 000 255 000 255 000 255 000 255 000 255 000 255 IST GROUP GREEN LED DIM MER 0 100 000 255 1ST GROUP BLUELED DIMMER 0 100 000 255 000 255 2ND GROUP GREEN LED DIMMER 0 100 000 255 2ND GROUP B LUE LED DIMM ER 0 100 000 255 3RD GROUP REDLED DIMMER 0 100 000 255 3RD GROUPG REEN LED DIMMER 0 100 000 255 3RD GROUP BLUELED DIMMER 0 100 000 255 4TH GROUP REDLED DIMME R 0 100 000 255 4TH GROUP GREENLED DIM MER 0 100 000 255 4TH GROUP BLUE LED DIMM ER 0 100 CLEANING AND MAINTENANCE The Operator has to make sure that safety relating and machine technical installation are inspected by an expert after every four years in the course of an acceptance test The operator has to make sure that safety relating and machine technical installations are inspected by a skilled person once a year The following points have to be considered during the inspection 1 All screws used for installing the devices or parts have to be tightly connected and must not be corroded 2 There must not be any deformations on the housing fixations and installation spots ceiling suspension trussing etc 3 The electric power supply cables must not show any damages material fatigue e g porous cables or sediments Furthur instructions dependin2. be transported Please consider that unauthorized modifications on the device are forbidden due to safety reasons If this device will be operated in any way different to the one described in this manual it may suffer damages and the guarantee becomes void Furthermore any other operation may lead to dangers like short circuit burns electric shock etc DESCRIPTION LED LAMPS 0 AC 90 250V oF CAN q N S DNXINPUT DMX OUTPUT gt MENU UP DOWN ENTER 3 4 CONTROL PANEL 1 DISPLAY WINDOW 2 MENU BUTTON 3 UP BUTTON 4 DOWN BUTTON 5 ENTER BUTTON SETUP 1 Rigging the device DANGER OF FIRE Make sure there is no inflammable material nearby during installing Follow the instructions stated on the housing and manual of this device DANGER TO LIFE Please consider the respective national norms during the installation The installation must only be carried out by an anthorized dealer This device can be installed directly onto a truss wall or ceiling in any orientation without altering its operation characteristics Use proper bolts or to mount the device via its mounting bracket The mounting bracket should be attached to the device by tighten the fixation screws Always use at least one safety rope as secondary safety attachment Always use safety ropes that can hold at least 10 times the weight of the device Using safety ropes through the hole on the housing Never use t
3. g After delivery do not switch it on immediately The arising condensation water might damage your device Leave the device switched off until it has reached room temperature This device falls under protection class I The power plug must only be plugged into a protection class I outlet The Yellow Green conduct should be earthed Do not connect this device to a dimmer pack For replacement use same type and rating lamps or fuses only Always plug in the power plug least Make sure the power cord is never crimped or damaged by sharp edges Check the device and the power cord from time to time Never let the power cord come into contact with other cables Handle the power cord and all connections with the mains with particular caution Only handle the power cord by the plug Never pull out the plug by tugging the power cord Make sure the available voltage is not higher than that stated on the rear panel Always disconnect from the mains when the device is not in use or before cleaning it Keep the device upright For overhead use mounting height gt 100cm always fix it with a safety rope Keep away children and amateurs from the device Never leave the device running unattended There are no serviceable parts inside the device except for the lamp and fuses Maintenance and service operations cab be only carried by authorized dealers Please note that damages caused by manual modifications on the device or unauthorized oper
4. Long Pipe Color Changer User Manual www makaudiodj com Fone 48 3828 7778 Lamp 252pcs R84 G84 B84 x10mm LEDs in 4 groups each group 63 Red21 Green21 Blue21 LEDs CAUTION Keep this device away from rain and moisture Unplug mains lead before opening the housing For your own safety please read this user manual carefully before your initially start up Every person involved with the installation operation and maintenance of this device has to be qualified follow the instructions of this manual consider this manual to be part of the total product keep this manual for the entire service life of the product pass this manual on to every further owner or user of the product include every supplementary update with the original manual Before your initial start up please make sure that there is no damage caused during shipment Should there be any do not use the device and consult your supplier SAFETY INSTRUCTIONS This device has left our premises in absolutely perfect condition In order to maintain this condition and to ensure a safe operation it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual Important Damages caused by the disregard of this user manual are not subject to warranty The dealer will not accept liability for any resulting defects or problems If the device has been exposed to drastic temperature fluctuation e
5. address you selected last time 2 Press Enter button 3 Press the UP or Down button to select from A001 A512 4 Press Enter button to save or Menu button to exit OPERATION 1 Working modes This device has 4 working modes DMX Sound active Auto and Master slave mode 2 Auto mode Press the Menu button until it shows dnCo Auto Soud or SLAU in the display What will be shown in the display is your last saved setting If it is not Auto in the display press Enter button and then press Up or Down buttons to select the Auto Press the Enter button the Auto operation is selected Press the Menu button until it shows CLO1 CL16 These are the different Auto programs Press the Enter button Press the UP Down button to select from CLO1 C116 Press Enter button Press the Menu button until it shows SP01 SP16 These are the speed of auto operation Press the Enter button Press the UP Down button to select from SPO1 SP16 16 is the fastest 01 is the slowest Press the Enter button Press the Menu button until it shows St01 St32 These are the strobe speeds Press the Enter button Press the UP Down button to select from St01 St32 32 is the fastest 01 is the slowest Press the Enter button Now the device will be operated automatically according to the program and in the speed you selected 3 Sound active mode This device is not designed with the sound operation The Soud option in the me
6. ation by unqualified persons are not subject to warranty OPERATING DETERMINATIONS This device is a lighting effect for creating decorative effects for discotheques stages etc It is allowed to be operated only with an alternating current of AC 90 250V 50Hz and is designed for indoor use only This device is not designed for permanent operation Consistent operational breaks will ensure that the device will serve you for a long time without defects Operate the device only after having familiarized with its functions Check the device carefully to see ifthe housing is firmly closed and with all screws tightly fastened Do not shake the device Avoid brute force when installing or operating When choosing the installation spot please make sure that the device is not exposed to extreme heat moisture or dust There should not be any cables lying around You endanger your own and the safety of others The minimum distance between the device and illuminated surface is 1 meter Make sure that the area below the installation place is blocked when rigging derigging or servicing the device Always fix the device with at least one safety rope Fix the safety ropes at the correct hole only The maximum ambient temperature ta 450C must never be exceeded Do not permit operation by persons not qualified for operating the device Most damages are the result of unprofessional operation Please use the original packaging if the device is to
7. e using controllers with this occupation you can connect the DMX out put of the controller directly with the DMX input of the first device in the DMX chain If you wish to connect DMX controllers with other XLR outputs you need to use adapter cables Building a serial DMX chain Connect the DMX output of the first device in the DMX chain with the DMX input of the next device Always connect one output with the input of the next device until all devices are connected Caution At the last device the DMX cable has to be terminated with a terminator Solder a 120 Q resistor between Data and Data into a 3 pin XLR plug and plug it in the DMX output of the last device 4 DMX start address setting The control panel on the housing of the device allows you to assign the DMX start address which is defined as the first channel from which the device will respond to the controller This device has 17 DMX channels If you set for example the start address to channel 1 the device will use the channels Ist to 17th for control The first available channel for the next fixture will be the 18th Please be sure that you do not have any overlapping channels in order to control each device correctly and independently from any other fixture on the DMX chain If two three or more devices are addressed similarly they will work similarly For address setting follow this procedure 1 Press the Menu button until it shows AXXX The XXX is the DMX
8. g on the installation spot and usage have to be adhereed by a skilled installer and any safety problems have to be removed DANGER TO LIFE Disconnect from mains before starting maintenance operation There are no servicable parts inside the device except for the lamp and the fuse Maintenance and service operation can be only carried by a authorized dealer Should you need any spare parts please use genuine parts Should you have further questions please contact your dealer TECHNICAL SPECIFICATIONS Power supply Power consumption Lamptype Control mode Dimmension Carton 4kgs 4 5kgs Please note Every information is subject to change without prior notice
9. he mounting bracket for safety ropes The installation should also be secured with an appropriate catch net so that no part of the device can fall down if the main attachment fails When rigging derigging or servicing the device staying in the area below the installation place on bridges under high working places and other endangered places is forbidden The operator has to make sure that safety relating and machine technical installations are approved by an expert before taking into operation for the first time and after changes before taking into operation another time The operator has to make sure that safety relating and machine technical installations are approved by an expert after every four year in the course of an acceptance test The operator has to make sure that safety relating and machine technical installations are approved by a skilled person once a year Machine technical installations in the sense of these instructions are all technical installations and working material used for operating places of events and productions for scenery presentations Procedure The installation should be attached outside areas where persons may walk by or be seated IMPORTANT OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE including but not limited to calculating working load limits installation material being used and periodic safety inspection of all installation material and the device If you lack these qualifications do
10. not attempt the installation yourself but instead use a professional structural rigger Improper installation can result in bodily injury and or damage to property The installation has to be attached out of the reach of people If the device is to be lowered from the ceiling or high joists professional trussing systems have to be used The device must never be fixed swinging freely in the room Caution Device in hanging installations may cause servere injuries when crashing down If you have doubts concerning the safety of an installation do not install the device If the device is to be installed to a trussing system use an appropriate clamp The maximum drop distance must never exceed 200 mm 2 Connection to mains Connect the device to mains with the enclosed power plug The occupation of the connection cables is as below Cable color Pin International brown live L blue neutral N yellow green earth amp The earth has to be connected 3 DMX 512 connection The wires must not come into contact with each other otherwise the fixtures will not work at all or will not work properly Only use a stereo shielded cable and 3 pin XLR plugs and connectors in order to connect the controller with the fixture or one fixture with another Occupation of the XLR connection DMX input DMX output XLR mounting socket XLR mounting socket 3 3 1 Ground 1 2 2 Data 2 1 3 Data If you ar
11. nu has no function 4 Master slave mode Master device setup Select a device as the Master device All other devices will be slave device Disconnect the devices from the DMX controller For the Master device select Auto operation for it according to the above steps Slave device setup Press the Menu button until it shows dnCo Auto Soud or SLAU in the display What will be shown in the display is your last saved setting If it is not SLAU in the display press Enter button and then press Up or Down buttons to select the SLAU Press the Enter button the device is selected as a slave device For all slave devices in a Master slave chain you must select SLAU by the control panel 5 DMX mode Press the Menu button until it shows dnCo Auto Soud or SLAU in the display What will be shown in the display is your last saved setting If it is not dnCo in the display press Enter button and then press Up or Down buttons to select the dnCo Press the Enter button the DMX operation is selected Press the Menu button until it shows AXXX The XXX is the DMX address you selected last time Press Enter button Press the UP or Down button to select from A001 A512 Press Enter button In the DMX mode you can control the device via a DMX controller DMX channels CHANNEL DMX VALUE DESCRIPTION 600 020 STROBE CHANNELZSPEED CHANNEL3 17 021 040 DIMMER VALID 047 060 061 080 087 100 101 120
Download Pdf Manuals
Related Search