User Manual
Contents
1. Backlight You can select OFF BLC 44 or HSBLCd by pushing left right If OFF is selected the system will not compensate the image If BLC is selected it will enhance the brightness of image to satisfy the monitor effect 17 d To enter into the submenu of BLC press Menu button Here you can setup GAIN Set the Backlight area High Middle or Low AREA Select the BLC area and the compensation area size after entering the Area menu DEFAULT Choose to go back to the default setting d Sub menu of HSBLC Here you can select the following Select Select the Backlight Compensation area 4 areas are selectable Display Choose to display the selected area or not Level Set the sensivity level of the compensation area Mode Set to Super Backlight Compensation available only at night or all day Black Mask Turn the black mask on or off This function blacks out the lightest images to give a clearer picture in varying light conditions Return Select Return and press Enter button to return to previous interface 6 3 White Balance Select WHITE BAL and push left or right to choose White balance mode including ATW AWC SET Indoor outdoor and manual tttttOoORtOoO ATW In this mode the camera will constantly monitor the colour temperature In order to keep the best picture the camera will automatically adjust the white balance AWC SET Select it and press the Menu button to go into the lock2. HD AD 1080P 2 25x Optical High Speed Weatherproof Adjustable Real Time Zoom Pan amp Tilt Rated Lens User Manual Version 1 Contents 1 Product Overview 1 1 Product Features 2 Product Contents 3 Protocol amp Baud Rate 4 Installation 5 Camera Operation 5 1 Set Preset Position 5 2 Set Cruise Tracks Transfer amp Delete 5 3 Set Auto Scanning Transfer amp Stop 6 OSD Menu 6 1 Lens Setup 6 2 Exposure 6 3 White Balance 6 4 Day amp Night 6 5 6 6 Special 6 7 6 8 Reset 6 Troubleshooting Warning AN a EET Caution To prevent electric shock and fire hazards please don t use a power supply not Warning To reduce the risk of listed in the manual electric shock non professional personnel should not remove the cover This symbol alerts the user to operate and maintain the product according to the manual N This symbol alerts the user to be careful as the product may lead to serious shock hazard Caution Any changes or modifications in construction of the product that are not approved by our company may affect the functionality of the camera Precautions gt Install and use the camera in an environment where temperatures DO NOT exceed 20 C 50 C and maintain good ventilation gt Do not use the camera in a high pressure or highly corrosive environment gt Do not install the camera in a place where lighting conditions are not stable 1
3. Re attach the main camera to the camera back through the bracket bracket To do this use a cross head screw driver and turn screws in clockwise 7 Lastly screw the bracket into the wall 5 Camera Operation The Speed Dome camera will be controlled through the DVR using the arrow keys etc However it is advised to use an external Speed Dome controller for more control over the camera 5 1 Set Preset Position Set the pan tilt rotation range through the DVR and store the numbers in the Dome Camera The user can also transfer preset positions refer to part 2 below 1 Set the Preset Position Move the Dome camera to the position that you want it to face using the joystick or DVR To set the preset position input the position number The user can add 128 preset positions For example to preset position 1 move the dome to the desired position Then input 1 and press SET Please Note This method will change depending on hardware used to control and access the camera 2 Transfer Preset Position To jump or transfer from one preset position to another simply input the prest number into the DVR or external keyboard and press the Call button For example to transfer to preset position 1 press 1 and then press the Call button 3 Clear Preset Position To clear a preset position input the preset number and then press Clear 5 2 Set Cruise Tracks Transfer a
4. Baud Rate To set the baud rate adjust the DIP switch to any of the combinations below to match your preferred settings Switcher Switcher Baudrate Baudrate 4 Set the protocol and camera model The camera will auto detect Pelco P or Pelco D the below is for camera model which does not need to be changed Switcher Switcher Model Status Status Jo Synchronized 3 4 5 Set the Dome IP Address The table below shows how to adjust the DIP switch to set the camera s ID N 12 ON eo Pig a m a sas m uE u m m m 2 12345678 oO lt O U n n D kej kej il po oO ta O ep n n o kej O p po eb ta O ep n n D so 4 Please Note The factory default ID is 1 and the Baud Rate is 2400 4 Installation The 1QC1920S2 is designed to be wall mounted using the cable managed bracket supplied To install the camera please follow the steps below 1 Remove the bracket from the main 2 Using the bracket as a stencil mark camera body by taking off the screws out the drill holes needed in the wall using a cross head screw driver 3 If feeding wires through the wall you 4 Drill the holes in the wall where you will need to drill a hole through the wall have made the marks Insert wall plugs for the wires to go However if placing here if required through the bracket you can just feed through the side 5 Now thread the cable from the main 6
5. mode of white balance Now the camera locks the reference value of red and blue under the current colour temperature and stops monitoring colour temperature Indoor ndoor white balance mode Outdoor Outdoor white balance mode Manual This option allows the user to manually set the White Balance Mode Select this mode and press the Menu button to setup User can adjust the level of the blue and red by pushing left or right button to adjust the blue or red gain The gains are adjustable between 0 100 18 Select Day amp Night and press the Menu D amp N AUTO button to setup Day amp Night mode and to PDELAY o gt D setup Smart NR You can choose between H P EDs Auto d Colour Bwe or External Ak d Sub Menu of Auto Here you can set the delay time between Day amp Night mode You can also manually adjust the AGC between Day to Night mode and Night to Day mode el Sub Menu of B W This option allows you to turn the burst off or on turn the Smart IR on or off and turn the LED on or off When turning on the Smart NR you will be presented with 2 options Firstly set the level of the Smart NR 0 15 and secondly select the areas for Smart NR to operate Select the Digital Noise Reduction Choose between 2D DNR 3D DNRd the sensitivity of the DNR or Smart NR el Sub Menu of 3D DNR This allows you to adjust the following S Level Set the DNR starting level 0 100 E Level Set the DNR ending leve
6. Product Overview Thank you for purchasing the 1QC1920S2 Internal External Mini Speed Dome Camera from IQCCTV The camera features a wide angle megapixel lens to capture more without the need to adjust the camera The dome is ideal for indoor or outdoor use IP66 Rated and has a cable managed and compact design The IQC range of HD SDI cameras from IQCCTV are designed to offer crystal clear images and amazing value for money 1 1 Product Features 1 oop 2 25x 1080P 2 25x Optical High Speed Real Time Zoom Pan amp Tilt A A Weatherproof Adjustable Rated Lens e Full HD 1080P Resolution e Cable Managed Bracket e Equivalent to 12x Optical e Durable High Quality Housing zoom on D1Resolution camera Internal External e IP 66 Rated e High Speed Pan Tilt amp Zoom 30 64 Viewing Angle 2 Product Contents Before installing this product please ensure that it contains the following 1x IQC1920S2 Speed Dome Camera 1x User Manual 1x 12 DC 500mA Power Supply 4x Screws 4x Wall Plugs 3 Protocol amp Baud Rate Please check the protocol and baud rate before installing the speed dome To match up the switcher identities please follow the steps below 1 Open up the inner case of the speed dome by loosening the screws on the cover Below 2 Inside the cover you will see 2 groups of switches Baud Rate and Camera Model ON DIP 423 4 56 7 8 Dome IP Address 3 Set the
7. Sharpness Set the sharpness on or off When turned on you will presented with a sub menu d Sub Menu of the adjust option allows you to adjust Level Adjust the level of sharpness from 0 100 Resolution Turn the resolution on or off Monitor Select the monitor display image LCD or CRT When choosing any of these options you will be presented with a sub menu d Sub Menu of LCD Here you can adjust the following Gamma Set the Gamma characteristics Auto User 1 User 2 0 45 1 Blue Gain Adjust the blue gain 0 100 Red Gain Adjust the red gain 0 100 el Sub Menu of CRT Here you can adjust the following Black Level Set the black level 0 100 Blue Gain Adjust the blue gain 0 100 Red Gain Adjust the red gain 0 100 OSD Set the OSD menu characteristics d Sub Menu of OSD allows you to adjust the following Text Colour Adjust the OSD menu text colour 8 colours are selectable Outline Set the character outline either on or off LSC Turn the lens edge correction function on or off NTSC PAL Set the signal system setting either NTSC or PAL 6 8 Reset Select Reset and press Enter button to go into its setup interface Then Select Factory settings to reset the camera to factory default 7 Troubleshooting Trouble Shooting Problem Possible Cause Solution Power Supply Damage Change the PSU l C Change the No Picture ncorrect Connection Connections Damage to the Wiring Check the Wiri
8. eas or all 3 Display Turn the motion detection on or off on selected areas Sensitivity Adjust the sensitivity of the motion detection 0 60 Motion View Set a prompt for when moving objects are detected Default Return to factory default settings Privacy This option allows you to set the private protection area When turning the function on you will enter into a sub menu to select privact areas Up to 8 areas are selectable d Sub Menu of the Privacy menu adjust the following Display Turn on the display Position Size or turn off the privacy function Colour Set the Colour of the privacy protection 1 16 colours Default Return to factory default settings Language Select your desired language English Japanese Traditional Chinese and Simplified Chinese Defect Turn this function off to correct any dead pixels When this is turned on you will enter into a sub menu d Sub Menu of Defect will allow you to set the following Live DPC Live dead pixel correction turn this function on or off Level Set the sensitivity level of the live correction function 0 60 Static DPC Static dead pixel correction function turn this function on or off Level Set the sensitivity level of the static correction function 0 60 Sens up Extends the exposure time of camera RS485 This option allows the user to set the CAM ID ID Display and set the Baudrate Version View the version details of the camera 6 7 Adjust
9. he number press 74 and then 75 By doing this the cruise track will stop on the 74th minute and then go back to preset 1 on the 75th minute Please Note The time can be set between 1 240 minute and the factory default setting is 1 minute The OSD menu allows the user alter the settings on the camera such as lens Day amp Night mode RS485 settings and reset the camera to the factory default m v my gt ozo m r OONONAWUN O xmovI gt rxm c vem lt vz v AMCO emoun 4 n aa gt c E gt m ac To enter into the menu press the Open or IRIS on the Speed Dome controller Select the lens type The camera supports manual IRIS and DC Lens Once in DC SETUP Lens the user can set the mode of the tat EAS DC lens Exposure setup includes Shutter AGC Sens up Brightness Defog and Backlight Shutter Set between 1 30 1 50 000 EXP SHU AGC SEN BRI ACC DEF BAC RET AGC When there is insufficient light push left right to set the Automatic Gain Control Sens up Extends the exposure time of camera The higher the time the lower the frame will be However the shadow created will be longer in dark conditions Please select OFF or Auto Brightness Push left right to setup the value of brightness ACCE Turn the ACCE on or off Defog In foggy weather you can setup this function to see the object behind fog clearly There are four options low middle high off
10. l 0 100 Push right left to setup CAMERA TITLE MOTION PRIVACY DEFECT etc z3 accront m r Camera Title Press Enter button to select On Off When selecting On the title edition and the position selection of the title is effective User can press the direction button to self define the camera name After selecting the single letter number or symbol please press Enter button to go into the camera title position setup User can push the direction button to set up 19 z2 lt z2orvECO O mmom gt soi gt v HDAN mE M ceone lt n zo gt 0OzMmM gt z o lt O rP za n onn n m Bet emooto mre o d D D Effect Setting of digital functions Press the Menu button to enter into the sub menu d Sub Menu of D Effect This allows you to set the following functions Freeze Set the freeze function to on or off Mirror Set the mirror function mirror V flip or rotate D Zoom Set the digital zoom function You can set to x2 x64 or on off If you select on you will be presented with anohter sub menu allowing you to set the PIP adjust the digital zoom x2 x64 Pan Tilt or return to default Negative Image Turn the negative image function on or off Motion Set the motion detection functon on or off If you turn the motion detection function on you will be presented with a sub menu d Sub menu of Motion Detection Here you can select the following Select Select between 3 ar
11. mp Delete The Speed Dome camera allows the user to set a preset cruise so that the camera will pan through these presets without having to adjust the camera manually The camera has 5 lines of auto cruise tracks and each line can store a minimm of 16 presets up to a maximum of 64 1 Transfer Cruising Tracks To switch between different cruising tracks for example switch from preset position 81 to 82 simply input 82 into the DVR or keyboard and press the Call button Please Note If the preset position is unclear the preset position cannot be cruised 2 Setting Preset Stay Time This option allows the user set the amount of time that the camera stays in each preset position Each camera can be in each position for 1 240 seconds For example to set the time of preset 78 to 10 seconds A Input 78 B Press Call C Input 10 D Press Set If there is no time set the default time is 3 seconds 3 Inter Cruising Track Transfer Use preset position 89 to set inter cruising track transfer that contains 8 cruising points The stay time for each of these points will be 3 seconds 4 Stop the Cruise Tracks Use the set position 86 or stop the cruise tracks 5 3 Set Auto Scanning Transfer amp Stop The camera revolves on a 360 angle and can automatically scan in certain preset positions using the DVR or Speed Dome Controller 1 Set Auto Scanning A Move the dome to the left limit using
12. ng Wrong connection of control Ae Successful Camera 3 signals Check the Wiring test but still no image Replace the Camera Camera is Damaged Wrong connection of control Check the Wiring signals Change the Camera Successful test but Wrong Camera ID DIP Switch to match cannot control the control system the camera Change the Baudrate or Protocol to match Incorrect Protocol or Baudrate the control system Incorrect Self testing Restart the Camera Cannot Control Camera Loose connection on the Check the wiring control cable Adjust the lens Unclear Image Camera is not in focus Clean the Housing Manufactured for Toreen AY GUL CE RoHSe TECHNICAL SUPPORT For technical support please contact your local distributor Alternatively call 0871 222 1430 LIMITED WARRANTY This product is supplied with a 12 month warranty The warranty excludes products that have been misused including accidental damage and damage caused by normal wear and tear In the unlikely event that you encounter a problem with this product it should be returned to the place of purchase IQCCTV Unit 2 Valley Point Beddington Farm Road Croydon Surrey CRO 4WP www iqcctv co uk
13. the joystick B Press 62 C Press Set D Move the dome to the right limit using the joystick E Input 63 F Press Set 2 Set the Scanning Speed To set up the scanning speed use the DVR or Speed Dome controller To set a speed of 5 simply input 5 into the keyboard For example to set a scanning speed of 15 on preset 77 A Input 77 B Press Call C Input 15 D Press Set 3 Carry Out Auto Scanning To set auto scanning use the transfer preset position 84 Before doing this please set the left and right limit points For example set up the auto scanning function using the keyboard by inputting 84 and pressing the Call button 4 Stop Auto Scanning Set the Preset position to 86 or move the joystick to stop auto scanning For example to stop scanning using the keyboard A Input 86 B Press Call 5 Tracking Function No Preset Position Auto Scanning Function 81 Transfer First 0 16 Preset Position 82 Transfer Second 17 32 Preset Position Te ere mieten Peeve area 6 360 Auto Scanning To begin auto scanning press Auto The set the scanning speed please refer to section 5 3 on page 14 7 Back to Preset Position The camera can set the preset position back to 1 even if nobody operates the camera For example to set the camera back to preset 1 after 75 minutes transfer No 76 and input 75 to represent 75 minutes After you have inputted t
Download Pdf Manuals
Related Search