LED Headlight User`s Manual
Contents
1. DO NOT PULL ON THE CABLE DURING CLEANING CaviWipes is a registered Trademark of Metrex Research 960940 1_RevA_BrasseleDisc indd 9 12 15 11 3 00 PM OPERATING INSTRUCTIONS Brasseler VE Portable LED Light System 10 returns and exChanges Brasseler USA guarantees our products their performance and customer satisfaction If the light is not satisfactory to the end user it can be returned for any reason within 30 days of date of purchase Items returned showing signs of use abuse or neglect will not be credited light system Warranty Brasseler USA will provide a 1 year limited warranty against manufacturing defect on the battery pack and a 4 year limited warranty on the headlight and cable NOTE The battery pack will need to be replaced periodically as it reaches its maximum number of charging cycles and is not covered under warranty For returns or exchanges please contact Brasseler USA s Customer Support Department at 800 841 4522 for a Return Materials Authorization RMA and return label When product is returned the Brasseler USA assigned RMA must accompany the product Brasseler USA is not responsible for any returned product without as assigned RMA ContaCt For replacement parts or to reorder battery supplies contact your local Brasseler USA representative or call toll free 800 841 4522 960940 1_RevA_BrasseleDisc indd 10 12 15 11 3 00 PM 960940 1_RevA_BrasseleDisc indd 112. 12 15 11 3 00 PM 1 800 841 4522 www BrasselerUSA com One Brasseler Boulevard Savannah GA 31419 Distributed by 2012 Brasseler USA All rights reserved 960940 1 Rev A 12 11 Printed in the USA 960940 1_RevA_BrasseleDisc indd 12 12 15 11 3 00 PM
3. can now be flipped down in a position in front of the headlight 960940 1_RevA_BrasseleDisc indd 6 12 15 11 3 00 PM OPERATING INSTRUCTIONS Brasseler VE Portable LED Light System 7 Weight of the reflector lamp Approximately 0 7 ounces 20 grams Weight of control unit Approximately 8 5 ounces 240 grams Diameter of the reflector lamp Approximately 1 0 inch 26 mm Dimensions of battery pack Height approximately 3 8 inches 97 mm Width approximately 2 5 inches 64 mm Depth approximately 1 0 inch 26 mm Equipment class Ingress of water ordinary equipment IXP Battery type Li Ion battery 7 4 V 2 400 mAh Battery charge time 3 hours Battery life Low approximately 17 hours Medium approximately 10 hours High approximately 7 hours Light intensity Measured at a distance of 12 inches Low 3 000 foot candles Medium 5 000 foot candles High 7 000 foot candles Operation mode Continuous EMC IEC60601 1 2 Class B EN55011 Safety IEC 60601 1 Protection from shock Internally powered Temperature for operation and storage 32 to 95 F 0 to 35 C II Type BF teChniCal data 960940 1_RevA_BrasseleDisc indd 7 12 15 11 3 00 PM OPERATING INSTRUCTIONS Brasseler VE Portable LED Light System 8 safety preCautions Warnings teChniCal data continued 1 Only Brasseler supplied power supplies are to be used
4. trash Equipment class 1 Electric shock class Alternating current Direct current Symbols Key II Type BF 960940 1_RevA_BrasseleDisc indd 8 12 15 11 3 00 PM OPERATING INSTRUCTIONS Brasseler VE Portable LED Light System 9 5 Never try to use non Brasseler supplied charger units or control units 6 The charger must never be used outside 7 Do not use the control or charger units if the housing or plugs are damaged 8 If you determine that the charger or control unit is hot emits an odor or changes color or shape turn it off immediately and disconnect from the power network The device may not be used again and must be immediately returned to Brasseler 9 Do not store within reach of children disposal instruCtions The Waste Electrical and Electronic Equipment WEEE Directive forbids the disposal of waste electrical and electronic equipment as unsorted municipal waste and requires that they should be collected and recycled or disposed of separately Hazardous substances are present in electrical and electronic equipment and present potential risks to human health and the environment if disposed of in municipal landfills that are not designed to prevent migration of substances into the soil and groundwater By properly disposing of this waste you will be contributing to the advancement of reuse recycling and other forms of recovery as well as the pre
5. LED Headlight User s Manual 960940 1_RevA_BrasseleDisc indd 1 12 15 11 3 00 PM 960940 1_RevA_BrasseleDisc indd 2 12 15 11 3 00 PM OPERATING INSTRUCTIONS Table of Contents Components 4 Controls and Connectors 5 Charge the Battery 6 Operate the Brasseler VE Lighting System 6 Technical Data 7 Safety Precautions Warnings 8 Disposal Instructions 9 Clean the Headlight 9 Returns Exchanges and Warranty 10 Congratulations on your purchase of the Brasseler
6. VE portable light emitting diode LED lighting system The high capacity illumination unit which represents the most modern LED technology was developed especially for use in dental practices Please read these instructions carefully before using the unit Follow the procedures described in order to optimize the lifespan and functionality of the components of the illumination system Brasseler VE Portable LED Light System 960940 1_RevA_BrasseleDisc indd 3 12 15 11 3 00 PM 4 OPERATING INSTRUCTIONS Brasseler VE Portable LED Light System Components 1 Battery Pack Check to see that the following components are included in the packaging This unit contains an integrated Lithium Ion battery 2 LED Light Cable The four components of the LED light cable are as follows Headlamp 1 Mounting Clip 2 Gown Clip 3 Plug 4 3 Power Supply Battery Charger When plugged into the electrical outlet and the battery pack the light 5 located on top of the power supply will indicate the charging state of the battery 5 2 1 3 4 960940 1_RevA_BrasseleDisc indd 4 12 15 11 3 00 PM 5 OPERATING INSTRUCTIONS Brasseler VE Portable LED Light System Controls and ConneCtors 1 On Off Control Button 1 Turns the LED on and off 3 LED Cable Socket The LED cable plug 4 fits into the battery pack in this socket 3 4 Curing Filter The curing f
7. fully charged the light will be green and the charger will switch to a maintenance mode Charge the Battery 1 operating the Brasseler Ve lighting system 1 Mount the headlight to the center of your Brasseler VE loupes headband or competitive loupes by using the clip at the base of the headlight s articulating arm There are specific clips to interface with various loupe models Follow the instructions in the separate Loupe Clip Connection Kit included with your light system to determine the most appropriate clip for your specific loupe 2 Secure the cable to the temple using the supplied temple clips 4 Put the loupe light on and adjust it to a comfortable working position 5 Secure the cable with the gown clip so that the cable does not hinder the view or the work of the user 6 Connect the cable to the battery pack as previously described 7 Press the On control button on the unit to turn on the light 8 When using the light or when storing the unit never bend the cable tightly to avoid damaging the cable 9 Install the curing filter if needed a Slide the filter s frame over the outer rib of the headlight so that the hinged frame can flip down in front of the headlight as shown in the figure to the right b Use the included screwdriver to tighten the screw and secure the filter to the headlight c The filter
8. ilter is intended to be used when working with light cured polymers When working with these materials unfiltered light from the headlight could cause premature curing of the polymer The figure to the right shows the filter installed over a headlight 2 Light Intensity Control Button 2 Adjusts light output between three intensity settings LOW 3 000 foot candles MEDIUM 5 000 foot candles and HIGH 7 000 foot candles 1 4 3 2 4 Battery Charger Connection Port 5 The battery charger connects to this port The plug is a concentric design that fits in any orientation 5 Battery Capacity Monitor 6 Light will turn on and a short beep will sound when battery life is down to ten minutes The beep will reoccur every minute until the battery enters a shut down mode During shut down mode the light will blink indicating that the battery has depleted its capacity 5 6 960940 1_RevA_BrasseleDisc indd 5 12 15 11 3 00 PM OPERATING INSTRUCTIONS Brasseler VE Portable LED Light System 6 The battery is not completely charged on delivery The battery must be charged for at least 3 hours before its first use Beyond the initial charge no battery conditioning is required 1 Plug the charger into the battery pack 2 Plug the charger into the electrical outlet 3 While charging the light 1 on the charging unit will show red When the battery is
9. to power the LED battery 2 In order to avoid the risk of permanent eye damage do not look directly into the headlight or aim the headlight directly into someone s eyes Consider providing patients with protective eyewear 3 The control unit and the battery must be used exclusively for the purpose described 4 Under no circumstances should you open the housing of the charger or the control unit Never take the devices apart or undertake modifications Misuse of the battery can cause the battery to become hot explode or ignite and may cause serious injury Make sure that the following safety precautions are expressly followed Never open the battery charger or control unit Never make any changes modifications to the battery charger or control unit Do not bring the battery charger or control unit into contact with fire or severe heat over 158 F or 70 C Do not use outside Do not short circuit do not connect via a conductor or reverse polarity Protect from fluids and damp environments Do not use a damaged device Maintain storage and operational temperature of 32 F to 95 F 0 to 35 C Relative Humidity 10 to 85 non condensing Atmospheric Pressure 0 5atm to 1 0atm 500 hPa to 1060 hPa The Waste Electrical and Electronic Equipment WEEE Directive symbol Do not dispose of this product as normal
10. vention of pollution at a very local level Contact your local recycling center for location of appropriate recycling facility for electronic equipment Clean the headlight The headlight is manufactured using only high quality components This is an optical precision instrument that must be cleaned and handled with the greatest care Basic contaminations may only be removed with a soft clean dry cloth in order to avoid scratching the lenses Do not immerse the headlight in water sterilization fluid or ultrasound cleaning solutions The product is not waterproof Only use disinfection cloths for severe contamination Disinfection spray must not be used under any circumstances to avoid severely damaging the light Only clean the headlight with a sanitizing cloth such as CaviWipes Do not use gasoline cleaning solutions or aggressive solvents for cleaning Make absolutely sure that your sanitation cloth is suitable for alcohol sensitive surfaces and for medical facilities such as a dentist s chair contains no type of 1 propanol Aldehyde phenol or a quaternary ammonium bond has a broad spectrum effect against bacteria fungi and viruses Disinfection is not to be done with an autoclave or the following chemicals glutaraldeyde or agents containing iodide To avoid damaging the headlight do not use cleaning methods other than those prescribed
Download Pdf Manuals
Related Search