INSTRUCTIONS MANUAL LS4506A
Contents
1. e Cardboard parts have been produced trom recycled paper and they should be disposed of into waste paper collection containers for recycling e Such materials are not suitable for being disposed of into garbage bins They should be delivered to recycling centres instead e Contact relevant centres in order to obtain information on methods and points of disposal Safety Information When you take delivery of your machine e Check for any damage to your machine or to its packaging Never start a machine damaged in any way make sure to contact an authorised service e Unwrap the packaging materials as indicated and dispose of them in accordance with the rules The points to pay attention during machine installation e Choose a suitable safe and level place to install your machine e Carry out the installation and connection of your machine by following the instructions e This machine should be installed and repaired by an authorised service only e Only original spare parts should be used with the machine Before installing be sure that the machine is unplugged e Check whether the indoor electrical fuse system is connected according to the regulations All electrical connections must match the values indicated on the rating plate e Pay special attention and be sure that the machine does not stand on the electricity supply cable e Never use an extension cord or a multiple socket for making a connection The2. add salt and rinse aid into your machine and adjust the water hardness setting and the rinse aid setting to the lowest position Solubility of the tablet detergents produced by different companies can vary depending on the temperature and time Therefore it is not recommended to use such detergents in short programs It is more suitable to use powder detergents in such programs Warning Should any problem which you have not encountered before arise with the use of this type of detergents contact the detergent manufacturers directly When you give up using combined detergents e _ Fill the salt and rinse aid compartments e Adjust the water hardness setting to the highest position and run an empty wash e Adjust the water hardness level e Make the suitable rinse aid setting Fln with rinse aid and making the setting Rinse aid is used to prevent the stay of white water drops lime stains white film strip shaped stains that may form on the dishes as well as to increase the drying performance Contrary to the popular beliefs it is used not only for obtaining shinier dishes but also for obtaining sufficiently dried dishes For this reason care should be taken that there is adequate amount of rinse aid in the rinse aid compartment and only polishing material produced for use at dishwashers should be used To put rinse aid remove the rinse aid compartment cap by turning it J Fill the rinse aid compartment with rinse aid
3. and wash big sized plates on the top basket Use wheels in order to change the basket height Open the basket retaining parts at the end of top basket rails by turning them to the sides and take the basket out Change the position of the wheels reinstall the basket to the rail and close basket retainer parts In this way you take the top basket to lower position Alternative basket loads Lower Basket Top basket b e R I i Faulty loads Important Note for Test Laboratories For detailed information on performance tests please contact following address dishwasher standardtest info In your email please provide the model name and serial number 20 digits which you can find on the appliance door PROGRAMMBESCRIPTIONS Programme items temperatures Type of food waste Pre wash to rinse coffee milk tea soups Sauces pasta soups sauces pasta Dishes with dense and loosen residue cold meats cold meats eggs pilaf potato eggs pilaf potato dirt waiting for a awaiting full load vegetables not kept vegetables not and oven dishes fried and oven dishes fried long time or then select a for long kept for long foods foods requiring hygienic programme washing Level of soil ooo o S omal medium medium Detergent amount A B A B A B B 25 cm 15 cm ae A 3 e oo o Swe ieee So 50T Wash we ens 2 ieee Programme duration min Electricity consumption 0 02 kW hours Water consump
4. balance disorder To remove the worktop remove the screws that hold the worktop which are located at the rear of the machine then son ik front panel 1 cm from the front side towards the rear and lift it Adjust the machine feet according to the slope of the floor 3 Fit your machine by pushing it undercounter without letting the hoses get crushed or bent 4 Warning After removal of worktop the machine should be sen in such a closed place of which dimensions are shown at fig Prior to using the machine for the first time Check whether the electricity and supply water specifications match the values indicated by the installation instructions for the machine Remove all packaging materials inside the machine Set the water softener Add 1 kg salt into the salt compartment and fill with water up to a level at which it will almost overflow Fill the rinse aid compartment PREPARING THE MACHINE FOR USE The importance of water decalcification For a good washing function the dishwasher needs soft i e less calcareous water Otherwise white lime residues will remain on the dishes and the interior equipment This will negatively affect your machine s washing drying and shining performance When water flows through the softener system the ions forming the hardness are removed from the water and the water reaches the softness required to obtain the best washing result Depending on the level of hardness of the inflowing water these
5. cut su PPR Close the water input tap separate the water input hose from the tap and clean the filter at the connection end of the hose Restart your machine contact the service if the error resumes l Close the tap Error of continuous water input Contact the service Water discharge hose is clogged The waste water in the j i machine cannot be The filters of your machine might be clogged discharged Power off on your machine and activate the program cancellation command If the error continues contact the service Intended water temperature could not Contact the service be reached faulty heater and heater sensor Alarm is active against Power off your machine and close the tap water overflow Contact the service Faulty electronic card Contact the service If one of program monitor lights is on and start Pause light is on and off Your machine s door is open shut the door If the programme won t start Check if the plug is connected Check your indoor fuses Be sure that the water inlet tap is turned on Be sure that you have closed the machine door Be sure that you switched off the machine by pressing the Power On Off button Be sure that the water inlet filter and the machine filters are not clogged If the lamps Wash Dry and End keep flashing e Water overflow alarm is active Turn off your tap and contact an authorised service If the control lamps won t go out after a wash operatio
6. help of wash dry and end indicators Wash Dry End 7 Salt Lack Warning Indicator In order to see whether softening salt in your machine is sufficient or not check salt lack warning lamp on the display When salt lack warning lamp starts coming on you need to fill in the salt chamber Rinse Aid Lack Warning Indicator In order to check that there is sufficient rinse aid in your machine check rinse aid lack warning lamp on the display When rinse aid lack warning lamp starts coming on fill in rinse aid chamber SWITCHING ON THE MACHINE AND SELECTING A PROGRAMME Switching on the machine Press the Power On Off key Select the program suiting your dishes via the Program Selection button ef Start the program pressing the Power Start Pause key Once the Power On Off key is pressed the lamp Power Start Pause is highlighted The lamp on Program Start Pause key goes off once the Program starts and the washing Drying lamp is highlighted Program follow up You can follow the program flow using the program follow up lambs located on the control panel Do not open the cover before As long as Washing and Drying goes the lamp Finished is on on the Washing Drying lamp goes on to light When drying is active machine stays silent about 40 50 minutes Once the program is over the lamp Finished is illuminated Changing a programme If you would like to change programs while a wa
7. hose to your machine fun water through it for a while before making the connection Connect the water inlet hose directly to the water inlet tap The pressure supplied by the tap should be at a minimum of 0 03 Mpa and and at a maximum of 1 Mpa lf the water pressure is above 1 Mpa a pressure relief valve should be fitted inbetween After the connections are made the tap should be turned on fully and checked for water tightness For the safety of your machine make sure to always turn off the water inlet tap after each wash programme is finished NOTE Aquastop water spout is used in some models In case of using Aquastop a dangerous tension exists Do not cut Aquastop water spout Do not let it get folded or twisted Water outlet hose The water drain hose can be connected either directly to the water drain hole or to the sink outlet spigot Using a special bent pipe if available the water can be drained directly into the sink via hooking the bent pipe over the edge of the sink This connection should be at a minimum of 50 cm and at a maximum of 110 cm from the floor plane max 110cm Warning When a drain hose longer than 4 m is used the dishes might remain dirty In that case our company will not accept responsibility Electrical connection The earthed plug of your machine should be connected to an earthed outlet supplied by suitable voltage and current If there is no earthing installation have a compet
8. load into your machine any dishes different or more than indicated Items not suitable for dishwashing e Cigarette ashes candle leftovers polish paint chemical substances iron alloy materials Forks spoons and knives with wooden or bone or ivory or nacre coated handles glued items items soiled with abrasive acidic or base chemicals e Plastic items that are not heat resistant copper or tin coated containers ae and silver objects they may discolour become ull Certain delicate glass types porcelains with ornamental printed patterns as they fade even after the first wash certain crystal items as they lose their transparency over time adhered cutlery that is not heat resistant lead crystal glasses cutting boards items manufactured with synthetic fibre Absorbent items as sponges or kitchen rags are not suitable for dishwashing Warning Take care to buy dishwasher proof sets in your future purchases INSTALLING THE MACHINE Positioning the machine When determining the place to put your machine on take care to choose a place where you can easily load and unload your dishes Do not put your machine in any location where there is the probability for the room temperature to fall below 0 C Before positioning take the machine out of its packaging by following the warnings located on the package Position the machine close to a water tap or drain You need to site your machine taking
9. not suitable for dishwashing Also do not fill any basket above its capacity Our company will not be responsible for any scratch or rust to form on the inner frame of your machine due to basket movements otherwise Especially because hot water may flow out the machine door should not be opened under any circumstances while the machine is in operation In any case a safety devices ensures that the machine stops if the door is opened Do not leave your dishwasher s door open Failure to do so may lead to accidents e Place knives and other sharp ended objects in the cutlery basket in blade down position f the supply cord is damaged it must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety f EnergySave option is selected as Yes The door will be opened at the end of the program Do not force to close the door to avoid harm auto door mechanism during 1 minutes The door must be open during 30 minutes to get effective drying in models with auto door opening system Warning Do not stand in front of the door after the signal sounds belonging auto open For your chi
10. plug should be comfortably accessible after the machine has been installed After installing the machine to a suitable place run it unloaded for the first time In daily use e This machine is for household use do not use it for any other purpose Commercial usage of the dishwasher will void the guarantee Do not get up sit or place a load on the open door of the dishwasher it may fall over e Never put into the detergent and rinse aid dispensers of your machine anything other than those detergents and rinse aids which are produced specifically for dishwashers Our company will not be responsible for any damage that might occur in your machine otherwise e The water in the machine s washing section is no drinking water do not drink it Due to danger of explosion do not put into the machine s washing section any chemical dissolving agents such as solvents e Check whether plastic items are heat resistant before washing them in the machine This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved Children shall not play with the appliance Cleaning and user maintenance shall not be made by children without supervision e Do not put into your machine those items which are
11. the machine Keep your detergents in cool dry places out of reach of your children Do not fill detergent into the detergent compartment more than required otherwise it may cause scratches on your glasses as well as lead to a poorly dissolved detergent Should you need more information concerning the detergent you will use contact detergent manufacturers directly Filling the detergent compartment Push the latch to open the detergent container as shown in the image Detergent pod has level lines inside It is possible to measure the right detergent amount using these lines Detergent pod can take totally 40 cm detergent Open the dishwasher detergent and pour into the larger seat E 25 cm if your dishes are Aoi soiled or 15 if they are less soiled A If your dishes have been kept dirty for a very long time if there are dried food wastes on them and if you have overly loaded the dishwasher pour a 5cm detergent into the pre wash compartment and start your machine You may have to add more detergent into your machine depending on the degree of soil and on the water hardness level in your area Combined detergents Detergent manufacturers also manufacture combined detergents that are called 2 in 1 3 in 1 5in 1 The 2 in1 detergents contain detergent salt or rinse aid While using the 2 in 1 detergents it should be observed which functions the tablet consists of The other tablet detergents also have detergent rins
12. when the arrow on micro filter can be seen from across Never use your dishwasher without any filter Incorrect fitting of the filter will reduce the washing effectiveness Clean filters are very important in terms of the proper running of the machine Spray arms Check whether or not the holes for the upper and lower spray arms are clogged If there is any clogging remove the spray arms and clean them under water You can remove the lower spray arm by pulling it upwards while the upper spray arm nut can be removed by turning the nut to the left Be sure that the nut is perfectly tightened when refitting the upper spray arm Hose filter Water is prevented by the inlet hose filter so as to avoid any damage to your machine because of any contamination sand clay rust etc that might be occasionally carried in through the mains water supply or the indoor plumbing and to forestall such complaints as yellowing and formation of deposits after washing Check the filter and the hose from time to time and clean them if necessary To clean the filter first turn off your tap and then remove the hose After removing the filter from the hose clean it under the tap Insert the cleaned filter back into its place inside the hose Refit the hose FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE ERROR CODE ERROR CONTROL Wash Dry DESCRIPTION Make sure the water input tap is totally open and that eer peas water there is no water
13. Dishwasher Instruction Manual CONTENTS Technical specifications Conformity with the standards and Test data Safety information and RECOMMENAATIONS 111cccccecececcnennanennsnnsensnssssssssensensesees e 5 5 6 0 ea Pa ey ene one MNO enter rte Marten Thien Tener reneerin yy seerare seam ere aera et ye e Safety information e Recommendations e Items not suitable for dishwashing Installing the machine e Positioning the machine e Water connections 6 Water inlet hose Water outlet hose Electrical connection Fitting the machine undercounter Prior to using the machine Preparing the machine for use The importance of water decalcification Filling with salt Testing strip Adjusting salt consumption Detergent usage Filling the detergent compartment Combined detergent Filling with rinse aid and making the setting Loading your dishwasher e Dish rack e Alternative basket loads 00 cece cc cceeeeeeceeecccccccceceeeuuuaauuussettttssseeesceceeseseceeees Programme descriptions e Programme items Getting familiar with your machine Switching on the machine and Selecting a PrOQrarmIiMe 12111cececeecceececesesssenseseseesseees Switching on the machine Programme follow up Changing a programme Changing a programme with resetting Switching the machine off Maintenance and Cleaning Filters e Spray arms Hose filter Failure codes and what to do in case of failure Pr
14. actical and useful information aS Sy Worktop Upper basket with racks Upper spray arm Lower basket Lower spray arm Filters COON Oo j Rating plate Control Panel Detergent and rinse aid dispenser Cutlery basket Salt dispenser Upper basket track latch 13 Active Drying Unit This system provides better drying performance for your dishes Technical specifications Drain Pump Power 30W 0 03 MPa 0 3 bar 1 MPa 10 bar Producer company has its right to amend design and technical specifications reserved The machine s service life is 10 years duration required to keep spare parts for the machine to ulfil its usage functions Conformity with the standards and Test data EC Declaration of Conformity All stages related to the machine are executed in accordance with the safety rules provided in all relevant directives of the European Community 2004 108 EC 2006 95 EC IEC 436 DIN 44990 EN 50242 Important Note for User For softcopy of this user manual please contact following address dishwasher standardtest info In your e mail please provide the model name and serial number 20 digits which you can find on the appliance door SAFETY INFORMATIONAND RECOMMENDATIONS Recycling e Certain components and the packaging of your machine have been produced from recyclable materials Plastic parts are marked with international abbreviations gt PE lt gt PS lt gt POM lt gt PP lt
15. ates dessert plates salad bowls cups and glasses When placing long stem glasses and goblets lean them against the basket edge rack or glass supporter wire and not against other items Do not lean long glasses against one another or they cannot remain steady and may receive damage It is more appropriate to locate the thin narrow parts into the middle sections of baskets You can place spoons among the other cutlery sets in order to prevent them from sticking to one another You are recommended to use the cutlery grid in order to obtain the best result To avoid any possible injuries always place such long handle and sharp pointed dishes as serving fork bread knife etc with their sharp points facing down or horizontally on the baskets Warning Place your dishes into your machine in a way that they will not prevent the upper and lower spray arms from spinning Dish rack There are dish racks on the upper basket of your machine H You can use these dish racks in open or closed position When they are in open position A you can place your cups on them and when in closed position i you can place long glasses on the basket Also you can use these racks by placing long forks knives and spoons on them laterally Top basket height adjustment Top basket of your machine is in upper position When it is in this position you can place big items such as pans etc on lower basket When you take top basket to lower position you can place
16. e aid salt various extra functions Generally combined detergents produce sufficient results under certain usage conditions only Such detergents contain rinse aid and or salt in preset amounts Points to consider when using this type of products Always make sure to check the specifications of the product you will use or whether or not it is a combined product Check if the detergent used is appropriate for the hardness of mains water that machine is appertaining to Observe the instructions on packagings when using such products If such detergents are in the form of tablets never put them into the interior section or the cutlery basket of the dishwasher Always put the tablets into the detergent compartment in the detergent dispenser They produce good results for certain types of usage only If you are using this type of detergents you need to contact the manufacturers and find out about the suitable conditions of use When the conditions of use of such products and the machine settings are appropriate they ensure savings in salt and or rinse aid consumption Contact the detergent manufacturers if you are not obtaining good wash results if your dishes stay calcareous and wet after having used 2 in 1 or 3 in 1 detergents The scope of warranty for your machine does not cover any complaints caused by the use of these types of detergents Recommended usage If you want to obtain better results while using combined detergents
17. ent electrician carry out an earthing installation In case of usage without earthing installed our company will not be responsible for any loss of usage that might occur The indoor fuse current value should be 10 16 A Your machine is set according to 220 240 V If the mains voltage in your location is 110 V connect a transformer of 110 220 V and 3000 W inbetween The machine should not be plugged in during positioning Always use the coated plug supplied with your machine Running in low voltage will cause a decline in washing quality The machine s electrical cable should be replaced by an authorised service or an authorised electrician only Failure to do so may lead to accidents For safety purposes always make sure to disconnect the plug when a wash programme is finished In order not to cause an electric shock do not unplug when your hands are wet When disconnecting your machine from the mains supply always pull from the plug Never pull the cord itself Fitting the machine undercounter If you wish to fit your machine undercounter check whether you have sufficient space under your countertop and whether the wiring plumbing is suitable to do so 1 If you decide that the space under the countertop is suitable for fitting your machine remove the worktop as shown in the illustration 2 Warning The stand part which we will settle our machine under it by removing its worktop has to be stable in such a way not to allow
18. into consideration that its connections will not be altered once they are made Do not grip the machine by its door or panel in order to move it Take care to leave a certain clearance from all sides of the machine so that you can comfortably move it back and forth during cleaning Make sure that the water inlet and outlet hoses do not get squeezed while positioning the machine Also make sure that the machine does not stand on the electrical cable Adjust the machine s adjustable feet so that it can stand level and balanced Proper positioning of the machine ensures problem free opening and closing of its door If the door of you machine does not close properly check if the machine is stable on the floor it stands if not adjust the adjustable feet and ensure its stable position Water connection Be sure that the indoor plumbing is suitable for installing a dishwasher Also we recommend that you fit a filter at the entrance of your place or apartment so as to avoid any damage to your machine because of any contamination sand clay rust etc that might be occasionally carried in through the mains water supply or the indoor plumbing and to forestall complaints as yellowing and formation of deposits after washing Water inlet hose Do not use the water inlet hose of your old machine if any Use the new water inlet hose supplied with your machine instead If you are going to connect a new or long unused water inlet
19. ions that harden the water accumulate rapidly inside the softener system Therefore the softener system has to be refreshed so that it operates with the same performance also during the next wash For this purpose dishwasher salt is used Filling with salt Use softener salt specifically produced for use in dishwashers To put softener salt first remove the lower basket and then open the salt compartment cap by turning it counter clockwise J 2 At first fill the compartment with 1kg salt and watergiat overflowing level If available using the funnel provided will make filling easier refit the cap and close it When salt absent indicator is lighten on app between 20th 30th cycles depend on the water hardness add salt into your machine until it fills up approx 1 kg Fill the salt compartment with water at first use only We recommend that you use small grained or powder softener salt Do not put table salt into your machine Otherwise the function of the softener compartment may _ decrease over time When you start your dishwasher the salt compartment gets filled with water Therefore put the softener salt prior to starting your machine This way overflowing salt gets immediately cleaned up through the wash operation If you are not going to wash any dishes immediately after putting salt then run a short washing program with an empty machine in order to avoid any damage to prevent corrosion to yo
20. lamp is off Wash Dry lamp is on a QO End lamp is off 23 3K The Start Pause lamp lamp is on O Wash Dry lamp is off End lamp is on 350 90 463 The Start Pause lamp lamp is on If the hardness of the water you use is above 90 dF French hardness or if you are using well water you are recommended to use filter and water refinement devices 5 11 NOTE Hardness level is adjusted to level 3 as a factory setting Adjusting salt consumption Adjust the water softener according to how hard your tap water is D Move the programme selector knob to the 0 Reset position while your machine is not in operation After resetting your machine press the Start Pause button and keep it pressed down Meanwhile energise the machine by pressing the Power On Off button P Keep Start Pause keys press until program monitor lights are on and off After the lamps Wash Dry End have flashed j release the Start Pause button You can adjust the levels by pressing the Start Pause button 4 according to Table of Water Hardness Level Settings After adjusting the water hardness level press on off button to save the settings in memory Detergent usage Use a detergent specifically designed for use in domestic dishwashers You can find powder gel and tablet detergents in the market that have been designed for household dishwashers Detergent should be put into the compartment prior to starting
21. ldren s safety e After removing the machine s packaging make sure that the packaging material is out of reach of children Do not allow children to play with or start the machine e Keep your children away from detergents and rinse aids e Keep children away from the machine while it is open because there may still be residues of cleaning substances inside the machine Be sure that old machine does not pose any threat to your children Children are known to have gotten themselves locked in old machines To forestall such a situation break your machine s door lock and tear off the electrical cables In case of malfunctioning e Any malfunction in the machine should be repaired definitely by qualified persons Any repair work performed by anyone other than the authorised service personnel will cause your machine to be left outside the scope of warranty e Prior to any repair work on the machine be sure that the machine is cut off from the mains Switch off the fuse or unplug the machine Do not pull by the cable when unplugging Make sure to turn off the water tap Recommendations e For energy and water saving remove coarse residues on your dishes before placing the dishes into the machine Start your machine after having fully loaded it e Use the pre wash programme only whenever necessary e Place such hollow items as bowls glasses and pots into the machine in such a way that they will face down e You are recommended not to
22. n The Power On Off button is released yet If detergent residues are left in the detergent compartment Detergent has been added when the detergent compartment was wet If water is left inside the machine at the end of the programme e The water drain hose is clogged or twisted e The filters are clogged e The programme is not finished yet If the machine stops during a wash operation Power failure e Water inlet failure e Program can be on standby mode If shaking and hitting noises are heard during a wash operation e Dishes placed incorrectly e Spray arm hitting the dishes If there are partial food wastes left on the dishes Dishes placed incorrectly into the machine sprayed water did not reach related places Basket overly loaded Dishes leaning against one another Very small amount of detergent added An unsuitable rather weak wash programme selected Spray arm clogged with food wastes Filters clogged Filters incorrectly fitted Water drain pump clogged If there are whitish stains on the dishes e Avery small amount of detergent is being used Rinse aid dosage setting at a very low level No special salt is being used despite the high degree of water hardness Water softener system setting is at a very low level Salt compartment cap not closed well If the dishes won t dry up e A programme without a dry operation selected e Rinse aid dosage set too low e Dishes unloaded too fast If the
23. re are rust stains on the dishes e Stainless steel quality of the dishes washed is insufficient High rate of salt in the wash water Salt compartment cap not closed well Too much salt spilt into the sides and into the machine while filling it with salt Unhealthy mains grounding Call an authorised service if the problem still persists after the controls or in case of any malfunction not described above PRACTICAL AND USEFUL INFORMATION Whenever you will not be operating your machine Unplug the machine and then turn the water off Leave the door slightly ajar in order to prevent the formation of unpleasant smells Keep the machine interior clean Eliminating water droplets Wash the dishes with the intensive programme Take all of the metal containers in the machine out Do not add detergent If you properly place your dishes into the machine you will be using it in the best way in terms of energy consumption washing and drying performance Clean all rough waste before you place dirty dishes to the machine Operate the machine after it is completely full Use pre washing program only when necessary Observe program information and average consumption values table when selecting a program Since the machine will reach high temperatures it should not be mounted near refrigerator If the appliance is located in a place where the risk of freezing exists you must completely drain the water that has remained in the machine Tu
24. rn off the water tap disconnect the water inlet hose from the tap and allow the interior water to drain 52169398 R20
25. shing program is continuing After the program stops select your desired program via the Program selection button Start the program you have newly selected by pressing again the Start Pause key Press once the Power Start Pause key Changing a programme with resetting If you would like to cancel a program while a washing program is resumed Press once the Power Start Pause key The machine will discharge the water in it for nearly 30 sec Press once the Power Start Pause key Switching the machine off Turn the Program Selection Button to Reset The program will have been cancelled once the drying lamp goes off and the lampFinshed is on Pull the plug out of the outlet Turn of the water tap When the lamp End lights up switch your machine off by using the Power On Off button Note You can slightly open the door in order for the machine to perform a faster dry operation after the wash programme is finished Note If the machine door opens during washing or the power is cut off the machine will go on to the program in case the door is shut or the power is back Note lf energy is cut or machine door is opened during drying process program is terminated Your machine becomes ready for new program selection MAINTENANCE AND CLEANING Cleaning the machine in regular intervals prolongs the machine s service life Oil and lime may accumulate in the machine s washing section In case of
26. such accumulation Fill the detergent compartment without loading any dishes into the machine select a programme that runs at high temperature and start the machine In case of insufficiency use special cleansing material available in the market Cleansing material produced special to machines by detergent producers Cleaning the seals in the machine door To clean any accumulated residues in the door seals wipe the seals regularly by using a dampened cloth Cleaning machine Clean the filters and spray arms at least once a month Unplug your machine and turn off its tap before starting the cleaning Do not use hard materials when cleaning your machine Wipe with a fine cleaning material and a dampened cloth Filters Check if any food wastes have remained on the coarse and fine filters If any food wastes are left remove the filters and clean them thoroughly under the water tap a Micro Filter b Coarse Filter c Metal Plastic Filter To remove and clean the filter combination turn it counter clockwise and take it out by lifting uowards J Pull and remove the metal plastic filter Then pull the coarse filter out of the micro filter Rinse it with lots of water under the tap Refit the metal plastic filter Insert the coarse filter into the micro filter in a way that the marks will correspond to one another Attach micro filter into the metal plastic filter and turn to the direction of arrow and it is locked
27. tion liters If you choose half load option values change into Programme duration min Electricity consumption kW hours Water consumption liters Warning Short programs do not include a drying step The values declared above are the values obtained under laboratory conditions according to relevant standards These values can change depending on conditions of product s use and environment network tension water pressure water input temperature and environment temperature GETTING FAMILIAR WITH YOUR MACHINE 34 1 Power On Off Button When the power on off button is pressed the lamp on the Start Pause starts lighting 2 Door Handle The door handle is used to open close the door of your machine 3 Half Load Option By using the half load feature of your dishwasher you can reduce the duration of your selected programs and decrease your power and water consumption by using less electricity and water 4 Start Pause Button Once you press the Start Pause button the programme you selected with the programme selector button will start running and the status indicator lamp wash Dry will light up In the stop condition while wash led is On Start Pause led will blink 5 Programme Selector Knob With the programme selector knob you can select a suitable programme for your dishes 6 Wash Dry End of cycle indicator You can monitor the programme status with the
28. until the rinse aid level indicator becomes dark refit the cap and close it by turning it in a way that the nails will correspond to one another By checking the rinse aid level indicator on the detergent dispenser you can understand whether or not your machine needs rinse aid A dark indicator i means that there is rinse aid in the compartment while a light indicator shows that you need to fill the compartment with rinse aid The rinse aid level adjuster can be set to a position between 1 and 6 Factory setting for rinse aid is the position 3 You need to increase the degree of the adjuster if water stains form on your dishes after a wash whereas you need to decrease the degree if a blue stain is left when wiped by hand Warning Use only those rinse aid materials which are allowed for use in the machine As rinse aid residues left as a result of overflowing will create extremely high amounts of foam and thus reduce the washing performance remove the excess amount of rinse aid by wiping it with a rag LOADING YOUR DISHWASHER If you properly place your dishes into the machine you will be using it in the best way in terms of energy consumption washing and drying performance There are two separate baskets for you to load your dishes into your machine You can load into the lower basket such round and deep items as pots with long handles pot lids plates salad plates cutlery sets The upper basket has been designed for tea pl
29. ur machine due to the salt overflow while filling in the salt container Testing strip The washing effectiveness of your machine depends on the softness of the tap water For this reason your machine is equipped with a system that reduces the hardness in mains water supply The washing effectiveness will increase when the system is correctly set To find out the water hardness level of water in your area contact your local water board or determine water hardness level by using the test strip if available Open the Run Keep the Shake the Wait for Make your machine s water hardness testing water testing testing strip 1 min setting according to the result obtained strip through strip in after taking it through the testing strip your tap water for 1 out of water Level 1 Mo Lime Level 2 Very kow lime content Level 3 Lowy lire content is 7 Level 4 Medium lime conbent 1 minute Levels Lime cantent Level 6 High lime content Adjusting salt consumption Table of Water Hardness Level Settings German French British Hardness Level Indicator hardness hardness hardness dF Wash Dry lamp is on O End lamp is off O The Start Pause lamp lamp is off dH O Wash Dry lamp is off End lamp is on O The Start Pause lamp lamp is off Wash Dry lamp is off End lamp is off 12 17 31 30 The Start Pause lamp lamp is on Wash Dry lamp is on a End lamp is on 18 22 O The Start Pause lamp
Download Pdf Manuals
Related Search