User manual - Autec-VLT Automotive Equipment
Contents
1. Fig 6 AUTEC VLT Automotive Equipment Autec Hefbruggen bv Industrieterrein Montfoort Vlasakker 11 3417 XT MONTFOORT U The Netherlands Tel 31 348 477000 Fax 31 348 475104 Internet www autec vlt nl E mail info autec vlt nl USER INSTALLATION MANUAL ASM 0502H ASM 0703H ASM 0703H 0704H 0705H LIFTING CAPACITY Lifting time Descending time 700 kg Motocycle lifts lifting tables U ASM 0704H ASM 0705H ISSUED 27 2 2012 Drauf sich Boven aar 2225 500 c T cet Total weight i amp E i Worktemperature L Working environment Ei 3 Te s ms Dimensions U 3 2 AS ASM 0703H x gt Dimensions Sur ASM 0704H 535 Dimensions ASM 0705H Side view Seiten ansicht DRIVE Zij aanzicht ELECTRICMOTOR PUMPUNIT SZ 0 75 KW p w Voltage 230V 1 Ph 10 lt 4 ss C4 X N 230V 6 A iu E 2780 rpm Mi cht 30 aanzicht T Peed ie m 2000 500 i J E i In pro 1 CO oO _ D 0 e era _ Y 535 _ vie DRIVE DIRECTION n sich t J aanz i k A p d Vd E ME E s az qu DECR2. Every action involving the operation trained personnel who have a proper knowledge of the lift and who are familiar with the contents of this operating manual must only do transportation or unpacking of the equipment LIFTING AND MOVING THE PACKING The wooden crates must be lifted and moved with the help of a fork lift truck or a lift crane Fig 1 The equipment chosen must be capable of lifting and moving the equipment safely keeping in mind the dimensions of the vehicle the weight the centre of gravity and projecting and fragile parts STORAGE The packed lift must always the placed in a covered area at a temperature between 10 and 40 and must not be exposed to direct sunlight OPENING THE CRATES Check whether the machine have been damaged during transportation and whether all the components as mentioned in the packing list are physically present AUTEC VLT Automotive Equipment Autec Hefbruggen bv Industrieterrein Montfoort Vlasakker 11 3417 XT MONTFOORT U The Netherlands Tel 31 348 477000 Fax 31 348 475104 Internet www autec vlt nl E mail info autec vlt nl USER INSTALLATION Motocycle lifts lifting tables MANUAL ASM 0502H ASM 0703H ASM 0704H ASM 0705H ISSUED 27 2 2012 4 DESCRIPTION OF THE LIFT Fig 2 The electric hydraulic lift model ASM 0502H 0703H 0704H 0705H are based on the ground and is designed and manufactured for lifting motorbikes or lawnmower and hol
3. The following terms have been used in this manual to describe the various types of risk D DANGER there is a direct possibility of danger which could lead to serious injury or death Aaa StoP WARNING this indicates situations and or actions which are unsafe and could lead to injuries of various types except death CAUTION this indicates situations and or actions which are unsafe and could lead to light injuries to persons and or damage to the lift the vehicle or other properties RISK OF DAMAGE DUE TO ELECTRICITY Special safety arrangements have been made on the lift in places where the risks are very high RISKS AND PROTECTIVE MEDIA The risks to which the operator is exposed when the vehicle is in a raised position together with the protective media which have been installed in order to limit the possible dangers WARNING Do not move the vehicle when it is on the platform The platforms and the rubber fittings should only be removed at the lowest liftin osition and when there is no load A N NN N It is extremely important that the vehicle is placed on the lift in such a manner that there is a uniform distribution of weight over the platform For the safety of the persons and material be ensured that The safetyzone is observed during lifting and descending SAFETY DEVICES The following safety devices are mounted to prevent damage or injuries BI Safety pressure valve protects against excessive pressure
4. USER INSTALLATION Motocycle lifts lifting tables T Vehicle lifts MANUAL CC E Hefbruggen ASM 0502H ASM 0703H ASM 0704H ASM 0705H ISSUED 27 2 2012 e Motorcycle lifts lifting tables AUTEC VLT Automotive Equipment Autec Hefbruggen bv Industrieterrein Montfoort Vlasakker 11 3417 XT MONTFOORT U The Netherlands Tel 31 348 477000 Fax 31 348 475104 Internet www autec vlt nl E mail info autec vlt nl USER INSTALLATION Motocycle lifts lifting tables MANUAL ASM 0502H ASM 0703H ASM 0704H ASM 0705H ISSUED 27 2 2012 DECLARATION OF WARRANTY AND LIMITATION OF LIABILITY The manufacturer has paid proper attention to the preparation of this manual However nothing contained herein modifies or alters in any way the terms and conditions of manufacturer agreement by which this lift was acquired nor increases in any way the manufacture s liability to the customer TO THE READER Every effort has been made to ensure that the information contained in this manual is correct complete and up to date The manufacturer is not liable for any mistakes made when drawing up this manual and reserves the right to make any changes due the development of the product at any time February 2012 Industrieterrein Montfoort Vlasakker 11 3417 XT MONTFOORT U The Netherlands Tel 31 348 477000 Fax 31 348 475104 Internet www autec vlt nl E mail info autec vlt nl C AUTEC VLT Auto
5. m Mechanical locking prevents descending in case of hose fracture Thermal safety devices protect the motor in case of overload B Awheelclamp stabilises the motorbike during maintenance of the motorbike Industrieterrein Montfoort Vlasakker 11 3417 XT MONTFOORT U The Netherlands Tel 31 348 477000 Fax 31 348 475104 Internet www autec vlt nl E mail info autec vlt nl C AUTEC VLT Automotive Equipment Autec Hefbruggen bv USER INSTALLATION Motocycle lifts lifting tables MANUAL ASM 0502H ASM 0703H ASM 0704H ASM 0705H ISSUED 27 2 2012 RISKS TO PERSONS This paragraph describes the risks to which the operator or any other person near the working area where the lift is in operation in case the lift is not used in the appropriate manner Never rest any fittings or other objects against the platform and never place such objects under the platform when it has a load mounted on it since this can impede the lowering operations and may cause the vehicle to fall off the platform RISKS RELATED TO INAPPROPRIATE LIGHTING The operator and the maintenance fitter must be able to assure that all the areas of the lift are properly and uniformly illuminated in compliance with the laws in force in the place of installation RISK OF COMPONENT FAILURE DURING OPERATION Autec has used appropriate materials and construction techniques in relation to the specified use of the machine in order to manufacture a reliable and
6. lt PO uet SR A p B uu Fa DEDE s s RN ALD ci on L 9350 AUTEC VLT Automotive Equipment Autec Hefbruggen bv Industrieterrein Montfoort Vlasakker 11 3417 XT MONTFOORT U The Netherlands Tel 31 348 477000 Fax 31 348 475104 Internet www autec vlt nl E mail info Q autec vlt nl USER INSTALLATION Motocycle lifts lifting tables MANUAL SSS THE WEIGHT OF THE VEHICLE The lift can be used for practically all vehicles provided that the maximum loading capacity is not exceeded The safety zone Fig 10 is to some extending determined by the dimensions of the vehicle to be lifted Fig 9 6 SAFETY It is important to read point number 5 of this manual properly since it contains important information about the risks which the operator of the lift will be exposed to if the lift is not used properly In what follows you will find information about how to avoid dangerous situations AB WARNING STOP The lift is designed and constructed to lift vehicles and to hold them in a certain position in a covered working place Any other form of use is not permitted In short the lift is not suitable for the following purposes Washing and spraying work used as a device for applying force Tobe used as a goods lift The manufacturer hereby refuses to entertain any claims for damages arising in connection with injury to persons or da
7. safe lift Note however that the lift must be used in conformity with manufactures prescriptions and the frequency of inspections and maintenance work RISK OF ELECTROCUTION Never spray water or steam or solvents or paint in the area immediately surrounding the platform and the control cabinet RISK OF SLIDING OUT This risk can be overcome by avoiding the spillage of oil or grease in the area surrounding the lift Apart from that any oil spillage which may occur should be thoroughly removed from the spot P d 1 A MNT QE S Leu EST pute Fs f A3 Nis KEEP THE AREA UNDER AND AROUND THE LIFT CLEAN REMOVE ALL OIL SPILLS Industrieterrein Montfoort Vlasakker 11 3417 XT MONTFOORT U The Netherlands Tel 31 348 477000 Fax 31 348 475104 Internet www autec vlt nl E mail info autec vlt nl C AUTEC VLT Automotive Equipment Autec Hefbruggen bv USER INSTALLATION Motocycle lifts lifting tables MANUAL ASM 0502H ASM 0703H ASM 0704H ASM 0705H ISSUED 27 2 2012 PERSONNEL CRUSHING RISK When lowering runways and vehicles personnel must not be within the area covered by the lowering trajectory The operator must be sure no one is in danger before operating the lift AUTEC VLT Automotive Equipment Autec Hefbruggen bv Industrieterrein Montfoort Vlasakker
8. 0705H 11 CONFORMITY AUTEC Hefbruggen b v Vlasakker 11 NL 3417 XT Montfoort The Netherlands Declares the following lift models ASM 0502H ASM 0703H ASM 0704H ASM 0705H confirm to CE directives 89 392 EEC 91 368 EEC 93 44 EEC 93 68 EEC 91 368 89 336 73 23 CEE and EU directives EN 291 1992 EN 292 1992 EN 60204 Industrieterrein Montfoort Vlasakker 11 3417 XT MONTFOORT U The Netherlands Tel 31 348 477000 Fax 31 348 475104 Internet www autec vlt nl E mail info autec vlt nl C AUTEC VLT Automotive Equipment Autec Hefbruggen bv USER INSTALLATION Motocycle lifts lifting tables MANUAL lec ASM 0502H ASM 0703H ASM 0704H ASM 0705H ISSUED 27 2 2012 Powerunit Wiring skeleton Controlbox T w1 4A W Se MN NJ j Reference a CODE DESCRIPTION MAIN SWITCH 230 V SIGNAL LAMP 230V M MOTOR 230 1PH P1 P2 PUSH BUTTONS EV VALVE Powerunit Wiring skeleton CAPACITOR 30457 450 AUTEC VLT Automotive Equipment Autec Hefbruggen bv Industrieterrein Montfoort Vlasakker 11 3417 XT MONTFOORT U The Netherlands Tel 31 348 477000 Fax 31 348 475104 Internet www autec vlt nl E mail info 9 autec vlt nl
9. 11 3417 XT MONTFOORT U The Netherlands Tel 31 348 477000 Fax 31 348 475104 Internet www autec vlt nl E mail info autec vlt nl USER INSTALLATION Motocycle lifts lifting tables MANUAL ASM 0502H ASM 0703H ASM 0704H ASM 0705H ISSUED 27 2 2012 7 INSTALLATION The lift must be installed taking into account the dimensions of other objects and the minimum distance from the walls should be 500 mm Minimum working area of 500 mm Sufficient room for operations Sufficient room for carrying out maintenance as well as access and exit routes Position in relation to other machines The lift must be installed near a power supply point to enable problem free power connection LIFTING The lifts must be adequately and uniformly lighted FLOOR The lift must be installed on a horizontal flat and sufficiently sturdy floor with a minimum strength of 30N mm The lift should only be shifted or installed using suitable lifting equipment having the required capacity Method of working 1 Carefully remove the packing 2 Place the lift on the selected place of installation While doing this pay particular attention to the car uploading direction While moving the lift always grip it on the bottom surface of the base frame steps to prevent the entry of dirt into the hydraulic hose 4 Lift the vehicle uploading track to a height of about 800 mm with the help of lifting equipment Now
10. TEN BELTS PROPERLY AND CARRY OUT LIFTING MOTION AGAIN S MOTORCYCLE LIFTING WITHOUT SAFETY STRAPS IS STRICTLY FORBIDDEN Industrieterrein Montfoort Vlasakker 11 3417 XT MONTFOORT U The Netherlands Tel 31 348 477000 Fax 31 348 475104 Internet www autec vlt nl E mail info autec vlt nl C AUTEC VLT Automotive Equipment Autec Hefbruggen bv USER INSTALLATION Motocycle lifts lifting tables MANUAL ASM 0502H ASM 0703H ASM 0704H ASM 0705H ISSUED 27 2 2012 Fig 14 LIFTING Fig 14 Raise the lift by operating the foot pedal 1 Keep pumping the foot pedal until the locking cam has been pushed over the safety guard Now lower the lift into the interlock by operating the downward motion pedal LOWERING Fig 14 Lift the lift a little in order to release it from the lock Unlock the anti fallback interlock by hand Lower the lift by operating the pedal 2 1 Mainswitch key mainswitch to set power on your system 2 Voltage monitoring system A lamp where you can see if there is power on the system 3 Lowering button With this button you can lower the lift 4 Lifting button with this button you can lifting the lift LIFTING 1 Put the key mainswitch 1 in the on position 2 Place the button 4 in the lifting position and hold the button in this position until the desired position is reached 3 Now turn the button 3 in the interlocking position Hold the button in this positio
11. ding them in elevated position The main parts of the lift are welded base moving parts lifting parts lifting parts control part safety devices Fig 2 Fig 3 illustrates the parts making up the lift 1 Front the side across the drive on side 2 Rear the drive on side 1 2 1 1i DRMNGDRECIN Fig 3 CONTROLS Fig 4 5 The operation part of the lifts with the footpump contains 1 Liftpedal 2 Descend pedal Fig 4 AUTEC VLT Automotive Equipment Autec Hefbruggen bv Industrieterrein Montfoort Vlasakker 11 3417 XT MONTFOORT U The Netherlands Tel 31 348 477000 Fax 31 348 475104 Internet www autec vlt nl E mail info autec vlt nl USER INSTALLATION MANUAL ASM 0502H ASM 0703H The operating part of the lifts with the powerunit contains 1 Main switch 2 Descend lift button Nieuw The control part consists of the following Motocycle lifts lifting tables ASM 0704H ASM 0705H ISSUED 27 2 2012 Fig 5 Oiltank hydraulic pump electric motor a valve block and hydraulic hoses ASM 0502H LIFTING CAPACITY 500 kg Lifting time Descending time Total weight 195 Worktemperature 10 C 40 Working environment Dimensions ASM 0502H 5 TECHNICAL SPECIFICATION OD view Draufsicht Boven aanzicht 735 69 480 131 460 535
12. e the two side buildon pieces into the rail 21 Place the ramp by using the three washers and nuts of the de mounted wheelstop Extra installation information for the lifts BA A2 ASM5 The following parts must be mounted Two side buildon pieces 300 mm N 2 Raise the lift in a high level is easy to mount the parts iN 3 Slide the two side buildon pieces into the rail Industrieterrein Montfoort Vlasakker 11 3417 XT MONTFOORT U The Netherlands Tel 31 348 477000 Fax 31 348 475104 Internet www autec vlt nl E mail info autec vlt nl C AUTEC VLT Automotive Equipment Autec Hefbruggen bv USER INSTALLATION Motocycle lifts lifting tables 1 MANUAL ASM 0502H ASM 0703H ASM 0704H ASM 0705H one 8 OPERATION USE VEHICLE POSITIONING 1 Check whether the lift is in its lowest position 2 Move the motor cycle slowly and carefully onto the lift until the desired position is reach 3 Putthe motor cycle on its stand 4 Place the wheel lock and fix it firmly in place 5 Fixthe tensioning belts on the edge of the vehicle uploading plate and onto the motor cycle v CLAMPING IS MADE CORRECTLY ONLY IF THE HANDLEBAR IS HOOKED PROPERLY BY PREVENTING HOOKS FROM SLIDING FROM THE CLAMPING STRAPS BEFORE RAISING THE LIFT BE SURE THE STRAPS ARE FASTENED IF LIFTING MOTION HAS BEEN ALREADY CARRIED OUT AND THE MOTORCYCLE IS NOT PROPERLY ANCHORED LOWER THE LIFT FAS
13. l Tellus 32 Esso Nuto H32 Castrol HYSPIN HWS 32 Fina Hydran TS32 or a similar oil Industrieterrein Montfoort Vlasakker 11 3417 XT MONTFOORT U The Netherlands Tel 31 348 477000 Fax 31 348 475104 Internet www autec vlt nl E mail info autec vlt nl C AUTEC VLT Automotive Equipment Autec Hefbruggen bv USER INSTALLATION Motocycle lifts lifting tables MANUAL p ASM 0502H ASM 0703H ASM 0704H ASM 0705H ISSUED 27 2 2012 AIRING THE SYSTEM see fig 13 12 Open the airing valve on the cylinder to a small extent 13 Put the key mainswitch 1 in the on position 14 Now put button 2 in the lifting position Hold the button in this position until bubble free oil emerges from the valve 15 Again tighten the valve Raise the lift to its highest position and again release the airing valve and air the system until the oil comes out of the valve without any air Again close the valve tightly 16 Lower the lift 3 once again to its lowest position and check the level of oil in the oil tank If necessary top it up fig 13 Extra installation information for the lifts BA A2 ASM4 The following parts must be mounted wo side buildon pieces 150mm Ramp Wheelstop 17 Raise the lift in a high level is easy to mount the parts 18 De mount the wheelstop by loosen three bolts 19 Mount at the end sides the wheelstop bracket By using two bolts of the de mounted wheelstop 20 Slid
14. mage to vehicle or other property caused due to incorrect and or unauthorised use of the lift During lifting and lowering movements the operator must be within the zone of operation 1 as shown in Fig 9 The presence of any person in the safety zone 2 is strictly forbidden The presence of persons under the vehicle is only permitted if the vehicle is parked in the lifted position USE THE LIFT ONLY IF ALL THE SAFETY ARRANGEMENTS ARE WORKING PROPERLY IF THESE RULES ARE NOT FOLLOWED SERIOUS INJURY COULD BE CAUSED TO PERSONS AS WELL AS IRREPARABLE DAMAGE TO THE LIFT AND THE VEHICLE ON THE LIFT Industrieterrein Montfoort Vlasakker 11 3417 XT MONTFOORT U The Netherlands Tel 31 348 477000 Fax 31 348 475104 Internet www autec vlt nl E mail info autec vlt nl C AUTEC VLT Automotive Equipment Autec Hefbruggen bv USER INSTALLATION Motocycle lifts lifting tables MANUAL SSS ASM 0502H ASM 0703H ASM 0704H ASM 0705H GENERAL PRECAUTIONS The operator is bound to follow the regulations which apply in the country in which these lifts are installed In addition the operator must Always work in the operator area as designated in the Manual Never remove the protective guards or dismantle or shut down the mechanical electrical or other types of safety arrangements Read the safety regulations relating to the lift and take cognisance of the safety information provided in this manual
15. motive Equipment Autec Hefbruggen bv USER INSTALLATION Motocycle lifts lifting tables MANUAL Hj ASM 0502H ASM 0703H ASM 0704H ASM 0705H ISSUED 27 2 2012 CONTENTS 1 Introduction 03 2 Use of the manual 03 3 Packing transport storage 04 4 Description of the lift 05 5 Technical specification 06 6 Safety 09 7 Installation 12 8 Operation and use 15 9 Maintenance 17 10 Trouble shooting 18 11 Certificate of conformity 19 12 Electrical scheme 20 1 INTRODUCTION CAUTION This manual is intended for factory personnel who are going to operate or install the lift read the manual before you use the platform in any way or perform any actions on it This manual contains important information about the following points B THE PERSONAL SAFETY OF THE OPERATOR B PREVENT DAMAGE TO THE LIFTS B PREVENT DAMAGE TO THE VEHICLE 2 HOW TO USE THIS MANUAL The Manual forms part of the lift and must be available for reference in the immediate vicinity of the lift at all times The operator of the lift must be able to refer to the Manual quickly and at any given moment IT IS STRONGLY RECOMMENDED THAT YOU SHOULD FIRST CAREFULLY READ THE SAFETY INSTRUCTIONS The manufacturer hereby refuses to accept any responsibility for injury to persons or damage to equipment or property if it appears that incorrect handling of the lift has taken place This instruction manual only describes the operating and safety aspects which person
16. n until the lift falls into it s locking position Now release the button LOWERING Put the key mainswitch 1 in the on position Push the button 4 in the lifting position The lift must now be raised a little in order to be released from it s interlocked position When the lift has been lowered fully push button 3 in the lowering position Remove the tensioning belts and the wheel lock Thereafter take the motorcycle carefully off the lift S Industrieterrein Montfoort Vlasakker 11 3417 XT MONTFOORT U The Netherlands Tel 31 348 477000 Fax 31 348 475104 Internet www autec vlt nl E mail info autec vlt nl C AUTEC VLT Automotive Equipment Autec Hefbruggen bv USER INSTALLATION Motocycle lifts lifting tables MANUAL ASM 0502H ASM 0703H ASM 0704H ASM 0705H ISSUED 27 2 2012 9 MAINTENANCE wv ONLY TRAINED PERSONNEL WHO KNOW HOW THE LIFT WORKS MUST BE ALLOWED TO SERVICE THE LIFT To service properly the lift the following has to be carried out e only genuine spare parts as well as equipment suitable for the work required follow the scheduled maintenance and check periods shown in the manual Discover the reason for possible failures such as too much noise overheating oil blow by etc Refer to documents supplied by the dealer to carry out maintenance functional drawing of the electric and hydraulic equipment exploded views with all data necessary for spare par
17. place a piece of wood fig 10 between the scissors legs so as to prevent the lift from falling back WHEELSTOP E WOODEN BEAM 10x10x70 cm TRANSPORT Fig 10 5 De mount the wheelstop and mount it in the right position Use two spanners of 13 mm 6 Remount the footplate as show in fig 11 Nut A must be mounted a little loose so that brakeplate stay movable Nut B and C may be fastening Industrieterrein Montfoort Vlasakker 11 3417 XT MONTFOORT U The Netherlands Tel 31 348 477000 Fax 31 348 475104 Internet www autec vlt nl E mail info autec vlt nl C AUTEC VLT Automotive Equipment Autec Hefbruggen bv USER INSTALLATION Motocycle lifts lifting tables 2 MANUAL l Hefbruggen ASM 0502H ASM 0703H ASM 0704H ASM 0705H ISSUED 27 2 2012 ABC User gt gt Transport Fig 11 CONNECTING FOOT PUMP 7 Install the hydraulic hose on the foot pump 8 Fitthe other end of the hose on the cylinder of the lift 9 Replace the stopper plug of the foot pump with a plastic airing screw AIRING THE SYSTEM Raise and lower the lift a number of times using the lifting lowering motion buttons The lift will now get aired automatically CONNECTING PUMPUNIT 10 Connect the hydraulic hose to the valve block 11 Fill the oil tank with around 5 litres of hydraulic oil which must satisfy the requirements of ISO 6743 4 standards For example Texaco Rando 32 Shel
18. ricians Industrieterrein Montfoort Vlasakker 11 3417 XT MONTFOORT U The Netherlands Tel 31 348 477000 Fax 31 348 475104 Internet www autec vlt nl E mail info autec vlt nl C AUTEC VLT Automotive Equipment Autec Hefbruggen bv USER INSTALLATION MANUAL ASM 0502H ASM 0703H ASM 0705H Motocycle lifts lifting tables u ASM 0704H 10 TROUBLE SHOOTING lec lifts ISSUED 27 2 2012 Detection and repairs of faults if any should only be done subject to the condition that all the relevant SAFETY REGULATIONS as described are followed strictly v ALL RESETTING ACTIONS REPAIR TO THE SAFETY ARRANGEMENTS AND THE ELECTRICAL CONTROLLERS OF THE LIFTS SHOULD BE CARRIED OUT BY AUTHORISED PERSONNEL PROBLEMS The lift does not rise when the lifting button is pressed The lift does not rise The lift does not come down although the lowering button is pressed The lift goes down in jerks The lift keeps sliding back SPARE ORDERING REPAIR PROCEDURE To order the spare parts it is necessary to POSSIBLE REASONS The main switch is off The fuse is burnt out The lift is heavily overloaded The switch is not working Fault in the electrical system Too little hydraulic oil The suction pump is soiled The overpressure valve has not been properly adjusted The lift is heavily overloaded The voltage is too low Too little hydraulic oil The suction pump is soiled There is a foreign object under
19. s who are installing the machine need to know In order to understand the terminology used in this manual it is necessary that the person performing the installation work should have specific experience in industrial work service maintenance and repair activities and must also possess the ability to explain the drawings and the descriptions contained in this manual to other people At the same time he must also be aware of the general and specific safety regulations which apply in the country where the lift is being installed The word operator who has been used throughout this manual refers to a person who is authorised to use the platform The minimum legal age for using the lift is 18 years Industrieterrein Montfoort Vlasakker 11 3417 XT MONTFOORT U The Netherlands Tel 31 348 477000 Fax 31 348 475104 Internet www autec vlt nl E mail info autec vlt nl C AUTEC VLT Automotive Equipment Autec Hefbruggen bv lec lifts ASM 0502H ASM 0703H ASM 0704H ASM 0705H ISSUED 27 2 2012 USER INSTALLATION Motocycle lifts lifting tables MANUAL Main for all lifts p FQOTPUMP omms d om gt p Y 180 AA BA A2 ASM4 SIDE KIT 2X 300 mm RAMP je ASM 504F 20 200 ASM 704 pr LP BA A2JASM5 PUMPUNT Ty SETAMO E e c 007 07 E gt lt MMTOS WW 666 ASM 705 e Fig 1 3 PACKING TRANSPORT AND STORAGE
20. the lifting table Fault in electrical system The lowering motion button is dirty The lock is not unlocking The downward motion valve is not working properly There is air in the hydraulic system There is a leakage in hydraulic system The hydraulic cylinder is soiled The non return valve is leaking e indicate the lift serial number and the year of manufacturing For spare parts we refer to the TIB pages available on request C AUTEC VLT Automotive Equipment Autec Hefbruggen bv Industrieterrein Montfoort Vlasakker 11 3417 XT MONTFOORT U The Netherlands Tel 31 348 477000 Fax 31 348 475104 Internet www autec vlt nl REMEDIAL ACTION Switch on the main switch Replace the fuse Main the maximum weights according to the specifications Replace the switch and call Autec Call Autec for service Fill in hydraulic oil Clean the suction pump Set the over pressure valve Call Autec Maintain the maximum weight according to specifications Check the voltage Fill in hydraulic oil Clean the suction pump Remove the foreign object Call Autec for service Replace the lowering motion button Call Autec for service Call Autec for service Air the system Call Autec for service Call Autec for service Call Autec for service uni TE ASM E mail info autec vlt nl USER INSTALLATION Motocycle lifts lifting tables Vehicle lifts Hebeb l MANUAL gm ASM 0502H 0703 0704 ASM
21. ts ordering List of possible faults and relevant solutions Spray the guides for the sliding blocks on the underside of the vehicle uploading plate with teflonspray once every month Replace the hydraulic oil at least once every 5 years The lift has to be properly cleaned at least one a month Use self cleaning clothes S THE USE OF WATER OR INFLAMMABLE LIQUID IS STRICTLY FORBIDDEN Be sure the rod of the hydraulic cylinders is always clean and not damaged since this may result in leakage from seals and as a consequence in possible malfunctions Periodic maintenance Every 3 months Hydraulic circuit check oil tank level refill with oil if needed check the circuit for oil leakage Check seals for proper conditions and replaces them if necessary Foundation bolts check bolts for proper tightening Hydraulic pump verify that no noise changes take place in the pump of the control desk when running and check fixing bolts for proper tightening Safety system check safety devices for proper operation Every 6 months Oil Check oil for contamination or ageing Contaminated oil is the main reason for failure of valves and shorter life of gears pumps Every 12 months General check verify that all components and mechanisms are not damaged Electrical system a check of the electrical system to verify that control desk motor limit switches and control panel operate properly must be carried out by skilled elect
Download Pdf Manuals
Related Search