HEPRO Sving - Mobility Aids
Contents
1. TELESCOPIC POLE to carry support Gir hepro devices User reference manual MODEL GRIPO ALU MoOBiLITYCARE mobil tg products since 99 2 www mobilitycare net au 1 12 Marriott Street Oakleigh MELBOURNE 3166 Phone 03 9568 8383 Fax 03 9568 5114 a nn peike Telescopic pole to carry support devices Edition 03 Date 16 06 11 Side 1 av 8 TELESCOPIC POLE to carry support dj hepro devices User reference manual MODEL GRIPO ALU HEPRO aid manutacturer HEPRO is a Norwegian industrial company that develops manufactures and sells technical aids for adults and children with mobility impairment The company was established in 1987 and has to day about 50 employees The company s headquarter and factory is located in Rognan Nordland Hepro AS vermoan 9 8250 Rognan NORWAY Technical Service Services are performed in the factory at Rognan but also by partners in many parts of the country Our sales personnel are also trained in technical maintenance If errors on products or other queries please contact your supplier or importer Adaptations and Special Adaptations Hepro is a manufacturer and can therefore offer user customized solutions when required Customizations and custom solutions to meet individual needs is part of the daily tasks of the plant Warranty When used in accordance with the supplied assembly guide and the user reference manual Hepro provides a two year warrant2. ate in place 2 Position the pole in a suitable place with the base plate flat against the floor 3 Pull out the foot pedal 4 Rotate the inner tube clockwise so it want slide down by it s own weight The extend the pole till the top plate reaches the ceiling by pulling the inner tube out of the outer tube 5 Close the quick release 6 Press down the foot pedal 7 Check that the red mark is no longer visible If not go back to point 4 8 If the pole is tilted pull out the foot pedal and adjust it vertical and press down the foot pedal again 9 Installation of accessories by using the Universal link can now be done 10 If the red mark still is visible this may be the reason e tis too big distance between the ceiling and the top plate when the rotation of the inner tube started e The quick release could have been too loose Tighten the nut a few millimeters e The ceiling is too weak and is lifted by the force in the pole s gas spring e The pole was ice cold during assembly See also the Assembly guide illustrated with pictures a Telescopic pole to carry support devices Edition 03 Date 16 06 11 Side 5 av 8 TELESCOPIC POLE to carry support if hepro devices User reference manual MODEL GRIPO ALU 1 1 2 Disassembly Pull out the foot pedal and open the quick release The inner tube can now be pushed down into the outer tube 1 1 3 How to use Gripo Alu can be used in many situations where there is a
3. dle of pole kg 100 Product weight without accessories kg 4 7 Max user weight kg 150 MATERIALS AND COMPONENTS Inner and outer tubes Aluminium 6063 T6 Surface protection tubes Eloxsert Gas spring Stabilus LiftOMat Top plate Plastic PA6 GF15 Base plate Plastic PA6 GF15 Tubes for accessories Aluminium 6063 T6 Eloxert 1 2 3 Cleaning performed by user Normal dusting and cleaning with wet cloth and soap is sufficient mn Telescopic pole to carry support devices Edition 03 Date 16 06 11 Side 7 av 8 TELESCOPIC POLE to carry support og devices HF hepro User reference manual MODEL GRIPO ALU 1 2 4 Maintenance performed by user It is not intended the user to perform any maintenance 1 2 5 Storage and retention when not in use If the pole shall be stored for a long period it has to be cleaned covered and stored in a dry place 1 3 Accessories See separate brochure 1 5 Changelog Edit 00 13 07 2009 Tender documentation Edit 01 18 11 2009 Updated for product introduction Edit 02 24 01 2011 Changes on page 5 Edit 04 16 06 2011 Changes on page 1 5 og 6 Telescopic pole to carry support devices Edition 03 Date 16 06 11 Side 8 av 8
4. ference manual MODEL GRIPO ALU 0 0 1 0 2 0 3 General The documentation covers the model Gripo Alu Short product description Gripo Alu is classified in NS EN ISO 9999 as a medical device and within the product group 180806 and is defined as a TELESKOPIC POLE to carry support devices The pole is tested according to EN 12182 and approved for a horizontal load of 100 kg on the middle of the pole with maximum length 3 0 meter It is produced in the materials of aluminum and plastic and intended for clamping between the floor and ceiling of any room where the ceiling and floor have enough strength to withstand a point load of 100 kg In each end of the pole there is a plate shaped end plate with a friction ring installed The force between the plates is maintained by a gas spring with an average pressure of 100 kg This makes the pole possible to be installed without use of any form of screw or nail connection causing perforation of floor or ceiling and the dismantling of the bar leaves no marks With support of different accessories the pole can be adapted to many different pole use situations The pole can be used in rooms with headroom from 2 1 meter to 3 0 meter and it is delivered in only one model in which the aluminum tubes are in the colour nature aluminum and all plastic parts in black colour Safety Provisions The installation of the pole has to be done by a trained person or by one who has set himself thorou
5. ghly in the assembly instruction Warning e The product should not be adopted before this user reference manual has been carefully read e All kinds of support devices may involve danger if incorrect assembled or wrongly used e If the pole indicates any sign for loosening it shall not be used and help be called e The pole must not be installed in rooms with headroom exceeding the approved or be placed where there can be any risk for pinching e If the red warning sign is visible the assembly is wrong and the pole must not be used ee Telescopic pole to carry support devices Edition 03 Date 16 06 11 Side 4 av 8 TELESCOPIC POLE to carry support dj hepro devices User reference manual MODEL GRIPO ALU 1 1 User Manual 1 1 1 Installation and assembly TEST BEFORE INSTALLATION Beforehand the ceiling should be examined with regard to strength and opportunity for placement of the pole at the desired location At plate covered ceiling the pole should preferably be placed directly under the beams or nailing strip to prevent plate damage If the ceiling is made of concrete the pole can be placed anywhere If the wallboard is made of gypsum or other week material The Top plate Big has to be used or the ceiling has to be reinforced by for instance using a more solid wallboard between the pole s top plate and the ceiling INSTALLATION The pole is delivered with a fixed base plate and loose top plate 1 Set top pl
6. need for support Use of equipment and methods will in cooperation with the user the therapist and the supplier s qualified person be best taken care of See also the illustrated brochure 1 1 4 Error Indications and check out of these If the pole seems loose out of plumb or there are marks on the floor or the ceiling that indicates that the pole has displaced the assembly must be checked by a competent person If the red mark on the top of the inner tube appears the pole must not be used before new installation is done and checked This may indicate that the pole is either not installed correctly or the ceiling is not strong enough 1 1 5 Inquiry by mistake If an error occurs using problems or suspected wrongly installation please contact your supplier By request always give the serial number affixed to the pole ane Telescopic pole to carry support devices Edition 03 Date 16 06 11 Side 6 av 8 TELESCOPIC POLE to carry support dfr hepro devices User reference manual MODEL GRIPO ALU 1 2 User s Guide 1 2 1 Information about the type and model The user s guide covers the following type and model GRIPO ALU 1 2 2 Technical specifications Gripo Alu DIMENSIONS Description Unit Dimension Headroom m 2 1 3 0 Inner tube mm 031 x 6 0 Outer tube mm 40 x 3 0 Average gas spring pressure N 900 Top plate mm 0290 Base plate mm 200 Max horizontal load on the mid
7. y against defects in material and workmanship Please address warranty complaints or other inquiries about the product to your supplier or importer Always state the product s serial number as a reference The product is designed tested and produced in conformity to following regulations and requirements NS EN 12182 Technical aids for disabled persons 93 42 E F Equipment class 1 marked CE a Telescopic pole to carry support devices Edition 03 Date 16 06 11 Side 2 av 8 TELESCOPIC POLE to carry support devices User reference manual MODEL GRIPO ALU 0 1 0 3 aS d SS OA OUN 1 2 1 2 1 1 2 2 1 2 3 1 2 4 1 2 5 1 2 7 1 3 1 4 1 5 Gi hepro TABLE OF CONTENTS General Short product description Safety Provisions Warning Operating instructions Installation and assembly Disassembly Use and Operation Error Indications and checkout of these Inquiry by mistake User s Guide Information about type and model Technical specifications Cleaning performed by user Maintenance performed by user Storage and retention when not in use Page 4 Page 5 Page 6 Page 7 Page 8 Supplementary description of error indications Attachments Accessories Pictures Designs Not applicable Changelog Page 8 Page 8 a Telescopic pole to carry support devices Edition 03 Date 16 06 11 Side 3 av 8 TELESCOPIC POLE to carry support dfr hepro devices User re
Download Pdf Manuals
Related Search