Home

Manual - OKINA USA

image

Contents

1. o sak D roro LL ie lt O O O Ove O OO Mera GND O 12V ACAV H H Lens Mount 00086 00 This mount is used to install a CS mount lens CS adaptor ring is required when using a C mount lens 2 Camera Mounting Screw Holes Screw holes for mounting the camera 3 Mount Adaptor The adaptor can be attached onto the top or the bottom of the unit Auto Iris Lens Connector 4 pin type The lens connector supplies the auto iris lens not supplied with DC control signal PIN NO VIDEO DC 1 DC 12V CONTROL 2 NC CONTROL 3 IRIS DRIVE 4 GND DRIVE OSD Control Buttons ENTER button UP amp DOWN buttons LEFT amp RIGHT buttons oa po Video Connector Video can be outputted via this connector 750 IRIS Mode Selection Switch Select DC or VIDEO mode according to the lens Video Connector Video can be outputted via this connector 750 Communication Connectors 1 RS485 2 RS485 3 Day amp Night External Input controlled by external infrared illuminator 4 Day amp Night Output 5 NC 6 Ground Power Input Indicator Light When the camera is connected to a power supply the indicator light will be on RS 485 Terminal Impedance Switch Set the first and the last equipment terminal impedances as 1200 and set the rest parallel connection equipment in the mi
2. 1 Please use the UP and DOWN buttons to EFFECT on the MAIN MENU and press ENTER button to enter 2 Please select the desired item and press LEFT and RIGHT buttons to adjust the settings 25 MOTION DETECTION Options are ON OFF Set to ON and click ENTER to bring up submenu for further settings MOTION DET DETECT SENSE IS BLOCK DISP ON DETECT AREA SET lt MONITOR AREA SET lt ALARM OUT OFF ALARM TIME RETURN lt Sub Menu under the MOTION DET mode DETECT SENSE Sensitivity can be set from 0 to 127 The higher the number the more sensible the camera can be BLOCK DISP Set the block display to ON OFF DETECT AREA Press SET to enter the sub menu and set the detect area MONITOR AREA Press SET to enter the sub menu and set the detect area ALARM OUT Only available to cameras with Communication Connectors Choose ON to output the alarm connect the alarm device to the ALO of the communication port on the rear panel so that the alarm can be output Be sure to turn off all the power before connecting 485 485 DNI DNO ALO lt Connect the ALARM terminal here GND 26 ALARM TIME Only available to cameras with Communication Connectors Alarm time can be set from 000 to 255 seconds PRIVACY MASK Options are ON OFF Set to ON and click ENTER to bring up submenu f
3. OFF Language ENGLISH TRADITIONAL CHINESE SIMPLIFIED CHINESE E Zoom x1 x256 Pan Tilt Adjustable Motion Detection Privacy ON OFF 24x16 Zones Alarm ON OFF 15 Zones Programmable Quadrangle Mosaic Camera Control Interface RS485 Interface OSD Control by Pelco D Pelco P Automatic IRIS Connector VIDEO DC D4 IRIS Jack Lens Mount CS C mount With Adaptor Ring Power Supply Consumption 12V DC 24V AC 10 8 39V DC 24V AC 2W Operation Storage Temp 14 F 122 F 10 C 50 C 4 F 140 F 20 C 60 C Operation Storage Humidity Maximum RH80 RH90 Dimensions LxWxH 4 72 x 2 44 x 2 2 inches 120 x 62 x 56 mm Net Weight 0 77 lbs 350g Specifications are subject to change without notice 2 CAMERA OVERVIEW 2 1 Dimensions 120 TJ Hiz RS485 3 e pb e 2 4 fa n O 1 4 UNC 4 pu U wu E VIDEO VIDEO1 O
4. Video Power RS485 to succeed a connection However via Balun 1 is sufficient The cameras OSD can be used and controlled remotely via RS485 communication port The most important thing is transmission can still stay clear and true Road Surveillance Monitoring Center Color 1000ft 300m Video Tr 7 B W 1600ft 500m PR Power L mm Ee a E E RJ45 RJ45 UTP 111VPD UTP 111VPD 7 UTP Balun UTP Balun Data Buge 4 11 Exit Select EXIT to automatically save the settings made and exit the MENU MAIN MENU LENS EXPOSURE WDR BLC FOG WHITE BALANCE 2DNR amp 3DNR DAY NIGHT IMAGE EFFECT SYSTEM EXIT lt 32 5 RELATED PRODUCTS 5 1 Recommended Lens 3 80mm IR D amp N Auto Iris 2 7 12mm IR D amp N Auto Iris 5 60mm Auto iris LENO380DCIR J e Made in Japan e 1 3 Aspherical e f3 80mm Vari focal e F0 95 e Auto Iris e Day amp Night e R corrected LEN2712DCIR J e Made in Japan e 1 3 Aspherical e f2 7 12mm Vari focal e F1 2 e Auto Iris e Day 8 Night e R corrected e CS mount 33 LENO560DC J Made in Japan 1 3 Aspherical f5 60mm Vari focal F1 6 Auto Iris Day amp Night CS mount 5 2 Recommended Housing amp Bracket 11 Hi Power IR LED Illuminator with Die Cast Aluminum Housing amp Bracket e 11 Super Power IR LED 6pc x 25 5pc x 45 e IR Distance up to 395ft 120m e IP66 Rating e User Adjustable IR LED Intensity VR e Factory Default
5. 511 horizontal zoomed in viewing and TILT 001 256 vertical zoom in viewing HLC High Light Compensation HLC MODE OFF CLIP LEVEL O SCALE O RETURN lt Sub Menu under the HLC mode 28 MODE Select to choose HLC mode from OFF ON and AUTO HLC function is not available when the WDR mode is selected under the WDR menu CLIP LEVEL Adjust the value of the HLC clip level from 000 to 255 SCALE Adjust the value of the HLC scale from 000 to 015 4 9 System MAIN MENU SYSTEM CAMERA TITLE OFF COMM SET lt SYNC INT LANGUAGE ENGLISH LENS EXPOSURE WDR BLC FOG WHITE BALANCE 2DNR 8 3DNR DAY NIGHT IMAGE EFFECT SYSTEM EXIT lt FIRMWARE 1 0 11 06 02 RESTORE NO RETURN lt Sub Menu under the SYSTEM mode 1 Please use the UP and DOWN buttons to SYSTEM on the MAIN MENU 2 Please select the desired item and press LEFT and RIGHT buttons to adjust the settings NOTE The version of FIRMWARE shown on the above is for reference only The actual version varies by the production 29 CAMERA TITLE CAMERA TITLE CAMERA ABCDEFGHIJKLMNOPQRSTUV WXYZ0123456789 amp O tp lt gt 4 x gt CLR POS RETURN lt Sub Menu under the CAMERA TITLE mode asf Select gt or with the character selection cursor and click the ENTER button to move the cursor in the direction of the arrow CLR Select to clear one letter of
6. LE WDEM 7680LPDN IO WDEM 7680LPDN IOP License Plate Capture Wide Dynamic Camera with I O USER MANUAL Built with Sony s latest Effio DSP and 1 3 960H Double speed CCD WD image sensor WDEM 7680LPDN IO has the capability of achieving resolutions of over 680 TVL the WDR function can produce clear and true image without noise even in tunnels an environment with very strong light and can capture vehicle license plate numbers at speed up to 120mi hr 200km hr during the day and 35mi hr 60km hr at night The most exciting feature is the Multi Shutter modes Scheduled Shutter Mode Manual Shutter Mode and Auto Shutter Mode WDEM 7680LPDN IO supports Balun RS 485 remote control to control the OSD remotely When it comes to Car License Plate Camera WDEM 7680LPDN IO is definitely ideal to install at any kind of car entrances and exits for capturing car license plates FE CE Copyright 2012 All Rights Reserved Replacing SHM 7540LPDN IO A Please read the Manual before attempting to use this product Specifications and appearance are subject to change without notice CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT OPEN COVERS OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL X Disposal of Old Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection ES syste
7. e Use buttons lt and gt to switch the modes or to adjust the parameters or the values of the settings lll Switch to the sub menu Items with lt symbol in the end contain sub menus For further settings of those items select the desired item with the button 4 or w and press the ENTER button to bring up the sub menu and edit MAIN MENU AUTO IRIS LENS EXPOSURE WDR BLC FOG WHITE BALANCE 2DNR amp 3DNR DAY NIGHT IMAGE EFFECT SYSTEM CVIT TYPE DC SPEED miilini 050 RETURN lt 4 Main Menu Sub Menu 11 IV Return to the previous page Select RETURN and press the ENTER button to return to the previous page V Exit the OSD menu Select EXIT with the button 4 or w and press the ENTER button to exit the OSD menu 4 CONFIGURATION 4 1 Lens When the MAIN MENU is displayed on the screen use the UP and DOWN buttons to the LENS and press the ENTER button to do further setups MAIN MENU AUTO IRIS LENS EXPOSURE DC WDR BLC FOG If 050 WHITE BALANCE 2DNR amp 3DNR DAY NIGHT IMAGE RETURN lt 1 EFFECT SYSTEM EXIT Main Menu Sub Menu TYPE When the DC LENS is in use push IRIS SWITCH on the control board to DC and the TYPE on the menu will be displayed as DC e When the VIDEO LENS is in use push IRIS SWITCH on the control board to VIDEO and the TYPE on the menu will be displayed as VIDEO SPEED The speed of DC Lens is in direct ratio to the number you set T
8. source voltage The power source voltage should be within the specified range Camera must meet the specifications Camera must be connected to a surge protector at all times 6 Objects and liquid entry Never push objects of any kind into this camera as this may touch dangerous voltage points of short out parts that could result in a fire or electric shock Never spill any kind of liquid on the video product 7 Servicing Do not attempt to service this video product by yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all service to qualified servicing personnel 8 Damage requiring service Unplug this video product from the wall outlet and refer service to qualified servicing personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the video product c If the video product has been exposed to rain or water d If the video product has been dropped or the cabinet has been damaged e When the video product exhibits a distinct change in performance LIMITED WARRANTY OKINA USA products are covered under warranty for one 1 year from the date of purchase The warranty will automatically be voided if any of the following occurs 1 Camera sticker is removed If the camera sticker is removed we will not be able to confirm any information regarding when and where the product was purchased We have
9. 5 Related Products oooococcococcononnononcncanncnnonennnnonen conosca nenennase 33 34 5 1 Recommended Lens cceceeceeneeeeceeeeeeeeeeeeeee esses eeeeeens 33 5 2 Recommended Housing amp Bracket 34 1 INTRODUCTION 1 1 Features 1 3 Sony 960H Ex View HAD CCD II Sony Effio WDR II DSP Color 680 TVL B amp W 700 TVL Color 0 03 Lux F1 2 B amp W 0 01 Lux F1 2 ICR 0 005 Lux F1 2 Sens up 0 0001 Lux F1 2 I O Input Output Mechanical IR Cut Filter ICR Capture car license plate numbers at night with speed up to 60km hr 512x Wide Dynamic Range Shutter Modes Auto 196 Step Manual Multi Language OSD Control Fog Reduction High Light Compensation HLC 2D 3D Noise Reduction Digital Image Stabilizer DIS E zoom Function 1 256x Advanced Motion Detection Function Quadrangle Mosaic Privacy Mask Dual Power 12V DC 24V AC 1 2 Package Contents One 1 SHM 7540LPDN IO Camera One 1 Allen Wrench One 1 CS Ring One 1 DC Cord One 1 OSD User Manual One 1 User s manual For any returns please include all components listed above with original packaging in Resalable Condition Absolutely No Returns will be accepted if any component is missing damaged 1 3 Specifications Model WDEM 7680LPDN I0 WDEM 7680LPDN IOP TV System NTSC PAL Image Sensor 1 3 Sony 960H Ex View HAD CCD II Number of Total Pixels 1020 H x
10. 508 V 1020 H x 596 V Resolution Color 680TVL B amp W 700TVL Sony Effio WDR II Minimum Illumination Color 0 03 Lux F1 2 B W 0 005 Lux F1 2 Sense up 0 0001 Lux F1 2 Wide Dynamic Range 512x Normal Camera 54dB Video Output 1 0Vp p Composite 75Q BNC x2 Signal to Noise Ratio S N More than 55dB AGC off Gamma Correction 0 45 Mechanical IR Cut Filter ICR Automatically Switches Switching Lux Level can be adjusted IR LED Working Distance Compatible with Infrared Illuminator Menu OSD Control or by RS485 Control Title TITLE LOCATION Synchronizing System INTERNAL LINE LOCK AC version Only Digital Day amp Night Mode COLOR B amp W AUTO EXT Electronic Shutter Auto Shutter Self Defined Auto Shutter Speed Range Programmable Manual Shutter 196 Steps 1 50 1 60 1 70 1 80 1 90 1 100 1 110 1 120 1 1990 1 2000 sec 1 Step per 1 10sec Capture Speed Day Up to 120 mi hr 200 km hr Night Up to 35 mi hr 60 km hr Automatic Gain Control 0 200 Levels Adjustable Level Settings White Balance ATW AWB PUSH LOCK MANUAL 3200K 6300K ANTI CR WDR BLC Fog Reduction WDR FOG REDUCTION BLC OFF High Light Compensation ON OFF AUTO Flickerless ON OFF Dynamic Noise Reduction 3D 2D Sense Up AUTO Limit x2 x512 OFF Digital Image Stabilizer ON
11. 80 e Fully Cable Managed Mounting Bracket e Uses professional rust proof stainless steel screws e Heater amp Blower e 24V AC 60VA Power Ready Plug for 12V DC Camera 34 35 KINA www okinausa com MADE IN TAIWAN Copyright 2012 All Rights Reserved L 817 www okinausa com 36 R201212 V27
12. Night The camera can be set in Color or B W mode in the Day Night function NOTE 1 EXT function is available for BOX cameras only Optional for OC version 2 Communication Connectors including RS485 are available for BOX cameras only MAIN MENU LENS The modes under the function are EXPOSURE WDR BLC FOG COLOR B amp W AUTO WHITE BALANCE 2DNR 8 3DNR EXTERNAL Optional DAY NIGHT IMAGE EFFECT SYSTEM EXIT lt 1 Please use the UP and DOWN buttons to DAY NIGHT on the MAIN MENU and press the ENTER button to enter 2 Please select the desired item and press LEFT and RIGHT buttons to adjust the settings COLOR The COLOR DAY mode B amp W The BLACK amp WHITE NIGHT mode 20 AUTO DAY NIGHT AUTO LIVE LEVEL TITRES DAY gt NIGHT AAA 003 NIGHT gt DAY ITU 025 DELAY TIME iliii 005 OFF BURST NIGHT OUTPUT 5V RETURN lt Sub Menu under the DAY NIGHT AUTO mode The camera will switch to DAY Color mode or NIGHT B amp W mode according to the set value LIVE LEVEL This indicates the current light level DAY gt NIGHT When the camera detects the current light level is lower than the set value it ll switch from DAY mode to NIGHT mode Value 0 63 NIGHT DAY When the camera detects the current light level is higher than the set value it ll switch from NIGHT mode to DAY mode Value 0 63 NOTE 1 The setting differences between DAY gt NIGH
13. T and NIGHT gt DAY should be more than 5 or the camera will keep switching from DAY gt NIGHT and NIGHT gt DAY constantly 2 The infrared illuminator is not recommended to use under AUTO mode Please switch to EXTERNAL mode when an infrared illuminator is installed DELAY TIME Sometimes there s only a sudden and short light level change Delay time can be set to avoid switching too fast The camera will switch the mode after the set DELAY TIME passed DELAY TIME can be set from 0 to 255 seconds 21 e BURST Turn the BURST function off to reduce the color noise under B amp W mode However not every DVR machines can receive video signals without the color burst signals If the camera cannot switch back to COLOR mode from B amp W mode please turn the BURST function on NOTE The BURST function is adjustable under B amp W and EXTERNAL mode NIGHT OUTPUT UTPUT GND 5V O SYSTEM COLOR 5V GND B amp W GND 5V 485 485 When the camera switches modes the DNI external components will be alerted via DNO DNOpinof He communication connector which only applies to the box ALO cameras GND EXTERNAL EXTERNAL NIGHT INPUT BURST RETURN lt Sub Menu under the DAY NIGHT EXTERNAL mode 22 EXTERNAL mode allows the user to switch the DAY NIGHT mode with externa
14. ddle as HiZ to obtain the best transmitting status Power Input Terminal Connect to the power supply 3 OSD OPERATION 3 1 OSD Control Buttons O i O Je 6000 UP Use this button to move the cursor upwards to the desired item RIGHT Use this button to move the cursor to the right to select or to adjust the parameters of the selected item The parameter increases when the right button is pressed DOWN Use this button to move the cursor downwards to the desired item LEFT Use this button to move the cursor to the left to select or to adjust the parameters of the selected item The parameter decreases when the left button is pressed ENTER Use this button to display the main menu to confirm and to enter the submenus when they re available Items with lt 1 symbol in the end contain sub menus For further settings of those items select the desired item with the button 4 or w and press the ENTER button to bring up the sub menu and edit 10 3 2 OSD Operation MAIN MENU LENS AUTO lt EXPOSURE SET lt WDR BLC FOG OFF WHITE BALANCE ATW lt 2DNR amp 3DNR SET lt DAY NIGHT AUTO lt IMAGE SET lt EFFECT SET lt SYSTEM SET lt EXIT lt l Start to operate the OSD menu Press the ENTER button to bring up the OSD main menu to start operating OSD menus Il Select items with the cursor buttons e Use buttons 4 and v to move the cursor up and down
15. do further setups 2 Please select the desired item and press LEFT and RIGHT buttons to adjust the settings MAIN MENU LENS EXPOSURE WDR BLC FOG WHITE BALANCE 2DNR amp 3DNR DAY NIGHT IMAGE EFFECT SYSTEM EXIT lt The modes under the function are ATW AWB 3200K 6300K ANTI CR MANUAL and PUSH LOCK ATW Auto Tracking White Balance This mode can be used within the color temperature range from 1800 K to 10500 K e g around fluorescent lights outdoors around sodium vapor lamps or inside tunnels AWB Auto White Balance Select this to allow the camera automatically adjust the white balance under all conditions 3200K Select this when the color temperature is around 3200 K when surrounded by sodium lights 6300K Select this when the color temperature is around 6300 K 17 ANTI CR Color rolling suppression Select to set the white balance mode to the ANTI CR mode Follow the instructions on the screen Wait for a few seconds for the camera to set up When completed there will be a message displayed on the screen NOTE The White Balance can not fully function under the following conditions When the following occurred please select PUSH LOCK Mode lt When there s a higher temperature surrounded the object lt When there s darkness surrounded the object lt When there s a fluorescent light surrounded the object or where the light changes all the tim
16. e MANUAL The manual adjustment mode enables a more precise adjustment Increase and or decrease the red and blue color values according to the color changes of the object to set the suitable color temperature RED color vale ranges from 000 to 255 BLUE color value ranges from 000 to 255 PUSH LOCK Follow the instructions on the screen Wait for a few seconds for the camera to set up When completed there will be a message displayed on the screen To find the optimal setting for the current luminance environment in this mode point the camera towards a sheet of white paper and press the ENTER button Whenever the condition changes readjust it 18 4 5 2DNR amp 3DNR Dynamic Noise Reduction MAIN MENU 2DNR 8 3DNR LENS EXPOSURE 2DNR MIDLOW WDR BLC FOG 3DNR MIDLOW WHITE BALANCE 2DNR amp 3DNR DAY NIGHT IMAGE EFFECT SYSTEM RETURN EXIT lt Sub Menu under 2DNR amp 3DNR mode 1 When the noise level is reduced the camera performance can apparently be improved When recording digitally the image file size can be lessened by selecting the noise reduction As the level of gain changes the background noise in the low light level decreases automatically 2 Please use the UP and DOWN buttons to 2DNR amp 3DNR on the MAIN MENU and press the ENTER button to do further setups 3 Please select the desired item and press LEFT and RIGHT buttons to adjust the settings 19 4 6 Day
17. he range of the SPEED can be set from 000 255 NOTE The SPEED function will not work when the TYPE of LENS set to VIDEO 4 2 Exposure When the MAIN MENU is displayed on the screen use the UP and DOWN buttons to the EXPOSURE and press the ENTER button to do further setups MAIN MENU acn LENS MODE AUTO IRIS EXPOSURE BRIGHTNESS If 080 WDR BLC FOG SHUT 1 50 WHITE BALANCE SHUT MIN E 2DNR amp 3DNR SHUT MAX DAY NIGHT LOW LUX BRIGHT x1 0 IMAGE AGC GAIN EN EFFECT SENSE UP SYSTEM EXIT lt RETURN Main Menu Sub Menu MODE Modes to select from AUTO IRIS and SHUT AUTO IRIS e Set to the AUTO IRIS mode to activate and adjust SHUT Shutter Speed e Set to the SHUT AUTO IRIS mode to activate and adjust SHUT MIN Minimum Shutter Speed and SHUT MAX Maximum Shutter Speed BRIGHTNESS Use LEFT and RIGHT buttons to adjust the screen brightness from 000 to 255 SHUT SHUTTER SHUT MIN SHUTTER MIN SHUT MAX SHUTTER MAX The shutter speed is in direct ratio to the number you set Option of SHUT SHUT MIN Speed 1 50 60 1 2000 S Option of SHUT MAX Speed 1 1000 1 100000 S NOTE Only when SHUT MIN is at the speed of 1 50 S SENSE UP is activated and adjustable LOW LUX BRIGHT LOW LUX BRIGHTNESS Use LEFT and RIGHT buttons to adjust the brightness in low lux conditions Option x0 00 x0 05 x0 10 x0 15 x0 20 x0 25 x0 30 to x1 00 13 AGC GAIN Use LEFT and RIGHT buttons to adju
18. ht Compensation Even when there is a massive backlight behind the object bright images of the background and the object can still be captured by selecting the BLC mode BLC MODE AUTO AREA gt MANUAL LEVEL AUTO LEVEL TU 008 The modes under the function are AUTO and MANUAL RETURN lt Sub Menu under BLC mode 15 AUTO Set AUTO LEVEL to adjust the BLC automatically The range is 000 015 MANUAL Set AREA and MANUAL LEVEL to adjust the BLC value manually The default AREA is BOTTOM 1 3 and the default LEVEL is MID Stay with the default value the bottom 1 3 area will be the brighter area with the middle level of brightness AREA BOTTOM 1 3 TOP 2 3 BOTTOM 2 3 LEFT 2 3 and RIGHT 2 3 MANUAL LEVEL HIGH MID and LOW FOG RE Fog Reduction Even when the object is fogged the object can still be captured by selecting the FOG RE mode FOG REDUCTION CONTRAST HIGH LEVEL int 030 RETURN lt Sub Menu under FOG RE mode CONTRAST Use LEFT and RIGHT buttons to adjust CONTRAST Option are HIGH MIDHIGH MID MIDLOW and LOW LEVEL Use the LEVEL function to adjust the brightness of the whole area Level 000 063 OFF When set as OFF there ll be no wide dynamic range 16 4 4 White Balance The screen color can be adjusted by using the WHITE BALANCE function 1 Please use the UP and DOWN buttons to WHITE BALANCE on the MAIN MENU and press the ENTER button to
19. l signals For example you can synchronize the DAY NIGHT mode between the camera and the infrared LED illuminator For the camera with the light sensor it is suggested to set the DAY NIGHT mode to EXTERNAL to ensure the best result NIGHT INPUT Select input level LOW It will be the COLOR mode if the input signal is HIGH On the contrary it will be the B amp W mode HIGH It will be the B amp W mode if the input signal is HIGH On the contrary it will be COLOR mode HIGH 3 12V or OPEN LOW GND PUT LOW HIGH TEM DNI HIGH COLOR B amp W LOW B amp W COLOR 485 485 When the external infrared illuminator is DNI in use the camera can switch to DNO lt COLOR or B W mode via DNI pin of the ALO communication connector which only GND applies to the box cameras 23 4 7 Image IMAGE MAIN MENU RESOLUTION MID SHARPNESS MANN 010 LOW LUX SHARP X0 5 CONTRAST MINI 000 LENS EXPOSURE WDR BLC FOG WHITE BALANCE 2DNR amp 3DNR DAY NIGHT IMAGE EFFECT SYSTEM EXIT lt SATURATION IT 000 HUE IT 000 MIRROR NORMAL POS NEG OFF WHITE PIXEL COMP SET lt DETI IDMI Sub Menu under the Image Function 1 Please use the UP and DOWN buttons to IMAGE on the SETUP MENU and press ENTER button to enter 2 Please select the desired item and press LEFT and RIGHT butt
20. ms This symbol on the product or on its packaging indicates that this product shall not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The recycling of materials will help to conserve natural resources For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product CAUTION 1 Never point the camera toward the sun Do not expose the lens directly to the sun or to strong light as this may damage the pick up device 2 Handle this camera with care Avoid any shock or bumping of the camera Improper handling could damage the camera 3 Requires a proper operating environment This camera is designed for indoor use The allowable temperature range for operation of this camera is between 14 F 122 F 10 C 50 C 4 Clean the front face or lens It is recommended that the surface be cleaned every 3 6 months Cleaning should be done by using a chamois a very fine soft cloth lens tissue or cotton tipped applicator and ethanol to carefully remove any fingerprint or dust 5 Check the power
21. no other way to verify the purchase record without the serial number on the camera sticker therefore it should not be removed 2 Camera is modified in any way If the camera is scratched damaged or modified in a manner not described in this manual the warranty will be voided immediately It is the customer s responsibility to keep the camera in good condition 3 Video or power cable is cut The video cable and the power cable should not be tampered with Cutting or modifying of the cables will result in termination of the warranty TABLE OF CONTENTS 1 Introduction sise 5 6 Til Features ici hive oak ath ets fel ee ee 5 1 2 Package Content sitroner reinii ga dires 5 1 93 SP CIICANONS i rita 6 2 Camera Overview is ssrssseeneneeneseeneneenes 7 9 2 Dimensions a ata ia 7 2 2 Parts and Functions iia 7 9 3 OSD Operation 1 1 6 0 sauter duree dir tado ta 10 12 3 1 OSD Control Buttons 2 0 0 eee eter ener e areata een eeeeeeneees 10 32 OSD Operation sise pree eand eaa ai 11 12 4 Configuration ao aa aa 12 31 AV LenS epei oieee rod cines ote 12 A O 13 14 4 3 WDR BLC FOG RE 14 16 4 4 White Balance henri iynnernee tete a 17 18 4 5 2DNR 8 3DNR Dynamic Noise Reduction 19 46 Day NiQht 2 5 tes cerca aoe ER ne Goad cide eed 20 23 AT Mad ieee ie ee Ae ae 24 25 4 8 Effect isa tres adie ee 25 29 AOS MV irritada 29 31 4 10 Balun Function UTP 32 AAA EXit cisca seed iene liners AE a eater 32
22. ons to adjust the settings RESOLUTION Options are HIGH MIDHIGH MID MIDLOW LOW and OFF SHARPNESS Level 000 015 The contour of the video image becomes cleaner and more distinguished as the level of SHARPNESS increases If the level goes up extremely it may affect the video image and cause noise LOW SHARP SUP LOW LUX SHARPNESS Level x0 x1 0 Select to adjust the value of the sharpness in low Lux environment CONTRAST Level 032 031 Select to adjust the value of the contrast SATURATION Level 050 050 Select to adjust the value of the gain 24 HUE Level 050 050 Select to adjust the value of the hue MIRROR NORMAL VERTICAL vertical rotated MIRROR horizontal rotated and ROTATE vertical and horizontal rotated POS NEG ON OFF Positive Negative Reversal Select ON or OFF to enable or disable this function WHITE PIXEL COMP WHITE PIXEL COMPENSATION Level 000 010 Select to enter the sub menu for further settings Click START to search for the white pixels of CCD and set MARKER to ON to display the pixels on the screen Decrease the THRESHOLD value to find more white pixels or increase the value to reduce the number of white pixels 4 8 Effect MAIN MENU EFFECT MOTION DET PRIVACY MASK DIS E ZOOM HLC LENS EXPOSURE WDR BLC FOG WHITE BALANCE 2DNR amp 3DNR DAY NIGHT IMAGE EFFECT SYSTEM EXIT lt RETURN lt Sub Menu under the EFFECT mode
23. or further settings PRIVACY MASK AREA SEL MODE POSTION COLOR TRANSP MOSAIC RETURN lt Sub Menu under the PRIVACY MASK mode AREA SEL There re 1 15 areas which can be masked MODE Options are ON OFF Choose ON to show the protected area on the screen OFF to hide the protected area on the screen POSITION Press ENTER button for further settings Adjust the area size and shape by dragging the vertices of the quadrilateral Push ENTER to switch the vertices in the sequence of left top right top left bottom and right bottom and push ENTER again to return to PRIVACY MASK submenu COLOR Use LEFT and RIGHT buttons to adjust the color of PRIVACY MASK The options are BLACK RED GREEN BLUE YELLOW CYAN MAGENTA and WHITE TRANSP Use LEFT and RIGHT buttons to adjust the transparency of PRIVACY MASK The options are 0 00 0 50 0 75 and 1 00 Note that the MOSAIC will be disabled when the transparency set to 7 00 27 MOSAIC Options are ON OFF Use LEFT and RIGHT buttons to display the block in mosaic or not DIS Digital Image Stabilizer Options are OFF and ON When set to ON the DIS function will help to prevent vibration and the E Zoom function will be disabled E ZOOM E ZOOM lun 004 AI ARIANE 000 IEA 004 RETURN lt Sub Menu under the E ZOOM mode Select ON and press ENTER button to do further setups Options are RATIO 001 256 zoom in 1 to 256 times PAN 512
24. st AGC GAIN The bigger the number the brighter the screen can be Note that the noise will increase as well Option 000 200 SENSE UP SENSE UP is used to maintain a brilliant vivid screen image by automatically detecting changes in the level of light under low light level conditions Select the desired item and press LEFT and RIGHT buttons to adjust the settings Option x2 x4 x8 x16 x32 x64 x128 x256 x512 and OFF 4 3 WDR BLC FOG RE 1 When the MAIN MENU is displayed on the screen use the UP and DOWN buttons to WDR and press the ENTER button to do further setups MAIN MENU LENS EXPOSURE WDR BLC FOG WHITE BALANCE 2DNR amp 3DNR DAY NIGHT IMAGE EFFECT SYSTEM EXIT lt The modes under the function are WDR BLC FOG RE and OFF 2 Please select the desired item and press LEFT and RIGHT buttons to adjust the settings WDR Wide Dynamic Range When there are both bright and dark areas at the same time selecting this mode makes both areas distinctive 14 WDR LEVEL mumuh 185 DARK AREA MIDHIGH BRIGHT AREA Ilim 050 RETURN lt Sub Menu under WDR mode LEVEL Use the LEVEL function to adjust the brightness of the whole area Level 000 255 DARK AREA Use LEFT and RIGHT buttons to adjust DARK AREA Option are HIGH MIDHIGH MID MIDLOW and LOW BRIGHT AREA Use the BRIGHT AREA function to adjust the brightness of the bright area Level 000 255 BLC Back Lig
25. the input POS Adjust the position of the camera ID COMM Select SET lt to enter sub menu for further settings 1 The CAM ID PROTOCOL and BAUD RATE will be displayed for the first five seconds on boot 2 Changes made to the CAM ID PROTOCOL and BAUD RATE will only take effect after you exit the COMM page This is to prevent the camera from unexpected disconnecting caused by remote access CAMERA ID 1 1024 DISP CAM ID OFF TOP LEFT TOP RIGHT BOTTOM LEFT BOTTOM RIGHT Select to hide the CAMERA ID or to adjust the CAM ID position BAUD RATE 2400 4800 9600 19200 38400 PROTOCOL PELCO D PELCO P NOTE The COMM function is available for models with RS485 only 30 SYNC Only available to cameras with AC power input Use the LEFT amp RIGHT buttons to switch SYNC mode between INT Internal and L L Line Lock Set to L L and click ENTER to bring up submenu for further settings LANGUAGE Use the LEFT amp RIGHT buttons to select the language preference The options are ENGLISH ff EGEL FIRMWARE Please refer to the actual firmware The figure shown on above is for reference only RESTORE Select NO to exit or select YES to restore all the settings to the defualt value NOTE The following items will not be restored CAM ID PROTOCOL BAUD RATE and LANGUAGE 31 4 10 Balun Function UTP A Balun s function is available for BOX cameras only lt would normally require 3 terminals

Download Pdf Manuals

image

Related Search

Related Contents

E-Manual  Lipstick – User Manual  T4 TimeSaver.NET Help & User Guide  2012年3月版  iP41BVJ (ming)  Panasonic Lumix DMC-FZ150 User`s Manual  File  Andrea Electronics EDU-455 headset  Technical Specifications  NEC EA244WMi-BK Mechanical Drawings  

Copyright © All rights reserved.
Failed to retrieve file