Mini Robotic Vacuum Cleaner
Contents
1. In case the product is malfunctioned or damaged by out force please contact the seller for repairing 10 Turn off the power switch when you don t need to use this product for a long time 11 Before use check whether adapter and outlet are properly connected 12 Use this product in temperature form 0 C to 40 C centigrade degree and do not place this product in high temperature environment or under baking sunlight for a long time 13 The appliance is not to be used by persons including children with reduced physical sensory or mental capabilities or person lack of experience and knowledge unless they have been given supervision or instruction 14 Children being supervised do not play with the appliance Battery and Recharging instructions Filter x1 Dusting paper base x1 Dusting paper x3 1 The battery is rechargeable please use the voltage and current specified on the packing If you are not sure of the voltage and current of your house please contact the seller or local power company of a licensed electrician Only use battery pack which provided by manufacturer or specified by manufacturer please check the polarity before installing the battery Battery voltage 14 4VDC working current 800mA Only use the original battery power adapter of the product for charging NS Charging adapter is for indoors use only Do not recharge the product if the battery cord or plug is damaged User manual x1 Side brushes x 4 Scr2. 13 CLEANING AND MAINTENANCE 3 Open the lid of dust bin 4 Take out the inner filter 5 Empty the dirt in the dust bin CLEANING AND MAINTENANCE 6 Rinse the dust bin with tap water Do not wash it in washing machine dish washing machine or other machine 7 Periodically clean the filter with a soft bristle brush 8 Once dry reinstall the filter and the dust bin lid 9 Put back the dust bin into the cleaner NOTE Before put back the dust bin please make sure the PE pad function as non return valve in the dust bin is well located Recheck the filter also before operate the product If operate the product without filter it might cause malfunction 9 8 11 18 CLEANING AND MAINTENANCE Cleaning intake After repeated use for some time dirt and dust might accumulate around the intake of the product to ensure its best cleaning efficiency and constant airflow it should be cleaned periodically 1 Power off the main body 2 Clean up the dirt and dust at the intake Red LED stays after power on TROUBLESHOOTING 1 Battery Low condition 2 Main body is picked up 1 Recharge the battery 2 Re place the robot on the floor acuum on but can not collect and hair 1 The dust bin is full 2 The filter is not installed correctly 1 Clean the dust bin 2 Re install the filter correctly The product is moving backwards after being sta
3. Mini Robotic Vacuum Cleaner User Manual KEL Rev 01 SAFETY 5 4 Safety instructions 1 Battery and Recharging instructions 1 PRODUCT 5 1 4 2 MAIN BODY AND ACCESSORIES 2 BATTERY INSTALLATION AND REMOVAL 4 RECHARGING 5 GENERAL 6 Starting 6 SIDE BRUSH INSTALLATION 6 USING DUSTING 7 CLEANING AND MAINTENANCE 8 Cleaning Dust Bin 8 10 Cleaning 11 1 1 1 1 12 5 12 1 13 SAFETY INSTRUCTIONS PRODUCT FEATURES Thanks for purchasing the K6L Mini Robotic Vacuum Cleaner Before using this product please read ine safety instructions and falow all normal safety precautions Read this user manual thoroughly carefully before using this product Save this user manual Any operation that oppose to descriptions in this user manual may lead to harm to human or this pro
4. duct This revolutionary Mini Robotic Vacuum Cleaner is eguipped with functions suitable for cleaning up floor surfaces of home and office such as wood tile and linoleum The KEL Mini Robotic Vacuum Cleaner is definitely a good household helper Ss te Random Spiral Along the wall Spiral Ba Sara Instructions Only use the product indoors do not use it outdoors Before starting the product make sure the dust bin filter is properly installed 3 Do not use this product in wet or moist environment any environment with liquid e g Bathroom or laundry 4 Before use collect the floor environment remove all the fragile objects and cords clothing papers loose cables as well as making sure to lift curtains and drapes off the floor to avoid any 1 possible accidents In case of a loose cable is tangled with the product the cable might move around with the product as it works and topple down the table chairs or cabinet and might 4 cause hurt o p oper ty da nage 5 Do not sit on top of this product or attach an object on the top of it Beware of children or pets Rechargeable battery x1 Adapter x1 while the product is in operation 6 Do not make this product close to cigarette lighter match or any flammables 7 Never use the product to clean up combustible or highly volatile liquids such as gasoline 8 While the product is in operation make sure all doors leading outside are closed 9
5. emind user to power off it If the product is charged with power on it can only be the picture started to work after fully charged with re set the product AN Adapter plug Illumination ring 6 13 7 18 CLEANI USING DUSTING PAPER Insert the accessory of dusting paper expendables into the grip slot of the dusting paper holder and then assemble it on the product main body bottom Cleaning Dust Bin Disassemble the dusting paper holder as shown in below picture 1 Open the upper cover by pressing the button as shown in the picture Flat the dusting paper on clean floor or desk Put the holder on the dusting paper with contact on the smooth side Fold back the dusting paper one edge into the zigzag clip of the dusting paper holder Strain the other edge of the dusting paper and fold back it the same as above 2 Put your finger into the dust bin groove and grip to take it out Sie ONS Put forefinger under the dusting paper holder back then liftitup Put the holder with dusting paper under the main body and make its raised point to the concave clip of the main body bottom near the wheel And take same action to the other side to finish assembly of the dust paper holder Note Before operate the product if there is no dusting paper on the holder please remove the dusting paper holder from the main body 2 lt lt _ Dusting paper holder 8
6. ews x2 Triangle screw driver x1 Never touch the charger plug or cable with damped hands Before cleaning the product unplug the adapter switch off the unit and take out the battery Please take out the battery when it not in use for long time The battery must be removed from the product before it is scrapped The product must be disconnected from the supply mains when removing the battery 0 The battery is to disposed of safety a 2 13 3 13 BERNSRFPB MAIN BODY AND ACCESSORIES BATTERY INSTALLATION AND REMOVAL Before install or take out the battery the product must be disconnected from the supply mains Remove the dusting paper holder Fig 1 1 2 Inter dustbin 3 Open the battery cover Fig 2 4 Power button Insert the battery into the battery cabinet and close the cover Make sure the cover clips well located in its position Anti drop sensor ii Handie Iiftgroove Front small wheel Side brush Intake Anti drop sensor nti drop sensor Whee dusting paper holder Battery cabinet base 4 13 8 19 RECHARGING BATTERY GENERAL OPERATION 1 Before charging make sure the battery is correctly installed and keep the power button to off Starting Operation position 2 When to charge the product firstly connect the adapter output into the DC jack and then 1 Before operation empty the dust bin and install the filter properly p
7. lug into power socket of the other end then blue light will flash in the illumination ring 2 Place the product in a room with much free space and then power on it to do cleaning work After fully charged blue LED will keep on in the illumination ring 3 When the product runs out of power the LED indicator in the illumination ring will keep on red 4 When the product runs out of power LED indicator will keep red light on it indicate the user the product will stop working to charge the product 4 Turn off the power switch when the product is not to be used going to be charged 5 To ensure the best performance and life span of the battery please charge the product for Note Remove the dusting paper holder and side brushes before using the product on the carpet just to 4hrs continuously After fully charged for 4hrs blue LED will keep on in the illumination ring Since the LED indicators light color is depended on its timing if there is power cut off during avoid wearing these parts This product is not suitable for long pile carpets charging when recharge the product it will always timing from zero automatically Therefore if the product has charged for 4hrs in total it can be used to do cleaning work Note Before charging make sure the power button is on off position otherwise the LED will keep Use the accessories of screw driver and screws to lock the side brushes to its position as shown in red to r
8. rted LED indicators flash in blue after 4hrs charging Air intake he product cannot start 1 The product is on dark color floor 2 Anti drop sensor light was 1 Put the robot on light color floor 2 Clean anti drop sensor light Power supply might been cut off during charging Being used for a long time 1 Battery is not installed properly 2 Battery low 3 The robot is under protection status The robot can be operated if the battery has been fully charged for 4hrs If it becomes crooked please scald it in hot water to recover it to its original shape 1 To install the battery correctl 2 To have the battery fully charged turn off the cleaner first 3 To re set the robot he product circles 7 laround only cannot go One of the wires of the heels might be loosened Note If all above solutions don t work please take below actions 1 Open the wheel cover and connect the loosen wire properly 2 Send the robot to seller for repairing 1 Re set the robot by switching on the power button on the control panel 2 If re set action doesn t work please send the robot to seller for repairing 12 13 13 13
Download Pdf Manuals
Related Search