Nilfisk GM 810/811 Vacuum User Manual
Contents
1. www sylvane com 1 800 934 9194 Filter Filter Bag and Trolley OC RON No Item No 21573001 22394900 11693700 11641000 11730410 22132000 81585000 Description EXHAUST WITH DIFFUSER EXHAUST FILTER WITH MICRO STATIC DIFFUSER DIFFUSER FILTERS 2 PCS MICRO STATIC FILTER MICROFILTER HANDLE COMPLETE DUST BAG www sylvane com 1 800 934 9194 Motors 20 21 22 23 24 Item No 12108129 12108329 12108353 12108529 12110129 12112353 12110329 22232301 22410300 22231201 22410500 22410400 20705300 20705400 20705500 Description MOTOR GSP 110 120V UL MOTOR GSPJ 110 120V UL MOTOR GSP 220 240V UL MOTOR GSPJ 110 120V UL MOTOR GMP 110 120V UL MOTOR GMPJ 220 240V UL MOTOR GMPJ 110 120V UL TOP HOUSING FOR GS GM MOTORS UL APPROVED SUPPORT RING FOR UL APPROVED GS GM MOTOR BOTTOM HOUSING WITH VALVE FOR GM MOTOR UL APPROVED ON OFF DEVICE FOR GS GM MOTORS LOCKING DEVICE FOR HANDLE GS GM MOTORS THERMO VALVE COMPLETE WITH PART FOR GM GS MOTOR HEAD TWO PRONG SOCKET WITH PARTS FOR GM GS MOTOR HEAD GROUNDED SOCKET WITH PARTS FOR GM GS MOTOR HEAD 11 www sylvane com 1 800 934 9194 Internal Motor Components No Item No Description 12125001 MOTOR GSP GSPJ 100 120V 12125002 MOTOR GSP GSPJ 200 240V 12125003 MOTOR GMP GMPJ 110 120V 12125005 MOTOR GMP GMPJ 220 240V 22130500 WIRE KIT THERMO SWITCH FOR UL APPROVED MOTOR 22132. Nilfisk vacuum cleaner delivers the years of trouble free operation for which it was designed it is necessary to check and replace filters regularly 1 Main Filter The large napped cotton bag which is semi permanently mounted inside the container will not reguire freguent replacement The main filter must be replaced when 4 l the cleaner no longer develops powerful suction vet bags are not full and other filter components are not clogged Extend 12 main filter service life by frequent changes of disposable 8 polyliners and paper bags photo 7 Photo 7 2 Microfilter This small felt polyester sock which fits over the motor bottom will require periodic inspection Dust will discolor the microfilter Change the microfilter as soon as any discoloration is easily noticeable Do not shake this microfilter since this can cause liberation of potentially harmful microscopic dust into the air Carefully remove and discard with collected debris in the sealable poly bag If www sylvane com 1 800 934 9194 eguipped with a Gore Tex microfilter the same rules for periodic inspection and disposal apply The Gore Tex microfilter has a clamp that holds it in place The Gore Tex filter must be changed when any abrasions damage or heavy discoloration is noticed on the surface of the filter refer to photo 1 3 HEPA or ULPA Exhaust Filter This cartridge is mounted on the top of the motor outside the container If
3. the main filter and microfilter are properly maintained the glass fiber element in the exhaust filter should perform satisfactorily for a minimum of one year It cannot be renewed or restored Exact life will depend upon freguency of use and amount and type of material collected Normally four changes of microfilter egual one change of HEPA ULPA filters Remove the protective metal casing and replace the pleated glass fiber cartridge according to the accompanying instructions photo 8 Cartridges must be replaced more freguently if the cleaner has had unusually heavy use or if the various pre filters have been neglected Photo 8 CAUTION Use only genuine Nilfisk replacement filter components The use of substitute components could pose a grave risk of personal exposure and will cause all eguipment warranties to be void TROUBLESHOOTING Loss of Power 1 Make sure the power cord is properly fastened to the motor head and it is properly plugged into the socket 2 Be sure the electrical circuit has not blown a fuse 3 If the circuit is functioning properly but there is still no power contact our Customer Service Department at 800 645 3475 extension 2 Loss of Suction If the GM 80 loses suction power during operation there mav be several reasons the most likelv of which is a full container Suction loss is gradual as the container fills with debris Check to see if there is anv blockage or restriction in the hos
4. 0 Dimensions I x w x h 14x12x16 inches Waterlift max 102 inches H2O Weight without accessories 11 Ibs Airflow max 87 cfm Cord length 30 feet Air performance 250 air watts With pressure relief valve inactive Filter area included paper bag main filter microfilter HEPA CONTACT INFORMATION Nilfisk Advance America Inc SEE 300 Technology Drive Nilfisk Malvern PA 19355 d Advance setting standards Phone 610 647 6420 Fax 610 647 6427 questions nilfisk advance com www pa nilfisk advance com www sylvane com 1 800 934 9194 15
5. 0 V 3 017020 00 LOWER CONTAINER 017091 00 MOTOR HOLD DOWN RING 017092 11 LATCH 805521 00 WASHER 815406 00 SCREW 4MM X 5MM 705265 10 NUT 4MM ESN 712386 00 SPRING CUP 017093 16 KEEPER 815407 00 SCREW 4MM X 10MM 12 815406 00 SCREW 4MM X 5MM 13 805521 00 WASHER 14 815406 00 SCREW 4MM X 5MM 15 017094 01 ADAPTER 16 805521 00 WASHER 17 017092 11 LATCH 18 815407 00 SCREW 19 705265 10 NUT 20 815418 00 GASKET 21 815419 00 RING 22 815417 00 SOCKET 23 814312 00 SCREW 24 017099 43 NUT 3 8 ESN 25 017024 11 NUT ESN 26 017847 00 WHEEL 27 017848 00 CASTER SWIVEL 28 017078 05 CASTER BRACKET 29 017078 15 WHEEL BRACKET 30 017643 00 BOLT 5 16 X 3 4 31 017645 00 WASHER 32 017644 00 NUT HEX 33 017672 00 WASHER 34 017849 00 HUB CAP 35 017078 11 WHEEL BOLT 36 017877 27 SCREW 8 32 X 1 2 37 017093 02 KEEPER 38 815407 00 SCREW 4MM X 10MM 39 705265 10 NUT 4MM ESN A O NO 0 k Ja O BRANMDNNMNAAAHPHI HHANMNHNAH HHA WWNANAAH BDDEBERBED HEPA Filter Kit 017104XX ULPA Filter Kit 017204XX www sylvane com 1 800 934 9194 No ONOoaRWND Item No 217377 01 717376 00 017247 01 017009 01 813950 00 821070 00 017010 05 017276 31 017376 31 Description HANDLE FILTER COVER HOLD DOWN PAD SEAL FOAM HEPA SCREW FILTER BASE SEAL FOAM BOTTOM HEPA FILTER includes item numbers 3 4 7 ULPA FILTER includes item numbers 3 4 7
6. 0501 INTERNAL WIRE AND CAPACITOR 22131100 ON OFF SWITCH 1 POLE 22131200 ON OFF SWITCH 2 POLE 22231100 MOTOR SUSPENSION PHILLIPS 22365300 SOUND ABSORBER AND GASKET 22399800 GASKET FOR INLET 12 www sylvane com 1 800 934 9194 Power Cords No Item No 21827400 21952200 22361000 22131600 Description 9 3M CORD AWG18 3 9 3M CORD AWG18 2 BRACKET W SCREWS FOR CORD BRACKET WITH SCREWS 13 www sylvane com 1 800 934 9194 Accessories z o DBONOOARWND Item No Description 11574100 HOSE 10 W INLET 38MM 11574000 HOSE 6 6 W INLET 38MM 11343900 HOSE EXTENSION 10 11343700 HOSE EXTENSION 6 6 11027200 STRAIGHT STEEL WAND 22 10944000 CURVED STEEL TUBE 1403816020 WHEELED FLOOR NOZZLE 16 11476000 16 CARPET NOZZLE 11476101 16 BARE FLOOR NOZZLE 10950200 ADJUSTABLE ROUND BRUSH 3 10950201 ADJUSTABLE ROUND BRUSH ma 3 WITH RED BRISTLES 3 10950202 ADJUSTABLE ROUND BRUSH WITH GREEN BRISTLES 3 8 10950203 ADJUSTABLE ROUND BRUSH WITH BLUE BRISTLES 3 ar 4 9 70945300 METAL FURNITURE NOZZLE 10 80956200 RUBBER CONE 8 11 10949500 CREVICE NOZZLE 12 1710100 45 DEGREE CREVICE NOZZLE DT 1 TETI mm 2 UM ID 00 11 12 14 TECHNICAL SPECIFICATIONS Motor type grounded GMPJ Tank capacity 3 1 4 gallons Voltage 60 Hz 110 120 220 volt Paper bag capacity 2 1 4 gallons Current draw 9 amps Filter area 1477 sguare inches Power watts 110
7. Nilfisk GM 810 811 INSTRUCTIONS FOR USE amp PARTS LIST Table of Contents Important Safety Instructions Warranty Machine Setup Using the Machine Emptying Disposal Maintenance Filter Replacement Troubleshooting Loss of Power Loss of Suction Parts Explosions Accessories Technical Specifications Contact Information www sylvane com 1 800 934 9194 10 15 15 For Instructions for Use on HEPA ULPA filter installation please refer to the addendum titled ABSOLUTE FILTERS End User Information www sylvane com 1 800 934 9194 IMPORTANT SAFETY INSTRUCTIONS PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE USING THE MACHINE DEPENDING ON LOCAL REGULATIONS AND THE COMPOSITION OF THE MATERIALS YOU HAVE COLLECTED THERE MAY BE REOUIRMENTS FOR SPECIAL HANDLING AND DISPOSAL OF THE COLLECTED DEBRIS CONSULT YOUR LOCAL OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION OSHA AND ENVIRONMENTAL PROTECTION AGENCY EPA OFFICIALS FOR DETAILS CAUTION This Nilfisk vacuum cleaner or any other vacuum cleaner is not to be used in explosion hazardous areas as serious injury could result Under no circumstances may this cleaner safely be used for the collection of hazardous or toxic materials unless eguipped with a special HEPA High Efficiency Particulate Air filter and bag which have been installed according to written instructions from Nilfisk Advance ATTENTION EMPLOYER Please ensure these Instructions for U
8. bottom of the container with its walls flush against the container sides and lipped under the container inlet photo 3 The excess length of polyliner is draped over the top of the container and down the outside then rolled at the end to permit the container clips to close Install a paper bag inside the polyliner according to the illustrations printed on the paper bag itself photo 4 Replace the top container and fasten the two clips Note Polyliners are optional If you choose not to use a polyliner Photo 4 follow the instructions to install the paper bag 4 The GM 810 and GM 811 offer a wide variety of hoses and accessories Consult your local District Sales Managers or Customer Service Department at 800 NILFISK for a list of optional hoses and accessories No matter what hose option you have chosen it can be connected in the following manner Affix the vacuum hose to the vacuum by inserting it into the orifice on the lower container Once it is inserted rotate the inlet coupler a guarter turn to lock it into place Consult your District Manager or the Customer Service Department if you have any problems attaching the accessories you have purchased USING THE MACHINE Starting and stopping Press the gray button on the upper front portion of the vacuum photo 5 Photo 5 Correct use of the machine This machine is not a wet dry vacuum It is intended for dry collection only Do not use
9. e 1 Check the condition of the main filter and microfilter refer to photos and determine whether there is an excessive loading of debris If there is overloading in the main filter you can shake it out If the microfilter is loaded or there is any other problem with the microfilter it needs to be replaced Call our Customer Service Department at 800 645 3475 extension 2 to order replacement filters 2 Ifall fails call our Customer Service Department at 800 645 3475 extension 2 www sylvane com 1 800 934 9194 GM 810 No Item No Description Qtv 1 115448 11 UPPER CONTAINER W 1 COTTON FILTER 2 121103 29 MOTOR COMPLETE 120 V 115447 10 LOWER CONTAINER 017091 00 MOTOR HOLD DOWN RING 017092 11 LATCH 805521 00 WASHER 815406 00 SCREW 4MM X 5MM 705265 10 NUT 4MM ESN 9 712386 00 SPRING CUP 10 017093 16 KEEPER 11 815407 00 SCREW 4MM X 10MM 12 705265 10 NUT 4MM ESN 13 815406 00 SCREW 4MM X 5MM 14 815406 00 SCREW 4MM X 5MM 15 815407 00 SCREW 4MM X 10MM 16 805521 00 WASHER 17 017092 11 LATCH 18 017094 10 ADAPTER 19 017093 05 KEEPER 20 815412 00 SCREW 4MM X 6MM 21 705265 10 NUT 4MM ESN 22 815419 00 RING 23 815418 00 GASKET 24 815417 00 SOCKET 25 814312 00 SCREW w A oO NO 0 DD RBRSSS0OONDNRERDNEEEEDDERBRBRD www sylvane com 1 800 934 9194 No Item No Description Qtv 1 115448 11 UPPER CONTAINER 1 W COTTON FILTER 2 121103 29 MOTOR COMPLETE 12
10. oth ways will be at the expense of the customer Eguipment shall not be returned without advance notice to and consent of the Nilfisk companies www sylvane com 1 800 934 9194 EXCEPT AS SPECIFICALLY SET FORTH HEREIN THE NILFISK COMPANIES MAKE NO WARRANTIES EITHER EXPRESSED OR IMPLIED AS TO ANY MATTER WHATSOEVER INCLUDING WITHOUT LIMITATION ANY AND ALL WARRANTIES OF MERCHANTABILITY FITNESS FOR PURPOSE OR OTHER WARRANTIES ALL OF WHICH ARE EXPRESSLY DISCLAIMED AND EXCLUDED NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR SPECIAL INDIRECT INCIDENTAL OR CONSEOUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO LOSS OF PRODUCTION LOSS OF TIME LOSS OF PROFITS OR OTHER SIMILAR INDIRECT LOSSES WHICH MIGHT OCCUR AS A RESULT OF DEFECTS PARTIAL OR TOTAL FAILURE OF THE PRODUCT TO PERFORM AS SPECIFIED Correction of non conformities or defects in the manner and for the period of time provided above shall constitute fulfillment of all liabilities of the Nilfisk companies to the customer whether based on contract negligence or otherwise with respect to or arising out of such eguipment The remedies set forth herein are exclusive and the liability of the Nilfisk companies with respect to this sale or anything done in connection therewith whether in contract in tort under any warranty or otherwise shall not except as expressly provided herein exceed the price of the eguipment or part on which such liabilitv is based The warrantv does not cove
11. r repairs due to normal wear and tear accident neglect misuse or abuse incorrect installation or use other than as described in the instruction booklet Breaks in hoses and cables are not covered This warrantv is rendered void if the motor number plate is removed or defaced or if repairs are made or attempted by persons not authorized by the Nilfisk companies MACHINE SET UP Before turning on the motor Install the microfilter 117304 10 Felt 017230 AES Polycomposite 017220 01 Gore Tex the small felt sock on the bottom of the motor by sliding the filter over the motor bottom and covering as much of the bottom as the depth of the filter will permit photo 1 Be sure the filter s elastic collar holds the filter snugly in place and is as high up on the motor bottom as possible 2 Next mount the HEPA ULPA filter 401710104XX 01710204XX according to the accompanying bulletin Place the motor back in the cavity in the top of the cleaner photo 2 Fasten the motor head in place using either the positive twist safety latches or the standard latches depending on which option you purchased Photo 2 www sylvane com 1 800 934 9194 3 Installing the Polyliner and Paper Bag Twist and release the two positive twist safety latches or the standard latches depending on your machine They are located on the body of the container front and back Lift off the top Open the polyliner and place in the
12. se are made available and understood by your employees or any other persons who may use this eguipment To list all toxic and hazardous materials would be beyond the scope of these Instructions It is the Employer s responsibility to identify for Employees and others information hazardous or toxic materials which may be collected by this eguipment Your new Nilfisk industrial vacuum cleaner is a precision engineered instrument designed for exceptionally fine filtration Ordinary vacuum cleaners do not have HEPA filters and cannot be safely used for hazardous dust collection This Nilfisk machine is safe to use with fine powders or hazardous materials as long as certain precautions are taken Proper care of this cleaner is essential to the maintenance of its ultrafine filtering capabilities BEFORE USE DO NOT ATTEMPT TO OPERATE THIS CLEANER UNTIL YOU HAVE INSTALLED ITS VARIOUS COMPONENTS ACCORDING TO THE FOLLOWING INSTRUCTIONS WARRANTY The Nilfisk companies warrant that Nilfisk eguipment will be free of defects in workmanship or material for a period of two years from the date of delivery Should any failure to conform to this warranty appear the Nilfisk companies shall upon notification within such time period correct such non conformity at its option either by repairing any defective part or parts or by replacing a part or parts provided that the eguipment is returned to an authorized Nilfisk service facility In all cases freight b
13. this vacuum to pick up liguids or any wet materials EMPTYING IF THIS VACUUM CLEANER IS USED TO COLLECT HAZARDOUS MATERIAL DO NOT ATTEMPT TO OPEN OR EMPTY ITS CONTENTS WITHOUT PERSONAL PROTECTIVE CLOTHING AND RESPIRATORY PROTECTION www sylvane com 1 800 934 9194 To empty the container and its contents first turn off the motor Allow the cleaner to sit undisturbed for at least thirty 30 seconds Then twist and release the container clips Once the seal is broken turn on the motor again This will prevent ultrafine particles which are still suspended in the air inside the container from escaping into the work place Lift off the container top Remove the polyliner and paper bag within it photo 6 Then seal off the polyliner with the paper bag inside and install a new polyliner and paper bag according to step 2 Machine Setup Photo 6 DISPOSAL Depending on local regulations and the composition of the material you have collected there can be a reguirement for special handling and labeling of the filled and sealed plastic bags Consult you local Occupational Safety and Health Administration OSHA and Environmental Protection Agency EPA official for details MAINTENANCE Routine Maintenance To ensure maximum performance of your Nilfisk vacuum cleaner be sure to check your main filter regularly Your filter may need to be shaken to remove caked dust from time to time Filter Replacement To ensure that your
Download Pdf Manuals
Related Search