Home

Sharp LC-32D44 user manual Tv User Guide Manual Operating

1. Input signal Normal Zoom Stretch Dot by Dot 4 3 Keeps the original For viewing An image fully fills the Detects the resolution aspect ratio in a full widescreen screen of the signal and screen display programs The top displays an image with and bottom of the the same number of image is cropped pixels on the screen Input signal Stretch Dot by Dot 16 9 An image fully fills the Detects the resolution screen of the signal and displays an image with the same number of pixels on the screen Downloaded From TV Manual com Manuals 16 On Screen Display Menu On Screen Display Menu Operation Example Example o M Picture E Option io Only Input Select Output select Co OPC ao G On gt Backlight 12 16 Contrast 30 0 Brightness 0 30 Caption Setup 0 30 0 30 Program Title Display Game Play Time Sharpness 2 10 Operation Lock Out item displayed in yellow This indicates the item currently selected e Press ENTER to go to the adjustment screen for this item Item in brackets Select GED Enter GID Back CED Exit e This indicates the current setting for the item Item displayed in white e This indicates that the item can be selected The bar above is an operational guide for item displayed in gray the remote control The bar will change in e This indicates that the item cannot be se
2. LIMITED WARRANTY Consumer Electronics Products Congratulations on your purchase Sharp Electronics of Canada Ltd hereinafter called Sharp gives the following express warranty to the first consumer purchaser for this Sharp brand product when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer Sharp warrants that this product is free under normal use and maintenance from any defects in material and workmanship If any such defects should be found in this product within the applicable warranty period Sharp shall at its option repair or replace the product as specified herein This warranty shall not apply to a Any defects caused or repairs required as a result of abusive operation negligence accident improper installation or inappropriate use as outlined in the owner s manual b Any Sharp product tampered with modified adjusted or repaired by any party other than Sharp Sharp s Authorized Service Centres or Sharp s Authorized Servicing Dealers c Damage caused or repairs required as a result of the use with items not specified or approved by Sharp including but not limited to head cleaning tapes and chemical cleaning agents d Any replacement of accessories glassware consumable or peripheral items required through normal use of the product including but not limited to earphones remote controls AC adapter
3. Downloaded From TV Manual com Manuals 17 On Screen Display Menu Adjusts the picture to your preference with the following picture settings Example 9 picture OPC DO On 12 30 Brightness 0 i 9 io Sharpness 2 On Display Backlight 16 Contrast Color Tint Advanced Reset Press MENU to display the MENU screen and then press lt p to select Picture 2 Press 4 to select a specific adjustment item e Select Advanced and then press ENTER to set C M S Hue C M S Saturation Color Temp Active Contrast Film Mode Digital Noise Reduction 3D Y C Monochrome or Range of OPC 3 Press A V or lt p gt to select the desired setting and then press ENTER 4 Press MENU to exit Selected item lt button gt button Backlight The screen dims The screen brightens Contrast For less contrast __ For more contrast Brightness For less For more brightness brightness Color For less color For more color intensity intensity Tint Skin tones Skin tones become reddish become greenish Sharpness For less For more sharpness sharpness e For resetting all Picture adjustment items to the factory preset values press A V to select Reset press ENTER press lt p gt to select Yes and then press ENTER 18 Automatically adjusts the brightness of the screen Off The brightness is fixed at the value set in B
4. Press 4 W to select a specific adjustment item and then press ENTER 3 Press A V or lt p to select the desired setting and then press ENTER 4 Press MENU to exit Audio Setup You can output digital audio to an AV amplifier or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUTPUT terminal on the TV Please select an audio output format compatible with the audio format of the program you are watching and the equipment connected PCM The optical output terminal outputs audio signal in PCM form If your digital audio system does not support Dolby Digital select PCM Dolby Digital The optical output terminal outputs audio signal in Dolby Digital form It reproduces sound from surround program of digital Identification The current version of the TV software is displayed 26 Software Update This function allows software updates by inserting a USB memory device with the update file into the SERVICE terminal on the TV To check for the availability of a software update visit www sharpusa com If you have any questions please call 1 800 BE SHARP 800 237 4277 Do not remove the USB memory device or unplug the AC cord while the software is being updated e Be sure to properly follow the whole procedure described below step by step Otherwise for example the TV cannot read the data in the USB memory device and software updating will fail 1 Insert the USB memo
5. Canadian Rating Systems Canadian English ratings and Canadian French ratings e The TV rating systems in Canada are based on the Canadian Radio Television and Telecommunications Commission CRTC policy on violence in television programming e While violence is the most important content element to be rated the structure developed takes into consideration other program content like language nudity sexuality and mature themes e When setting the V CHIP on the Canadian system you can choose either the Canadian English ratings or the Canadian French ratings E Canadian English Ratings Example MPAA TV Guidelines Can English Ratings Can French Ratings Press A V to adjust the item to your desired position a indicates the item is blocked Press MENU to exit E Exempt Includes news sports documentaries and other information programming talk shows music videos and variety programming C Children Intended for younger children under the age of 8 years Pays careful attention to themes that could threaten their sense of security and well being C8 Children over 8 years old Contains no portrayal of violence as the preferred acceptable or only way to resolve conflict nor encourage children to imitate dangerous acts which they may see on the screen G General Considered acceptable for all age groups Appropriate viewing for the entire family contains very little violence physical verbal or emotional
6. Power Requirement AC 120 V 60 Hz Power Consumption 135 W 0 3 W Standby with AC 120V 165 W 0 3 W Standby with AC 120V Weight TV stand 29 8 Ibs 13 5 kg 35 3 lbs 16 0 kg TV only 25 4 lbs 11 5 kg 30 9 lbs 14 0 kg Dimension W x H x D TV stand 30 9 16 X 22 4 ea X 9 t s inch 35 19 32 X 25 3 32 X 9 1 6 inch TV only 30 Vie X 20 19 32 X 3 5 s4inch 35 9 32 X 23 1 32 X 3 ainch Operating temperature 32 F to 104 F 0 C to 40 C 1 Emergency alert messages via Cable are unreceivable 72 The dimensional drawings are shown on the Spanish operation manual e As part of policy of continuous improvement SHARP reserves the right to make design and specification changes for product improvement without prior notice The performance specification figures indicated are nominal values of production units There may be some deviations from these values in individual units Optional Accesso The listed optional accessory is available for the Liquid Crystal Television Please purchase it at your nearest shop Part name Model number e Additional optional accessories may be available in the near future When purchasing please read the newest catalogue for compatibility and check the availability Downloaded From TV Manual com Manuals 29 Wall mount bracket AN 37AG5 PC Compatibility Chart It is necessary to set the PC co
7. 2 pull down Automatically detects a film based source originally encoded at 24 frames second analyzes it then recreates each still film frame for high definition picture quality On Detects analyzes converts film source Off Normal viewing mode Film Mode does not function when you set the AV Mode to Game e Film Mode is not selectable when channel display shows an input resolution of 480P or 720P Digital Noise Reduction Produces a clearer video image Off No adjustment High For enhanced Digital Noise Reduction Low For moderate Digital Noise Reduction 3D Y C Provides high quality images with minimal dot crawl and cross color noise Slow For still images Standard Normal adjustment Fast For moving images Off 2D For Game Mode e 3D Y C is available for input signal from Composite Video and analog broadcasts air and cable Monochrome For viewing a video in monochrome On For viewing in monochrome Off Normal color Range of OPC The brightness level range of the OPC sensor s automatic adjustments can be set according to your preferences The adjustment range of the OPC sensor can be set to a maximum of 16 and a minimum of 16 Max 15 through 16 Min 16 through 15 e The range of OPC settings are active only when the OPC is set to On e The maximum setting cannot be set to a smaller number than the minimum setting e The minimum setting cannot be set to a bigger num
8. Language Reset 1 Press MENU to display the MENU screen and then press lt p to select Setup 2 Press 4 to select a specific adjustment item and then press ENTER e When you select EZ Setup CH Setup Parental CTRL and Reset you can enter the 4 digit secret number here See page 22 for setting a secret number 3 Press A V or lt p to select the desired setting and then press ENTER 4 Press You can run EZ Setup again even after setting up the preset channels Language Select from among 3 languages English French and Spanish TV Location Select Home or Store for the location where you plan to install the TV e If you select Home AV MODE is set to STANDARD e If you select Store AV MODE is set to DYNAMIC Fixed In case no remote control signal is received within 30 minutes AV MODE will change to DYNAMIC Fixed automatically Air Cable Make sure what kind of connection is made with your TV when selecting Air or Cable CH Search Channel auto search makes the TV look for all channels viewable in the set area e See Initial Setup on page 12 for setting each item e If no channel is found confirm the type of connection made with your TV and try EZ Setup again e If you select Analog Search Start and initiate the channel search the CH Memory for Cable Digital will be deleted If initial setup does not memorize all the channels in your region follow the instructions below to man
9. PG Parental Guidance Intended for a general audience but may not be suitable for younger children under the age of 8 because it could contain controversial themes or issues 14 Over 14 years Could contain themes where violence is one of the dominant elements of the storyline but it must be integral to the development of plot or character Language usage could be profane and nudity present within the context of the theme 18 Adults Intended for viewers 18 years and older and might contain depictions of violence which while related to the development of plot character or themes are intended for adult viewing Could contain graphic language and portrayals of sex and nudity Downloaded From TV Manual com Manuals On Screen Display Menu E Canadian French Ratings Example MPAA TV Guidelines E Can English Ratings G Can French Ratings Bans 13ans 16ans 18ans NONE Press A V to adjust the item to your desired position a indicates the item is blocked Press MENU to exit E Exempt programming G General All ages and children contains minimal direct violence but may be integrated into the plot in a humorous or unrealistic manner 8ans General but inadvisable for young children May be viewed by a wide public audience but could contain scenes disturbing to children under 8 who cannot distinguish between imaginary and real situations Recommended for viewing with parent 13ans Over 13
10. and televisions use shielded cables and connectors for connections Printed in Mexico Downloaded From TV Manual com Manuals TINS D610WJZZA 2 08P02 MX NM IMPORTANT INFORMATION DECLARATION OF CONFORMITY SHARP LIQUID CRYSTAL TELEVISION MODEL LC 32D44U LC 37D44U This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation RESPONSIBLE PARTY SHARP ELECTRONICS CORPORATION Sharp Plaza Mahwah New Jersey 07430 2135 TEL 1 800 BE SHARP For Business Customers URL http www sharpusa com INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interfe
11. be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal e To prevent fire never place any type of candle or flames on the top or near the TV set e To prevent fire or shock hazard do not place the AC cord under the TV set or other heavy items e Do not display a still picture for a long time as this could cause an afterimage to remain e To prevent fire or shock hazard do not expose this product to dripping or splashing No objects filled with liquids such as vases should be placed on the product Precautions when transporting the TV e Be sure to always carry the TV by two people holding it with two hands one hand on each side of the TV Downloaded From TV Manual com Manuals 5 QUICK REFERENCE Attaching Detaching the Stand Before attaching or detaching the stand unplug the AC cord from the AC INPUT terminal e Before performing work spread cushioning over the base area to lay the TV on This will prevent it from being e This TV should be mounted on the wall only with the AN 37AG5 SHARP wall mount bracket The use of other wall mount brackets may result in an unstable damaged installation and may cause serious injuries CAUTION e Insta
12. brightness type of program watched or the type of image input from external equipment Press AV MODE Current AV MODE displays e Press AV MODE again before the mode displayed on the screen disappears The mode changes as shown below Example When the input source is TV INPUT 1 2 or 3 terminals STANDARD MOVIE GAME USER TV DYNAMIC DYNAMIC Fixed Example When the input source is INPUT 4 5 or 6 terminals STANDARD MOVIE Sa ee DYNAMIC DYNAMIC Fixed USER a STANDARD For a highly defined image in a normal ighting Enhanced Picture Contrast on MOVIE For a movie Enhanced Picture Contrast off GAME Lowers image brightness Enhanced Picture Contrast off PC For PC Enhanced Picture Contrast off USER Allows the user to customize settings as desired You can set the mode for each input source Enhanced Picture Contrast off DYNAMIC Fixed Changes the image and sound settings to the factory preset values No adjustments are allowed Enhanced Picture Contrast on DYNAMIC For a clear cut image emphasizing high contrast useful for sports viewing Enhanced Picture Contrast on or easier viewing e You can select a different AV MODE item for each input mode For example select STANDARD for TV input and DYNAMIC for INPUT 1 e When you play games GAME is recommended for AV ODE e Enhanced Picture Contrast technology detects the source video characteristics and smoothly a
13. control unit See page 12 If the indicator on the TV does not light up press POWER on the TV s the AC cord disconnected See page 7 Has the power been turned on See page 12 e Unit cannot be operated External influences such as lightning static electricity may cause improper operation n this case operate the unit after first turning off the power of the TV or unplugging the AC cord and replugging it in after 1 or 2 minutes e Remote control unit does not Are batteries inserted with polarity aligned See page 8 operate Are batteries worn out Replace with new batteries Are you using it under strong or fluorescent lighting s a fluorescent light illuminated near the remote control sensor e Picture is cut off with sidebar e Is the image position correct See page 21 screen e Are screen mode adjustments such as picture size made correctly See page 16 e Strange color light color or color Adjust the picture tone See pages 18 and 19 misalignment e Is the room too bright The picture may look dark in a room that is too bright e Check the input signal setting See page 21 Power is suddenly turned off Is the sleep timer set See page 13 e Check the power control settings See page 20 e The unit s internal temperature has increased Remove any objects blocking vent or clean e No picture is connection to other components correct See page 11 s correct input signal source selecte
14. currently appears in parentheses e g 1 3 CC1 being viewed Closed Caption services that appear in parentheses will not be stored in the CC button s memory as your last selected service Only services that you have selected with the CC button are stored Examples In a case where there are two closed caption services provided for instance Digital CC ENG and CC1 and Digital CC ENG is displayed as your current selection if Digital CC ENG is not broadcast for the next program the other closed caption service CC1 will be displayed in parentheses A closed caption service appears in parentheses because the service you selected is not available and a different service is displayed on your screen 1 1 CC1 is displayed instead of 1 2 ENG e See page 25 for detailed closed caption settings e When the program contains no closed caption displays in the closed caption information e If the language code e g ENG is not found on Digital TV programs will be shown e Four kinds of closed caption service CC1 CC2 Text1 Text2 are potentially available but a broadcast may contain none or only some of these services at the discretion of the program provider Downloaded From TV Manual com Manuals 15 Direct Button Operation VIEW MODE You can select the screen size 1 Press VIEW MODE e The View Mode menu displays e The menu lists the View Mode options selectable for the type
15. part Unauthorized substitutions may result in fire electric shock or other hazards 20 Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in proper operating condition 21 Wall or ceiling mounting When mounting the product on a wall or ceiling be sure to install the product IMPORTANT SAFETY INSTRUCTIONS e Outdoor Antenna Grounding If an outside antenna is EXAMPLE OF ANTENNA GROUNDING AS PER connected to the television equipment be sure the antenna NATIONAL ELECTRICAL CODE ANSI NFPA 70 system is grounded so as to provide some protection against voltage surges and built up static charges ANTERA pe Article 810 of the National Electrical Code ANSI NFPA 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire GROUND E ANTENNA to an antenna discharge unit size of grounding conductors GEME DISCHARGE UNIT location of antenna discharge unit connection to grounding NEC SECTION 810 20 electrodes and requirements for the grounding electrode ELECTRIC SERVICE GROUNDING EQUIPMENT CONDUCTORS NEC SECTION 810 21 GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H NEC NATIONAL ELECTRICAL CODE e Turn off the main power and unplug the AC cord from the wall outlet before handling e Use a soft clot
16. shock to persons CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK The exclamation point within a DO NOT REMOVE COVER OR BACK triangle is intended to alert the NO USER SERVICEABLE PARTS INSIDE user to the presence of important REFER SERVICING TO QUALIFIED SERVICE operating and maintenance PERSONNEL servicing instructions in the literature accompanying the product CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT CAUTION DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART STAND TRIPOD BRACKET OR TABLE THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT USE ONLY WITH A CART STAND TRIPOD BRACKET OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT FOLLOW THE MANUFACTURER S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES RECOMMENDED BY THE MANUFACTURER A PRODUCT AND CART COMBINATION SHOULD BE MOVED WITH CARE QUICK STOPS EXCESSIVE FORCE AND UNEVEN SURFACES MAY CAUSE THE PRODUCT AND CART COMBINATION TO OVERTURN WARNING FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user s authority to operate this equipment CAUTION This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment To prevent electromagnetic interference with electric appliances such as radios
17. years Could contain scenes of frequent violent scenes and therefore recommended for viewing with parent 16ans Over 16 years Could contain frequent violent scenes and intense violence 18ans Over 18 years Only for adult viewing Could contain frequent violent scenes and extreme violence How to temporarily release the V CHIP BLOCK When the V CHIP BLOCK is working and censors a broadcast V CHIP HAS BEEN ACTIVATED displays 1 Press ENTER while the V CHIP is working and then the secret number setting menu displays 2 Input the 4 digit secret number by using 0 9 At this time V CHIP BLOCK temporarily releases E Reactivating the temporarily released V CHIP BLOCK You can reactivate the temporarily released V CHIP BLOCK as shown below e Select Status setting from the Parental CTRL menu to reactivate BLOCK See page 22 e Select V Chip setting MPAA TV Guidelines Can English Ratings or Can French Ratings from the Parental CTRL to reactivate BLOCK See pages 22 and 23 e Switch off the TV power e Performing any of the three above will activate the V CHIP BLOCK 24 Option Menu Example g Option Audio Only Output Select Fixed Caption Setup Digital Caption Info Program Title Display Favorite CH Game Play Time Operation Lock Out 1 Press MENU to display the MENU screen and then press lt gt to select Option 2 Press a to select a specific ad
18. Crystal panel to malfunction Storage temperature 4 F to 140 F 20 C to 60 C Downloaded From TV Manual com Manuals 28 Appendix Model LC 32D44U Model LC 37D44U LCD panel 32 screen size class Advanced Super View amp BLACK TFT LCD Diagonal Measurement 31 1 2 37 screen size class Advanced Super View amp BLACK TFT LCD Diagonal Measurement 37 Resolution 1 049 088 pixels 1 366 x 768 TV standard CCIR American TV Standard ATSC NTSC System TV Receiving Channel Function VHF UHF VHF 2 13ch UHF 14 69ch CATV 1 135ch non scrambled channel only Digital Terrestrial Broadcast 8VSB 2 69ch Digital cable 64 256 QAM 1 135ch non scrambled channel only Itiplex BTSC System Backlight 60 000 hours at Backlight Standard position Audio out 10W x 2 Terminals PUT 1 AV in COMPONENT in PUT 2 AV in S VIDEO in PUT 3 COMPONENT in PUT 4 HDMI in with HDCP PUT 5 Audio in HDMI in with HDCP IN IN IN IN IN IN PUT 6 15 pin mini D sub female connector Audio in 3 5 mm jack ANT CABLE 75 Q Unbalance F Type x 1 for Analog VHF UHF CATV and Digital AIR CABLE IGITAL AUDIO OUTPUT Optical Digital audio output x 1 PCM Dolby Digital OUTPUT Audio out SERVICE Software update OSD language English French Spanish
19. IP feature in your TV V Chip and Status will not be selectable from the menu if you do not first configure your secret number e The U S has two rating systems for viewing content TV Parental Guidelines and movie ratings e The TV Parental Guidelines work in conjunction with the V CHIP to help parents screen out inappropriate television shows from their children e Movie ratings are used for original movies rated by the Motion Picture Association of America MPAA as watched on cable TV and not edited for television The V CHIP can also be set to block MPAA rated movies NOTE e The setting automatically enters Block for any ratings below your selection e If Status is not set to On the configuration settings will not work E MPAA Voluntary movie rating system Example MPAA TV Guidelines Can English Ratings Can French Ratings Press A V to adjust the item to your desired position a indicates the item is blocked Press MENU to exit G General audiences All ages admitted PG Parental guidance suggested Some material may not be suitable for children PG 13 Parents strongly cautioned Some material may be inappropriate for children under 13 R Restricted Under 17 requires accompanying parent or adult guardian age varies in some jurisdictions NC 17 No one 17 and under admitted X X is an older rating that is unified with NC 17 but may be encoded in the data of older movies e Volunta
20. ONO and STEREO In addition it is possible for multiple audio tracks to accompany a single video track Press AUDIO to toggle between audio modes Example when receiving Digital broadcasting STEREO Audio1 STEREO Audio2 tee SURROUND Audio3 e MTS only operates while in TV mode Press FLASHBACK to switch to the previously tuned channel e Press FLASHBACK again to switch back to the currently tuned channel e FLASHBACK will not work if no channel has been changed after the TV is turned on Downloaded From TV Manual com Manuals Direct Button Operation Closed Captions and Digital Closed Captions Your TV is equipped with an internal Closed Caption 1 Press CC decoder It allows you to view conversations narration e This will present the Closed Caption information and sound effects as subtitles on your TV Closed display Captions are available on some TV programs and on some VHS home video tapes at the discretion of the 2 Press CC while the Closed Caption information is program provider still on the screen e Press repeatedly until you select the desired closed Digital Closed Caption service is a new caption service caption service available only on digital TV programs also at the discretion of the service provider It is a more flexible i ANALOG system than the original Closed Caption system because it allows for a variety of caption sizes and font 2 styles When the Digital Closed Caption service
21. SHARP AQUOS LC 32D44U LC 37D44U LIQUID CRYSTAL TELEVISION OPERATION MANUAL ENGLISH BA k GDW ppa HAMI BIALA ee ene ee ee net ee NOM 1245 i waa o The examples used throughout this manual are based on the LC 32D44U model Supplied Accessories Make sure the following accessories are provided with the product LC 32D44U Remote control unit AA size battery AC cord Cable clamp Stand unit Operation manual x1 x1 x1 Page 7 e Always use the AC cord supplied with the TV To avoid scratching the frame or screen please use a soft lint free cloth for cleaning Approved cleaning cloths are available directly from Sharp in single 00Z LCD CLOTH or triple 00Z LCD CLOTH 3 packs Call 1 800 BE SHARP for ordering or VISIT www sharpusa com SharpDirect IMPORTANT To aid reporting in case of loss or theft please record the TV s model and serial numbers in the space Serial No provided The numbers are located at the rear of the TV IMPORTANT INFORMATION WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE Model No The lightning flash with arrow head symbol within an equilateral o7 Ou nle triangle is intended to alert the RISK OF ELECTRIC SHOCK user tothe pices ce ol DO NOT OPEN uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric
22. Select a desired item on the screen 10 EXIT Turn off the menu screen 11 DISPLAY Display the channel information 12 SLEEP Set the sleep timer See page 13 13 AV MODE Select an audio or video setting When the input source is TV INPUT 1 2 or 3 STANDARD MOVIE GAME USER DYNAMIC Fixed DYNAMIC When the input source is INPUT 4 5 or 6 STANDARD MOVIE GAME PC USER DYNAMIC Fixed DYNAMIC See page 14 14 MUTE Mute the sound See page 13 15 VOL Set the volume See page 13 16 CH V Select the channel See page 13 17 ENT Jumps to a channel after selecting with the 0 9 buttons 18 INPUT Select a TV input source TV INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT 5 INPUT 6 See page 13 19 PC Quickly access to PC mode 20 MENU Display the menu screen 21 RETURN Return to the previous menu screen 22 FAVORITE CH A B C D Select 4 preset favorite channels in 4 different categories See page 25 While watching you can toggle the selected channels by pressing A B C and D e When using the remote control unit point it at the TV Downloaded From TV Manual com Manuals 10 Connecting to External Equipment You can connect many types of external equipment to your TV like a Blu ray disc player HD DVD player DVD player VCR Digital TV tuner HDMI equipment game console or camcorder To view external source images select the input source from INPUT on the remote contro
23. T 6 PC IN RGB cable commercially available j ilig Q 3 5 mm stereo minijack cable commercially available INPUT 4 or 5 HDMlI certified cable commercially available grl uut HH e The HDMI terminals only support digital signal e Refer to page 30 for a list of PC signals compatible with the TV Downloaded From TV Manual com Manuals 11 Watching TV Press POWER on the TV or on the remote control unit to turn the power on e POWER indicator Green The TV is on After a few seconds a window appears with sound POWER e The initial setup starts when the TV powers on for the first time If the TV has been turned on before the EZ Setup will not be invoked See page 20 for performing EZ Setup from the Setup menu Press POWER on the TV or on the remote control unit again to turn the PONEY anu sieer aooe ae power off amp OOO Or Standby e The TV enters standby and the image on the screen disappears D X aio wie e The POWER indicator on the TV tums off OO 0 e If you are not going to use this TV for a long period of time be sure to remove the AC cord from the AC outlet e Weak electric power is still consumed even when the TV is turned off yo VOCHA INPUT MENU POWER co O O Initial Setup When you turn on the TV for the first time it will Air Cable Antenna setting automatically memorize the bro
24. acklight On Automatically adjusts On Display Displays the OPC effect on the screen while adjusting the brightness of the screen e When set to On the OPC senses the surrounding light and automatically adjusts the backlight brightness Make sure nothing obstructs the OPC sensor which could affect its ability to sense surrounding light When set to On Display OPC effect displays on the screen while the OPC adjusts the screen brightness When set to On or On Display the OPC indicator on the TV lights green Advanced Picture Setting This TV provides various advanced functions for optimizing the picture quality C M S Color Management System Color tone is managed using the six color adjustment setting C M S Hue This is a standard to adjust the color either more reddish or more bluish in tone C M S Saturation Increases or decreases the saturation of a selected color e For resetting all adjustment items to the factory preset values press 4 to select Reset and then press ENTER Color Temp Color Temperature For a better white balance use color temperature correction High White with bluish tone Mid High Middle f Mid Low Low White with reddish tone Active Contrast Automatically adjusts the image contrast according to the scene On Automatically adjusts the image contrast Off No adjustment Downloaded From TV Manual com Manuals On Screen Display Menu Film Mode 3
25. adcasting channels Make sure what kind of connection is made with your TV available in the region where you live Perform the when selecting Air or Cable following steps before you press POWER on the 3 Press lt p to select Air or Cable remote control unit Press ENTER to enter the setting 1 Insert the batteries into the remote control unit See page 8 Example 2 Connect the antenna cable to the TV See page 8 3 Plug in the AC cord to the AC outlet See page 7 FREEZE MENU CH Search Channel search K Channel auto search makes the TV look for all channels Language Language setting viewable in the set area Select from among 3 languages English French and Spanish 4 When Air is selected in Antenna setting 1 Press 4 to select the desired language listed on the Press lt q p to select Start and then press ENTER screen and then press ENTER Language TV Location Air Cable CH Search Cancel When Cable is selected in Antenna setting TV Location Press A to select Analog amp Digital Search Start to Select Home or Store for the location where you plan to search both analog and digital broadcasts or to select install the TV Analog Search Start to search only analog broadcasts 2 Press lt gt to select Home or Store and then press ENTER Press ENTER to enter the setting Language Example TV Location Air Cable Analog amp Digital Search Start CH Search Analog Sear
26. ation within a few seconds Changing Volume You can change the volume by pressing VOL on the TV or on the remote control unit e To increase the volume press VOL e To decrease the volume press VOL Audio status Output Select Fixed Variable Variable sound Mute e When Output Select is set to Variable the indicator on the screen changes as shown below Output device Speaker e See page 25 for details on the Output Select function 13 MUTE Mutes the current sound output Press MUTE e c4 will be displayed on the screen for 30 minutes and the sound is silenced e Within 30 minutes of pressing MUTE mute can be canceled by using one of the methods below Mute will be canceled if you press VOL or MUTE e Mute will be canceled after 30 minutes have passed However the TV will not suddenly output a loud sound as the volume level is set to 0 automatically Sleep Timer Allows you to set a time when the TV automatically switches to standby Press SLEEP e The remaining time displays when the sleep timer has been set e Each time you press SLEEP the remaining time switches as shown below Off gt 30 gt 60 gt 90 gt 120 fe e When set the time automatically starts counting down e If you want to adjust the sleep timer you can press SLEEP twice then change the time setting e Five minutes before the time expires the remaining time displays every
27. be selectable when anew rating system can be downloaded via digital broadcasting in the U S 3 Status is set to On E New Secret No You can set and change the secret number by using 0 9 Input Secret No When you change the secret number enter the old 4 digit secret number here The cursor moves to New Secret No New Secret No When you set the new secret number enter the new 4 digit secret number here The cursor moves to Reconfirm Reconfirm Enter the same 4 digit number you set in New Secret No E Secret No Clear You can clear your secret number Yes Your secret number is cleared No Your secret number is not cleared e As a precautionary measure make a note of your secret number and keep it in a familiar place e If the secret number is cleared the Status setting automatically sets to Off V Chip and Status will not be selectable from the menu Status Used to enable or disable the parental control function This function will not be selectable from the menu if you do not first configure your secret number On Enables Parental CTRL Off Disables Parental CTRL 22 V Chip V CHIP is an electronic filtering device built into your TV This tool gives parents a great degree of control over broadcasts accessed by their children It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable It does so automatically once you activate the V CH
28. ber than the maximum setting e Depending on the brightness of the surrounding light the OPC sensor might not operate if the adjustment range is small 19 io Menu You can adjust the sound quality to your preference with the following settings Example 6 Audio 15 OOOO 15 15 el 15 a FR Of On Treble 0 0 0 Bass Balance Surround Bass Enhancer Reset Press MENU to display the MENU screen and then press lt q p to select Audio Press A to select a specific adjustment item e Select Surround or Bass Enhancer and then press ENTER to set each item Press A V or lt p gt to select the desired setting and then press ENTER Press MENU to exit lt button N A Q Selected item gt button Treble For weaker treble For stronger treble Bass For weaker bass For stronger bass Balance Decrease audio from Decrease audio from the right speaker the left speaker e Audio menu is grayed out when Output Select is set to Variable e For resetting all Audio adjustment items to the factory preset values press A V to select Reset press ENTER press lt q p to select Yes and then press ENTER Surround function allows you to enjoy realistic live sound On Surround function is on Off Normal sound e Audio menu is grayed out when Output Select is set to Variable e For some discs setup may be required on your DVD pla
29. ch Start Cancel e The Channel search will start automatically e To exit the Channel search screen select Cancel and then press ENTER NOTE e If you select Home AV MODE is set to STANDARD e If you select Store AV MODE is set to DYNAMIC Fixed If no channel is found confirm the type of connection made In case no remote control signal is received within 30 minutes with your TV and try EZ Setup again AV MODE will change to DYNAMIC Fixed automatically See page 20 or com TV Wantial Com Manuals Waters Direct Button Operation POWER DISPLAY SLEEP AV MODE cC 000 AUDIO MUTE g E INPUT 0000 FLASHBACK VIEWMODE PC FREEZE MENU g Channels You can change channels by pressing CHA V or 0 9 e DOT Examples To select a 1 or 2 digit channel number e g Channel 5 Press 5 gt ENT To select a 3 digit channel number e g Channel 115 Press 1 1 gt 5 gt ENT To select a 4 digit channel number e g Channel 22 1 Press 2 2 e DOT 1 SENT e When selecting a 1 digit channel number it is not necessary to press 0 before the number e When you enter 0 9 only channel selection will be made if there is no operation within a few seconds e If you push 0 by itself nothing will happen Complete the above steps within a few seconds e When you enter 0 9 and DOT channel selection will be made if there is no oper
30. d after connection See page 25 s the correct input selected See page 25 s picture adjustment correct See pages 18 and 19 s On selected in Audio Only See page 24 Is anon compatible signal being input See page 30 e No sound s the volume too low See page 13 s Variable selected in Output Select See page 25 Have you pressed MUTE on the remote control unit See page 13 The TV sometimes makes a e This is not a malfunction This happens when the cabinet slightly expands and cracking sound contracts according to change in temperature This does not affect the TV s performance Troubleshooting tal Broadcasting The error message about reception of broadcast The example of an error message displayed on a screen e Failed to receive broadcast exe le the antenna cable Check that the antenna is correctly e No broadcast now e Check the broadcast time in the program guide Error code Possible Solution Cautions regarding use in high and low temperature environments e When the unit is used in a low temperature space e g room office the picture may leave trails or appear slightly delayed This is not a malfunction and the unit will recover when the temperature returns to normal e Do not leave the unit in a hot or cold location Also do not leave the unit in a location exposed to direct sunlight or near a heater as this may cause the cabinet to deform and the Liquid
31. djusts the screen brightness accordingly to realize deeper black levels 14 E MTS SAP stereo mode The TV has a feature that allows reception of sound other than the main audio for the program This feature is called Multi channel Television Sound MTS The TV with MTS can receive mono sound stereo sound and Secondary Audio Programs SAP The SAP feature allows a TV station to broadcast other information which could be audio in another language or something completely different like weather information You can enjoy Hi Fi stereo sound or SAP broadcasts where available e Stereo broadcasts View programs like live sporting events shows and concerts in dynamic stereo sound e SAP broadcasts Receive TV broadcasts in either MAIN or SAP sound MAIN sound The normal program soundtrack either in mono or stereo SAP sound Listen to a second language supplementary commentary or other information SAP is mono sound If stereo sound is difficult to hear e Obtain a clearer sound by manually switching to fixed mono sound mode You can change MTS as shown below to match the television broadcast signal Press AUDIO to toggle between audio modes Examples when receiving MTS and SAP STEREO mode STEREO MONO STEREO SAP mode ST SAP SAP ST MONO a MAIN SAP mode MAIN SAP MONO mode MONO E Digital broadcasting audio mode The types of audio transmitted in a digital broadcast include SURROUND as well as M
32. e TV e TV angle cannot be adjusted Using the Remote Control Unit Use the remote control unit by pointing it towards the remote control sensor on the TV Objects between the remote control unit and the remote control sensor may prevent proper operation J E Cautions regarding the remote control unit e Do not expose the remote control unit to shock In addition do not expose the remote control unit to liquids and do not place in an area with high humidity Do not install or place the remote control unit under direct sunlight The heat may cause deformation of the remote control unit The remote control unit may not work properly if the remote control sensor on the TV is under direct sunlight or strong lighting In such cases change the angle of the lighting or the TV or operate the remote control unit closer to the 30 30 remote control sensor gt l IMPORTANT The POWER indicator on the AQUOS television should light GREEN indicating you have power to the AQUOS television If the POWER indicator on the AQUOS television still does not light up press POWER on the remote control to turn the power on IMPORTANT IF THE UNIT DOES NOT POWER ON UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS IF YOU STILL ENCOUNTER NO POWER PLEASE CONTACT US AT 1 800 BE SHARP POWER SLEEP OPC 176m Downloaded From TV Manual com Manuals 7 Preparation To enjoy a clearer
33. etting allows you to skip the HDMI or PC IN Input Input 4 HDMI Input 5 HDMI and Input 6 RGB on the Input Selection operation Yes Skips the input No Does not skip input Input Signal for Analog PC Input Mode Only Some input signals may have to be registered manually to display properly The pair of input signals resolutions in the list below is not distinguishable when received In such a case you have to set the correct signal manually After setting once it will display when the same signal resolution is input again 1024 x 768 1360 x 768 NOTE e You can only select the Input Signal on the Setup menu when receiving one of the 2 input signals listed above Auto Sync for Analog PC Input Mode Only For automatically adjusting the PC image Yes Auto Sync starts and Now adjusting the image displays No This function does not work mB e When Auto Sync is successful Completed displays If not Auto Sync failed e Auto Sync may fail even if Completed displays e Auto Sync may fail if the computer image has low resolution has unclear black edges or is moved while executing Auto Sync e Be sure to connect the PC to the TV and switch it on before starting Auto Sync Fine Sync Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync In some cases however manual adjustment is needed to optimize the image H Pos Centers t
34. f any complex or non standard installation mounting or other encumbrance which would unreasonably interfere with servicing the Product The Servicer will remount the Product after service provided that such remounting is not into a complex or non standard installation Any additional labor and materials required to remove and or reinstall a Product above and beyond the foregoing are not covered by this warranty may result in additional charges and are the responsibility of the consumer Image Retention resulting from a fixed image being displayed for long periods of time is not covered by this Limited Warranty see Operation Manual on how to prevent this Where to Obtain Service From a Sharp Authorized Servicer located in the United States To find the location of the nearest Sharp Authorized Servicer please call Sharp toll free at 1 800 BE SHARP What to do to Obtain Service Contact your Sharp Authorized Servicer to obtain in home service for this product The Servicer will come to your location and if necessary remove the unit for repair at the Servicer s facility and return the set to you once completed Be sure to have Proof of Purchase available TO OBTAIN PRODUCT INFORMATION OR PURCHASE ACCESSORIES AND EXTENDED WARRANTIES CALL 1 800 BE SHARP OR VISIT www sharpusa com SHARP SHARP ELECTRONICS CORPORATION Sharp Plaza Mahwah New Jersey 07430 2135 Downloaded From TV Man il ENN Maide ORATION 31 VALID IN CANADA ONLY SH A RP
35. h 6 0 mm above Hakaj the A position screws Refer to the operation Uae manual of AN 37AG5 for ae 7 details Soft cushion e Detach the cable clamp on the rear of the TV when using the optional mount bracket e Due to the terminal configuration on this TV when you wall mount this model make sure there is enough space between the wall and the TV for the cables e To use this TV mounted on a wall first remove the adhesive tape at the 4 locations on the rear of the TV and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV Dowd eetete thelstendy pein ng steps injreverseoftanuals 6 QUICK REFERENCE QUICK INSTALLATION TIPS q Attach your antenna to the back of the AQUOS 3 Bundle the cords properly with the cable clamp television See page 8 2 Connect the AC plug for the AQUOS television into the AC outlet AS LC 32D44U LC 37D44U 4 How to tum on the AQUOS television for the first time A Press POWER on the AQUOS television coo o O O E rown B The POWER indicator on the front of the e Place the TV close to the AC outlet and keep the power AQUOS television lights GREEN plug within reach Oo o o Li POWER TO PREVENT RISK OF ELECTRIC SHOCK DO NOT indicator TOUCH UN INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED J e Speakers cannot be detached from th
36. h and gently wipe the surface of the display panel Using a hard cloth may scratch the panel surface Use a soft damp cloth to gently wipe the panel when it is really dirty It may scratch the panel surface when wiped strongly e If the panel is dusty use an anti static brush which is commercially available to clean it e To protect the panel do not use a dirty cloth liquid cleaners or chemical cloth to clean it such materials may damage the panel surface e To clean the outer cabinet use the same method Do not use liquid or aerosol cleaners Water and Moisture Do not use this product near water for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like e Stand Do not place the product on an unstable cart stand tripod or table Placing the product on an unstable base can cause the product to fall resulting in serious personal injuries as well as damage to the product Use only a cart stand tripod bracket or table recommended by the manufacturer or sold with the product When mounting the product on a wall be sure to follow the manufacturer s instructions Use only the mounting hardware recommended by the manufacturer e Selecting the location Select a place with no direct sunlight and good ventilation e Ventilation The vents and other openings in the cabinet are designed for ventilation Do not cover or block the
37. h one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Additional Safety Information 15 Power Sources This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your product dealer or local power company For products intended to operate from battery power or
38. he image by moving it to the left or right V Pos Centers the image by moving it up or down Clock Adjust when the image flickers with vertical stripes Phase Adjust when characters have low contrast or when the image flickers e For resetting all Fine Sync adjustment items to the factory preset values press 4 W to select Reset and then press ENTER e Itis not necessary to adjust the Clock or Phase when a digital signal is being input so it cannot be selected e The default cursor position may not be in the center because the screen position variable ranges may be asymmetrical e The screen position variable ranges depend on the View Mode or the signal type The ranges can be seen on the position setting screen Input Label Lets you set the input terminal displayed when using the INPUT SOURCE menu or channel display Press A YV lt 4 p to select the new name for the input mode e You cannot change labels if the INPUT SOURCE is TV For adjusting a picture s horizontal and vertical position H Pos Centers the image by moving it to the left or right V Pos Centers the image by moving it up or down e For resetting adjustments to the factory preset values press A V to select Reset and then press ENTER e When connecting a PC to the HDMI terminal the image position will be automatically adjusted It cannot be manually adjusted e The screen position variable ranges depend on the View Mode or the signal ty
39. hese include software components covered by a GNU General Public License hereafter GPL a GNU Lesser General Public License hereafter LGPL or other license agreement E Obtaining source code Some of the open source software licensors require the distributor to provide the source code with the executable software components GPL and LGPL include similar requirements For information on obtaining the source code for the open source software and for obtaining the GPL LGPL and other license agreement information visit the following website http www sharpusa com gpl We are unable to answer any questions about the source code for the open source software The source code for the software components whose copyrights are held by SHARP is not distributed E Acknowledgements The following open source software components are included in this product e linux kernel busybox uClibc zlib lippng libjpeg CLEARING THE SECRET NUMBER If you forget the secret number clear the secret number using the following procedure q Press MENU to display the MENU screen and then press lt p gt to select Setup 2 Press A F to select EZ Setup CH Setup Parental CTRL Reset Color System or Software Update and the Secret number input screen displays 3 gt Press and hold both CHA and VOL on the TV simultaneously until the message appears on the screen The secret number is ARRE e As a precautionary
40. ies available to cover your use of this Product the terms of which may vary Please contact 1 888 GO SHARP for further information In order to enforce your rights under this limited warranty you should follow the steps set forth below You must be able to provide proof of purchase to the servicer which proof must include the date of purchase To the extent permitted by applicable state law the warranties set forth are in lieu of and exclusive of all other warranties express or implied Specifically ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY FITNESS FOR USE AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED IF UNDER APPLICABLE STATE LAW IMPLIED WARRANTIES MAY NOT VALIDLY BE DISCLAIMED OR EXCLUDED THE DURATION OF SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD S FROM THE DATE OF PURCHASE SET FORTH BELOW THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser and only for the time periods set forth herein No other representations or promises made by anyone are permitted Correction of defects in the manner and for the period of time described herein shall constitute complete fulfillment of all liabilities and responsib
41. ile to the USB memory device and retry software update There is more than one software file in the USB memory device Confirm that only the software update file is in the USB memory device 27 7 Press ENTER to start updating e The screen becomes dark for a while until the update screen can be displayed Please wait for the update screen to appear Do not unplug the AC cord The picture will temporarily go dark until the Software Update display appears Wait several minutes and do not unplug the AC cord Now updating Do not unplug AC cord UXXXXXX2 Update Version Do not remove the USB memory device or unplug the AC cord while the software is being updated 8 When the software is successfully updated a screen is displayed indicating that the update process is completed After this screen is displayed the TV automatically turns off and then turns on again Example Software update is complete UXXXXXX2 Update Version e If the update has failed check the file in the USB memory device and try Software Update again Failed to complete update Retry Software Update If system Update fails again contact the customer service center 9 After the screen shown below is displayed press ENTER System software was successfully updated Remove the USB memory device 10 Remove the USB memory device Appendix Troubleshooting e No power e Check if you pressed POWER on the remote
42. ilities of Sharp to the purchaser with respect to the Product and shall constitute full satisfaction of all claims whether based on contract negligence strict liability or otherwise Sharp does not warrant nor shall Sharp be liable or in any way responsible for Products which have been subject to abuse including but not limited to improper voltage accident misuse negligence lack of reasonable care alteration modification tampering misuse improper operation or maintenance or any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer Nor shall Sharp be liable or in any way responsible for any incidental or consequen tial economic or property damage Some states do not allow limits on warranties or on remedies for breach in certain transactions in such states the limits herein may not apply THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY 50 UNITED STATES THE DISTRICT OF COLUMBIA AND PUERTO RICO Model Specific Section Your Product Model Number amp Description LC 32D44U LC 37D44U LCD Color Television Be sure to have this information available when you need service for your Product Warranty Period for this Produc One 1 year parts and labor from the date of purchase Additional Exclusions from In order for the Product to be serviced the Product must be readily available to the Warranty Coverage if an servicer free and clear o
43. inal is adjusted with VOL on the remote control unit or VOL on the TV Sound via speaker is muted Color System Select the video signal system compatible with your equipment from the list below Auto NTSC PAL M PAL N tmp e Color System can only be set for the INPUT 1 VIDEO and INPUT 2 e If you have already set the Secret No input the 4 digit secret number here See page 22 for setting a secret number 25 Caption Setup This function allows you to adjust the closed caption screen appearance to suit your preference You can adjust 7 items Caption Size Font Style Foreground Color Foreground Opacity Background Color Background Opacity and Character Edge Example Selectable items available for Font Style Default The font specified by broadcasting station or default font Type 0 Proportional font used in the MENU screen Type 1 Monospaced with serifs Type 2 Proportionally spaced with serifs Type 3 Monospaced without serifs Type 4 Proportionally spaced without serifs Type 5 Casual font type Type 6 Cursive font type Type 7 Small capitals NOTE e For resetting adjustments to the factory preset values press 4 to select Reset and then press ENTER e The default value depends on the broadcasting station Digital Caption Info Digital Caption Information This function allows viewing of digital closed caption information for the digital broadcast prog
44. is in NaS S TONS use it will be indicated by the appearance of a 3 letter CC 1 2001 Closed Caption abbreviation that also indicates the language of the Ratings NONE information Digital Closed Captions ENG English SPA Spanish FRA French or other language codes e Depending on the number of caption services in the Not all programs and VHS videotapes offer closed signal being received you will see information such as 1 2 or 1 4 displayed captions Please look for the EC symbol to ensure 1 2 means the first of two services that captions will be shown Example If a program has three services Digital CC ENG CC1 In the Closed Caption system there can be more than and Text the closed caption display will toggle in this one caption service provided Each is identified by its sequence own number The CC1 and CC2 services display JET 7 subtitles of TV programs superimposed over the m e program s picture e The CC button keeps a record of the last service selected in its memory If the last closed caption mode e g 1 3ENG you In the Closed Caption system the Text1 or Text2 selected is not available for the next program or on Services display text that is unrelated to the program another channel the closed caption service that is being viewed e g weather or news These services available is automatically selected and this service are also superimposed over the program
45. justment item and then press ENTER 3 Press A F or lt gt to select the desired setting and then press ENTER 4 Press MENU to exit Skip this step for Audio Only Audio Only When listening to music from a music program you can turn the screen off and enjoy audio only On Audio is output without screen image Off Both screen images and audio are output e The screen image will return to normal when a button except those for audio adjustment such as VOL MUTE SURROUND AUDIO is pressed Game Play Time This function displays the elapsed game time so you do not lose track of the time To display the elapsed time select GAME for the AV MODE before starting the game On The elapsed time is displayed every 30 minutes when you switch to GAME mode in external input mode Off No adjustment Operation Lock Out This function locks the operation buttons on the TV and the remote control Off No adjustment RC Control Lock All buttons on the remote control are locked Button Control Lock All buttons on the TV except POWER are locked To unlock the buttons on the remote control press MENU on the TV and then select Off on the MENU screen e To unlock the buttons on the TV press MENU on the remote control and then select Off on the MENU screen Downloaded From TV Manual com Manuals On Screen Display Menu If the image does not come in clearly from the external equipment connected to INPUT 1
46. l unit or on the TV See page 13 EGED e To protect equipment always turn off the TV before connecting any external equipment e Please read the relevant operation manual Blu ray disc player etc carefully before making connections Connecting a Blu ray disc player HD DVD player DVD player Digital TV STB Air or Cable VCR game console or camcorder Terminal on external Terminal on the TV Cable equipment INPUT 1 or 2 VIDEO AUDIO L AV cable commercially available VIDEO AUDIO INPUT 1 or 3 COMPONENT AUDIO CO NO tO COMPONENT r Audio cable commercially available r 3 m Cai AUDIO INPUT 2 S VIDEO cable commercially available CED SD ki R lt P Audio cable commercially available cp SvDeG HDMI certified cable commercially available 3 INPUT 4 or 5 DIGITAL AUDIO DIGITAL AUDIO OUTPUT dir a Optical fiber cable commercially available a 1 The S VIDEO terminal takes priority over the video terminals INPUT 2 only 2 e When using an HDMI DVI conversion cable input the audio signal to AUDIO terminal of INPUT 5 3 Depending on the connected equipment audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI connection In this case set the audio formats of the connected equipment to PCM 32 44 1 48 kHz and 16 bits Connecting a PC Terminal on the TV Terminal on PC ANALOG RGB AUDIO INPU
47. lected A There are various reasons why the items cannot be accordance with each menu setting screen selected but the main reasons are as follows Nothing is connected to the selected input terminal Press lt q p to select the desired item The function is not compatible with the current input signal Press 4 to select the desired item 2 Press lt gt to adjust the item e Menu options differ in the selected input modes but the operating procedures are the same e The screens in the operation manual are for explanation purposes some are enlarged others cropped and may vary slightly from the actual screens Menu Operation Buttons Using the remote control Using the control panel of the main unit Use the following buttons on the remote control to You can also operate the menu with the control panel operate the menu of the main unit Button operations on the control panel correspond to FREEZE MENU the ones on the remote control as shown below Vol MCHA INPUT MENU POWER oo O VOL Cursor lt gt on the remote control MENU Press to open or close the menu screen A V lt 4 p Press to select a desired item on the screen or CH A Cursor W on the remote control adjust a selected item ENTER Press to go to the next step or complete the INPUT ENTER on the remote control setting RETURN Press to return to the previous step MENU MENU on the remote control
48. lling the TV requires special skill that should e Attach the stand in the correct direction only be performed by qualified service personnel e Do not remove the stand from the TV unless using an Customers should not attempt to do the work optional wall mount bracket to mount it themselves SHARP bears no responsibility for e Be sure to follow the instructions Incorrect installation improper mounting or mounting that results in of the stand may result in the TV falling over accident or injury 1 Confirm that there are 9 screws and a hex key Using an optional bracket to mount the TV supplied with the stand unit e You can ask a qualified service professional about 99999 9999 be aa AN 37AG5 bracket to mount the TV 2 Attach th rti tiores ont e Carefully read the instructions that come with the ach the supporting post for the stand unit onto inni the base using the box for the stand unit as shown bracket before beginning work below Hex key 7 Hanging on the wall AN 37AG5 wall mount bracket See the bracket instructions for details Screws gt g g ss Vertical mounting Angular mounting About setting the TV angle A 0 5 10 15 20 K _ 77 LC 32D44U e The center of the display N yea 3 Insert the stand into the openings on the bottom G ea inch 4 0 mm under of the TV the A position Insert and tighten the 4 screws into the 4 holes LC 37D44U on the rear of the TV e The center of the display o 1 4 inc
49. measure make a note of your secret number above cut it from this manual and keep it in a safe place Downloaded From TV Manual com Manuals 30 Calling for Service For location of the nearest Sharp Authorized Service or to obtain product literature accessories supplies or customer assistance please call 1 800 BE SHARP LIMITED WARRANTY CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand Liquid Crystal Display product the Product when shipped in its original container will be free from defective workmanship and materials and agrees that it will at its option either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period s set forth below This warranty does not apply to any appearance items of the Product or if the serial number or model number affixed to the Product has been removed defaced changed altered or tampered with This warranty does not cover installation or signal reception problems This limited warranty will not apply if the Product has been or is being used in a commercial setting or application this warranty is meant solely for the non commercial household use of the Product by consumers in their home or residence If you intend to or already use this Product for commercial purposes or in a commercial setting there are warrant
50. minute e Select Off by pressing SLEEP to cancel the sleep timer The TV will enter standby when the remaining time reaches zero e When the sleep timer is set its indicator on the TV lights red Allows you to capture and freeze a moving image that you are watching Press FREEZE e A moving image is captured e Press FREEZE again to cancel the function e When this function is not available No displaying still image available will display e The still image automatically goes out after 30 minutes e If you are using the freeze function and a broadcast activates the V CHIP BLOCK the freeze function will be canceled and a V CHIP BLOCK message will appear INPUT To view external source images select the input source using INPUT on the remote control unit or on the TV 1 Press INPUT e A list of selectable sources appears 2 Press INPUT again or press 4 to select the input source An image from the selected source automatically displays e Each time INPUT is pressed the input source toggles e If the corresponding input is not plugged in you cannot change the input Be sure to connect the equipment beforehand e See page 11 for external equipment connection e Press PC to switch to an image from the PC Downloaded From TV Manual com Manuals Direct Button Operation AV MODE gives you 7 viewing options to choose from to best match the surrounding environment of the TV which can vary due to factors like room
51. n lead cable flat commercially available UHF Sa HPUH yp AYE ER ca ANTENNA Combiner ANT CABLE 300 ohm twin lead cable commercially available To TV antenna terminal Installing Batteries in the Remote Control Un If the remote control fails to operate TV functions replace the batteries in the remote control unit 1 Open the battery cover 2 Insert two AA size batteries 3 Close the battery cover supplied with the product jor_75 ohm coaxial cable e Place the batteries with their terminals corresponding to the and ED indications in the battery compartment Improper use of batteries can result in chemical leakage or explosion Be sure to follow the instructions below e Do not mix batteries of different types Different types of batteries have different characteristics e Do not mix old and new batteries Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries e Remove batteries as soon as they are worn out Chemicals that leak from batteries that come in contact with skin can cause a rash If you find any chemical leakage wipe thoroughly with a cloth e The batteries supplied with this product may have a shorter life expectancy due to storage conditions e f you vil na i usini homa conte nit for an nded period of time remove batteries from it Downloade ro IWVianual com anuals 8 Part Name
52. ng to the product including damages for the loss of time or use of this Sharp product or the loss of information The purchaser will be responsible for any removal reinstallation transportation and insurance costs incurred Correction of defects in the manner and period of time described herein constitute complete fulfillment of all obligations and responsibilities of Sharp to the purchaser with respect to the product and shall constitute full satisfaction of all claims whether based on contract negligence strict liability or otherwise WARRANTY PERIODS Parts amp Labour exceptions noted Audio Product 1 year Camcorder 1 year DVD Product 1 year Projector 1 year lamp 90 days LCD TV 1 year Microwave Oven 1 year magnetron component 4 additional years Air Purifier 1 year Portable Air Conditioner 1 year To obtain the name and address of the nearest Authorized Sharp Service Centre or Dealer please contact SHARP ELECTRONICS OF CANADA LTD 335 Britannia Road East Mississauga Ontario L4Z 1W9 OE THE bes For more information on this Warranty Sharp Extended Warranty Offers Sharp Canada Products Accessory Sales Dealer or Service SHARP Locations please call 905 568 7140 Visit our Web site www sharp ca Ustow ae JER SERVICE Revision 12 16 05 Downloaded From TV Manual com Manuals 32
53. of video signal currently being received Press VIEW MODE or A V while the View Mode menu is displayed to select a desired item on the menu e You can sequentially select a View Mode that has its own aspect ratio 2 E For 4 3 programs Example Screen size images Side Bar S Stretch Smart stretch Stretch Suitable for viewing conventional 4 3 programs in their normal format Suitable for stretching 4 3 programs to fill the screen Suitable for viewing wide screen 2 35 1 anamorphic DVDs in full screen This mode is useful for 1 78 1 DVDs When viewing 1 85 1 DVDs stretch mode will still show very thin black bands at the top and bottom of the screen E For HD programs Stretch Suitable for viewing wide screen 1 78 1 aspect ratio program stretch mode will stil the top and bottom of the screen Full Screen Displays an image faithful to the input signal in full screen S Stretch Smart stretch Suitable for stretching 4 3 programs to fill the screen Zoom Suitable for viewing wide screen 2 35 1 aspect ratio programs in full screen e When using Full Screen it is possible to see noise or bars around different outer portions of the screen Please change view mode to correct this E For PC input mode e Connect the PC before making adjustments See page 11 e Selectable screen size may vary with input signal type show very thin black bands at Example Screen size images
54. other sources refer to the operating instructions 16 Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock 17 Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product 18 Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the AC cord or plug is damaged b If liquid has been spilled or objects have fallen into the product c If the product has been exposed to rain or water d If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation e If the product has been dropped or damaged in any way and When the product exhibits a distinct change in performance this indicates a need for service 19 Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original
55. pe The ranges can be seen on the position setting screen Adjustments are stored separately according to input source Language You can also select a language from the Setup menu Select from among 3 languages English French and Spanish If complex adjustments are made and the settings cannot be restored to normal you can reset the settings to the factory preset values 1 Return to the factory preset values displays on the screen e If you have already set the Secret No input the 4 digit secret number here See page 22 for setting a secret number 2 Select Yes e Now TV will restart automatically OK displays on the screen 3 Select Yes e Now initializing displays on the screen and blinks After the reset has been completed the power shuts off and then comes back on The screen will have returned to its original settings The Channel Setup settings will not be changed The Language settings will not be changed The Secret number settings will not be changed The TV Location Settings will not be changed Downloaded From TV Manual com Manuals On Screen Display Menu Secret No Allows you to use a secret number to protect certain settings from being accidentally changed IMPORTANT Three conditions must be met to enable the V Chip see pages 22 to 24 1 Secret No is registered 2 V Chip V Chip DTV Only settings have been made The V Chip DTV Only will only
56. picture use an outdoor antenna The following is a brief explanation of the types of connections that are used for a coaxial cable If your outdoor antenna uses a 75 ohm coaxial cable with an F type connector plug it into the antenna terminal at the rear of the TV set 1 A 75 ohm system is generally a round cable with F type connector F type connector that can easily be attached to a terminal without tools Commercially 75 ohm coaxial cable round available 2 A 300 ohm system is a flat twin lead cable that can be attached to a 75 ohm terminal through a 300 75 ohm adapter Commercially available Alella F type connector should be finger tightened only K When connecting the RF cable to the TV set do not tighten F type RAN connector with tools T If tools are used it may cause damage to your TV set The breaking 75 ohm coaxial cable of internal circuit etc 300 ohm twin lead cable flat E F type connector Connecting Antenna Cable e Connect the antenna cable to the TV using one of the methods in the illustration as shown 1 or Home Antenna terminal 75 ohm D oS Coaxial cable commercially available VHF UHF antenna Home Antenna 75 ohm coaxial cable round terminal 75 ohm D comma Coaxial cable commercially available Cable without a CATV Cable TV lead in converter Combination VHF UHF antenna 75 ohm coaxial cable round or 300 75 ohm adapter 300 ohm twi
57. ram being viewed e This list is not displayed for analog broadcasts or external input audio video e This information is not included in CC1 CC2 Text1 or Text2 and is not displayed in a list Program Title Display Select the CH display when changing channels for digital broadcasting Yes Program Info displays No Program Info does not display Favorite CH Favorite Channel Setting This function allows you to program 4 favorite channels in 4 different categories By setting the favorite channels in advance you can select your favorite channels easily To register your favorite channel Select Register and then press ENTER Press A W lt 4 b gt to select the position in the category and then press ENTER to register To delete your favorite channel Select 1 Data Clear and then press ENTER Press A Y lt 4 gt to select the channel you want to delete and then press ENTER Select Yes and then press ENTER To delete all the favorite channels select All Data Clear NOTE e Before setting the channel select the channel you want to register as a favorite channel Downloaded From TV Manual com Manuals On Screen Display Menu Digital Setup This setting allows you to optimize the settings of Digital broadcasting Example Digital Setup Audio Setup Identification Software Update Press MENU to display the MENU screen and then press lt p gt to select Digital Setup
58. rence by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Note to CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the National Electrical Code that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical This product utilizes tin lead solder and fluorescent lamp containing a small amount of mercury Disposal of these materials may be regulated due to environmental considerations For disposal or recycling information please contact your local authorities the Electronic Industries Alliance www eiae org the lamp recycling organization www lamprecycle org or Sharp at 1 800 BE SHARP For U S A only Trademarks e Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories e HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC e Products that have earned the ENERGY STAR are designed to protect the environment th
59. rough superior energy efficiency Downloaded From 1 V Manual com Manuals 3 DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television To ensure safety and many years of trouble free operation of your product please read the Important Safety Instructions carefully before using this product IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions but it can also cause personal injuries and property damage if improperly handled This product has been engineered and manufactured with the highest priority on safety However improper use can result in electric shock and or fire In order to prevent potential danger please observe the following instructions when installing operating and cleaning the product To ensure your safety and prolong the service life of your Liquid Crystal Television please read the following precautions carefully before using the product Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades wit
60. rrectly to display XGA and WXGA signal Refer to page 21 to set PC input signals PC Resolution Horizontal Frequency Vertical Frequency VESA Standard 720 x 400 31 5 kHz 70 Hz 31 5 kHz 60 Hz O VGA 640 x 480 37 9 kHz 72 Hz O 37 5 kHz 75 Hz O 35 1 kHz 56 Hz O 37 9 kHz 60 Hz O PC SVGA 800 x 600 48 1 kHz 72 Hz O 46 9 kHz 75 Hz O 48 4 kHz 60 Hz O XGA 1024 x 768 56 5 kHz 70 Hz o 60 0 kHz 75 Hz O WXGA 1360 x 768 47 7 kHz 60 Hz O These 3 formats are not supported by the analog RGB terminal DDC is a registered trademark of Video Electronics Standards Association Power Management is a registered trademark of Sun Microsystems Inc VGA and XGA are registered trademarks of International Business Machines Corp Information on the Software License for This Product E Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties Software developed by SHARP and open source software The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act international treaties and other relevant laws This product also makes use of freely distributed software and software components whose copyrights are held by third parties T
61. ry device with the update file into the SERVICE terminal on the TV 2 Press MENU to display the MENU screen and then press lt p to select Digital Setup Press 4 to select Software Update and then press ENTER e If you have already set the Secret No go to step 4 3 Digital Setup Audio Setup Id ication Software Update nput the 4 digit secre number by using 0 9 Digital Setup Press ENTER to start checking the data in the USB memory device Insert the USB memory device containing the software update file Downloaded From TV Manual com Manuals On Screen Display Menu 6 During the data checking Checking blinks Now checking the data in the USB memory device Checking e The current version of the TV software and the version of the update file on the USB memory device are displayed To update the TV software with the update file select Yes and then press ENTER Example Software update file is detected in the USB memory device Start update Current Version Update Version e If the USB memory device is not properly installed or the correct update file cannot be found on the USB memory device an error message is displayed e Check the file on the USB memory device and then reinsert the USB memory device correctly Software update file is not detected in the USB memory device Confirm that you have transferred the f
62. ry movie rating system only uses an age based rating Downloaded From TV Manual com Manuals On Screen Display Menu TV Parental Guidelines Example MPAA TV Guidelines Can English Ratings Gan French Ratings Press 4 to adjust the item to your desired position a indicates the item is blocked Press MENU to exit Suggested age TV Y All children TV Y7 Directed to older children TV G General audience TV PG Parental Guidance suggested TV 14 Parents strongly cautioned TV MA Mature audience only Example MPAA TV Guidelines When setting an individual content based rating item 1 Press or ENTER to access blocked content items from the currently selected age based rating item Press 4 to select an individual item and then press ENTER to unblock it g is removed Repeat the same steps for the other items Press lt or RETURN to register after all individual content rating items are set Content FV Fantasy violence V Violence S Sexual situation L Adult language D Sexually suggestive dialog 2 3 Content Rating FV Vv S L D TV Y X Xx TV Y7 x x x Xx X Suggested TV G x XXK age TV PG x x x x TV 14 XIXIXIX TV MA x x x px The content rating can be set but this rating is not normally broadcast by TV stations x Content rating can be set 23
63. s TV Front Remote control sensor OPC sensor See page 18 POWER SLEEP OPC OPC indicator See page 18 SLEEP indicator See page 13 POWER indicator See page 12 vo VOHA INPUT MENU POWER 2 9 ab 3 i e Channel buttons MENU button CHV A Volume buttons INPUT button POWER button VOL AC INPUT terminal AUDIO OUTPUT terminals AUDIO INPUTS mP DIGITAL AUDIO OUTPUT terminal OUTPUT ANALOG RGB PC IN INPUT 6 terminals PC IN INPUT 5 terminals HDMI INPUT 4 terminal HDMI INPUT 1 terminals SERVICE terminal INPUT 2 terminals ANT CABLE Antenna Cable in INPUT 3 terminals Downloaded Part Names Remote Control Unit ROWER DISPLAY SLEEP AV MODE 1 fe e 1 21 bs eu _ FAVORITE CH_ 22 1 POWER Switch the TV power on or enters standby See page 12 2 CC Display captions from a closed caption source See page 15 3 AUDIO Selects the MTS SAP or the audio mode during multi channel audio broadcasts See page 14 4 0 9 Set the channel See page 13 e DOT See page 13 6 FLASHBACK Return to the previous channel or external input mode See page 14 VIEW MODE Select the screen size See page 16 FREEZE Set the still image Press again to return to normal screen See page 13 9 A VW lt p ENTER
64. s batteries temperature probe stylus trays filters belts ribbons cables and paper e Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear f Any damage caused by external or environmental conditions including but not limited to transmission line power line voltage or liquid spillage g Any product received without appropriate model serial number and CSA cUL markings h Any products used for rental or commercial purposes Any installation setup and or programming charges Should this Sharp product fail to operate during the warranty period warranty service may be obtained upon delivery of the Sharp product together with proof of purchase and a copy of this LIMITED WARRANTY statement to an Authorized Sharp Service Centre or an Authorized Sharp Servicing Dealer In home warranty service may be provided at Sharp s discretion on any Sharp television with the screen size of 27 or larger and on any Sharp Over the Range Microwave Oven This warranty constitutes the entire express warranty granted by Sharp and no other dealer service centre or their agent or employee is authorized to extend enlarge or transfer this warranty on behalf of Sharp To the extent the law permits Sharp disclaims any and all liability for direct or indirect damages or losses or for any incidental special or consequential damages or loss of profits resulting from a defect in material or workmanship relati
65. se vents and openings since insufficient ventilation can cause overheating and or shorten the life of the product Do not place the product on a bed sofa rug or other similar surface since they can block ventilation openings This product is not designed for built in installation do not place the product in an enclosed place such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions are followed e The Liquid Crystal panel used in this product is made of glass Therefore it can break when the product is dropped or applied with impact Be careful not to be injured by broken glass pieces in case the panel breaks e Heat The product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat e The Liquid Crystal panel is a very high technology product with 1 049 088 pixels giving you fine picture details Occasionally a few non active pixels may appear on the screen as a fixed point of blue green or red Please note that this does not affect the performance of your product e Lightning For added protection for this television equipment during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna This will prevent damage to the equipment due to lightning and power line surges e Power Lines An outside antenna system should not
66. ually memorize the channels Air Cable Make sure what kind of connection is made with your TV when selecting Air or Cable CH Search Channel auto search makes the TV look for all channels viewable in the set area CH Memory You can select the channels to skip in each ANALOG Air ANALOG Cable DIGITAL Air and DIGITAL Cable On Skips channels Channel selection disabled using CH NIV Off Does not skip channels Channel selection enabled using CHA V e See Initial Setup on page 12 for setting each item e If no channel is found confirm the type of connection made with your TV and try channel search again e If you select Analog Search Start and initiate the channel search the CH Memory for Cable Digital will be deleted Antenna Setup DIGITAL In order to receive digital air broadcasts you need a digital broadcast antenna You can confirm the antenna configuration through the Antenna Setup DIGITAL screen If necessary adjust the direction of the antenna to obtain the maximum signal strength Signal Strength The signal strength of DIGITAL channel is displayed The signal information is based on the current channel Channel Strength Input the 2 digit channel number to check the signal strength of the selected channel Make sure the signal is strong enough for each channel e This function is available for DIGITAL Air only Downloa ed Fron TV Manual com Manuals On Screen Display Menu This s
67. yer In this case please refer to the operation manual of your DVD player This function allows you to enjoy bass enhanced sound On Bass Enhancer function is on Off Normal sound e Audio menu is grayed out when Output Select is set to Variable Downloaded From TV Manual com Manuals On Screen Display Menu Power Control Menu Power control setting allows you to save energy Example I Power Control No Signal Off Disable No Operation Off Disable Press MENU to display the MENU screen and then press lt p to select Power Control Press 4 W to select a No Signal Off or No Operation Off and then press ENTER Press lt q p to select Enable and then press ENTER Press MENU to exit No Signal Off When set to Enable the power will automatically shut down if there is no signal for 15 minutes kh O N e Five minutes before the power shuts down the remaining time displays every minute e Disable is the factory preset value e When a TV program finishes this function may not operate No Operation Off When set to Enable the power will automatically shut down if there is no operation for 3 hours e Five minutes before the power shuts down the remaining time displays every minute le is the factory preset value e Disab Example Wl Setup EZ Setup CH Setup Antenna Setup DIGITAL Input Skip Parental CTRL Position English
68. you may need to change the input signal type setting from the list below Auto COMPONENT VIDEO e If the selected signal type is incorrect images are not displayed at all or are displayed without any color e Refer to your external equipment operation manual for the signal type e If you set INPUT 1 to Auto the TV will automatically select the input signal e Setting INPUT 1 signal selection to Auto when other equipment is connected will result in the following connection priority INPUT 1 COMPONENT VIDEO VIDEO To watch an HDMI or PC IN equipment image select INPUT4 or INPUTS from INPUT SOURCE menu using INPUT on the remote control unit or on the TV Auto View Enable To use View Mode based on signal recognition including an HDMI signal Disable No function Audio Select Digital For an audio signal via the HDMI terminal Analog For an audio signal via the R AUDIO L terminal e Refer to your external equipment operation manual for the signal type e Audio Select is only available for INPUT 5 e When connecting an HDMI DVI conversion adapter cable to the HDMI terminal the image may not come in clearly Output Select Allows you to select what controls the audio output Fixed Sound via speaker is adjusted with VOL on the remote control unit or VOL on the TV Sound via the AUDIO OUTPUT terminal is not adjustable and outputs at a consistent level Variable Sound via the AUDIO OUTPUT term

Sharp LC-32D44 user manual Tv User Guide Manual Operating

Contents

Download Pdf Manuals

Related Search

Related Contents