IGS RB500 user manual
Contents
1. Check if the unit has been properly installed The EQ IN button doesn t lit when pressed Check if the unit has been properly installed Please check if the rack power supply is on check the LEDs at the front plate of the rack The sound coming out of the unit is very distorted Check the input signal level if too high the unit might saturate the sound especially when LF boost is high Warranty This device is declared to be free from defects in material and workmanship for a period of three years Any device found defective within three years from the delivery date and returned to the factory will be repaired adjusted or replaced and sent to the customer with no charge The customer always pays the shipping cost to us This warranty does not cover expendable items such as tubes or fuses If the defect has been caused by a misuse or abnormal operation conditions the repair will be billed at a nominal cost The product should be returned in its original package if this is possible or packed in such a way that it is not damaged during the shipment We are not to be held responsible for any damages during the shipment All units shall always be packed in a box with support for the rack ears All 500 series modules need to be secured in ESD bag and protected with foam We will charge the customer 20 VAT if the packing material needs to be replaced If we find that the product works perfectly the customer will be invoi2. make sure that the unit is safely placed When removing the unit from the rack unscrew the front panel from the rack and use your fingers to pull it out gently Do not use any sharp objects i e knives or screwdrivers to prize it IGS AUDIO RUBBER BANDS 500 mono passive equalizer Rubber Bands 500 is a passive equalizer absurdly reduced in size his tiny module is equipped with transformer balancing on inputs and outputs Carnhill as well as a discrete driver circuit Of course the entire filtering section is passive and mirrors analogue equalizers from the 60s High Cut 6 10 20 kHz High Boost 5 6 10 12 16 kHz Bass Boost Cut 20 40 60 100 180 240 Hz Boost Cut Range 15dB Q 0 5 to 4 Typical usage Great all around equalizer Block diagram PASSIVE FILTERS DORA BYPASS BALANCED BALANCED INPUT 3 OUTPUT RB 500 BLOCK DIAGRAM HIGH CUT HIGH BOOST Q FACTOR BASS CUT BASS BOOST HIGH CUT HIGH BOOST BASS CUT BASS BOOST Q FACTOR HIGH CUT FREQ HIGH BOOST FREQ BASS EQ FREQ EQ IN HIGH CUT FREQ HIGH BOOST FREQ EQ IN BASS FREQ 0 RUBBER PASSIVE EQUALIZER 8 Lo Amount of attenuation of high frequencies Amount of boost of high frequencies Amount of attenuation of low frequencies Amount of boost of low frequencies Slope of the high boost filter Frequency of high cut filter Frequency of high boost filter Frequency of bas
3. RUBBER ND PASSIVE EQUALIZER O LO RUBBER BANDS 500 USER S MANUAL IGS Audio Igor Sobczyk 3 Maja 76d 41 400 Mys owice Poland e mail igs o2 pl ph 48 601 597 592 www igsaudio com Please read all of the following instructions and save them or later reference before attempting to connect this unit to the Power DC Supply COVERS DO NOT remove the covers or try to repair the module on your own Refer servicing to qualified personnel only MOISTURE DO NOT expose the unit to rain or moisture If the unit should become so exposed TURN OFF the device immediately HEAT ALWAYS site the unit away from sources of heat including direct sunlight and ensure adequate ventilation around the unit dk stiri AVIS A RISK OF ELECTRICAL SHOCK DO NOT OPEN RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE TOP OR BOTTOM COVER REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Copyright 2014 All rights reserved The information in this document is subject to change without notice IGS Audio makes no warranty of any kind with respect to the material in this document and shall not be liable for errors contained herein or for incidental or consequential damages related to the use of the material Manual revision 1 0 may 2014 124 IGS Thank you for buying this IGS Aud
4. ced 50 VAT to cover our costs of examination and handling plus the cost for returning the product to the customer www igsaudio com
5. io product Please read the information provided below very carefully before using your IGS unit Unpacking Your RUBBER BANDS 500 has been carefully and meticulously tested and inspected before dispatch Please check for any signs of transit damage If any signs of mishandling are found please notify the carrier and your dealer immediately Your RUBBER BANDS 500 packing should contain an RUBBER BANDS 500 with IGS Audio tag packed in ESD bag and this manual with the Warranty and RoHS CE WEEE Declaration attached Compatibility and Power The RUBBER BANDS 500 module is designed to be installed into an API 500 Series compatible rack and cannot function stand alone requiring the power source supplied by the rack system The current consumption of the RUBBER BANDS 500 is rated at 55 miliamperes Please check with the rack manufacturer that the design can meet this rating Mounting WARNING Never plug or unplug any 500 series module with the power supply switched on You may destroy your unit permanently The dimensions of all IGS Audio 500 series modules are compatible with API standard When plugging your new unit to the 500 series rack no unnecessary force is needed However please be careful and do not rush while pushing the unit into the rack sockets to avoid damaging of the connectors and or the PCBs of either the unit or the rack After the unit is placed in the rack use the screws provided with your 500 series rack unit to
6. s eq section It s applicable for both boost and cut sections Eq On Off switch N NF SmE USE e 1 Ti Ww tak p H 3 Ww 5 To Lim 0 T rr a z 4 MY lm NO NF NY A HEF SM S NY J 3 gt N IN N LY 7 If Z al 1 ji fil wi RB500 high curve dl AI SPL nm mr mw r lui M in LN 5 Ln Lr LN Gry 1 I 600 800 dk 300 400 RB500 main functions and technical specification o00 series mono module All stepped manipulators Precise LED bar scale Carnhill input and output transformer 3 year warranty lt lt lt lt lt Operating Level 4dBu Maximum Input 20 dBu Maximum Output 22 dBu Input impedance 1 kOhm Output Impedance 600 Ohm Frequency response 5Hz to 20kHz 0 1dB Band amplification 15 dB Noise level dBA 99dB THD N OdBu 0 012 Power consumption 3 Watts Shipping weight 0 9kg Dimensions H 13 3cm x W 3 8 cm x D 15 8cm Troubleshooting The signal plays thru but there is no change in signal when i turn the knobs Please check the Bypass switch should be pushed in and lit No signal plays thru the unit regardless the settings at the front panel Please check the cables connecting the rack
Download Pdf Manuals
Related Search