HXDU2RFID_Man_ENG
Contents
1. Hamet TRANSPONDER HDD 2 5 USB 2 0 SATA ENCRYPTED STORAGE USER MANUAL HXDU2RFID www hamletcom com Dear Customer thanks for choosing an Hamlet product Please carefully follow the instructions for its use and maintenance and once this item has run its life span we kindly ask You to dispose of it in an environmentally friendly way by putting it in the separate bins for electrical electronic waste or to bring it back to your retailer who will collect it for free WEEE Information for European Union member users According to the WEEE Waste Electrical and Electronic Equipment Directive do not dispose of this product as household waste or commercial waste Waste electrical and electronic equipment should be appropriately collected and recycled as required by practices established for your country For information on recycling of this product please contact your local authorities your household waste disposal service or the shop where you purchased the product We inform You this product is manufactured with materials and components in compliance with RoHS Directive 2002 95 CE 2002 96 CE 2003 108 CE with WEEE Directive 2003 96 CE Italian Legislative Decree 2005 151 and EMC Directive 2004 108 EC for the following standards EN 55022 2006 EN 55024 1998 A1 2001 A2 2003 CE The complete CE declaration of conformity of the product can be obtained by contacting Hamlet at info hamletcom com specifying2. the product code and the documentation The information on the importer for your country are available in the About Us section of the Hamlet website at www hamletcom com About this manual This manual is for information only and may change without notice Although this document has been compiled with accuracy Hamlet assumes no responsibility for any errors or omissions and use of information contained in it Hamlet reserves the right to modify or update the product and the manual without reservation and without notice Trademarks All trademarks and company names mentioned in this manual are used for description purpose only and remain property of their respective owners Safety Instructions Always read the safety instructions carefully e Keep this User s Manual for future reference e Keep this equipment away from humidity If any of the following situations arises get the equipment checked by a service technician e The equipment has been exposed to moisture e The equipment has been dropped and damaged e The equipment has obvious sign of breakage e The equipment has not been working well or you cannot get it to work according to the User s Manual Important information Any loss corruption or destruction of data while using a Hamlet drive is the sole responsibility of the user and under no circumstances will Hamlet be held liable for the recovery or restoration of this data To help prevent the loss of you
3. ash The device is now ready for setup encryption 3 Take out one of the RFID key and pass it close to the induction area of the enclosure A beep sound will be given off and the Green LED L indicator will start flashing when the RFID key works 4 Now take out the other RFID key and repeat the previous operation within three minutes 5 Ifthe setup process is completed successfully the Green LED L on the case lights up fixed NOTE The RFID external drive will be back in waiting mode if the second RFID key can not be sensed in three minutes Please repeat the procedure with the RFID keys all over again if you did not complete the setup Establish partitions 1 Once the device is connected and the computer has detected the hard disk installation click My Computer icon and select the Manage option 2 When the Computer Management screen opens click on the Disk Management option under the Storage category 3 Right click an unallocated region on your hard disk then select New partition The New Partition Wizard will start Select Primary Partition then click Next Type the size of the volume you want to create in megabytes MB or accept the maximum default size and then click Next Select Assign the following drive letter then click Next In the Format Partition dialog box do one of the following o If you don t want to format the volume right now click Do not format this volume and then
4. buy a new HXDU2RFID external enclosure install the encrypted hard drive into the new enclosure and setup the encryption with the two original RFID keys again The external disk is ready to work when the green LED lights up 5 Specifications High Speed USB 2 0 interface up to 480Mbits Compatible with USB 1 1 Supports 2 5 SATA Hard Disk Drives Compatible with SATA 1 and SATA 2 hard disk interface Two RFID induction cards included RFID induction card TAG EM4100 EM4102 T5557 compatible RFID Frequency 125KHz 6 AES 128 Bit encryption RFID Induction distance 5 10 mm Operating voltage 5V Weight 66g without HDD Dimensions 13 2 L 7 9 W 1 2 H cm Supports Windows 2000 XP Vista 7 Mac OS 9 X Specifications and appearance are subject to change without notice
5. click Next o To format the volume with the default settings NTFS click Next 9 After your drive has completed formatting it will say that you are finished Click Finish 10 Once the formatting procedure is completed the drive will show up under My computer as another hard drive Oar oo N 3 2 Decrypt Once you set the encryption on the device you must unlock the hard disk using one of the RFID key included to display and transfer your data as shown in the following steps 1 2 3 Connect the encrypted external drive to the computer The external drive will give off one short beep sound and the Red light K will be switched on Take out one of the RFID key and close it to the induction area Two short beep sounds will be given off and the Green indicator L will switch on If only one long sound will be given off the decryption failed Please try another RFID key The external drive will be ready to work after the system recognize it 3 3 Remove the encryption 1 2 Please backup the data in the hard drive and connect it to the computer with any other external enclosure After the system recognizes the hard drive setup the partition again WARNING If both keys are lost when the drive is in encrypted mode your data will not be recoverable 3 4 Remove the device 1 2 Before disconnecting the device use the RFID key and close it to the induction area to encrypt the hard drive T
6. h Description Waiting for authentication of the first RFID key Induction error Encrypted HDD Waiting for authentication of the second RFID key HDD unencrypted and ready to use Hardware installation Remove the top cover of the enclosure Connect the 2 5 SATA hard drive carefully to the SATA connector of the enclosure Put the top cover back to the case and fix it with the screws The hardware installation is complete 3 Using the device 3 1 Setup Hard Drive encryption Before setup the hard drive encryption all the existing partition should be deleted Please backup all the files in the hard drive before setup The operations described in the following steps refer to the Windows operating system Delete partitions 1 2 3 4 To delete all partitions right click on My Computer icon and select the Manage option When the Computer Management screen opens click on the Disk Management option under the Storage category Right click on the partition you would like to delete and choose the Delete Partition option After all deletions are completed please turn off and disconnect the device from computer Setup RFID induction keys 1 Please connect the Hamlet Transponder HDD to the computer with the included USB cable the system will detect the RFID device automatically The drive will give off three short and one long beep sounds and the Red LED K indicator will fl
7. he external drive will give off a one short beep sound The Green LED L will disappear and the Red LED will lights up indicating that the device is encrypted and ready to remove Now you can turn off the enclosure and disconnect it from the computer 4 Questions amp Answers What s the difference between plugging one and two USB connectors while using the USB double headed Y type cable For an external USB device such as a hard drive we provide a double headed Y type USB cable to ensure the drive can obtain enough power for operation Basically with our 2 5 external enclosure products you need to plug only one USB connector the first one with main cable Some computers don t provide enough USB power or some hard drive with high rotation speed may need more power in these situations you will need to use both of the connectors What if lost the RFID key There are two RFID keys enclosed in the package If you lost one of them you can still use another one to decrypt the HXDU2RFID external disk as long as you have setup the encryption but you cannot setup the encryption on a new hard drive IMPORTANT NOTE The two keys are unique with your HXDU2RFID external enclosure If you lost both of them your data will be locked in the hard drive and will be unable to access it Please backup data immediately if you lost one key How to access the encrypted hard drive if the external enclosure is broken You have to
8. r data it is highly recommended that you keep TWO copies of your data one copy on your external hard drive for instance and a second copy either on your internal hard drive another external hard drive or some other form of removable storage media 1 Introduction The Transponder HDD is a 2 5 external Hard Drive enclosure with RFID encryption technology This device has a unigue encryption function for ensuring high security to your files and supporting 2 5 high capability SATA hard drive It connects to the PC via USB 2 0 high speed interface which enables data transfer with maximum compatibility and stability Features e RFID hard drive encryption with two RFID sensor keys e No additional software installation needed for accessing data e Supports 2 5 SATA hard disk drive e Plug and Play amp Hot swappable connection Supports USB 2 0 transfer rate 480Mbits Package Contents USB 2 0 RFID HDD enclosure 2x RFID induction key USB 2 0 cable User manual System Requirements Windows 2000 XP Vista 7 Mac OS 9 x Apple USB support 1 3 5 and greater and Mac OS X 10 1 and above Standard USB port USB 2 0 recommended for maximum performance 32MB RAM or above Front and side panel Red LED Induction area Green LED Power connector USB Port LED Appearance Red Flashing fast Flashing slowly ON fixed Green Flashing ON fixed Power LED ON OFF switc
Download Pdf Manuals
Related Search
HXDU2RFID_Man_ENG