Chapter 5
Contents
1. Backed up Video Playback Exportation 27 5 1 Playing back Backed up Video a eta pent en tr aot e capas 27 5 2 Exporting Backed up VIG CO 2 28 User s Manual INEX Backup Chapter 1 Introduction This manual describes installation and operation of INEX Backup software which is designed to be used with iNEX Standard software The backup service controls backup of recorded video saved in the iNEX recording servers or DVRs and playback of backed up video saved in the iNEX backup server The iNEX system performs the backup and playback based on the settings of the administration or federation service If the backup service is registered on an administration service the system only backs up video saved in the recording servers and DVRs which are registered on the administration service If the backup service 1s registered on a federation service the system backs up video that is saved in the recording servers and DVRs registered on the all administration services that are registered on the federation service A maximum of 64 backup servers can be used and a maximum of 64 recording servers and 256 DVRs can be registered on one backup server The number of channels that can be backed up differs depending on the type and number of WIBU Keys maximum 256 channel2. gt a video IP SURVEILLANCE BEYOND IMAGINATION A O er a E ana User s INEX Backup Table of Contents Chapter 1 Introduction csi TOT 1 IS RU e 2 Backup Service Registered on Administration Service 2 Backup Service Registered on Federation Service B Chapter 2 Installation REN TEL 5 2 Product Mal MOON 5 Package Contente NR TETTE T 5 System D 2 2 MIST AMMO AM o EE 5 AS PP ume ru usce qu resa inan PEU rS aM 5 XA 9 Chapter 3 Getting Started cccccccoocnnnccnnnccccnonnconnnncnnonononennnonononanncnnnnnnnonannennnnnnns 11 9 1 SOT VIC CS E TT OOo 11 3 2 Registering Backup 11 Registering on Administration Service ooooncccnccccccconnnnnncononononccnnnnnononannnnnnnnos 12 Registering on Federation Service 14 Chapter 4 Recorded Video Backup 19 4 1 Adding Backup 5 19 Adding to Administration Service 19 Adding to Federation 20 4 2 Setting up Backup 22 Backup Coverage 22 T 23 4 3 Allocating Storage A e 24 Managing Storag EQ 25 Chapter 5
3. 4 When the following screen appears select Install and click Next 5 Select Backup Service and click Next 6 Designate the folder path to install the service Clicking the Disk Cost button shows the available and required disk space for each hard disk drive for the installation Then click Next iB iNEX Welcome to the iNEX Setup Wizard The installer will guide you through the steps required to install iNEX on your computer Choose setup operation O install install WibuKey Driver only WARNING This computer program is protected by copyright law and international treaties Unauthorized duplication or distribution of this program or any portion of it may result in severe civil or criminal penalties and will be prosecuted to the maximum extent possible under the law Cancel Next gt Select Program to Install Upgrade Select Programs Backup Service Client Cancel lt Bi Next gt iB Select Installation Folder The installer will install NEX to the following folder To intall in this folder dick Next To install to a different folder enter it below or dick Browse Folder Disk Cost Cancel INEX Backup 7 Enter the IP address and port number of the administration EE or federation service and click Next You can change the 099091 settings in the Service Manager program after completing installation When the installation 1s complete the b
4. Uninstall iNEX O Are you sure you want to uninstall this product 4 Click the Remove All or Do not remove button when the following screen appears Clicking the Remove All button deletes all saved data including backed up video and previous settings in the system Clicking the Do not remove button uninstalls the software without deleting any saved data in the system and keeps all saved data in the system iNEX A WARNING Do you really want to erase 5 Do you want to remove all saved data Erased data cannot be restored Remove all Do not remove OK Cancel NOTE The deleted data cannot be restored once the data is deleted 5 Click the OK button to complete the uninstall process User s Manual 10 INEX Backup Chapter 3 Getting Started Services should be running on the 1NEX server for the NEX program to operate 3 1 Running Services When the backup service 18 installed the service runs automatically You can Client also start or stop running the service manually Go to the Start Menu gt Click setup 1 1 ServiceMana iNEX Run the Service Manager program Tod stili M Check the status of the service If the service is not Op listed as Working under Status start the service manually Refer to the NEX Standard User s Manual for details about the Service Manager program Backup Service You must register backup services max
5. button to complete the installation Installation Complete NOTE After successfully installing the service the service Service Manager program the 32 icon is displayed in the 222 notification area of the task bar and the Setup program run automatically 11 Connect WIBU Keys to the backup server INEX Backup 1 Stop running the services and Client program first NOTE The iNEX software might not uninstall correctly if you uninstall it while the services or Client program is running CAUTION The iNEX software should be uninstalled following the procedures below If you delete the installation folder manually the iNEX software cannot be uninstalled or reinstalled 2 Go to the Start Menu and click INEX Click Uninstall NEX NOTE You can uninstall the software by using the software 8 iNEX CD Insert the software CD in the backup server and run the MI e Setup exe file Select Hemove and click Next The installer will guide you through the steps required to install iNEX on your computer Choose setup operation Repair O Remove install WibuKey Driver only WARNING This computer program is protected by copyright law and international treaties Unauthorized duplication or distribution of this program or any portion of it may result in severe civil or criminal penalties and will be prosecuted to the maximum extent possible under the law Cancel 3 Click Yes when the following screen appears
6. disks and hard disks set to Dynamic cannot be allocated storage 15 recommended to add a new unformatted hard disk drive to ensure stable backup If you are setting up a hard disk drive which contains data however you are to delete partition s and the file system in advance after formatting Refer to the PC server user s manual or consult with the PC server manufacturer for details about how to format or delete the partition s and file system e When removing a hard disk drive that contains backed up video from a backup server and installing it in another backup server you cannot search or play back the video backed up on the original backup server The total amount of storage for one backup server cannot exceed 50 000 GB Backup Coverage Time 2 Address v MI Recording Serios Status Stopped Hn hp andwidth 2 Targel Frame nat time First Comers list count p Tolal Space Total Space 0 00 Md A Teg 1 Click the Total Space Setup button after adding backup sites and the Storage Setup window appears Click the Add button at the bottom The Add Storage window appears and a list of available hard disk drives is displayed with information about each drive 24 INEX Backup Drive Displays the drive name and volume label If a file system has not been created on a hard disk drive PHYSICALDRIVE No will be displayed instead of the drive name and volume l
7. installed automatically and it may take some time This installation step will be skipped if the programs are already installed on your computer User s Manual 9 Disconnect WIBU Key from the server if a WIBU Key is connected Then install the WIBU Key device driver Decide Wibukey Device Driver Installation following the instructions Check to Install Wibukey Driver Install Wibukey Device Driver Note Wibukey Device Driver is rquired to start service Next gt iNEX ERR WibuKey Setup Remove a WIBU KEY on Your PC while installation of WIBU KEY Device Driver Welcome to the WibuKey Software Setup program This program will install WibuKey Software on your computer It is strongly recommended that you exit all Windows programs and the control panel before running this Setup program Click Cancel to quit Setup and then close any programs you have running Click Next to continue with the Setup program WinZip Self Extractor WkRuntime exe Welcome to the WibuKey Runtime Kit version 6 00a Build 129 2009 12 03 Please click Setup to install the WibuKey driver and tool files Version 6 00a Unzipping WkLseLlS chm y WibuKey Setup WibuKey Software Setup is complete Setup can launch the Readme help file with the latest product informations Yes want to view the Readme text now Click Finish to complete Setup 10 When the following screen appears click the Close
8. the backup service on a separate PC from other iNEX services and Client program for better performance of video backup and playback e Inthe Windows Start menu go to Control Panel Double click the Power Options to open the Management Properties dialog box Under the Power Schemes tab set both Turn off monitor and Turn off hard disks to Never Installing the Client program of NEX Backup is identical to installing that of INEX Standard Refer to the Standard User s Manual for details CAUTION If an older version of iNEX software is installed on your computer a screen appears asking you to upgrade the software In this case you are required to upgrade the software according to the instructions in the screen Server System Insert the software CD in the backup server 2 Run the Setup exe file of the software CD User s Manual NOTE The User Account Control window might appear when using the Microsoft Windows Vista or later operating system Click Allow and install the software following the instructions 3 Select the language in which to run the program and then click OK Language Selector NOTES To properly display the selected language your PC s operating system should be set to support the selected language Tochange the iNEX program s language after the software has been installed select Language Selector in the NEX Utility folder of the Start menu before running the NEX program
9. 64 on the administration or federation service If the IP address and port number of the administration or federation server 1s entered correctly during the installation the service is registered on the administration or federation service automatically Registering the backup service on the administration service allows you to back up video saved in the recording servers and DVRs registered on the administration service Registering the backup service on the federation service allows you to back up video saved in recording servers and DVRs registered on all administration services that are registered on the federation service The backup service should be connected to the administration or federation service via the network connection on which the backup service is registered Go to the Start Menu and click NEX Run the Service Manager program and click the Option Server Option menu INEX Service Manager Client Setup ServiceManager Uninstall User s Manual e Address Port Set up the IP address and port number of the administration or federation server for connection to Administration Service Address the administration or federation service EGITTO 12 7 0 0 1 Registering on Administration Service 1 Go to the Start Menu gt Click iNEX Run the NEX Setup program and enter login information Enter user ID and password iNEX Client Setup Servic
10. GB 141 52 GB Free Storage Capacity 20 00 GB 0 00 MB Free Resize Storage Allows you to increase the storage capacity Clear Storage Allows you to delete all data backed up in the selected storage NOTE Search or playback of backed up data will be stopped when storage is resized or cleared CAUTION Clearing storage deletes all data backed up in the storage and the deleted data cannot be restored 26 INEX Backup Chapter 5 Backed up Video Playback amp Exportation You can play back backed up video or export backed up video to USB devices First check the following and run the Client program e Services should be running on the system Refer to the INEX Standard User s Manual for details Devices should be added to a device group Refer to the INEX Standard User s Manual for details There should be backed up data in the backup server Refer to Chapter 4 Recorded Video Backup p 19 for details 5 1 Playing back Backed up Video 1 Search and playback of backed up video in a backup server are supported in the Backup Search panel maximum 4 If the Backup Search tab is not on the tab panel go to the System menu click New Tab and then Backup Search Client Local Host admin Live 1 System View Playback Abo Live Remove Play iNEX Client Local Host admin Backup Search 1 Export Ctri E 2 DVR Search System View Playback About Print 5 Backup Sea
11. Service Single System gan Network Keyboard Administration Monitoring Multi System Client Video Analytics NEX Administration NEX Monitoring INEX Administration iNEX Monitoring iNEX Streaming INEX Backup Backup Service Registered on Federation Service 92 Metwork Keyboard Pd INEX Client iNEX Video Analytics NEX Administration iNEX Monitoring NEX Administration NEX Monitoring Network 4 Claas ak oe User s Manual INEX Backup Chapter 2 Installation 2 1 Product Information Package Contents e Installation CD e User s Manual e WIBU Key USB Dongle NOTES e WIBU Key is removed from a backup server the backup might not be done properly e When you connect or remove a WIBU Key stop running the backup service first System Requirements Operating System Microsoft Windows XP x86 32 Bit Vista Home Standard Business Ultimate Enterprise Microsoft Windows 7 Home Premium Professional Ultimate Microsoft Windows Server 2003 2008 e CPU Intel Core II Quad 8200 2 33 GHZ Intel Xeon 3 0 GHz or faster e RAM 2GB or more e VGA ATI RadeonTM HD 2400 or NVIDIA GeForce 5500 ATI recommended 1024x768 24bpp or higher Hard Disk Drive 5 GB or more free space LAN Gigabit Ethernet or faster 2 2 Installation NOTES tis recommended to install
12. Service 127 0 0 1 11005 10 0 17 127 11005 e Type Displays the service type e Address Display the IP address and port number of each server Cancel 4 Select a backup service to register on the administration service and click the OK button User s Manual 2 int admini 127 0 0 1 A Setup Recording Sennce ES Haning Serve 127 00 1 1T00U 1000 691 24 CN ALINETDEMCO S108 Shear Service 100011611007 U N LINETLIEMU dara ideo rayos har E Video Farah mi 2 121 611007 CON LINEJDEMD 57 dang Tai vo Mask Serve E Menden T7007 1104 10000410103 19004 OFF LINE Boece Barros z TEM 120000111008 100 12 11006 ON LINE OEN erm 5 Select a backup service and click the button at the bottom The Setup Backup Service window appears Select the Information tab setup Backup Service irirna Addr 10 0 110 103 11005 6 Enter the backup service s and click the Close button Registering on Federation Service 1 Go to the Start Menu Click iNEX Run the NEX Setup program and enter login information 14 INEX Backup Enter user ID and password Client Setup ServiceMana ipe gt EAN Local Host Lo Remember my ID on this computer Site Name Select the federation service to connect to from the list You can add other federation services to the list or modify informa
13. abel The iNEX program considers any hard disk drive that does not use Windows file system FAT32 NTFS as if no file system has been created Disk Type Displays the type of hard disk drive Capacity Displays the total storage capacity and available storage capacity 2 Select a hard disk drive to allocate storage and click the Add button at the bottom The Allocate Storage window appears Allocate Storage D WNexusStorage rive Type IDE ree Space 161GB Storage CapadGty Path Displays the storage folder path Drive Type Displays the type of hard disk drive Free Displays the available storage capacity Storage Capacity Sets up the storage capacity to be allocated to the hard disk drive Min 20GB If the Windows operating system is installed on the hard disk drive you must reserve more than 10GB of free hard disk for proper system operation If no file system has been created on the hard disk drive the backup server automatically creates a proprietary video database file system when storage is allocated to ensure more stable backup and allocates storage to the entire hard disk drive automatically Managing Storage You can manage storage of all hard disk drives used in the current backup server or of a specific hard disk Storage of All Hard Disk Drives Click the Setup button The Storage Setup window appears 25 User s Manual Storage Setup Clear All Backed up Data ILI EE TI 100 L
14. ackup service 1s connected to the administration or federation scien ep dolos service via the network if the services are operating HS 10 0 110 102 11001 Cancel 8 When the following screens appear click Next Confirm Installation Installing iNEX The installer is ready to install on your computer iNEX is being installed Click Next to start the installation Unpacking package file NOTE The following screen appears when using Microsoft Windows Vista or later operating systems ltis recommended Ri that you check the Disable WS Discovery Windows Service faPHost FDResPub box If you do not check the box the IS program cannot auto scan devices using ONVIF Conformance protocol when scanning devices for device registration E Disable WS Discovery Windows Service FDResPub Note Some devices are unable to auto scan if WS Discovery is in use NOTE The following screen appears when the port number INEX of the service being installed is already in use and the screen displays the port number that will be changed The changed port number will be applied when the service starts operating after installation O Service ports confirmation Following service ports will be changed to avoid port redundancy Backup Service 11005 gt 11105 NOTE NET Framework and the Visual C Runtime Libraries are
15. displayed Add Backup Site e Site Displays recording services and DVRs that Recording Service 1 64 currently connected to the administration service via ei the network M Recording Service Recording Service 10 0 110 103 11002 127 0 0 1 11002 19 4 Select recording services and DVRs to back up and click the OK button Adding to Federation Service 1 Go to the Start Menu Click iNEX Run the iNEX Setup program and enter login information 20 INEX Backup D NEX Setup admin 2 Select a backup service and click the L button at the bottom in the Service menu The Setup Backup Service window appears Select the Site Setup tab setup Backup Service Backup Coverage Time Stats Bandwidth 2 Targel Frame start tima Carmera Iit count Total Space Total Space 3 Click the Add button at the bottom The Add Backup Site window appears and a list of available recording services and DVRs is displayed 21 User s Manual Add Backup Site e Site Displays recording services and DVRs that Recording Service 1 64 WR 0 256 are currently connected to the federation service a descr via the network Administration MI Recording Service ME Recording Service 10 0 110 103 11002 127 0 0 1 11002 19 4 Select recording services and DVRs to back up and click the OK button 5 Set up a backup schedule and allocate storage R
16. eManager Site Name i il Uninstall 2 Remember ID on this computer Site Name Select the administration service to connect to from the list You can add other administration services to the list or modify information about the administration service in the list by clicking the button at the right Append Remote Site Site Name Service Address Service Port Designate the mM name of the administration service and enter the IP address and ART port number of the administration server to which the backup service Port service 1s connected default 11001 Use DVRNS Server Address Server Port User ID Password Enter your user ID and password The default user ID is admin and default password is 12345678 You can change the user ID and password in the User menu Refer to the iNEX Standard User s Manual for details Remember my ID on this computer Check the box if you want to save your ID for logging on 2 Select the Service menu and then register a backup service on the administration service following the procedures below 12 INEX Backup D NEX Setup admin ie 3 Click the button at the bottom The Service Registration window appears and a list of available services is displayed with information about each service Service Registration e Name Displays services that are currently connected to the administration service via the DA PETE network ws Backup Service Backup
17. efer to the NEX Backup User s Manual for details about setting up the backup schedule and allocating storage 4 2 Setting up Backup Schedule setup Backup Service pie Coverage Time c d Addresa i Recording Service SET Moppel es Coverage Targel Frame sta time Cima let count Tolal Space Total Space i EA es Select a recording service or DVR from the Site list after adding backup sites You must set up a backup schedule separately for each recording service and DVR Backup Coverage Time Click the Backup Coverage Time Setup button and add a backup period Preset by clicking the button 22 INEX Backup Time Coverage Setup Type TimeLapse Priority Bandwidth 0 Unlimited e Priority Displays the priority of backup period Preset You can change the priority by using the FM or button e Name Displays the name of backup period Preset e Bandwidth Sets up the maximum bandwidth You can control the network bandwidth by limiting the network bandwidth depending on the network traffic The proper bandwidth limit setting can minimize the decrease of recording speed when video is backed up while recording However if you limit the network bandwidth backup speed might decrease You can add a new Preset or edit a saved Preset by clicking the Add or Modify button Setting up the time span Preset for backu
18. efer to the iNEX Standard User s Manual for details D 29667177 video WEEE Waste Electrical amp Electronic Equipment Correct Disposal of This Product Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal 28 V1 8
19. ett All backed up data in this backup service will be deleted Please be careful before clicking this button Reconstruct Abnormal Backup Timetable You can reconstruct timetables with abnormal recording which might occur because of slow network connections or hard disk errors It may take from a few hours to several days depending on the size of your storage Overwrite backup data when the disk is full Clear All Backed up Data Deletes all backed up data on all hard disk drives used in the current backup server e Reconstruct Abnormal Backed up Timetable When the network connection between the backup server and the recording server or DVR is too slow or a hard disk drive in the backup server is damaged the backed up data and the timetable information of the backed up data might not match and the timetable in the Client program might display incorrect information In this situation clicking the button reconstructs the timetable to display backed up data correctly on the timetable in the Client program Overwrite backed up data when the disk is full Checking the box backs up over the oldest video data once all available storage space has been used Storage of a Specific Hard Disk Drive Click the storage to edit in the storage list and then the Modify button at the bottom The Edit Storage window appears Total Sperm TI DL UN Edit Storage ar EM Barked Path D Storage Physical HDD Capacity 219 96
20. p 15 identical to setting it up for recording Refer to the NEX Standard User s Manual for details Select preset Select preset below Add Time Coverage 2009 12 28 Y om py La LE d gt La Repeat Period Day Target Click the Target Setup button and select cameras to back up video Targol Select Al Cert caer as hare 23 User s Manual e Frame start time Set up the time of the first frame of the recorded video to start backup and click the Check button You are required to select a segment if the administration 5 time and date has been reset to a time that is earlier than previously recorded video and there is more than one video segment in the same time range Selecting First starts backup from the first recorded video Summary Backup Backs up only key frames of recorded video It allows backing up recorded data of longer period and makes the backup speed faster but movements might not be smooth when playing back backed up video The key frame frequency is different depending on the encoding and the higher the recording speed the higher the frequency Event Backup Backs up only event based recorded video Select cameras below Displays a list of cameras that have recorded video which can be backed up Selected camera list Displays the list of cameras to be backed up 4 3 Allocating Storage NOTES e USB hard disks network hard
21. rch 1 Event Preferences NEX Setup Event History 1 Report Login Health Logout Status 2 Click the Backup Search tab on the tab panel Selecta device or a camera to connect to from the Site list and drag o and drop it on the Backup Search screen Backed up video from the selected device or camera 1s displayed on the screen You can move a camera screen to the desired location on the Backup Search screen without stopping the current playback while playing back video Select a camera screen and drag and drop it on the desired location System Site Backup Search 1 If a layout is registered on the administration service you can play video in the layout format by selecting a desired layout from the Layout list and dragging and dropping it on the Backup Search screen NOTE The Client system performance might seriously deteriorate when simultaneously monitoring or playing back video with 1280x720 or higher resolution on more than one camera screen 3 A panel toolbar a timetable a control toolbar and a screen menu are provided for playing back backed up video The way to play back backed up video is identical to the way to play back recorded video Refer to the 1NEX Standard User s Manual for details 27 User s Manual 5 2 Exporting Backed up Video You can export backed up video to USB devices Exporting backed up video 1s identical to exporting recorded video R
22. s Ask your dealer or distributor about the number of channels that can be backed up using your iNEX software NOTES e Recording speed and backup speed might decrease when video is backed up while recording It is recommended that you limit the network bandwidth of the backup server properly to minimize the decrease of recording speed Refer to Chapter 4 Recorded Video Backup 4 2 Setting up Backup Schedule p 22 for details about limiting the network bandwidth Backup speed might decrease or some sections of video may not be backed up depending on network conditions or system performance In this case it is recommended that you increase the network bandwidth for the NEX system or upgrade the system specifications tis not supported to back up recorded video saved in DVRs which provide the hour segments timetable and in PC based DVRs Audio may be excluded when backing up recorded video saved in DVRs depending on the specifications and version of the DVR This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org The software included in this product contains some Open Sources You may obtain the complete corresponding source code from us See the Open Source Guide on the software CD OpenSourceGuidel OpenSourceGuide pdf or as a printed document included along with the User s Manual User s Manual 1 1 System Diagram Backup Service Registered on Administration
23. the Information tab 16 INEX Backup setup Backup Servici Lear Address 10 0 110 103 11005 Dascretian 6 Enter the backup service s name and click the Close button User s Manual 18 INEX Backup Chapter 4 Recorded Video Backup You can back up recorded video saved in the recording servers or DVRs First check the following and run the Setup program e Services should be running on the system Refer to the Standard User s Manual for details e There should be recorded data in a recording server or DVR Refer to the INEX Standard User s Manual for details about recording The backup service should be registered on the administration or federation service Refer to 3 2 Registering Backup Service p 11 for details about registering a backup service Adding to Administration Service 1 Go to the Start Menu Click iNEX Run the iNEX Setup program and enter login information S NEX Setup admint 127 0 U 1 2 Select a backup service and click the 4 button at the bottom in the Service menu The Setup Backup Service window appears Select the Site Setup tab User s Manual setup Backup Servici Boop Coverage Time tatus LI Targel Frarne rnan E Carrera list count Total Space Total Space 3 Click the Add button at the bottom The Add Backup Site window appears and a list of available recording services and DVRs is
24. tion about the federation service in the list by clicking button at the right Append Remote Site Site Name Service Address Service Port Designate the on MS name of the federation service and enter the IP address and port m number of the federation server to which the backup service is connected default 11001 Use DVRNS Server Address Server Port User ID Password Enter your user ID and password The default user ID is admin and default password is 12345678 You can change the user ID and password in the User menu Refer to the iNEX Standard User s Manual for details Remember my ID on this computer Check the box if you want to save your ID for logging on D NFX Setup admin 2 Select the Service menu 3 Click the Backup Service and then the button at the bottom The Service Registration window appears User s Manual Service Registration Name Type Ms Backup Service Backup Service 10 0 8 5 11005 Cancel Name Displays backup services that are currently connected to the federation service via the network Type Displays the service type Address Display the IP address and port number of the backup server 4 Select a backup service to register on the federation service and click the OK button D NEX Setup admin gt 5 Select a backup service and click the A button at the bottom The Setup Backup Service window appears Select
Download Pdf Manuals
Related Search