Instruction manual
Contents
1. BPV series speakers are weatherproof IP54 rated Avoid immersion or direct water jets to the speaker Avoid excess heat and exposure to direct sunlight Take care not to overload speakers HF drivers are especially prone to damage through overload For 100V installation take proper care to insulate any contacts within reach of users Seal any outdoor speaker connections from moisture ingress BPV series User Manual O adastra O adastra SPL vs Frequency BP4V SPL vs Frequency auSPL m Hz s 100 m0 e 1 2K x w m BP6V SPL vs Frequency dSPL m Hz so 100 me E 1 mm x w m K BP3V Impedance vs Frequency BP4V Impedance vs Frequency a M 20 He s wo an n a m sh tam na BP5V Impedance vs Frequency BP6V Impedance vs Frequency Ohm dez 3 2 Me wo m Kaai La aK 10 am Errors and omissions excepted Copyright 2012 AVSL Group Ltd BPV series User Manual2. O adastra BPV SERIES 100V Outdoor Speakers User Manual ee AAA eit Pr A qa ar cote AA a A r No yA TET i W A truta dy i i ki K g atere 952 810 aad pain eae 952 811 952 812 EAN maca es 952 813 952 814 BP5V 130mm 5 25 90Wmax 952 815 952 816 BER A 952 817 Introduction Thank you for choosing the BPV series outdoor speakers These weatherproof speakers have been designed to offer high quality sound for 100V line or low impedance installations Please read and follow the instructions in this manual to achieve the best results and avoid damage through misuse Installation The BPV series speakers are each supplied with a wall mounting bracket which allows 90 lateral adjustment When fixing to a wall or ceiling use the bracket to mark out the fixing points and use appropriate fixings for the substrate that the speaker will be attached to ensuring that the fixing is strong enough to bear the weight load Once the bracket is fitted support the speaker in position and attach top and bottom using the supplied M6 screw caps and adjust to the required angle Further M6 mounting points are available at the rear of the speaker should it be preferred to use different mounting methods e g 129 130 129 124UK www avsl adastra com an n group brand O adastra Connection BPV series speakers are connected via a hard wired cable from the rear of the enclosure For 100V operation use double
3. insulated cable rated to A ie 10w the total maximum current calculated as total max tapped power divided p a by 100V With the amplifier switched off strip the speaker wire ends and CN ow connect 100V or to the white wire and connect Common or to the A O orr black wire Insulate any connecting joints adequately and seal from O 80 moisture if connected outdoors Each model has a 100V transformer with various volume settings or tappings available via a rotary switch at the rear BP6V example shown White wire 100V or When used with a 100V line amplifier select the required maximum wattage that the speaker should demand from the amplifier Ensure that N the sum of the wattages of all the speakers attached to the amplifier does not exceed the recommended output of the amplifier Black wire COM or When used with a standard non 100V amplifier select the 8Q setting and refer to the amplifier manufacturer s manual to ensure that total speaker impedance Q is not less than recommended for the amplifier It is imperative that the amplifier does not deliver more power than can be handled by the BCV speaker Refer to the amplifier manual and specifications below to calculate this Normally it is recommended that the amplifier is capable of the RMS power rating of the speaker but cannot ever exceed the Max power rating Specifications Model BP3V PAVE PSV CBP Caution
Download Pdf Manuals
Related Search