Gig Rig CompACT 10 Sub/Sat Speaker System
Contents
1. d c gt d c d c gt d c d c d c d 7 c gt c 7 C H O CH O c H H GND LIFT D o audio me E Gig Rig CompACT 10 O Sub Sat Speaker System Kai O TT 14 FUSE AT3 15A 250V CECR CAUTION D AFA G5 E DO NOT OPEN CAUTION To PREVENT ELECTRIC SHOCK DO NOT REMOVE TOP OR BOTTOM COVERS NO USER SERVICABLE PARTS INSIDE MAINS INPUT WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK GEESS DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE O O O www prolight co uk Gig Rig CompACT 10 User Manual 6 audio Operating instructions Satellite speaker 1 8 Balanced outputs Stereo balanced line outputs suitable for linking to extra Sub Sat systems If using the system in mono the left output should be linked to the right input using a short balanced XLR XLR cable 2 7 Balanced inputs Stereo balanced line inputs suitable for input from a mixing console If using the system in mono only the left input should be used and the right output linked to the left input using a short balanced XLR XLR cable 3 6 Unbalanced inputs Stereo line level input via 6 35mm jack 4 Power LED This LED illuminates when the unit is switched on 5 Subwoofer level control Level volume control for the subwoofer amplifier allowing the balance between bass and mid high to be adjusted 9 Satellite output Speaker level signal output for connecting the right satellite m2. The carrying capacity of the distance tube must never be exceeded When choosing the installation location please make sure no person can enter the area below the system Make sure that the respective area is blocked An unintended movement of the load has to be avoided also in case of fire The system must never be moved before the top speaker has been removed Overhead Installation If the speaker system is to be installed with a mounting height of more than 1m e g on a stage or framework the speaker system must always be secured with an appropriate secondary securing attachment The installation must always be secured with a secondary safety attachment e g an appropriate catch net The secondary safety attachment must be constructed in a way that no part of the installation can fall down if the main attachment fails When rigging derigging or servicing the speaker system standing in the area below the installation place on bridges or other endangered areas are forbidden The operator has to make sure that the safety data is approved by an expert before operation for the first time and after any changes are made The operator has to make sure that the safety data is approved by an expert after every four years in the course of an acceptance test The operator has to make sure that the safety installation data is approved by a skilled person once a year Procedure The speaker system should be insta
3. SpeakON sockets please ensure they are fitted the correctly See page 9 Connect your audio input source to the audio input sockets on the sub using either XLR or jack plugs Remember Left to left and right to right e Turn on the mains power switch and the mains LED will illuminate e Supply the subwoofer unit with an audio signal E g Audio from a mixer or CD line level source e Turn volume controls clockwise on the satellites until the desired volume level is achieved e Turn the subwoofer volume control clockwise until the desired bass level is achieved e IMPORTANT DO NOT OVERDRIVE THE SYSTEM If any distortion or clipping is audible you must reduce the input signal level or reduce the volume of the satellite speakers and bass Failure to do so will cause damage to the amplifier and or speakers Ground selector This switch is for separating the ground of the amplifier from the chassis and may assist with the removal of audio hum Connecting a mixer to the system See diagram below for how to connect the speaker system to a mixer www prolight co uk Gig Rig CompACT 10 User Manual 8 0 audio Balanced XLR Connection Connection With The Mains Balanced Used With XLR Connection 1 Ground shield 2 Hot 3 Cold 3 SDI For unbalanced pin 1 and pin 3 have to be bridged Operating instructions Connect the unit t
4. accept liability for any resulting damages caused by the non observance of this manual or any unauthorised modification to the equipment e Never let the power cable come into contact with other Make sure that the power cable is never crimped cables Handle the power cable and all mains voltage or damaged Check the equipment and the power connections with caution cable periodically e Never remove warning or informative labels from the e If the equipment is dropped or damaged disconnect equipment the mains power supply immediately Have a qualified e Do not open or modify the equipment engineer inspect the equipment before operating again If the equipment has been exposed to drastic temperature fluctuation e g after transportation do not switch it on immediately The arising condensation might damage the equipment Leave the equipment switched off until it has reached room temperature Do not connect this equipment to a dimmer pack Do not switch the equipment on and off in short intervals as this will reduce the system s life e Only use the equipment indoors Do not expose to flammable sources liquids or gases If the product fails to function correctly discontinue use Always disconnect the power from the mains when immediately Pack securely preferably in the original equipment is not in use or before cleaning Only handle packing material and return to your dealer for service the power cable by the plug Ne
5. 00W Max calculated SPL 110dB 123dB Please note Speaker Efficiency 1W 1M 90dB 90dB stands are NOT included Frequency response 90Hz 20kHz 45Hz 150Hz LF transducer 1 x 6 5 with 1 5 voice coil 10 with 2 voice coil HF transducer 1x 1 silk dome Nominal impedance 80 40 Connections 2 x Locking speaker Locking speaker connector connector XLR male amp female and 6 35mm 1 4 jack Dimensions HxWxD 346 x 225 x 215mm 429 x 340 x 460mm In the box 2 x satellite speakers Weight 6 4kg 25 6kg 1 x Subwoofer 2 x speaker cables Gig Rig CompACT 10 Speaker System order code SPEA44 1x power cable amp 1 x user manual Satellite speaker dimensions Subwoofer dimensions 340mm 460mm 225mm 215mm 346mm 429mm Waas E T www prolight co uk Gig Rig CompACT 10 User Manual 5 audio Technical specifications Satellite speaker Waas Gig Rig CompACT 10 Sub Sat Speaker System Power 150W Impedance 80 Subwoofer POWER N SUBWOGFER H pi SPEAKER CONNECTION SPEAKER CONNECTION c gt d O O c d O amp d d c d c gt c ds d c gt C D c c d c d c gt d c gt C p d c gt C d d C d c ds gt c C d C gt gt c gt d c la d c d c gt
6. LLING SPEAKERS SYSTEMS THE SUBWOOFER MUST NEVER BE SUSPENDED THE MID HIGH SPEAKER MUST ONLY BE SUSPENDED BY EXPERIENCED AND TRAINED PERSONS The top speaker system can be installed on top of a subwoofer satellite system on a Speaker stand or an appropriate wall mounting The carrying capacity of the extension pole the speaker stand or wall mounting bracket must never be exceeded www prolight co uk Gig Rig CompACT 10 User Manual 4 ao Pr verview audid oduct overvie Gig Rig CompACT 10 Sub Sat Speaker System W Audio s latest combined speaker and amp technology is a compact all in one system From smooth background ambience to a big noise for rock the house party time the Gig Rig ComACT 10 does it all High quality speakers sporting powerful magnets conjure a uniform sound that remains amazingly smooth from low to high volume levels The power amps produce an impressive 400Wrms they drive the Gig Rig ComACT 10 to deliver high impact audio e Subwoofer and mid high level controls e Ground lift switch g Ki Locking speaker sockets e Balanced XLR Unbalanced 6 35mm 1 jack inputs e Balanced XLR signal link outputs e 35mm top hat for optional pole mounting on both satellite soeakers and subwoofer e Durable hardwearing finish Specifications Satellite speakers each Subwoofer Continuous power 75Wrms 250Wrms Peak power 150W 5
7. Woas Gig Rig CompACT 10 Sub Sat Speaker System User Manual Order code SPEA44 audio Safety advice WARNING FOR YOUR OWN SAFETY PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START UP Immediately upon receiving this product carefully unpack the carton and check the contents to ensure that all the parts are present DANGER TO LIFE Before initial start up please make sure that there is no damage caused during transportation BEFORE OPERATING THE SPEAKER FOR THE FIRST TIME THE INSTALLATION Retain the carton and all packaging materials HAS TO BE APPROVED BY AN EXPERT Should there be any damage consult your dealer and do not use the equipment In the event that the equipment must be returned to the supplier it is important that the equipment is returned in the original carton and packaging To maintain the equipment in good working condition and to ensure safe operation it is necessary for the user to follow the safety instructions and warning notes written in this manual Please note that damages caused by user modifications to this equipment are not subject to warranty KEEP THIS EQUIPMENT TAKE CARE USING AWAY FROM MOISTURE THIS EQUIPMENT HIGH VOLTAGE RISK OF ELECTRIC SHOCK RAIN AND LIQUIDS AND OUT OF DAMP HUMID ENVIRONMENTS IMPORTANT The manufacturer will not
8. area and carefully turn it onto its feet Make sure that the power switch is set to OFF before you connect the speakers Inputs This speaker system is to be directly connected to the line outputs of your audio mixer or keyboard etc A good quality cable run improves the sound quality considerably Input cables should be short and direct since high frequencies may be absorbed if the cables are unnecessarily long Also a longer cable may lead to hum or noise problems If long cables runs are unavoidable you should use balanced cables In order to obtain the highest sound quality only use high quality cables for connecting the units The system can be connected via phono sockets or XLR plugs for line level inputs and via balanced XLR jack sockets for microphone level inputs Always connect the left and right channels for stereo operation For mono operation connect the mono signal to the left input Connect the left output socket via a short XLR cable to the right input www prolight co uk Gig Rig CompACT 10 User Manual 7 audio Operating instructions Connection e Before connecting the speakers and audio source to this device make sure that all volume gain controls are turned fully anti clockwise in the minimum position e Using the SpeakON cables supplied connect the left output socket from the subwoofer to the SpeakON input socket of the left satellite speaker Then do the same for the right When inserting SpeakON plugs into the
9. ase note that all soeaker systems weighing more than 25kg must be transported by two persons DANGER TO LIFE A FALLING SPEAKER SYSTEM CAN CAUSE DEADLY ACCIDENTS ALL SAFETY INSTRUCTIONS GIVEN IN THIS MANUAL IMPACT HAZARD MUST BE OBSERVED SECONDARY ATTACHMENT REQUIRED FOR OVERHEAD INSTALLATION DANGER TO LIFE DUE CAUTION FIRE HAZARD TO FALLING SPEAKER KEEP AWAY FROM CIGARETTES SYSTEMS FIRE AND HEATERS ETC TREAT THE SURFACE WITH A FIRE RETARDANT AT REGULAR INTERVALS LOUD NOISE HAZARD EAR PROTECTION MUST BE WORN Please note that speaker systems can move due to bass beats and vibrations Furthermore unintended pushing on the speakers present a further risk The speaker system must always be secured against moving or the respective area has to be blocked www prolight co uk Gig Rig CompACT 10 User Manual 3 audio Safety advice The given maximum power of the speaker system describes short term peaks the system can handle as a maximum The corresponding RMS power is as of all comparable systems also from other manufactures significantly lower The maximum power of the speaker system must never be exceeded When operating the speaker system please make sure that the system always sounds clear When distortion can be heard either the amplifier or the loud speaker is being overdriven Overloads can quickly lead to amplifier or speaker damage In order to avoid damage please reduce the volume immediately when di
10. ghten the fixing screws of the legs Installation Of The Speaker System CAUTION The loads have to be installed in a balanced way CAUTION The carrying capacity of the stand or speaker stand must never be exceeded Please note Speaker stands are NOT included Wall Installation The speaker system can only be installed on a wall if the original speaker system is equipped with an appropriate mounting point Before attaching the speaker system make sure that the installation area can hold a minimum point load of 10 times the installations weight E g 13kg 130kg point load The durability of the installation depends very much on the material used at the installation area building material such as wood concrete and brick etc This is why the fixing material must be chosen to suit the wall material Always ask a specialist for the correct plug screw combination indicating the maximum load and building material Note Wall bracket s not included Please note Wall bracket s are NOT included www prolight co uk Gig Rig CompACT 10 User Manual 10 audio Installation instructions Satellite System The satellite system must always provide enough stability The subwoofer s base surface must always be sufficiently dimensioned in relation to the top speaker in order to prevent tilting over The subwoofer and the top speaker must only be connected via an appropriate extension pole and stand adaptor
11. id high speaker Minimum output impedance 80 10 11 Mid High volume Level volume control for the left right satellite loudspeakers Turn dial to zero before powering system on off 12 Satellite output Speaker level signal output for connecting the left satellite mid high speaker Minimum output impedance 80 13 Ground lift switch During normal operation the switch should be in the GND position Should the system suffer from a low frequency 50 60Hz hum the switch can be moved to the lift position This will disconnect the signal ground from the chassis Do not attempt to remove the protective earth from the incoming mains connection 14 On Off switch Mains power on off for the system Connections for signal input and speaker outputs must be made before powering on the system 15 Mains fuse Should the unit fail to power on remove the mains cord and check the fuse Replace only with T 3 15A 250V type 16 IEC mains inlet Connect the system to the mains using the supplied 13A BS1363 IEC power cord Care should be taken to ensure the mains outlet voltage is AC 240V 50Hz 17 Ventilation holes The system utilises a forced air system to keep the system cool while running under demanding systems All ventilation slots must be kept clear of obstruction and cleaned on regular occasions 18 Satellite input Satellite input socket for speaker level signal input from the subwoofer Start Up Place the subwoofer to the desired installation
12. lled outside areas where persons may walk by or seated www prolight co uk Gig Rig CompACT 10 User Manual 11 audio Installation instructions amp WEEE notice IMPORTANT OVER HEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE including but not limited to calculating working limits installation materials used and periodic safety inspection of all installation materials and the speaker system If you lack these qualifications do not attempt the installation yourself but instead use a professional structural rigger Improper installation can result in bodily injury and damage to your property The speaker system has to be installed out of the reach of people CAUTION Speaker systems in overhead installations may cause severe injuries when falling If you have doubts concerning the safety of a possible installation do not install the speaker system Before rigging make sure that the installation area can hold a minimum point load of 10 times the speaker systems weight Replacing The Fuse CAUTION Before replacing the fuse please make sure that mains cable is unplugged Procedure Step 1 Unscrew the fuse holder and the rear panel with a screw driver anti clockwise Step 2 Remove the old fuse from the fuse holder Step 3 Install a new fuse of the same type and rating Step 4 Replace the fuse holder in the housing and fix it Correct Disposal of this Product Waste Electrical amp Electronic Equipment Applicable in the European U
13. nion and other European countries aa with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal CE f www prolight co uk Gig Rig CompACT 10 User Manual 12
14. o the mains via the IEC mains inlet using the 13A UK IEC cord supplied The protective earth must be connected do not attempt to remove or tamper with the mains earth connection Switch the unit on After switching on the speaker system wait 8 10 seconds before you turn the volume control up in order to avoid speaker damage CAUTION Increase the level of each channel up to the point where the clip LEDs illuminate Always check the sound pressure level with a meter in order to keep to the legal threshold Jack plug Unbalanced mono 1 4 jack plugs Balanced stereo 1 4 jack plugs Strain relief i Sleeve clamp Signal Ground shield Sleeve Tip Hot Connections _ _ Ring Tip Cold Strain relief Sleeve Ground shield For connection of balanced and unbalanced plugs the ring and sleeve have to be bridged in the stereo plug This speaker system is equipped with 4 pole locking speaker sockets For locking the connection turn the plug to the right For unlocking pull the unlock button and turn the plug to the left and pull it out of the socket Speaker socket Installing the speaker cables PUSH UNLOCK Connect the satellite speakers to the left and right satellite sockets The signal will be transmitted to the individual speakers Always treat the cables carefully and protect them from damage during transportation Always install the cables in a structured way and pr
15. otect them from damage The cables must be installed in a way that no person can trip over them Always fix the cables with an appropriate tape etc www prolight co uk Gig Rig CompACT 10 User Manual 9 audio Installation instructions Installation on a Speaker Stand The speaker system may only be installed on a speaker stand if the original speaker system is equipped with an appropriate stand adaptor Stands or satellite systems must only be installed on a plane area with a maximum inclination angle of 5 CAUTION Speaker systems installed under the influence of horizontal forces e g wind can be impaired This is why additional safety measures like attaching ballast weights have to be taken If inclined tension cables or prolonged outriggers are used the area of danger has to marked or blocked Before lifting or lowering the telescopic tubes you must always block a safety area around the stand or satellite system This safety area must have a diameter of 1 5 times the maximum height Lifted telescopic tubes always have to be secured with a secondary securing attachment The total weight of the installation total weight of system including individual parts must never exceed the maximum load of the installation area Unintended movement of the load has to be avoided also in case of fire Loosen the fixing screws of the legs pull the legs out until the cross struts are at a 90 angle to the legs Ti
16. stortion can be heard When speaker systems are damaged by overdriving the guarantee becomes void e The ambient temperature must always be between 5 Cand 45 C Keep away from direct sunlight particularly in cars and from heaters e The relative humidity must not exceed 50 with an ambient temperature of 45 C e This speaker system must only be installed at a solid horizontal anti slip vibration and oscillation free fire resistant location e Please note When using this speaker system in public or industrial areas a series of safety instructions have to be followed that this manual can only give in part The operator must therefore inform himself on the current safety regulations e Before installing the system make sure that the installation area can hold a minimum point load of 5 times the systems weight e g weight 20kg point load 100kg e The speaker system must never be installed higher than 100cm with out a secondary attachment e For over head installations mounting height gt 100cm always fix the speaker system with an appropriate safety cable e The installation area of the speaker system has to be built and constructed in a way that it can hold 10 times the weight of the speaker for 1 hour without any deformation e The installation area of the speaker system has to be built and constructed in a way that it can hold 10 times the weight of the speaker for 1 hour without any deformation DANGER TO LIFE DUE TO FA
17. ver pull out the plug by pulling the power cable Only use fuses of same type and rating Repairs servicing and power connection must only be Make sure that the available voltage carried out by a qualified technician THIS UNIT CONTAINS is between 220V 240V NO USER SERVICEABLE PARTS WARRANTY One year from date of purchase OPERATING DETERMINATIONS If this equipment is operated in any other way than those described in this manual the product may suffer damage and the warranty becomes void Incorrect operation may lead to danger e g short circuit burns and electric shocks etc Incase of malfunction this system should be returned for service or inspection Do not endanger your own safety and the safety of others Incorrect installation or use can cause serious damage to people and or property www prolight co uk Gig Rig CompACT 10 User Manual 2 audio Safety advice Safe installation Make sure that the area below the installation place is blocked when rigging derigging or servicing the system Please note W Audio cannot be made liable for damages caused by incorrect installations and excessive noise levels Unpacking and transportation Unpack the units and examine them for transport damage When boxed in the original packaging the speaker system should be carried by two persons of the same size Carrying the speaker system with one person alone should be avoided as the heavy weight and strain could lead to back injury Ple
Download Pdf Manuals
Related Search