to the PDF file.
Contents
1. 17 AUTO VOLUME 17 SURROUND SOUND 17 SPDIF MODE 17 EQ 17 TIME MENU 18 CLOCK 18 TIMER SET 18 OPTION MENU 18 LANGUAGE 18 RESTORE FACTORY DEFAULT Description of SWEDX Wave SWEDX Wave Key operations Description of SWEDX Wave HDMI SWEDX Wave Key HDMI operations 18 19 19 20 20 Warranty and Service 21 Introduction SWEDX introduces the thinnest kiosk display in the world SWEDX Blade SWEDX Blade is optimal for displaying different types of advertisements information The design possibilities are unlimited thanks to support for both images and videos The thin design reflects the elegance of SWEDX Blade The Full HD Screen ensures optimal display of the content Safety precaution Do not place the product on unstable places from which it may fell off Do not expose the product to extreme temperature and humid environment Avoid subjecting the product to direct sunlit and other heat sources Do not put the product into any liquid Do not put anything inside the product or place liquid container on it In thunder rainy days especially with lightening please unplug the power cables Do not step on the power cable or tangle them together Avoid overload of the exterior electric outlet to prevent fire hazard of electric shock e Clean the product with dry and soft cloth e f your product is broken do not2. In the play list displayed on the screen mark the images you want to add to the play list by marking the image file and pressing OK on the remote control When the image is PLAY LIST marked a CHECK icon will appear to the left of the file name Return x Folder You can mark all images by pressing the GREEN button on the remote control You can delete all markings by pressing the RED button on the remote control When you have marked all images you want to add to the play list press the YELLOW button on the remote control to save the list Press EXIT button on the remote to start displaying the play list image jpg image2 jpg image5 jpg image6 jpg 6 e e g image4 jpg ee ODELALL QADDAL Save GO 90 15 Supported file formats and codecs The built in media player in USB 1 or SD Card IM mode supports the following file formats Format Video codec AUS Resolution Frame Rate Mbit s codec MJPEG lt 10Mbps AVI DIVX 3 11 DIVX4 DIVX5 lt 10Mbps XVID MPEG 2 MPEGA H 264 s 20Mbps Mp4 MPEG 2 MPEG4 H 264 Mp3 WMA TS AAC 1080p 30fps Video MPEG2 Mp2 s 40Mbps TRP PCM 23 976 30 MPG MPEG 1 MPEG 2 MOV lt 20Mbps MPEG 4 H 264 MKV DAT MPEG 1 352x288 Mp2 s 16Mbps VOB JMPEG 2 720x576 Format Max resolution Recommended Colors resolution BMP 9600x9600 px 1920x1080 px 16 256 16 bi
3. USB1 136 wi p102 as T Storage device protection The external USB port located at the Blade side see illustration above is connected to the USB 1 port in the Blade controller and is intended to be used to copy files to the storage device connected to the SD Card IM port Since the storage device connected to SD Card IM port is located inside the Blade then it is safe and cannot be accessed without authorization to ensure the function of the product and avoid sabotage Follow the procedure stated on the previous page to copy files from the external USB port to the storage device connected to the SD Card IM port 14 Description of SWEDX Simple SD Card IM 2013 01 01999 S In Simple mode you can use the screen to display a play list of images or videos The following features are available You can create a play list of images or videos to be displayed e You can choose the duration time for the FAUYNSTENN MODE SUE images only for images MEDIA TYPE PICTURE You can choose the transition effect when SLIDE MODE 0 sliding the images only for images SLIDE TIME Bsec You can choose to have background music l BG MUSIC cR You can choose to display marquee text l PICTURE SCALING FULL You can choose to display date and time PICTURE ROTATE To create a play list follow the steps below ROLL SETTING
4. pressing Enter Input Source AV USB1 SD Card IM Ook Volume Control Press VOL VOL button on the remote control to adjust the volume level Press MUTE button on the remote control when you need to mute the sound BSSSSSSSSSS JOJOOOOCOOOCOOOOCOO 85 pt OSD Menu Operation Press MENU button on the remote control to access the OSD Menu Pressing the same button again will move you backward in the OSD structure Press ENTER button to confirm select Use LEFT 8 RIGHT buttons to navigate or change the parameters of the current sub menu Use UP amp DOWN buttons to navigate in the OSD Menu Press EXIT button to exit the OSD Menu OSD Menu Structure OSD On Screen Display allows users to control or adjust various features and settings in accordance with his her preferences Press the MENU button on the remote control to see the main OSD menu OSD Menu Operation Main Menu Press the MENU button on the remote control to enter the main OSD menu First choose Main menu item you need with the buttons 4 amp gt To select a Main menu items just press Enter or Navigation button W on the Remote Control Sub Menu Each menu item has its own sub menu items to set Sub Menu items A If there is no value to adjust it means there is a sub menu which you can access by pressing Enter and modify the menu values Select sub menu item with A amp Y buttons on the remote c
5. fire or others incidents Please contact a technical authorized by SWEDX brand Departure in holidays Unplug the product during lightning storms or when unused for long periods of time RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK REFER SERVICING TO QUALIFIED SERVICE PERSONNEL WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE Contents Included items are E cu 2 x CR2025 Batteries Main unit Base A Remote Control 3 x Screws Hex Allen key CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type CR 2025 Battery CAUTION The batteries shall not be exposed to excessive heat such as sunshine fire or the like CR 2025 Battery Inputs Inputs 1 AV Input for audio video sources Component and AV shares the same audio input 2 YpBpR Input for component sources YpBpR 3 Headphone Output for headphone devices 4 Conn B Input for Conn B from control buttons Only for use with SWEDX Wave buttons 5 Conn A Input for Conn A from control buttons Only for use with SWEDX Wave buttons 6 SD Card IM Input for Main memory USB or SD card This input is used to play the content photos or videos 7T USB1 Input for USB 1 This input is used for firmware update and content update see USB SD data
6. made by a third party or made by you for a third party This limitation of liability applies whether damages are sought or a claim made under this limited warranty or as a tort claim including negligence and strict product liability a contract claim or any other claim This limitation of liability cannot be waived or amended by any person This limitation of liability will be effective even if you have advised SWEDX 22 SWEDX www swedx com
7. repair it by yourself but contact the maintenance personnel If the remote control is left unused for a longtime please take the batteries out and store them in dry places Avoid dropping the remote control e Ifthe product is installed for exhibition purpose please do not place the overheated part on the ground or carpet to prevent accident Please install the product at proper position Please install it under the guidance of professional staff This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation This equipment is predeterminated to work constantly unless adding switch on this equipment Please disconnect the power cord if this equipment will not be used for a long time Basic operations Use AC 100 240V 50 60 Hz power outlet for the product power supply If the screen of the product is not on please press the power button on the remote control If you want to shut off the product temporary please press the power button on the remote control If you want to turn off the product completely please disconnect the power cable In HDMI and VGA mode the product will enter idle state if there is no signal input within 300 seconds HDMI and 30 seconds VGA The product will turn on w
8. update 8 HDMI Input for HDMI sources 9 PC Input for PC or VGA sources 10 PC Audio Input for PC audio when PC input is connected 11 Coaxial Output for digital audio signal coaxial Do not connect any HDMI devices to the screen through Conn A or Conn B This may cause damage to the LED screen and the HDMI device Conn A and B are exclusively intended to be connected to SWEDX Wave buttons Sa Conn B Conn A Oo e AV YpBpR Head phone E SD Card IM USB1 PC RGB O Coax Mer Vige Audio 6 7 8 9 10 11 Remote Control Notice The remote control included is based on 2 4 GHz and infrared To swtich between 2 4 GHz and infrared do the following Press and hold 1 GB for 5 seconds The red LED lamp will flash and alter the current mode When pressing any key on the remote control the correspondent LED lamp will lit When the LED lamp is red then the remote is in 2 4 GHz mode When the LED limp is blue then the remote is in Infrared mode Recent screens models from SWEDX are all based on 2 4 GHz while older screen models are based on Infrared This remote control is compatible with both models When the remote is in 2 4 GHz mode it can be used without targeting the screen since the receiver is built in Each screen has a pre configured remote control meaning that if you have several screens the remote control will not function on each other If for some reason y
9. EPEAT MODE Options All Once Cancel In Photo Frame mode choose to repeat the picture displaying All for continuous repeating Once for one time repeating Cancel to not repeat the displaying PLAY LOG Options On Off When activated On a log file will be created containing information about the displayed files with time stamp 11 CURRENT CLOCK gt TIMER MODE TIMER SET Time Period CLOCK SHOW CLOCK TEXT COLOR CLOCK MENU The device is equipped with built in battery to save the time information even if the device is disconnected from power source The device is also equipped with advance timer functions with up to 5 timer sets CURRENT CLOCK CURRENT CLOCK Set the current time in Year Month Hours Minutes ans Seconds Setting correct time is essential in order to use the timer function TIMER MODE Options Off Once Everyday Time Period in the time period it is possible to set 5 different timer sets for each day of the week The timer mode will define when the timer will be active For example if you choose Every Day then the timer will be active turning On and Off the product daily according to the Timer Set settings TIMER SET TIMER SET The timer set will define the time when the device will turn On and Off Up to 5 timer sets can be defined eDefine the Timer sets according to the instructions below eChoose the Timer set 1 5 eChoose to activate th
10. NCTION MODE Change with ARROWS or OK button to WAVE Key Exit the MENU SWEDX Wave Key operations 1 Create 9 videos images files and label it according the list below The main video image file which is displayed and repeated continuously until a control button is interacted should be labelled 00 Pig is the file format which can be AVI MPG or other supported video files or JPG GIF PNG for image files see the supported file list The other video files should be labelled as below 01 bx 02 03 04 05 06 07 08 The video image files are associated with the control buttons according to the drawing below Eee amp The video image files must be copied to the ROOT of an USB Flash Memory While displaying a video image associated to a control button you can PAUSE the displayed video image by touching or wave above the associated button To RESUME displaying the video image touch or wave above the same button again To display another video image just touch or wave above any control button it is not necessary to wait until the current video image displaying is completed 7 SD Card IM Description of SWEDX Wave Key HDMI Not applicable for SWEDX Blade ae o m PLAY SETTINGS FUNCTION MODE WAVE KEY HDMI MEDIA TYPE MOVIE SLIDE MODE 0 SLIDE TIME BG MUSIC PICTURE SCALING PICTURE ROTATE ROLL SETTING Wave is a new innovative way to attract audie
11. SWEDX COMES vere Guide 2 gi SWEDX Blade www swedx com 9999 SWB XX A2 SWEDX offers a wide range of accessories vvith professional design and functionality for Digital Signage and LED TVs SWEDX shelves NS Wall mount Retractable SWEDX Matrix Screens Wooden Wall mount Index Page Index 3 Introduction 4 Safety precaution 4 Basic operations 5 Contents 6 Inputs 6 Remote Control Notice 7 Remote Control Buttons 8 Main Operations 9 Volume Control 9 OSD Menu Operation 9 OSD Menu Structure 9 Menus in USB Mode SC Card IM 10 PLAY SETTINGS MENU 10 FUNCTION MODE 10 MEDIA TYPE 10 SLIDE MODE 10 SLIDE TIME 10 BG MUSIC 10 PICTURE SCALING 10 ROLL SETTING 11 ADVANCED MENU 11 LANGUAGE 11 AUTO PLAY 11 REPEAT MODE 11 PLAY LOG 11 CLOCK MENU 12 CURRENT CLOCK 12 TIMER MODE 12 CLOCK SHOW 12 CLOCK TEXT COLOR 12 PICTURE amp OTHER MENU 13 BRIGHTNESS 13 CONTRAST 13 COLOR 13 SHARPNESS 13 ASPECT RATIO 13 OSD ROTATE 13 SOUND SETTINGS 13 USB SD DATA UPDATE Storage device protection 13 14 Description of Swedx Simple SD Card IM 15 Supported file formats and codecs 16 Menus in AV YPBPR and HDMI mode 17 PICTURE MENU 17 PICTURE MODE 17 COLOR TEMPERATURE ASPECT RATIO 17 17 NOISE REDUCTION 17 SCREEN 17 SOUND MENU 17 SOUND MODE 17 BALANCE
12. The values that can be adjusted are Horizontal Position Vertical Position Size Phase A Sound Mode Balance Surround Sound SPDIF MODE SOUND MENU SOUND MODE In this menu you can choose the sound settings Choose between 4 predefined settings Standard Music Movie Sports or define your own settings under the User mode The values that can be adjusted are Treble between 1 100 Bass between 1 100 BALANCE In this menu you can choose the sound balance between Left and Right speakers AUTO VOLUME Not supported in this device SURROUND SOUND In this menu you can choose the surround sound settings Choose between Off Surround SRS TrusSurround XT SPDIF MODE In this menu you can choose how the digital audio signal is sent out from the device through the COAX output 11 Choose between Auto PCM Pulse code modulation EQ In this menu you can adjust the balance between sound frequencies You can adjust the following 120Hz 500Hz 1 5KHz 5KHz 10KHz TIME MENU A Clock Timer Set CLOCK In this menu you can set the device s time It is essential to set the correct time in order to use the timer function TIMER SET Options Options Off Once Everyday Time Period Refer to page 12 for Timer Set OPTION MENU PY OSD Language Restore Factory Default LANGUAGE Choose the language for the OSD Menu RESTORE FACTORY DEFAULT This menu will restore all settings to the fac
13. V TV Display favorite channels list 27 Confirm activate button Navigation adjust button RIGHT 29 Exit the OSD 30 Navigation button DOWN 28 31 Next channel When the channel list is displayed it scrolls down to next page in the list 32 Previous channel When the channel list is displayed it scrolls up to previous page in the list Instant Recording Teletext size selection Display Recorded List Hold Teletext Previous Title Display time in Teletext Next Title and Reveal Teletext Fast text topic selection in Teletext Yellow Fast text topic selection in Teletext Blue Activate subtitles in DTV USB media player Alter TV Radio Channels mode 41 Shortcut to AV 42 Shortcut to DTV TV 33 34 35 36 37 38 39 40 Note This remote control is used for several devices Apply the functions which are compatible with the device you have purchased 9 amp 6 9 CANCELINDEX TIME FREEZE Se Dj SIZE REVEAL AV TV Main Operations Turning On And Off Press Power button on the remote control or the On Off button on the control buttons The product will turn on and will be ready to be used Select Source Press Source button on the remote control Then you can see the source list menu shown below Press Navigation Up down button on the remote control to select the source and confirm by
14. e current chosen set by turning it On eDefine the ON time in hours and minutes eDefine the OFF time in hours and minutes CLOCK SHOW Options Off Time Date The Clock Show will display the current time in the upper left corner of the screen Off No time will be displayed Time The time will be displayed in the following format HH MM Date The date and the time will be displayed in the following format YYYY MM DD HH MM CLOCK TEXT COLOR Options White Black Red Blue Yellow Choose the color for the clock text 20140101 10 15 SWEDX Super Slim LED 12 nn PICTURE amp OTHERS BRIGHTNESS 50 CONTRAST 50 COLOR 50 SHARPNESS 50 ASPECT RATIO AUTO OSD ROTATE LANDSCAPE SOUND SETTINGS gt USB SD DATA UPDATE On De MENU PICTURE amp OTHERS MENU BRIGHTNESS Adjust the brightness between 0 100 CONTRAST Adjust the contrast between 0 100 COLOR Adjust the color intensity between 0 100 SHARPNESS Adjust the sharpness between 0 100 ASPECT RATIO Options Auto 16 9 4 3 Choose the aspect ratio for the displayed content OSD ROTATE Options Landscape Portrait Landscape will display the OSD menu in horizontal mode Portrait will display the OSD menu in vertical mode which is suitable in case of rotating the screen Landscape Portrait USB SD DATA UPDATE Option On Off The device is equipped with 2 USB ports SD Card IM and USB 1 The SD Card IM port is defined to ho
15. for any reason you can not contact your dealer please contact SWEDX Customer Service by visiting http www swedx com SWEDX technical support services During the period of product warranty we support your basic configuration setup and troubleshooting questions and when required we provide you with all instructions on how to return your product for repair For support inquiries please visit http www swedx com SWEDX reserves the right to make final decisions regarding problem determination and the appropriate service option Exchange units assume the remaining warranty of the original product Please refer to your SWEDX Limited Warranty Statement for complete terms and conditions as some models have other terms and conditions Some limitations and restrictions apply and these programs are subject to change without prior notice Limitation of liability If your SWEDX product fails to work as warranted above your sole and exclusive remedy shall be repaired or replaced SWEDX s maximum liability under this limited warranty is expressly limited to the lesser of the price you have paid for the product or the cost of repairing or replacement of any hardware components that malfunction in conditions of normal use SWEDX is not liable for any damages caused by the product or the failure of the product to perform including any lost profits or savings or special incidental or consequential damages SWEDX is not liable for any claim
16. hen the signal is received The setting and tuning of picture and sound will be saved when the product is shut off which will be working in the pre shut off state when the product is turned on again If PC signal source is used please first set the resolution of the PC display card as the following modes 1920x1080 60 Hz for Full HD models and 1366x768 for HD models If there is progressive output of the signal used by the user signal source with progressive output is recommended Preparation Put the product on a stable surface Do not fix the product with others fixations than those provided or suggested by the manufacturer Do not place any material on the product Do not block or cover the ventilation openings on the product The product must be plugged with a tension source of 100 240 volts and 50 60 Hz Power cord and cables must be properly routed and protected to prevent from stepping on them Keep the power cord away from any heat Source Possible fire hazard Heating sources and humidity Keep the product dry and away from humidity Keep the product away from heat sources Cleaning and maintenance Unplug the product before cleaning it Do not use solvents or liquids to clean the product Only clean the product with a soft and dry cloth In case of troubleshooting do not use spare parts other than those suggested by the manufacturer Using inadequate spare parts can lead to electric shocks short circuits
17. ic power fluctuations or failure Use of supplies or parts not meeting SWEDX specifications G Normal wear and tear H Any other cause which does not relate to a product defect 3 Cosmetic damage by purchaser such as markings discoloration scratches dents anti theft devices markings gouges or any 2 mo o uw m 21 other defacement Physically damaged products by purchaser such as broken PCB Housing damaged LED Module No Defect Found product returned to SWEDX as defective but failure is not duplicated by SWEDX s test method The product is not in accordance with the fault in the application Timber is a lifelike natural material which can cause some little changes in the precision of the produced product such as small openings line beside the connecting point and some other small changes which are out of SWEDX control and don t make any effect for the product functionality Dead on Arrival DOA If the product fails within the manufacturer s DOA period a replacement product will be offered Before contacting us In many cases your product may not need repair Before you contact us please consult the troubleshooting section in your user s manual or SWEDX s FAQ web pages at http www swedx com to see if you can easily remedy the problem yourself How to get service For information on obtaining warranty service contact SWEDX dealer the place where you bought your product in first choice If
18. kground while displaying the images PICTURE SCALING Option Original Full Choose the picture scaling Original will display the image according to its resolution without scaling Full will Scale the image to full screen Important Notice In order for the modifications in settings and functions to apply the device will restart automatically when changing the Function Mode This will happen when you exit the OSD Menu 10 ROLL SETTING Options Roll Text On Off Text Color White Yellow Blue Red Black BG Color Yellow Red Blue Transparent Roll Speed Low Middle High ROLL SETTING TEXT COLOR WHITE BG COLOR BLUE ROLL SPEED MIDDLE In all modes it is possible to display text rolling at the screen s bottom eCreate a text file and label it Telop txt eCopy the file to the internal memory eActivate Roll Text ON In the Roll Setting you can choose the text color background color or transparent and the rolling speed using the options above In order to display the characters correctly the text file should be saved in Unicode encoding Gm ADVANCED CL LANGUAGE AUTO PLAY REPEAT MODE PLAY LOG ENGLISH ADVANCED MENU LANGUAGE Option English Japanese Chinese Choose the OSD language AUTO PLAY Options On Off In Simple mode choose to start displaying the picture automatically On or start displaying the pictures manually Off R
19. ly stated otherwise used and reconditioned products that are resold have no warranty from SWEDX and are considered sold AS IS however the selling dealer may offer additional service options Warranty for SWEDX products Check with your dealer for the warranty period What the warranty covers SWEDX warrants your SWEDX display s against defects in material and workmanship during the warranty period from SWEDX factory delivery date shown in the shipping documents If a product proves to be defective in material or workmanship during the warranty period SWEDX will at its sole option repair or replace the product with a similar product provided the purchaser adheres to certain return authorization procedures and guidelines SWEDX reserves the right to charge customer in case of warranty conditions not are fulfilled Who the warranty protects This warranty is valid only for the first purchaser What the warranty does not cover 1 Any product which the serial number has been defaced modified or removed Damage deterioration or malfunction resulting from A Accident misuse neglect fire water lightning or other acts of nature unauthorized product modification or failure to follow instructions supplied with the product Repair or attempted repair by anyone not authorized by SWEDX Any damage of the product due to shipment Removal or installation of the product Causes external to the product such as electr
20. nces It is a combination of a LED screen and 8 control buttons Each button is associated with a video image file stored on the Micro SD Card internal memory Touching the button or waving the hand above the buttons will load and display the associated video image automatically When the video displaying is completed SWEDX wave will load the main video image and display it repeatedly until a button is interacted Thanks to SWEDX Wave technology the buttons can also be placed behind any material such as glass fabric wood etc The interaction is still there creating Jaw dropping effect SWEDX wave applies to wide range of business field such as exhibitions banks hotels restaurants travel agencies etc In fact the list is endless of ideas of using SWEDX wave to display products and services and attract all kind of audiences and customers Activate Wave Key Mode To activate the device to function in Wave Key HDMI mode follow these steps Press SOURCE Choose SD Card IM Press OK Press MENU Choose PLAY SETTINGS menu Choose FUNCTION MODE Change with ARROWS or OK button to WAVE Key HDMI Exit the MENU SWEDX Wave Key HDMI operations The difference between Wave Key and Wave Key HDMI is that the main content will be displayed from and HDMI source connected to the HDMI port instead of the storage device connected to the SD Card IM port When interacting a key the associated image video stored on the storage device
21. ontrol and press Enter button to enter the submenu or change the value B If there is no P part the item has adjustable values Use the 4 amp gt buttons to adjust the values C If the sub menu item is grey colored it means this item is not available in the particular mode A Picture Mode Color Temperature Aspect Ratio Noise Reduction Middle Screen M Menus in USB SD Card IM Mode When the device is in USB SD Card IM modes the OSD Menus differ from OSD Menus in all other modes such as HDMI AV PC RGB and YPBPR w o m PLAY SETTINGS FUNCTION MODE MEDIA TYPE SLIDE MODE SIMPLE MOVIE 0 SLIDE TIME BG MUSIC PICTURE SCALING ROLL SETTING PLAY SETTINGS MENU FUNCTION MODE Option Wave Key Wave Key HDMI Simple Choose the function mode of the product 3 function modes are available For SWEDX Blade please choose Simple Mode Refer to pages 15 17 function modes for details MEDIA TYPE Options Movie Picture Choose if the product will use movies or pictures to be displayed SLIDE MODE Options 0 20 The slide mode will decide the transition effect used when sliding pictures 21 modes are available SLIDE TIME Options 5sec 15sec 30sec 1min 5min 10min 30min 1hour 3hours 12hours 24 hours The slide time will decide the time duration before next sliding occurs BG MUSIC Options On Off In Simple mode you can activate BG MUSIC to play audio in the bac
22. ou need to re program the remote with the screen in this case the Blade do the following 1 Connect the screen in this case the Blade to power outlet 2 Press 0 t 0 buttons on the remote control simultn eously for about 5 seconds The RED lamp on the top edge of the remote will flash indicating that the remote is programmed with the particular screen TIXON MIX SZE HOLD CANCEL INDEX TIME REVEAL RED GREEN YELLOW BLUE ARC AUDIO SUB TV RADIO oogoQ HDMI USB AV TV SWEDX IR 2 4 GHz Remote control buttons 1 2 3 om 15 16 17 18 19 20 On Off button Number buttons for direct channel access Display additional information List TV channels EPG Electronic Program Guide Navigation button UP Navigation adjust button LEFT Menu display In OSD sub menu press to access previous menu Available sources selection Picture freeze Volume increase Volume decrease Enter sleep mode in certain chosen time Start Pause play Start Paus time shift alter Teletext mix Stop play activate Teletext Fast forward Teletext index Fast backward Teletext cancel Fast text topic selection in Teletext GREEN Fast text topic selection in Teletext RED Choose Audio language in DTV USB media player Aspect Ratio selection Shortcut to USB Shortcut to HDMI1 2 3 Mute the built in speakers Previous TV channel in DT
23. st the storage device USB Flash memory or any other storage device that will contain the media videos or photos that will be displayed on the screen The USB 1 port is defined to host the storage device USB Flash memory or any other storage device that will contain the media videos or photos that will be copied to the storage device connected to the SD Card IM This port is also used to update the device firmware To copy update new files from USB 1 to the SD Card IM follow the following steps storage device should be connected to the SD CARD IM memory at this stage e Activate the USB SD Data Update On e Create a TEXT file and label it Autocopy txt the file should be empty Copy the Autocopy txt file and all other files you want to transfer to SD Card IM toa USB flash memory e Insert the USB flash memory to USB 1 input e Restart the device Power OFF and then Power ON e SD DATA UPDATE window CEU will appear choose YES to 9 start the update procedure YES NO e In the new window choose YES to format the storage device connected to SD Card IM port e When the formatting is YES completed the device will start copying the files from the USB 1 to SD Card IM e When the copying is completed deactivate the SD USB Data Update by turning it Off and remove the storage device from USB 1 SD CARD FORMAT See next page for illustration how to use this function with SWEDX Blade optimally SD Card IM
24. t 24 bit 32 bit Image JPEG 15360x15360 px 1920x1080 px 9600x6400 none interlace PNG 1200x800 interlace ISU Mp3 Audio WMV M4A AAC 16 Menus in AV YPBPR and HDMI mode PICTURE MENU A Picture Mode Color Temperature Aspect Ratio Noise Reduction Middle Screen v PICTURE MODE In this menu you can choose the picture settings Choose between 3 predefined settings Standard Mild Dynamic or define your own settings under the User mode The values that can be adjusted are Contrast between 1 100 Brightness between 1 100 Color between 1 100 Sharpness between 1 100 Tint between 1 100 only in NTSC signal COLOR TEMPERATURE In this menu you can choose the color temperature settings Choose between 3 predefined settings Standard Warm Cool or define your own settings under the User mode The values that can be adjusted are Red between 1 100 Green between 1 100 Blue between 1 100 ASPECT RATIO In this menu you can choose the aspect ratio settings The following predefined aspect ratios are available Auto 4 3 16 9 Zoom1 Zoom2 Just Scan Panorama Point to point 1 Not available in PC RGB mode 2 Available only in HDMI mode NOISE REDUCTION In this menu you can choose the settings for noise reduction Choose between Off Low Middle High Default SCREEN In this menu you can choose the screen settings when the device is in PC RGB mode
25. tory settings and erase all adjustments made by the user When using this option you will be asked for confirmation to restore the settings Description of SWEDX Wave Key Not applicable for SWEDX Blade ae o m PLAY SETTINGS FUNCTION MODE WAVE KEY MEDIA TYPE MOVIE SLIDE MODE 0 SLIDE TIME BG MUSIC PICTURE SCALING PICTURE ROTATE ROLL SETTING Wave is a new innovative way to attract audiences It is a combination of a LED screen and 8 control buttons Each button is associated with a video image file stored on the Micro SD Card internal memory Touching the button or waving the hand above the buttons will load and display the associated video image automatically When the video displaying is completed SWEDX wave will load the main video image and display it repeatedly until a button is interacted Thanks to SWEDX Wave technology the buttons can also be placed behind any material such as glass fabric wood etc The interaction is still there creating Jaw dropping effect SWEDX wave applies to wide range of business field such as exhibitions banks hotels restaurants travel agencies etc In fact the list is endless of ideas of using SWEDX wave to display products and services and attract all kind of audiences and customers Activate Wave Mode To activate the device to function in Wave Key mode follow these steps Press SOURCE Choose SD Card IM Press OK Press MENU Choose PLAY SETTINGS menu Choose FU
26. will be displayed and after that the screen will switch to the HDMI port and display what is connected to it 1 Connect a HDMI device to the HDMI port and start it HDMI device can be a computer android dongle DVD player etc 2 Create 8 videos images files and label it according the list below 015025 0304 05 06 07 08 is the file format which can be AVI MPG or other supported video files or JPG GIF PNG for image files see the supported file list The video image files are associated with the control buttons according to the drawing below The video image files must be copied to the ROOT of an USB Flash Memory While displaying a video image associated to a control button you can PAUSE the displayed video image by touching or wave above the associated button To RESUME displaying the video image touch or wave above the same button again To display another video image just touch or wave above any control button it is not necessary to wait until the current video image displaying is completed SD Card IM Warranty and Service The following terms apply only to new in the original carton SWEDX products marketed and distributed by SWEDX which are purchased and used by the original consumer purchaser Depending on the model your terms and conditions may be different from those shown below and this information is subject to change without prior notice Unless specifical
Download Pdf Manuals
Related Search