SS-HDR-8804 8808 8816
Contents
1. 47 Network Digital Video Recorder Operation Manual V1 1 Items 4CH H 264 DVR SCH H 264 DVR 16CH H 264 DVR Live resolution 720 x 576 PAL 720x480 NTSC Record resolution 352 x288 720x576 PAL 352x 240 720 x480 NTSC 352 x288 PAL 352x 240 NTSC Audio Avx4ch input BNC x Ich output Network port RJ 45 USB port HOST 2 0 in front panel HOST 1 0 in rear panel HDD port SATA PTZ control RS485 Power AC 220V 110V Appendix 2 Trouble shooting 2 Trouble shooting FAQ 1 Why cannot detect hard drive 48 Network Digital Video Recorder Operation Manual V1 1 Default cause The HDD power line or data cable is not connected well Resolution Please check the power cable and data cable And format the HDD 2 Why the remote control not work But the mouse is workable Default cause The remote control ID was set OFF in system menu Or it was set wrong ID 3 Can we delete a part of video file in HDD No it can t be done For the reason of safty we can t delete a part of video file n HDD Ifyou want to delete them please try to format HDD 4 Why alarm is not workable Default cause U The schedule setup is wrong 2 Alarm setup is wrong 3 Alarm cable connection is wrong 4 Alarm input signal is wrong 5 It is not recording 5 Why cannot find the video file in search menu after recording Default cause 1 The time segment for search is wrong 2 HDD cable is not connected well G S2. Network Digital Video Recorder Operation Manual V1 1 1 Move the cursor Move the mouse 2 Move the cursor to the bottom of the screen to pop up the mouse tool bar Move the cursor onto the icon to show the name 1 To select shield area in Camera setup Drag the mouse l l l l 2 To select motion detection area in Motion alarm To change the value or digital in menu mode Chapter III Menu Setup Summary of menu operation In live preview mode select menu key in the remote control the front panel or click El icon in mouse menu to enter the main menu Press ESC key or click the close icon that on the top right of the menu to exit from the main menu Main menu is as follows Please press in the front panel 4 in the remote control or left right click with the mouse to change the parameter value in the sub menu Press 4 y key inthe remote control or in the front panel to move the cursor or move by the mouse Click to save the value and click GS to exit from the menu 21 Network Digital Video Recorder Operation Manual V1 1 A un Y SYSTEM CAMERA RECORD SCHEDULE ALARM HARD DISK USER SETUP Ea D G e 5 Vy E NETWORK TZ SETUP Main menu 3 2 System setup 1 Time setup used to adjust the system date and time 2 Time format used to set the format of date display Asia Europe America are optional 3 Time DISP POS display pos
3. Digital Video Recorder Operation Manual V1 1 d gt Before connecting to other facilities please disconnect the power supply and pull the power line plug out from the power socket In case of any solid or liquid coming into the case please disconnect the power supply immed lately and the DVR can be restarted only after being checked by qualified servicemen Ifthe DVR is not in use for a long period of time please disconnect the power supply and pull the power line plug out from the power socket This is a precise instrument No internal part can be repaired by the users If fault occurs it is necessary to ask qualified servicemen to repair 1t or contact the dealer Network Digital Video Recorder Operation Manual V1 1 Table of contents of contents ChapterT Product Introducir AAN 6 Tee 6 12 Functions and Een E 6 Chapter Il Operation IOS TFUC ONOS ee aoe on eK Gen lene COR c Nero ones enone ser ttnt etenee 8 cb Description of E E EE 8 DD Description OE ce eat pane bm AA E NAS 12 23 Comeciion Here E 15 DA Description of alarm port im the rear parecian aa 16 25 Remote control operation ricas uscar no 17 STE 20 Chapter II Menu Setup Rd ae 21 a o oo A on 21 Network Digital Video Recorder Operation Manual V1 1 SEENEN 22 mm 23 Be TRS Oh Seg epee eee 25 e e AE 26 3 6 Motion alarm a 27 A O ea 28 e E E E E E 29 PE E E re 30 ERLE E l a A E EE e 31 SCH eebe 32 Chap
4. amp NTSC video signal input Support OSD languages of multiple countries Support external alarm motion detection and time recording Support audio recording audio playing and live mode listening Network Digital Video Recorder Operation Manual V1 1 Ifthe electricity suddenly off while recording it will record automatically when power on Support CMS Support DDNS Support network preview playback setup remote recording PTZ control and camera name setup Support IE browsing and Network remote Client Support Internet backup USB backup Support mouse operation with high sensitivity Support DVD RW and 1000G hard disk Support VGA output Support remote control Convenient amp precise video searching Control PTZ and speed dome through RS485 Specially designed dedicated file system for video to increase more than 10 times of service life of hard disk Fully independent from PC platform and free from computer breakdown due to improper operations complicated management amp operations as well as virus infection and with high stability Operating system Linux Compressed chip SOC Network Digital Video Recorder Operation Manual V1 1 Chapter II Operation Instructions Description of front panel Description Press it to turn on off the DVR The same as the key in the remote control a input numbers b keystroke 1 9
5. inner ring leftward rightward to move the cursor upward downward Connected to USB disk and used for system software upgrade or video file backup Insert the U disk after turn off the DVR You d better not connect the mouse here 11 Operation Manual V1 1 Network Digital Video Recorder Description of rear panel Rear panel of 4 channel H 264 DVR 4 o Fa an gt Rear panel of 8 channel H 264 DVR MON CH1 CH2 CH5 CH7 CH8 LOOP OUT Ei maa ABaezoQ12345678 B 5Z2 baal N L AUDIO OUT o IE 11 E a LS Network Digital Video Recorder Operation Manual V1 1 Rear panelof 16 channel H 264 DVR PR Pe SP on ga nr KS Se KS KS LI hd 2 4 AUD T Port Description Video input Standard BNC port connected with the camera and speed dome Video output Connected with the video input of the monitor Loop output Standard BNC port connected with the monotor etc 485 port RS485 devide into A and B it can control PTZ via the mouse remote control External alarm port and network ClientConnected with alarm inout and output 13 Network Digital Video Recorder Operation Manual V1 1 Connected to USB pendrive or mouse and usedfor system software upgrade or video file backup Itsupports hot plug Standard RJ 45 network port connected to network cable and used for remo te browse or control VGA
6. screen Press it to preview in PTZ mode The monitor display sixteen split screen Press it to decrease the data in PTZ mode In live preview mode press this key to automatically switching full screen images Press it to increase the data in PTZ mode In PTZ control mode press it to move the cursor among the digital in the screen Enter into PTZ mode Press it again or press ESC key to exit In PTZ control mode this key is used to zoom in out In PTZ control mode F F key is used to prolong shorten the focus 19 Network Digital Video Recorder Operation Manual V1 1 IRIS In PTZ control mode I I key is used to enlarge reduce the iris aperture Standby Mouse operation USB mouse can be used Hot swap for mouse is supported Move the mouse cursor onto the mouse icon to see the name Please insert the usb mouse into the usb port of the rear panel 1 Select or cancel J in the item 2 Input password in user log in interface l 3 Click the close icon on the top right of the screen to exit from the main menu Left click the mouse 4 In split screen mode click one of the channels to make it full screen Click it again to return to split screen Switch single channel screens 5 Switch single channel screens l 1 In live or playback mode it could swich the single channel image Right click the mouse l 2 In menu mode it could modify the data 20
7. screen it will display mouse icon while it is under playback E click this icon to fast rewind when playback 8 click this icon to fast forward when playback Note This DVR could not support sixteen channels playback so clicking WJ is invalid 43 Network Digital Video Recorder Operation Manual V1 1 Audio setup Press the AUDIO in the front panel or press the key in remote control or click the icon 42 with mouse to enter audio setup interface Take 16 AUDIO SETUP channel DVR as example NE E CH02 RW CH03 Mele CHO6 Ml CHO7 Ml CHO8 ml CH10 BR CH11 Ml CH12 a CH14 Ml CH15 Ml CH16 ENTER 1 Mute Select mute then there is no audio output in live mode and the audio icon will turn to kJ Press SSS key to save this setup 2 Network select network audio output 3 It supports Ach audio input and Ich audio output Click 5 16 CH is invalid Note No audio output in 4 or 8 channel playback mode SEQ Press SEQ in the remote control the front panel or click the icon 8 with mouse to start SEQ Then it 44 Network Digital Video Recorder Operation Manual V1 1 will display the icon on top right of screen It will switch automatically between 1 channel quad Sch and 16ch The interval is 5 second Click the icon 8 with mouse or press SEQ key in the remote control to end SEQ Spot output In live preview mode press SPOT key
8. select channels c 0 10 input the number 0 Press it twice to select channel 10 Combined number keys 1 9 to select the channels from channel 11 to 16 d input password Network Digital Video Recorder Playback Pause Search Os Operation Manual V1 1 Record LED indicator light It is on in recording mode Remote signal receiver LED indicator light It is on in remote control usable mode Alarm LED indicator light It is on when alarm happened Network LED indicator light It is on in network connection mode Lock LED indicator light It is on in locking mode Hard drive LED indicator light It is flash when hard drive is being used Receive signal from remote control Do not cover Start recording In PTZ mode it is used as Z key in the remote control Press it to pop up search menu select a video file to play Press it to pause in the process of playback press it again to play again In PTZ mode it is used as Z key in the remote control In playback mode press it to stop playing and return to search menu in video recording mode press it to stop recording in PTZ mode press it to view preset image Press it to enter search menu In PTZ mode press it to set preset image Network Digital Video Recorder Operation Manual V1 1 PTZ PTZ Press it to enter PTZ mode press again to exit COPY Press it to enter backup menu Press it to enter system inf
9. video signal output port connected with the VGA port of a computer monitor Connected with earphone or cable speaker Audio input Connected with audio input device e g microphone SPOT port Connected with spot output device to view the live image independently 14 Network Digital Video Recorder Operation Manual V1 1 Connection figure of rear panel Take 16 channel DVR as exampleto show howto connect op op Video input cameral cameral6 video output Loop output PTZ USB mouse VGA output audio input port spot output Mk 3 alarm port amp e network port audio output 15 Network Digital Video Recorder Description of alarm port in the rear panel Connection figure of alarm input and ae m ALARM 12345678 LI sre input prz a alarm output stern D u 200 Qar Description Operation Manual V1 1 ALARM 991234567 8 91011213141516 alarm input alarm output 16 channel 1 1 16 is alarm input NC NO COM Alarm relay output NC is normal close NO is normal open COM isthe public terminal 2 Itis ground wire Prompt To make the machine work well please follow the above figures to connect Please power off each device before connection Network Digital Video Recorder Operation Manual V1 1 Remote control operation 1 Installing the remote control
10. 0 control interface are TT d A A HR 2 d Ge ai 7 gt y C 37 Network Digital Video Recorder Operation Manual V1 1 Characters PTZ CAMO1 SPEED 16 DATA 01 display on the top of the monitor screen indicating the DVR is under PTZ control PTZ control parameters of each channel can be modified in the system menu Press PTZ key again or press ESC key or click the icon E to exit from PTZ control mode When the mouse moved to the bottom of screen 1t will display the following icons YU OSEA Please check the following table for the symbol of these icons Description Direction icon Control the camera a Control the dome camra to rotate automatically to turn up down left and right Click the icon again to stop it Zoom icon Control the focal dista Preview preset key nce of zoom bed Preset key Shut off PTZ menu And exit from PTZ control Modify the parameter When the cursor is on PTZ CAMO1 SPEED 16 DATA 01 you could select camera set the speed and preset the 38 Network Digital Video Recorder Operation Manual V1 1 data of image point Select the item which need modify by pressing SPOT key in the remote control or clicking the item directly with the mouse Then change the data by pressing H SEQ in the remote control or left right click with mouse Preset operations include set and view 1 Select image point in the selected camera b
11. 2 Baudrate to set baudrate corresponding to the current channel PTZ 3 Device ID to set ID address corresponding to the current channel PTZ 4 Protocol set communication protocol corresponding to the current channel PTZ Note the above parameters of each channel must be consistent with the setting of PTZ or it cann t be controlled 28 Network Digital Video Recorder Operation Manual V1 1 Network setup NETWORK SETTING IP ALLOCATION DHCP DDNS IP ADDRESS 192 168 001 GATEWAY 192 168 001 SUBNET MASK 255 01255 ES DVR PORT IE PORT 1 IP allocation STATIC and DHCP DDNS optional In static mode please set IP address gateway and subnet mask In DHCP mode DVR could get IP from DHCP server Please refer to the Client and network manual in the accessory CD 2 IP address It must be unique to avoid colliding with other DHCP 3 Gateway and subnet mask Gateway is the LAN IP address of the router 4 DVR port Transfer date stream such as video and audio frequency 5 IE port Download ActiveX control Default 0080 Note When using network browse IP address gateway subnet mask port of the DVR must be consistent with the setting of the router 29 Network Digital Video Recorder Alarm setup BUZZER 7 7 Y 7 C Z 7 7 Y 7 7 7 7 YA 7 Z 7 7 There are two ways for alarm output Buzzer and Relay They include three alarm modes 1 Video lo
12. Design and description of this product are subject to change or renewal without notice Unless allowed in the Copyright Law it is prohibited to reprint adoptor translate the content hereof without prior written permission All functions of full edition model are described in this Manual Half edition model is only equipped with some of its functions 4 8 16 CH NETWORK DIGITAL VIDEO RECORDER RS MOTION IR MA SCHEDULE CMS MOBILE AUDIO MOUSE LOOP SPOT USER S MANUAL DVD RM Network Digital Video Recorder Operation Manual V1 1 In order to ensure your rights and interests please read this manual carefully before you install O O CAUTIONS and use the DVR Use the appropriate adapter for the DVR To protect the main chip from thunder striking please make sure the ground wire is correctly connected before using the DVR Do not expose the DVR to rain or use it under high humidity circumstance This DVR cannot be installed at the places with much dust and avoid potential mechanical vibration or impact Install this DVR under good air circulation conditions Do not place it near the heater or under direct sunlight Please choose high quality hard disk HDD which could meet the working demand of the DVR For its quality please purchase hard disk from regular merchants and do not use the Western C Digital hard disk SS y Network
13. EXIT 1 User name ADMINO USER01 USE02 and USERO3 are optional and changeable ADMINO is default administ rator account 2 Password set separate password for each user Factory default setting ADMIN 000000 USERO1 111111 USE R02 222222 USERO3 333333 3 Permissions set the operation permissions for users by admin Users can t operate the function which does not be selected Note If the DVR is locked UJ will display in the top right of the screen Click the icon to input password If the icon turns to Kl DVR is unlocked 32 Network Digital Video Recorder Operation Manual V1 1 Chapter IV Basic Operations Turn on DVR e Please confirm each item in AUTION has been done before turning on DVR e Please check whether the system connection is correct input output equipments are connected well and the power sup ply is on before turning on DVR e Please make sure video format PAL or NTSC of video in put and the monitor format meet the requirements e After checking without problems plug in the power cable of DVR then turn on the power switch on the rear panel of DVR e Ifitis in video recording mode before turning off last time it will resume video recording automatically when the DVR is turned on again Live screen 1 Turn on the DVR you could see the live screen If no video input the screen is as above Take 4 channel DVR as example 33 Network Digital Vi
14. Open the battery cover install two batteries Type No 7 make sure positive and negative Q poles are right then close the battery cover EN l O O O 2 Using the remote control O O Before using it please confirm that batteries have been installed correctly When using it En a please aim IR TX transmitter of the remote control at IR reception of the DVR Then the IR e e light in the front panel is on and the icon on the top right of the monitor screen turns to blue e ee m in O lt m lt p J The DVR can be controlled by the remote control Note If you don t want to use the remote control you could set in the system setup menu Set the item REMOTE ID as OFF Then the IR Receiver light in the front panel will be off and the operation of the remote control is invalid E o 3 Trouble shooting Digital Video Recorder Ifthe DVR can not be controlled by the remote control please check the following aspects l 1 Check the positive and negative poles of the batteries 2 Check the electric quantity of the batteries 3 Check that whether Remote Sensor are blocked or not 4 Whether Fluorescent lamps are being used or not nearby 17 Network Digital Video Recorder Operation Manual V1 1 Function description NO Key Name Description In normal running mode press key to pop up a menu to prompt whether to 1 O Pow
15. and recording E E ve Ee CAMO8 STOP LOSS 2009 08 19 11 35 41 1 1 i 1 1 CAMO7 STOP LOSS 2009 08 19 11 35 41 etc Set the time segment then click Search 1t will display the oS C So CAM0O5 STOP LOSS 2009 08 19 11 35 41 information CAM04 STOP LOSS 2009 08 19 11 35 41 CAMO3 STOP LOSS 2009 08 19 11 35 41 CAMO2 STOP LOSS 2009 08 19 11 35 41 CAM0O1 STOP LOSS 2009 08 19 11 35 41 SEARCH Recording preparation e Make sure all the equipment is power on before recording Make sure that there is video input and test audio in put by live monitoring e Press INFO key to check disk information and the remaining capacity of the hard drive If there isn t much capacity left pls firstly consider to replace hard drive backup the video or overwrite the video e Ifnecessary enter the RECORD SETUP to set audio recording video image quality and recording frame rate e If DVR is equipped several hard drive please enter DISK MANAGEMENT to check the hard drive information 40 Network Digital Video Recorder Operation Manual V1 1 by press al key in the front panel or press key in the remote control or click disk name with mouse e Firstly confirm that recording mode of each channel in schedule setup time alarm motion alarm motion and time segment setup e Start recording Press the key e in the front panel remote control of DVR to start recording Or click the icon dh by mouse e When DVR is u
16. d it will turn back to the search menu automatically SEARCH MENU VALID TIME 2009 08 19 TO 2009 09 17 BACKUP DEVICE DVD 1 5G 01 lo2 EN 104 DATE 2009 09 07 SIZE M STARTTIME 9 55 END TIME 10 55 Y q A AAA gt CAECULATE BACKUP 5 Before backup please calculate the capacity of the video first Click the icon ES to calc ulate the video you need to backup If the video capacity is large 1t will remind you waiting until calculation fi nished 6 Before backup please connect the backup device to DVR e g USB pendrive USB HDD etc You 42 Network Digital Video Recorder Operation Manual V1 1 could select the time segment you need to backup with mouse And click the Backup icon to start backup The process will last for a few minutes When backup finished please remove the device from DVR 7 Please note that the size of video file should not exceed the maximum capacity of backup device If system can not find backup device it will be back to search menu 8 On the bottom of screen it will display the playback mode PLAY gt normal speed playback PAUSE UU pause STOP stop playback FAST D gt 22 FAST DD 24 FAST DD 26 FAST DD 10 FAST DD 222 FAST PD x 04 Twice 4 times 8 times 16times 32 times 64 times forward BACK 32 EACK K4 BACK ESB BACKA 2 BACK 2 82 BACK eg Twice 4 times 8 times l 6times 32 times 64 times rewind When you move the mouse cursor to the bottom of
17. deo Recorder Operation Manual V1 1 2 Channel name and record mode icon display in the bottom left of each channel Description of record icon and mode Color and symbol Mode description Is is recording by motion alarm e Red S It 1s recording by sensor alarm Red L Image lost in the process of record en Red T It is recording by time CIO o mestre et sen o metida 3 Icons in top right of the screen 34 Network Digital Video Recorder Operation Manual V1 1 Description Remote IR Audio Infomation Unlocked Click it to lock Locked Click it to login by inputting password Remote control is opened Click it to close Remote control is closed Click it to open Audio output is open Click it to enter into audio setup menu Audio output is closed Click it to enter into audio setup menu Hard disk is normal Click it to pop up info menu Hard disk is full Click it to pop up info menu No hard disk Click it to pop up info menu 4 Move the mouse cursor to the icon MD in the bottom left of the screen Mouse tool bar will pop up as follows Take 16 channel DVR as example 35 Network Digital Video Recorder Operation Manual V1 1 Name Description Split screen Click itto display quad nine split screen and sixte en sp lit s creen Record Click it to starting recording play Click 1t to enter the menu of search amp playbac
18. er turn off The DVR will be turned off Press the key about 3 seconds the DVR will start 2 Audio Audio setup menu will pop up r ep 8 Ninh Select channels or set up password Input nunber 0 Press it twice to select channel D SE 10 Combined number keys 1 9 to select the channels from channel 11 to 16 4 O Lock Lock the machine or change the user GO Remote ID Control the machine by remote control Q Record Press key to enter record mode Play amp pause In live or record mode press it to pop up search menu select a video file to play 5 Press it to play press it again to pause D Stop Press it to stop playing Info Press 1t to pop up information menu 18 Network Digital Video Recorder Forward Rewind Operation Manual V1 1 In playback mode press gt key to play images forward or backward at 2X speed Press it twice to play at 4X speed Press it third time to play at 8X speed four times for 16X five times for32X six times for 64X Direction Confirm Exit Menu Quad Eight split Sixteen split SEQ Sequence SPOT Spot output PTZ PTZ AUTO AUTO Z Z Zoom in out F F Focus To move the cursor up down left right to select items or modify data And control PTZ to move Confirm the operation Cancel the operation and exit Enter into the main menu The monitor display quad screen Press it to set preview point in PTZ mode The monitor display eight split
19. ess of the channel 4 HUE used to adjust Hue chroma of the channel 5 Contrast used to adjust contrast of the channel 6 Saturation used to adjust acutance of the channel 7 Sopt time set the time interval of spot output for the correspond channel 1 e the display time of each channel 8 Mask area setup Mask area to shield some area by black square It will turn to black in surveillance or record mode a Left set the left border for mask area b Right set the right border for mask area b Top set the top border for mask area d Bottom set the bottom border for mask area 24 Network Digital Video Recorder Record setup 352x288 352X288 352X288 352X288 352X288 352x288 352x288 352X288 BERR RES SAVE RECORD SETUP 352X288 352X288 352X288 352X288 352x288 352x288 352x288 352X288 SAVE Operation Manual V1 1 Y m m E 1 Resolution 352X288 PAL 352X240 NTSC 4 channel and 8channel DVR could be changed into D1 resolution 720X576 PAL 720X480 NTSC 2 Quality the higher video quality the larger occupied HDD space 3 Frame rate used to set the quantities of images that recorded in one second 25fps PAL and 30 fps NTSC is real time recording 4 Audio used to turn on or turn off the audio record This DVR support 4 channel audio so click 5 16 channel audio is invalid 25 Network Digital Video Recorder Schedu
20. h mouse to enter user login interface USER LOGIN ADMINO AO EXFF Press key in the front panel or 4 key in the remote control or click the User name box with the mouse to select user name and input password Please refer to 3 11 User setup for specific operation 4 14 PLORE AIRIS You could control the DVR via client software on PC Please refer to lt Client and network manual gt attach ed in CD 46 Network Digital Video Recorder Operation Manual V1 1 Power off Normal power off Stop all the operations press O in the front panel remote control or click WW icon on bottom left of screen And select Enter to make it power off When power off the Power LED light will turn green If you want to restart DVR press the in the front panel remote control for 3 second and it will power on Abnormal power off Abnormal power off refer to shut off the power supply when it is running especially under recording Please try your best to avoid such accident Appendix 1 Technical parameters Items 4CH H 264 DVR 8CH H 264 DVR 16CH H 264 DVR Video input 1 0Vp p 75 Q BNC x4 1 0Vp p 75 2 BNC x8 1 0Vp p 75 2 BNC x 16 Video output D 1 0Vp p 752 BNCx1 VGA outputx 1 4ch opto coupler input 8ch opto coupler input Loch opto coupler input Alarm output Relay output NO NC COM Alarm mode Sensor alarm motion detection video loss HDD full alarm
21. in remote control or click icon with mouse to enter SPOT output setup menu Take 16 channel DVR as example 1 AUTO After select this item the system will output sequen SPOT SETUP ce image according to default SPOT out put interval time You could set the time for SPOT output as the following CHO2 MAI MAN operation CHO6 ml CHO7 ml CHOS ml Enter Camera setup menu Move the cursor on SPOT TI CH10 Me CH11 Et ME then you could set the time by pressing 4 gt key CH14 Me CH15 Mi CH16 i or left right click with the mouse It could be set as O second ENTER or 5 30 seconds If output interval of some channel is 0 sec ond that channel won t output For example 8 seconds for channel 1 0 seconds for channel 2 3 seconds for cha nnel 3 then in spot output mode channel 1 will turn to channel 3 after the image displaying 8 seconds channel 3 will turn to the next channel after the image displaying 3 seconds and so on 2 If any channel from CH1 to CH16 is selected the image of those channels will be spot output Note Video input is necessary for Spot output 45 Network Digital Video Recorder Operation Manual V1 1 User login Press the Lock key on remote control or click the icon J on the top right screen with mouse the icon will turn to red UJ It means the system is locked Then you need to press Lock Esc key in the remote control the front panel or click the icon UJ wit
22. ition of time and date top middle bottom middle no display are optional 4 Border DISP to select the color of borders green black white off are optional 5 Video format to select the video mechanism PAL NTSC are optional The DVR system will be forced to rest artafter switching 22 Network Digital Video Recorder Operation Manual V1 1 6 Remote ID used to set the remote control ID corresponding to the current machine so as to make remote control off on numbers from 0 to 9 are optional 7 Alarm spot pop up on off Open or close the function 8 Alarm main pop up on off Open or close the function 9 Transparency set the transparency of the menu The larger value the higher transparency 10 OSD Language display the language of the operating system Fa SYSTEM SETUP TIME SETUP 2009 09 07 10 19 TIME FORMAT U S MM_DD_YYYY TIME DISP POS TOP MID BORDER DISP GREEN VIDEO FORMAT PAL REMOTE ID ON ALARM SPOT POPUP OFF ALARM MAIN POPUP OFF OSD TRANSPARENCY 0 OSD LANGUAGE ENGLISH Ly ECH DEFAULT LOAD SAVE Camera setup 1 Camera used to select the channel to be revised parameters 23 Network Digital Video Recorder Operation Manual V1 1 CAMERAO1 01 00 2 Camera title used to set the camera title Press key in the remote control the front panel to turn into bitmap the camera title couldn t be changed 3 Brightness used to adjust brightn
23. k Stop Click it to stop recording or stop playing and return to the search menu Main menu Click it to enter into the main menu PTZ Click it to enter into PTZ control interface Click it to switch channels in sequence per 5 seconds Click it to enter into SPOT output setup interface Click it to pop up a menu for turning off the power or not Software update 36 Copy the new version software to the root directory of USB pendrive the file name is fireusb Turn off the DVR Insert the USB pendrive with software into USB portin DVR front panel then power on again 30 seconds later t will pop up Software updating and Time s on the screen the system update automatically When Update ok reboot please pop up on the screen update is finished Please pull out the U disk and restart Network Digital Video Recorder Operation Manual V1 1 the machine If Update fail try again pop up more than 4 times please contact after sales service department to deal with it e In the process of update please ensure no power breakdown and don t pull out USB pendrive or update will be unsuccessful e Make sure U disk works in good condition so as to avoid abnormal performance in the process of update 4 4 PTZ control In live or recording mode press PTZ key in the remore control the front panel or click the 9 icon in mouse menu to enter PTZ LR CPU O e e e gt f PTZ CAMO1 SPEED 16 DATA 0
24. le setup ALL ALL START TIME END TIME 00 00 00 00 00 00 00 00 SAVE 24 00 00 00 1010 1010 mee 00 EXIT Operation Manual V1 1 ALARM TYPE MOTION TIME MOTION TIME 1 Camera used to select the channel to be set The parameters are effective for all channels after selecting All CAM 2 Day used to select the day of video schedule The parameters are effective for all days after selecting All DAY 3 Segment 1 4 set corresponding video type of relevant time range The time could be set from 00 00 to 24 00 Record type could be time alarm motion alarm motion Note e The start time must be earlier than the end time or it will report error and won t exit e After exiting from this menu please press REC key or click the record icon or the schedule record won t startup 26 Network Digital Video Recorder Operation Manual V1 1 Motion alarm CAMERA 01 006 1 Camera used to select the channel to be set 2 Sensitivity low high optional from 1 10 The bigger number the higher sensitivity 3 Detect area setup drag the mouse to set the detection area as light blue square When motion occurs the area turn to red 27 Network Digital Video Recorder PTZ setup BAUDRATE DEVICE ID PROTOCOL 1 Camera to select the channel to be set Operation Manual V1 1 CAMERA 01 9600 01 PELCO_D2 A O
25. nder recording the HDD light in the front panel will flash Please select the recording chamel according to fact need so as to save more HDD capacity e It will be back to live when you press icon in the remote control the front panel Also you could click icon 1 by mouse to be back to live Press ESC key and select YES to stop recording Press key or click RW icon in live or record mode to enter search menu this menu is used for search play back and backup video file Adjusting time to search and select video file 1 Valid time It shows the valid time from the earliest recording time to the latest recording time 2 You could select any four channels to playback simultaneously as you like orsingle channel to playback by select the number in the CH box Press key in the remote control or click Kl icon with the mouse to playback 8 channel simultaneously 41 Network Digital Video Recorder Operation Manual V1 1 3 Backup device You culd select DVD 1 5G or USB pendrive in device item The maximum capacity for DVD disk should not exceed 1 5G 4 In option of date and start time input the date and time you need to play you could press key in the front panel or press key in the remote control to select the start time Or you could use mouse to drag the arrow Y under the time scale to select the start time and click the icon to playback When playback finshe
26. ormation menu l Press it to exit from the inferior menu and return to the superior menu In Exit ESC l l record playback mode press it to turn back to live mode In live preview mode press this key to switch full screen images by sequence Audio Press it to pop up audio setup menu O Menu Press 1t to pop up the main menu SPOT output SPOT Press 1t to pop up SPOT setup menu LOCK Lock the machine a 4 7 gt are direction keys In menu mode select the listed options upward downward leftward rightward in PTZ control mode control the dome a Y gt to rotate upward downward leftward rightward 4 confirm the selection and operation b 14 e v could be Quad nine split screen and 1 6 split screen key in live mode c rewind and forward in playback mode Change Direction split confirm keys the parameters value in menu mode 10 Network Digital Video Recorder Shuttle USB port z Operation Manual V1 1 In playback mode rotate the shuttle outer ring Leftward rightward once to fast backward forward at 2 x speed rotate it twice to play at 4 x speed Rotate it third time to play at 8 x speed four times for 16x five times for32 x six times for 64 x In menu mode rotate the shuttle outer ring leftward rightward once to in crease decrease the set value rotate it leftward rightward to the end to increase decrease the set value successively rotate the
27. ss alarm Loss 2 Video motion detection alarm Motion 3 Sensor input alarm Sensor Operation Manual V1 1 O MAMMA y SERRE Setup way Press key on the remote control or click with the mouse to display or cancel v in the small boxes E B is page turning icon 30 Network Digital Video Recorder Operation Manual V1 1 Disk management FORMAT 1 Overwrite If click J the previous recorded video will be replaced in turn when the hard disc is full If not record will stop When you record again the system will prompt open overwrite function or format the hard disk 2 Disk name select Disk 3 Disk capacity used to display capacity of the current disk 4 Remain capacity used to display percentage of the remaining capacity of the current disk 5 Bad area used to display bad size of the current disk 6 MAA used to format the current disk Note You d better format the hard disk before the first recording to protect the record video file 31 Network Digital Video Recorder Operation Manual V1 1 User setup Password is needed to log in by admin Input the password by click the numbers in the menu or press the numbers in the remote control the front panel l is used to clear the former Number is used to clear all Numbers Then click to enter USER SETUP menu rt ht IN ADMINO 000000 z Z o z o y 8 Z CEET
28. ter IV Basic Operations ee 33 GW WE ER EE 33 We ae O A A A 33 AS SOMA UPA EE 36 TN TTD eal eee A e ieee 37 Network Digital Video Recorder Operation Manual V1 1 EE 39 o N E E E E N E E O 40 AT P A O E E E E E ee E E 40 A E E Su E playback and E EE 41 ATO Pa Ti tng geet e E ete cpt eee eee eget ee ees 44 e 44 A o o A 45 EE ee 46 4 14 PC Client software instruction e 46 4 15 Power aia 47 Appendix 1 Technical parameters n ARANA AAA 47 Appendix 2 Trouble shooting EE 48 Network Digital Video Recorder Operation Manual V1 1 Chapter I Product Introduction Summary This equipment is a standalone digital hard disk video recorder specially designed for security It adopts the emb edded processor and embedded operating system and integrates with latest technologies in IT field such as video fre quency audio frequency compression decompression large capacity hard disk storage TCP IP net work remote cont rol etc investing the system with high intellectualization and stability This equipment supports various networks including Ethernet and Internet to realize remote audio video synchr onization With easy operation it can be applied to the security for banks telecom schools hospitals supermarkets residential quarters factories companies warehouses restaurants hotels parks museums water conservancy facili ties entertainment places and other fields Functions and features Support PAL
29. y WI key set a number for the image point in DATA such as 01 then press EH key on the remote control or click icon Set is finished 2 To view of image point which has been preset you could select the corresponding number in DATA then press Och split key EE on remote control or click J icon by mouse INFORMATION TOTAL CAPACITY 074 Press INFO key or click theicon J with mouse it will REMAIN CAPACITY 099 COVERAGE 000 display the interface of system information as following BAD AREA 000 z RECORD START TIME 2009 08 19 11 40 00 1 HDD QTY the number of the hard drive which connected RECORD END TIME 2009 09 07 10 20 00 DDNS www dvrserver net 25A0001 with the DVR DVR IP 192 168 001 207 DWRPORT 6802 CLIENT IP 2 Total capacity total size of all hard drives in the DVR RENATA DRI Ver Sep 14 2009 16 05 08 LIB Ver Sep 12 2009 02 32 39 DVD RW not included 3 Remain capacity percentage of the remain size of hard drive A 4 Coverage percentage of overwriting of hard drive 39 Network Digital Video Recorder Operation Manual V1 1 5 Bad area bad size of the hard drive 6 Record start time the earliest record time 7 Record end time the latest record time A LOG LIST 4 6 LEVAIN START TIME AJAS END TIME 2009 08 19 Press INFO key twice to pop up log list menu SENT E e 2009 08 19 E It is used to check the information of power on off
30. ystem date was wrong 4 The system format was changed 6 Why there are no video output when connect DVR with camera Default cause 1 BNC connector not connect well 2 The system format is different between DVR and came ra 3 Modified the system date back 49 Network Digital Video Recorder Operation Manual V1 1 50 y NOTE The operation manual is for reference only Products may vary Products are subject to update without further notice Please contact the customer service department for latest program and supplimen tary informaton Any disputes or doubts in products description are subject to our final explanation y
Download Pdf Manuals
Related Search