Home

User Manual

Contents

1. 10 hex digits or 5 ASCII characters Passphrase l Key 1 Key 2 Key 3 Key 4 Img 3 12 Authentication Type Nothing needs to be changed here The default value is open system which is a hand shaking method for WEP encryption The setting is shown as following Img 3 13 Default Transmit Key 01020 30 4 i a3 r igi or 5 ASCII e Passphrase Key 1 Key 2 Key 3 Key 4 Img 3 13 The available key is from 1 4 and definition can be made to the 4 keys respectively All the four keys can be used to access the AP There are two types of Keys Hex and ASCII the key needs to be 0 9 for the Hex format and all the characters can be used for the ASCII format Default Transmit Key Default key and corresponds to the following Key 1 to Key 4 Encryption The way of encryption the default is 64bits input 10 bits Hex characters or 5 bit ASCII characters in the corresponding transmit key If 128bits format has been chosen then 26bits characters or 13 ASCII characters are required for the Keys Passphrase Use this to generate password by the system It is not recommended to be used in stead use your own memorable keys 3 1 1 3 Wireless Channel Setting Rules The following aspects should be paid attention to while setting the Wireless Channel 1 Wireless PCs are based on WiFi802 11g or 802 11b standards and 13 overlapping channels are provided in wireless PC network as shown in the following image C
2. 7 9 6 Repeat button pressing without affecting delay timer execution DEFINE DEVICE REL N 8 RELAY CRNET relay with the ID of 8 to 1 7 10 TP touch panel device with the ID of 10 define the define the DEFINE VARIABLE int py 1 define the CRNET variables relay s DEFINE EVENT BUTTON EVENT tp_ 1 1 PUSH turn on the CRNET relay s 1 way ON RELAY REL 1 wait for 5 seconds then turn off the first way of the CRNET relay repeat pressing donw the button during the waiting time will not affect the execution if py 1 py 0 WAIT 5000 OFF _RELAY REL 1 py 1 CREATOR CHINA 2011 03 WWW CREATOR1997 COM PGMIII Programmable Ethernet Control System RELEASE 7 9 7 Control the matrix switchers DEFINE_DEVICE to 1 10 TP mcom M 1000 COM DEFINE_VARIABLE string checkMode string outstr string instr DEFINE FUNCTION matrix output function void shuchu SEND _COM mcom 1 instr checkMode outs tr i DEFINE_START SET_COM mcom 1 9600 8 0 10 0 232 DEFINE_EVENT IIchoose the mode BUTTON_EVENT tp 4 PUSH checkMode B AVmode BUTTON EVENT tp 6 PUSH checkMode A Amode BUTTON EVENT tp 5 PUSH checkMode V Vmode choose the output BUTTON_EVENT tp 1 PUSH outstr 1 BUTTON_EVENT tp 2 PUSH outstr 2 BUTTON EVENT
3. CREATOR Professional Audio Visual Manufacturer PGMIII Programmable Ethernet Control System User Manual V1 2 CREATOR CORPORATION m Safety Instruction Symbols are used in the Manual and devices referring to the possible risk to users or others as well as the damage to property for helping you to safely and properly use the devices The instruction and the implications are as follows Please make sure your correct understanding of these instructions before using the Manual To remind user to conduct according to the attached operation and maintenance instructions If ignore these information death or injury could possibly happen To remind the user that the risky uninsulated voltage in the device could caused electric shock to human CE authentication indicates the product is in line with the EU safety regulation and for assurance of safety use SGS Authentication indicates the product has reached the QC standard of the global biggest Swiss universe surveyor This product has acquired the ISO9001 International Quality Authentication Authentication authority Germany Rheinland TUV Caution To avoid electric shock please don t CAUTION open the case nor put the useless parts in it A ELECTRO Soek Please contact with qualified service staff General Information Instruction List the situation of causing unsuccessful operation or setup and relevant information needed to notice Important Notices
4. DATA STR_M2MIPADDR data DATA Data String M2MDATA_EVENT 127 0 0 1 ONDATA TRACE dai ip ip DATA STR_M2MIPADDR data DATA DataString int p DATA B1 string ip DATA STR_M2MIPADDR I I M2MDATA_EVENT 127 0 0 11 ONDATA I I DEFINE CALL TEMPLATE abc tpx 3 5 com 4 CREATOR CHINA 2011 03 WWW CREATOR1997 COM PGMIII Programmable Ethernet Control System 7 9 3 Wall mounted keyboard DEFINE_DEVICE CRNET_RELAY N 6 RELAY define relay with the ID number of 6 CRNET WallBoard N 9 WM define the wall mounted programmable keyboard with the ID of 9 Programmable DEFINE EVENT II the wall mounted programmable keyboard s CRNET_ WallBoard first way return data is to control ON OFF of the CRNET_RELAY correspond to the DATA of the wall mounted Data 0 O means relay programmable control keyboard means being pressed down bouncing back DATA Data is the returned character array DATA_EVENT CRNET_WallBoard 1 ONDATA TRACE recive data from zhu gong MHIIDATA Data is character array from the com port Note currently returned doesn t support Ox8 display if DATA Data 0 1 ON_RELAY CRNET_RELAY 1 ON_VOL CRNET_VOL_01 ISET VOLTOTOL CRNET_VOL_01 56666 mi else if DATA Data 0 0 OFF_RELAY CRNET_RELAY 1 lisame as above the 2 way DATA EVENT CRNET WallBoard 2
5. power indicator when the 3 WIRELESS Wireless network signal indicator when there is wireless signal transmitting the indicator will on meaning it is sending or receiving data 4 ETHERNET Ethernet signal indicator when there is Ethernet signal transmitting the indicator will on meaning it is sending or receiving data 5 Antenna A pair of rotatable antenna has been provided for CREATOR CHINA 2011 03 WWW CREATOR1997 COM PGMIII Programmable Ethernet Control System being adjusted for best signal transmission 6 RESET This is the reset button There are two ways of reset the device to the default settings press and hold the RESET button for 10 seconds or use the web browser based configuration tools ss 14 ih The RESET button will eliminate all the settings back to the default settings which include all the security settings and IP The default value will be IP 192 168 1 245 login user name admin Password admin ETHERNET Ethernet interface for connection to network card network switch or routers The blue color means the connection is good while the orange color means the communication is going on DC 12V DC power supply interface the device is powered by DC 12V 3 1 1 CR WF10 Settings Step One Hardware installation Connect the CR WIFI10 s ETHERNET port to the PC s network card and connect the power supply to the CR WIFI 10 Then the device should be on automatically
6. programmed or the following error will appear a Project 9 Standard IR Libr 9 IR learning libri x Explanation Make sure the displayed information is correct i3 1 Specified JDK path C j2sdk1 4 2 Not exist Please Setti then click Next S ThinkControl Setup Installing ThinkControl Please wait 7 3 jdk1 4 Installation The jdk1 4 software is both available from the C Program Files ThinkControl Standard mdb disk in the package and the CREATOR The installation procedures are as following Click the jdk1 4 installer to launch the installation as shown in the following image CREATOR CHINA 2011 03 WWW CREATOR1997 COM ie Java 2 SDK SE v1 4 2 License License Agreement Please read the Following license agreement carefully Sun Microsystems Inc Binary Code License Agreement for the JAVA 2 SOFTWARE DEVELOPMENT KIT 125DK STANDARD EDITION VERSION 1 4 2 X SUN MICROSYSTEMS INC SUN 15 WILLING TO LICENSE THE SOFTWARE TENTIFIED BELOW TO YOUU ONTY TPON O 1 do not accept the terms in the license agreement InstallShield Choose I accept the terms in the license agreement then Click Next ie Java 2 SDK SE v1 4 2 Custom Setup Custom Setup Select the program features you want installed Select optional features to install From the list below You can change your choice of features after installation by using the Add Remove Programs utility in the
7. GET MONTH Function get the month value of the current system GET DATE Function get the day value of the current system GET HOUR_OF_DAY Function get the hour value of the current system GET MINUTE Function get the minute value of the current system GET SECOND Function get the second value of the current system GET DAY OF WEEK Function get which day is it today in a week of the current system INT_TO_DOUBLE CREATOR CHINA 2011 03 WWW CREATOR1997 COM PGMIII Programmable Ethernet Control System Function convert int to double type DOUBLE TO_INT Function convert double type to int type STRING_TO DOUBLE Function convert string type to double type DOUBLE _ TO _ STRING Function convert double type to string type 7 7 Programing In the following section we will take the example of controlling a DVD with the touch panel through IR 7 7 1 Build a new project Launch the Think Control 1 0 software Choose File New or click the icon Hon the tools menu to build a new project shown as the following dialog New Project Project Name test Path E protest y Bone Description OK Q Cancel C Type in the project name test and click browse to set the saving location Fill in other project information if necessary and click OK to finish As we all know all software are based on hardware The object of the CR PGMIII s program is hardwar
8. SENSOR IR Receiving Window CR PGMIII Programmable Ethernet Controller provided built in IR Learning Module and SENSOR can receiving the IR Signal to be CREATOR CHINA 2011 03 WWW CREATOR1997 COM PGMIII Programmable Ethernet Control System learned for controlling 6 REBOOT Reboot button Press this button to reboot the system when the controller is not functioning 7 DATA Data Signal Indicator The indicator will be ON if the data signal transmission is normal or it will be OFF 8 IROUT IR Signal Indicator Indicating 8 IR Modules status controller is sending the IR Control Signal to the when the equipment to be controlled the corresponding indicator will be ON 9 COM Interfaces 8 programmable two way serial communication DB9 male interfaces have been provided RS 232 422 485 protocols 10 ETHERNET Ethernet Interface Used to communicated with the Ethernet and the Wifi touch panels or to realize the Ethernet remote control USB USB2 0 Communication Interface Connected to the PC s USB interface to realize the program various such as downloading System Diagnosis and IR Learning operations etc 11 24V Safety 12 AC 100V 240V System Power Supply Power Supply for the controller self adaptive AC100V 240V 50 60H 13 IR OUT Extension IR Control Module Slot Extension IR Control Module can be inserted here to extend the total IR Control
9. 64 Reply from 192 168 1 245 bytes 32 time lt ims TTL 64 Ping statistics for 192 168 1 245 Packets Sent 2 Received 2 Lost z loss gt Approximate round trip times in milli seconds Minimum ms Maximum ms Average Ams C Documents and Settings Administrator Img 3 6 3 Log in the CR WIFI 10 based on Windows XP OS Open IE browser and type 192 168 1 245 into the address bar then press Enter as shown in the Img 3 7 A about blank Microsoft Internet Explorer Img 3 7 Use the username admin default and the password admin default to log in at the pop up window and press Enter as shown in the Img 3 8 Connect to 192 168 1 245 TR Ll 4 E The server 192 168 1 245at CR WF10 requires a username and password Warning This server is requesting that your username and password be sent in an insecure manner basic authentication without a secure connection E admin User name Password admin Remember my password Img 3 8 Step Three Wireless Settings The settings page of the CR WIFI 10 will open after procedures shown in Img 308 and the page is as shown in Img 3 9 which includes setting options as Setup Wireless AP Mode Security Monitor Administration and Status What need to be changed are only the Setup Wireless and the Administration Setup Basic Setup gt Wireless AP Mode Basic Setup Security Monitor gt
10. Click add to finish Then we add the touch panel T Touch panel device type device name tp_1 device parameter type IR The touch panel with the ID of 10 has been added as shown in the following image Device Event Device Type T Touch screen devices w Device Name tp 1 Device Item Type TP Touch screen devices w Device ID 10 0 65535 10Hex Device addr Click add to finish CREATOR CHINA 2011 03 WWW CREATOR1997 COM PGMII Programmable Ethernet Control System Then we can find two lines of codes have been added into the DEFINE_DEVICE editing area under the DEFINE_DE VICE DYD M M 1000 IR fede Tot te Added DEFINE _COHBINE 9 DEFINE_CONSTANT 12 DEF INE_ ARIABLE 15 DEF INE_FUNCTION 18 DEFINE_TIHER Device define syntax Device name carrier device type carrier device ID device type 7 7 3 Add event After adding the devices we need to consider what we need to the control system to do Click the add event icon on the tools bar 56 44 BA o 2 29 FPE Add event Event Type BUTTON_EVENT Button events Device lt Null gt Channel 0 65535 Options PUSH L HOLD REPEAT RELEASE 7 7 3 1 Button event Choose Event type BUTTON_EVENT Choose a device from the drop down menu e g tp_1 none can also be chosen Choose the target button s number in the chann
11. Modules 14 CR LINK CREATOR High speed Bus Interface for extending controlling functions CR NET CR NET Bus CREATOR Communication Interface Similar to RS485 of 4 core phoenix connector type can be used to connecting various CREATOR external network equipment such as the relay box lighting control module sound control module wireless Access Point and wired touch panels etc IR OUT IR Control Port Includes 8 ways independent programmable IR Control carrier waves to control various equipment such as the DVD VCR and MD etc It s of the 2 core phoenix connector type and needs to be used along with the IR Emitting Probes connect the IR Emitting Probe to the IR OUT port and the other end near to the equipment to be controlled the distance needs to be lt 15cm RELAY Control Port Provides 8 ways low current control function and can drive the load below AC 0 3A 125V and DC OUT Low current Relay 0 3A 110V DC 1A 30V It can control the ON and OFF of any equipment fulfilling the above mentioned conditions to realize controlling high current high voltage load with low current low voltage controller DIGITAL I O I O interface Provides 8 ways programmable l O controlling function 5V 10mA output or O 5V 10mA input input output 15 RELAY OUT Extension Low current Relay Module Slot Can extend the low current relay module number by inserting extension module CREATO
12. ONDATA TRACE receive data from zhu gong IDATA Data is the returned data from the COM interface displayed in character supported currently If DATA Data 0 1 array Note 0x8 is not ON_RELAY CRNET_RELAY 2 ON_VOL CRNET_VOL_01 ISET VOLTOTOL CRNET_VOL_01 56666 else if DATA Data 0 0 OFF_RELAY CRNET_RELAY 2 Isame as above 3 way DATA_EVENT CRNET_ WallBoard 3 ONDATA TRACE recive data from zhu gong IDATA Data is the returned data from the COM interface CREATOR CHINA 2011 03 WWW CREATOR1997 COM PGMIII Programmable Ethernet Control System displayed in character array Note 0x8 is not supported currently if DATA Data 0 1 ON _RELAY CRNET_RELAY 3 else if DATA Data 0 0 OFF_RELAY CRNET_RELAY 3 7 9 4 Lighting and Sound Control DEFINE DEVICE to 1 T 20 TP define the touch panel device with the ID of 20 CRNET VOL N 4 VOL define the sound control device with the CRNET ID of 4 CRNET light N 5 LITE define the lighting control device with the CRNET ID of 5 DEFINE_VARIABLE int cr_light Idefine the brightness variable of the CRNET lighting control device int cr_vol Idefine the volume variables of the CRNET sound control device DEFINE EVENT between the time interval of pressing down tp 1 buttons and bouncing up the codes within the REPEAT block will be executed repeatedly i e press
13. Step Two Set the right IP The default IP of the CR WF10 is 192 168 1 245 the default subnet mask is 295 255 255 0 and the default SSID is ciscosb all of which can be set to other value required 1 Wired Network settings example given in Windows XP OS Power on the PC with Windows XP installed and check whether the LAN port indicator is ON If not please check and make sure the PC is well connected to the router Firstly right click on the desktop and choose the Network Neighbor from the popup menu then choose and click Prosperities Illustrated as Img 3 1 Open Explore Search For Computers Map Network Drive Disconnect Network Drive Create Shortcut Delete Rename me Properties Borer c came ss Img 3 1 Right click the Local Connections on the opened window and click the Properties as shown in Img 3 2 LAN or High Speed Internet er ocal Area Connection Disable LL Status Repair AD PCN Bridge Connections Create Shortcut Rename Properties Img 3 2 Choose the Internet Protocols TCP IP at the popup dialog as shown in the Img 3 2 Then right click and choose Prosperities CREATOR CHINA 2011 03 WWW CREATOR1997 COM PGMII Programmable Ethernet Control System Local Area Connection Properties E N i z 2 a General Authentication Advanced Connect using HW VMware Accelerated AMD PCNet Ad This connection
14. There are mainly three kinds of events 4 Button event Syntax the parameter can be 0 1 or 2 When there are 2 parameters it means the even is effective to the defined device name and joint number When there is only 1 parameter the event is only effective the defined device name When the parameter is 0 the event is effective to all the devices There functions corresponding to four events Press Release Hold and the whole button procedure The even execution codes have to be put into the corresponding functions BUTTON EVENT device JionNumber PUSH The operation to be done when press down the button RELEASE The operation to be done when release the button HOLD lt TIME gt TRUE FALSE The operation to be done after the button has been press down and held for a certain or at a certain time interval REPEAT The repeatedly operation to be done when the button is pressed down 4 Bar Event syntax the parameter can be 0 1 2 When there are 2 parameters it means the event will only be effective to the defined device and the joint number When there is 1 parameter it means the even will be effective to the defined device When the parameter is 0 it means the event is effective to all devices LEVEL EVENT device Jion Number Operation to be done when the bar has changed Data event CREATOR CHINA 2011 03 W
15. Wireless Settings Basic Wireless Settings Basic Settings Wireless Network Mode Mixed v Wireless Channel 6 2 437 GHZ v SSID SSID Name SSID Broadcast SSID 1 discosb Enabled s SSID 2 SSID 3 SSID 4 Img 3 10 The wireless setup page is shown in Img 3 10 For setting up the wireless network the control system only the following items should be changed while other items should be kept as their default value 1 Basic Wireless Settings Basic Settings to setup the basic prosperities of the wireless network Wireless Network Mode the following options are available Disable to disable the wireless connections B Only B Mode the max speed of the wireless transmission is 11Mbps G Only G Mode the max speed of the wireless transmission is 54Mbps Mixed Self adaptive mode This option is recommended then the device can self adjust and choose the best suitable mode according to the network card connected Wireless Channel Choose the right channel here The default amount of the channels is 6 For the detailed settings please refer to Section 3 1 1 3 in this chapter SSID Name The log in name used for wireless local network identification Only the ID passed the identification can access the wireless network As shown in the image this device supports 4 SSID and the SSID name can be customized SSID Broadcast Enable should be set here for the other devices to detect the AP Click Sav
16. base and double click And it s done 3 Previous Next 25 28 33 O 34 7 7 7 Compile the project After writing the program and before we upload the program into the controller we need to compile the program Click the Compile button as shown below aa Hg BABA When compiling the detailed information will be shown in the Output window gt IR learning z Si Project Standard IR E protest test test cht Compiling Are packaged as executable files E protest test bin creator jar ARM executable files are packaged into Build successful 0 Errors y Error List E Out put If some error happens the software will jump to the Double click the error information will bring you to the corresponding Error Window AE LO Pause 17 DEFINE_TIHER As 18 gt 3 St 13 e 20 DEFINE_START 9 SRC ON 21 0 SRC OFF 22 23 DEFINE_E ENT 24 25 BUTTON_EVENT tp_1 1 26 e 27 PUSH 28 r 29 SEND_IRCODE xxxr 1 I 30 31 RELEASE 32 33 34 37 DEFINE_PROGRAHE a Pr 19 Standard I Y IR learning library lt x Explanation File ES 23 variable xxxr Undefined test cht 29 ready Connect 192 168 1 a Then a CR PGMIII has been finished 7 8 Upload the program to the CR PGMIII After successfully complied the program click the below shown icon to launch the DManger softare aa da BA
17. following dialog will pop up CREATOR CHINA 2011 03 WWW CREATOR1997 COM PGMII Programmable Ethernet Control System IR Learning Function b Recive IrData hex 709400000 100000014010000000000000 a 00000000000000000000000B40300802F 0300002807008021030000BA0300802E0 30000BE030080 1F030000BA0300802803 0000660 30080300 30000BA03008022030 000B403008099060000350 70080900600 IR Learning successsful Save to function b D Click OK to save and the software will ask whether you need to record for the next button IR Learning Function a Recive IrData hex Do you want to learn next function Next function b E Click OK to collect the IR Control code for the next button till all the needed IR codes have been learnt then press cancel to exit File IR Library View About SdiML DGA amp eO t dD chi o 7094000001000000 7094000001000000 7094000001000000 7094000001000000 7094000001000000 7094000001000000 Devise 7094000001000000 7094000001000000 7094000001000000 Factory Note During collecting the IR Control Code the device s remote needs to face right to the IR Learning Module on the controller and the distance should be 3 5 cm When pressing the device s remote buttons the time should not be too long rather you should perform as general operations to control the IR device with its remote Special at
18. s first channel to be pressed down status 7 6 2 19 DEV REG void DEV_REG String dev int channel Function Device registration mainly applied for the registration of the second generation wall mounted control keypad Parameters dev input device channel Device channel number Example wm_N N 14 WM define the wall mounted control keypad device with the CRNET device number of 14 DEV REG wm_N 1 register the first channel of the wm_N 7 6 2 20 DEV QUERY void DEV_QUERY String dev int channel Function Device inquire mainly applied for inquiring the second generation wall mounted control keypad Parameters dev input device channel Device channel number Example wm_N N 14 WM define the wall mounted control keypad device with the CRNET device number of 14 DEV QUERY wm_N 1 inquire the first channel of wm_N 7 6 2 21 Other functions Many other functions have been provided to realize various controlling requirements Hereby below are some brief introductions TRACE Function print the message msg START_TIMER Function start the time with the name of name at the time interface of time milliseconds This function is used together with CANCEL_TIMER XXX START_TIMER Function at the time of year mouth day hh minute second start the time with the name of name at the time interface of time milliseconds CANCEL TIMER Function Cancel t
19. the program After finishing all the above configuration steps we need start the programming stage We want the controller to send out IR control code for PLAY when we press down tp 1 s JOBMONBER 1 button and send out IR control code for PAUSE when we press down tp _1 s JOBMONBER 2 button function to send out the IR control Hereby we need to use the SEND IRCODE codes The program is as following BUTTON _EVENT tp_ 1 1 panel s JointNumber 1 tp 1 touch PUSH send out IR control code for PLAY from DVD_M SEND_IRCODE DVD_M 1 IRCODE lt UserIRDb DENON DVD RC 1102 120110225093436 Paly RELEASE BUTTON EVENT tp_ 1 2 panel s Jointnumber 2 tp_1 touch PUSH send out IR control code for PAUSE from DVD_M s IR channel 2 SEND_IRCODE DVD_M 2 IRCODE lt UserlRDb DENON DVD RC 1102 T20110225093436 Pause gt RELEASE CREATOR CHINA 2011 03 WWW CREATOR1997 COM PGMIII Programmable Ethernet Control System codes which caused the error 7 7 6 1 How to insert IR Control code You can choose the required IR Control code from the IR Control Codes database to insert into the program rather than typing in A Firstly move the cursor to the place to insert the IR Control code 24 DEFINE_EVENT 26 BUTTON_EVENT tp_1 1 28 PUSH 30 SEND_IRCODE DVD_M 1 32 NE 34 35 B Choose the required IR Control Code from the data
20. to turn on the 1 way of the CRNET _ BUTTON EVENT tp_ 1 52 REPEAT cr_light cr_light 100 if cr_light gt 65535 cr_light 65535 SEND_LITE CRNET_light 1 cr_light same as above brightness reduce BUTTON EVENT tp_ 1 53 REPEAT SEND_LITE CRNET_light 1 cr_light cr_light cr_light 100 if cr_light lt 0 cr_light 0 same as above brightness reduces BUTTON EVENT tp_ 1 50 REPEAT SET VOLTOTOL CRNET_VOL 1 cr_vol SET VOLTOTOL CRNET_ VOL 2 cr_vol cr_vol cr_vol 100 if cr_vol gt 65535 cr_vol 65535 CREATOR CHINA 2011 03 WWW CREATOR1997 COM PGMIII Programmable Ethernet Control System same as above the general volume reduces BUTTON EVENT tp_ 1 51 REPEAT SET VOLTOTOL CRNET_VOL 1 cr_vol SET VOLTOTOL CRNET_VOL 2 cr_vol cr_vol cr_vol 100 if cr_vol lt 0 cr_vol 0 7 9 5 Interlock of 2 ways relay DEFINE DEVICE RL_M M 1000 RELAY built in relay on the controller to 1 17 10 TP touch panel with the ID of 10 define the define the DEFINE EVENT BUTTON EVENT tp_ 1 1 PUSH ON_RELAY RL_M 1 turn on the first relay on the controller OFF_RELAY RL_M 2 fturn off the 2 relay on the controller RELEASE BUTTON EVENT tp_ 1 2 PUSH ON_RELAY RL_M 2 turn on the 2 relay on the controller OFF_RELAY RL_M 1 turn off the first relay on the controller RELEASE
21. use the HTTPS connection type Set Web HTTPS Access Wireless Web Access as Disabled Set SNMP as Disabled Keep other values as default and click Save Setting to save and finish the settings 3 1 2 System Connection Diagram CR PGMIII CREATOR CHINA 2011 03 WWW CREATOR1997 COM PGMIII Programmable Ethernet Control System 3 1 3 Cascading and Ethernet Connection Diagram _ LAN CR PGMIII 3 2 Wireless One way Receiver CR RFA The CR RFA wireless RF one way receiver provides the connection between the controllers and the one way programmable touch panels which works on 433MHz communication is of one way the ID CODE setting has to be the same as corresponding settings on the controllers or they will not be able to communicate Interfaces 1 POWER Power indicator will be ON when power supply has been connected 2 ID ID indicator When the connection is between the CR RFA and the controller the ID indicator on the receiver and the NET ID on the controller will be ON 3 SIGNAL Communication indicator When the CR RFA receives the wireless signal from the touch panel the indicator will be flashing 4 RS 232 Serial Port Reserved port for the CR RFAs_ extension functions 5 NET 4 bit network interface It is the communication interface between the CR RFA and the controller connecting to the CR NET interface
22. 0 TP com M 1003 COM mr M 1000 IR io M 1000 10 to7600 N 07100 TP acar L 12 ACAR DEFINE_COMBINE tpx mtp DEFINE_EVENT receive the data from the first COM interface and send it to the second COM interface DATA _EVENT com 1 ONDATA SEND_COM com 2 0x BYTES _TO_HEX DATA Data BUTTON EVENT tpx 12 PUSH SEND_ACAR acar 1 12 SEND_ACAR acar 1 12 CREATOR CHINA 2011 03 WWW CREATOR1997 COM PGMIII Programmable Ethernet Control System LEVEL _EVENT tp7600 1 SEND _M2M_LEVEL 192 168 1 10 2 LEVE L Value SEND_M2M_LEVEL 192 168 1 2 12 LEVE L Value send the touch panel s bar data 13 with the joint number of 12 to the controller with the IP of 192 168 1 2 I BUTTON_EVENT tp7600 1 PUSH SEND _M2M_DATA 192 168 1 2 11111 send character 11111 to the controller with the IP of 192 168 1 2 SEND _M2M_ JNPUSH 192 168 1 2 12 send the touch panel s joint number 12 to the controller with the IP of 192 168 1 2 SEND _M2M_ JNRELEASE 192 168 1 2 12 send release command of the touch panel s joint number 12 to the controller with the IP of 192 168 1 2 II send the data of the 2 way of the COM interface to the controller with the IP of 192 168 1 10 DATA_EVENT com 2 ONDATA SEND_M2M_DATA 192 168 1 10 BYTES _ TO_STRING DATA Data M2MDATA_EVENT ONDATA TRACE all ip
23. 1 03 WWW CREATOR1997 COM PGMIII Programmable Ethernet Control System Options ese Edit Environment Display ETE ont Style F Courier X Key word Characters and strings DEFINE_ Title Pre block Digital Operator Color C Change Color Notes Bold Font Size s 10 y Default D Cancel C Apply A Choose environment Options x Edit Environment File association File association will use this program to open all the File association extension of the cprj and cht file nz JDK Path jdk Version must be eg C Program Files ljdk1 4 0 JDK Path C j2sdk1 4 2 Browse B Cancel C Apply A Click to browse the right jdk1 4 installation path Note if jdk1 4 s has been installed to its default path nothing needs to be changed here 7 5 Uninstallation The software can be easily uninstalled from Start Control Add and Delete Program All files modules and shortcuts will be deleted after the u installation Panel 7 6 Codes organization and Controller Functions 7 6 1 Codes Organization 1 A program is consisted of the following modules Every module has its own special functions for example the DEFINE DEVICE is used to define a device Each equipment involved in the controlling program has to be defined here It is recommended not to change t
24. AN caution To ensure the device in reliable use and personal safety please abide by the following items when in installation use and maintenance Notice in installation Please DO NOT use the product in following places electrical the places with dust dust places with high oily smoke conductive corrosive gas inflammable gas the temperature due rain and wind exposures the places endangered by shock and vibration Electric shock fire and incorrect operation could also cause damage and deterioration to the product When conducting screw drilling and wiring process DO NOT let metal irons and wire lead drop into the controller and air vent which could possibly cause fire failure and accidental operation 9 After finishing the installation it is necessary to ensure there is no foreign matter including the packing material like contact paper on the ventilation surface otherwise it could cause poor heat dissipation while running as well as fire failure and accidental operation Avoid conducting wiring and plugging in out cable socket with electricity otherwise electric shock circuit damage could easily happen Installation and wiring should be firm and reliable Poor contact could cause malfunction With regard to the application situations with strong interference shielded cable should be used for the input and output of HF signal to improve the anti interference performance of the syst
25. Administration Host Name wap288054 gt Status Device Name Network Setup IP Settings Static IP Address v Local IP Address 192 168 1 1245 Subnet Mask 255 255 255 0 Default Gateway 0 10 10 10 Primary DNS 0 10 0 10 Secondary DNS 0 0 10 0 Img 3 9 3 1 1 1 Setup Basic settings and network settings can be down under this option The interface is as shown in Img 3 4 Basic Setup Basic Setting to perform settings of Host name and Device Name The Host Name can be used to access the network and build up the DNS through the network Host name Set the controller s name A proper name is suggested for easier manage Device Name Set the device s name it can be any name Network Setup Network settings IP can be changed under this option IP Settings Set up the law for IP assignment static or dynamic The default way is static IP and the same default value should be kept for the controller s settings The CR WIFI 10 s IP can be changed by the following procedures Local IP Address fill in your IP address CREATOR CHINA 2011 03 WWW CREATOR1997 COM PGMIII Programmable Ethernet Control System e g 192 168 2 1 Subnet Mask fillin the Subnet Mask such as 255 255 255 0 Except the above mentioned settings all the other value can be set as 0 which include Default Gateway Primary DNS and the Secondary DNS Click Save Setting to save and finish the settings 3 1 1 2
26. BA o a 9 AFFE gt Upload the program 1 Click the button as shown below PIE SMA Connect the CR PGMIII s IP 2 Set up the controller s IP Controller IP by default it is 192 168 1 20 Port fixed as 7 55 Click Apply to finish CREATOR CHINA 2011 03 WWW CREATOR1997 COM Connect Hosts IP Host IP 492 168 1 Port 7755 a Ca Please be noted that the controller s IP cannot conflict with the PC s IP 3 Choose Network Control Upload to 0 yl 44 controller or click the icon and choose the program in the pop up dialog as shown below kal down to main host x Lookin jj new Pp amp t Name Date modif Type Size a bin Recent Places A syouvagesesusesuessuseuuesssssscusussussssussussusssususssusssussuusuusesscsuussusseusssucuusususesessuesusessussuss creator zch Desktop jack fi A Computer A lt Network File name creator zch v it Files of type creator zch y Cancel 4 Click open to upload the program to the controller If the operation is successful a window will appear as below Successful file transfer Update host Successful PH Danger 1 0 File Edit View NET Control USB Control Help ERIC Host address 192 168 1 20 Port 7755 File path E protest khfkh bin creator zch Successful file transfer Update host Successful 2011 09 16 19 59 31 If it is unsuccessful repeat th
27. CODE lt StanderlRDb 3M CODEC VCS3000 POLYCOM1 6289 6 MNO gt 7 6 2 2 ON_RELAY void ON_RELAY String dev int channel Function turn on the relay module Parameters dev relay device channel device s channel number Sample RELAY M M 1000 RELAY define the relay with the motherboard number of 1000 ON _RELAY RELAY M 2 turn on the relay with the motherboard number of 1000 7 6 2 3 OFF_RELAY void OFF_RELAY String dev int channel Function turn off the relay Parameters dev relay device channel device channel number Sample RELAY M M 1000 RELAY define the relay with the motherboard number of 1000 OFF _RELAY RELAY_M 2 turn off the relay with the motherboard number of 1000 CREATOR CHINA 2011 03 WWW CREATOR1997 COM PGMIII Programmable Ethernet Control System 7 6 2 4 SET_COM void SET_COM String dev int channel long sband int databit int jo int stopbit int dataStream int comType Function Setup the COM interface Parameters dev device name chamnel Device channel number sband Baud Rate databit data bit 1 8 jo Parity 0 none 1 Odd number 2 even number 3 Mark 4 space stopbit Stop bit 10 15 20 corresponding to 10 1 15 1 5 20 2 dataStream Data flow 0 75 1 xon xoff 2 hardware comType COM interface communication type 232 485 422 default value is 232 Sample Com_m M 1000 COM define the COM interface with the moth
28. Control Panel Feature Description Development Tools Demos The Java 2 SDK SE v1 4 2 Source Code including private j2re1 4 2 This Public Java Runtime Environment Be Goi 120 MB on your hard Install to C j2sdk1 4 24 Click Change installation path then click Next to choose your preferred je Java 2 SDK SE v1 4 2 Browser Registration Browser Registration Select the browsers you want to register with Java TM Plug In Microsoft Internet Explorer You may change the settings later in the Java TM Plug In Control Panel Cancel Click Install ii Java 2 SDK SE v1 4 2 Progress Installing Java 2 SDK SE 1 4 2 The program Features you selected are being installed Please wait while the InstallShield Wizard installs Java 2 SDK SE v1 4 2 This may take several minutes Status Copying new files This may take several minutes The InstallShield Wizard has successfully installed Java 2 SDK SE v1 4 2 Click Finish to exit the wizard Click Finish to finish the installation 7 4 Set up the correct path jdk After the installation double click Think Control 1 0 s short cut to launch the Think Control 1 0 programming software E think Control 1 0 i File E Edit E View Project P tools I Setting S Help 2 me aro le aX Connect 192 168 1 20 7755 Click setting Options from the menu bar CREATOR CHINA 201
29. GMIII Programmable Ethernet Control System Chapter One General Introduction CR PGMIIl is a patent Programmable Ethernet Controller launched by CREAOTOR It has applied 32bit 667MHz ARM11 CPU 256M RAM and 1G Flash Memory The CR PGMIII Controller Programmable Ethernet provides multi types interfaces 3 types of network controlling ports CR NET CR LINK and Ethernet IR I O RELAY and COM Ports etc controlling Advanced IC Technology has been applied to provide high speed accurate integrated control and the Open Programming UI ensures the easiness of programming for various complicated controlling functions 1 1 Main Features Elegant design integrated with both popularity and fashion 9 ARM11 Memory CPU 256M DDR RAM 1G Flash 667MHz 32bit powerful CPU 9 8 IR Control modules supporting multiple same or different independent programmable equipment through IR 8 independent programmable RS 232 422 485 Controlling interfaces allowing users to program and set multiple types of controlling protocols and codes 8 low current replay modules 9 8 digital I O Modules 9 3 types of network communication CR NET CR Link Ethernet USB2 0 programming communication interface builttin IR Learning module easy for diagnosing and maintenance both local and remote control supported Universal p