Manual - White Light
Contents
1. Sound control mode 70 run mode 1 LED display 7001 7009 run 9kinds program mode separately 2 LED display 7ALL 9 kinds program mode run 4 times randomly DMX save data function F001 DMX channel data has no memory F002 DMX channel has memory save the present function when turn off the controller Technical Specification Power supply 100 240V AC 47 63 Hz 0 46A consumption 95W Dimension 276x260x475mm LxWxH Weight 4 5Kg Fuse 2A 250V Ambient temp Range 0 40 C Max Surface temperature 80 C LightZlce LED Force PAR 18 RGBW 25 optics CE USER MANUAL User manual LED Force PAR 18 RGBW 25 optics CE SAFETY INSTRUCTIONS Every person involved with the installation operation and maintenance of this device has to be qualified follow the instructions of this manual CAUTION Be careful with your operations With a dangerous voltage you can suffer a dangerouselectric shock when touching the wires This device has left our premises in absolutely perfect condition In order to maintain thiscondition and to ensure a safe operation it is absolutely necessary for the user to follow the safetyinstructions and warning notes written in this user manual Important Damages caused by the disregard of this user manual are not subject to warranty The dealer will not accept liability for any resulting defects or problems K2. 10s under the condition any button is no function It can display by pressing any button 3s DMX CH4 1 tee DMX Chi R dimmer CH2 G dimmer CH3 B dimmer CH4 W dimmer address CH6 Dee Chi R dimmer CH2 G dimmer CH3 B dimmer CH4 W dimmer CH5 toatal DMX address dimmer CH6 strobe total Slave mode Baek Under manual mode sound control mode can receive slave mode under slave mode the random number machine can do nothing only can receive the master and corresponds to the Master mode All the Slave run modes are corresponding to the Master modes Fixed color 40 Fixed color 20kinds of Fixed color mode can be chosen mode mode Manual Fixed program 50 Fixed Change preset 9 kinds of programs via Up Down mode mode program mode Adjust speed 60 k bE speed Change the speed in the selected program under the 50 function via Up Down 16 the mode value fastest speed R adjust Ll luminance adjust the red luminance value via Up Down key 0 255 luminance value G adjust 2k luminance adjust the red luminance value via Up Down key 0 255 luminance value B adjust 3 luminance adjust the red luminance value via Up Down key 0 255 luminance value W adjust E t luminance adjust the red luminance value via Up Down key 0 255 luminance value 3
3. eep away from heaters and other heating sources If the device has been exposed to drastic temperature fluctuation e g after transportation do notswitch it on immediately The arising condensation water might damage your device Leave thedevice switched off until it has reached room temperature Make sure that the power cord is never crimped or damaged by sharp edges Check the deviceand the power cord from time to time If the external flexible cable or cord of this luminaire is damaged it shall be exclusively replacedby the manufacturer or his service agent or a similar qualified person in order to avoid a hazard Shields lenses or ultraviolet screens shall be changed if they have become visibly damaged tosuch an extent that their effectiveness is impaired for example by cracks or deep scratches Never let the power cord come into contact with other cables Handle the power cord and allconnections with the mains with particular caution Make sure that the available voltage is not higher than stated in this manual Always disconnect from the mains when the device is not in use or before cleaning it Onlyhandlethe power cord by the plug Never pull out the plug by tugging the power cord During the initial start up some smoke or smell may arise This is a normal process and doesnot necessarily mean that the device is defective DANGER OF BURNING Never touch the device during the operation The housing heatsup to the housing temperat
4. st 1 The system has DMX online stand alone mode DMX online mode can link up with each other and controlled 2 When under DMX mode or master slave mode the signal is present the slave the Slave LED will blink fast 3 by DMX controller stand alone has some functions such as dimmer chang program change sound control and so on the address will blink without signal If the Slave link up the Mater and also connects the DMX controller the Master can automatically identify and also turn off the function of sending data from Master under this mode the LED is lightless the Slave receives signals from DMX controller Fuction description 1 Display MODE VALUE wee Bone O E MODE UP DOWN figure 1 Mode LED displayes running mode VALUE LEDs display address speed dimmer value see figure1 opp SLAVE The slave receive indication d MASTER The master send indication 2 UP Select DMX address and speed clock wise direction 3 DOWM Select DMX address and speed conuter clockwise direction 4 MODE Select LED mode the details as Figure 1 The device hasthe function of saving automatically the present state and after powering off it will run the last mode when re start Figure 1 mode LED display Function Display On all time 0001 display mode The display is on all the time Auto turn off 0002 display mode The display can tum off automatically after running
5. ure TSURFACE Don t switch the device on and off in short intervals as this would reduce the lamp s life HEAL TH HAZARD Never look directly into the light source as sensitive persons may suffer anepileptic shock especially meant for epileptics Always disconnect from the mains when the device is not in use or before cleaning it Please note that damages caused by manual modifications on the device or unauthorizedoperation by unqualified persons are not subject to warranty Keep away children and amateurs from the device There are no serviceable parts inside the device Maintenance and service operations are only tobe carried out by authorized dealers OPERATION INSTRUCTION 1 The system has DMX online mode and stand alone mode DMX online mode can link up eachother and is controlled by DMX controller Stand alone has some functions such as dimmer changeprogram music active and so on 2 When under DMX mode or Master slave mode the signal is present The slave LED will blink fast The address will blink without signal 3 If the slave links up the master and also connects with DMX controller the master can identifyautomatically the data and also turn off the function of sending data from master Under this mode the led is lightless The slave receives the signal from DMX controller 4 When receive the DMX signal Master slave mode change into DMX online mode DMXmode2 When cancel the DMX signal it will go back Function Te
Download Pdf Manuals
Related Search