The New Generation of Wireless Access Control Systems
Contents
1. filtering cut off high voltages above 15V of high quality must be used 2 Please refer to section 8 How to Activate the Tag All information is subject to change without notice All other products and brand names are registered trademarks of their respective companies 2010 10 31 US 1 01 Copyright 2005 2010 All rights reserved MVC DataApS Skalhuse5 9240Nibe Denmark Web www mvec data com E mail info mvc data com Phone 45 25 12 8402 5 Pi AccessZone GC200 Series Installation amp User Manual MVC Data 4 Wiring The GC200 series are equipped with a simple wiring scheme with a 2 5 meter 8 cores wire ore Colo gna ame De ptio Black 0 V GND Power Supply Red 12 VDC Brown Activate Tag IN1 Makes the Bluetooth Tag active visible when pulled to GND black core Refer to the section 8 Green Firmware IN2 Firmware update Must be pulled to GND black wire during power up to activate built in bootloader Orange NC Not connected Blue NC Not connected Yellow NC Not connected White NC Not connected And Redshort UART RX gt PC TX Firmware upgrade from PC Blacksnort UART TX gt PC RX Refer to AccessZone Firmware Update User Manual for details Caution Be careful not to short the Redshort and BlacKshort wire It will prevent normal operation application is not started Several beeps indicate error 5 Mounting The GC200 system2. AccessZone GC200 Series Installation amp User Manual MVC Data GC200 Series Installation amp User Manual Jew Generation of Wireless Access Control Systems Installation amp User Manual GC200 with firmware Ver 0 39 and above HW revision 03 For modules with serial numbers from 0011009 All information is subject to change without notice All other products and brand names are registered trademarks of their respective companies 2010 10 31 US 1 01 Copyright 2005 2010 All rights reserved MVC DataApS Skalhuse5 9240Nibe Denmark Web www mvec data com E mail info mvc data com Phone 45 25 12 8402 1 pi AccessZone GC200 Series Installation amp User Manual MVC Data AccessZone System A Key to a Safer Future This is the installation and user manual for the AccessZone GC200 series It is a Bluetooth long range tag and can be detected 100 meter away It can be used instead of a mobile phone PDA or GPS with Bluetooth and where additional distance is required It is ideal for use with cars trucks and wheelchairs etc and give a simple and fast access to the secured area It covers the following AccessZone GC200 series GC201 100 meter long range Bluetooth tag 12V Sia The GC200 Tag can be visible active for 5 seconds from last activation or always depending on installation configuration AccessZone GC200 AccessZone GC200 with 1 input Form factor 127 x 47x 8 mm Get ea
3. can be mounted on any none metallic plane surfaces indoor and outside The radio waves can penetrate most none metallic walls A typical installation is on the front of cars trucks and on wheelchairs It is possible to make a hidden installation under none metallic surfaces due to the use of radio waves It is recommended to install all GC200 tags in the same way on all cars trucks and wheelchairs to ensure a similar signal radiation The transmit power and detection range may need adjust to compensate for the chosen installation This is done in the AccessZone Access Control System Make sure that the GC200 system is firmly secured to the installation surface Use appropriate screws and do not expose the unit to heat Caution 1 Metallic surfaces will reflect prevent radiation of the radio waves used with Bluetooth Keep a good distance to metallic surfaces al Requires a 24V to 12V DC converter with good filtering 3 Status LED s are not visible All information is subject to change without notice All other products and brand names are registered trademarks of their respective companies 2010 10 31 US 1 01 Copyright 2005 2010 All rights reserved MVC DataApS Skalhuse5 9240 Nibe Denmark Web www mvc data com E mail info mvc data com Phone 45 25 12 84 02 6 7 AccessZone GC200 Series Installation amp User Manual MVC Data 6 Front LEDs The GC200 series have 1 internally controlled blue LED for system in
4. dications The blue LED flashes when it is active l e it can be detected from the AccessZone Access Control System The blue LED flashes twice as fast as long as the brown wire is held to GND This means that it is possible to see if it is running on a timer slow flashing and when it is held to GND fast flashing 7 Factory Reset It should never be necessary to perform a factory reset 8 How to Activate the Tag The brown wire IN1 must be held to GND black wire to make the Bluetooth Tag active visible for the AccessZone Access Control System This can be done by pulling the brown wire to GND through a button or switch When the brown wire is removed from GND again it will stay visible for 5 s and then become invisible The brown wire can also be connected to GND black wire to allow it to be visible al the time it is powered E g this could be used on cars trucks and wheelchairs The Tag is then first powered when ignition is ON All information is subject to change without notice All other products and brand names are registered trademarks of their respective companies 2010 10 31 US 1 01 Copyright 2005 2010 All rights reserved MVC DataApS Skalhuse5 9240Nibe Denmark Web www mvec data com E mail info mvc data com Phone 45 25 12 8402 7 7
5. spective companies 2010 10 31 US 1 01 Copyright 2005 2010 All rights reserved MVC DataApS Skalhuse5 9240Nibe Denmark Web www mvec data com E mail info mvc data com Phone 45 25 12 8402 3 7 AccessZone GC200 Series Installation amp User Manual MVC Data Table of Contents L Disclaimers isnan A EOE EAO NET REAREN 3 2 Systemi OVE Wice E E E E eee 5 3 SPECHCIIO eers a ATT ET A EE 5 A WINE aissein aaa aoaaa a aa aaa 6 S MOUNUMEN A a R E E E ERA E E V A E 6 Or From LEDS ceninin nanna a a aa n a mataqeseaten 7 Ko CLOT ROSO oae E E E E E E A E A E 7 e HowtoActivate the Tagasccmiiarnaininnn na E 7 All information is subject to change without notice All other products and brand names are registered trademarks of their respective companies 2010 10 31 US 1 01 Copyright 2005 2010 All rights reserved MVC DataApS Skalhuse5 9240 Nibe Denmark Web www mvc data com E mail info mvc data com Phone 45 25 12 84 02 4 7 AccessZone GC200 Series Installation amp User Manual MVC Data 2 System Overview This section presents a system overview Input 1 IN1 Activate tag Visible 3 Specification Description Dimensions Weight P Operation temp Humidity Electrical Supply Power Outputs a Inputs 127 x47 x8 mm HxWxD 100g 67 30 C 80 C 100 12V DC max 60mA max 1W 0 outputs 1 input 1 A 200mA low noise power supply or accumulator with spike
6. sy and seamless accesses to the secured area with your mobile phone working as a secure access key from a distance from 0 1 up to 10 meters All information is subject to change without notice All other products and brand names are registered trademarks of their respective companies 2010 10 31 US 1 01 Copyright 2005 2010 All rights reserved MVC DataApS Skalhuse5 9240Nibe Denmark Web www mvc data com E mail info mvc data com Phone 45 25 12 84 02 2 7 AccessZone GC200 Series Installation amp User Manual MVC Data 1 Disclaimers All rights reserved MVC Data ApS assumes no responsibility for any errors in this manual MVC Data ApS is constantly working to improve its products and offer new features in collaboration with customers and partners Therefore MVC Data ApS reserves the right to change the hardware software and or specifications without notice and shall have no obligation to update the information contained in this manual MVC Data ApS s products are not authorized for use as system critical components in life supporting devices or systems AccessZone is a registered trademark of MVC Data ApS The Bluetooth trademark is owned by the Bluetooth SIG All other trademarks are owned by their respective owners The displayed screens may differ Copyright 2005 2010 MVC Data ApS All information is subject to change without notice All other products and brand names are registered trademarks of their re
Download Pdf Manuals
Related Search