未命名 -1
Contents
1. on the fishing line in a line and each at 5cm distance which can make sure all are clear when show on screen The distance of the Lead can be a litter longer than the last fish hook on the line See picture as below 2 Connection in parallel normally fix 2pcs fishhook just under the camera the length of the fishing line is according to the clarity of the water Make sure to fix one fishhook on the loop to avoid the mixing with another one See picture as below Notice DO NOT fix the fishing line of the fishhook on the wire of the camera which can destroy it Make sure to fix the fishing line on the groove part at the end of the camera body See picture at side Accessories Camera with wire and reel lpcs Lithium Battery pack lpcs Charger lpcs Float lpcs User manual lpcs Metal clip 8pcs 2 sets Specification Monitor Screen size 7 Digital TFT Screen TFT Resolution 800 480 Language English Power supply DC 12V Battery 4500 mAh Lithium Battery pack Battery working time 9 12 hours Working Temp 20 60 C2. R function Before the operation of the DVR function make sure the unit already has the SD card in it Press the button on the left side of the monitor to check the SD card see picture as below Press this button to release the monitor Insert the SD card here Monitor with DVR function C1 REC 2 PLAY G MENU EXIT 4 gt G lt o Operation of DVR 1 Settings Press MENU button to access the settings and press it again to change the different menu of settings Press the gt amp lt buttons to change the items under the each menu and press PLAY to enter into the settings of the each item The REC amp PLAY buttons are to decrease amp increase the numerical value of settings In settings of Time amp Date press PLAY to enter into the settings then press the gt amp lt buttons to change the value of the time amp date 2 Video Recording Press REC to record the video and press it again to finish the recording 3 Play the Video Press button of PLAY to play the recorded video continuously and press it pause Press gt amp lt buttons to display the next and previous recorded video 4 4 Take amp Play the Picture Press gt button to take the picture Press lt button to display the pictures taken by the camera and press gt amp lt buttons to display the next and previous pictures NOTES 1 After insert a new SD card or when the SD card has problem press the bu
3. Storage Temp 30 70 C Camera Lens COLOR CMOS CCD HD 800 TV lines Focus 3 6 or 4 0mm Visible distance clear water 1 3 m Working Temp 20 60 C Storage Temp 30 70 C
4. UNDERWATER FISHING CAMERA USER MANUAL K Dri 4 i a Read this manual carefully before Ny Please recharge the battery before your first time use Contents Warn aiid Pree at 00 ae uoe one Connechon e e e Installation of Float and Fishhook ACCO oS ee Speci GCAO Warning and Precaution Warning Please use the adaptor together with the product only We are not responsible for the problem caused by any other adaptor Precaution 1 A good image is not available when camera just opposite to the sun also for safety do not put the camera under the blazing sunshine for quite a long time 2 Put the camera at a appropriate position for a good image 3 To keep it well preserved please wash the camera and cable by soap or warm water after using 4 Warranty is not available if the unit being opened Introduction The model without sun visor oo QMVi V2 Qa ent 4 6 amp 9 V1 V2 To change the mode between 16 9 and 4 3 on screen display lt _ gt To change the direction of the image shows on the LCD screen totally there are 4 directions to have the correct display on it MENU To access the settings menu of Bright Contrast Color Mode TCON Language and Reset amp To decrease or increase the numerical value of the settings 1 To power on amp off the LCD screen DVR OPERATION this operation only available when the unit with DV
5. tton of REC the unit will check and display whether formatting the SD card press the button of gt amp lt to select Yes or No then press MENU to confirm the selection 2 Time and date will display at the bottom right corner all the time when the monitor is power on 3 The button of MENU is also to exit in any other mode The model with Sun visor this model don t support DVR function TFT LCD COLOR MONITOR 1 Mirror To change the direction of the image shows on the LCD screen total 4 directions to have the correct display on it 2 To change the mode between 16 9 and 4 3 on screen display 3 Menu To access the settings menu Bright Contrast Color Mode TCON Language and Reset 4 V Decrease the numerical value of settings 5 V Increase the numerical value of settings 6 POWER Power on amp off the monitor LCD screen Connection Firstly connect the battery to the power input cable from the monitor then connect the power output cable amp Video input connectors from the monitor with the camera See picture as below 6 Installation of the Float and Fishhook Float Firstly use a fishing line to fasten the float across the hole on top of it the length of the fishing line is according to your own choice And then select an appropriate place on the wire of the camera to fasten the float See picture as below a Fishhook 1 Connection in series Normally fix 2pcs or at most 3pcs fishhook
Download Pdf Manuals
Related Search