matrix panel 4x4 with high output tri
Contents
1. Wluxibe LX109 MATRIX PANEL 4X4 WITH HIGH OUTPUT TRI COLOUR LEDS USER MANUAL LX109 1 Introduction To all residents of the European Union Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment Do not dispose of the unit or batteries as unsorted municipal waste it Should be taken to a specialized company for recycling This device should be returned to your distributor or to a local recycling service Respect the local environmental rules f in doubt contact your local waste disposal authorities Thank you for choosing Luxibel Please read the manual thoroughly before bringing this device into service If the device was damaged in transit don t install or use it and contact your dealer 2 Safety Instructions Be very careful during the installation touching live wires can cause life threatening electroshocks Always disconnect mains power when device not in use or when servicing or maintenance activities are performed Handle the power cord by the plug only Indoor use only Keep this device away from rain moisture splashing and dripping liquids Never put objects filled with liquids on top of or close to the device Keep this device away from children and unauthorized users Caution device heats up during use Do not stare directly at the light2. Signal by electrical noise The DMX terminator is simply an XLR plug with 120 0 resistor between pins 2 and 3 which is then plugged into the XLR output socket of the last device in the chain 8 Operation The LX109 can be used the following modes e stand alone mode automatic master slave e with a DMX512 controller 8 1 Using the Control Panel UPF DOWN Access the control panel functions using the four panel buttons located near the display Button Function lt MENU gt used to access the menu or to return to a previous menu option V 03 27 01 2014 4 Velleman nv LX109 lt UP gt scrolls through the menu options in ascending order lt DOWN gt scrolls through the menu options in descending order lt ENTER gt used to select and store the current menu or option within the menu The control panel display shows the menu items you select from the menu map When a menu function 15 selected the display will show immediately the first available option for the selected menu function To select a menu item press lt ENTER gt e Use the lt UP gt and lt DOWN gt buttons to navigate the menu map and menu options Press lt ENTER gt to access the menu function currently displayed or to enable a menu option To return to the previous option or menu without changing the value press the lt MENU gt button The menu contains the following items e Auto Show e Static e Dimmer Mode e Back Lite e Info e
3. press lt ENTER gt 4 Use lt UP gt lt DOWN gt to set the DMX starting address 001 A512 and press lt ENTER gt DMX channel values 3 channel mode Channel From to Description 1 000 255 Red 2 000 255 Green 3 000 255 Blue 5 channel mode Channel From to Description 1 0 255 Red 2 0 255 Green 3 0 255 Blue 4 0 255 Dimmer 0 0 Shutter No Function 1 5 Shutter Random Auto Show 6 10 Shutter Open 11 255 Shutter Strobe Slow to Fast 7 channel mode Channel From to Description 1 000 255 Red 2 000 255 Green 3 000 255 Blue 4 000 010 No Function 011 255 Strobe Slow to Fast 000 010 No Function 011 030 Chase 1 031 050 Chase 2 051 070 Chase 3 071 090 Chase 4 091 110 Chase 5 5 111 130 Chase 6 131 150 Chase 7 151 170 Chase 8 171 190 Chase 9 191 210 Chase 10 211 230 Chase 11 231 250 Chase 12 V 03 27 01 2014 6 Velleman nv LX109 Channel From to Description 251 255 Random Auto Show chase 1 12 6 000 255 Speed Slow to Fast 7 000 255 Dimmer 0 100 48 channel mode Channel From TO Description 1 000 255 Red 1 2 000 255 Green 1 3 000 255 Blue 1 4 000 255 Red 2 5 000 255 Green 2 6 000 255 Blue 2 7 000 255 Red 3 8 000 255 Green 3 9 000 255 Blue 3 10 000 255 Red 4 11 000 255 Green 4 12 000 255 Blue 4 13 000 255 Red 5 14 000 255 Green 5 15 000 255 Blue 5 16 000 255 Red 6 17 000 255 Green 6 18 000 255 Blue 6 19 000 255 Red 7 20 000 255 Green 7 21 000 255 Blue 7 22 000 25
4. source as this may cause e epileptic seizure in sensitive people e temporarily loss of sight flash blindness e permanent irreversible eye damage There user serviceable parts inside the device Refer to an authorized dealer for service and or spare parts e This device falls under protection class 1 It is therefore essential that the device be earthed Have qualified person carry out the electric connection e Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual e not crimp the power cord and protect it against damage Have an authorised dealer replace it if necessary e Use appropriate safety cable to fix the device e g VDLSC7N or VDLSC8N e Install the LX109 at a minimal distance of 0 5 m from flammable and explosive objects or substances Respect a minimum distance of 0 5 between the device s light output and any illuminated surface maximum ambient temperature is 40 C Do not operate the device at higher temperatures 3 General Guidelines Refer to the Velleman Service and Quality Warranty on the last pages of this manual openings are clear at all times For sufficient air circulation leave at least 1 2 5 cm in front D Keep this device away from dust and extreme temperatures Make sure the ventilation of the openings Protect this device from shocks and abuse Avoid brute force when operating the device
5. tear e The electric power supply cables must not show any damage Have a qualified technician maintain the device There are user serviceable parts apart from the fuse e Refer to an authorized dealer for service and or spare parts Replacing the fuse Only replace the fuse by a fuse of the same type and rating 1 Unplug the device s power cord from the outlet 2 Use a flat head screwdriver to remove the fuse holder 3 Remove the damaged fuse and replace with the same type of fuse 4 Insert the fuse holder back in its place and reconnect power 10 Technical Specifications power supply 100 240 VAC 50 60 Hz power consumption 390 W LED source 16 high power tri colour COB LEDs 10 W beam angle 63 pitch 115 mm DMX in and output 3 pin XLR dimensions 459 x 459 x 97 mm 205 2 mm with bracket weight 8 kg Use this device with original accessories only Velleman nv cannot be held responsible in the event of damage or injury resulting from incorrect use of this device For more info concerning this product and the latest version of this manual please visit our website www luxibel com The information in this manual is subject to change without prior notice COPYRIGHT NOTICE The copyright to this manual is owned by Velleman nv All worldwide rights reserved No part of this manual may be copied reproduced translated or reduced to any electronic medium or otherwise without the prior written consent of the co
6. 2014 3 Velleman nv LX109 e Refer to the Arkaos MediaMaster software manual for detailed instructions on programming this product www arkaospro com 7 Installation Choose a suitable mounting spot Mount the device in the desired angle using the included bracket Connect the power cord to the mains Disconnect after use Mounting the Device e Have the device installed by a qualified person respecting EN 60598 2 17 and all other applicable norms carrying construction must be able to support 10 times the weight of the device for 1 hour without deforming e The installation must always be secured with secondary attachment e g a safety cable e Never stand directly below the device when it is being mounted removed or serviced Have a qualified technician check the device once a year and once before you bring it into service e Install the device in a location with few passers by that is inaccessible to unauthorised persons e Overhead mounting requires extensive experience calculating workload limits determining the installation material to be used Have the material and the device itself checked regularly Do not attempt to install the device yourself if you lack these qualifications as improper installation may result in injuries e For truss mounting use an appropriate clamp not incl and fit an M10 bolt through the centre of the folded bracket e Adjust the desired inclination angle via the mounting brac
7. 5 Red 8 23 000 255 Greens 24 000 255 Blue 8 25 000 255 Red 9 26 000 255 Green 9 27 000 255 Blue 9 28 000 255 Red 10 29 000 255 Green 10 30 000 255 Blue 10 31 000 255 Red 11 32 000 255 Green 11 33 000 255 Blue 11 34 000 255 Red 12 35 000 255 Green 12 36 000 255 Blue 12 37 000 255 Red 13 38 000 255 Green 13 39 000 255 Blue 13 40 000 255 Red 14 41 000 255 Green 14 42 000 255 Blue 14 43 000 255 Red 15 44 000 255 Green 15 45 000 255 Blue 15 V 03 27 01 2014 7 Velleman nv LX109 Channel From TO Description 46 000 255 Red 16 47 000 255 Green 16 48 000 255 Blue 16 9 Cleaning and Maintenance Before starting any cleaning or maintenance activities 1 Unplug the device s power cord from the outlet 2 Let the device cool down Cleaning e Clean the external optics with a soft cloth Always be sure dry all parts completely before plugging the unit back Cleaning frequency depends on the environment in which the unit operates i e smoke fog residue dust dew Do not immerse the device any liquid Maintenance e All screws should be tightened and free of corrosion e The housing the lenses the mounting supports and the installation location e g ceiling Suspension trussing should not be deformed modified or tampered with e g do not drill extra holes in mounting Supports do not change the location of the connections e Mechanically moving parts must not show any signs of wear and
8. DMX Address e DMX Channel Master Slave e White Balance e Fan Speed e Temperature 8 2 Stand Alone Mode In stand alone mode the device runs one of the built in programs automatic or To set the device to stand alone mode 1 Connect nothing to the DMX input of the device 2 Press lt MENU gt until lt Auto Show gt is displayed and press lt ENTER gt 3 Use lt UP gt lt DOWN gt to select a built in program 8 3 Master Slave Mode The master slave mode allows connecting several devices to a single master device All slave devices will then work synchronously with the master device You need to set one device to master mode and all other devices to slave mode Connect all devices in series with DMX cables The first unit in the chain functions as the master device Set up the unit as described above On the master device press lt MENU gt until lt Master Slave gt is displayed and press lt ENTER gt Use lt UP gt lt DOWN gt to select lt Master gt and press lt ENTER gt On each slave device press lt MENU gt until lt Master Slave gt is displayed and press lt ENTER gt 6 Use lt UP gt and lt DOWN gt to select lt Slave gt and press lt ENTER gt ul Ba WN 8 4 DMX Mode The DMX mode allows you to control the device with any universal DMX controller All DMX controlled devices need a digital start address so that the correct device responds to the signals This digital start
9. address is the channel number from which the device starts to listen to the DMX controller The Same starting address can be used for a whole group of devices or an individual address can be set for every device Use the table below to define the correct address The table shows the settings for units 1 to 3 Apply the same principle for the other units Start addresses Channel mode Highest start First unit Second unit Third unit angles 3 Start address 1 4 1 3 7 4 3 510 Channel 1 3 4 6 7 9 5 Start address 1 6 1 5 11 6 5 508 Channel 1 5 6 10 11 15 V 03 27 01 2014 5 Velleman nv LX109 7 Start address 1 8 1 7 15 8 7 506 Channel 1 7 8 14 15 21 48 Start address 1 49 1 48 97 49 48 465 Channel 1 48 49 96 97 144 e When all devices have the same address all the units will listen to the control signal on one particular channel In other words changing the settings of one channel will affect all devices simultaneously If you set individual addresses each device will listen to a separate channel number Changing the settings of one channel will only affect the device in question To set the device to work with a DMX controller 1 Press lt MENU gt until lt DMX Channel gt is displayed and press lt ENTER gt 2 Use lt UP gt lt DOWN gt to select the appropriate channel DMX mode and press lt ENTER gt 3 Press lt MENU gt until lt DMX Address gt is displayed and
10. chase and delivery Not covered by warranty all direct or indirect damage caused after delivery to the article e g by oxidation shocks falls dust dirt humidity and by the article as well as its contents e g data loss compensation for loss of profits consumable goods parts or accessories that are subject to an aging process during normal use such as batteries rechargeable non rechargeable built in or replaceable lamps rubber parts drive belts unlimited list flaws resulting from fire water damage lightning accident natural disaster etc flaws caused deliberately negligently or resulting from improper handling negligent maintenance abusive use or use contrary to the manufacturer s instructions damage caused by a commercial professional or collective use of the article the warranty validity will be reduced to six 6 months when the article is used professionally damage resulting from an inappropriate packing and shipping of the article all damage caused by modification repair or alteration performed by a third party without written permission by Velleman Articles to be repaired must be delivered to your Velleman dealer solidly packed preferably the original packaging and be completed with the original receipt of purchase and a clear flaw description e Hint In order to save on cost and time please reread the manual and check if the flaw is caused by obvi
11. ket and tighten the bracket screws e Make sure there is no flammable material within a 0 5 m radius of the device e Have a qualified electrician carry out the electric connection e Connect the device to the mains with the power plug All devices must be powered directly off a grounded switched circuit and cannot be run off a rheostat or dimmer circuit even if the rheostat or dimmer channel is used solely for 0 to 100 switching The LX109 has a power output to supply power to another LX109 When connecting several LX109s ina daisy chain via this output make sure that the total current does not exceed the power line s nominal current Use power cables with an adequate section e The installation has to be approved by an expert before the device is taken into service DMX 512 Connection e When applicable connect an XLR cable to the female XLR output of a controller not incl and the other side to the male XLR input of the LX109 Multiple LX109s can be linked through serial linking The linking cable should be a dual core screened cable with XLR input and output connectors e Maximum recommended serial data link distance is 500 meters 1640 ft Maximum recommended number of devices on a serial data link is 32 devices A DMX terminator is recommended for installations where the DMX cable has to run a long distance or is an electrically noisy environment e g discos The terminator prevents corruption of the digital control
12. oe Familiarise yourself with the functions of the device before actually using it Do not allow operation by unqualified people Any damage that may occur will most probably be due to unprofessional use of the device e All modifications of the device are forbidden for safety reasons Damage caused by user modifications to the device is not covered by the warranty V 03 27 01 2014 2 Velleman nv LX109 e Only use the device for its intended purpose All other uses may lead to short circuits burns electroshocks lamp explosion crash etc Using the device an unauthorised way will void the warranty e Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems e Mechanical wear and LEDs are not covered by warranty qualified technician should install and service this device e Do not switch the device on immediately after it has been exposed to changes in temperature Protect the device against damage by leaving it switched off until it has reached room temperature e This device is designed for professional use on stage in discos theatres etc The device should only be used indoors with an alternating current of 100 to 240 VAC 50 60 Hz This device is designed for professional use on stage discos theatres etc The LX109 should only be used indoors e Lighting effects are not designed f
13. or permanent operation regular operation breaks will prolong their lives e There may be some smoke or a particular smell when the device is activated for the first time This is normal and any smoke or smell will gradually disappear e Use the original packaging if the device is to be transported e Keep this manual for future reference 4 Features e high power tri colour LED panel for eye candy effects wash light or blinder effect Kling Net supported to allow auto configuration over Ethernet e each LED controllable for pixel mapping e DMX controlled via 3 5 7 or 48 channels e built in automatic programs via master slave or DMX with variable speed e 2x 8 digit LCD display for easy menu setting e COB LED for superior RGB colour mixing e additional power output e bracket for multiple unit connection to create a wall e heavy duty bracket for truss rigging e equipped with Neutrik powerCON in out 5 Overview display and buttons bracket fuse DMX in out 2 x PowerCon in out 6 About the Kling Net protocol ArKaos has designed the Kling Net protocol to allow the distribution of real time video data to remote display devices such as LEDs or LED panels over Ethernet Kling Net allows auto configuration of display devices using etherCON RJ 45 Ethernet connection The LX150 works best with the Arkaos Mediamaster Pro software and its Video Mapper extension Mac and Windows V 03 27 01
14. ous causes prior to presenting the article for repair Note that returning a non defective article can also involve handling costs e Repairs occurring after warranty expiration are subject to shipping costs e The above conditions are without prejudice to all commercial warranties The above enumeration is subject to modification according to the article see article s manual Made in PRC Imported by Velleman nv Legen Heirweg 33 9890 Gavere Belgium www velleman eu
15. pyright holder V 03 27 01 2014 8 Velleman nv Velleman Service and Quality Warranty Since its foundation in 1972 Velleman acquired extensive experience in the electronics world and currently distributes its products in over 85 countries All our products fulfil strict quality requirements and legal stipulations in the EU In order to ensure the quality our products regularly go through an extra quality check both by an internal quality department and by Specialized external organisations If all precautionary measures notwithstanding problems should occur please make appeal to our warranty see guarantee conditions General Warranty Conditions Concerning Consumer Products for EU All consumer products are subject to 24 month warranty on production flaws and defective material as from the original date of purchase e Velleman can decide to replace an article with an equivalent article or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible or if the expenses are out of proportion You will be delivered a replacing article or a refund at the value of 100 of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery or a replacing article at 50 of the purchase price or a refund at the value of 50 of the retail value in case of a flaw occurred in the second year after the date of pur
Download Pdf Manuals
Related Search