Home

User`s manual MH-3400 - PLANET Technology Corporation.

1. ha Networking amp Communication i Y Ria mise WA i A uv A lt ul aw aa mo por TR R Na mar Gigabit SSL VPN Secur ity Router Gigabit SSL VPN Security Router User s Manual Copyright Copyright 2012 by PLANET Technology Corp All rights reserved No part of this publication may be reproduced transmitted transcribed stored in a retrieval system or translated into any language or computer language in any form or by any means electronic mechanical magnetic optical chemical manual or otherwise without the prior written permission of PLANET PLANET makes no representations or warranties either expressed or implied with respect to the contents hereof and specifically disclaims any warranties merchantability or fitness for any particular purpose Any software described in this manual is sold or licensed as is Should the programs prove defective following their purchase the buyer and not this company its distributor or its dealer assumes the entire cost of all necessary servicing repair and any incidental or consequential damages resulting from any defect in the software Further this company reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes All brand and product names mentioned in this manual are trademarks and or registered trademarks of their re
2. IP Domain Name FOQDN Authentication Ww IP Address 5 eee If the remote IP address is unknown choose IP by DNS Resolved allowing DNS to translate the IP address This domain name must be available on the Internet When users finish the setting the corresponding IP address will be displayed under the remote gateway of Summary IP Domain NamefFODN Authentication w IPbyDNSResoved wp ___ 3 IP E mail Addr USER FQDN Authentication If users select IP address and E mail type entering the IP address and the E mail allows users to gain access to this tunnel OTTO Lo Jer If the remote IP address is unknown choose IP by DNS Resolved allowing DNS to translated the IP address This domain name must be available on the Internet When users finish the setting the corresponding IP address will be displayed under the remote gateway of Summary IF E mail User FQDN Authentication bl del o E 4 Dynamic IP Domain Name FQDN Authentication If users use dynamic IP address to connect with the device users may select the combination of the dynamic IP address host name and domain name Dynamic IF Domain Namel FOON Authentication 5 Dynamic IP E mail Addr USER FQDN Authentication If users use dynamic IP address to connect with the device users may select this type to link to VPN When the remote VPN gateway requires connection to facilitate V
3. Obtain an Automatic IP automatically This mode is often used in the connection mode to obtain an automatic DHCP IP This is the device system default connection mode It is a connection mode in which DHCP clients obtain an IP address automatically If having a different connection mode please refer to the following introduction for selection of appropriate configurations Users can also set up their own DNS IP address Check the options and input the user defined DNS IP addresses Interface WAN 1 WAN Connection Type Obtain an IP automatically LJ Use the Following ONS Server Addresses pNSServer Required DNSServer Optiona SSS O MTU Auto Manual 1500 bytes item Description o O Use the Following DNS Select an user defined DNS server IP address Beum ON DNS Servers Enter the DNS server IP address you must have to enter a DNS server IP address maximum two DNS servers IP addresses available MTU Auto and Manual can be chosen The default value is 1500 Different value could be set in different network environment e g ADSL PPPoE MTU 1492 The default is Auto Use the Following DNS Select an user defined DNS server IP address Server Addresses 35 Gigabit SSL VPN Security Router User s Manual Static IP If an ISP issues a static IP such as one IP or eight IP addresses etc please select this connection mode and follow the steps below to input the IP number
4. o Service Port Choose the service port IP Address Input the IP address range or IP group Enabled Activate the rule Add to list Add this rule to the list Delete seleted item Remove the rules selected from the Service List Apply Click Apply to save the configuration Cancel Click Cancel to leave without making any change 79 Gigabit SSL VPN Security Router User s Manual Chapter 9 Firewall This chapter introduces firewall general policy access rule and content filter settings to ensure network security 9 1 General Policy The firewall is enabled by default If the firewall is set as disabled features such as SPI DoS and outbound packet responses will be turned off automatically Meanwhile the remote management feature will be activated The network access rules and content filter will be turned off General Policy O Enabled Disabled O Enabled Disabled Enabled ODisabled Advanced Function Enabled O Disabled OEnabled Disabled Porno O Enabled Disabled Enabled Disabled Router sends ARP E himes per second Spay o Caneel Firewall This feature allows users to turn on off the firewall SPI Stateful Packet This enables the packet automatic authentication detection technology The Inspection Firewall operates mainly at the network layer By executing the dynamic authentication for each connection it will also perform an alarming function
5. 6 1 3 LAN Setting 20 Gigabit SSL VPN Security Router User s Manual 6 1 3 1 IPv4 Only IPyd IF LAN Setting po per fs go poo por Device IP Address 192 168 1 1 Multiple Subnet Setting Disabled Subnet Mask 255 255 255 0 Unified IF Management This is configuration information for SG 4800 current LAN IP address The default configuration is 192 168 1 1 and the default Subnet Mask is 255 255 255 0 It can be changed according to the actual network structure Multiple Subnet Setting IPv4 Only Click Unified IP Management to enter the configuration page as shown in the following figure Input the respective IP addresses and subnet masks LAN Setting Device IP Address 1942 1568 1 1 Subnet Wask 255 255 255 0 Multiple Subnet eben J Unified IF Management This is configuration information for the device current LAN IP address The default configuration is 192 168 1 1 and the default Subnet Mask is 255 255 255 0 It can be changed according to the actual network structure 21 Gigabit SSL VPN Security Router User s Manual O ci Device IP Address 192 Subnet Mask255 o L Multiple Subnet LANIP Address Y Add to list Delete selected Subnet Dynamic Enable DHCP Server Subnet Subnet3 Enable Cl Enable Dl Enable Dl En
6. Quality of Service Interface D WAN El WAN2 C wan a C WAN4 Service All Traffic TCP amp UDP 1 65535 ll F Address 9 0 O0 o Direction Upstream Mini Rate Kbit sec Max Rate Kbit sec Decrees ghee share total bandwidth with all IP addresses Assign bandwidth for each IP address Enabled F Delete selected item 70 Gigabit SSL VPN Security Router User s Manual Exception IP address Interface wan1 O wan2 O wana O wana O use Direction Do not control upstream bandwidth Do not control downstream bandwidth O Do not control bi direction bandwidth Enabled Show Tella Aly Cancel 8 1 1 The Maximum Bandwidth provided by ISP The Maximum Bandwidth provided by ISP WAN 1 ILL LODO WAN 2 10000 10000 WAN 3 10000 LECC WAN 4 ILL LODO In the boxes for WAN1 and WAN2 bandwidth input the upstream and downstream bandwidth which users applied for from bandwidth supplier The bandwidth QoS will make calculations according to the data users input In other words it will guarantee a minimum rate of upstream and downstream for each IP and Service Port based on the total actual bandwidth of WAN1 and WANZ2 For example if the upstream bandwidths of both WAN1 and WANZ2 are 512Kbit Sec the total upstream bandwidth will be WAN1 WAN2 1024Kbit Sec Therefore if there are 50 IP addresses in the Intranet the minimum guaranteed upstream bandwidth for each IP would be 1024Kbit 50 20Kbit
7. Status VPN Setting Status Indicates VPN setting information in VPN Router Tunnel s Used Indicates number of tunnels that have been configured in VPN Virtual Private Network Tunnel s Available Indicates number of tunnels that are available for VPN Virtual Private Network 5 1 6 Log Setting Status Disabled 5 2 Change and Set Login Password and Time 5 2 1 Password Setting When you login VPN Router setting window every time you must enter the password The default value for VPN Router username and password are both admin For security reasons we strongly recommend that you must change your password after first login Please keep the password safe or you might not login to VPN Router You can press Reset button for more than 10 sec VPN Router will return back to default Wee Gigabit SSL VPN Security Router User s Manual Password Setup admin admin Spay Censal The default is admin Password Input the original password The default is admin Input the new user name e x Planet Confirm New Password Input the new password again for verification Apply Click Apply to save the configuration Cancel Click Cancel to leave without making any change This action will be effective before Apply to save the configuration If users have already changed username and password they should login with current username and password and input
8. config exp file 160 Gigabit SSL VPN Security Router User s Manual 13 4 SNMP Simple Network Management Protocol SNMP refers to network management communications protocol and it is also an important network management item Through this SNMP communications protocol programs with network management i e SNMP Tools HP Open View can help communications of real time management The device supports standard SNMP v1 v2c and is consistent with SNMP network management software so as to get hold on to the operation of the online devices and the real time network information SNMP Setup Enabled SNMP Gigabit SSL VEH Security Router public private public Agay C Cenedl CI Beton Get Community Set the name of the group or community that can view the device SNMP data The default setting is Public Set Community Set the name of the group or community that can receive the device SNMP data The default setting is Private Trap Community Set user parameters password required by the Trap receiving host computer to Name receive Trap message Send SNMP Trap to Set one IP address or Domain Name for the Trap receiving host computer Apply Press Apply to save the settings Cancel Press Cancel to keep the settings unchanged 161 Gigabit SSL VPN Security Router User s Manual 13 5 System Recover Users can restart the device with System Recover button Restart Restart Router Fact
9. 5 Radius MSCHAPV2 121 Gigabit SSL VPN Security Router User s Manual http 192 168 1 1 edit_sslvpn_domain htm Windows Internet Ex IE O X http 1192 168 1 1 ed _sl pn_domeain htn Authentication Type Radius MSCHAPYVZ Domain Name Radius Sry Radius PassWord Authentication Select the authentication server type from the drop down menu Type Name the selected authentication server RADIUS Srv Enter authentication server address Radius Enter the password for RADIUS Password Click on the Apply tab to save changes Click Cancel to clear any recent changes to the settings 6 NT Domain Authentication Type Domain Name NT Server Address NT Domain Address Authentication Select the authentication server type from the drop down menu Type Domain Names Name the selected authentication server 1075 Gigabit SSL VPN Security Router User s Manual NT Server Enter the NT Domain authentication server address Address NT Domain Enter NT Domain authentication domain name For example planet com Name Click on the Apply tab to save changes Click Cancel to clear any recent changes to the settings 7 Active Directory E Http 192 168 1 1 edit sslvpn_d Authentication Type Domain Name AD Srv Addr AD Domain Authentication Select the authentication server type from the drop down menu Type Name the selected authentication server AD Srv_Add Enter Activ
10. Snow Takie PERE ELI Genzel Example 3 How do I set up Auto Load Balance Mode to keep all Intranet IP addresses from going through WAN2 when the destination port is Port 80 and keep all other services from going through WAN1 As in the figure below there are two rules to be configured The first rule select HTTP TCP 80 80 from the pull down option list Service and then in the boxes of Source IP input 192 168 1 0 to 0 which means to include all Intranet IP addresses Retain the original numbers 0 0 0 0 in the boxes of Destination IP Which means to include all Internet IP addresses Select WAN2 from the pull down option list Interface and then click Enable Finally click Add New and the rule will be added to the mode The device will transmit packets to Port 80 through WAN2 However with only the above rule packets that do not go to Port 80 may be transmitted through WAN2 therefore a second rule is necessary The second rule Select All Ports TCP amp UDP 1 65535 from the pull down option list Service and then input 192 168 1 2 254 in the boxes of Source IP Retain the original numbers 0 0 0 0 in the boxes of Destination IP which means to 53 Gigabit SSL VPN Security Router User s Manual include all Internet IP addresses Select WAN1 from the pull down option list Interface and then click Enable Finally click Add New and
11. Subnet Mask SA gt 255 255 255 0 IP Address O gt fe8B 222 19ff feb6 hb981 9 Default Gateway PP 192 168 1 1 C Documents and Settings PMOL gt When not getting IP address and default gateway by using ipconfig or the received IP address is 0 0 0 0 and 169 X X X we recommend that users should check if there is any problem with the circuits or the computer network card is connected nicely Then open webpage browser IE for example and key in 192 168 1 1 in the website column The login window will appear as below P 0 PS i 266 Y f 7 es eeeceoecee JA i se gt i gt seeeo 6 Sa ae pooo oo ee0scees e so Y A i gt gc ese T i o o a a qa i e on la s o o 4 0000000 gt te 4 peee0eee eee coo o ao 9000 Networking amp Communication 11 Gigabit SSL VPN Security Router User s Manual VPN Router default username and password are both admin Users can change the login password in the setting later For security we strongly suggest that users must change password after login Please keep the BS password safe or you can not login to VPN Router Press Reset button for more than 10 sec all Attention the setting will return to default After login VPN Router web based UI will be shown TPE Gigabit SSL VPN Security Router User s Manual Chapter 5 System Status This chapter introduces the device specification and s
12. o device can keep DHCP functioning and there will be no LAN disconnection LAN IP of the backup Input LAN IP of Master mode which is backed up device MAC Address of the Input Master device MAC address which is backed up backup device Status Normal indicates the status is idle Master device operates normally Status Backup indicates the device takes over all the network transmitting The status will return to Normal when Master device boots normally and send a message to the backup device Then the status will return to Normal which the backup device remains idle Two devices are operating simultaneously High Availability Enable Disable Mode Hardware Backup Mode Two devices are operating simultaneously Master Mode Slave Mode Operation DHCP Enable DHCP Disable Master Slave Mode setting Of two devices must be different WAN Backup WAN 1 WAN 2 WAN 3 Y WAN 4 The checked WAN are not working in this device LAN Gateway Backup h2 fee hoo B 2 MAC Address of the backup device 0 0 p p ppo Status Normal Operation Master Mode Besides operating network with another device Master device is also the DHCP server to issue LAN IP addresses Although Slave device also supports outbound linking its DHCP server is disabled WAN Backup The checked WANs will works in the other device For an example if WAN1 and The Checked WANs WAN2 work in this device and WAN3 and WAN
13. 00 AM User Type If set to Administrator the user will login on the router management UI If set to U user the user will login on the web portal Please note Only Local Database users can be set as Administrator external authentication server users can only be Users and cannot login on the router 126 Gigabit SSL VPN Security Router User s Manual management UI Inactivity Even though a user has logged in via the web portal he she will be forced to logout timeout timeout due to inactivity after 10 minutes If a user logs into the web portal to access enterprise resources using a SSL in an unsafe environment a shorter timeout time is recommended to mitigate risk if the user is logged in but inactive Add to List After completing the above settings click on add to list to add newly created user settings to the corresponding list After complete settings click on the Apply tab to save Click on the Cancel tab to cancel all unsaved settings Click on the Exit tab to close the add new user window Step 3 Service Resource Management Service resource management settings determine which enterprise resources a group s users can use The checked resources will be the icons which are available to the users after they have logged on to the web portal If users are not allowed to enter resource addresses or names administrators can opt to not activate that resource and bookmark the lim
14. Enable Finally click Add New and the rule will be added to the mode The second rule Select All Port TCP amp UDP 1 65535 from the pull down option list Service and then in the boxes of Source IP input 192 168 1 0 0 which means to include all Intranet IP addresses In the boxes of Destination IP input 211 1 1 1 60 254 254 254 Select WAN2 from the pull down option list Interface and then click Enable Finally click Add New and the rule will be added to the mode After the rule has been set up all traffic that is not going to the assigned destinations will only be transmitted through WAN 1 _55 Gigabit SSL VPN Security Router User s Manual Protocol Binding Show Priority service All Traffic TCP UDPA 65535 Service Management Dest IF Interface Enabled Move Up Update this Application All Traffic TCP24UDPA 65535 192 168 1 0 0 211 1 1 1 211 254 254 254JWAN 2 All Traffic TCP amp UDP M 65535 192 168 1 0 0 60 1 1 1 60 254 254 254JVAN 2 Delete selected tem 56 Gigabit SSL VPN Security Router User s Manual Chapter 7 Port Management This chapter introduces how to configure ports and understand how to configure intranet IP addresses 7 1 Setup Through the device users can easily manage the setup for WAN ports LAN ports and the DMZ port by choosing the number of ports speed priority duplex and enable disable the auto negotiat
15. Prevent ARP Attack on LAN Configurable DMZ DHCP Server support class C client dynamic IP static IP IP Grouping support Multiple DHCP Server support 4 sets of Class C PPPoE Static IP DHCP Client Multiple Subnet Protocol TCP IP ARP ICMP FTP TFTP IPv4 NAT with port forwarding Virtual Server DNS Relay DDNS Support DynDNS 3322 Password protected configuration or management sessions for web access Port Management Speed Duplex Auto Negotiation VLAN Transparent Bridge Support IPv4 IPv6 Comprehensive web based management and policy setting SNMP v1 v2c Monitoring Logging and Alarms of system activities Gigabit SSL VPN Security Router User s Manual e Firmware upgrade through Web browser Firmware upgrade through Web browser PPTP VPNI 60 PPTP VPN Tunnels Cid 200 IPSec VPN Tunnels IPSec H W acceleration Friendly VPN Tunnel Management IKE Pre Shared keys IPSec Encryption DES 3DES AES128 AES192 AES256 IPSec Authentication MD5 SHA1 Support PMTU NAT Traversal Connect on Demand DPD detection VPN Hub IP by DNS Resolved View Log 10 full set SSL VPN tunnel 50 Virtual Passage SSL VPN Client SSL H W acceleration Remote Desktop Access HTTP and HTTPs Proxy FTP and Windows Network File Sharing Terminal Access Telnet SSH Authentication Radius LDAP Microsoft Active Directory and NT Domain Name Platform support Windows Linux MAC SSL Encryptions 128bit SHA1 DES CBC SHA Encrypted cookies W
16. Service Port If the service that users wish to manage does not exist in the drop down menu press Management Service Management to add the new service From the pop up window enter a service name and communications protocol and port and then click the Add to list button to add the new service No Log There will be no log record Create Log when matched Event will be recorded in the log Select the source port whether users are permitted or not for example LAN WAN1 84 Gigabit SSL VPN Security Router User s Manual WAN2Z or Any Select from the drop down menu Select the source IP range for example Any Single Range or preset IP group name If Single or Range is selected please enter a single IP address or an IP address within a session Select the destination IP range such as Any Single Range or preset IP group name If Single or Range is selected please enter a single IP address or an IP address within a session Select Always to apply the rule on a round the clock basis Select from and the operation will run according to the defined time Apply this rule Select Always to apply the rule on a round the clock basis If From is selected the activation time is introduced as below This control rule has time limitation The setting method is in 24 hour format such as 08 00 18 00 8 a m to 6 p m Day Control Everyday means this period of time will be under co
17. clicked After the configuration is completed in the China Netcom Policy window users can select WANs in combination to connect with Netcom _A1 Gigabit SSL VPN Security Router User s Manual Import Strategy A division of traffic policy can be defined by users too In the Import Strategy window select the WAN or WAN group ex WAN 1 to be assigned and click the Import IP Range button the dialogue box for document importation will be displayed accordingly A policy document is an editable text document It may contain a destination IP users designated After the path for document importation has been selected click Import and then at the bottom of the configuration window click Apply The device will then dispatch the traffic to the assigned destination IP through the WAN ex WAN 1 or WAN grouping users designated to the Internet Strategy Routing Self defined Strategy 1 Self defined Strategy 2 EST To build a policy document users can use a text based editor such as Notepad which is included with Windows system Follow the text format in the figure below to key in the destination IP addresses users want to assign For example if the destination IP address range users want to designate is 140 115 1 1 140 115 1 255 key in 140 115 1 1 140 115 1 255 in Notepad The next destination IP address range should be keyed in the next line Attention Even if only one destination I
18. compliance could void the user s authority to operate the equipment This device complies with Part 15 of the FCC Rules Operation is subject to the Following two conditions 1 This device may not cause harmful interference and 2 this Device must accept any interference received including interference that may cause undesired operation R amp TTE Compliance Statement This equipment complies with all the requirements of DIRECTIVE 1999 5 EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 9 March 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity R amp TTE The R amp TTE Directive repeals and replaces in the directive 98 13 EEC Telecommunications Terminal Equipment and Satellite Earth Station Equipment As of April 8 2000 WEEE Caution To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment end users of electrical and electronic equipment should understand the meaning of the crossed out wheeled bin symbol Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately Safety This equipment is designed with the utmost care for the safety of those who install and use it However special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment All guidelines of this and of the computer manu
19. eee to enable multiple to one NAT function One NAT Private IP Private IP Range Input intranet IPs for NAT mapping intranet IPs Input intranet IPs for NAT mapping NAT mapping Respective Input the respective public IP addresses This should go along with the following Public IP interface selection If the IP address is not within the interface ranges the setting will not work Select the mapping interface If the WAN IP above is not within the interface range the setting will not work Add to List Add this Add this configuration to the One to One NAT list to the Add this configuration to the One to One NAT list to One NAT list Delete selected Remove a selected One to One NAT list 154 Gigabit SSL VPN Security Router User s Manual Click Apply to save the network configuration modification Click Cancel to leave without making any changes 12 5 DDNS Dynamic Domain Name Service DDNS supports the dynamic web address transfer for 3322 org DynDNS org and DtDNS com This is for VPN connections to a website that is built with dynamic IP addresses and for dynamic IP remote control For example the actual IP address of an ADSL PPPOE time based system or the actual IP of a cable modem will be changed from time to time To overcome this problem for users who want to build services such as a website it offers the function of dynamic web address transfer This service can be applied from www 3322 0rg www
20. some of the existing sessions must be closed For example when BT or P2P is being used to download information and the sessions exceed the limit the user will be unable to connect with other services until either BT or P2P is closed When single IP exceed block this IF s new sessions for 5 minutes If this function is selected when the user s port session reach the limit this user will not be able to make a new session for five minutes Even if the previous session has been closed new sessions cannot be made until the setting time ends O block this IP s all sessions for minutes If this function is selected when the user s port connections reach the limit all the 78 Gigabit SSL VPN Security Router User s Manual lines that this user is connected with will be removed and the user will not be able to connect with the Internet for five minutes New connections cannot be made until the delay time ends If Always is selected the rule will be executed around the clock If From is selected the rule will be executed according to the configured time range For example if the time control is from Monday to Friday 8 00am to 6 00pm users can refer to the following figure to set up the rule Exempted Service Port or IP Address Exempted Service Port or IP Address Service Service Management sorer ML e e LJ Enabled Maximum connections limit Unlimited Not exceed 200
21. 80 3 14 By Outbound Session The figure displays the source IP address network protocol type source port destination IP address destination port bytes per second and percentage Traffic Statistic Outbound Service By Inbound Session The figure displays the source IP address network protocol type source port destination IP address 173 Gigabit SSL VPN Security Router User s Manual destination port bytes per second and percentage Traffic Statistic Inbound Session hd Enabled Traffic Statistic 192 168 1 100 TCP 2940 192 168 5 126 1144 9 100 174 Gigabit SSL VPN Security Router User s Manual 14 4 IP Port Statistic The device allows administrators to inquire a specific IP or from a specific port about the addresses that this IP had visited or the users source IP who used this service port This facilitates the identification of websites that needs authentication but allows a single WAN port rather than Multi WANs Administrators may find out the destination IP for protocol binding to solve this login problem For example when certain port software is denied inquiring about the IP address of this specific software server port may apply this feature Moreover to find out BT or P2P software users may select this feature to inquire users from the port IP Port Statistic Enabled IP Port Statistic F address 0 o o o Specific IP Status Enter the IP address that users want to inq
22. MO Filter broadcast packets from WAN MTU Auto Manual 1500 pytes _ Enabled Line Dropped Scheduling Line Dropped Period from 0 jo to 0 24 Hour Format Line Dropped Scheduling 5 minutes ahead line dropped to start new session transferring Backup Interface Gigabit SSL VPN Security Router User s Manual UserName Input the user name issued by ISP Input the password issued by ISP Connect on Demand This function enables the auto dialing function to be used in a PPPoE dial connection When the client port attempts to connect with the Internet the device will automatically make a dial connection If the line has been idle for a period of time the system will break the connection automatically The default time for automatic break off resulting from no packet transmissions is five minutes Keep Alive This function enables the PPPoE dial connection to keep connected and to automatically redial if the line is disconnected It also enables a user to set up a time for redialing The default is 30 seconds Enable Line Dropped The WAN disconnection schedule will be activated by checking this option In Scheduling some areas there is a time limitation for WAN connection service For example the optical fiber service will be disconnected from 0 00 am to 6 00 am Although there is a standby system in the device at the moment of WAN disconnection all the external connections that go through this WAN
23. Sec Thus 20Kbit Sec can be input for Mini Rate Downstream bandwidth can be calculated in the same way 71 Gigabit SSL VPN Security Router User s Manual The rules configured in Protocol Binding will be executed by the device according to their priorities too The higher up on the list the higher the priority of execution The unit of Attention calculation in this example is Kbit Some software indicates the downstream upstream speed with the unit KB 1KB 8Kbit 8 1 2 QoS To satisfy the bandwidth requirements of certain users the device enables users to set up QoS with Rate Control method Rate Control The network administrator can set up bandwidth or usage limitations for each IP or IP range according to the actual bandwidth The network administrator can also set bandwidth control for certain Service Ports A guarantee bandwidth control for external connections can also be configured if there is an internal server Quality of Service Interface C WAN LJ wana O wana O wana LJ Use Serice All Traffic TCP amp UDP M 65535 jo fo b to o Mini Rate Kbitsec Max Rate Kbit sec Share total bandwidth with all IP addresses O Assign bandwidth for each IP address IP Address i Bandwidth sharing Enabled af pe Gigabit SSL VPN Security Router User s Manual Select on which WAN the QoS rule should be executed It can be a single selection or multiple selectio
24. Ti k lt I m on 4 MD5 seconds pl aj Group 1 s I m on 4 MDS seconds Use IKE Protocol Click the shared key generated by IKE to encrypt and authenticate the remote user If PFS Perfect Forward Secrecy is enabled the Phase 2 shared key generated during the IKE coordination will conduct further encryption and authentication When PFS is enabled hackers using brute force to capture the key will not be able to get the Phase 2 key in such a short period of time Perfect Forward When users check the PFS option don t forget to activate the PFS function of the VPN Secrecy device and the VPN Client as well Phase 1 Phase 2 This option allows users to select Diffie Hellman groups Group 1 Group 2 Group 5 DH Group Phase 1 Phase 2 This option allows users to set this VPN tunnel to use any encryption mode Note that Encryption this parameter must be identical to that of the remote encryption parameter DES 64 bit encryption mode 3DES 128 bit encryption mode AES the standard of using security code to encrypt information It supports 128 bit 192 bit and 256 bit encryption keys Phase 1 Phase 2 This authentication option allows users to set this VPN tunnel to use any authentication Authentication mode Note that this parameter must be identical to that of the remote authentication mode MD5 or SHA1 Phase 1 SA Life The life time for this exchange code is set to 28800
25. WAN DMZ Link Act Green Blinking Transmit data Off Not get the IP address even the port has been connected Steady on LAN port has been connected LAN Link Act Blinking Transmit data Green Steady On Works on 1000M LAN WAN DMZ Amber Steady On Works on 100M Speed Off Works on 10M Button definition Reset Push 5 seconds for Warm Start and push 10 seconds for Factory Default Rocker switch Internal 12V 1 65A G D D 5 1 4 Specification Gigabit SSL VPN Security Router User s Manual Gigabit SSL VPN Security Router SG 4800 8x 10 100 1000 Mbps RJ 45 4 x 10 100 1000 Mbps RJ 45 1 x 10 100 1000 Mbps RJ 45 1 x Reset button for reset to factory default setting 1 x Power on off Switch Inbound Outbound Load Balance by session and by IP Protocol Binding Network Service Detection Dynamic Route RIP v1 v2 Static Route Strategy Routing Concurrent session 50000 Firewall performance 1Gbps Corporation Size SMB clients 200 250 3DES performance 270Mbps Guaranteed Bandwidth Max Bandwidth Session Limit Port based QoS NAT One to One NAT Multiple to One NAT Stateful Packet Inspection SPI Firewall Denial of Service DoS prevention IP 8 Port filtering Block Website by Keyword Content Filter Firewall detection Ping of Death SYN Flooding Land attack IP Spoofing Email Alert for Hacker Attack IP amp MAC Binding Support DMZ to protect your network DMZ Host
26. address they can click to use the administrator pre configured resources Logout Home Network QoS IPIDHCP Group Management Firewall Advanced Function Sys Tool Port Management VPN SSLVPN Log Service Intranet Service a f g Web Secure Web Telnet SSH FTP Book Mark Description Name IP Address Service ETP 192 168 5 163 HTTP edit il Add Bookmark Bookmark configured for this group 129 Gigabit SSL VPN Security Router User s Manual Bookmark Name Services HTTP vw Bookmark Name Enter the service resource name this name will appear on the user s web portal as the service name Name Enter the service name or IP address address Select a service from the drop down menu below for example Telnet SSH FTP After completing the previous steps click on the Add to List tab to add the bookmark setting into the list Click on the Cancel tab to cancel all unsaved settings Bookmark configured for this group Remote desktop service 130 Gigabit SSL VPN Security Router User s Manual Bookmark Name PT Domain Name or IP Address Ps Bookmark Service Terminal Services RDP5 Screen Size 640 480 w Enter the service resource name this name will appear on the user s web portal as the service name address Select remote desktop service RDP5 VNC from the drop down menu Configure user remote desktop screen display dimensions 680x480 800x600 1027x768 or
27. and use the built in PPTP software to connect with the Internet Interface MAN 1 WAN Connection Type PPTP e WAN IP Address Bt a ME EE Subnet Mask l Default Gateway o i l UserName Password Connect on Demand Max Idle Time Min Keep Alive Redial Period Sec Shared Circuit WAN environment Yes NO Filter broadcast packets from WAN MTU 2 Auto Manual 1500 pytes L Enabled Line Dropped Scheduling Line Dropped Period from 0 jo to 0 24 Hour Format Line Dropped Scheduling minutes ahead line dropped to start new session transferring Backup Interface WAN IP Address This option is to configure a static IP address The IP address to be configured could be one issued by ISP The IP address is usually provided by the ISP when the PC is installed Contact ISP for relevant information Input the subnet mask of the static IP address issued by ISP such as Issued eight static IP addresses 255 255 255 248 Issued 16 static IP addresses 255 255 255 240 Default Gateway Address Input the default gateway of the static IP address issued by ISP For ADSL 929 Gigabit SSL VPN Security Router User s Manual Password Input the password issued by ISP Connect on Demand This function enables the auto dialing function to be used for a PPTP dial connection When the client port attempts to connect with the Internet the device will automatically connect with the de
28. button to add the information into the IP list below If this IP or range is already in the list you can not add it again 66 Gigabit SSL VPN Security Router User s Manual Local Group Set You can choose from the IP list on the left side to set up a local IP group Choose IP Group that you would like to modify If you would like to add new groups please push Add new group button Group Name When you add new groups please note if the group name is in the column Delete Group Choose the group that you would like to delete from the pull down list and push the Delete Group button System will ask you again if you would like to delete the group After pushing the confirmation button the group will be deleted Lys You can choose several IPs from IP list on the left side and push this button to button have them added into the group the right side Delete i Delete self defined IP or IP range Apply Click Apply to save the network configuration modification cancel Click Cancel to leave without making any changes pra Gigabit SSL VPN Security Router User s Manual Remote IP Group Management Basically Remote IP Group setups are exactly the same as Local IP Group setups However remote IP group does not have automatically learning functions Instead you need to define addresses ranges and groups manually For example 220 130 188 1 to 200 range r Remote Group
29. destination assignment is not required input O into the IP boxes Select the WAN for which users want to set up the binding rule Enable To activate the rule Add To List To add this rule to the list Delete selected To remove the rules selected from the Service List application Moving Up amp Down The priority for rule execution depends on the rule order in the list A rule located at the top will be executed prior to those located below it Users can arrange the order according to their priorities The rules configured in Protocol Binding will be executed by the device according to their priorities too The higher up on the list the higher the priority of execution 50 Gigabit SSL VPN Security Router User s Manual Show Table Click the Show Table button A dialogue box as shown in the following figure will be displayed Users can choose to sort the list by priorities or by interface Click Refresh and the page will be refreshed click Close and the dialogue box will be closed Priority Interface Add or Remove Service Port If the Service Port users want to activate is not in the list users can add or remove service ports from Service Port Management to arrange the list as described in the following Service Management Windows Internet Explorer E 192 165 1 1 service Name All Traffic TCPAUDPM 65535 DNS UDP 53 53 FTP TCP21 24 HTTP TCP 80
30. domain Click to select one or more controlled websites and click this option to delete Apply Click Apply to save the configuration Cancel Click Cancel to leave without making any change Website Blocking by Keywords nable Website Blocking by Domain Keywords Enable Website Blocking by D in K d Website Blocking by Domain Keywords Add Exception IP address 7 o fo o J lob Enabled Click to activate this feature The default setting is disabled For example If users enter the string sex any websites containing sex will be blocked Keywords Only for Enter keywords English keyword Add to List Add this new service item content to the list Delete selected item Delete the service item content from the list Gigabit SSL VPN Security Router User s Manual Click Apply to save the modified parameters Cancel Click Cancel to cancel all the changes made to the parameters Accept Allowed Domains In some companies or schools employees and students are only allowed to access some specific websites This is the purpose of the function Block Forbidden Domains Accept Allowed Domains Allowed Domains Enabled Allowed Domains a Enabled Activate the function The default setting is Disabled Domain Name Input the allowed domain name etc www google com Add to list Add the rule to list Delete selected item Users can select one or more rules
31. download information the total occupied bandwidth is fixed Add to list Add this rule to the list Move up amp Move down QoS rules will be executed from the bottom of the list to the top of the list In other words the lower down the list the higher the priority of execution Users can arrange the sequence according to their priorities Usually the service ports which need to be restricted such as BT e mule etc will be moved to the bottom of the list The rules for certain IP addresses would then be moved upward Delete selected items Remove the rules selected from the Service List Show Table Display all the Rate Control Rules users made for the bandwidth Click Edit to modify Apply Click Apply to save the configuration Cancel Click Cancel to leave without making any change Show Table Summary Rule Interface Baie 74 Gigabit SSL VPN Security Router User s Manual 8 1 3 Smart QoS Each IF s upstream bandwidth threshold 0 Kbit sec Each IF s downstream bandwidth threshold 1200 Kbit sec Each IP s Maximum bandwith Upstream WAN1 22 Kbit sec WAN2 2 Kbit sec WAN3 200 Kbit sec WAN 4 20 Kbit sec Downstream WAN1 4 Kbitfsec WAN2 4 Kbitfsee WAN3 4 Kbit sec WAN 4 400 Kbit sec L Penalty mechanism show Panelty IF Enabled QoS Choose to apply QoS function When the usage of any WAN s Input the required rate value into the column The default is 6
32. dyndns org or www dtdns com and these are free Also in order to solve the issue that DDNS server is not stable the device can update the dynamic IP address with different services at the same time _PONS Setup Interface Status HostName Config nan oe gt Eon wan nny Eon wan e a Eon nans Se Eon use ae a ca Select the WAN port to which the configuration is to be edited for example WAN 1 Click the hyperlink to enter and edit the settings 155 Gigabit SSL VPN Security Router User s Manual Interface HAN 1 DynDN S org FL gt ee 0 0 0 0 DONS function Is disabled or No Internet connection Register gl m er 0 0 0 0 3322 0rg DONS function is disabled or No Internet connection Apay o Gemeel Interface This is an indication of the WAN port the user has selected Check either of the boxes before DynDNS org 3322 org and DtDNS com to select one of the four DDNS website address transfer functions Username The name which is set up for DDNS Input a complete website address such as abc abcddns org cn as a user
33. efficiency Policy based Firewall The built in policy based firewall prevent many known hacker attack including Ping of Death SYN Flooding Land attack IP Spoofing etc The access rule function allowed only specified WAN or LAN users to use only allowed network services on specified time VPN Connectivity The security gateway support PPTP IPSec and the SSL VPN The SSL VPN function supports up to 60 SSL VPN connection tunnels The IPSec VPN with DES 3DES and AES encryption and SHA 1 MD5 authentication the network traffic over public Internet is secured Content Filtering The security gateway can block network connection based on URLs Scripts The Java Applet cookies and Active X Restrict Application MSN Yahoo Messenger QQ PPSTREAM and PPTV and Download Upload blocking Gigabit SSL VPN Security Router User s Manual Multiple DHCP Server The multi DHCP server support 4 sets of Class C IP address each server can allocate up to 253 client IP addresses and distribute them including IP address subnet mask as well as DNS IP address to local computers It provides an easy way to manage the local IP network QoS Bandwidth Management Featured Smart QoS with dynamic bandwidth management to automatically control P2P and video downloading and other bandwidth hogging to avoid bandwidth insufficient Prioritizing different person group or applications in bandwidth using for a better reasonable management Dynamic Domain Name System
34. for application procedure Meanwhile the packet authentication firewall may decline the connections which use non standard communication protocol DoS Denial of Service This averts DoS attacks such as SYN Flooding Smurf LAND Ping of Death IP Spoofing and so on Block WAN request If set as Enabled then it will shut down outbound ICMP and abnormal packet responses in connection If users try to ping the WAN IP from the external this will not work because the default value is set as activated in order to decline the outbound responses Remote Management To enter the device web based UI by connecting to the remote Internet this feature must be activated In the field of remote browser IP a valid external IP address WAN IP for the device should be filled in and the modifiable default control port should be adjusted the default is set to 80 modifiable Multicast Pass There are many audio and visual streaming media on the network Broadcasting 80 Gigabit SSL VPN Security Router User s Manual Through may allow the client end to receive this type of packet message format This feature is off by default Prevent ARP Virus This feature is designed to prevent the intranet from being attacked by ARP Attack spoofing causing the connection failure of the PC This ARP virus cheat mostly occurs in Internet cafes When attacked all the online computers disconnect immediately or some computers fail to go online Activating thi
35. full screen Add to List After completing the previous steps click on the Add to List tab to add the bookmark setting into the list Apply After complete settings click on the Apply tab to save Cancel e Click on the Cancel tab to cancel all unsaved settings P Exit Click on the Exit tab to close the window Permit Customized Bookmarks If an administrator activates Permit Customized Bookmarks then users should click Add Bookmark to configure a service name or IP address to use that resource 131 Gigabit SSL VPN Security Router User s Manual Services HTTP Name or IP Address 11 4 Domain Management In addition to selecting 8 3 Group Management SSL VPN can also provide authentication to display Domain Management All authentication services will be shown in the Domain Management list Groups using authentication services will be displayed according to the authentication server name Step 1 Domain Management Step 2 User Management Step 3 Service Resource Management Domain Management All Users supervisor Edit Default Local DataBase Mobile Uzer Branch Staff i NK Active Directory 192 168 1 200 1 Add New Domain Domain Name All newly a
36. limit For example if the expiration date is set to November yyyy mm dd 1 2007 then the user will be denied beginning on November 2 2007 at 12 00 AM User Type If set to Administrator the user will login on the router management UI If set to User the user will login on the web portal Please note Only Local Database users can be set as Administrator external authentication server users can only be User and cannot login on the router management UI Inactive timeout Even though a user has logged in via the web portal he she will be forced to logout timeout due to inactivity after 10 minutes If a user logs into the web portal to access enterprise resources using a SSL in an unsafe environment a shorter timeout time is recommended to mitigate risk if the user is logged in but inactive Add to List After completing the above settings click on Add to List to add newly created user settings to the corresponding list Apply After settings are complete click on the Apply tab to save Click on the Cancel tab to cancel all unsaved settings Exit Click on the Exit tab to close the window 135 Gigabit SSL VPN Security Router User s Manual 11 6 Service Resource Management Resource Configuration Word Edit 1 Disabled Excel Edit 1 Disabled PowerPoint Edit Disabled Access Edit 1 Disabled Outlook Edit 1 Disabled Internet Explorer Edit 1 Disabled FrontPage Edit 1 D
37. mode of the device NAT mode or Router mode Click Enabled to open the RIP function Receive RIP Use Up Down button to select one of None gt RIPv1 gt RiPv2 gt Both RIPv1 and v2 as versions the TX function for transmitting dynamic RIP Transmit RIP Use Up Down button to select one of None gt RIPv1 gt RIPv2 Broadcast gt versions RIPv2 Multicast as the RX function for receiving dynamic RIP 12 3 2 Static Routing When there are more than one router and IP subnets the routing mode for the device should be configured as static routing Static routing enables different network nodes to seek necessary paths automatically It also enables different network nodes to access each other Click the button Show Routing Table as in the figure to display the current routing list 150 Gigabit SSL VPN Security Router User s Manual Static Routing Desti I I Subnet Mask IU HU Default Gateway Hop Count Interface Lan Dest IP Input the remote network IP locations and subnet that is to be routed For example the Subnet Mask IP subnet is 192 168 2 0 255 255 255 0 Hop Count This is the router layer count for the IP If there are two routers under the device users should input 2 for the router layer the default is 1 Max is 15 Interface This is to select WAN port or LAN port for network connection location Add to List Add the ro
38. not have to be the same model All of Planet devices which support HA can achieve the function High Availability High Availability O Enable 2 Disable CIWAN Network Service Detection Mode 2 Hardware Backup Mode Two devices are operating simultaneously Operation 2 Master Mode Backup Mode Master Slave Mode setting Of two devices must be different Status Disable Apply Caneel High Availability Enable Activate HA function Disable Disable HA function 1 Hardware Backup Mode It is the general backup mode The master device takes responsibility of network transmitting and the other one is set as idle When the master device fails transmitting it will send out the message to the idle device for taking over network transmitting immediately 2 Two devices are operating simultaneously Two devices operate outbound linking simultaneously but they are still separated as Master device and Backup device In normal situation Master device is major DHCP IP issuer and Backup device will disable DHCP issuing automatically When Master device fails transmitting the Backup device will take over all outbound links and enable DHCP server to provide IP addresses 163 Gigabit SSL VPN Security Router User s Manual Following is the description of the two different modes High Availability Enable Disable Mode Hardware Backup Mode Two devices are operating simultaneously Operation is Master Mode
39. or E T E TE E 48 CHAPTER 7 PORT MANAGEMENT 1 nnmnnn nnne 57 ES A A RT 57 TEA ORR PS a E E A S AT AEA 59 CoP DHCP aAA AT IAS 60 0 sa O A A A A E OO 62 TOIR amp EMAC BINDING desore aA O A AA id aia 63 TT EEE IN E AAA EEA A E SEET A FEE T A A VEEE E E E EE teen EEEE A EAE ET E EEE 66 7 1 PORT GROUP MANAGEMENT csseccccccceseccccccesccccccsseccccnsuseecccaueeccccnececcccasseccecauceccecauseccecauteeceecauteeccenauecess 69 CHAPTER 8 QOS QUALITY OF SERVICE ocoooocconccccnnnncconnnccnoncccnonocononoconnncnnnnnronanernnanrrnnnnrrnannrrnannrnnanarnanns 70 8 1 BANDWIDTH MANAGEMENT sscccccseccccceccccccccccccecccccscccccnseccccuscccuseseccuseececauceccusccescuseeceeaeececuseecceuaescecaececensesss 70 8 1 1 The Maximum Bandwidth provided by ISP oocccnoococcconononcnccononanoncconannnncconnnnnnonconancnnncconnncnnconnns 71 TA SS EAEI esas eee IN NE T2 a u SE EIEE ESE E TI A O E A a TES EE ETA E 75 OLA EXCOpUo IP ada res ra e A A AAA AA TI SSS ON ONT OE ea a a e de da a de et dde E 78 CHAPTER 9 FIREWALL a a a 80 SREE ENE N POLO tt E E EE AE A iaa ls E A E T E E E A E E E E OA ET 80 A NS A A ON 83 AD AER a e o 83 9 2 2 Add New ACCESS RUIO ccccceeccceccccecccccccccceccccscccscccceucccuscccuscecsesccauscensccusececeesecuscenssceueeccaeseenescesess 84 A EE NE EE EE E TE E E E ONE 86 CHAPTER 10 VPN VIRTUAL PRIVATE NETWORK oooncococcconocccoocncconnnccnonccononcconanccnonoronanernnnnrrnan
40. s Gigabit SSL VPN Security Router provides a complete security solution in a box The policy based firewall content filtering function and VPN connectivity provides SSL IPSec and PPTP VPN The SSL VPN function supports up to 60 SSL VPN connection tunnels The IPSec VPN feature provides with 3DES and AES encryption make it a perfect product for your network security No more complex connection and settings for integrating different security products on the network is required This product is built in bandwidth management function which also supported to offers network administrators an easy yet powerful means to allocate network resources based on business priorities and to shape and control bandwidth usage 1 1 Features Multi WAN Auto Backup The SG 4800 can monitor each WAN link status and automatically activate backup links when a failure is detected The detection is based on the configurable target Internet addresses Outbound Load Balancing The network sessions are assigned based on the user configurable load balancing mode including Auto Load Balance Unbinding WAN Balance and Strategy Routing User can also configure which IP or TCP UDP type of traffic use which WAN port to connect Inbound Load Balancing The SG 4800 provides the Inbound Load Balancing for enterprise s internal server The Inbound Load Balancing can reduce the server loading and system crash risks in order to improve the server working
41. set up every management functions for users who have same internet access privileges in the same IP group in order to decrease the effort of setting rules for each IP address For example you can choose to set up QoS or Access Rule by IP grouping Thus you will simplify setting rules IP Grouping consists of Local IP Group and Remote IP Group Local IP Group refers to LAN IP groups and remote IP Group refers to WAN IP groups Local IP Group list will automatically learn IP addresses having packets that pass through firewall Moreover if user changes the IP address the IP in the list will change accordingly well For IP information which is in group list it won t update automatically along with IP list of the left side Administrators need to modify it manually Local Group Set User Edit IP O IF List Group Name test Name IPAddress Y Edit Delete A SAE 101 192 168 1 101 101 i 00 192 168 1 100 100 i 100 192 168 1 100 100 i 101 192 168 1 101 101 IL 2 192 168 1 2 2 il ill MM 4 E IA IP list will show the list which learns the IP addresses A AA on the left under side You can also modify IP addresses manually Name Input the name of IP address or range showed below Input the name Input the name of IP address or range showed below 0 IP address or range showed below IP Address Input IP address or range For example 192 168 1 200 250 Add to IP List After setting name and IP address push this
42. single external IP attack reach the maximum amount the default is 15000 packets Sec and 2000 packets Sec respectively if these conditions above occurs the IP will be blocked for 5 minutes the default is 5 minutes OBJ 176 Users can adjust the threshold value and the blocking duration to effectively deal with external attack The threshold value should be adjusted from high to low LAN Threshold When all packet values from internal attack or from single internal IP attack reach the maximum amount the default is 15000 packets Sec and 2000 packets Sec respectively if these conditions above occurs the IP will be blocked for 5 minutes the default is 5 minutes Users can adjust the threshold value and the blocking duration to effectively deal with external attack The threshold value should be adjusted from high to low Exempted Source IP Input the exempted source IP Exempted Dest IP Input the exempted Destination IP addresses Cancel Click Cancel to leave without making any change Firewall DoS Log system Log Current Time Fri Mar 4 17 36 25 2011 Firewall DoS Log w Show the Firewall Log Show Blocked IP Summary rPAddress Timelsecj Show the blocked IP list and the remained blocked time 82 Gigabit SSL VPN Security Router User s Manual 9 2 Access Rule Users may turn on off the setting to permit or forbid any packet to access internet Users may select to set different network
43. the list with wrong IP address This method only allows MAC addresses on the list to receive IP addresses from DHCP and have Internet access Block MAC address not on the list This method only allows MAC addresses on the list to receive IP addresses from DHCP and have Internet access When this method is applied please fill out Static IP with 0 0 0 0 as the figure below 63 Gigabit SSL VPN Security Router User s Manual IP amp MAC binding Show new IP user Static IP MAC Address _ O Add to ist Name Enabled Add to list Delete selected item C Block MAC address on the list with wrong IP address Block MAC address not on the list IP amp MAC Binding Show mew IP user IP amp MAC binding static IP MAC Address Mame po Enabled Delete selected item Block MAC address on the list with wrong IP address Block MAC address not on the list 64 Gigabit SSL VPN Security Router User s Manual A AA are two ways to input static IP 1 If users want to set up a MAC address to acquire IP from DHCP but the IP need not be a specific assigned IP input 0 0 0 0 in the boxes The boxes cannot be left empty 2 If users want DHCP to assign a static IP for a PC every single time users should input the IP address users want to assign to this computer in the boxes The server or PC which is to be bound wil
44. the rule will be added to the mode The device will transmit packets that are not going to Port 80 to the Internet through WANT Protocol Binding Semice HTTP TCP S0 80 Service Management Dest IP we a Interface WAN 2 Enabled HTTP TCP 80 80 gt 192 168 1 0 0 0 0 0 0 0 0 0 0 WAN 2 All Traffic TOCP amp UDP A 65535 192 168 1 2 254 0 0 0 0 0 0 0 04 WAN 1 Delete selected item Add Configuring Assigned Routing Mode for load Balance IP Group This function allows users to assign packets from specific Intranet IP addresses or to specific destination Service Ports and to specific destination IP addresses through an assigned WAN to the Internet After being assigned the specific WAN will only support those assigned Intranet IP addresses destination Service Ports or destination IP addresses Those which are not configured will go through other WANs for external connection Only when this mode is collocated with Assigned Routing can it bring the function into full play Example 1 How do set up the Assigned Routing Mode to keep all Intranet IP addresses from going through WAN2 when the destination is Port 80 and keep all other services from going through WAN1 As in the figure below select HTTP TCP 80 80 from the pull down option list Service and then in the boxes of Source IP input 192 168 1 0 0 which means to include all Intranet IP addresses Retain the original nu
45. through router Gigabit SSL VPN Security Router User s Manual Group Name GroupName All Users w Add Group EnabledGroup Group Name Display all group names in the drop down list There are four group for default All Users Supervisor Mobile User Branch Staff Add Group Click it to create a new group Add New Group E 192 165 1 1 Apply Click Apply tab to save recent changed settings new group names will appear in the drop down menu Cancel Click Cancel to clear any recent changes to the settings Each group must follow below steps Domain Management User management and Service resource management to complete group settings Step 1 Domain Management Domain Management is used to determine which authentication server will be used to authenticate users at login The default authentication server type is local database SSL VPN supports external authentication services and can be combined with an enterprise s current authentication server for a simplified deployment If no suitable authentication servers can be chosen from the list click Add New Domain to create a new one 117 Gigabit SSL VPN Security Router User s Manual Authentication Domain e Default Local DataBase check user digital certificates Add New Domain tem All authentication servers with defined settings will be displayed on Domain Management list You are required to choose one authentication server
46. to 3600 seconds or 1hours by default This Time allows the automatic generation of other exchange password within the valid time of the VPN connection so as to guarantee security Advanced Setting for IKE Preshareed Key Only Advanced Agaressive Mode C NAT Traversal Dead Peer Detection DPD Interval 0 seconds all Cancel The advanced settings include Main Mode and Aggressive mode For the Main mode the default setting is set to VPN operation mode The connection is the same to most of the VPN devices 109 Gigabit SSL VPN Security Router User s Manual Aggressive Mode This mode is mostly adopted by remote devices The IP connection is designed to enhance the security control if dynamic IP is used for connection NAT Traversal This option allowed the VPN connection can penetrate the NAT which in front of the router Dead Peer If this option is selected the connected VPN tunnel will regularly transmit HELLO ACK Detection DPD message packet to detect whether there is connection between the two ends of the VPN tunnel If one end is disconnected the device will disconnect the tunnel automatically and then create new connection Users can define the transmission time for each DPD message packet and the default value is 10 seconds 10 1 2 PPTP Server It supports the PPTP of Window XP 2000 to create point to point tunnel protocol for single device users to create VPN connection Enable PP
47. users may select to activate this tunnel feature Local VPN Group Setting This local gateway authentication type Local Security Gateway Type must be identical with that of the remote type Remote Security Gateway Type Local Security This local gateway authentication type comes with five operation modes which are IP Gateway Type only Authentication by the use of IP only IP Domain Name FQDN Authentication IP Domain name IP E mail Addr USER FQDN Authentication P Email address Dynamic IP Domain Name FQDN Authentication Dynamic IP address Domain name Dynamic IP E mail Addr USER FQDN Authentication Dynamic IP address Email address name 1 IP only lf users decide to use IP only entering the IP address is the only way to gain access to 104 Local Security Gigabit SSL VPN Security Router User s Manual this tunnel The WAN IP address will be automatically filled into this space Users don t need to do further settings 2 IP Domain Name FQDN Authentication If users select IP domain name type please enter the domain name and IP address The WAN IP address will be automatically filled into this space Users don t need to do further settings FQDN refers to the combination of host name and domain name and can be retrieved from the Internet e von server com This IP address and domain name must be identical to those of the VPN secure gateway setting typ
48. will be disconnected too Only after the disconnected lines are reconnected can they go through the standby system to connect with the Internet Therefore to avoid a huge number of disconnections users can activate this function to arrange new connections through another WAN to the Internet In this way the effect of any disconnection can be minimized Line Dropped Period Input the time rule for the disconnection of this WAN service Line Dropped Input how long the WAN service may be disconnected before the newly added Scheduling connections should go through another WAN to connect with the Internet Link Backup Interface Select another WAN port as link backup when port binding is configured Users should select the port that employs the same ISP Shared Circuit WAN If your WAN connects to a Switch select Enabled to filter broadcast packets environment The default is Disabled MTU is abbreviation of Maximum Transmission Unit Auto and Manual can be chosen The default value is 1500 Different value could be set in different network environment e g ADSL PPPoE MTU 1492 The default is Auto 28 Gigabit SSL VPN Security Router User s Manual After the changes are completed click Apply to save the configuration or click Cancel to leave without making any change PPTP This option is for the PPTP time counting system Input the user s connection name and password issued by ISP
49. 0 bandwidth is over _ Enable Smart QoS Each IP s upstream bandwidth Input the max upstream rate for intranet IPs threshold for all WAN Each IP s downstream bandwidth Input the max downstream rate for intranet IPs threshold for all WAN Each IP s bandwidth is over maximum When any IP uses more bandwidth than the above upstream or threshold its maximum bandwidth will downstream settings the IP will be restricted for the following remain upstream or downstream bandwidth settings Penalty Mechanism After choosing Enabled Penalty Mechanism the device will enable the penalty conditions internally When the IP still uses more upstream or downstream bandwidth than the setting the device will execute the penalty conditions automatically Show Penalty List The IPs which are under penalty mechanism will be shown on the list STe Gigabit SSL VPN Security Router User s Manual Advanced When the usage of certain WANs bandwidth is i under so o then stop to add new punished IP Enabled Session Control Mechanism Every 300 second to detect whether internal IF s bandwidth are over than limit Ifthe punished IP still keep upper bounded limit on then decrease its bandwidth to 50 gii When the usage of all WANs bandwith are lower than 50 disable Smart Qos and after 180 minutes to release punished IP When the usage of certain WAN s When the usage of certain WAN s bandwidth is under _ will bandwi
50. 22 81 100 the session will be distributed in the original session balance mechanism When the other intranet IP 192 168 1 101 visits 61 222 81 101 for the first time the connection is through WAN2 200 10 10 2 If the next destination is to 61 222 81 100 in the same Class B range the connection will also be through WAN2 200 10 10 2 If the destination is to other IP not in the same Class B range as 61 222 81 100 the session will be distributed in the original session balance mechanism 44 Gigabit SSL VPN Security Router User s Manual Not all intranet IP will visit the same Class B range with the same WAN IP It depends on which WAN the first connection goes to If the destination IP is in the same Class B range the connection will go through with the same WAN IP based on the first time learning User Define Dis Or Port Indicates that the intranet IP will connect through the same WAN IP when the Auto Binding service ports are self defined You can self define the service ports and destination IP If the destination IP is set as 0 0 0 0 to O this represents that the destination is to any IP range ES You can only choose either Destination Auto Binding or User Note Define Dis Or Port Auto Binding Take default rules for example Destination Auto Binding User Define Dest IP or Port Auto Binding service All Traffic TCP amp UDP 1 65535 pear ALTO Enable Add to list H
51. 4 work in the other device WAN3 are not working in this and WAN4 should be checked device LAN Gateway Backup Input LAN IP of Slave device The IP should be different from LAN IP of Master device MAC Address of the Input LAN MAC of Slave device It should be different from LAN MAC of Master 165 Gigabit SSL VPN Security Router User s Manual backup device Status Normal means both two devices operate normally Status Backup indicates Slave mode has problems and the device enables backup to take over WAN High Availability 2 Enable Disable Mode Hardware Backu p Mode Two devices are operating Simultaneously SPE Master Mode 2 Slave Mode DHCP Enable DHCP Disable Master Slave Mode setting Of two devices must be different OO wan 1 Owan Y wan 3 4 wan 4 WAN Backup The checked WAN are not working in this device LAN Gateway Backup e ie S MAC Address of the backup device o lo Lo lo o Wo Status Normal Operation Slave Mode Although working with master device Backup device s DHCP server is disabled LAN users need to transmit traffic through the WAN on Slave device You should add LAN IP of Slave device into Master device DHCP server default gateway which is DHCP server IP address For example if the DHCP server s IP of Master device is 192 168 1 1 and the subnet mask is 255 255 255 0 Salve device should be in the same subnet ex 192 168 1 2 WAN Ba
52. 80 er HTTP Secondary TCP 8080 8080 HTTPS TCP 443 443 HTTPS Secondary TCP 8443 8443 TFTP UDP 69 69 Port Range IMAP TCP 143 143 tof NNTP TCP 119 119 POP3 TCPM10 110 SNMP UDPM61 164 SMTP TCP 25 25 TELNET TCP 23 23 TELNET Secondary TCP 8023 8023 Service Name In this box input the name of the Service Port which users want to activate such as BT etc Protocol This option list is for selecting a packet format such as TCP or UDP for the Poet Service Ports users want to activate 51 Gigabit SSL VPN Security Router User s Manual Po up to 100 services into the list Delete selected service To remove the selected activated Services Apply Click the Apply button to save the modification Cancel Click the Cancel button to cancel the modification This only works before Apply is clicked Auto Load Balance mode when enabled The collocation of the Auto Load Balance Mode and the Auto Load Mode will enable more flexible use of bandwidth Users can assign specific Intranet IP addresses to specific destination application service ports or assign specific destination IP addresses to the WAN users choose for external connections Example 1 How do set up Auto Load Balance Mode to assign the Intranet IP 192 168 1 100 to WAN2 for the Internet As in the figure below select All Traffic from the pull down option list Service and then in the boxes of Source IP input the so
53. AN IP please do not enter the server address which can not respond to ICMP Time interval External connection detect ping timeout seconds default is 30 seconds When the VPN tunnel established every 30 seconds send ICMP detect the connection status with the server Retry Count Ping retries default is five If the ping retry count exceeds the number of the remote server is not responding then determine the VPN line break 103 Gigabit SSL VPN Security Router User s Manual 10 1 1 2 Client to Gateway Setting future feature The following describes how an administrator builds a VPN tunnel between devices Users can set this VPN tunnel to be used by one client Only one tunnel will be set and used by a group of clients which allows easy setting Situation in Tunnel Tunnel No Set the embedded VPN feature please select the Tunnel number Tunnel Name Displays the current VPN tunnel connection name such as XXX Office Users are well advised to give them different names to avoid confusion If this tunnel is to be connected to the other VPN device some device requires that the tunnel name is identical to the name of the host end to facilitate verification This tunnel can thus be successfully enabled Users may select which port to be the node for this VPN channel They can be applied for VPN connections Enabled Click to Enable to activate the VPN tunnel This option is set to Enable by default After users set up
54. AN interface Then enter the LAN IPv6 Address After the changes are completed click Apply to save the configuration Click Cancel to leave without making any change a Gigabit SSL VPN Security Router User s Manual 6 1 4 WAN 8 DMZ Settings 6 1 4 1 IPv4 Only WAN Setting WAN Setting WAN 1 Obtain an IP automatically Edit WAN 2 Obtain an IP automatically Edit WAN 3 Obtain an IP automatically Edit WAN 4 Obtain an IF automatically Edit Obtain an IP automatically Static IP connection PPPoE Point to Point Protocol over Ethernet PPTP Point to Point Tunneling Protocol or Transparent Bridge A modification in an advanced configuration Click Edit to enter the advanced configuration page Obtain an Automatic IP automatically This mode is often used in the connection mode to obtain an automatic DHCP IP This is the device system default connection mode It is a connection mode in which DHCP clients obtain an IP address automatically If having a different connection mode please refer to the following introduction for selection of appropriate configurations Users can also set up their own DNS IP address Check the options and input the user defined DNS IP addresses Interface MAN 1 DNSServer Required 0 jo jo jo DNSServer Optional o o o o Shared Circuit WAN environment Yes MTU 2 Auto Manual 1500 bytes a NO Filter broadcast packets from WAN C Enabl
55. C Backup Mode Masters Slave Mode setting Of two devices must be different Status Mormal Status of the backup device Normal Operation Master Mode Indicates the master device will operate for all outbound links When the master device fails transmitting the backup device will take over Status Normal indicates the device operates well Status of the backup Indicates status of backup device If the status is normal administrators can login device the device remotely to manage Remote Management should be enabled Status Abnormal indicates the backup device can not be detected or does exist and need to inspect the backup device actual status High Availa bility Enable Disable Mode Hardware Backup Mode Two devices are operating simultaneously Ope ration C Master Mode 2 Backup Mode Master Slave Mode setting Of two devices must be different LAN IP of the backup device lee fe f 5 unc anno evap oc PF Status Normal Operation Backup Indicates the backup device will take over when the master fails transmitting Mode WAN and LAN IP setting in backup device should be the same as those of master device The backup device should not be in charge of network transmitting and DHCP server lt If the original LAN IP addresses are issued by Master device DHCP server setting of Backup device should be the same as Master device The Backup 164 Gigabit SSL VPN Security Router User s Manual
56. DDNS The Dynamic DNS service allows users to alias a dynamic IP address to a static hostname Multiple NAT Multiple NAT allows local port to set multi subnet and connect to the Internet through different WAN IP addresses Port Range Forwarding Virtual Server The Port Forwarding and DMZ function can let you setup your servers in the Intranet and still provide services to the Internet users Easy Management Embedded Mirror Port to connect with monitoring devices to monitor online behavior It also supporting remote management by web browser with user name and password to realize router management from remote places Log Feature The log and traffic statistic function can helping administrators to record the change abnormal of the whole network status and take actions according to the log information 1 2 Package Contents The following items should be included SG 4800 x 1 Power Cord x 1 Quick Installation Guide x 1 User s Manual CD x 1 Cat5 Cable x 1 Screw Packer x1 Rack mount ear x 2 If any of the contents are missing or damaged please contact your dealer or distributor immediately 1 3 Physical Specification Front Panel Gigabit SSL VPN Security Router Gigabit SSL VPN Security Router User s Manual LED definition PWR Off Off Power Off Steady on System is crashed Amber Blinking System is on self test after power on the device O System is ready ff Steady on Port has been connected amp Get IP
57. Dynamic IP Client Lease Time Minutes Subnet Subnet4 Enabled Disabled Disabled Disabled 192 166 171 100 192168 2 100 1392 166 3 100 192168 4 100 192 168 1 149 192 168 2 149 192 168 3 149 192 168 4 149 Pool Table Table Pool Table Table Pool Table Table Pool Table Table Unified IP Management DNS WINS 60 Gigabit SSL VPN Security Router User s Manual DHCP Dynamic IP Enable DHCP Server Check the option to activate the DHCP server automatic IP lease function If the function is activated all PCs will be able to acquire IP automatically Otherwise users should configure static virtual IP for each PC individually Client lease Time This is to set up a lease time for the IP address which is acquired by a PC The default is 1440 minutes a day Users can change it according to their needs The time unit is minute Range Start This is an initial IP automatically leased by DHCP It means DHCP will start the lease from this IP The default initial IP is 192 168 1 100 Range End This is the end IP automatically leased by DHCP The default initial IP is DNS Domain Name Service This is for checking the DNS from which an IP address has been leased to a PC port Input the IP address of this server directly DNS Required 1 Input the IP address of the DNS server DNS Optional 2 Input the IP address
58. EM file format which is available in the Planet System Users only need to copy all the letters including the Begin and End into the notepad file and save to PEM file Then users can import this PEM file into Planet System Press the Add tab to import certificate Di BEGIN CERTIFICATE MIIDz CCAzegAwIBAglJ ANdwETd1994FMA0GCSqGS I b3DQEBBAUAMIGhMQs wCOYD VOOGEwJ UVzEQMA4GA1 UECBMHSHNpbmNodTEQMA4GA1UEBxMHSHNpbmNodTEcMBoG ATUECHMTUWSv 1IFR1Y2hub2xvZ3keSW53 Lj EcMBoGALUECXMTUH vZHV dCBEZX71 bGSwbWVudDETMBEGAIUEAxMKcW4vLmNvbS450dzEdMBsGCSaqGS I b3DQEJ ARYO mF 1 QHFuby 5 b20udHcwHhcNMDcwNzEwMDIxMzE2WhcNMT IwNzAS5SMDIxMzE2W3 CBOTEL MAKGA TUEBHMCVF cx EDAOBeNVBASTBOhzaW53 aHUxEDAOBeNVBACTBOhzaW5 aHUx HDAaBeNVBAOTE1FubyBUZWNobm9sb2d51EluYy4xHDAaBeNVBAsTE1Byb2R1Y309 RGV WxvcGl bnOxEzARBeNVBAMTCnFuby 4 b20udHcxHTAbBekghk 1 G9w0BCOEW DmZhZUBxbmsuY29tLnR3MIGTMADGCSgqG65 I b3DQEBAQUAASGNADCB1QKBgODxx 1 Xo Yw3eTLnhZS GTMnhSQD6Hx 3 hMLARhSGf3 r4RInNOSkOLYn44 vZkCpSenkmOV6Opv NyDhhODDOBooIx 7Li PG 85CDHuOMrCakKhXEGWVKUx 7LoOLgo2w mlgq6LsafHr 7q5d1Z1VRvJU V3sXdA0 pG1S1VWmufAoSPpQw IDAQABo4 IBC CCAQYWHOYDVROO BBYEFHVzVHVwewSSYdV N O zJ XJ SKdhMIHWBeNVHSMEsc4wecuAFHVzVHVwewSS YdV Nj O zJ XJ 8KdhoYGnp IGkMIGHMOs wCOYDVQQGEw UVzEQMA4GA1UECBMHSHNp bmNodTEOMA4GA 1UEBxMESENpbmNodTEcMBOGA 1UECHMTUWSv IFR1Y2hub2xvZ3kg SW53 Lj EcMBoGA 1UECxMTUHJ vZHV dCBEZXZ 1bG9wbWWudDETMBEGA 1UEAxMKcW5v LmNvbS50dzEdMBsGCSaGSIb3DQEJARYOZmF10HFu
59. Failed 3266 122 0 0 0 338 0 o 0 332884 0 0 0 19797 0 0 0 352681 0 0 0 293 0 o o 0 0 0 0 0 0 0 0 0 0 0 0 o J 5 4 J 5 5 5 0 0 0 0 0 0 0 0 171 14 3 Traffic Statistic Six messages will be displayed on the Traffic Statistic page to provide better traffic management and control Traffic Statistic inbound IF Address inbound IP Address Outbound IF Address Inbound Service Outbound Service Inbound Session Outbound Session By Inbound IP Address The figure displays the source IP address bytes per second and percentage Traffic Statistic Inbound IP Address Enabled Traffic Statistic 192 168 1 100 294 100 By outbound IP Address The figure displays the source IP address bytes per second and percentage Traffic Statistic Outbound IF Address Enabled Traffic Statistic 192 168 1 100 H By Outbound Service The figure displays the network protocol type destination IP address bytes per second and percentage Gigabit SSL VPN Security Router User s Manual Traffic Statistic Outbound Service Ww Enabled Traffic Statistic TCP htp 80 32 56 TCP 1144 17 20 TCP 1863 3 6 UDP 137 2 4 TCP netbios 139 2 By Inbound Service The figure displays the network protocol type destination IP address bytes per second and percentage Traffic Statistic Inbound Service e Enabled Traffic Statistic TCP 1863 37 65 TCP 1144 11 20 TCP htip
60. IP address Indicates the current default static IP address Config Indicates an advanced configuration modification Click Edit to enter the advanced configuration page The DMZ configuration can be classified by Subnet and Range Subnet The DMZ and WAN located in different Subnets For example If the ISP issued 16 real IP addresses 220 243 230 1 16 with Mask 255 255 255 240 users have to separate the 16 IP addresses into two groups 220 243 230 1 8 with Mask 255 255 255 248 and 220 243 230 9 16 with Mask 255 255 255 248 and then set the device and the gateway in the same group with the other group in the DMZ Interface DMZ Subnet Range DMZ amp WAN within same subnet Specify DMZ IP Address lo jo jo io Subnet Mask fess less jess jo Specify DMZ IP Address Enter the DMZ Port IP Address Enter the DMZ Port Subnet Mask E Gigabit SSL VPN Security Router User s Manual Range DMZ and WAN are within same Subnet Interface DMZ Subnet Range DMZ amp WAN within same subnet Interface IP Range for DMZ poto jo fp jo too Interface Select a WAN Port witch is the same subnet with DMZ IP Range for DMZ port Input the IP range located at the DMZ port After the changes are completed click Apply to save the configuration or click Cancel to leave without making any changes 38 Gigabit SSL VPN Security Router User s Manual 6 2 Multi WAN Setting 6 2 1 Load Balance Mod
61. My Network Place le owerPoint access Elvia a 7 Allow the users to access the subnets only but ti Outlook 2 ter et Explorer router will not redirect their packet flow Users can choose to redirect their packets Gerona e pr through router or no g Redirect all users packets through router Default values for each built in user groups are shown in the following table Telnet ig I U IC IS AL MUA HO E ANA AAA ap Acesso A A Yo SIESTES it w w oo o w f S T wne i E Gigabit SSL VPN Security Router User s Manual Configure Bookmark for this Group Services Telnet SSH FTP and remote desktop services RDP5 VNC can use group established bookmarks Users are not required to remember or set a server name or IP address Administrators can see all configured bookmarks here which will display on a user web portal Users are not required to remember or set a server name or IP address they can click to use the administrator pre configured resources Resource Management Web Secure Web RDPS Ml vnNe Telnet SSH FTP Configure Bookmark for this Group Permit Customized Bookmark Administrators can see all configured bookmarks here which will display on a user web portal Users are not required to remember or set a server name or IP
62. N ports LAN IP and application Block attack Set Access rule and restrict Web access DMZ Forwarding UpnP Routing Mode multiple WAN IP DDNS and MAC Clone Monitor VPN Router working status and configuration backup Install VPN Router hardware based on user physical requirements Login VPN Router web based UI Verify VPN Router specification Firmware version and working status Modify the login password considering safe Issue Synchronize the VPN Router time with WAN Connect to WAN Configure bandwidth to optimize data transmission Provide mirror port port management and VLAN setting functions Support Static DHCP IP allocation to meet different needs IP group will simplize the management work To assure transmission of important information manage and allocate the bandwidth further to achieve best efficiency Administrators can block BT to avoid bandwidth occupation and enable access rules to restrict employee accessing internet improperly or using MSN QQ and Skype during working time They can also protect network from Worm or ARP attacking DMZ Forwarding UpnP Routing Mode multiple WAN IP DDNS and MAC Clone Administrators can look up system log and monitor system status and inbound outbound flow in real time Gigabit SSL VPN Security Router User s Manual Network function setting e g PPTP different application environment 11 Logout Close configuration Logout VPN Ro
63. P address is to be assigned it should follow the same format For example if the destination IP address is 210 66 161 54 it should be keyed in as 210 66 161 54 210 66 161 54 After the document has been saved the extension file name is txt users can import the IP range of self defined strategy P Selfdefinedstratepy txt Notepad Sel File Edit Format View Help 148 115 1 1148 115 1 255 148 116 11 11468 116 11 31 218 66 161 5472168 66 161 5 4 Gigabit SSL VPN Security Router User s Manual China Netcom strategy and self defined strategy can coexist However if a destination IP is assigned by both China Netcom strategy and self defined strategy China Netcom strategy will take priority In other words traffic to that destination IP will be transmitted through the WAN or WAN group under China Netcom strategy Session Balance Advanced Function In general session balance is to equally and randomly distribute the session connections of each intranet IP For some special connections for example web banking encrypted connection Https or TCP443 is required to connect from the same WAN IP If one intranet IP visits web banking website and the connection is distributed into different WAN IP addresses there will be disconnection or failure Session balance advanced function targets at solving this issue Session balance advanced function can set the same intranet IP keeps having sessions from the same WAN IP for some specif
64. PN connection the device will start authentication and respond to the VPN tunnel connection Please enter the E Mail to the empty space Dynamic IF E maikUser FQDN Authentication Remote Security This option allows users to set the remote VPN connection access type The following 99 hal Gigabit SSL VPN Security Router User s Manual Group Type offers a few items for remote settings Please select and set appropriate parameters 1 IP address This option allows the only IP address which is entered to build the VPN tunnel IPF Address Reference When this VPN tunnel is connected computers with the IP address of 192 168 2 1 can establish connection 2 Subnet 192 168 2 0 and with subnet mask as 255 255 255 0 can connect with remote VPN IPSec Setup If there is any encryption mechanism the encryption mechanism of these two VPN tunnels must be identical in order to create connection And the transmission data must be encrypted with IPSec key which is known as the encryption key The device provides the IKE automatic encryption mode IKE with Preshared Key automatic Encryption Management Protocol When users set this VPN tunnel to use authentication mode users must set the parameter of this exchange password with that of the remote 100 Gigabit SSL VPN Security Router User s Manual IPSec Setting IKE with Preshared Key D
65. PN Summary Summary lo Tunnel s Used 60 Tunnel s Available p Tunnels Used 200 Tunnel s Available VPNTunnel s Status Jump to 11 se Page 5 entries perpage This VPN Summary displays the real time data with regard to VPN status These data include all tunnel numbers setting parameters and Group VPN and so forth Summary lo Tunnel s Used 60 Tunnel s Available lo Tunnel s Used 200 Tunnel s Available Detail Push this button to display the following information with regard to all current VPN configurations to facilitate VPN connection management WANT IF 1921684195 WAN IP 0 0 0 0 WANS IP 0 0 0 0 WAN IP 0 0 0 0 91 Gigabit SSL VPN Security Router User s Manual VPN Tunnel Status The following describes VPN Tunnel Status the current status of VPN tunnel in detail VPN Tunnel s Status Jump to Page 5 wie ntries per page AddTunnel s Previous Page Next Click Previous page or Next page to view the desired VPN tunnel page Or users Page Jumpto can select the page number directly to view all VPN tunnel statuses such as 3 5 Page Entries Per 10 20 or All Page Tunnel No To set the embedded VPN feature please select the tunnel number It supports up to 200 IPSec VPN tunnel Setting gateway to gateway as well as client to gateway Status Successful connection is indicated as Connected Failing hostname resolution is indicated as Hostname Resolution Fai
66. R FQDN Authentication 1 IP only If users decide to use IP only entering the IP address is the only way to gain access to this tunnel The WAN IP address will be automatically filled into this space Users don t need to do further settings DO 2 IP Domain Name FQDN Authentication If users select IP domain name type please enter the domain name and IP address The WAN IP address will be automatically filled into this space Users don t need to do further settings FQDN refers to the combination of host name and domain name and can be retrieved from the Internet e vpn server com This IP address and domain name must be identical to those of the VPN secure gateway setting type to establish successful connection IP Domain Name FQDN Authentication PCIE pd 3 IP E mail Addr USER FQDN Authentication If users select IP address and E mail enter the IP address and E mail address to gain access to this tunnel and the WAN IP address will be automatically filled into this space Users don t need to do further settings IF E maililUser FQDN Authentication IP Address wy 4 Dynamic IP Domain Name FQDN Authentication If users use dynamic IP address to connect to the device users may select this option to link to VPN If the remote VPN gateway requires connection to the device for VPN 107 Gigabit SSL VPN Security Router User s Manual connection this device will start authentication and respond to t
67. Set m User Edit IP Name IPGroup i Ad ow yt NH tol IP List Group Name Name ipaddress Y Edit Delete Mame Address A Delete Y It is the same setting methods You should set the IP address or the range of remote IP from the left side first and choose to add IP address information from the left side into the remote group 68 Gigabit SSL VPN Security Router User s Manual 7 7 Port Group Management Service ports can be grouping as IP grouping It is convenient to set QoS firewall access rules and other functions user edit port Port Group Set Port List Group Name po Name Protocol Port Delete Name Protocol Port Delete All Traffic BOTH 1 65535 DNS UDP 53 53 FTP TCP 21 21 HTTP TCP 30 80 a TCP 8080 8080 l HTTPS TCP 443 443 HTTPS secondary TOP 8443 8443 TFTP UDP 59 59 IMAP TCP 143 143 NNTP TCP 119 119 E POP3 TCP 110 110 SNMP UDP 161 161 SMTP TCP 25 25 3 z User edit port Input the name protocol and port range for the specific service port Name the Port in order to identify its property For example Virus 135 Protocol Choose the port protocol form the pull down list like TCP UDP or TCP and UDP Port Range Input the port range For example 135 to 135 Add to Port List After setting name protocol and port range push this button to add the information into th
68. TP Server PPTP IP Address Range IP Range Starts 1927 168 1 150 IP Range Ends 192 168 1 179 Unified IP Management New User Account i User s Defined Confirm Password fs IP Address Automatically Assign IP Address lll 110 Gigabit SSL VPN Security Router User s Manual Enabled PPTP Server When this option is selected the point to point tunnel protocol PPTP server can be enabled PPTP IP Address Please enter PPTP IP address range so as to provide the remote users with an Range entrance IP into the local network Enter Range Start Enter the value into the last field Enter Range End Enter the value into the last field All PPTP Status Displays all successfully connected users including username remote IP address and PPTP address Connection List o Tunnel s Used gg Tunnel s Available UserName Remote Address PPIPIPAddress Apply i Gemeel 10 1 3 VPN Pass Through VPN Pass Through Enabled Disabled Enabled Disabled Enabled Disabled Spa Cenes IPSec Pass If this option is enabled the PC is allowed to use VPN IPSec packet to pass in order to Through connect to external VPN device PPTP Pass If this option is enabled the PC is allowed to use VPN PPTP packet to pass in order to Through connect with external VPN device L2TP Pass If this option is enabled the PC end is allowed to use VPN L2TP packet to pass in 111 Gigabit SSL VPN Sec
69. TTPS TOP 443 443 gt 0 0 0 0 0 0 0 0 Delete selected Entry 45 Gigabit SSL VPN Security Router User s Manual When any intranet IP connects with TCP443 port or any destination 0 0 0 0 to O represents any destination it will go through the same WAN IP As for which WAN will be selected this follows the first chosen WAN IP distributed by the original session balance mechanism For example there are two intranet IP 192 168 100 1 and 192 168 100 2 When these intranet IPs first connects with TCP443 port 192 168 100 1 will go through WAN1 and 192 168 100 2 will go through WANZ Afterwards 192 168 100 1 will go through WAN1 when there are TCP443 port connections 192 168 100 2 will go through WAN2 when there are TCP443 port connections This rule is by default You can delete or add rules to meet your connection requirement 6 2 2 Network Detection Service This is a detection system for network external services If this option is selected information such Retry or Retry Timeout will be displayed If two WANs are used for external connection be sure to activate the NSD system so as to avoid any unwanted break caused by the device misjudgment of the overload traffic for the WAN Network Service Detection Interface Enable Retry count Retry timeout z When Fail Remove the Connection When In OR Y Out bandwidth is over Pa regarded as normal Default Gateway ISP Host O Remote Host O DNS Looku
70. The default is Auto After the changes are completed click Apply to save the configuration or click Cancel to leave without making any changes 2306 Gigabit SSL VPN Security Router User s Manual Router Plus NAT Mode When you apply a public IP address as your default gateway you can setup this public IP address into a LAN PC and this PC can use this public IP address to reach the Internet Others PCs can use NAT mode to reach the Internet If this WAN network is enabled the Router plus NAT mode you can still use load balancing function in this WAN network Interface MAN 1 WAN Connection Type WAN IP Address 0 Subnet Mask 255 Default Gateway o DNS Server Required o DNSServer Optional 0 LAN Default Gateway 1 LAN Public IP Range 1 LAN Public IP Range 2 e e 255 255 Ee o e e e p p p p e iii LAN Default Gateway 2 LAN Public IP Range 1 e LAN Public IP Range 2 o her FFE gga oge GEE EAE GEE AIBA COE GEE 38 LAN Default Gateway 3 o LAN Public IP Range 1 o LAN Public IP Range 2 o ll m Shared Circuit WAN environment Yes NO Filter broadcast packets from WAN MTU Auto Manual 1500 bytes _ Enabled Line Dropped Scheduling Line Dropped Period from 0 0 to do 24 Hour Format Line Dropped Scheduling minutes ahead line dropped to start new session transferrin
71. URITY ROUTER Wu cccececcecececeececececeseecececnscecececneeseeeeensnseeeeenenscseeeeenenenenss 11 CHAPTER 5 SYS FEMS TADS ai 13 DOME PACE research ine hacia ene se iste a e a al oc e a e osc lO ea 13 E AN ES II A A ects bec ia es nia A lc 13 Oe eZ IY SICAD POM Stat sad aa dat 15 SUS System ION AO ti ne i ee Ce nC 16 SUSE AAA AANE O A A AN 16 ES SS A II A NI SEE ee oT ee 17 De 1 LOG SENG AUS iia iii ip 17 5 2 CHANGE AND SET LOGIN PASSWORD AND TIME ccseeccccseccccccccccsecccccscecccaeccccseecccusescceaseccceuuseccueececauceceuaescs 17 52 Password SSiN innata 17 SPAAN E O A EEE E E E EA A E an en AE E A E 18 CHAPIER O NET WORK a a aa A O ENa aaa a aaa 20 O I NE MOR O ONNE OTON a e a ea aa O 20 6 1 1 Host Name and Domain Na ooonnnoccnnnccnnnocnnnoconnnocnnnocnonoconnnocnnnornonr nono nonnnn o nro rro nn rro nono rra rnnnrnnnnrcnnncnnnss 20 OAIE AA A en en ee 20 DT SLAN SENING A AN dde 20 LADIES da aa 21 Oko L DualeStack TP UP Vda PVG sad AAA ASA AAA AAA ion 22 0 TAWAN So DMZ SENGS ta it 24 OLA TIPO A E A AE A A AE E EAS A ARE E dos tobedeys 24 6 42 DualeStack IP Pyt and IO nara a n aaa 35 IV Gigabit SSL VPN Security Router User s Manual 5 2 MULTE VAIN SSE TING dd ed bd e lidac esas 39 6 2 1 Load Balance Mode 20 0 0 cece cc cccccccsccccccccccccecccccnecccsecccaccccneccusecccuecccnecensececsecceueccensceeusecceaesecuesecnseeeesecs 39 6 2 2 NETWOTK Detener el e dee e do o a 46 0 29 FTOOCO BING Oscarin
72. a client connects to the SSL VPN the port number will have to be entered after the address Change SSL VPN service port Service Port 443 w 11 9 3 Banner Set the headings for users web portal including enterprise and resource names Banner 11 9 4 Background pattern of the login page Background pattern of the login page Default pattern Customize your own background pattern Please make sure you have the rights to use this pattern before uploading Please upload a jpg or gif file The maximum acceptable file size ia 100KB Please use a 1024 x 763 pikel file to ensure the best resolution Administrator can choose to use customize pattern for login page The file format should be jpg or gif and the size should not be larger than 100KB Please use a 1024 x 768 pixel picture to ensure the best resolution 144 Gigabit SSL VPN Security Router User s Manual Chapter 12 Advanced Function This chapter will introduce to you the advance router settings In the advance settings you can 1 Setup DMZ servers forwarding to WAN for example the Web or FTP servers 2 Setup static routing entries or dynamic routing protocol 3 Setup one to one NAT function to mapping public IP address and private IP address 4 Setup dynamic DNS service 5 Setup MAC address in interfaces 12 1 DMZ Host Port Range Forwarding 12 1 1 DMZ Host DMZ Host DMZ Private IP Address 192 168 1 o When the NAT mode is activated s
73. able 10 100 182 168 4 10 149 fsz fes fa jia This function enables users to input IP segments that differ from the router network segment to the multi net segment configuration the Internet will then be directly accessible In other words if there are already different IP segment groups in the Intranet the Internet is still accessible without making any changes to internal PCs Users can make changes according to their actual network structure 6 1 3 2 Dual Stack IP IPv4 and IPv6 Users have to enable Dual Stack IP in the IP mode section in advance to configure IPv6 Then click the IPv6 tab and then enter the IPv6 Address and the Prefix Length The default IP address is fc00 1 and the default prefix length is 7 lt can be changed according to the actual network structure E Gigabit SSL VPN Security Router User s Manual IP Mode O rv ony e Dual Stack IP IPv4 and IPv6 IPv4 and IPv6 IPywd IPvb LAN setting o IPvb Address fc00 1 Prefix Length 7 Unified IP Management Click Unified IP Management to enter the configuration page as shown in the following figure Input the respective IP addresses and subnet masks LAN Setting IPv6 Address e00 31 00 Preta A asmenini Enable DHCP Server To configure global IPv6 prefixes for your LAN devices go to the WAN Setting click the IPv6 tab and click Edit for the W
74. access rules from internal to external or from external to internal Users may set different packets for IP address and communication port numbers to filter Internet access rules Network access rule follows IP address destination IP address and IP communications protocol status to manage the network packet traffic and make sure whether their access is allowed by the firewall 9 2 1 Default Rule The device has a user friendly network access regulatory tool Users may define network access rules They can select to enable disable the network so as to protect all internet access The following describes the internet access rules eo All traffic from the LAN to the WAN is allowed by default All traffic from the WAN to the LAN is denied by default All traffic from the LAN to the DMZ is allowed by default All traffic from the DMZ to the LAN is denied by default All traffic from the WAN to the DMZ is allowed by default All traffic from the DMZ to the WAN is allowed by default Users may define access rules and do more than the default rules However the following four extra service items are always on and are not affected by other user defined settings HTTP Service from LAN to Device is on by default for management DHCP Service from LAN to Device is set to on by default for the automatic IP retrieval DNS Service from LAN to Device is on by default for DNS service analysis Ping Service from LAN to Dev
75. admin as new username and password if they have to return back to default 5 2 2 Network Time VPN Router can adjust time setting Users can know the exact time of event occurrences that are recorded in the System Log and the time of closing or opening access for Internet resources You can either select the embedded NTP Server synchronization function or set up a time reference Set system time using a NTP server VPN Router has embedded NTP server which will update the time spontaneously 18 Gigabit SSL VPN Security Router User s Manual Metwork Time Set system time using a NTP server Set system time manually Beijing GMT 08 00 Ol Enabled trom 06 months Dayito 12 monthy25 Day Select your location from the pull down time zone list to show correct local time Daylight Saving If there is Daylight Saving Time in your area input the date range The device will adjust the time for the Daylight Saving period automatically NTP Server If you have your own preferred time server input the server IP address Apply After the changes are completed click Apply to save the configuration Cancel Click Cancel to leave without making any change This action will be effective before Apply to save the configuration Select System Time Manually Input the correct time date and year in the boxes Set system time using a NTP server Set system time manually Hours bo M
76. and click to delete Apply Activate the function The default setting is Disabled Exception IP address You can exempted some IP addresses or IP group from the Allow Domain 88 Gigabit SSL VPN Security Router User s Manual Exception Exception IP address T O 0 oO to I Delet Exception IP Enter the exempted IP addresses or IP group address Group Add to list Click this button to add exempted IP addresses or IP group Delete selected range Click this button to delete selected exempted IP address or IP group Content Filter Scheduling Select Always to apply the rule on a round the clock basis Select from and the operation will run according to the defined time For example if the control time runs from 8 a m to 6 p m Monday to Friday users may control the operation according to the following illustrated example Scheduling Apply this rule oo to oo 0 24 Hour Format Everday Sun hon Tue Wed Thu Fri Sal Ayaralhy Cancel 89 Gigabit SSL VPN Security Router User s Manual Select Always to apply the rule on a round the clock basis If From is selected the activation time is introduced as below Day Control This control rule has time limitation The setting method is in 24 hour format such as 08 00 18 00 8 a m to 6 p m 90 Gigabit SSL VPN Security Router User s Manual Chapter 10 VPN Virtual Private Network 10 1 Display All V
77. are on the Firmware Upgrade page Please confirm all information about the software version in advance Select and browse the software file click Firmware Upgrade Right Now to complete the upgrade of the designated file Please read the warning before firmware upgrade Users must not exit this screen during Attention upgrade Otherwise the upgrade may fail Firmware Upgrade Ml Browse Warning 1 Choosing previous firmware versions wil restore al settings to default 2 Firmwewars upgrading may take a few minutes dont tum off power or press i close he window OF deconnecl Surmg Upgrading process ont clo irg Al r 5 4 Please suspend on line iraffics when upgrading the ne Fimware Version v1 0 0 01 Mar 3 2011 17 05 09 13 3 Configuration Backup Import Configuration File Gam Export Configuration File Export Configuration File LI iP amp MAC Binding Ll aos Import Configuration File n Pare ara i E C Protocol Binding This feature allows users to integrate all backup content of parameter settings into the device Before upgrade confirm all information about the software version Select and browse the backup parameter file config exp Select the file and click Import to import the file Export Configuration File 159 Gigabit SSL VPN Security Router User s Manual This feature allows users to backup all parameter settings Click Export and select the location to save the
78. automatically adjust and _57 Gigabit SSL VPN Security Router User s Manual gather the connection speed and duplex mode Therefore if Enabled Auto Neg selected the ports setup will be done without any manual setting by administrators This feature allows administrators to set the LAN port to be one or more disconnected network sessions All of them will be able to log on to the Internet through the device Members in the same network session within the same VLAN can see and communicate with each other Members in different VLAN will not know the existence of other members VLAN All Set VLAN All port to be the public area of VLAN so that it can be connected to other VLAN networks A server should be constructed for the intranet so that all VLAN group can visit this server Set one of the network ports as VLAN All Connect the server to VLAN All so that computers of different VLAN groups can be connected to this server Moreover the port where the administrator locates must be set as VLAN All so that it can be connected to the entire network to facilitate network management Mirror Port Users can configure LAN 1 as mirror port by choosing Enable Port 1 as Mirror Port All the traffic from LAN to WAN will be copied to mirror port Administrator can control or filter the traffic through mirror port Once this function is enabled LAN 1 will be shown as Mirror Port in Physical Port Status Home page Physical Po
79. by5 b20udHeCCODXACEU3Zf fe BTAMBeNVHRMEBTADAOH MAOGCSgGS I b3DQEBBAUAASGBAAMUe feo0CWmryMV2 zN VmBepRacEkSEX63yJ uH2YkcPFcVVcddOSwSnkPxH QQhcUQuS TsdgJ MQ6FB45GP kKF PTcS1UkK9OKc3yaikwRxstGlVoizb Rtky hXpivpWrlZpBhOlKzobaw 30VEM RaWteLnI09XqV t m6x1A04B mm END CERTIFICATE If the SSL certificate is CER file users can translate file to PEM file format by Windows build in translation tool To export SSL certificate for administrator Administrators can not only export the completed SSL certificate from a SSL VPN Firewall Router but also import the certificate to others SSL VPN Firewall Router The file format is PEM file Please click Export Used Certificate for Administrator to export To export SSL certificate for User 141 Gigabit SSL VPN Security Router User s Manual Users can export the SSL certificate from PC excluding private key and import to other PCs The exported file Export Used Certificate for Client format is PEM file Please click to export To add CA certificate into trusted list List of trusted CA certificate O EntrustnetOU Www entrustnet O EntrustnetOLl www entrustnet CPS_ 2048 incorp by ref limits lia CPS 2048 incorp by ref limits lia b OU c 1999 Entrustnet Limited b VOU c 1999 Entrustnet Limited OS 2 aa CN Entrust net Certification Authority CN Entrustnet Certification Authority 2048 2048 IC IE D Baltimore OU Cyb
80. ce in which case the user may be required to take adequate measures Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiver 3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 4 Consult the dealer or an experienced radio technician for help II Gigabit SSL VPN Security Router User s Manual FCC Caution To assure continued compliance example use only shielded interface cables when connecting to computer or peripheral devices Any changes or modifications not expressly approved by the party responsible for
81. ckup The checked WANs will works in another device For an example if WAN1 and The Checked WANs WAN2 work in this device and WAN3 and WAN4 work in another WAN3 and are not working in this WAN4 should be checked device LAN Gateway Backup Input the LAN IP of Master device It should be different from Slave device s IP neem eE MAC Address of the Input the LAN MAC of Master device It should be different from Salve device s Status Normal indicates both devices work normally Status Backup indicates the Backup device is enabled for backing up Master device to take over WAN connection and DHCP issuing function 166 Gigabit SSL VPN Security Router User s Manual Chapter 14 Log From the log management and look up we can see the relevant operation status which is convenient for us to facilitate the setup and operation 14 1 System Log Its system log offers three options system log E mail alert and log setting Syslog Configuration _ Enable Syslog syslog Server Po Name or IF Address Log Setting L Syn Flooding LIP Spoofing C win Nuke Ping Of Death Unauthorized Login Attempt Deny Policies L Allow Policies Authorized Login View System Log Outgoing Log Table Incoming Log Table Clear Log Now System Log Syslog Configuration Enable Syslog syslog Server Pe Mame orlP Address 167 Gigabit SSL VPN Security Router User s Manual Enabled If this option is sele
82. ct of any disconnection can be minimized Line Dropped Period Line Dropped Period Input the time rule for disconnection of this WAN service the time rule Input the time rule for disconnection of this WAN service disconnection of this WAN service Line Dropped Input how long the WAN service may be disconnected before the newly added Scheduling connections should connections should go through another WAN to connect with the Internet through another WAN to connect with the Internet Backup Interface Select another WAN port as link backup when port binding is configured Users should select the port that employs the same ISP Link Backup Interface Select another WAN port as link backup when port binding is configured Users ieee rr Shared Circuit WAN lf your WAN connects to a Switch select Enabled to filter broadcast packets The default is Disabled MTU MTU is abbreviation of Maximum Transmission Unit Auto and Manual can be chosen The default value is 1500 Different value could be set in different network environment e g ADSL PPPoE MTU 1492 The default is Auto Click Apply to save the configuration or click Cancel to leave without making any changes 34 Gigabit SSL VPN Security Router User s Manual 6 1 4 2 Dual Stack IP IPv4 and IPv6 Users have to enable Dual Stack IP in the IP mode section in advance to configure the WAN with IPv6 addressing
83. cted the System Log feature will be enabled Syslog Server The device provides external system log servers with log collection feature System log is an industrial standard communications protocol It is designed to dynamically capture related system message from the network The system log provides the source and the destination IP addresses during the connection service number and type To apply this feature enter the system log server name or the IP address into the empty system log server field Log Setting Log Setting L Syn Flooding IF Spoofing _ vin Nuke L Ping Of Death Unauthorized Login Attempt LC Deny Policies Ll Allow Policies Authorized Login View System Log Outgoing Log Table Incoming Log Table Clear Log Now Alert Log The device provides the following warning message Click to activate these features Syn Flooding IP Spoofing Win Nuke Ping of Death Unauthorized Login Attempt Syn Flooding Bulky syn packet transmission in a short time causes the overload of the system storage of record in connection information IP Spoofing Through the packet sniffing hackers intercept data transmitted on the network After they access the information the IP address from the sender is changed so that they can access the resource in the source system Win Nuke Servers are attacked or trapped by the Trojan program Ping of Death The system fails because the sent data exceeds the maximum packet that can be handle
84. d Range Private Range Beginj182 168 Public Range Begin OPI Range Length Enable Multiple to One NAT C Enabled One to One NAT Private IP Range Input the Private IP address for the Intranet One to One NAT function Begin A Public IP Range Input the Public IP address for the Internet One to One NAT function rr nera nne omeo To activate or close the One to One NAT function Check to activate the function Range Length The numbers of final IP addresses of actual Internet IP addresses Please do not include IP addresses in use by WANSs Add to List Add this configuration to the One to One NAT list Delete Selected Remove a selected One to One NAT list ltem Apply Click Apply to save the network configuration modification Cancel Click Cancel to leave without making any changes 153 Gigabit SSL VPN Security Router User s Manual One to One NAT mode will change the firewall working mode If this function has been set up LES the Internet IP server or PC which is mapped with a LAN port will be exposed on the Internet Attentio n To prevent Internet users from actively connecting with the One on One NAT server or PC please set up a proper denial rule for access as described Firewall Multiple to One NAT Enable Multiple to One NAT Multiple to One NAT Private IP Range W tof U Representative Public IP Y ey I Interface WAN 1 Enable a
85. d and time Step 4 Set WAN connection Step 5 Set LAN connection physical port and IP address settings Step 6 Set QoS bandwidth management avoid bandwidth occupation Step 7 Set Firewall prevent attack and improper access to network resources Step 8 Other settings UPnP DDNS MAC Clone Step 9 Management and maintenance settings Syslog SNMP and configuration backup Step 10 VPN Virtual Private Network function setting Step 11 Logout 2 2 Setting Flow Chart Gigabit SSL VPN Security Router User s Manual Below is the description for each setting process and the correspondent contents and purposes Hardware installation N Set password and time Set WAN connection Set LAN connection physical port and IP address settings Set QoS bandwidth management avoid bandwidth occupation Set Firewall prevent attack and improper access to network resources Advanced Settings DMZ Forwardin g UPnP DDNS MAC Clone Management and maintenance settings Syslog SNMP and configuration backup 10 VPN Virtual Private Configure VPN tunnels Configure different types of VPN to meet Te E ION FE Verify device specification user s demand Login the device with Verify Firmware version Set time and re new password Verify WAN connection setting bandwidth allocation and protocol binding Set mirror port and VLAN Allocate and manage LAN IP Restrict bandwidth and session of WA
86. d by the IP protocol Unauthorized Login If intruders into the device are identified the message will be sent to the system log 168 Gigabit SSL VPN Security Router User s Manual General Log The device provides the following warning message Click to activate the feature System error message blocked regulations regulation of passage permission system configuration change and registration Deny Policies If remote users fail to enter the system because of the access rules for instance verification message will be recorded in the system log Allow Policies If remote users enter the system because of compliance with access rules for instance message will be recorded in the system log Authorized Login Successful entry into the system includes login from the remote end or from the LAN into this device These messages will be recorded in the system log The following is the description of the four buttons allowing online inquiry into the log View System Log This option allows users to view system log The message content can be read online via the device They include All Log System Log Access Log Firewall Log and VPN log which is illustrated as below System Log Current Time Sat Jan 1 11 41 43 2000 Jan 1 11 41 28 SSL VPN Security Router User admin login success from 192 168 1 1 2000 System Log User admin login success from 192 168 1 100 Outgoing Packet Log View system packet log which is
87. dded authentication services will be displayed on the Domain Management list 132 Gigabit SSL VPN Security Router User s Manual Authentication Authentication service types are displayed by authentication server name including Type Local Database Radius PAP CHAP MSCHAP MSCHAPV2 NT Domain Active Directory and LDAP Authentication Display configured external authentication server IP addresses Server IP Display authentication server group names Click on the Edit tab to select an authentication server IP address and edit authentication domain names Click on the clear tab to clear the selected authentication server Add New Domain See 11 3 Group Management 11 5 User Management In addition to selecting 12 3 Group Management to configure group settings SSL VPN can also provide inter group user management On the user management list each authentication server will display all self defined users that can be appointed to groups Domain Management User Management Step 3 Service Resource Management User Management admin Default Local Database mio lack All Users Supervisor 1 Mobile User Branch Staff Add new User Domain Name Select an authentication server to perform user management on from the drop down menu Authentication Displays the name of the authentication server type and also shows default is Local 133 Gigabi
88. dministrator users of the authentication server can still pass the authentication but they will not be able to access the web portal to use internal enterprise resources Click on the Edit tab to make changes to the server addresses and authentication domain names Authentication server type and authentication service name cannot be altered If you want to change the authentication server type and authentication service name delete them and then set up a new authentication server 118 Gigabit SSL VPN Security Router User s Manual A A Windows Internet Ex E E htp192 168 1 1 edit_sslvp _domain htr Active Directory AD Server Address Delete Click on the recycle bin icon to delete authentication server settings Adding New Authentication Service SSL VPN in addition to Local Database supports another 7 kinds of authentication server types Radius PAP CHAP MSCHAP MSCHSPV2 NT Domain Active Directory and LDAP 1 Local Database n M hitp 192 168 1 Ledit_sslvpn_domain htm Windows Internet Ex X E http 192 168 1 Aidit lvpn domain him E Authentication Type Local Data Base vi E ARAK Authentication Type Name the selected authentication server Click on the Apply tab to save changes Click Cancel to clear any recent changes to the settings 2 Radius PAP 119 Gigabit SSL VPN Security Router User s Manual Authenticatio
89. dth for connections from outside to the game server of a caf to update data In this way game players inside the caf will not be affected Min amp Max The minimum bandwidth The rule is to guarantee minimum available Rate Kbit Sec bandwidth The maximum bandwidth This rule is to restrict maximum available bandwidth The maximum bandwidth will not exceed the limit set up under this rule BS The unit of calculation used in this rule is Kbit Some software _ indicates download upload speed by the unit KB 1KB 8Kbit Bandwidth Assign Type Sharing total bandwidth with all IP addresses If this option is selected all IP addresses or Service Ports will share the bandwidth range from minimum to maximum bandwidth Assign bandwidth for each IP address If this option is selected every IP or Service Port in this range can have this bandwidth minimum to maximum For ee A Gigabit SSL VPN Security Router Users Manual SSL VPN Security Router User s Manual example If the rule is set for the IP of each PC the IP of each PC will have the same bandwidth If Share Bandwidth is selected be aware of the actual usage conditions and avoid an improper configuration that might cause a malfunction of the network when the bandwidth is too small ation For example if users do not want an FTP to occupy too much bandwidth users can select the Share Bandwidth Mode so that no matter how much users use FTPs to
90. dth is under__ then stop to stop to punish the IP which is over the limit While the bandwidth add new punished IP is over the certain percentage penalty mechanism will be actived Every __ second to detect whether Detect usage of internal IP s bandwidth every __ secend internal IP s bandwidth are over than limit If the punished IP still keep upper If the punished IP still keep over the limit the limit badwidth will bounded limit on then decrease its be decraseto bandwidth to_ When the usage of all WANs bandwith Smart QoS will be disabled when the usage of bandwidth is are lower than__ disable Smart Qos lower than __ Punished IP will be released after _ minute and after__minutes to release punished IP 76 Gigabit SSL VPN Security Router User s Manual 8 1 4 Exception IP address If some users are allowed to avoid traffic management control you can use this function to fulfill the requirement Exception IP address Interface wand O wan2 O wans O wana O use li I LJ to sGroup Direction Do not control upstream bandwidth Do not control downstream bandwidth O Do not control bi direction bandwidth Enabled selected item ina Vella al Enter the exempted IP range or select the exempted IP group Do not control Select do not control upload download or both of them Direction Enabled Enable this policy Add to Lit Add this policy into the exempted lis
91. e Mode Auto Load Balance Mode By Session Advanced Function O By IP Unbinding WAN Balance Un binding WAN Balance Mode O By Session Ginebra cue O ByIP Strategy Routing Mode O By Session Meu e O By IP strategy Routing Import IP Range Self defined Strategy 1 Self defined Strategy 2 Auto Load Balance Mode When Auto Load Balance mode is selected the device will use sessions or IP and the WAN bandwidth automatically allocate connections to achieve load balancing for external connections The network bandwidth is set by what users input for it For example if the upload bandwidth of both WANs is 512Kbit sec the automatic load ratio will be 1 1 if one of the upload bandwidths is 1024Kbit sec while the other is 512Kbit sec the automatic load ratio will be 2 1 Therefore to ensure that the device can balance the actual network load please input real upload and download bandwidths Session Balance If By Session is selected the WAN bandwidth will automatically allocate connections based on session number to achieve network load balance IP Session Balance If By IP is selected the WAN bandwidth will automatically allocate connections based on IP amount to achieve network load balance For either session balancing or IP connection balancing collocation with Protocol Binding will provide a more flexible application for bandwidth Users can assign a specific Intranet IP to go through a specific service provider for con
92. e O g Os g oO Interface WAN Enabled Service Management a E OC Shan Tella C Apal C Cemeal 49 Gigabit SSL VPN Security Router User s Manual Service This is to select the Binding Service Port to be activated The default such as ALL TCP amp UDP 0 65535 WWW 80 80 FTP 21 to 21 etc can be selected from the pull down option list The default Service is All 0 65535 Option List for Service Management Click the button to enter the Service Port configuration page to add or remove default Service Ports on the option list Users can assign packets of specific Intranet virtual IP to go through a specific WAN port for external connection In the boxes here input the Intranet virtual IP address range for example if 192 168 1 100 150 is input the binding range will be 100 150 If only specific Service Ports need to be designated while specific IP designation is not necessary input O in the IP boxes Destination IP In the boxes input an external static IP address For example if connections to destination IP address 210 11 1 1 are to be restricted to WAN1 the external static IP address 210 1 1 1 210 1 1 1 should be input If a range of destinations is to be assigned input the range such as 210 11 1 1 210 11 255 254 This means the Class B Network Segment of 210 11 x x will be restricted to a specific WAN If only specific Service Ports need to be designated while a specific IP
93. e Directory authentication server address Enter Active Directory authentication server s domain name For example planet com Click on the Apply tab to save changes Click Cancel to clear any recent changes to the settings 8 LDAP 123 Gigabit SSL VPN Security Router User s Manual http 11192 168 1 12edit_sslvpn_domain him Windows Internet Ex fa 0 K Authentication Type Domain Name LDAP Srv Address LDAP Base DN A BERK Authentication Select the authentication service type you wish to use from the drop down menu Type Domain Names Name the selected authentication server LDAP Enter authentication server address Address LDAP Base DN Enter LDAP authentication server s authentication domain name LDAP BaseDN Click on the Apply tab to save changes Cancel Click Cancel to clear any recent changes to the settings One Click SSL VPN provides one click setting With fewest configurations all users can use SSL tunnels to access an open internal resource While in All Users group the authentication server settings support the current enterprise authentication server So all users after being identified via the authentication server will be directed to the portal and can use the full range of enterprise resources For Authentication server settings see step one below Domain Management If you don t want all users to access the full range of available resources go to All Users gro
94. e Port list below This port can be from some port groups Group Name When you add new groups please note if the group name is in the column For example Virus Delete Group Choose the group that you would like to delete from the pull down list and push the Delete Group button System will ask you again if you would like to delete the group After pushing the confirmation button the group will be deleted inn You can choose several ports from Port list on the left side and push this button button to have them added into the group the right side Apply sd Click Apply to save the network configuration modification 69 Gigabit SSL VPN Security Router User s Manual Chapter 8 QoS Quality of Service QoS is an abbreviation for Quality of Service The main function is to restrict bandwidth usage for some services and IP addresses to save bandwidth or provide priority to specific applications or services and also to enable other users to share bandwidth as well as to ensure stable and reliable network transmission To maximize the bandwidth efficiency network administrators should take account of the practical requirements of a company a community a building or a caf etc and modify bandwidth management according to the network environment application processes or services 3 1 Bandwidth Management The Maximum Bandwidth provided by ISP WAN 4 10000 10000 WAN 2 10000 10000 WAN 3 10000 10000 WAN 4 10000 10000
95. e Select another WAN port as link backup when port binding is configured Users should select the port that employs the same ISP Shared Circuit WAN If your WAN connects to a Switch select Enabled to filter broadcast packets environment The default is Disabled MTU is abbreviation of Maximum Transmission Unit Auto and Manual can be chosen The default value is 1500 Different value could be set in different network environment e g ADSL PPPoE MTU 1492 The default is Auto After the changes are completed click Apply to save the configuration or click Cancel to leave without making any changes 30 Gigabit SSL VPN Security Router User s Manual Transparent Bridge If all Intranet IP addresses are applied as Internet IP addresses and users don t want to substitute private network IP addresses for all Intranet IP addresses ex 192 168 1 X this function will enable users to integrate existing networks without changing the original structure Select the Transparent Bridge mode for the WAN connection mode In this way users will be able to connect normally with the Internet while keeping the original Internet IP addresses in Intranet IP configuration If there are two WANs configured users still can select Transparent Bridge mode for WAN connection mode and load balancing will be achieved as usual Ra Interface MAR WAN Connection Type Transpare WAN IP Address Subnet Ma
96. e Selected Remove selected services ltem Show Table This is a list which displays the current active UPnP functions Apply Click Apply to save the network configuration modification 12 3 Routing In this chapter we introduce the Dynamic Routing Information Protocol and Static Routing Information Protocol Dynamic Routing Gateway Router O Enabled Disabled Static Routing pesti subnet Mask r yy Default Gateway IU HU FO Hop Count Interface LAN Shaw Tabla Apay Cancel 12 3 1 Dynamic Routing The abbreviation of Routing Information Protocol is RIP There are two kinds of RIP in the IP environment RIP and RIP II Since there is usually only one router in a network ordinarily just 149 Gigabit SSL VPN Security Router User s Manual Static Routing will be used RIP is used when there is more than one router in a network and if an administrator doesn t want to assign a path list one by one to all of the routers RIP can help refresh the paths RIP is a very simple routing protocol in which Distance Vector is used Distance Vector determines transmission distance in accordance with the number of routers rather than based on actual session speed Therefore sometimes it will select a path through the least number of routers rather than through the fastest routers Dynamic Routing Gateway Router O Enabled Disabled Working Mode Select the working
97. e for Assigned Routing the first WAN port WAN1 will be saved for the traffic of the IP addresses or the application service ports that are not assigned to other WANs WAN2 WANS and WAN4 Therefore in this mode we recommend assigning one of the connections to the first WAN When other WANs WAN2 WANS or WAN4 are broken and connection error remove Remove the Connection has been selected for the connection detection system traffic will be shifted to the first WAN WAN1 In addition if the first WAN WAN1 is broken the traffic will be shifted to other WANSs in turn For example the traffic will be shifted to WANZ first if WANZ2 is broken too the traffic will be shifted to WAN3 and so on 6 2 3 Protocol Binding WAN Setting The VPN Router allows maximum four WAN interface the bandwidth and real connection of every WAN will impact the load balance mechanism therefore you need to set the Bandwidth and the Network service detection by each WAN Port correctly In Interface Configuration click Edit to enter the WAN port configuration WAN Setting WAN 1 Obtain an IP automatically Edit WAN 2 Obtain an IF automatically Edit WAN 3 Obtain an IP automatically Edit WAN 4 Obtain an IP automatically Edit Bandwidth Management When Auto Load Balance mode is selected the WAN bandwidth will automatically allocate connections through sessions or IP to achieve load balancing for external connec
98. e time rule for the disconnection of this WAN service Line Dropped Input how long the WAN service may be disconnected before the newly added Scheduling connections should go through another WAN to connect with the Internet Link Backup Interface Select another WAN port as link backup when port binding is configured Users should select the port that employs the same ISP Shared Circuit WAN If your WAN connects to a Switch select Enabled to filter broadcast packets environment The default is Disabled MTU is abbreviation of Maximum Transmission Unit Auto and Manual can be chosen The default value is 1500 Different value could be set in different network environment e g ADSL PPPoE MTU 1492 The default is Auto After the changes are completed click Apply to save the configuration or click Cancel to leave without making any changes PPPoE This option is for an ADSL virtual dial up connection suitable for ADSL PPPoE Input the user connection name and password issued by ISP Then use the PPP Over Ethernet software built into the device to connect with the Internet If the PC has been installed with the PPPoE dialing software provided by ISP remove it This software will no longer be used for network connection Interface HAN l WAN Connection Type PPPoE bal Connect on Demand Max Idle Time Min Keep Alive Redial Period Sec Shared Circuit WAN environment O Yes a
99. e to establish successful connection IP Domain Name FOQDN Authentication lo Jo p a 3 IP E mail Addr USER FQDN Authentication If users select IP address and E mail enter the IP address and E mail address to gain access to this tunnel and the WAN IP address will be automatically filled into this space Users don t need to do further settings IP E mail User FQDN Authentication Ca Eb Jer 7 4 Dynamic IP Domain Name FQDN Authentication If users use dynamic IP address to connect to the device users may select this option to link to VPN If the remote VPN gateway requires connection to the device for VPN connection this device will start authentication and respond to this VPN tunnel connection if users select this option to link to VPN please enter the domain name Dynamic IP Domain NamefFoDN Authentication ka o J gt 5 Dynamic IP E mail Addr USER FQDN Authentication If users use dynamic IP address to connect to the device users may select this option to connect to VPN without entering IP address When VPN Gateway requires for VPN connection the device will start authentication and respond to VPN tunnel connection if users select this option to link to VPN enter E Mail address to the empty field for E Mail authentication A Dynamic IP E mail User FADMN Authentication w This option allows
100. eb Server Mail Sarver PC Finanoe Server Action Office Headquarters Mobile Office ADSL 224 A VDL LO0Base TX UTP I000Base T UTP 2 4GHz 0 iin ee ee WAN Connection A WAN port can be connected with xDSL Modem Fiber Modem Switching Hub or through an external router to connect to the Internet The device has 4 WAN ports If some of the ports are not in use WAN3 and WAN4 can be set up through software as LAN ports If only some of the WAN ports are to be used it is suggested to select WAN1 and WAN2 as the default choices for Internet connection LAN Connection The LAN port can be connected to a Switching Hub or directly to a PC DMZ port The DMZ port can be connected to servers that have legal IP addresses such as Web servers mail servers etc 10 Gigabit SSL VPN Security Router User s Manual This chapter is mainly introducing Web based Ul after connecting VPN Router First check up VPN Router IP address by connecting to DOS through the LAN PC under VPN Security Router Go to Start Run enter cmd to commend DOS and enter ipconfig for getting Default Gateway address as the graphic below 192 168 1 1 Make sure Default Gateway is also the default IP address of VPN QoS Router C Documents and Settings XPMB1 gt ipconf ig Windows IP Configuration Ethernet adapter Local Area Connection Connection specific DNS Suffix gt smb com IP Address Sy n E 192 168 1 168
101. eb cache cleaner Certificate Server RSA PKI Digital Certificate Host Check Virus Scan Personal Firewalls OS Patch Role based management Access Policy Management Logging and monitoring Syslog logging of SSL VPN events by user service and type of event Customized User Portal Allows Portal Layout Available Services to be customized Single sign on Allows Single Sign On for accessing multiple private network resources Group and Global Bookmark Support Enables users to access resources without needing to remember hostnames or IP addresses Tunnel quantity upgrade mechanism maras fe IPSec PPTP L2TP Pass through Gigabit SSL VPN Security Router User s Manual Chapter 2 Installation Procedure In this chapter we are going to introduce hardware installation Through the understanding of multi WAN setting process users can easily setup and manage the network making VPN Router functioning and having best performance 2 1 Systematic Setting Process Users can set up and enable the network by utilizing bandwidth efficiently The network can achieve the ideal efficiency block attacks and prevent security risks at the same time Through the process settings users can install and operate VPN Router easily This simplifies the management and maintenance making the user network settings be done at one time The main process is as below Step 1 Hardware installation Step 2 Login Step 3 Verify device specification and set up passwor
102. ebsite s security certificate The security certificate presented by this website was not issued by a trusted certificate authority The security certificate presented by this website was issued for a different website s address security certificate problems may indicate an attempt to fool you or intercept any data you send to the Server We recommend that you close this webpage and do not continue to this website Click here to close this webpage X Continue to this website not recommended E More information Windows Internet Explorer mn i PSL TTT ate La Le a Le Tae ee ae eee Te a ee eee Tee ee eee Te oe eT ee Te Tee Te Tee Ta Toe Tee Tee Te eee Te ee ae TY ss na n ee es ee ll Ge ye E hps 192 168 1 1 o e na ol el o ocio ciel Fie Edt View Favorites Tools Help Y Certificate Invalid The security certificate presented by this website has errors This problem might indicate an attempt to fool you ar intercept any data you send to the server We recommend that you clase this webpage About certificate errors View certificates 139 Gigabit SSL VPN Security Router User s Manual Certificate General Details Certification Path x Certificate Information This CA Root certificate is not trusted To enable trust install this certificate in the Trusted Root Certification Authorities store Issued to planet com tw Is
103. ecific destination IP that is not configured under the rules will go through other WANSs for external connection For unassigned WANs users can select Load Balance mode and select session or IP for load balancing Session Balance If By Session is selected the WAN bandwidth will automatically allocate connections based on session number to achieve network load balance IP Balance If By IP is selected the WAN bandwidth will automatically allocate connections based on the number of IP addresses to achieve network load balance Only when a device assignment is collocated with Protocol Binding can the balancing function be brought into full play For example an assignment requiring all Intranet IP addresses to go through WAN 1 when connecting with service port 80 or go through WAN 1 when connecting with IP 211 1 1 1 must be set up in the Protocol Binding Configuration When assigning mode is selected as in the above example the IP s or service provider s configured in the connection rule will follow the rule for external connections but those which are a not configured in the rule will still follow the device Load Balance system to go through other WAN Attentio ports to connect with the Internet n Please refer to the explanations in 6 2 3 Configuring Protocol Binding for setting up Protocol Binding and for examples of collocating router mode with Protocol Binding Strategy Routing Mode If strategy Rou
104. ed Line Dropped Scheduling Line Dropped Period from o to Jo 24 Hour Format Line Dropped Scheduling minutes ahead line dropped to start new session transferring Backup Interface Beck Apy Camel DA Gigabit SSL VPN Security Router User s Manual Use the following DNS Select a user defined DNS server IP address Sem fn DNS Server Input the DNS IP address set by ISP At least one IP group should be input Enable Line Dropped The WAN disconnection schedule will be activated by checking this option In Scheduling some areas there is a time limitation for WAN connection service For example The optical fiber service will be disconnected from 0 00 am to 6 00 am Although there is a standby system in the device at the moment of WAN disconnection all the external connections that go through this WAN will be disconnected too Only after the disconnected lines are reconnected can they go through the standby system to connect with the Internet Therefore to avoid a huge number of disconnection users can activate this function to arrange new connections to be made through another WAN to the Internet In this way the effect of any disconnection can be minimized Line Dropped Period Input the time rule for disconnection of this WAN service Line Dropped Input how long the WAN service may be disconnected before the newly added Scheduling connections should go through another WAN to connect with the Interne
105. ed by checking this option In Scheduling some areas there is a time limitation for WAN connection service For example the optical fiber service will be disconnected from 0 00 am to 6 00 am Although there is a standby system in the device at the moment of WAN disconnection all the external connections that go through this WAN will be disconnected too Only after the disconnected lines are reconnected can they go through the standby system to connect with the Internet Therefore to avoid a huge number of disconnections users can activate this function to arrange new connections through another WAN to the Internet In this way the effect of any disconnection can be minimized Line Dropped Period Input the time rule for the disconnection of this WAN service Line Dropped Input how long the WAN service may be disconnected before the newly added Scheduling connections should go through another WAN to connect with the Internet Link Backup Interface Select another WAN port as link backup when port binding is configured Users should select the port that employs the same ISP Shared Circuit WAN If your WAN connects to a Switch select Enabled to filter broadcast packets environment The default is Disabled MTU is abbreviation of Maximum Transmission Unit Auto and Manual can be chosen The default value is 1500 Different value could be set in different network environment e g ADSL PPPoE MTU 1492
106. elected VPN tunnel will keep this VPN connection This is mostly used to connect the remote node of the branch office and headquarter or used for the remote dynamic IP address NAT Traversal This option allowed the VPN connection can penetrate the NAT which in front of the router Dead Peer If this option is selected the connected VPN tunnel will regularly transmit HELLO ACK Detection DPD message packet to detect whether there is connection between the two ends of the VPN tunnel If one end is disconnected the device will disconnect the tunnel automatically and then create new connection Users can define the transmission time for each DPD message packet and the default value is 10 seconds Heart Beat If this option is selected the system periodically sends ICMP to the VPN tunnel remote server host the remote server will receive a packet after packet response If the number of detected more than the value you set and VPN remote server did not respond the 102 Gigabit SSL VPN Security Router User s Manual system will determine the VPN tunnel is disconnected If you create a VPN tunnel for the active side the system will automatically rebuild the VPN tunnel again and if you are a passive one the system will wait for the other re establish the VPN tunnel Remote Host Remote network nodes to detect the location the server address is best to be fast and stable response proposal can fill in the VPN remote Sever L
107. ent working mode Can be Gateway or Router mode The default is Gateway mode System active time Indicates how long the device has been running Serial Number This number is the device serial number Information about the device present software version Current Time Indicates the device present time To have the correct time users must synchronize the device with the remote NTP server first 5 1 4 Firewall Status Security Status status SPI Stateful Packet Indicates whether SPI Stateful Packet Inspection is on or off The default Inspection configuration is On DoS Denial of Service Indicates if Indicates if DoS attack prevention is activated The default configuration is On attack prevention is activated The default Indicates if DoS attack prevention is activated The default configuration is On is On Block WAN Request Indicates that denying the connection from Internet is activated The default Gigabit SSL VPN Security Router User s Manual Prevent ARP Virus Indicates that preventing Arp virus attack is acitvated The default configuration Attack is Off Remote Management Indicates if remote management is activated on or off Click the hyperlink to enter and manage the configuration The default configuration is Off Access Rule Indicates the number of access rule applied in VPN Security Router 5 1 5 VPN Status VPN Status
108. erTrustil Cr lE O Baltimore OU CyberTrust l May 12 23 59 00 N Baltimore CyberTrust Root N Baltimore CyberTrust Root 2025 GMT iC USfO Equifax Secure Inc CN Eq C US O Equifax Secure Inc CN Eq Jun 21 04 00 00 uifax Secure Global eBusiness CA 1 uifax Secure Global eBusiness CA 1 2020 GMT fC US O Equifax Secure Inc CN Eg C US 0 Equifax Secure Inc CN Eqg Jun 21 04 00 00 uifax Secure eBusiness CA 1 uifax Secure eBusiness CA 1 2020 GMT da E Users can also add CA certificate from trusted issuer Please click the Add tab to add into list To Generate Certificate Server Certificate Generation County Name M y eet 2 characters Province Name Organization Department FD Common Name required en required Valid Duration required unitdays We g 365 Generate CSR for third party certificate request Generate self signed certificate Generate CSR for third party certificate request Users can generate CSR for third party certificate request by clicking tab The exported file format is txt file You can also generate a self signed certificate The exported file format will be PEM file 11 9 Advanced Settings Advanced Settings can modify SSL connection ports amp add SSL upgrades Ag Gigabit SSL VPN Security Router User s Manual 11 9 1 Assign IP Range for Virtual Passage A virtual passage is a type of point to point SSL clie
109. eway Type must be identical to the remotely connected local security gateway authentication type Local Security Gateway Type Remote Security This remote gateway authentication type comes with five operation modes which are Gateway Type IP only Authentication by use of IP only IP Domain Name FQDN Authentication IP Domain name IP E mail Addr USER FQDN Authentication IP Email address Dynamic IP Domain Name FQDN Authentication Dynamic IP address Domain name Dynamic IP E mail Addr USER FQDN Authentication Dynamic IP address Email address name 1 IP only If users select the IP Only type entering this IP allows users to gain access to this tunnel Pow IF Only e BEE If the IP address of the remote client is unknown choose IP by DNS Resolved allowing DNS to translate IP address When users finish the setting the corresponding IP address will be displayed under the remote gateway of Summary IP Only ay 2 IP Domain Name FQDN Authentication If users select IP domain name please enter IP address and the domain name to be verified FQDN refers to the combination of host name and domain name Users may enter any name that corresponds to the domain name of FQDN This IP address and domain name must be identical to those of the remote VPN security gateway setting type to establish successful connection 98 Gigabit SSL VPN Security Router User s Manual
110. f the service port users want to activate on the list such as E donkey etc Protocol To select whether a service port is TCP or UDP Port Range To activate this function input the range of the service port locations users want to 147 Gigabit SSL VPN Security Router User s Manual ae Add to list Add the service to the service list Delete selected To remove the selected services item Apply Click the Apply button to save the modification Cancel Click the Cancel button to cancel the modification This only works before Apply is clicked Quit this configuration window 12 2 UPnP UPnP Universal Plug and Play is a protocol set by Microsoft If the virtual host supports UPnP system such as Windows XP users could also activate the PC UPnP function to work with the device UPnP Setup service DNS UDP 53 53 Name or IFP Address fs Enabled Service Management Add to list o Service Port Select the UPnP service number default list here for example WWW is 80 80 FTP is 21 21 Please refer to the default service number list Host Name or IP Input the Intranet virtual IP address or name that maps with UPnP such as Address 192 168 1 100 Enabled Activate this function Service Port Add or remove service ports from the management list Management 148 Gigabit SSL VPN Security Router User s Manual Add to List Add to active service content Delet
111. facture must therefore be allowed at all times to ensure the safe use of the equipment Customer Service For information on customer service and support for the Gigabit SSL VPN Security Router please refer to the following Website URL http www planet com tw Before contacting customer service please take a moment to gather the following information Gigabit SSL VPN Security Router serial number and MAC address Any error messages that displayed when the problem occurred e Any software running when the problem occurred Steps you took to resolve the problem on your own Revision User s Manual for PLANET Gigabit SSL VPN Security Router Model SG 4800 Rev 1 0 June 2012 M Gigabit SSL VPN Security Router User s Manual Table of Contents CHAPTER A INTRODUCTION ouusiipp iii AS 1 MS A E 1 Oe ACKAGE CONTENTS actas asada REC DES Js it el colo a op das nta 2 WS SPY SICAIL S PECIFIGATION EA EE S EE e oa oda a ao eee 2 AS PECIFIC A A NA 4 CHAPTER 2 INSTALLATION PROCEDURE cccceccccscececeecececncescececucnsnecececnenseeeeeuensneaeeuenenseeceaeenenenseeaeenens 6 2 1 SYSTEMATIC SETTING PROCESS cua ia a ae 6 O A eo eon EEO RE TET TE Ee ne Oe ES TO TLIO ee REET 7 CHAPTER 3 HARDWARE INSTALLATION aiii ii 9 3 1 INSTALLING THE DEVICE ON A STANDARD 19 RACK cccccccseccccccccccsccccccscccccucccccsececcuseccccuuccecuscececaceeceuecsecueseees 9 32 VEN ROUTER NETWORK CONNECTION ii eel a 10 CHAPTER 4 LOGIN VPN SEC
112. fault ISP auto dial connection when the network has been idle for a period of time the system will break the connection automatically The default time for automatic break off when no packets have been transmitted is five minutes Keep Alive This function enables the PPTP dial connection to redial automatically when the connection has been disconnected Users can set up the redialing time The default is 30 seconds Enable Line Dropped The WAN disconnection schedule will be activated by checking this option In Scheduling some areas there is a time limitation for WAN connection service For example the optical fiber service will be disconnected from 0 00 am to 6 00 am Although there is a standby system in the device at the moment of WAN disconnection all the external connections that go through this WAN will be disconnected too Only after the disconnected lines are reconnected can they go through the standby system to connect with the Internet Therefore to avoid a huge number of disconnection users can activate this function to arrange new connections to be made through another WAN to the Internet In this way the effect of any disconnection can be minimized Line Dropped Period Input the time rule for the disconnection of this WAN service Line Dropped Input how long the WAN service may be disconnected before the newly added Scheduling connections should go through another WAN to connect with the Internet Link Backup Interfac
113. g Backup Interface WAN IP address Enter the public IP address Enter the public IP address subnet mask 33 Gigabit SSL VPN Security Router User s Manual WAN default gateway Enter the WAN default gateway which provided by your ISP DNS Servers Enter the DNS server IP address you must have to enter a DNS server IP address maximum two DNS servers IP addresses available Intranet routing default Enter one of IP addresses that provide by the ISP as your default gateway gateway Intranet IP addresses Enter your IP addresses range which IP addresses are provided by ISP If you range have multiple IP ranges you need setup group1 and group 2 You can also setup the default gateway and IP range in the group 2 Enable Line Dropped The WAN disconnection schedule will be activated by checking this option In Scheduling some areas there is a time limitation for WAN connection service For example the optical fiber service will be disconnected from 0 00 am to 6 00 am Although there is a standby system in the device at the moment of WAN disconnection all the external connections that go through this WAN will be disconnected too Only after the disconnected lines are reconnected can they go through the standby system to connect with the Internet Therefore to avoid a huge number of disconnection users can activate this function to arrange new connections to be made through another WAN to the Internet In this way the effe
114. he device users may select this option to connect to VPN without entering IP address When VPN Gateway requires for VPN connection the device will start authentication and respond to VPN tunnel connection If users select this option to link to VPN enter E Mail address to the empty field for E Mail authentication This option allows users to set the local VPN connection access type The following offers a few items for local settings Please select and set appropriate parameters 1 IP address This option allows the only IP address which is entered to build the VPN tunnel me 09 1 e Reference When this VPN tunnel is connected computers with the IP address of 192 168 1 0 can establish connection 96 Gigabit SSL VPN Security Router User s Manual 2 Subnet This option allows local computers in this subnet can be connected to the VPN tunnel Reference When this VPN tunnel is connected only computers with the session of 192 168 1 0 and with subnet mask as 255 255 255 0 can connect with remote VPN 207 Gigabit SSL VPN Security Router User s Manual Remote Group Setup Remote VPN Group Setting Pony wt JEJE Jf ONO 2s 25 25 0 This remote gateway authentication type Remote Security Gat
115. his VPN tunnel connection if users select this option to link to VPN please enter the domain name Dynamic IF Domain Name FQDN Authentication 5 Dynamic IP E mail Addr USER FQDN Authentication lf users use dynamic IP address to connect to the device users may select this option to connect to VPN without entering IP address When VPN Gateway requires for VPN connection the device will start authentication and respond to VPN tunnel connection if users select this option to link to VPN enter E Mail address to the empty field for E Mail authentication Dynamic IP E mail User FADN Authentication ka O de sd IPSec Setup If there is any encryption mechanism the encryption mechanism of these two VPN tunnels must be identical in order to create connection And the transmission data must be encrypted with IPSec key which is known as the encryption key The device provides the IKE automatic encryption mode IKE with Preshared Key automatic Encryption Management Protocol When users set this VPN tunnel to use authentication mode users must set the parameter of this exchange password with that of the remote IPSec setting IKE with Preshared Key s Group 1 DES lt MDS seconds Group 1 MODS Ie seconds 108 Gigabit SSL VPN Security Router User s Manual IKE Protocol Click the shared key generated by IKE to encrypt and authenticate the remote user If PFS Perfect Fo
116. ic service protocols Other service protocols can still adopt the original balance mechanism to distribute the sessions equally and randomly With the original session balance efficiency advanced function can ensure the connection running without error for some special service protocols Mode Auto Load Balance Mode By Session Advanced Function By IP Unbinding WAN Balance Un binding WAN Balance Mode By Session EWM By IP Strategy Routing Mode O By Session Advanced Function O By IP strategy Routing Self defined Strategy 1 Self defined Strategy 2 Click Advanced Function to enter the setting window 43 Gigabit SSL VPN Security Router User s Manual 2 Destination Auto Binding User Define Dest IP or Port Auto Binding No Aging Time Protocol Port Range to TCOP 1863 1863 TCP 5050 5050 UDP s000 8005 Dalate selected Entry Destination Auto Binding Indicates that the session will be connected with the same WAN IP when the destination IP is in the same Class B range For example there are WAN1 1 200 10 10 1 and WAN2 200 10 10 2 and two intranet IP addresses When 192 168 1 100 visits Internet 61 222 81 100 for the first time the connection is through WAN1 200 10 10 1 If the next destination is to 61 222 81 101 in the same Class B range the connection will also be through WAN1 200 10 10 1 If the destination is to other IP not in the same Class B range as 61 2
117. ice is on by default for connection and test Access Rule Jump tol 1 Page 5 entries per page Next Page gt gt Allow All Traffic 1 LAN Any Any Always Deny All Traffic 1 USB Any Any Always Deny All Traffic 1 WANA Any Any Always Deny All Traffic 1 WAN Any Any Always Deny All Traffic 1 WANS Any Any Always Add New Rule Restore Default Rules In addition to the default rules all the network access rules will be displayed as illustrated above Users may follow or self define the priority of each network access rule The device will follow the rule priorities one by one so please make sure the priority for all the rules can suit the setting rules 83 Gigabit SSL VPN Security Router User s Manual Define the network access rule item Delete Remove the item Add New Rule Create a new network access rule Return to Default Rule Restore all settings to the default values and delete all the self defined settings 9 2 2 Add New Access Rule Service Allow All Traffic TOCP amp UDP AM 65535 Scheduling Service Management Apply this rule Always ml to OO 24 Hour Format Everyday sun Mon Tue Wed Thu Fri Sal Beck Amy Cameel Allow Permits the pass of packets compliant with this control rule Deny Prevents the pass of packets not compliant with this control rule Service Port From the drop down menu select the service that users grant or do not give permission
118. inutes seconds Month Day Year raky Cancel After the changes are completed click Apply to save the configuration Click Cancel to leave without making any change This action will be effective before Apply to save the configuration 19 Gigabit SSL VPN Security Router User s Manual Chapter 6 Network This Network page contains the basic settings For most users completing this general setting is enough for connecting with the Internet However some users need advanced information from their ISP Please refer to the following descriptions for specific configurations 6 1 Network Connection 6 1 1 Host Name and Domain Name Gigabit SSL VPN Security Router SSL YP Security Router SPLIT hy some a planeteom corn Required by some ISPs Device name and domain name can be input in the two boxes Though this configuration is not necessary in most environments some ISPs in some countries may require it 6 1 2 IP Mode Choose the type of addressing to use on your network IP Mode Cipva Only O P4 IPv4 O Dual Stack IP IPvd and IPv6 1Pva an d IPv6 IPv4 Only Use only IPv4 addressing Dual Stack IP Use IPv4 and IPv6 addressing So that you can configure both IPv4 and IPv6 addresses for LAN WAN and DMZ settings on this page
119. ion feature for connection setting of each port Port Setup Enable Port 1 as Mirror Port 1 LAN O 10M 100M Half Full Enabled Le 2 LAN O 10M 100M Half Full MEnabled 3 LAN O 10M 100M Half Full X Enabled 4 LAN O 10M 100M Half Full Enabled 5 LAN O 10M 100M Half Full Enabled 6 LAN O 10M 100M Half Full Enabled 7 LAN O 10M 100M Half Full MEnabled 8 LAN O 10M 100M Half Full MEnabled 9 WAN1 O 10M 100M Half Full Enabled 10 WAN2 O 10M 100M Half Full Enabled 11 WAN3 E 10M 100M Half Full Enabled 12 WAN4 oO 10M 100M Half Full Enabled 13 DMZ O 10M 100M Half Full Enabled Disabled This feature allows users turn on off the Ethernet port If selected the Ethernet port will be shut down immediately and no connection can be made The default value is on Priority This feature allows users to set the high low priority of the packet delivery for the Ethernet port If it is set as High the port has the first priority to deliver the packet The default value is Normal Speed This feature allows users to select the network hardware connection speed for the Ethernet port The options are 10Mbps and 100Mbps Duplex Status This feature allows users to select the network hardware connection speed working mode for the Ethernet The options are full duplex and half duplex Auto Neg The Auto Negotiation mode can enable each port to
120. ion transferring Backup Interface tem Description S O WAN IP address Input the available static IP address issued by ISP Input the subnet mask of the static IP address issued by ISP such as Issued eight static IP addresses 255 255 255 248 Issued 16 static IP addresses 255 255 255 240 Default Gateway Input the default gateway issued by ISP For ADSL users it is usually an ATU R IP address As for optical fiber users please input the optical fiber switching IP DNS Server Input the DNS IP address issued by ISP At least one IP group should be input The maximum acceptable is two IP groups Enable Line Dropped The WAN disconnection schedule will be activated by checking this option In Scheduling some areas there is a time limitation for WAN connection service For example the optical fiber service will be disconnected from 0 00 am to 6 00 am Although there is a standby system in the device at the moment of WAN disconnection all the external connections that go through this WAN will be disconnected too Only after the disconnected lines are reconnected can they go through the standby system to connect with the Internet Therefore to avoid a huge number of disconnections users can activate this function to arrange new connections to be made through another WAN to the Internet In this way the effect of any disconnection can be minimized Gigabit SSL VPN Security Router User s Manual Line Dropped Period Input th
121. isabled ERP Edit Disabled Add New Terminal Service 11 6 1 Resource Configuration SSL VPN supports common Microsoft terminal services including Word Excel PowerPoint Access Outlook IE FrontPage and ERP Administrators can also click on the Add New Terminal Service tab to add additional terminal services Resource Configuration Word Edit 1 Disabled Excel Edit 1 Disabled PowerPoint Edit 1 Disabled Access Edit 1 Disabled Outlook Edit 1 Disabled Internet Explorer Edit 1 Disabled FrontPage Edit 1 Disabled ERP Edit i Disabled Add New Terminal Service Resource Name Display resource name including SSL VPN supported terminal services like Word Excel PowerPoint Access Outlook IE FrontPage and ERP Display different service icons which will show on a user s web portal Host Address Display terminal server address Provides selected resource application program paths execution paths server 136 Gigabit SSL VPN Security Router User s Manual addresses and application program image editing SSL VPN supports built in application program paths c program files Microsoft office office windword exe If you have installed Microsoft terminal services that have a different server path modification will be required Microsoft terminal service is Disabled by default Once Microsoft terminal service server is set up and configured acti
122. its of users access to resources For example if a company has multiple FTP servers internally and when FTP service is activated then a group s users can connect through the web portal and enter the FTP servers if they want to access If an administrator has not activated FTP service but has only bookmarked one FTP then the group s users can only access the bookmarked FTP server Logout Service Service Terminal Application Intranet Service 2 a 4 A ds My Desktop ll Web Secure Web e My Network Place Book Mark virtual Passage Description Name IP Address Service 127 Gigabit SSL VPN Security Router User s Manual Resource Management web Secure Web Mbps VNC Telnet SoH FTP ape L Configure Bookmark for this Group Permit Customized Bookmark Configure Bookmark for this Group Permit Customized Bookmark Wh word Pere e
123. l then acquire a static virtual IP aan Address Input the static real MAC the address on the network card for the server or PC E which is to be bound For laa clients input the name or address of the client that is to be See ee selected item Remove the selected Remove the selected binding from the list e e the list ET Add new binding Add new binding Block MAC address on the list with wrong IP address When this option is activated MAC addresses which are not included in the list will not be able to connect with the Internet Show New IP user This function can reduce administrator s effort on checking MAC addresses one by one for the binding Furthermore it is easy to make mistakes to fill out MAC addresses on the list manually By checking this list administrator can see all MAC addresses which have traffic and are not bound yet Also if administrators find that one specific bound MAC address is shown on the list it means that the user changes the private IP address IP amp MAC binding List 192 168 1 100 00 1f c6 7b 8a bd 2 O Input the name or address Pe the client that is to be bound The maximum acceptable characters are 12 Enabled Choose the item to be bound 65 Gigabit SSL VPN Security Router User s Manual 7 6 IP Grouping IP Group function can combine several IP addresses or IP address ranges into several groups When you manage user internet access privileges by IP address you can
124. lease input the server TCP or UDP port number and the virtual host IP addresses Port Range Forwarding Service IP Address Y i i Interface ANY ka Enabled Add to list 146 Gigabit SSL VPN Security Router User s Manual e To select from this option the default list of service ports of the virtual host that users want to activate Such as All TCP amp UDP 0 65535 80 80 80 for WWW and 21 21 for FTP Please refer to the list of default service ports IP IP Address Input the virtual host IP address Interface Select the WAN port Interface Select the WAN port the WAN port Enabled Activate this function Service Add or remove service ports from the list of service ports Management Add to list Add to the active service content Service Port Management The services in the list mentioned above are frequently used services If the service users want to activate is not in the list we recommend that users use Service Port Management to add or remove ports as follows service Name All Traffic TCP amp UDPM 65535 DNS UDP 53 53 FTP TCOPI21 21 HTTP TCP 80 80 ees HTTP Secondary TCP 8080 8080 HTTPS TCP 443 443 HTTPS Secondary TCP 8443 8443 TFTP UDP 69 69 Port Range IMAP TCP 143 143 to NNTP TCP 119 119 POPS TCP 110 110 A SNMP UDP 161 161 SMTP TCP 25 25 TELNET TCP 23 23 TELNET Secondary TCP 8023 8023 Ul 4 _ Input the name o
125. led Resolving hostname is indicated as Resolving Hostname Waiting to be connected is indicated as Waiting for Connection If users select Manual setting for IPSec setup the status message will display as Manual and there is no Tunnel test function available for this manual setting Displays the current VPN tunnel connection name such as XXX Office Users are well advised to give them different names to avoid confusion should users have more than one tunnel settings If this tunnel is to be connected to other VPN device not this device some device requires that the tunnel name is identical to the name of the host end to facilitate verification This tunnel can thus be successfully enabled Phase2 Displays settings such as encryption DES 3DES authentication MD5 SHA1 Encrypt Auth Group and Group 1 2 5 If users select Manual setting for IPSec Phase 2 DH group will not display Local Group Displays the setting for VPN connection secure group of the local end Remote Group Displays the setting for remote VPN connection secure group the setting for remote VPN connection secure group Remote Gateway a the IP address to connect the remote VPN device Please set the VPN device 92 Gigabit SSL VPN Security Router User s Manual with a valid IP address or domain name Control Click Connect to verify the tunnel status The test result will be updated To disconnect click Disconnect to stop
126. mbers 0 0 0 0 in the boxes of Destination IP Which means to include all Internet IP addresses 54 Gigabit SSL VPN Security Router User s Manual Select WAN2 from the pull down option list Interface and then click Enable Finally click Add New and the rule will be added to the mode After the rule is set up only packets that go to Port 80 will be transmitted through WAN2 while other traffics will be transmitted through WAN1 Protocol Binding Semice HTTP TCP 80 80 w Service Management ie fis 1 jo Jwofo ej jie e r Interface WAN 2 e Enabled Update this Application HTTP TCP 60 80 gt 192 166 1 0 0 0 0 0 0 0 0 0 0 WAN 2 Delete selected item Add Example 2 How do configure Protocol Binding to keep traffic from all Intranet IP addresses from going through WAN2 when the destinations are IP 211 1 1 1 211 254 254 254 as well as the whole Class A group of 60 1 1 1 60 254 254 254 while traffic to other destinations goes through WAN1 As in the following figure there are two rules to be configured The first rule Select All Port TCP amp UDP 1 65535 from the pull down option list Service and then in the boxes of Source IP input 192 168 1 0 0 which means to include all Intranet IP addresses In the boxes for Destination IP input 211 1 1 1 211 254 254 254 Select WAN2 from the pull down option list Interface and then click
127. n Type Domain Name Radius Srv Radius PassWord Authentication Select the authentication server type from the drop down menu Type Name the selected authentication server RADIUS Srv Enter authentication server address Radius Enter the password for RADIUS Password Click on the Apply tab to save changes Click Cancel to clear any recent changes to the settings 3 Radius CHAP C http 192 168 1 1 edit_sslvpn_domain htm Windows Internet Ex X E http 166 1 Ledit slvpn domain hin Authentication Type Domain Name Radius Srv Radius PassWord A O BEBE Authentication Select the authentication server type from the drop down menu Type 120 Gigabit SSL VPN Security Router User s Manual Name the selected authentication server RADIUS Srv Enter authentication server address Radius Enter the password for RADIUS Password Click on the Apply tab to save changes Click Cancel to clear any recent changes to the settings 4 Radius MSCHAP E http 192 168 1 1 edit sslvpn_domain hi Authentication Type Domain Name Radius Sry Radius PassWord Authentication Select the authentication server type from the drop down menu Type Name the selected authentication server RADIUS Srv Enter authentication server address Radius Enter the password for RADIUS Password Click on the Apply tab to save changes Click Cancel to clear any recent changes to the settings
128. name for abcDDNS The password which is set up for DDNS Input the website address which has been applied from DDNS Examples are abc dyndns org or xyz 3322 org Internet IP Input the actual dynamic IP address issued by the ISP Address Status Status An indication of the status of the current IP function refreshed by DDNS Apply After the changes are completed click Apply to save the network configuration modification Cance Cancel Click Cancel to leave without making any changes 156 Gigabit SSL VPN Security Router User s Manual 12 6 MAC Clone Some ISP will request for a fixed MAC address network card physical address for distributing IP address which is mostly suitable for cable mode users Users can input the network card physical address MAC address 00 xx xx xx xx xx here The device will adopt this MAC address when requesting IP address from ISP MAC Clone ANA 50 56 4D 32 30 31 WAN 50 56 4D 32 30 32 ANS 50 56 4D 32 30 33 50 56 4D 32 30 34 Select the WAN port to which the configuration is to be edited click the hyperlink to enter and edit its configuration Users can input the MAC address manually Press Apply to save the setting and press Cancel to remove the setting Default MAC address is the WAN MAC address Interface HAN 1 so se Han Hae Hao Llar Default 50 56 4D 32 30 31 O 00 1F C6 7B 84 BD 157 Gigabit SSL VPN Security Route
129. nection or assign an IP for a specific destination to go through the WAN users assign to connect with the Internet For example if users want to assign IP 192 168 1 100 to go through WAN 1 when connecting with the Internet or assign all Intranet IP to go through WAN 2 when connecting with servers with port 80 or assign all Intranet IP to go through WAN 1 when connecting with IP 211 1 1 1 users can do that by configuring Protocol Binding When the Auto Load Balance mode is collocated with Protocol Binding only IP addresses or SES servers that are configured in the connection rule will follow the rule for external connections Attention mm those which are not configured in the rule will still follow the device Auto Load Balance system 39 Gigabit SSL VPN Security Router User s Manual Please refer to the explanations in 6 2 3 Configuring Protocol Binding for setting up Protocol Binding and for examples of collocating router modes with Protocol Binding Unbinding WAN Balance Mode This mode enables users to assign specific intranet IP addresses destination application service ports or destination IP addresses to go through an assigned WAN for external connection After being assigned the specific WAN will only support those assigned Intranet IP addresses specific destination application service ports or specific destination IP addresses Intranet IP specific destination application service ports and sp
130. nrenanarnnanas 91 10 15 DISPLAY ALLEN Ni SUMMA Y e di de Nas 91 AO AA 0 New VEN TUNNE A O 94 1011 Gateway lo Gateway Sets net id asin a 94 10 112 Chentto Gateway Settimo Mitte TE ALUTO Persia A AAA A ii 104 LO A e Ss ARAS OCP EEE E EE E A ne 110 IDAS Y ENDPass INTO sra tit 111 CHAPTER 112 SSE VPN tices e e en eh oo nen EA 113 ti y aan O II A AO 113 E ESOS A II II E VEEE A A 113 11 3 GROUP MANAGEMENT s ccccsecccccsecccccceccccceccuseccccacccecsescecaueecccauececuecseccuscececsuceccusccceeuecsceuaceceuaeceeaceecuaescs 115 Gigabit SSL VPN Security Router User s Manual 11 14 DOMAIN MANAGEMEN Se E E 132 11 5 USER MANAGEMENT secs loaicoesici atole cuco pirita 133 11 6 SERVICE RESOURCE MANAGEMENT ss deci ettn ad dci lle ta della 136 11 6 1 Resource Configura lO ias laa 136 MoT EIN TOs PORTAL a a 138 11 8 CERTIFICATE MANAGEMENT ccoo ato pia iris 138 MiS ADVANCED SETTINO Sii ios 142 11 9 1 Assign IP Range for Virtual PassSage ooocccoooonncccnnonnnnncnnnaannnnononannnnononananoncnonnnn nro conan nn nnccnnnna canos 143 TES 2 Change Sok VPINServICO DOM id dois 144 IHES ES Aan E E E EE O A T E E stone E T 144 11 9 4 Background pattern of the login PAYE ccooooooncconononacocononananoconannnnncoonannnnnconnnnnnononnnannnncconnannnnnos 144 CHAPTER 12 ADVANCED FUNCTION ivonne 145 12 1 DMZ HosT PORT RANGE FORWARDING cc cccsssccesseceseeceeeceseecesceseaceceaeeseaeeseaeeseaeeeeaeeseaeeceaeeeeaeeeeaee
131. ns Service Port Select what bandwidth control is to be configured in the QoS rule If the bandwidth for all services of each IP is to be controlled select All TCP amp UDP 1 65535 If only FTP uploads or downloads need to be controlled select FTP Port 21 21 Refer to the Default Service Port Number List IP Address This is to select which user is to be controlled If only a single IP is to be restricted input this IP address such as 192 168 1 100 to 100 The rule will control only the IP 192 168 1 100 If an IP range is to be controlled input the range such as 192 168 1 100 150 The rule will control IP addresses from 192 168 1 100 to 150 If all Intranet users that connect with the device are to be controlled input O in the boxes of IP address This means all Intranet IP addresses will be restricted QoS can also control the range of Class B Upstream Means the upload bandwidth for Intranet IP Downstream Means the download bandwidth for Intranet IP Server in LAN Upstream If a Server for external connection has been built in the device this option is to control the bandwidth for the traffic coming from outside to this Server Server in LAN Downstream If there are web sites built in the Intranet this option is to control the upload bandwidth for the connections from outside to this Server For example game servers have been built in many Internet caf s This rule can be used to control the bandwi
132. nt connection When remote users use a secure tunnel to connect SSL VPN will establish a virtual web interface For this reason you will need to set SSL VPN s secure tunnel client address range so it does not conflict with your company s Internet DHCP IP Default for 5 SSL users is 192 168 1 200 to 192 168 1 205 Assign IP Range for Virtual Passage Client Address Range starts 192 168 1 200 ClientAddress Range Ends 192168 1 205 Unified IP Management Unified IP Management The Unified IP Management configuration window can set LAN IP range DHCP IP range SSL virtual passage IP range and PPTP IP address range When the client uses SSL secure tunnel to connect to SSL VPN SSL VPN will assign a LAN IP address to the user You can use SSL VPN s supported SSL tunnels to adjust client start addresses and client end addresses to provide ample LAN IP the SSL secure tunnel clients Ensure that the secure tunnel IP range doesn t conflict with the DHCP IP range or the PPTP secure tunnel IP range Assign IP Range for Virtual Passage Client Address Range starts Client Address Range Ends 192 E 143 Gigabit SSL VPN Security Router User s Manual 11 9 2 Change SSL VPN service port The SSL default port is 443 If port 443 is being used by another internal application you can use the SSL VPN s service port drop down menu to select a different one 10443 20443 Remind If you change a port other than the default 443 when
133. nt users SSLiumelrenotePacsesses Logout when clicking on the icon 11 2 Group Summary Group Summary table displays group setting information Group settings can be modified here and new users can also be added 113 Gigabit SSL VPN Security Router User s Manual SIA All Users Default Details Details Y Enabled Supervisor Defaut Details Details A Disabled Mobile User Default Details Details f Disabled Branch Staff Default Details Details f Disabled Add Group Display the group s name SSL VPN has 4 built in groups by default All Users Supervisor Mobile User amp Branch Staff If one group needs to be edited click on its name to access the group management page Display the authentication server name used corresponding to certain group which is served as Local Database by default Click Detail to view a specific group s user names and types E summary Windows Internet Explorer Group Name All Users Resource Click Detail to view a specific group s available service resources The 4 default group s authentication service resources are all listed in the following service resource configuration explanation ya Summary Windows Internet Explorer e hto192 168 1 L pn summary resourcelist him resurcesroup 4 l T T Group Name All Users Web Secure Web Telnet Terminal Semice RDF Activex Virtual Network Computing My Network Place Vir
134. ntrol everyday If users only certain days of a week should be under control users may select the desired days directly Apply Click Apply to save the configuration Cance Click Cancel to leave without making any change 85 Gigabit SSL VPN Security Router User s Manual 9 3 URL Filter The device supports two webpage restriction modes one is to block certain forbidden domains and the other is to give access to certain web pages Only one of these two modes can be selected Block Forbidden Domains A Accept Allowed Domains Forbidden Domains Enabled Enable Website Blocking by Keywords Scheduling Apply this rule Always 00 to 00 00 24 Hour Format Sun Mon L Tue L Wed LI Thu L Fri LI Sat Block Forbidden Domain Fill in the complete website such as www sex com to have it blocked Block Forbidden Domains Accept Allowed Domains Forbidden Domains Enabled Forbidden Domains add ExceptoniP address Je Jo Jul Group test IP Grouping Add to list Delete selected domain 86 Gigabit SSL VPN Security Router User s Manual Forbidden Domains Click to enable the forbidden domains function Default is Disabled Input the website to be controlled For example www playboy com Exception IP Address Input the IP or IP ranges not to be controlled Enabled Add to list Click Add to list to create a new website to be controlled Delete selected
135. of the DNS server WINS If there is a WIN server in the network users can input the IP address of that server directly WINS Server Input the IP address of WINS Apply Click Apply to save the network configuration modification cancel si Click Cancel to leave without making any changes 61 Gigabit SSL VPN Security Router User s Manual 7 4 DHCP Status This is an indication list of the current status and setup record of the DHCP server The indications are for the administrator s reference when a network modification is needed Status subnetl subnet2 subnet3 subnetd 192 168 1 1 192 168 2 1 192 168 3 1 192 168 4 1 1 0 0 D 0 0 0 0 49 50 50 50 50 50 50 50 Client Table NB97006 192 168 1 100 00 1f c6 7b 8a bd 4 Minutes 42 Seconds i Reel DHCP Server This is the current DHCP IP This is the current DHCP IP Static IP Used The amount of static IP assigned by DHCP 62 Gigabit SSL VPN Security Router User s Manual 7 5 IP 8 MAC Binding Administrators can apply IP amp MAC Binding function to make sure that users can not add extra PCs for Internet access or change private IP addresses IP amp MAC binding Siatic IP o fo f fo MAC Address Name po Enabled C Block MAC address on the list with wrong IP address C Block MAC address not on the list There are two methods for setting up this function Block MAC address on
136. olation Connection Refused Policy violation Clear Log Now This feature clears all the current information on the log UDP 192 168 2 1 6 gt 255 255 255 25558 on ip UDP 192 168 1 100 137 192 168 1 255 137 on ixp0 UDP 192 168 2 1 67 gt 192 168 2 102 68 on ixp2 UDP 192 168 2 1 67 gt 192 168 2 100 68 on ixp4 UDP 192 166 171 100 7464 gt 75 126 47 25327220 on ixpd UDP 192 166 1 100 7464 91 153 161 189 27310 on ixp0 UDP 192 162 1 100 7464 24 160 250 156 19343 on ixp 170 Gigabit SSL VPN Security Router User s Manual 14 2 System Statistic The device has the real time surveillance management feature that provides system current operation information such as port location device name current WAN link status IP address MAC address subnet mask default gateway DNS number of received sent total packets number of received sent total Bytes Received and Sent Bytes Sec total number of error packets received total number of the packets dropped number of session number of the new Session Sec and upstream as well as downstream broadband usage System Statistic Next Page WAN 1 WAN 2 WAN 3 WAN 4 etn ethi2 eth3 ethd Connect Enabled Enabled Enabled 921664103 0 0 0 0 0 0 0 0 0 0 0 0 00 30 4F 32 30 31 Pa aama A 192 168 4 1 192 188 5 121 00 30 4F 32 30 32 DD 30 4P 32 30 33 00 30 4P 32 30 34 Test Succeeded Test Failed Test Failed Test
137. ometimes users may need to use applications that do not support virtual IP addresses such as network games We recommend that users map the device actual WAN IP addresses directly to the Intranet virtual IP addresses as follows If the DMZ Host function is selected to cancel this function users must input 0 in the following DMZ Private IP This function will then be closed After the changes are completed click Apply to save the network configuration modification or click Cancel to leave without making any changes 145 Gigabit SSL VPN Security Router User s Manual 12 1 2 Port Range Forwarding Setting up a Port Forwarding Virtual Host If the server function which means the server for an external service such as WWW FTP Mail etc is contained in the network we recommend that users use the firewall function to set up the host as a virtual host and then convert the actual IP addresses the Internet IP addresses with Port 80 the service port of WWW is Port 80 to access the internal server directly In the configuration page if a web server address such as 192 168 1 50 and the Port 80 has been set up in the configuration this web page will be accessible from the Internet by keying in the device actual IP address such as http 211 243 220 43 At this moment the device actual IP will be converted into 192 168 1 50 by Port 80 to access the web page In the same way to set up other services p
138. ory Default Return to Factory Default Setting Restart As the figure below if clicking Restart Router button the dialog block will pop out confirming if users would like to restart the device Restart Message from webpage J Are YOU sure you want to restart router Factory Default Return to Factory Default Setting Return to Factory Default Setting If clicking Return to Factory Default Setting the dialog block will pop out if the device will return to factory default Its recommended to save the current configuration before upgrading firmware After firmware upgraded import the configuration file after returning to factory default to ensure system stable Please refer to 12 3 13 6 High Availability High Availability is adopted in the network that requires fault tolerance and backup mechanism Two similar devices are used to be the backup for each other One of these devices is employed for major network transmitting and the other redundant device will take over when the master device fails to assure that network transmitting and services never break down Therefore administrators will have more opportunity and time to deal with the master device problems 162 Gigabit SSL VPN Security Router User s Manual Besides general HA Planet also provides advanced HA function that enables two devices to operate simultaneously It brings full cost efficiency without making another device idle lt does
139. p Host fe DOJO e Retry Timeout Delay time for external connection detection latency The default is 30 seconds After the retry timeout external service detection will restart When Fail 1 Generate the Error Condition in the System Log If an ISP connection failure is detected an error message will be recorded in the System Log This line will not be removed therefore the some of the users on this line will not have normal connections 46 Gigabit SSL VPN Security Router User s Manual This option is suitable under the condition that one of the WAN connections has failed the traffic going through this WAN to the destination IP cannot shift to another WAN to reach the destination For example if users want the traffic to 10 0 0 1 10 254 254 254 to go only through WAN1 while WANZ2 is not to support these destinations users should select this option When the WAN1 connection is disconnected packets for 10 0 0 1 10 254 254 254 cannot be transmitted through WAN 2 and there is no need to remove the connection when WAN 1 is disconnected 2 Keep System Log and Remove the Connection If an ISP connection failure is detected no error message will be recorded in the System Log The packet transmitted through this WAN will be shifted to the other WAN automatically and be shifted back again when the connection for the original WAN is repaired and reconnected This option is suitable when one of the WAN connec
140. r User s Manual Chapter 13 System Tool System Tool This chapter introduces the management tool for controlling the device and testing network connection For security consideration we strongly suggest to change the password Password and Time setting is in Chapter 5 2 13 1 Diagnostic The device provides a simple online network diagnostic tool to help users troubleshoot network related problems This tool includes DNS Name Lookup Domain Name Inquiry Test and Ping Packet Delivery Reception Test O DNS Lookup Ping DNS Name lookup On this test screen please enter the host name of the network users want to test For example users may enter www yahoo com tw and press Go to start the test The result will be displayed on this page DNS Lookup OPing Mame Www yahoo com tw Address 203 64 219 114 Ping O DNS Lookup Ping Ping host or IP address 168 95 1 1 status Test Succeeded Packets 4 4 transmitted 4 4 received 0 loss Minimum 3 2 ms Round Trip Time Maximum 3 7 ms Average 3 4 ms This item informs users of the status quo of the outbound session and allows the user to know the existence of computers online On this test screen please enter the host IP that users want to test such as 168 95 1 1 Press Go to start the test The result will be displayed on this screen 158 Gigabit SSL VPN Security Router User s Manual 13 2 Firmware Upgrade Users may directly upgrade the device firmw
141. rt Status Internet Internet Internet Internet internet OMZ WAN 1 WAN 2 WAN 3 WAN 4 DMZ Enabled Enabled Enabled Enabled Enabled 1 2 3 4 5 E T 8 Mirror Port LAN Enabled Connect Enabled Enabled Enabled Enabled Enabled Enabled 58 Gigabit SSL VPN Security Router User s Manual 7 2 Port Status Summary 10Base T 100Base Tx 1000Base T Port Enabled Normal Enabled Statistics 3191 29016 7079145 59 Gigabit SSL VPN Security Router User s Manual Summary There are Network Connection Type Interface Link Status Up Down Port Activity Port Enabled Priority Setting High or Normal Speed Status 10Mbps 100Mbps or 1000Mbps Duplex Status half duplex or full duplex Auto Neg Enabled Disabled and VLAN Statistics The packet data of this specific port will be displayed Data include receive transmit packet count receive transmit packet Byte count and error packet count Users may press the refresh button to update all real time messages 7 3 IP DHCP With an embedded DHCP server it supports automatic IP assignation for LAN computers This function is similar to the DHCP service in NT servers It benefits users by freeing them from the inconvenience of recording and configuring IP addresses for each PC respectively When a computer is turned on it will acquire an IP address from the device automatically This function is to make management easier Enabled DHCP Server DHCP
142. rward Secrecy is enabled the Phase 2 shared key generated during the IKE coordination will conduct further encryption and authentication When PFS is enabled hackers using brute force to capture the key will not be able to get the Phase 2 key in such a short period of time Perfect Forward When users check the PFS option don t forget to activate the PFS function of the VPN Secrecy device and the VPN Client as well Phase 1 Phase 2 This option allows users to select Diffie Hellman groups Group 1 Group 2 Group 5 DH Group Phase 1 Phase 2 This option allows users to set this VPN tunnel to use any encryption mode Note that Encryption this parameter must be identical to that of the remote encryption parameter DES 64 bit encryption mode 3DES 128 bit encryption mode AES the standard of using security code to encrypt information It supports 128 bit 192 bit and 256 bit encryption keys Phase 1 Phase 2 This authentication option allows users to set this VPN tunnel to use any authentication Authentication mode Note that this parameter must be identical to that of the remote authentication mode MD5 or SHA Phase 1 SA Life The life time for this exchange code is set to 28800 seconds or 8hours by default This Time allows the automatic generation of other exchange password within the valid time of the VPN connection so as to guarantee security Phase2 SA Life The life time for this exchange code is set
143. s feature may prevent the attack by this type of virus Advanced Setting Advance DoS Settings WAN Threshold LAN Threshold Threshold counted by all packets Threshold counted by all packets 15000 Packets Sec 50000 Packets Sec Single Destination IP Threshold Packets Sec Threshold counted by single IP packet Si 5000 aleaar PacketsiSet single Source IF Threshold 5000 Packets Sec Block this IP when reach threshold Minutes Block this IP when reach threshold 1 _ Minutes Threshold counted by all packets Threshold counted by all packets Packets Sec Packets Sec Single Destination IP Threshold Packets Sec Threshold counted by single IP packet Si 5000 e fcr Packets Sec single Source IP Threshold 5o00 Packets Sec Block this IP when reach threshold Minutes Block this IP when reach threshold Minutes Threshold counted by all packets Threshold counted by all packets Packets S5ec Packels Sec Single Destination IP Threshold Packets Sec Threshold counted by single IP packet aj 50 ta Packets Sec single Source IP Threshold Packets Sec Block this IP when reach threshold 5 Minutes Block this IP when reach threshold Minutes Pada o jo o tesGroup tes 81 Gigabit SSL VPN Security Router User s Manual Packet Type This device provides three types of data packet transmission TCP SYN Flood UDP Flood and ICMP Flood WAN Threshold When all packet values from external attack or from
144. s issued by an ISP into the relevant boxes Interface WAH 1 WAN Connection Type WAN IP Address Prefix Length Detault Gateway puSServer Required SSCS puSServer Optional OSS MTU Auto Manual 1500 bytes WAN IP Address Input the available static IP address issued by ISP Prefix Length The prefix length specified by your ISP Default Gateway Input the default gateway issued by ISP For ADSL users it is usually an ATU R IP address As for optical fiber users please input the optical fiber switching IP DNS Servers Enter the DNS server IP address you must have to enter a DNS server IP a address maximum two DNS servers IP addresses available MTU Auto and Manual can be chosen The default value is 1500 Different value could be set in different network environment e g ADSL PPPoE MTU 1492 The default is Auto Click Apply to save the configuration or click Cancel to leave without making any changes 36 Gigabit SSL VPN Security Router User s Manual DMZ Setting For some network environments an independent Configurable DMZ port may be required to set up externally connected servers such as WEB and Mail servers Therefore the device supports a set of independent Configurable DMZ ports for users to set up connections for servers with real IP addresses The DMZ ports act as bridges between the Internet and LANs DMZ Setting DMZ 0 0 0 0 Edit apap Genea
145. seconds or 8hours by default This Time allows the automatic generation of other exchange password within the valid time of the VPN connection so as to guarantee security Phase2 SA Life The life time for this exchange code is set to 3600 seconds or 1hours by default This Time allows the automatic generation of other exchange password within the valid time of the 101 Gigabit SSL VPN Security Router User s Manual VPN connection so as to guarantee security Preshared Key For the Auto IKE option enter a password of any digit or characters in the text of Pre shared Key the example here is set as test and the system will automatically translate what users entered as exchange password and authentication mechanism during the VPN tunnel connection This exchange password can be made up of up to 30 characters Advanced Setting for IKE Protocol Only Advanced Aggressive Mode Keep Alive C NAT Traversal Dead Peer Detection DPD Interval 10 seconds Ol HeartBeat Remote Host o o o lo Interval seconds Retry count The advanced settings include Main Mode and Aggressive mode For the Main mode the default setting is set to VPN operation mode The connection is the same to most of the VPN devices Aggressive Mode This mode is mostly adopted by remote devices The IP connection is designed to enhance the security control if dynamic IP is used for connection Keep Alive If this option is s
146. seneeees 145 12A TDMA OS st iO O od sas 145 12 12 POr Range OF Wal GING ts 146 MZ EIN areca rafters esc time attracts tse epb an sate A On eA ae araprsst oer E E A TE E ewe onsen Se esedchatcnes 148 MO OTIS ios 149 123 110 YN amic QUINA aaa aii 149 1202 aC ROUNO ar ca 150 12 AONE TO ONE NA Tossal iio 152 12 5 DDNS DYNAMIC DOMAIN NAME SERVICE cccscccesseeeseeeeneeeeseeeeseeeeseeeeaecesaeeseaeeeeaeeesaeeeeaeeceaeeeeaeeeeaeeenaeeesas 155 126 MAC CLONE nun noi oo 157 CHAPTER 13 SYSTEM TOOL dida aaa iia 158 131 DIAGNOSTICA 158 13 2 FIRMWARE UPGRADE ci dao 159 13 3 CONFIGURATION BACKUP cerco pileta a O eRaadd 159 ES A O team a gt eats seeing see magnesia ase ease etc sesamin 161 135509 VS TEN RECOVER da ni oia 162 TSO FAG VATA BIET td ant asec needa emcee T 162 CHAPTER 14 EO Giusti 167 IAS YS TEMO A ias 167 1AZSYSTEM STATIS TIO bostero EEA E E 171 o O A areca Badan teeta taeda 172 IRAIPARORT STATS Oo ti di 175 VI Gigabit SSL VPN Security Router User s Manual Chapter 1 Introduction As Internet becomes essential for your business the only way to prevent your Internet connection from failure is to have more than one connection PLANET s Gigabit SSL VPN Security Router SG 4800 reduces the risks of potential shutdown if one of the Internet connections fails Moreover it allows you to perform load balancing by distributing the traffic through three or four WAN connections In addition to a multi homing device PLANET
147. sent out from the internal PC to the Internet This log includes LAN IP destination IP and service port that is applied It is illustrated as below UDP 192 168 1 100 7464 77 239 233 64 20301 on ixp2 Feb 6 03 46 03 2006 Feb 6 03 46 06 2006 Connection Refused Policy violation e UDP 192 168 1 100 7464 gt 84 10 118 17 10682 on ixp7 mi Connection Refused Policy Feb 6 06 27 54 2006 violation TCP 192 168 1 1 80 192168 1 100 1224 on ixp Connection Refused Policy Feb6 08 18 58 2006 _Violation TOP 192 168 1 101 18195 gt 163 253 104 148 1234 on ixp1 Connection Refused Policy Feb 6 08 19 53 2006 violation TCP 192 166 1 101 516 71 3 139 58 12 1234 on ixp1 169 Incoming Packet Log View system packet log of those entering the firewall The log includes information about the external source Gigabit SSL VPN Security Router User s Manual IP addresses destination IP addresses and service ports It is illustrated as below Incoming Log Table Current Time Fri Mar 4 20 14 20 2011 Feb 6 02 34 31 2006 Feb 6 02 57 54 2006 Feb 6 03 06 39 2006 Feb 6 03 15 31 2006 Feb 6 03 45 58 2006 Feb 6 03 46 00 2006 Feb 6 03 46 02 2006 Connection Refused Policy violation Connection Refused Policy violation Connection Refused Policy violation Connection Refused Policy violation Connection Refused Policy violation Connection Refused Policy vi
148. sk Default bateway DNS Server Required DNS Server Optional internal LAN IP Range 1 intemal LAN IP Range 2 internal LAN IP Range 3 internal LAN IP Range 4 internal LAN IP Range 5 Shared Circuit WAN environment Yes MTU Auto Th i 1 CL O iT 4 El Gl MA MEME MINE EF PIPPI EEECa PPA ail Ane NO Filter broadcast packets from WAN Manual 1500 bytes O _ Enabled Line Dropped Scheduling Line Dropped Period fomo jo to 0 24 Hour Format Line Dropped Scheduling minutes ahead line dropped to start new session transferring Backup Interface WAN IP Address Input one of the static IP addresses issued by ISP Input the subnet mask of the static IP address issued by ISP such as Issued eight static IP addresses 255 255 255 248 Issued 16 static IP addresses 255 255 255 240 Default Gateway Address Input the default gateway of the static IP address issued by ISP For ADSL users it is usually an ATU R IP address 31 Gigabit SSL VPN Security Router User s Manual DNS Server Input the DNS IP address set by ISP At least one IP group should be input Pe or Internal LAN IP Range Input the available IP range issued by ISP If ISP issued two discontinuous IP address ranges users can input them into Internal LAN IP Range 1 and Internal LAN IP Range 2 respectively Enable Line Dropped The WAN disconnection schedule will be activat
149. spective holders Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications and makes no warranty and representation either implied or expressed with respect to the quality performance merchantability or fitness for a particular purpose PLANET has made every effort to ensure that this User s Manual is accurate PLANET disclaims liability for any inaccuracies or omissions that may have occurred Information in this User s Manual is subject to change without notice and does not represent a commitment on the part of PLANET PLANET assumes no responsibility for any inaccuracies that may be contained in this User s Manual PLANET makes no commitment to update or keep current the information in this User s Manual and reserves the right to make improvements to this User s Manual and or to the products described in this User s Manual at any time without notice If you find information in this manual that is incorrect misleading or incomplete we would appreciate your comments and suggestions Trademarks The PLANET logo is a trademark of PLANET Technology This documentation may refer to numerous hardware and software products by their trade names In most if not all cases these designations are claimed as trademarks or registered trademarks by their respective companies CE mark Warning This is a class A device in a domestic environment this product may cause radio interferen
150. sued by planet com tw Yalid from 7 10 2007 bo 792012 r r ore Security Alert Aih i tah E EE el ey a Farh e mn O Ste ee eran SE Ieee cade itt tet ret Sn reo Crate vid 5 a D 4 A pl Bats Ea Melee ea i n ya oa AGA Informatica change with this site cannot be viewed or AE i TEA Be my EA cl e E i aE i a Te Antep Re I Fl co ECHAN E pa cnag E oth TS Mol i eee ist ene eters ae ertificate totes Ba lf i E i dE A r TAa Bo a a Ae Ge AS e Ines i a a pr are areal at wie k a Tae fala ok y i an da Ad ne Ae E i ona ij e ti EER a ee ee a PP Sept cee LET Yez a a AEA Aval H i iem Certificate A Mata 185 race Segre fe tierce alle tea pa 3 she FEAL TATU Mey ee a e yr ay ray r o E PLEIE ETP AAA A nee E dra nc ad eli pa ATEA seat eae Please note that these warning messages won t influence the operation and usage of the SSL VPN But if you want to apply an integrity SSL certificate from a third party organization you need contact these third party organizations for example VeriSign and follow their procedures to apply a integrity SSL certificate for your business 140 Gigabit SSL VPN Security Router User s Manual Server Certificate Table Add Export Used Certificate for Client Export Used Certificate for Administrator SSL certificate import Generally SSL certificate format looks like the diagram below and it indicates a P
151. t Link Backup Interface Select another WAN port as link backup when port binding is configured Users should select the port that employs the same ISP Shared Circuit WAN If your WAN connects to a Switch select Enabled to filter broadcast packets environment The default is Disabled MTU is abbreviation of Maximum Transmission Unit Auto and Manual can be chosen The default value is 1500 Different value could be set in different network environment e g ADSL PPPoE MTU 1492 The default is Auto After the changes are completed click Apply to save the configuration or click Cancel to leave without making any changes Static IP If an ISP issues a static IP Such as one IP or eight IP addresses etc please select this connection mode and follow the steps below to input the IP numbers issued by an ISP into the relevant boxes 295 2 Gigabit SSL VPN Security Router User s Manual Interface MAN 1 WAN Connection Type Static IF w WAN IP Address 0 o jo Subnet Mask 255 255 255 Default Gateway o e e DNSServer Required 0 Jo fo DNSServer Optional a o jo Shared Circuit WAN environment Yes NO Filter prosdesst packets from WAN MTU 2 Auto Manual 1500 bytes _ Enabled Line Dropped Scheduling Line Dropped Period from 0 0 to o 24 Hour Format Line Dropped Scheduling minutes ahead line dropped to start new sess
152. t Delete Selected item Delete selected list Apply Click Apply button to saving configuration Click Cancel button to reject modification a Gigabit SSL VPN Security Router User s Manual 8 2 Session control Session management controls the acceptable maximum simultaneous sessions of Intranet PCs This function is very useful for managing connection quantity when P2P software such as BT Thunder or emule is used in the Intranet causing large numbers of sessions Setting up proper limitations on sessions can effectively control the sessions created by P2P software It will also have a limiting effect on bandwidth usage In addition if any Intranet PC is attacked by a virus like Worm Blaster and sends a huge number of session requests session control will restrict that as well Session Control and Scheduling Session Control Disabled Single IP cannot exceed Session Single IP cannot exceed TCP hoo UDP Session When single IP exceed Session block this IF s new sessions for 5 minutes block this IF s all sessions for 5 minutes Scheduling ee NN Apply this rule oo 00 to 22 58 24 Hour Format Everday Sun Man Tue Wed Thu Fri Sat Disabled Disable Session Control function Single IP cannot This option enables the restriction of maximum external sessions to each Intranet exceed _ session PC When the number of external sessions reaches the limit to allow new sessions to be built
153. t SSL VPN Security Router User s Manual Database Displays authentication server s self defined user names Displays which group the user belongs to from here you can modify user groups User passwords if Local Database expiration dates user classifications and inactive timeouts can be edited or modified but user authentication servers and user names cannot If you want to modify a user name first delete it and then add a new user name You can also select an authentication server to edit IP address and domain name Click on the Delete tab to delete selected users Add New User Click on Add New User and then the window below will pop up Please note In addition to the local database user names and passwords must correspond to the selected authentication server s user names http 1192 168 1 1 edit_sslvpn_user htm Windows Internet Expl 2 0 f E htp 1192 168 1 1edit_sslvpn_vser htm Domain Name UserName Ps Password fs Expiration Date Cy imm dd User Administrator User Inactivity Timeout minutes Default admin 60 Administrator ARAE 134 Gigabit SSL VPN Security Router User s Manual Domain Name Displays the authentication server name User Name Enter authentication server s user names Password For Local Database enter user passwords Passwords do not need to be entered if Local Database is not used Expiration Date Enter users permitted time
154. tatus after login as well as change password and system time settings for security 5 1 Home Page In the Home page all VPN Security Router parameters and status are listed for users reference 5 1 1 WAN Status WAN Status WAN 1 192 168 4195 192 168 4 1 192 168 5 121 192 168 5 120 0 0 0 0 0 Dyndns Disabled Dyndns Disabled Dyndns Disabled Dyndns Disabled 3322 Disabled 3322 Disabled 3322 Disabled 3322 Disabled O rules set O rules set O rules set O rules set SEN Enemy SEN EEN WAN IP Address Indicates the current IP configuration for WAN port Default Gateway Indicates current WAN gateway IP address from ISP DNS Indicates the current DNS IP configuration Downstream Bandwidth Indicates the current downstream bandwidth usage for each WAN Usage Upstream Bandwidth Indicates the current upstream bandwidth usage for each WAN Usage DDNS Setup Indicates if Dynamic Domain Name is activated The default configuration is ie Gigabit SSL VPN Security Router User s Manual IO EA Quality of Service Indicates how many QoS rules are set Manual Connect When Obtain an IP automatically is selected two buttons Release and Renew will appear If a WAN connection such as PPPoE or PPTP is selected Disconnect and Connect will appear DMZ IP Address Indicates the current DMZ IP address 14 Gigabit SSL VPN Security Router User s Manual 5 1 2 Physical Port Sta
155. the VPN connection Config Setting items include Edit and Delete icon Click on Edit to enter the setting items and users may change the settings Click on the trash bin icon and all the tunnel settings will be deleted __ Tunnel s Enabled This displays how many tunnels are enabled and how many tunnels are set __ Tunnel s Defined 93 Gigabit SSL VPN Security Router User s Manual 10 1 1 Add a New VPN Tunnel The device supports Gateway to Gateway tunnel or Client to Gateway tunnel The VPN tunnel connections are done by 2 VPN devices via the Internet When a new tunnel is added the setting page for Gateway to Gateway or Client to Gateway will be displayed Gateway to Gateway Click Add to enter the setting page of Gateway to Gateway Gateway to Gateway REMOTE VPN Device LOCAL Gateway to Gateway VPN Device Client to Gateway Click Add to enter the setting page of Client to Gateway Client to Gateway CLIENT _ Mobile Users LOCAL Client to Gateway VPN Device Add The following instructions will guide users to set a VPN tunnel between two devices 10 1 1 1 Gateway to Gateway Setting 94 Gigabit SSL VPN Security Router User s Manual Set the embedded VPN feature please select the Tunnel number Tunnel Name Displays the current VPN tunnel connection name such as XXX Office Users are well advised to give them different names to avoid confusion If this t
156. ting is selected the device will automatically allocate external connections based on routing policy Division of traffic between Telecom and Netcom is to be used in China embedded in the device All you have to do is to select the WAN or WAN group which is connected with Netcom the device will then automatically dispatch the traffic for Netcom through that WAN to connect with the Internet and dispatch traffic for Telecom to go through the WAN connected with Telecom to the Internet accordingly In this way the traffic 40 Gigabit SSL VPN Security Router User s Manual for Netcom and Telecom can be divided Set WAN Grouping If more than one WAN is connected with Netcom to apply a similar division of traffic policy to these WANs a combination for the WANs must be made Click Set WAN Grouping an interactive window as shown in the figure below will be displayed Name Interface Fl WAN E WAN2 E WAN3 E WANA Add to list Delete selected Name To define a name for the WAN grouping in the box such as Education etc The name is for recognizing different WAN groups Check the boxes for the WANs to be added into this combination Add To List To add a WAN group to the grouping list Delete selected Item To remove selected WANs from the WAN grouping Apply Click Apply to save the modification Close Click Cancel to cancel the modification This only works before Apply is
157. tions The network bandwidth is set by what users input for it For example if the upload bandwidth of both WANs is 512Kbit sec the automatic load ratio will be 1 1 if one of the upload bandwidths is 1024Kbit sec while the other is 512Kbit sec the automatic load ratio will be 2 1 Therefore to ensure that the device can balance the actual network load please input real upload and download bandwidths 48 Gigabit SSL VPN Security Router User s Manual The Maximum Bandwidth provided by ISP WAN 1 10000 10000 WAN 2 10000 10000 WAN 3 10000 10000 WAN 4 10000 10000 Protocol Binding Users can define specific IP addresses or specific application service ports to go through a user assigned WAN for external connections For any other unassigned IP addresses and services WAN load balancing will still be carried out In the load balance mode of Assigned Routing the first WAN WAN 1 cannot be assigned It is to be saved for the IP addresses and the application Service Ports that are not assigned to other WANs WAN2 WAN3 and WAN4 for external connections In other words the first WAN WAN1 cannot be configured with the Protocol Binding rule This is to avoid a condition where all WANs are assigned to specific Intranet IP or Service Ports and destination IP no more WAN ports will be available for other IP addresses and Service Ports Protocol Binding Show Priority Semice All Traffic TCP amp UDP 1 65535 m
158. tions fails and the traffic going through this WAN to the destination IP should go through the other WAN to reach the destination In this way when any of the WAN connections is broken other WANs can serve as a backup traffic can be shifted to a WAN that is still connected Default Gateway The local default communication gateway location such as the IP address of an ADSL router will be input automatically by the device Therefore users just need to check the option if this function is needed Attention Some gateways of an ADSL network will not affect packet detection If users have an optical fiber box or the IP issued by ISP is a public IP and the gateway is located at the port of the net caf rather than at the IP provider s port do not activate this option This is the detected location for the ISP port such as the DNS IP address of ISP When configuring an IP address for this function make sure this IP is capable of receiving feedback stably and speedily Please input the DNS IP of the ISP port Remote Host This is the detected location for the remote Network Segment This Remote Host IP should better be capable of receiving feedback stably and speedily Please input the DNS IP of the ISP port www hinet net is acceptable here Do not input an IP address In addition do not input the same web address in this box for two different WANs SA Gigabit SSL VPN Security Router User s Manual In the load balance mod
159. to Group one group only Display customized user name Please note The built in users of the authentication server database in Domain Management will not display on the user list User passwords if Local Database expiration dates user classifications and inactive timeouts can be edited or modified but user authentication servers and user names cannot If you want to modify a user name first delete it and then add a new modified user name Delete this user 125 Gigabit SSL VPN Security Router User s Manual Add New User Click on Add new user and the window below will pop up Please note In addition to Local Database user names and passwords must correspond to the selected authentication server s user names gt http 192 168 1 Lfedit sslypn_ user htm Windows Internet Expl i3 h E htp1592 169 1 1 Domain Name UserName PY Password fs Expiration Date ty mm sid User Administrator User Inactivity Timeout minutes Default admin 60 Administrator Domain Name Display the authentication server name used by this group Enter authentication server s user name Password For Local Database enter user passwords Passwords do not need to be entered if Local Database is not used Expiration Date Enter users permitted time limit For example if the expiration date is set to November yyyy mm dd 1 2007 then the user will be denied beginning on November 2 2007 at 12
160. to be assigned to this group Each group can only be assigned to one type of authentication server Default is Local Database If there are changes to the domain servers designated by All Users other groups that have yet to enable will also be modified accordingly Domain Names Display all authentication server names Authentication Display authentication server type Type Authentication Display external authentication server IP addresses If the Authentication Type is Local server IP Database the authentication server IP address will not be displayed User Database For external authentication servers the user database will be Apply User Database and Customize User Database Click Apply User database then there is no need to establish additional user data and the system will directly apply the external authentication server s internal user database settings As long as the users belong to this authentication server group they can use the group s resources Note If multiple groups designate the same authentication server for users only one group will be able to use the built in user database at one time For this reason it is recommended that the largest group be designated to use the built in user database and other smaller groups use the Customize User Database Select the Customize User Database the administrator must add a new user to the group See step two User management If users have not been set by the a
161. tual Passage 114 Gigabit SSL VPN Security Router User s Manual Click the recycle bin icon to delete a group Display whether the group configuration is Enabled or Disabled Defaults for the All Users group are Enabled and for others are Disabled Add Group Click the Add New Group tab entering the group admin section to add a new group 11 3 Group Management Group Management helps the web administrator organize users access to internal service resources in groups It can be configured by following 3 steps Domain Management User management and Service Resource management In addition SSL VPN s unique One Click makes your basic configurations fast 115 Gigabit SSL VPN Security Router User s Manual UserGroup AllUsers e Add Group Enabled This Group Authentication Domain Dl check user digital certificates Add New Domain Idle timeout for this group Idle timeout for this group Minutes User Management Add new User Resource Management Secure Web RDP5 VNC Telnet SSH Configure Bookmark for this Group Permit Customized Bookmark Configure Bookmark for this Group Permit Customized Bookmark AS PowerPoint am VI virtual Passage Allow the users to oro A aller et Explorer access the Beene de outer wil not J redirect their packet flow Users can ar J choose to redirect their packets through router or no Redirect all users packets
162. tus Physical Port Status ATA O S A A AA WANT O WAN2 WANS WANG DMZ Enabled Enabled Enabled Enabled Enabled The status of all system ports including each connected and enabled port will be shown on this Home page see above table Click the respective status button and a separate window will appeare to show detailed data including setting status summary and statisitcs of the selected port WAN 1 Information Summary 10Base T 100Base TX 1000Base T WW Port Enabled Normal 10 Mbps Half Enabled The current port setting status information will be shown in the Port Information Table Examples type 10Base T 100Base TX 1000Base T iniferface WAN LAN DMZ link status Up Down physical port status Port Enabled Port Disabled priority high or normal speed status 10Mbps or 100Mbps duplex status Half Full auto negotiation Enabled or Disabled The tabble also shows statistics of Receive Transmit Packets Receive Transmit Packets Byte Count as well as Error Packets Count 15 Gigabit SSL VPN Security Router User s Manual 5 1 3 System Information System Information 192168 1 1 255 255 255 0 PLT2BCP 3100112571 Beare vi 0 0 Ue D ec 2011 19 25 22 0 Days5 Hours38 Minutes11 seconds Sat Jan 12000 13 38 10 LAN IP Address Subnet Identifies the current device IP address and subnet mask The default is Mask 192 168 1 1 and 255 255 255 0 Working Mode Indicates the curr
163. uire and then the entire destination IP connected to remote devices as well as the number of ports will be displayed IP Port Statistic Enabled IP Port Statistic IP address 0 o o lo 192 168 1 100 TCP 2959 WANA 74 120 121 3 80 8 32 192 168 1 100 TCP 2940 WANA 192 168 5 126 1144 11 20 a 192 168 1 100 TCP 3036 WAN 192 168 5 27 445 1 1 192 168 1 100 TCP 2958 WAN 65 54 1689 156 1863 0 0 192 168 1 100 TCP 2942 WAPA 192 168 5 121 49156 0 0 192 168 1 100 TCP 3128 WAN 118 160 195 248 1894 0 0 192 168 1 100 TCP 2947 WAN 192 168 5 120 49157 0 0 Rae triers tl 175 Gigabit SSL VPN Security Router User s Manual Specific Port Status Enter the service port number in the field and IP that are currently used by this port will be displayed IP Port Statistic MJ Enabled IP Port Statistic Port Search 192 168 1100 TCP 2959 WANI 74 120 121 33 80 8 33 192 168 1 100 TCP 3576 WANI 203 69 113 18 80 0 0 176
164. unnel is to be connected to the other VPN device some device requires that the tunnel name is identical to the name of the host end to facilitate verification This tunnel can thus be successfully enabled From the pull down menu users can select the Interface for this VPN tunnel Enabled Click to activate the VPN tunnel This option is set to activate by default Afterwards users may select to activate this tunnel feature Local VPN Group Setting Local VPN Group Setting se hele e as 5 This Local Security Gateway Type must be identical with that of the remote type Remote Security Gateway Type Local Security This local gateway authentication type comes with five operation modes which are Gateway Type IP only IP Domain Name FQDN Authentication IP E mail Addr USER FQDN Authentication Dynamic IP Domain Name FQDN Authentication Dynamic IP E mail Addr USER FQDN Authentication Dynamic IP address Email address name 1 IP only If users decide to use IP only entering the IP address is the only way to gain access to this tunnel The WAN IP address will be automatically filled into this space Users don t need to do further settings an ppp 2 IP Domain Name FQDN Authentication If users select IP domain name type please enter the domain name and IP address The WAN IP address will be automatically filled into this space Users don t need to do 95 Local Sec
165. up settings to disable or modify settings in sequential order according to the following steps If you want to use the one click function after you have added new authentication servers complete the setup by assigning the All Users group authentication server to the newly created authentication server Note All of the users in this authentication server can link to the web portal and access all of the enterprise resources pre determined by administrators Administrators do not need to define settings for step 2 User management and step 3 Service resources management 124 Gigabit SSL VPN Security Router User s Manual UserGroup Virtual Passage Add Group Enabled This Group Authentication Domain l Default Local DataBase E Ll Check user digital certificates Add New Domain Step 2 User Management User Management determines who belong to this group and have the right to use the resources Newly added users will appear on the user list click on Assign to this Group column to designate a user to this group If Domain Management is set to Customize User Database and when the user list does not have a suitable user click Add New User to create a new one User Management test zat a Assign to this Select a user from the user list to assign to this group One user can be assigned
166. urce IP address 192 168 1 100 to 100 Retain the original numbers 0 0 0 0 in the boxes of Destination IP which means to include all Internet IP addresses Select WAN2 from the pull down option list Interface and then click Enable Finally click Add New and the rule will be added to the mode Protocol Binding sevice All Traffic TCP amp UDPN 65535 o Interface WAN Enabled Update this Application to B HEE EEE Ao All Traffic TCP amp UDPM 65535 gt 192 168 1 100 100 0 0 0 0 0 0 0 0JWAN 2 Delete selected tem Add 52 Gigabit SSL VPN Security Router User s Manual Example 2 How do set up Auto Load Balance Mode to keep Intranet IP 192 168 1 150 200 from going through WAN2 when the destination port is Port 80 As in the figure below select HTTP TCP 80 80 from the pull down option list Service and then in the boxes for Source IP input 192 168 1 150 to 200 Retain the original numbers 0 0 0 0 in the boxes of Destination IP which means to include all Internet IP addresses Select WAN2 from the pull down option list Interface and then click Enable Finally click Add New and the rule will be added to the mode Protocol Binding Semice HTTP TCP 80 80 we Service Management Enabled HTTP TCP 80 80 gt 192 168 1 150 200 0 0 0 0 0 0 0 0 WAN 2 Delete selected tem Add
167. urity Group Type Gigabit SSL VPN Security Router User s Manual further settings FQDN refers to the combination of host name and domain name and can be retrieved from the Internet e von server com This IP address and domain name must be identical to those of the VPN secure gateway setting type to establish successful connection IF Domain NamefFoODN Authentication m a p 3 IP E mail Addr USER FQDN Authentication If users select IP address and E mail enter the IP address and E mail address to gain access to this tunnel and the WAN IP address will be automatically filled into this space Users don t need to do further settings IP E mail User FQDN Authentication a a O o sd 4 Dynamic IP Domain Name FQDN Authentication lf users use dynamic IP address to connect to the device users may select this option to link to VPN If the remote VPN gateway requires connection to the device for VPN connection this device will start authentication and respond to this VPN tunnel connection if users select this option to link to VPN please enter the domain name Dynamic IP Domain NamefFODN Authentication ho 7 5 Dynamic IP E mail Addr USER FQDN Authentication If users use dynamic IP address to connect to t
168. urity Router User s Manual Through order to connect with external VPN device After modification push Apply button to save the network setting or push Cancel to keep the settings unchanged 112 Gigabit SSL VPN Security Router User s Manual Chapter 11 SSL VPN For SSL VPN client only need a web browser to access to Central servers Passing the ID and you get the portal to the company s internal resources such as Internet services Microsoft terminal services remote desktop services online neighborhood networks and secure tunnel functions Meanwhile different users or groups can access to different interfaces according to the web administrator s configurations which satisfies external and mobile users security requirements Below introduces SSL VPN related settings SSL Secure Sockets Layer is a protocol that ensures secure data transmission over the Internet via HTTPS encryption including server authentication user authentication and SSL data link integrity and security 11 1 Status Block Status shows current SSL VPN users online status Status Tunnels Used o Tunnel s Available 10 admin 192 166 1 100 Thu May 24 18 57 30 2012 Administrator 1 Reme Tunnel s Used Display the amount of previously set tunnels Tunnel s Display the amount of available tunnels Display the current SSL tunnel user name Available user o croup Dipiaythe name of curent SSL tame using Group i oy oue
169. users to set the local VPN connection access type The following Group Type offers a few items for local settings Please select and set appropriate parameters 105 Gigabit SSL VPN Security Router User s Manual 1 IP address This option allows the only IP address which is entered to build the VPN tunnel IF Address Reference When this VPN tunnel is connected computers with the IP address of 192 168 1 0 can establish connection Reference When this VPN tunnel is connected computers with the IP address of 192 168 1 0 can establish connection 2 Subnet This option allows local computers in this subnet to be connected to the VPN tunnel subnet 19 Reference When this VPN tunnel is connected only computers with the session of 192 168 1 0 and with subnet mask as 255 255 255 0 can connect with remote VPN 106 Gigabit SSL VPN Security Router User s Manual Remote VPN Group Setting Remote VPN Group Setting OOOO This remote gateway authentication type Remote Security Gateway Type must be identical to the remotely connected local security gateway authentication type Local Security Gateway Type Remote Security Gateway Type This local gateway authentication type comes with five operation modes which are IP only IP Domain Name FQDN Authentication IP E mail Addr USER FQDN Authentication Dynamic IP Domain Name FQDN Authentication Dynamic IP E mail Addr USE
170. uter web based UI window We will follow the process flow to complete the network setting in the following chapters Gigabit SSL VPN Security Router User s Manual Chapter 3 Hardware Installation In this chapter we are going to introduce hardware interface as well as physical installation 3 1 Installing the Device on a Standard 19 Rack We suggest to either place the device on a desk or install it in a rack with attached brackets Do not place other heavy objects together with the device on a rack Overloading may cause the rack to fail thus causing damage or danger Each device comes with a set of rack installation accessories including 2 L brackets and 8 screws Users can rack mount the device onto the chassis Refer to the figure below for the device installation onto a 19 rack In order for the device to run smoothly wherever users install it be sure not to obstruct the vent BS on each side of the device Keep at least 10cm space in front of both the vents for air Attention convection Gigabit SSL VPN Security Router User s Manual 3 2 VPN Router Network Connection The device has 4 WAN ports and a hardware DMZ port therefore users can connect the device to the Internet and configure a connection to a Public IP server at the same time Vendor Branch Offices Firewall Gateway Firewall Gateway PC Group TD ey wo as dia Firewall Firewall W
171. uting rule into the list Delete Selected Remove the selected routing rule from the list ltem Show Table Show current routing table Apply Click Apply to save the network configuration modification Cance Click Cancel to leave without making any changes 151 Gigabit SSL VPN Security Router User s Manual 12 4 One to One NAT As both the device and ATU R need only one actual IP if ISP issued more than one actual IP such as eight ADSL static IP addresses or more users can map the remaining real IP addresses to the intranet PC virtual IP addresses These PCs use private IP addresses in the Intranet but after having One to One NAT mapping these PCs will have their own public IP addresses For example if there are more than 2 web servers requiring public IP addresses administrators can map several public IP addresses directly to internal private IP addresses Example Users have five available IP addresses 210 11 1 1 5 one of which 210 11 1 1 has been configured as a real IP for WAN and is used in NAT Users can respectively configure the other four real IP addresses for Multi DMZ as follows 210 11 1 2 192 168 1 3 210 11 1 3 192 168 1 4 210 11 1 4 192 168 1 5 210 11 1 5 192 168 1 6 BS The device WAN IP address can not be contained in the One to One NAT IP configuration Attention 152 Gigabit SSL VPN Security Router User s Manual Enable One to One NAT One to One NAT Ad
172. vate it to avoid limited services for group users Delete If there is no need to support terminal services click on the delete icon to delete the resource Status Displays server resource status as Enabled or Disabled Add New Terminal Server If an enterprise has multiple internal terminal servers click on the Add New Terminal Service tab to add a new terminal service Add New Terminal Service Application Description Host Address Optional sss Application Icon Enabled Application Import an application name Description Application and Set installation path this of application server Path Working Set application working directory Directory Host Address Set server address Application Icon Select the server icon In addition to built in icons there are also commonly used Icons Check to activate this service 137 Gigabit SSL VPN Security Router User s Manual 11 7 Link to Portal lf user management settings have the user type set to Administrator the user will login on the router management Ul For login to the web portal click Link to Portal Logout Home Network QoS IP DHCP Group Management Firewall Advanced Function Sys Tool Port Management VPN SSLVPN Log as du Service Service gt gt _ ___ _ _ 55 3 E Terminal Application Intranet Service S_n _ k ts 4 a A
173. zz i TER My Desktop Eo A 3 C Web Secure Web Telnet SSH FTP e My Network Place Book Mark y Virtual Passage Description Name IP Address Service FTP 192 168 5 163 HTTP edit i Ada Bookmark 11 8 Certificate Management In short SSL Certificate is an authentication between web browser and host A comprehensive certificate includes corporation name web site name users account digital key and validity date of certificate Web browser will request the web site to show digital certificate when the web browser requests to use SSL mode https If web browser decides to accept the digital certificate all data between the web site and browser will use certificate digital key encryption to avoid hacker to access the data SSL certificate includes public key and private key Public key is used to encrypt data while the private key is used to decrypt When the web browser connects to SSL network http SSL protocol will verifies server and client identities and creates a encryption method with public key Then the SSL will start a security process to protect the privacy and data integrity Generally if users do not import a legal authentication authorization SSL certificate verified through third party web page will display as below figure to warm that users have not getting SSL certificate by legal authorized third party agent 138 Gigabit SSL VPN Security Router User s Manual There is a problem with this w

User`s manual MH-3400 - PLANET Technology Corporation.

Contents

Download Pdf Manuals

Related Search

Related Contents