USER`S MANUAL - moosesound.com
Contents
1. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before extended periods of disuse 4 Replace fuses only with fuses of the same type and rating If a fuse blows repeatedly please contact an authorised service company 5 Do not open or modify this equipment 6 After connecting the equipment check all cables in order to prevent damage or accidents e g due to tripping hazards 7 Do not turn on the equipment ON before checking that all levels to zero IMPORTANT Never remove the cover because otherwise there may be a risk of electric shock There are no user serviceable parts inside Have repairs carried out only by qualified service personnel product s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock The exclamation mark within an equilateral triangle is intended to alert the user to The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the N the presence of important operating and maintenance instructions CAUTION da o RISK OF ELECTRIC SHOCK DO NOT OPEN The amplifier is marked with this instruction so please proceed accordingly in order to avoid any hazard To prevent electrical shock do not remove the cover No user serviceable parts inside Refer service to qualified personnel only www moosesound com 2 MAN181_0 D12. and Harting CHANNEL MCB TYPE 1 pole CURRENT CONTROL TECHNOLOGY Triac phase controlled INDICATORS M C B DMX status Phase status INPUTS DMX512 3 pin XLR Analog D15 OUTPUTS DMX512 3 pin XLR FEATURES DMX patch addresser Pre heat COOLING FAN Constant speed fan 80mm 230V FAN COOLING CONTROL Thermal sensor PROTECTIONS Overload protection by M C B OPERATING VOLTAGE 230V AC 50 60Hz POWER CONSUMPTION 260VA DIMENSIONS WxDxH 3RU spaces 385mm depth WEIGHT 13Kg WWW moosesound com MAN181 0 MOOSE is a brand or PROFACTOR S A PROFACTOR S A Rua do Padr o 52 4440 617 Valongo PORTUGAL Telf 351 224 119 160 Fax 351 224 155 822 info profactor pt PROUDLY DEVELOPED AND MANUFACTURED IN PORTUGAL WWW moosesound com
3. 216 MOOSE 12x 3000W DMX Dimmer Manufacturers Declaration PROPER DISPOSAL OF THIS PRODUCT Valid in the European Union and other European countries with waste separation This symbol on the product or the documents accompanying the product indicates that this appliance may not be treated as household waste This is to avoid environmental damage or personal injury due to uncontrolled waste disposal Please dispose of this product separately from other waste and have it recycled to promote sustainable economic activity Household users should contact either the retailer where they purchased this product or their Local government office for details on where and how they can recycle this item in an environmentally friendly manner Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal ENVIRONMENTAL PROTECTION AND ENERGY CONSERVATION Energy conservation is an active contribution to environmental protection Please turn off all unneeded electrical devices To prevent unneeded devices from consuming power in standby mode disconnect the mains plug EC DECLARATION OF CONFORMITY The equipment marketed by MOOSE complies where applicable with the essential requirements and other relevant specifications of Directives 1999 5 EC R amp TTE 2004 108 EC EMC und 2006 95 EC LVD Additional information can be requested
4. PROUDLY DEVELOPED AND MANUFACTURED IN PORTUGAL WWW moosesound com D1216 DMX512 Dimmer 12x 3000W o o p Es ps E ie E Es o Ov os 07 On 0 O 0 o Os or DMXIN DMX OUT PHASE PHASES 3 3 eo oi USERS MANUAL MAN181 0 D1216 MOOSE 12x 3000W DMX Dimmer Introduction Dear customer Thank for choosing MOOSE branded products MOOSE is a brand of professional audio amp lighting products proudly developed and manufactured in PORTUGAL In order to operate this product in a safe and reliable manner please follow the instructions in this booklet and before operating the equipment read the instructions carefully and please note the technical information Our products undergo very rigorous testing under strict conditions and they are monitored continuosly during the manufacturing process In order to guarantee the product function and safety the original parts of the manufacturer s design must be used If any parts other than those of the manufacturer are used or the product is modified in any way the user forfeits all warranty rights to claim Caution 1 Before connecting the equipment to the power outlet first verify that the mains voltage and frequency match the values specified on the equipment 2 If the power cord of the device is equipped with an earthing contact then it must be connected to an outlet with a protective ground Never deactivate the protective ground of a power cord 3
5. er is going to start with 5 ANALOG OUT Analog control Input O 10V to connect the cable from Mixer O 10V in DIS 6 DMX IN DMX control Input to connect the cable from Mixer DMX in 3 pin XLR 7 DMX OUT DMX output seful to connect Link another Dimmer in 3 pin XLR 8 ACTIVE DIMMER OUTPUT LED indicator of active outputs 9 MAINS SUPPLY Phase 1 3 Common and Ground Clamps For D1216S it s a mains supply cable 10 OUTPUT TERMINALS Channels 1 4 with Neutral Ground Clamps 11 OUTPUT TERMINALS Channels 5 8 with Neutral Ground Clamps 12 OUTPUT TERMINALS Channels 9 12 with Neutral Ground Clamps 13 SHUKO OUTPUTS Shuko socket for each channel 1 to 12 14 HARTING OUTPUT A Harting socket for output channels 1 to 6 pin numbers are shown on the rear panel 15 HARTING OUTPUT B Harting socket for output channels 7 to 12 pin numbers are shown on the rear panel Procedures 1 Connect correctly and according to your installation all the Lamps to their respective outputs D1216 10 11 12 D1216S 13 and DI216H 14 15 2 Following the scheme of the Rear Panel connect the 3 phases Neutral and Ground 9 For D1216S connect the Mains Supply Cable 3 Verify that all Circuit Breakers 1 are in ON position 4 Using a screw driver turn Preheat Selector 2 Clockwise until Lamps filament bright up 5 Choose the Input Connection DIGITAL DMX or ANALOG O 10V A DMX Con
6. nection a Connect the cable from Mixer to DMX CONTROL INPUT 6 b Using DMX SELECTOR 4 choose the channel that you want your dimmer to start with As an example to work with channels 1 12 DMX Selector 4 must be like the picture WWW moosesound com 5 MAN181 0 D1216 MOOSE 12x 3000W DMX Dimmer Connections and Controls As an example to work with channels 13 24 DMX Selector 4 must be like the picture After taking all this steps correctly Green Led indicator must be lighted If this occurs communication is OK and your dimmer is ready to work If not ERROR Red Led indicator lights up It means that something is wrong and you must check and repeat these steps all over again B ANALOG Connection 0 10V a Connect the cable from Mixer to ANALOG CONTROL INPUT 5 After taking all this steps correctly your dimmer is ready to work Connections and Controls DMX signal e diate o TTA Light mixer e Connection to another Dimmer LINK WWW moosesound com 6 MAN181 0 Technical specifications D1216 12x 3000W DMX Dimmer MODEL D1216 TYPE Triac Dimmerpack with mixer CHANNELS 12 six POWER OUTPUT 3000w CHANNEL OUTPUT RATING 16 Amps LOAD TYPE Resistive and Inductive OUTPUT CONNECTOR Shuko Terminal
7. to info profactor pt C PROUDLY DEVELOPED AND MANUFACTURED IN PORTUGAL WWW moosesound com 3 MAN181 0 MOOSE Connections and Controls Please refer to the following scheme and instructions D1216 EX SOC 000000000000 aca ea ea gt O penam o D1216 MADE aeaeaie LS ECE AY me MOOSE DI216S OUT 7 OUT 5 OUT 3 OUT 1 U V V l fl ll fh OUT 8 OUT 6 OUT 4 ouT 2 U V 1 il 1 i D1216H OUTPUT CONNECTOR B 172 3 4 5 6 778 00000000 00000000 9 10 11 12 13 14 15 16 2g RR OR memes ARCA SEE T OUTPUT CONNECTOR 1T2 3 4 5 6 778 00000000 00000000 9 10 11 12113 14 15 16 www moosesound com MAN181_0 D1216 12x 3000W DMX Dimmer D1216 MOOSE 12x 3000W DMX Dimmer Connections and Controls 1 CIRCUIT BREAKERS Individual short circuit protection magnetotermics for each channel 1 to 12 2 PREHEAT When properly used this feature enable to extend Lamp life time very important 3 PHASE INDICATOR LED indicator of active phase inputs 4 DMX SELECTOR Allows the user to select in what channel the dimm
Download Pdf Manuals
Related Search