Home

Central Management System User`s Manual

1. NOTE If the entered Username and Password is a user account A instead of an administrator account the same DVR account restriction will be applied When a user account accessed a function that is restricted the following message will be shown 25 26 User s Manual If the DDNS information of the DVR is known the DDNS data can be used to setup a site Check the box lt D DNS gt circled below and type in the DDNS data Click lt OK gt to complete the setting An example of the DDNS address looks like ddns specoddns net Settings Groups Site Setting Sa E oe Site New Site o Grou ps IP HEEE ddos specoddns net a 01 New Group 01 New Site Pore Username Password 9 DVR Model Stream Type Import Save and Connect NOTE Port number does not apply to DDNS entries Therefore if the A lt D DNS gt box had been checked the port number does not need to be changed User s Manual 5 2 4 Setup the SIP Camera Site Manually lf a SIP Camera is going to be added to CMS the required information includes the IP address port username password and streaming type of the SIP Camera Enter the data and select IP Cam as circled below Then choose the lt Model gt and lt Stream Type gt of the SIP Camera Click lt OK gt to complete the setting Settings Groups File path Event CMS User Sequence Login Setting Network
2. Groups File path Event CMS User Sequence Login Setting Network Log Groups Site Setting Guage w GF ste a Groups IP a 01 New Group 01 New Site Pore Username Password DYR Model Stream Type To export the configuration click lt Export gt and select a directory to save the zip file To import a previous saved configuration click lt Import gt and find the zip file that was previously saved NOTE After a setting is imported and saved the imported setting will be loaded immediately and the CMS will reconnect to the sites in the live group User s Manual 6 Operation of the CMS There can be at most 2 CMS instances opened simultaneously If the PC is connected to two monitors then the PC can open up to 2 CMS instances at the same time on the 2 monitors respectively However the processor and RAM of the PC will limit the number of CMS instances as well Note that all monitors have to be set to the same resolution The CMS supports high resolution 2048x1536 CMS multiple instances limitation according to the PC Single Core and RAM 2 512MB Open 1 CMS Frequency lt 2 0GHz NOTE It is recommended to keep the connected channels within 512 channels if multiple CMS instances are opened Network Connection Detection CMS will auto detect network connection status
3. lt OFF gt Select this to switch off the schedule record function lt NORMAL AND EVENT gt Schedule to record both the normal and event videos within the selected time frame lt EVENT ONLY gt Schedule to record only the event videos within the selected time frame 19 80 User s Manual The scroll down menu circled below shows the schedule options S 01 New Site a Schedule Record Setting chi Schedule Record Function ch2 Site 1 RECORD BY SITE Cch3 SELECT CELL E ch4 CLEAR CELL chs SELECT ALL CELL Che CLEAR ALL CELL ch che cho chio chil chi2 chi3 chi4 chis m Plas Holiday Setup 2009 8 5 Add f Select All Clear al lt Select Cell gt Choose this to select any cell from the table lt Clear Cell gt Choose this to clear any cell from the table lt Select All Cell gt Choose this to select all cells from the table lt Clear All Cell gt Choose this to clear all cells from the table The lt Select All gt and lt Clear All gt buttons are for setting all sites to always record or always not record by one click Follow steps below for an example of setting schedule record for the CMS User s Manual Schedule Recording Times Step 1 Select a site or a channel from the box on the right by a single click When a site is selected the same setting of schedule record will be applied to all channel
4. SITE TREE MODE OPTION FULL SCREEN 103 User s Manual Slider Bar Click and drag the bar to search through the video Y Slider Bar Playback Speed Indicator A Playback Speed Indicator The Speed Indicator shows playback speed in forward or backward direction gt indicates forward playback while lt indicates backward playback e The playback speed can be 1 2 4 8 16 or 32 About Click on the About Menu Bar as shown below to view 17904 M gt iayer zz the information of the CMS Player version as shown CMSPlayer Version 1 5 0 CMs on the right Copyright C 2008 Ea CMSPlayer_1 FILE PLAYER CONTROL SYSTEM SETTING VIEW a re ir File Path Setting The lt File Path Setting gt under the System E CMSPlayer_1 Setting Menu Bar as shown on the right FALE PLAYER CONTROL allows the user to preset file paths for AVI AUDIO ON OFF VIEW SETTING conversion files and snapshot files The File Path Setting window is as below E FILE PATH SETTING FILE PATH AYI Convert path C Program Files CPS avi Snapshot path C Program Files CM 5 Snapshot SnapShot Type Emp v Jpg Click on lt Browse gt to select desired folders In addition file type of snapshot pictures can also be selected Bmp Jpg Gif or Tif formats After the settings are selected click on lt Save gt to save 104 User s Manual Toolbar Under the View Menu Bar users can choose to show hide the
5. Step B The loaded emaps will be listed here Step C Type the name of the location and click on lt Search gt If Google map is able to find the target location it will be shown at the center of Google map The display size of Google map will not be changed Step D Click on the directional icons to move Google map to preferred directions Click on the center icon to return to the last view Step E Click on to magnify shrink the display size of Google map Alternatively drag the slider bar to select preferred display size Step F Select preferred type of Google map Hybrid is the mixture of pure map and Satellite map User s Manua Step G Click and drag the emaps from the site tree to the target locations A balloon with a letter will be displayed to mark the location of each emap Users can always click and drag balloons to change their locations Right click on any balloon and select lt Remove this map gt to delete the mark N NOTE Double click on any balloon and the emap will be displayed Alternatively the emap can also be restored via double clicking on the emap icon listed in the site tree 89 User s Manual 6 17 Health Function This is a function that verifies the HDD status of the DVR sites in current connected group Click on the lt Health gt icon and a progress bar will be shown to indicate that the information is being retrieving The following figure is an example Note that since SIP ca
6. buttons the other way is to right click on the group and select lt Expand gt or lt Hide gt from the pull down menu Settings Groups File path CM5 User Login Setting Groups Site Setting os amp amp Site Groups IP gt o MUMS ada a sit 01 New Site ey 02 New Group Remove 01 New Site Rename Expand IP Cam Hide Set as start group Remove a Group To remove a group click on the group to be removed and then click the Groups Site Setting a ee na a Groups IP Add a site 01 New Site a 02 New Group 01 New Site Rename Expand IP Cam Hide Set as start group 5 2 5 2 1 22 User s Manual Manage the Sites The following sections are instruction of the management of the sites including add or remove sites and configuration Add Remove a Site This section describes how to add or remove a site Up to 10 groups can be created with a capacity of 16 sites Add a site Choose a group to add a new site Click the E button to add a site to this group The next section will show how to setup the site step by step Settings Groups File path Event CMS User Sequence Login Setting Network Log Groups Site Setting sae as 2 Groups IP i o REE 01 New Site Remove Rename Expand Hide Set as start group The other way to a
7. speco technologies Central Management System User s Manual Version 2 12 User s Manual Table of Contents Mi OVE N ct ae ee ee ee coe ee eae eee hedaman eemintawnedsuaeudadedacues 3 1 1 System ReguiremMeNi xzecscsecacatassessassaecustdansvastonassteasaeastdanauasaseasasasssaanansanesduasoustes 4 2 Software Et Sek UE OU ss iree caches eta cnewes suchen co mectanesane sacs saeieanncnelcasssnsiecnravetesesreheseieesiwacassesact 5 ae Gade I i aa a eases staan E S 10 IN I ae conch cence c toceecnc hon cucacd nates ETEN EE NANE 10 E WON arcs siaeoutinsaaidussananganeessabsosecasdunsaesrginoseed E E E EEE 11 A CMS Main WINGOW sonses E aaan EE aa 12 4 1 CMS Icon in the System Tray eneszecacpeacion tec cacdcunecansedaaceancratencicnceepaneneacroncbensnadam 17 5 Configure the CMS csvcnesesevenreiacasermseserssacavecenaresesenncesnsenudesnsuensesesuaecsausenusawesenanenadenadedanes 18 I N a E E EE E E EE EN 19 S2 Monade Me SNOS eee ee eee REEE EE eren 22 aal AFO ea O err TEETE 22 5 2 2 Setup the DVR Site via Device Search o nonsensnnensnrerrrrsrrrrsrrrrrrrerrn 24 5 2 3 Setup the DVR Site Manually viccccscesscocacssecceccrsnecctcnsninctsscnicassncocesaandecetes 25 5 2 4 Setup the SIP Camera Site Manually cccccccccecceeceeeseeeseeeeeeenes 27 Tile IS rer EO E EEE E EET E 28 o AE EEEE rere te rene rarer ee ene ree Tre rere Toner 31 ie U E E EE EE E 35 NG EEEE EEEE E E EEEE T 39 A E SS E EE AEE E E E 40 lt e E
8. Data gt and allocate a folder containing DVR HDD files Step B Select lt Export Video gt Step C Select date of designated videos Today s date is in blue box the date with video data is highlighted in brown and the selected date is highlighted in blue Step D Click and drag the cursor to select designated videos Step E The start and end time of the selected video will be displayed here 97 User s Manual Step F Click on the lt Start gt button A window will pop up and users are allowed to enter a filename and select video type AVI or DRV through the window Then click on lt Save gt to start the exportation Delete Video Only when the current CMS login account is in the admin group will the video deletion function be available Refer to the following for step by step instructions x AM 08 45 00 _ Playback Video l Event List Export Video Open video File AM 08 56 23 Type Normal 9 910111271314 Motion by device 1516 17 18 19 20 21 _ w cm5 2 23 b5 26 17 298 Ll arm evie 2930 1273 4 4 q T mi G 40 44 47 p 1 i 6 f o 9 TU Z Why is the list not able to be displayed Step A Select lt CMS Data gt and choose CMS server amp group Note that DVR data does not support purge function Step B Select lt Purge gt Step C Select date of designated videos Today s date is in blue box the date with video data is hig
9. ET AE E EO A 42 SCT ET E A A 43 W Or I SG REEE EEEE 44 o OPET OTE ON E EEE E 45 6 1 View Live Image Assign Camera nseceeic ce nsercieredeusiuvedunicenedunsimcedesaomedantemedunniencss 46 6 2 Camera Setting Camera Info aussmcenresesreneaceeacereeuccamasneeexcntetnmanccuemennaen 49 Ne serion rRNR NEE 51 64 Z00mM IMOuUt Control via MOUSE ac ie detecsrecsracevedsbecavesedecevadevaceussebecerecsdecsnecedicrvecduc 53 oE E D E E E EE E OAE AE OAE OARE NOAE O A AEA A 54 e A glow alc S e E E E E EE EE 99 O7 PFiaypack Recorded VIGCG sc cicsscticiessiecciecnivssicsaiasceasacusctiaaivediacarusevaaninestsaariiedesas nn 56 6 8 Configure the OSD Menu of the Connected DVR ccccecceeeseeeeeeseeeeeeeeeees 66 a rrreec deere edie niene deere reducer demedeesinmaaiiagasunbiuastsaiiasnisaaaaainests 67 010 GMS Motion DotettO sespe n ai a E EE RRE E AR A 70 6 11 Missing Foreign Object SAIC isa sisecrssciesessazturesnesiaesrarsiunscersisncaseciaesesnsisndexidioads 72 a IR ek a E EE EE E ET 75 ee NMenM OF FUNCION ates ce ccceee coca cheeeenetyreenontiont netics eestherthenthes teetbreteonteerenratns 76 User s Manual 6 14 Dome Seting D me 0 ali vs Reamer ene etree nt eet ot emer nt tree arent Tenet sent ere Teer rem Tf 0 15 oChedule rer FUNCION essri siner nE EEEE R RETE ARNEE AEEA T 79 eA OW cdenrcnesesenanctesehcoctotssonenatenanensrsbctcastevesensnensscssiensucesteustensienanevercintent 84 og MEE oi i lad al U a meee reemreny teen nr ete
10. If CMS lost network connection the following error message will be displayed Disconnected fram network Live images will be automatically retrieved when network connection is restored When CMS detected the restore of network connection the error message will disappear Click on lt Stop gt to cancel this function 45 User s Manual View Live Image Assign Camera The user can view live video or connect to the connected DVR using the live button Click on the lt Live gt button to see the live view Connect Reconnect Disconnect the Sites lf the connection between the CMS and the Steal EE connected DVR has been interrupted users can reconnect to it by right clicking on the Site and Live select lt ReConnect gt from the pull down menu Berar users can also disconnect specific sites by Configuration selecting lt DisConnect gt from the pull down menu Event Search Playback Camera Setting Auto Detection of Disconnected Sites The CMS will automatically detect if Disconnection List of Client Devices any sites that are connected at the m DATE TIMEtLocal GROUP SITE 2010 06 24 11 37 44 01 New Group 01 MegaPixel beginning are disconnected for some reason later on in every 3 minutes A list will be shown as on the right when there are sites detected to be disconnected The list can be saved as a TXT file by clicking on lt SAVE gt at bottom left Check the box to disable pop up of the
11. Instant Record Function While videos are usually recorded to the connected DVR users can choose to instantly record live and playback video clips to the local computer as an option Right click on the Site and select lt Start Peconic Recording gt to start recording and DisConnect lt Stop Recording gt to stop recording Live PStart Recording Configuration Event Search recording site is more than 1 day a Playback If time difference between CMS and the message will be displayed as below Camera Setting ey Time difference between ste 01 and CMS is more than one day Do you want to continue When the channels are being recorded the title of the channels will show a capital letter R B at the end The recorded files will be saved to the default folder CMS Record lf users want to switch between Live Playback modes while CMS is recording videos the recoding has to be terminated A message dialog will be displayed for confirmation AN NOTE For the case of switching from Live mode to Playback mode the recording will be resumed from stopping point once Playback mode is ended and returns to Live mode AN NOTE If the connection to the recording site is disturbed and then reconnected the recording will be terminated without resumption User s Manual 6 14 Dome Setting Dome Control The users can also set control the dome camera in the CMS Right click on the chann
12. T ES eee fetes Clear Pi ot fae mt g s a aa e eo PARA tt ie e Start Simulation User s Manual Refer to the following for description of motion detection settings Sensitivity Setup a desired sensitivity level Enable Function Check on it to start monitor motion detection Motion recording Check on it and CMS will record event video when motion is detected The length of event video will follow lt Event Recording Duration gt specified in Event setting Show Motion Detection Region Check on it to display the detection area visually on the monitoring screen The boxes will also be captured and displayed on the snapshot images Start Simulation Click on it to start simulating motion detection The button will then change to Stop Simulation button When motion is detected red boxes will be displayed to mark the motion areas Stop Simulation Click on it to stop simulation Click on lt OK gt to apply the settings or click on lt Cancel gt to disregard and return to Live mode NOTE When motion alert is triggered an alert icon E will be displayed at bottom left of the grid 71 User s Manual 6 11 Missing Foreign Object Search The purpose of Missing Foreign Object Detection function is for users to keep an eye on the important objects and areas Right click on a preferred grid and select lt Intelligent Surveillance gt gt lt Missin
13. The other way to display the View Setting al CMSPlayer_1 window is by clicking on the System Setting FILE PLAYER CONTROL Menu Bar as shown on the right Full Screen Click on the lt Full Screen gt icon to change to full screen displaying mode Alternatively click on the View Menu Bar or and select lt Full Normal Screen gt as shown below Ea CMSPlayer_1 FILE PLAYER CONTROL SYSTEM SETTING w TOOLBAR SITE TREE MODE OPTION FULL SCREEN In full screen mode the full screen icon will change to E Click on it to return to normal screen Alternatively press Esc button on the keyboard 101 Fast Step Backward Click on to play the video fast backward The other way to play the video fast backward is by clicking on the Player Control Menu Bar as shown on the right When the playback of the video is paused click on this icon to move one step backward Play Click on gt to play the video The other way to play the video is by clicking on the Player Control Menu Bar as shown on the right Pause Click on go to pause the video The other way to pause the video is by clicking on the Player Control Menu Bar as shown on the right Fast Forward Step Forward Click on gt to play the video fast forward The other way to play the video fast forward is by clicking on the Player Control Menu Bar as shown on the right When the playback of the video is paused users can click on this button t
14. Lite Codec Pack Select Components Which components should be installed Select the components you want to install clear the components you do not want to Install Click Hest when you are ready to continue Other audio formats fidshow AMA IMA ADPCM ODMZ MACE IMC MS GSM Trespeech True Audio Nellyrnoser Mu law A ba MS ADPCM E DirectShow audio parsers Current selection requires at least 37 9 MB of disk space 2 Check lt Microsoft gt for lt AVI splitter gt under lt DirectShow source filters gt i Setup K Lite Codec Pack Ama Select Components Which components should be installed Select the components you want to install clear the components you do not want to Install Click Hest when you are ready to continue B DirectShow source filters AM splitter Microsoft MP4 splitter Haali Gabest Current selection requires at least 37 5 MB of disk space 65 6 8 66 User s Manual Configure the OSD Menu of the Connected DVR The OSD menu of the connected DVR contains a list of items that are used to configure the connected DVR Right click on a DVR and select lt Configuration gt to open the OSD menu When the mouse did not click or the keyboard did not type for 5 minutes the configuration window will be closed automatically Ee Connect DisConnect Live Record Event Search Playback Camera Setting The OSD menus for the DVRs ar
15. Log Groups Site Setting eg i at Site New Site Groups IP 192 168 7 a 01 New Group 01 New Site I DIDNS Fort a0 Username admin Password sek DVR EP can Model SIP Stream Type HTTP STREAM x AN NOTE Each group can only connect to at most 16 SIP cameras 21 User s Manual 5 3 Setup the File Path The file path menu defines stored destination of snapshot archive files and recorded videos It is recommended to use the default folders Settings Path Circular Snapshot path TE C Program Files cMmsiSnapshot Enable ON Type By size Archive path C Program Files Ch S 4rchive Threshold 1000 MB Record path Data life time Ci Program Files CMS Record Elor 1 Snapshot hype Bmp Record Path The recorded videos can be stored in more than one folder Click on lt Advance gt and the following window will be shown Record Path a pes Clear All CiProgram Files cMsS Record Enable Browse Clear 28 User s Manual The number of selectable folders equals to the number of HDDs the PC connects to excluding HDDs with capacity less than 1GB Check the Enable box and click lt Browse gt to set more destination folders Each folder should be from different HDD or an error message will be displayed Note that if a HDD with less than 1GB capacity is selected an error m
16. Player will be displayed Click on the lt Open Video File gt icon as marked below Alternatively scroll down the lt FILE gt menu and select lt OPEN VIDEO FILE gt FILE PLAYER CONTROL SYSTEM SETTING VIEW ABOUT ra Ko gm OPEN SNAPSHOT SETTING FULL 61 62 User s Manual The Playback Search window will be displayed as below The following Step A Step B Step C Step D Step E Step F steps will guide users to playback designated videos Data Time Start Time c Bo Playback video Event List Export Video G Open Video File End Tiris Purge Type Normal Motion by device Motion by CMS Alarm by device Why is the list not able to be displayed select lt CMS Data gt and choose CMS server amp group Alternatively select lt DVR Data gt and allocate a folder containing DVR HDD files Select lt Playback Video gt Select date of designated videos Today s date is in blue box the date with video data is highlighted in brown and the selected date is highlighted in blue For playback of CMS Data select sites Click on lt gt to select or deselect all sites The selected site will change to gray color For playback of DVR Data there is no need to select sites since it s just the DVR itself Scroll the slider bar to zoom in out the displaying time Point the cursor at designated time and double click to start playback
17. Seleck channel Selected time Start Time 2009 07 28 12 47 26 End Time AN NOTE The Select time and slider bar will show the stop time from last playback if playback of video is previously accessed 57 User s Manual Save the drv files to the local computer Follow steps below to save the video to the local computer Step 1 First select lt Archive gt in Function area Then Selected channel area will be available for users to choose desired channels Valid time Site 01 New Site 192 168 6 1145 Stark 2009 07 26 12 47 26 End 2009 08 05 11 53 37 Select channel Selected time Start Time Select All ee 2009 07 28 Clear All p 12 47 26 End Time 2009 08 05 11 53 37 Function C Playback Archive C Export Local Step 2 Specify the Start Time in Selected time area and click lt set start gt in Function area Then specify the End Time and click lt set end gt Alternatively use the slider bar to select start time and end time Click lt OK gt and specify the filename of the DRV file Then CMS will start to download the video data Close the lt Archive gt window to exit The default archive path is CMS Archive hive SITE 1 FROM 2009122 01 07 01 TO Now 2009222 01 09 10 58 User s Manual Export video data at the connected DVR site TL models with software version 2125 or newer ca
18. Select from page number Note that details of lt Layout file gt are explained in section View Live Image Assign Camera 51 52 User s Manual Select from preview dialog Choose this option and the picture as below will be shown When the mouse pointed to any item the preview display will be shown on the right Double click on any item to display it on the viewing area Select from page number Choose this option and the picture as on the right will be shown Select any page number to display the chosen page on the viewing area Since the maximum channel connection is 512ch the choices of page number for 2 2 will be from 1 to 128 A control icon lt X gt is provided to exit without selection User s Manual 6 4 Zoom In Out Control via Mouse Both in CMS and CMS Player zoom in out can be easily control via mouse scroll wheel Either in CMS or CMS Player click on any grid that users wish to zoom in viewing area Move the scroll wheel away from users to zoom in and the screen will show like the following picture On the upper left hand corner will show zoom in multiple The maximum multiple is X7 Also on the lower right hand corner will show the position of current viewing area shown as an inner white rectangle comparing with the original screen shown as an outer rectangle frame In addition the viewing area can be dragged and moved by left clicking and holding the mouse while moving On a zoomed i
19. The selections include 4 window 9 window 16 window 25 window 36 window 49 window and 64 window modes Refer to section Display Mode for more details on operation Click to start displaying the sequence list See section Sequence for more detailed information Click to extend the current viewing grids to full screen Hit lt Esc gt to exit User s Manual HDD Info The pie chart on the bottom left displays the HDD on System information This is especially useful when the user uses the CMS to record the video to the local computer Scroll down the menu and users can see all the HDD drives installed on the local computer such as C drive D drive etc The blue part of the pie chart indicates the used space and the yellow part indicates the available space The information will be updated every 30 seconds If file circular is enabled the circulation will as well be updated every 30 seconds LIVE Click on this button to view the live video Note that after viewing recorded video click this button to switch back to the live mode PLAY Click to view recorded video stored in the HDD of the connected DVR Please refer to section Playback Recorded Video for more information about playing back the video PLAYER Click to open the CMS Player The CMS Player is a compact version of the standard DVR Player Please refer to the Appendix A for more information AN NOTE When CMS is terminated CMS Player w
20. When an alert is triggered while the alert function is w Minimize To Traw enabled CMS icon shown in the system tray will Open CMS change to Alert icon to indicate that an alert is being a triggered Right click on CMS icon and choose lt Alert Info gt to show the Alert Info window Alternatively double click on the blinking CMS icon can also display the Alert Info window Users can click on the lt Save gt button to save the alert information list DATE TIME DVR SITE NAME UNIT NAME CH STATE NOTE The maximum number of items can be kept on the alert list are 1 000 When the list reached 1 000 items the earliest alert messages will be deleted while the new ones are being saved Double click on the Event Messages Alarm Motion or Video Loss to view the event video in full screen If the DVR sending the Event Messages is not currently connected to the CMS a message box will be displayed Connect the DVR and the event video will be available Icons of alert types as listed below will be displayed at bottom left of the grid A NOTE The Alert function works ONLY within LAN network Please refer to the note of the Search function NOTE If the alert event has not yet been added to the database of the DVR a warning message will be shown to notify the user User s Manual 5 5 CMS User The lt CMS User gt is for the management of login accounts in the CMS Users can setup information and p
21. a channel grid and press the following keys Ctrl Alt n Sound Notification ON for all sites Ctrl Alt f Sound Notification OFF for all sites 2 Click a site in the Site Tree and press the following keys Ctrl Alt n Sound Notification ON for the selected sites Ctrl Alt f Sound Notification OFF for the selected sites View Camera Info The Camera Info can be viewed both in CMS and CMS Player Right click on any channel grid and select lt Camera Info gt from the pull down menu to view the information Refer to the following for examples Camera Info of CMS Camera Info of CMS Player Camera Info Camera Info Site Mame New Site Device Channel Mame CHi IF 192 1658 6 153 Frame Rate E video Size 352 x 240 Format H 264 Format H 264 Device DYR Stream Type HTTP STREAM Frame Rate Video Size 720 x 288 Close User s Manual 6 3 Display Mode The available display modes are single channel 2X2 3X3 4X4 5X5 6X6 TXT and 8X8 There are two arrow buttons at the left and right hand sides of the screen as shown below Click on the left arrow button to display images of the previous page On the other hand click on the right arrow button to display images of the next page To view in multiple window mode right click on the desired icon and a menu will be display as on the right The selections are described as the following Layout file Select from preview dialog
22. exe the installation NOTE Some antivirus software might report false A alarm when users move the mouse cursors over the CMS _ Setup exe file Right click and select lt Always ignore gt in order to continue the installation Guard O A virus or unwanted program was found Please select the action s to be perfomed Detection Detection ITRDropperGen Move to quarantine Ignore Delete Move to quarantine Rename Always ignore Virus information Option 2 If CMS will be installed via a CD the installation will startup automatically when the CD is inserted into the CD Rom The lt CMS Setup Menu gt window will be displayed Choose lt INSTALL CMS gt to start installing CMS Choose lt CMS USER S MANUAL gt to open the user s manual Choose lt EXIT gt to exit the lt CMS Setup Menu gt NOTE If an older version of the CMS had been installed in the local computer a message box will be shown during the installation Click lt OK gt to uninstall the previous version User s Manual After clicking lt OK gt an lt CMS Installation Uninstall Confirmation gt dialog will be displayed Click lt Uninstall gt to uninstall the older version and continue with the next step This wizard will uninstall CMS Installation From your computer Click Uninstall Ay to start the uninstallation F Uninstalling From C Program Files Ch5 Cancel Step 1 Select the components
23. for the first time select a desired language for the interface The available languages are listed in the scroll box Click lt OK gt to confirm the selection English If the system memory or CPU frequency is less than the requirement the error message shown as below will be displayed A system memory insufficient Ad CPU frequency insufficient User s Manual 3 2 Login The default User Name amp Password are listed below User Name admin Password 1234 Lei User Mame bdmin SEE EE ets cta cta EE ota ct ita cta cta ota HE Password Save user name and password ok Check lt Save user name and password gt to save time from entering username and password every time the CMS starts Click lt OK gt to login The username and password accounts can be added or removed under the lt CMS User gt tab in lt Setting gt configuration window Refer to the CMS User section for more information NOTE If the wrong username or password is entered for 3 times the A message below will be shown and the CMS will be closed automatically after lt OK gt is clicked Reopen the CMS to enter the correct username and password A Password mismatched 3 times Program will be closed automatically User s Manual CMS Main Window After starting the CMS the main window of the CMS will be shown as the figure below The name of each button is indicated as follows 6 7 8 9 10 11 12 13 14 a Sie
24. proxy server for your CMS connection Then enter the IP address and port of the proxy server Enter username and password if authentication is required NOTE The CMS supports the most common authentication keys Digest and Basic The authentication will be automatically detected and performed Check the box Bypass proxy for local address to disable connection via the proxy server for local LAN network The lt Advance gt button allows the user to Exceptions edit an exception list where addresses in Do not use proxy server for addresses beginning with the list will not be connected via the proxy TT server The addresses can be subnets ne Refer to the picture on the right for an example of the exception list Sere Cancel A NOTE All functions of the proxy server are tested with the most common Squid Proxy Server Some other proxy servers may not work properly User s Manual 5 9 The step by step operation of the CMS will be recorded by the CMS log Log Data function Refer to the following picture for data kept in the log file Settings Groups File path Event Log File Time 010 09 16 13 19 51 2010 09 16 13 20 16 2010 09 16 15 31 28 2010 09 20 13 50 33 2010 09 20 14 11 30 2010 09 20 14 20 50 2010 09 20 15 37 45 2010 11 09 09 57 16 2010 11 09 10 48 03 2010 11 09 10 48 17 2010 11 09 11 04 40 2010 11 09 11 04 56 CMS User Sequence Login Setting Network Lo
25. s Manual 2 The CMS server takes up too many HDD space We have found that the preset of the virus scan software NOD32 will automatically create a temporary file under windows system temporary folder when the CMS connects to sites This temporary file will automatically increase the size which causes the HDD became lack of space Please go to the control center of the NOD32 and disable IMON Then the problem should be resolved The following pictures are examples TIMON iemel Ean ols Control Center Stas O O O O O22000 Number of files Scanned g Threat Protection Modules AMON DMON EMON od_eval update ver Cc ET EST ign 2277 0070518 ap Monitor IMON enabled ajaa Ad yoat DMA ariig O NOD32 System Tools er BAN 3 y X g x eon NOD 32 Help Hide Quit Help Hide antivirus system 108 User s Manual Have a question or comment We would love to hear from you Speco Technologies is committed to providing you with the highest quality most cost effective products and solutions for your audio and video installations For product related issues such as product availability pricing and order status contact us at sales specotech com For issues regarding this web site webmaster specotech com If you would like to contact our Technical Support Group by email techsupport specotech com or Call 1 800 645 5516 option 3 or 631 957 8700 option 3 For information call toll free at 1 800
26. shown in the system tray Right click on CMS icon Open CMS and the menu items will be as shown on the right Help lf lt Minimize To Tray gt is checked CMS window will shrink to CMS icon in the system tray when it is minimized The task button will also disappear To restore CMS window click on CMS icon and the task button will appear again Then click on the task button to maximize CMS window Alternatively right click on CMS icon and select lt Open CMS gt and CMS window will be restored Right click on CMS icon and select lt Help gt will display CMS User s Manual Details of lt Alert Info gt are explained in section Alert Events User s Manual Configure the CMS The CMS supports up to 10 groups and at most 16 IP devices can be added to each group The following sections guide users to setup the CMS step by step Click on the lt Setting gt icon and the figure below will be displayed Settings roves path Event ch use Seasence toon etna Network toa Groups Site Setting Guage w GF ste 3 Groups IP 3 01 New Group 01 New Site Pore Username Password DVR Model Stream Type Export Import i Cancel NOTE The configuration in Group tab and Import function will be A unable to be saved when the CMS is detecting network connection or is connecting to some sites Error messages will be shown to inform the users AN NOTE When t
27. the video User s Manual Step G Click on the lt Open Video File gt button to search for videos via file list Users can also convert DRV files to AVI files here Refer to the next page for instruction of conversion NOTE The recorded video of IP camera can only be played back by CMS player Some errors might occur if playing back with DVRPlayer Convert drv files to avi files Click on the lt Open Video File gt button in the Playback Search window then the Select a folder window will be displayed On the top center of this window select lt Convert To AVI gt and double click on the file which users wish to convert A Conversion List window will pop up and the file will be added to the list The other way to add files to the list is to right click on the file and select lt Add To List gt or lt Add All To List gt Folder Yiew Double Click to Choose DRY File Information Double Click to add the DRY file to convert list ICA Play DRY File Now Choose C Program Files CMS Archive sample G9 CMS Convert To AVI Prog CMS A sample 9 Archive amp sample 4 Avi DRY File Name Start Time End Time rape MEN amp EXE sample _CMSO1 Arc Group01 Si 2009 06 02 01 f Add To List 02 08 52 19 HELP sample_CMSO1_Arc_Group01_Si 2009 06 02 0i 02 08 53 18 Log Record Setting Setting Setting3 1 1F the duration of a DRY file is less than 3 seconds it will not be successfu
28. to apply the sound setting by selecting lt Sound Notification On Off gt from the pull down menu Note a message window will arise if sound file is not selected yet Camera Setting Snapshot view Setting 7 Show Site Name iw Show Channel Name Show Time Re sort Sound Notification Channel Base Remove Sound Notification On Oft Filename dive way Load Camera Info Camera covert On Off OK Cancel 2 i A Sancel Intelligent Surveillance Quick Hot Key Click a channel grid and press the following keys e Ctrl n Sound Notification ON e Ctrl f Sound Notification OFF NOTE The sound files selected will be saved in CMS folder Setting SoundNotification NOTE On the top left of the grid will show SN to indicate sound notification is turned on 49 50 User s Manual Setting via Site Base Select lt Site Base gt from the menu and check the option lt Sound Notification enabled for All Channel gt and or lt Same sound for all sites gt as needed Click lt Load gt to select a sound file Then click lt OK gt to save the setting The sites have the option lt Same sound for all sites gt checked will play the same sound and the latest set sound will be played Camera Setting View Setting J Show Site Mame 2 Show Channel Name F Show Time Sound Notification Site Base W Same sound for all sites Filename dive wary Cancel Quick Hot Key 1 Click
29. two options Auto Login and Auto retrieve Live image When Login will be checked at the same time Nonetheless it is still the user s choice to determine the favorite setting The following message will be shown when the CMS is auto opening after the system started up Click Cancel can terminate opening the CMS CMS Auto Open Click the second option Auto Login to automatically login when the CMS starts Remember to enter and verify username and password in box 1 Click the third option Auto retrieve Live image When Login to automatically connect to the sites in the start group when the CMS starts Detection of internet connection will be performed before hand and the following message will be displayed Click lt Stop gt to terminate the detection and AutoLive will not be initiated Detect Internet connect state before AutoLive 41 5 8 42 User s Manual Network Setting The CMS provides the option of connection via proxy server for Speco DVRs Click lt Network gt tab and the setting items are shown as the following Settings Groups File path Event CMS User Sequence Login Setting Network Log Prov Server Use a proxy server for your CMS connection Address 0 0 Proxy Authentication Username Password Bypass proxy for local address beat trot ponte eee eee lf users wish to create the connection via a proxy server check the box Use a
30. will interrupt video data exporting e When the DVR did not answer for more than 2 minutes the CMS will assume the connection is disrupted e When the available space is less than 10MB the exporting process will not be started When the size of the Event video data is larger than the capacity the accommodated number of events within the capacity will be calculated and the exporting process will begin e When the size of the Normal video data is larger than the available space the recordable length of video data will be calculated and the exporting process will continue When the exporting process is completed a message window will be shown to notify whether the exporting process is successful or failed NOTE The exporting process for different sites can be performed simultaneously User s Manual Playback video stored in the HDD of local computer lf users wish to playback videos that have already been saved to the local computer launch CMS Player AN NOTE CMS Player can only be started through CMS If users try to start up the CMSPlayer exe an error message will be displayed There are two ways to launch CMS RelLonnect Player One way is to click on the DisConnect lt CMS Player gt icon Alternatively T right click on a site in the site tree Resend and select lt Playback gt gt lt Local Configuration Playback gt Event Search Local playback Remote playback Camera Setting Then CMS
31. 645 5516 Our Address Speco Technologies 200 New Highway Amityville NY 11701 Phone 631 957 8700 Fax 631 957 9142 109
32. Both gt lt OFF gt The Alert Notification is turned off lt Event gt When the alarm is triggered the DVR will send an alert message to the CMS lt Alive gt The DVR will send an alive message to CMS every N second just to show that the connection between the DVR and CMS is in effect The time interval N can be adjusted in lt Alive Interval gt lt Both gt This enables the DVR to send both Event and Alive alert messages to the CMS Alert IP The Alert IP must match the IP address of the local computer In this example the IP address of the local computer is 192 168 7 122 Alert Port The Alert Port is the port used for sending and receiving alert signals Choose any port that is not restricted by the network The ports for both connected DVR and CMS Alert must be the same In this example the port is set to 9999 NOTE If 2 configuration sets are corresponding to 2 different CMS servers each CMS server must have its own unique port number Alive Interval Time interval 1 to 255 sec between each alive message can be set here User s Manual Step 3 Setup the Alert of the CMS Click on the lt Setting gt icon and go to Event tab to setup the port Port 9999 is used in this example Select lt ON gt to enable the alert function lt Event Full Screen gt is used to display full screen of the alerted channel Select lt ON gt to activate this function or lt OFF gt to deactivate it lt Event Recording Duration gt is
33. OADIMAGE ORIGINAL DOUBLE FILL Google map g 01 New Site thestore jpg of CH2 CH3 CH4 CHS fj CH6 CH7 CHS CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16 Right click on a camera icon can remove it or rotate its pointing direction including North Remove Northeast East Southeast South Southwest West and Northwest Rotate 85 86 User s Manual Step 6 When the mouse pointer moves over a camera icon in the image an information dialog box will be displayed as below picture marked 1 01 Mew Se me cH gre GROUP T Mew Ga SITE m fir Mew Site Che H IP 182 1606 109 PORT 0 GROUP 01 New Group SITE 01 New Site Ch CH2 IP 192 168 6 183 PORT 80 Double click on any camera will display the live preview image of the camera When a camera icon is clicked the camera live preview window will be highlighted if it s been displayed as above picture marked 2 Otherwise the corresponding channel in the site tree will be highlighted as shown above A NOTE The camera live preview window is limited up to three instances at the same time Step 7 Right click on the camera preview window to display the control menu as shown below The menu items includes Snapshot Dome Setting Dome Control Sound Notification On Off and Camera Info User s Manual Camera Icons There are three different types of cam
34. Player The main window of the CMS Player is shown below with the name of the buttons 123456 7 IZE MS Play L E g ALE LAY CONTROL SYSTEM SETTING VIE ABOUT a ag Eg oc Wo Site Connection a10 11 12 Open Video Fie 5 FastStep Backward 9 Audio SS 2 Snapshot 6 Play Pause 10 Display Modes 3 Frame View Seting 7 FastStep Forward 11 SliderBar Ca Ful Screen 8 SiteTree 12 Playback Speed Indicator The usage and function of each button will be described in the following paragraphs 96 User s Manual Open Video File Click on the lt Open Video File gt icon to display the Playback E CMSPlayer_1 PLAYER CONTROL Search window Alternatively click on the File Menu Bar as shown on the right Users are allowed to playback export or delete videos The instruction of video playback is illustrated in section Playback Recorded Video The followings will be details about video exportation and deletion OPEN VIDEO FILE EXIT Export Video DVR Data Start Time AM 08 47 23 Playback video End Tine AM 08 54 35 MTWTFS ivp e ee Nearmal f a ja h j Fe f F Motion by device 15 16 17 18 19 20 21 _ _ Paon ay c 22 23 GPS 26 27 28 a 4930 1 2 3 4 5 6 7 8 91011 12 Why is the list not able bo be displayed Step A Select lt CMS Data gt and choose CMS server amp group Alternatively select lt DVR
35. Ties a Display Modes 10 Ema ee h a ei _ Tole Smooth PLAY 18 HEALTH betie PLAYER na LOCK o snapsHoT The usage and function of each button will be briefly described as follows User s Manual Site Tree Displays the site s that users are currently Semone viewing If the connection to a certain camera is failed there will not be image displayed on its Live assigned grid Right click on the site and click E aA lt ReConnect gt to try to establish the connection Configuration to the site The lt DisConnect gt option allows the Event Search user to only disconnect a certain site Playback Camera Setting The user can also rename the camera directly by right clicking on the camera and selecting REDE ESSE Rename lt Rename gt The new name will be shown on the upper left corner of the camera s assigned grid Note that group and site cannot be renamed at the site tree By right clicking on the group icon the options l Expand Tree shown as on the right allows the user to expand Hide Tree or hide the site tree Bandwidth Normal Dual Streaming For different networks with different bandwidths two streaming options are provided normal streaming and dual streaming Users who are using high speed networks normal streaming will be a recommended choice Depending on the HDD capacity and network usage set to high middle or low bandwidths For networks with limited
36. Toolbar When users closed the Site Tree or Mode Option users can recall the window under this menu too Ea CMSPlayer_1 FILE PLAYER CONTROL SYSTEM SETTING TOOLBAR SITE TREE MODE OPTION FULL SCREEN Assign a Channel to Certain Grid Similar to CMS CMS Player also allows users to assign any channel in the site tree to any grid of CMS Player main window Follow steps below to complete assignment Step 1 Click and hold the channel users want Step 2 Drag and drop it onto the window that users want to assign in Resort Remove Displaying Grid Right click on any channel and select lt Re sort gt to Image Adjustment restore the original layout Camera Info Missing Foreign Object Detection In addition users can also remove any channel by right clicking on the grid and select lt Remove gt Alternatively ous users can select any grid and press lt Delete gt key on the keyboard to remove the channel A NOTE Selecting lt Re sort gt will restore the removed channels or users can add a channel back to any grid via drag and drop Image Adjustment Image Adjustment Image adjustment function in CMS Player is the same as Camera Info in CMS Please refer to section Adjust the Image for Missing Foreign Object Detection more details Re sort Remove Camera Info Camera Info function in CMS Player is the same as in CMS Please refer to section Camera Setting Camera Info for more details 105 Use
37. Zone gt to setup time zone To find out the local time zone please visit www greenwichmeantime com AN NOTE The lt Time Zone gt must be set or the lt Network Time Protocol Setup gt will not be accessible After entered the local time zone the lt Network Time Protocol Setup gt option will be accessible Go to lt Main Menu gt gt lt System Setup gt gt lt Date Time gt gt lt Network Time Protocol Setup gt and the following menu will be displayed Network Time Protocol Setup 1 NTP Server time nist gov 2 Automatically Time Sync ON 3 Manually Time Sync No In this example the NTP server should be set to 192 168 7 122 which is the IP address of the local computer After the NTP server is set select lt Manually Time Sync gt to sync the time with the local computer The time sync can also be updated periodically Select ON for lt Automatically Time Sync gt and the time will be automatically synced once an hour 3 1 User s Manual Start the CMS There are 3 ways to start the CMS Note that method A and B are only available if the Start Menu Shortcuts component is installed Please see section Software Installation for more information Method A Click Start menu and select Programs find CMS from the listed programs Method B Double click on the shortcut icon on the desktop Method C Go to CMS EXE and double click on the CMS icon Starting Up If the CMS is started
38. apply settings in the configuration section Start Simulation Click on it to start simulating object detection The button will then change to Stop Simulation button When the image is different green boxes will be displayed to mark the lost of objects Stop Simulation Click on it to stop simulation Live Click on it to restore the Video Preview frame to live image 73 74 User s Manual Lost of Object Alerts When lost of object alerts are detected restore the object detected search window and the list on the left hand side will show area number and time of the lost of object alerts If the connected site is a DVR double click on any item to playback video that is 15 seconds before the alert triggered However if the video is not added to the database yet an error message will be displayed NOTE Only the configuration of area positions sensitivity and interval A will be permanently saved The default image will be replaced by the initial image every time when CMS restarts Therefore please check the configuration every time CMS starts up NOTE CMS Player also has Missing Foreign Object Detection function and it is slightly different from what s in CMS Refer to the appendix A for more details Click on lt OK gt to apply the settings or click on lt Cancel gt to disregard and return to Live mode The selected boxes will not be shown on the live monitoring screen AN NOTE The Motion Detection function a
39. bandwidth dual streaming will be a better choice It enables coexistence of high quality streaming at local DVR site and lower quality streaming but faster transmission for CMS site To select dual streaming click on the bandwidth icon and the icon will change color Then users can furthermore choose different bit rates to adjust for the best displaying quality The setting will be applied immediately and is going to be saved for CMS next startup User s Manual A NOTE Dual streaming will only be available when DVR s total PPS is set to one half of the max PPS for example set 30PPS for D1 recording The reserved half of the max PPS will be handling the low rate streaming for transmission to the remote monitoring site Audio Click on the audio button to switch on off the audio AN NOTE Switching ON OFF the audio on CMS will not affect the audio setting of the connected DVR s Smooth Adjustment Click on the smooth adjustment button to switch on off the smooth adjustment function Switching on the function helps to give the image more sharpness Deflicker Click on the deflicker button to turn on off the deflicker function Switching on the function helps to avoid gleaming of images Record Click on the recording button to start recording videos of all connected sites The recorded data will be stored in the preset file path specified in settings Display Modes Click any of them to view the image in a multiple window mode
40. cation Each camera can be set to enable disable Live Play or Record function individually after clicked on lt Advance Setting gt Refer to the following figure for details Attribution Setup CMS Group Attribution Select CMS Group NewGroup01 Function List Per Site Per Camera Advance Setting Cancel Camera Attribution Setting Select Connect Group 01 New Group Enable Video Camera Enable cameras per each site will not be detected NOTE These settings will affect the whole operation of the CMS Please be very careful while configuring the settings Next time when users login users can choose to enter the CMS either as the admin or the user User s Manual 5 6 Sequence This function is used to set the displaying Add ta Sequence sequence Before starting sequence display L i P liie Ill wt LIE TLL users need to add channels to the sequence Rename list Right click on any channel and select lt Add to Sequence gt to add or lt Remove from Sequence gt to remove Note that when the channel is added to the sequence a capital S will be shown on the icon After the channels are added to the sequence click on the lt Setting gt icon and choose lt Sequence gt to setup the sequence Under the lt Sequence Setup gt option users can setup the dwell time 1 to 120 seconds and split mode Gi 2 2 3 3 4 4 or 5 5 lt Sequence Order gt li
41. ccess the function of the trigger window Click on any grid to manually trigger the preset sound at the corresponding camera site The box next to Click to trigger will tell whether the trigger is susceess or fail The following shows the UI of an administrator s privilege Digital Deterrent Digital Deterrent Trigger C Setup Manual Trigger Click to trigger Success Advance None None 9 None None None None None None 31 None None None None None None None 9 None None None None None None None None None None None None 15 5 22 24 25 2 None 30 Sil 26 29 4 5 8 Cancel C Setup Click to trigger Advance None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None Click on the lt Advance gt button to manually trigger a selective sound at a selective camera site Select a channel and a sound and click lt Send gt to trigger Advance Channel Channel_t kd Sound sound_1 k 93 94 User s Manual Digital Deterrent Set Audio Click on lt Next gt button will display the set audio window This window is for the administrator account only The administrator is allowed to configure audio settings here Refer to the following for the display of set audio window Digital Deterrent Set Audio Record sound Play Load Save As Previo
42. day Setup 2009 8 6 Add Cancel Select All J Clear All User s Manual Select Clear Cell by Date Time Another way to select or clear time frame is by clicking on the Day or Time tabs For example when users click on lt Tuesday gt tab the color of all Tuesday cells will be changed and the site is scheduled to record normal and event videos every Tuesday When users click on 5 00 5 30 tab color of all 5 00 5 30 from Monday to Sunday will be changed Click on lt OK gt to save and exit Schedule Record window 01 New Site a Schedule Record Setting chi 7 Schedule Record Function Bc ie ee ETT Sect cau ch3 ch4 chs Ch ch che cho chio chil chiz2 chi3 chit chis H H ao ok Holiday Setup 2009 8 6 2 Days of Week Cancel Select All J Clear All Special Schedule of a Specific Date If users wish to setup a special schedule for a specific date simply select a date from the pull down menu of lt Holiday Setup gt and click on lt Add gt On the right of the lt Schedule Record gt window users will see a new day cell as shown in 3 Setup the schedule for that day and the schedule record will only run once for that special day 01 New Site a Schedule Record Setting chi Schedule Record Function Bc Stel RECORD BY SITE EET Sect cen Cancel Select All Clear A
43. dd a new site to a group is to right click on the group and select lt Add a site gt User s Manual Remove a site To remove a site click on the site that is to be removed and click the ie button directly to remove the site Settings Groups File path Event CMS User Sequence Login Setting Groups Site Setting a H a amp E E Site Mew Site a Groups IP oo 0 0 0 Eps 01 New Group an 3 01 New Site Rename ame ord DVR IP Cam Model Stream Type The other way to remove a site is to right click on the site and select lt Remove gt from the pull down menu A new site can either be a DVR or a SIP Camera and the number of sites equals to the number of DVRs and SIP Cameras The following sections will show how to setup configuration of the sites 23 User s Manual 5 2 2 Setup the DVR Site via Device Search There are two ways to setup a DVR site The simple way is via Device Search The CMS is able to search for the IP address of the DVR s connected to the LAN The ports used for device search are 6666 and 6667 Please make sure that these two ports are not in use nor blocked by firewall or virus scan software Follow steps below to search for DVR s Step 1 If there is a LAN network issira the CMS Can search the sod Evert _ e ELLES g She New tbe LAN network for IP address aces 01 New Group of available DVR s Click o TIER
44. disabled in sequence mode 1 Right click to see channel menu 2 Zoom In Out 3 Drag and drop channels or sites to the display grids 4 Remove any channel grids on the display windows AN NOTE If users enabled the lt Event Full Screen gt and an event is triggered while running the sequence the CMS will display event full screen The sequence will not resume until event full screen ends Click on the lt Sequence gt icon or the lt Live gt icon to exit the sequence mode User s Manual 6 6 Adjust the Image Both CMS and CMS player provide image adjustment function Double click on a channel then right click on it Select lt Image Adjustment gt from the pull down menu and the image adjustment window will be displayed Users can change the brightness saturation hue and contrast of the channel Snapshot Image Adjustment as The Following configurations are only applicable to the CMS display and have no effect on CMS recording data Re sort Brightness Remove Saturation Image Adjustment Hue Sound Notification On Off Contrast Camera Info Camera covert On Off Default Intelligent Surveillance A NOTE The lt Image Adjustment gt option will only be available when viewing single channel screen Click the lt Default gt button to reset the value to the original preset NOTE The lt Image Adjustment gt function has no effect on the recorded video Whatever changes made to the lt Image A
45. disconnection list To enable it again click on the lt Setting gt icon and go to the lt Log gt tab NOTE Besides auto reconnect a progress bar will be displayed as below The connecting process will take at most 30 seconds User s Manual Auto Reconnect of Specific Disconnected Sites The CMS will automatically reconnect to specific disconnected sites every 7 minutes Refer to the following table for all cases Sites that are not connected at the beginning Sites that are disconnected manually Sites that are connected at the beginning but disconnected for some reason later on Displaying Color of Camera Titles There are three different displaying colors for camera titles Red White and Green The following chart shows the meaning of three different colors Red The connected site is a DVR currently recording 2 The connected site is an IP Camera or a Video Server Assign a Channel Site to Certain Window s The CMS allows users to assign any channel site in the site tree to any grid of the CMS main window Follow steps below to complete assignment Step 1 Click and hold the channel site users want Step 2 Drag and drop it onto the window that users want to assign in Resort Remove Display Window Grids Right click on any channel and select lt Re sort gt to rearrange camera images of connected sites in order up to 512 channels Alternatively users can also remove any channel by rig
46. djustment gt will not be applied to the recorded video 55 6 7 56 User s Manual Playback Recorded Video This function allows the CMS user to retrieve and play videos stored in the connected DVR Click on the lt Playback gt icon the figure below will be displayed lt Valid Time gt indicates that the connected DVR starts recording from a certain period of time and ends at a certain period of time Valid time Site 01 Mew Site 192 168 6 114 Start 2009 07 28 12 47 26 End 2009 08 05 11 53 37 Select channel Selected time Start Time 2009 07 26 12 47 26 End Time E Function Playback C Archive C Export Local aK ca The other way to display the above ReConnect windwo is to right click on the site in _ DisConnect the site tree and select lt Playback gt Live gt lt Remote Playback gt from the Record Configuration pull down menu Event Search Local playback Flayback Femote playback Camera Setting User s Manual Playback the video stored in HDD of the connected DVR Follow steps below to playback the video stored in the connected DVR Step 1 First select lt Playback gt in Function area Function Playback _ Archive _ ExpeortiLocal Step 2 Specify the starting time for playback by setting the lt Selected time gt or by moving the arrow of the slider bar at the bottom Then click lt OK gt to playback the video
47. e arrows to pan and or tilt the dome camera Speed Slider Bar The slider bar is used to adjust the speed of the pan tilt movement O is the slowest and 100 is the fastest Mouse Control If the mouse is moved to the top bottom left right edge of the screen a red triangle as in the picture on the right will show up At this time left clicking the mouse can move the screen toward the direction where the red triangle points to Zoom In Out using the scroll wheel of the mouse User s Manual 6 15 Schedule Record Function The user can schedule specific time to record the videos to the local computer The Schedule Record window will be displayed by clicking on the lt Schedule Record gt icon The current setting site will be shown on the top of the Schedule Record window 01 New Site a Schedule Record Setting Schedule Record Function ch3 cha chs che amp ch che cho chio chit chiz chi3 chi4 chis rL amp ch2 Site 1 RECORD BY SITE Onm SELECT CELL Holiday Setup 2009 8 5 Add OK Cancel Select All Clear All 01 New Site a Schedule Record Setting E chi Schedule Record Function 5 ch2z Site 1 RECORD BY SITE SELECT CELL ch3 E ch4 chs che ch che chs chia chil chiz chi3 chi4 chis aa ek Holiday Setup 2009 ef 5 Add Cancel Select All Clear All
48. e different from each other Refer to the following for an example OSD Menu of a DVR The Menu function is similar to the SoecoRemote software Please refer to the DVR User s Manual for detail instruction Config Menu DYR S5SITE 1 System Setup Pk Model Version i Model Language Har fit41 A5 Date Time Unit Name loon2 0072 0330 0072 Network Setup E5455 Setup Audio Output Re Camera Setup Record Setup Event Setup Database Setup AN NOTE The configuration function is not available for SIP IP cameras Therefore the lt Configuration gt item in the right click pull down menu will be grayed out User s Manual 6 9 Search for Event Videos The CMS is capable of searching playing back ReConnect and archiving the event videos DisConnect Live Right click on the Site and select lt Event Search gt Record and the lt Event Search gt window will be displayed Configuration Event Search Playback Camera Setting Users can search the event list of the connected DVR If users have installed the POS module users can either search by event or text To play the event video Select Play Event and double click on any item to view the playback of the event Date Time Ke i f Search by Text 2007 12 17 12 11 20 Type 2007 12 17 12 20 57 2007 12 17 12 22 38 2007 12 17 12 26 58 2007 12 18 03 44 49 Value Upper limit l Search by Date Time Start Time v Play Event Do
49. e exported Click on Start Export to begin exporting process The remaining steps are the same as the exporting process described in the section Playback Recorded Video Please refer to the section for details of the remaining steps Event Search SITE 1 2007 12 17 12 11 20 2007 12 17 12 20 57 ROOF 12 17 12 22 38 ed Es 8 12 26 56 O O O OO OMO 2007 12 17 12 26 58 2007 12 16 03 44 49 C Play Event f Archive Event Press Ctrl to multi select Start Export Previous Next 69 6 10 70 User s Manual CMS Motion Detection Users can setup motion detection at CMS site independently Right click on a preferred grid and select lt Intelligent Surveillance gt gt lt Motion Detection gt from the pull down menu Snapshot Dome Setting Dome Control Re sort Remove Image Adjustment Sound Notification On Oft Camera Info Camera covert On Off Intelligent Surveillance Missing Foreign Object Detection Users can choose to monitor the complete screen or select up to 8 boxed areas after clicked on lt Regional gt Click on lt Clear gt button to delete all selected areas Alternatively right click on any selected area to delete it individually Sensitivity Wace Preview _ Enable Function E Motion recording eee MMS Pi e mA F Show Motion Detection Region a T fate Detection Region a ta et a ALL at a DR RE Ar Regional T
50. el where a dome camera is properly installed Refer to the following picture to see how they look like Dome Setting EM Snapshot SITE I CHI il ial r Talk On Oofh g S eat Ee E s Re sort iiris Remove ZOOM Image Adjustment Nn A Sound Notification On Off g hd Camera Info Camera covert On Off e Intelligent Surveillance Dome Setting Select lt Dome Setting gt to setup the Dome ID or Dome Protocol Note that dome protocol changed at this interface is only temporary To permanently change dome protocol please modify it in the configuration Dome Control The function of each button on the lt Dome Control gt panel is described below A F Auto Focus Click on M to focus the camera automatically Set Go Preset Point Click on wall to set a present point and aa to go to the preset point ID Click on m to setup the Dome ID Protocol This function resembles to the lt Dome Setting gt Focus This is used to manually focus on the objects Click on the icons to adjust the focus T 78 User s Manual Iris This is used to setup the iris Click on the icon let in more light or the icon to reduce the light Zoom This is used to zoom in out to the object Click on the icons to adjust It can also be adjusted by the scroll wheel of the mouse Scroll toward users to zoom out and away from users to zoom in up to 7 times the original size Direction Button Click on th
51. era icons in E MAP dome camera fixed camera and alert icons Dome Camera icon i Fixed Camera icon Eb Alert icon Dome camera icon will be displayed when the selected camera is a PTZ pan tilt zoom dome camera Fixed Camera icon will be displayed when the selected camera is a fixed camera Alert icon will be displayed when an alert is triggered to the camera on the image The alert icon will blink to attract attention Change E MAP Size Users can adjust the display size of the image on E MAP by clicking on the icons described as below lt Original gt To display the original size of the image lt Double gt To double the size of current displayed image lt Half gt To reduce current displayed image size by one half lt Fill gt To adjust the image to fit display window NOTE If there is no image file loaded on the E MAP window an error message will be shown when clicked on any of the four buttons above NOTE When the image is very large or when users cannot see the entire image in the display window click on a channel in the site tree and the E MAP will automatically move to the location of the selected channel 87 88 Google Map Function With Google Map function users can mark the locations of loaded emaps on Google map Refer to the steps below for details mema I e S gt M TT eel hee 52 ui EEA Step A Click on lt Google map gt icon and Google map will be displayed
52. ess Ctrl key to select multiple Files AN NOTE For event search of DVR data the lt CMS gt lt Group gt and lt Site gt in Box A will be inaccessible Video Type Display The chart in the middle of the Playback Search window allows users to assign unique color displays to represent different types of video data Double click on any cell under the Color column and choose a preferred color to represent the corresponding video type Type Nernal Motion by device Motion by CMS Alarm by device 99 User s Manual Snapshot Click on the lt Snapshot gt icon to capture a snapshot of the Ea CMSPlayer_1 screen Alternatively click on the Player Control Menu Bar as WOT SVS shown on the right E PLAY FAST FORWARD When the snapshot window is opened users can choose to FAST BACKWARD rename the filename or leave it as it is Click on lt OK gt to save the snapshot or lt CANCEL gt to discard it SNAPSHOT g e cancer _fSave File Name 100 User s Manual Frame View Setting The user can choose to show hide the time and View Setting alert text on the video Click on the lt Frame View Setting gt icon and the EJ show Time View Setting window will be displayed Check eee lt Show Time gt and the time will be shown on the screen Check lt Show Frame State gt and the alert text such as motion or video loss will be shown Uncheck to hide the information
53. essage will be shown Click on lt Clear All gt will delete all folders except the first preset folder In each folder subfolders will automatically be created with folder name RecordFolder which represents an 8 digit serial number Each subfolder can store up to 500 videos Once a subfolder is full a new subfolder with a subsequent number will be created and new files will be stored to the new subfolder Circular Function The lt Circular gt function is used to adjust the HDD space usage of CMS For example when the threshold is set to 1GB and there are 20GB free disk Space remaining in the HDD CMS can only access the HDD no more than 19GB When the free disk size is smaller than threshold 1 If the circulation of files is performed at first time CMS will start to overwrite the earliest recoded data Next time when CMS starts up the circulation of files will continue from where it was up to 2 If the destination folders are reset new folders will be created to store new files The old files will be deleted and rewritten with new files Record Videos from SIP Cameras to Remote Network Disks When videos from SIP cameras will be recorded to a remote network disk the DRV file is going to be stored under a temporary folder CMS TEMP_REC if the file size is less than 100MB Once the file size reached 100MB the file will automatically be transferred to the designated remote network disk lf the recording
54. for users to define recording duration of event videos when schedule is set and or when motion recording is enabled In addition users can send notice to a specific email via a SMTP server by s selecting lt ON gt next to lt Enable gt under Email Notice If the email server requires SSL select lt ON gt next to lt SSL gt Then enter all required SMTP information If the format of the email address is entered incorrectly an alert message will be displayed Settings Groups File path Event CMs User Sequence Login Setting Network Log Email Notice Event Full Screen Enable Enable x SSL Event Recording Duration SMTF Server SMTP Fort SMTP Accounk SMTP Password Email Sddress Export Import 5ave and Connect Save Cancel A NOTE If the user reconnect or disconnect the sites the list of the event full screen will be cleared NOTE Once the list of the event full screen finished playing the window will return to former viewing status Step 4 Alert Action The connected DVR sends 4 types of alert message State to the CMS Alive Alarm Motion and Video Loss Alive messages are sent when the notification option is set to lt Alive gt or lt Both gt in the connected DVR Alarm Motion and Video Loss messages are sent when the notification option is set to lt Event gt or lt Both gt in the connected DVR 33 34 User s Manual Viewing the alert events
55. g Action ReConneck Site Mew Sike DisConneck Site Mew Site Logout Login Local PlayBack Local PlayBack Logout Login Reconnect Site New Site DisConnmect Site New Site Reconnect Site Wew Site DisConnect Site New Site Disconnection Log Pop Up Disconnection Log Window 4 Save Disconnection Log Browse C Program Files ChS Log d Save Previous Save and Connect Save Cancel Export Import The list will display 1 000 items with latest ones shown at the bottom The list can store up to 10 000 items in circulation which means the oldest ones will be deleted when the number of items exceeds 10 000 Save button Click this button to save the log file to a desired destination Previous button Click this button to show previous 1 000 items Next button Click this button to show next 1 000 items On the right hand side of the window users can choose whether to show and or save disconnection logs Check the box next to Pup Up Disconnection logs Log Window to display disconnection If users wish to save disconnection logs check the box next to Save Disconnection Log and click lt Browse gt to setup the directory folder and the file name of the disconnection log file 43 9 10 44 User s Manual Export or Import Settings The export import function provides users the option to backup the settings as needed Settings
56. g Foreign Object Detection gt from the pull down menu Snapshot Dome Setting Dame Control Re sort Remove Image Adjustment Sound Notificatian On Oft Camera Info Camera covert On Off _ Motion Detection Intelligent Surveillance Missing Foreign Object Detection The object detected search window will be shown as below Object detected Search Double click to play Video Preview Please sek detection area Time 2008 12 16 19 17 43 r CA EO EA 2008 12 16 19 20 07 2008 12 16 19 20 31 l CM A EORR s anana b i 4 es eS make a atta R AEE e a Configuration Sensitivity m Interval mm Sec Enable Function E Show Region Clear All Apply 72 User s Manual Users can setup at most 8 monitoring areas Click on lt Clear All gt button to delete all boxes Alternatively right click on any single box to delete it individually Sensitivity Setup a desired sensitivity level Interval The time specified here is for determining the lost of objects If an object is removed from the selected areas for more than the time specified here lost of object alert will be triggered Enable Function Check on it to start monitor object Show Region Check on it to display the detection area visually on the monitoring screen The boxes will also be captured and displayed on the snapshot images Clear All Click on it to clear all selected boxes Apply Click on it to save and
57. he setting of connecting group or sites is changed users can directly click on lt Save and Connect gt to re establish the connection User s Manual 5 1 Setup Groups Up to 10 groups can be set in the CMS This section guides the user to add or remove a group and also shows the user how to set start group Add a group Click a button to add a group Double click on the group to rename it Settings Groups File path Event CMS User Login Setting Network Log Groups Site Setting ae E H T Site E e Add a group p Expand all groups i Hide all groups T Password O OYE IP Cam Model Stream Type The other way to add a group is to right click on lt Groups gt and select lt Add a group gt 19 20 User s Manual Set Start Group Start Group is the group that will be connected after starting the CMS Right click on the group to be set as start group and select lt Set as start group gt from the pull down menu Settings Groups Site Setting Gaee 2 amp Ste a Groups IP S 01 New Group Add a site 01 New Site a 02 New Group Remove 01 New Site Rename Expand IP Cam Hide Set as start group A NOTE If a group is set as the start group the icon will be changed as shown in the figure above User s Manual Expand a Grou There are two ways to expand or hide a group One way is to use the al T
58. hlighted in brown and the selected date is highlighted in blue Step D Click and drag the cursor to select designated videos Step E The start and end time of the selected video will be displayed here Step F Click on the lt Start gt button and a confirmation dialog will be displayed Enter correct username and password to start the deletion 98 User s Manual Event List In addition users can also playback and export event videos via searching through the event list Click on the lt Event List gt button on the upper right hand corner of the Playback Search window The Event List window will be displayed as on the right Refer to below for the instruction First set searching criteria in Box A and click on the lt Search gt button The event videos satisfied the searching criteria will be listed in Box B If the list contains more than 1000 event videos click on the lt Previous gt and lt Next gt buttons in Box D to see more selections In Box C users can choose to playback or export event videos Select lt Play Event gt and double click on any item in Box B to playback the event video Alternatively select lt Export event gt and a lt Start gt button will appear at the bottom Press Ctrl key to select multiple files and click on the lt Start gt button to begin exporting the event video s v 1 Y 2009 08 05 00 00 00 CMS No GROUP SITE CH Start Time Export event Pr
59. ht clicking on the grid and select lt Remove gt Or users can select any grid and press lt Delete gt key on the keyboard Sound Natification On Off to remove the channel Camera Info Camera covert On Off Intelligent Surveillance Note that clicking lt Re sort gt will restore the removed channels or users can add the channels back to any grid via drag and drop NOTE These functions are also available in the CMS Player window BUT not accessible in sequence mode 47 48 User s Manual Save Layout Files The layout arrangement can be individually memorized for each connected group Also the CMS will keep the layout arrangement when it s closed and restore the same layout when it s opened again Each login account can save it s own layout files Right click on any mode icons and the Select from preview dialog select from page number pull down menu will be shown as on the Layout fil right After selected lt Layout file gt the setting window will be displayed as below Layout file File list Function IDE File name Save Layout file Save Current selection Delete Load The layout files are for backup or other users use Once the file name is entered and clicked lt Save gt the new layout file will be shown on the file list Select a layout file from the list and click lt Delete gt to delete the file or press the Delete key on the keyboard can also delete
60. ill also be ended at the same time SNAPSHOT Click to save a snapshot of the current window s Refer to section Take a Snapshot for detailed information User s Manual E MAP Click to open the E MAP program The E Map is a program that allows the user to illustrate the positions of the cameras on a self selected image RECORD Click to schedule the recording time frame for the sites SETTING Click to set up the configuration Refer to section Configure The CMS for detailed information HEALTH Click to see the HDD information of the connected DVR s The data will be updated every 5 minutes The following figure is an example See Health Function section for more detailed information Health Status Refresh Rate 5 min Site 01 Device Name Internal External Total size Active NonActive Temperature ST3160815AS Internal 154GB Active 38 A NOTE If more than half of the connected devices are not our products a warning message as below will be shown and the CMS will be closed automatically CMS Error At least half of the connected devices must be our products LOCK Click to lock the CMS to protect the works on the CMS when the user needs to be away from the computer for a while This function is the same as the computer s screensaver See Lock Function section for more detailed information User s Manual 4 1 CMS Icon in the System Tray When CMS is started up CMS icon will always be mee toe
61. is interrupted either connection reset disconnected stop recording etc a progress bar will be shown to inform the user that the DRV file is being transferred to the designated remote network disk 5S AS EE SENS 29 30 User s Manual Data Life Time If users checked the box in front of DLT to enable Data Life Time function the duration in days has also to be defined When Data Life Time function is enabled CMS will check the file edit time of the recorded video files in all Record Path and any video files exceed the defined duration will automatically be permanently deleted Snapshot Type CMS has a snapshot function and the file type for snapshot can be defined here Note that if more than one type are selected take 2 types for example then each snapshot is saved to 2 types of files They are the same image but in different formats For instance if Bmp amp Tif are selected and the snapshot is taken two types of image files of the same snapshot image will be created User s Manual 5 4 Alert Events The alert function enables the connected DVR s to send alert signals to the CMS within the network This section describes how the alert function works Setting up the alert function Step 1 Find the IP address of the local computer Go to Start menu select Run amp r Search mororo gt C P tog off o Turn OFF Compubes Type in cmd and click OK Type the name of a program fo
62. it first A Please check if the computer meets the system requirement B If the CMS automatically closes when it s opened or when it s connecting to sites please send the files stored in CMS Setting under improper operation condition Afterwards re install CMS and check to install Default Setting during installation Remember not to import old setting files This will tell whether if the old setting data are corrupted amp CMS Setup Installation Options Ii Check the components you want to install and uncheck the components ara YOU don t want to install Click Next to continue Select components to install Microsoft C 2008 SP1 Redistributable Pact CMS Required Stark Menu Shortcuts C NTF Network Time Protocol Server Default Setting Old setting will be deleted Ext2Fsd text file system driver For Window Space required 50 1MB Cancel C If CMS cannot successfully connect to sites check the followings e Confirm IP port username and password of the site Users can connect to the site via IE browser to verify the site exists and is connectable e Close firewall and virus scan software and try to connect again If the problem is due to firewall or virus scan software please change their settings e f the connection still failed please send the IP address to our engineer A NOTE When users need to ask for the engineer s help please send a copy of the files stored in CMS Log as well 107 User
63. lder document or 7 Lae Internet resource and Windows wil open it For you Open cmd cancel Browse Type in ipconfig to get the IP Address of the local computer Write down the IP address on a piece of paper for later use es 0 WINDOWS Systema cmd ent Pal fs Microsoft Windows N P Version 5 1 2608 iG at pe ight 985 2001 Aicrosoft Ga rp C s Bocumente and Bott ines Ohare ae gt ipe ont ig Hindous IF Cani igurat ion Ethernet ada pPter Local Area Connection Lonnie tions ped ifie DAS Suffix IP Adldweee a a a a a a a a a Z AFE CIB r LZA Subne Mag k 1 n 2 E a E a 1 m 2 55 i 55 i 55 E 1 E a is Pd Default Gateway gt s a aa a 192 168 7 254 G Pocuments and Settings Oimer gt 31 32 User s Manual Step 2 Setup the lt Alert Notification Setup gt on the connected DVR s The lt Alert Notification Setup gt allows the user to send alert notifications to the CMS program which had been installed to the computer Alert Notification Setup Alert Configuration Set 1 Alert Notification OFF Alert IP 192 168 7 122 Alert Port 9999 Alive Interval 120sec Alert Configuration Set lt Alert Configuration Set gt provides 3 combinations of Alert Notification IP and Port The user can match the connected DVR to at most 3 different CMS servers Alert Notification 4 options are included in this item lt OFF gt lt Event gt lt Alive gt and lt
64. lect Sound a None None 9 None None None None None None 31 None None None None None None None 9 None None None None None None None None None None None None 9 5 22 24 25 50 2 28 30 31 26 4 5 8 Previous net Export Upload Cancel Select a sound in the combo box and click on any grid to assign the selected sound to the corresponding channel and schedule The grid assigned with the sound selected in the combo box will be highlighted Note that the combo box will only show sounds that are assigned with files The lt Export gt button allows the administrator to export sound files to selected destination for backup purpose A window will be displayed to show status No Sound No Status Success Success Success Success Success When the setting is done click on lt Upload gt button to send the settings to the DVR A progress window will be displayed as follows The left hand side shows newly added sound files while the right hand side shows the assignment of sound files to corresponding channels and schedules Click lt OK gt and the digital deterrent window will be closed Upload Completed Set Config success No Sound No Status Success AN NOTE Click on lt Cancel gt button will clear everything 95 User s Manual Appendix A The CMS Player The CMS Player is a compact version of the standard DVR Player When multiple CMS instances are opened in multiple monitors each CMS can launch 1 CMS
65. ll 83 User s Manual 6 16 E MAP Function The E Map is a program that allows the user to illustrate the position of the cameras on a Self selected image Click on the lt Emap gt icon located on the top of the CMS main window to open the E Map Please follow the steps below to setup the E Map NOTE The image shown in the window is the default picture It will only be available when default is installed Step 2 The figure below is the Load Image window to add or delete images and undo or confirm settings Click on lt Add gt to add an image Note that E MAP only supports bmp jog and gif files Load Image E MAP Emap ImageList delete S ok 84 User s Manual Step 3 After the image is added the filename of the image will be displayed on the list Index indicates the order starting from 1 of the files After the image is loaded click lt Ok gt to confirm and save the setting Load Image E MAP z3 Emap ImageList Delete Undo m Step 4 Select the image file just loaded to the E Map from the scroll menu LOADIMAGE ORIGINAL COUBLE HALF Google map 01 New Site Erant ipa Emapd jpg the store bmp Step 5 The chosen image will be displayed in the E Map main window The image of a grocery store is used in the following example Drag and drop a channel from the site tree on the left to any place of the image jel E MAP L
66. lly converted Setting4 to 4VI file by the CMS Player SkinChange Snapshot 69 SPL 2 Please download and install the codec From T http www Filehippo com download_klite_codec_pack 3723 TEMP_REC TEMP_REC2 N DRY File Name Status 1 C Program Files CMS 4rchive sample sample_CMS01_Arc_Grou 2 C Program Files CMS 4rchive sample sample_CMS501_Arc_Grou 3 C Program Files CMS 4rchive sample sample_CMS01_Arc_Grou Convert AN NOTE The list can contain files from different folders The messages shown on the conversion list windows are very important If the duration of a DRV file is less than 3 seconds the file will not be successfully converted In addition a link is provided for users to download and install video codec in order to playback the converted AVI files 63 User s Manual lf users wish to remove any file 1 1F the duration of a DRY File is less than 3 seconds it will not be successfully converted from the conversion list right tavtieby the cms Player click on the file and select 2 Please download and install the codec From http Saw Filehippo com download kite _codec_pack S723 lt Remove gt or lt Remove All gt to delete files from the list Click N DRY File Name are CA Program Files CMS 4rchivel sample sample_CM501_Arc_Grou C Program amp CMS01_Arc_Grou C Program Files CMS arch le CM OL ore Gro lt Convert gt to start conversion of j fi M a
67. meras do not have connected HDD they will not be shown in the chart Health Status Refresh Rate 5 min Site 01 Device Name Internal External Total size Active NonActive Temperature ST3160815A5 Internal 15466 Active 38 The information items shown in the chart are described as below Device Name This item shows the model name of the HDD Internal External This item indicates whether the HDD is an internal or external device Total Size This item indicates the total size of the HDD Active Non Active This item indicates whether the HDD is active or non active Temperature This item indicates the current temperature of the HDD in Celsius degree NOTE Temperature data is not retrievable for some specific models Under Temperature column it will show Not available 90 User s Manual 6 18 Lock Function The Lock function allows the user to protect the CMS from unauthorized use when there is need to be away from the computer for a while Closing the CMS is not allowed and other functionality will be limited as described below Click on the lt Lock gt icon and a confirmation message will be displayed as on the right Click Yes to confirm After the user clicked Yes the icon will be Login changed to show that CMS is currently being 235 enter username and password to unlock locked When the user clicks unlock the ger window as shown on the right will be ETE displayed for the use
68. n R files on the list A small window will be displayed ason ENMI Converting the right to show the progress of conversion If users wish to terminate the conversion click lt S TOP gt to abort lf the conversion is aborted the P 1 IF the duration of a DRY file is less than 3 seconds it will not be successfully converted status column will show Break _ toavtfie by the cms Player Off for the specific file aborted If the file failed to be converted 2 Please download and install the codec From http fiw Filehippo com download_kite_codec_pack 3723 the status column will Show m oaveie name Status C Program Files CMS 4rchive sample sample_CMS01_Arc_Grou Done e F al C Program Files CMS 4rchive sample sample_CMS01_Arc_Grou Break Off C Program Files CMS 4rchive sample sample_CMS01_Arc_Grou If the conversion is completed the message as on the right will be displayed The converted A TR files will be stored in the folder specified in file E path setting of CMS Player For more information about other CMS Player operations please refer to the Appendix A User s Manual Install required codec to playback converted AVI files In order to correctly playback converted AVI files install K Lite Codec Pack and select codec options as described below 1 Check lt Mu law A law gt amp lt MS ADPCM gt under lt Other audio formats ffdshow gt a Setup K
69. n export video data at DVR site through CMS control Software version is defined at the second column of software serial numbers for example 7630 2125 0301 0539 As well TN models with software version 2121 or newer can perform the same function For TH series all models can perform this function Follow steps below to export video data at the connected DVR site Note that only the administrator has the authority to perform this function Step 1 First select lt Export Local gt in Function area Function C Playback C Archive Export Local Step 2 Specify the Start Time lt Set start gt and End Time lt Set end gt and click lt OK gt to start exporting video data Step 3 After the user click on lt OK gt the DVR will start to export video data to connected devices A window will be displayed to show current status DYR Video Export SITE O1 Device Info LITEON CDRW SOQHRS2595 702 MB Export Format DRY Digital Signature Yes Erase Disc Yes Export State Video Exporting Estimate Size 91 ME 11 The lt Export State gt will show Export Module Initializing File Collecting Signaturing or Video Exporting The status will be updated every 10 seconds 59 60 User s Manual The DVR will select destination devices by the following order 1 External DVD RW 2 External Storage device 3 Internal DVD RW Step 4 Some error conditions listed below
70. n screen the mouse pointer will change to i and when the mouse is clicked the pointer will become to indicate that the image is dragged NOTE This function is not available in Dome Camera Control mode Scrolling the wheel of the mouse will zoom in out the camera lens of the dome camera AN NOTE This function will use a lot of CPU resources It is recommended not to open too many programs at the same time to avoid crash of CPU 53 6 5 54 User s Manual Sequence Display To start displaying the sequence list click on the lt Sequence gt icon to start the sequence The color of the icon will change to red color when the sequence mode starts The initial display mode will be what was set in sequence setup Another way to start displaying the sequence list is by right clicking on the sequence icon and a list will be displayed as shown below Move the mouse to any item and the preview window will be displayed on the right This list gives choices to the user to begin displaying the sequence from any item Double click on the desired item to start sequence mode After the sequence is started users can still change the split mode by clicking on the display mode icons for 2X2 3X3 4X4 or 5X5 However the starting split mode set in lt Sequence gt will remain the same Note that icons for 6X6 XT or 8X8 will not be accessible because they are not allowed to be shown in sequence mode The following functions are
71. nd Object Search function can be enabled simultaneously User s Manual 6 12 Take a Snapshot The Snapshot function is a simple screen capture tool When users click on the lt Snapshot gt icon it will capture the screenshot of the window that users are currently viewing Users can save the screenshots to the default path CMS Snapshot or the folder that users have previously set in the file path Please refer to lt Setup the File Path gt for more information about changing the file paths There are 2 ways to take the snapshot One is to click on the lt Snapshot gt icon and the snapshot window will be displayed Select lt OK gt to save the file The other way is to right click on the window and select lt Snapshot gt Note that it will only capture the image of the selected channel The file will be saved without displaying the image AN NOTE The default image format is jpg If users have selected more than one file types and took the snapshot users will get more than one files of the same snapshot image Please go to lt Settings gt to setup the snapshot file type Settings Groups File path Fath Circular Snapshot path C Program Files ChM5 Snapshot Enable ON i Type By size Archive path Y C Program Files CMS 4rchive ee on Record path i Data life time C Program Files Ch5 Record Advance DLT i Snapshot hype Bmp Jpg 19 6 13 76 User s Manual
72. o move one step forward 102 User s Manual Ea CMSPlayer_1 PLAYER CONTROL SYS E a FAST FORWARD F FAST BACKIVARD SNAPSHOT Ea CMSPlayer_1 PLAY FAST FORWARD FAST BACKWARD SNAPSHOT Ea CMSPlayer_1 FAST FORWARD FAST BACKWARD SNAPSHOT Ea CMSPlayer_1 E a FAST FORWARD FAST BACKWARD SNAPSHOT User s Manual site Tree The site tree shows the channels of the opened DRV file Double SITE 1 CH 14 cF click on a channel to view the specific channel in one screen c Program Files cmsi Right click on the site tree can choose to expand or hide site tree ai If the site tree is closed it can be recalled under the View Menu E Che a Ch jew Ths jew Ch jen Ch jew Ch jen cha Bar as shown below Ea CMSPlayer_1 FILE PLAYER CONTROL SYSTEM SETTING w TOOLBAR MODE OPTION chid chii Chl a chia Ga Chis Ger chis jew chi FULL SCREEN Audio Click on the speaker icon located on the bottom of the site tree to enable or disable the audio Alternatively click on the System Setting Menu Bar as shown below Ea CMSPlayer_1 FILE PLAYER CONTROL AUDIO ON OFF VIEW SETTING FILE PATH SETTING Display Modes Click on the lt 2X2 gt lt 3X3 gt or lt 4X4 gt icons to view the images in a multiple window mode If the Mode window is closed it can be recalled under the View Menu Bar as shown below Ea CMSPlayer_1 FILE PLAYER CONTROL SYSTEM SETTING TOOLBAR
73. om selected schedule for instance 3 00 3 30 set the selecting option to lt Clear Cell gt in box 1 Click and drag the cells under 03 from Tuesday to Wednesday The cells will be blank which indicates that CMS is not going to record anything Click on lt OK gt to save and exit the Schedule Record window 01 New Site a Schedule Record Setting chi Schedule Record Function Gad a Site 1 RECORD BY SITE ORE CLEAR CELL ch3 E Ch chs che ch che cho 2 chio chil chi2 chis chi4 chis am as Holiday Setup 2009 8 6 Add OK Cancel Select All Clear All Select Clear All Cell lf users want to set the schedule to record at all times click on the circled blank cell located on top left corner of the table or set the selecting option to lt Select All Cell gt If users want to reset the schedule of the site set the selecting option to lt Clear All Cell gt Alternatively users can click on the lt Select All gt or lt Clear All gt buttons to setup all sites to always record or always not record at once Click on lt OK gt to save and exit Schedule Record window 01 New Site a Schedule Record Setting chi Schedule Record Function 3 oe Site 1 RECORD BY SITE NORMAL AND EVENT v SELECT ALL CELL x ch3 E che chs Ch ch che cho chio chil chiz2 chi3 chi chis a ek Holi
74. p 4 Click lt Close gt and the Software Installation is complete gt CMS Setup Completed Ce Completed NTP Service Server The NTP Service Server enables the local computer which is running the CMS to become a central NTP server for the connected DVR s so the time for the connected DVR s and the local computer is synchronized To do so the IP address of the local computer is needed Go to Start menu select Run All Programe gt Type the name of a program folder document or if Internet resource and Windows vall open it for you Open cmd Loe h canei erowse User s Manual Type in ipconfig to get the IP Address of the local computer Write down the IP address on a piece of paper for later use eo Ci WINDOS Sy hem 3 crew i B xi Hicrosoft Windows XP Version 5 1 2600 l a aC Copyright 19 85 7001 Aierosoft Corp C Documents and Settings Amer ipconf ig Windows IF Configuration Ethornet ada ptor Lacal firea Connect ian Connection specific DHE SuFfin IF Bddpeemw w we we ee z 192 168 7122 Sailnet Aask a a C a i a i i a i g fo Pee oo s E Default Gateway s s 927 168 797 2754 CoN Documenta and Sette ings wer After the IP address is found setup the connected DVR s First go to lt Main Menu gt gt lt System Setup gt gt lt Date Time gt gt lt Time
75. r s Manual Missing Foreign Object Detection Right clicking on any grid with video and select the option lt Missing Foreign Object Detection gt The basic configuration of Missing Foreign Object Detection function in CMS Player is the same as what is in CMS Missing Foreiqn _Object Detection for more details This section will introduce the different part of the Missing Foreign Object Detection function in CMS Player Image Adjustment Camera Info Missing Foreign Object Detection Re sort Remove Please refer to section Video Preview Please set detection area Area Mo 1 i i Trigger Time 2008 12 16 19 17 43 2008 12 16 19 19 42 2008 12 16 19 20 31 Ga a i a i a i a T i Ed EEEE EE EEES EEES End Time 2009 06 02 06 53 18 Start Time 2009 06 02 08 52 19 Configuration Sensitivity Interval Quick Enable Function Search Show Region Clear All Apply Quick Search Click on it to quick skim through the video for object search of the selected area s The list will be filled when foreign or lost of object alert s found Stop Quick Search Click on it to stop quick search 106 User s Manual Appendix B Troubleshooting The followings are some common situations when the user is having difficulty with the CMS server 1 The CMS server does not work properly How can it be recovered or where can ask for help Please try the following ways to recover
76. r to enter username and password to unlock To unlock the following are two scenarios Login Account Unlock Account Note 1 User Login User The access authority will still S L ayaan be eera 2 Administrator Login Administrator If password is changed use A a encore Sa When the CMS is locked windows control will be as the following two types _ Type Example Windows Contro 1 Setting setting Schedule The windows will be closed without Record EMAP saving changes It is recommended to Dome Control etc save settings before locking the CMS 2 Monitoring Archive Alert etc It is not allowed to close the window but just minimize it A NOTE If the CMS is forced to be closed while it s locked the CMS system will still be locked when it is started up again A NOTE If the password of the current login account is changed use the new password to unlock 91 6 19 92 User s Manual Digital Deterrent Function The DVR 4TH 8TH 16TH series models provide an extra peconnect function called Digital Deterrent that allows the user to PsConnect setup sounds to be played when alert events are ee Record triggered Right click on the DVR icon in the site tree and Configuration select lt Digital Deterrent gt from the pull down menu as a a Av DAC shown on the right Note that administrator and user ET accounts of the DVR are granted different privileges Digital De
77. rivileges of login accounts The default username and password are admin and 1234 Settings CMS User List User Information El Admin 01 admin User Name User List Password A NOTE Only login accounts under the lt Admin gt group have the privilege to change the settings in lt CMS User gt To add a user account users must first add a group Right click on lt User List gt and select lt Add Group gt from the pull down menu Settings File path DE Login Setting CMS User List User Information El Admin 01 admin User Name Password 35 User s Manual After the group is added the first user account of the group will also be created Users MUST set the password for this account before users can go to the next step Settings File path ee Login Setting CMS User List User Information El Admin p Group0ilserol 01 admin User Name P User List 01 SroupoiUserdl Group Attribution Setting Right click on lt NewGroup0O1 gt to add a user remove a group or rename the group Settings File path aui Login Setting CMS User List User Information El Admin 01 admin User Name 01 NWewsroupod Add a user 01 Sroupoil Remove a group Rename Group Attribution Setting NOTE The account currently used to login cannot be deleted 36 User s Manual Right Click on lt Group01User01 gt to remove a user or rename the username Set
78. rtane eneeren narmnrere irene rere none renee arnreer arr re rene y 90 T MM E E E E ES 91 Cote Digital Detorrem FUNGHON 2 srcivecrssaineereretarecensimnesnsstonecereisnecensionasaseionesmiaiasaneneianls 92 Appendix A The CMS PIA VOR sscssscrssr AESi 96 Appendix B TroubleShooting ccccssccceseeeenseceseeeesseseneeeesseeeneeeenseoeneeoeaseoenseseaeeoenees 107 User s Manual if Overview The Central Management System CMS offers a simple and centralized monitoring interface for the video surveillance equipments It gives the user access to monitor multiple DVRs and allows the user to simultaneously monitor 16 IP devices per group up to 10 groups within several clicks CMS System Features Monitor Multiple Sites Supports up to 16 IP devices SSL Email Notification Supports SSL SMTP Server for email notifications Alert Function LAN Only Sends live event video clips and messages to the local computer from all connected DVR s Device Configuration Configures the settings of the connected IP devices Remote Playback Allows playback of recorded video stored in the connected DVR s or NVR s HDD Information Displays information of HDDs in the local computer eMap Management Keeps geographical marks of surveillance layout on self selected maps Analog amp IP Speed Dome control IP joystick support 1 1 User s Manual System Requirement The following chart shows recommended compu
79. s Click on a channel to set unique schedule record for the particular channel In this example schedule of a site will be set Select a site in box 1 and set the recording option to lt NORMAL AND EVENT gt in box 2 3 01 New Site a Schedule Record Setting chi Schedule Record Function ch3 E Ch4 chs ch ch che cho chio chil chi2 chi3 chit chis ea ea Holiday Setup 2009 7 8 5 Add ancel Select All Clear All Step 2 Assuming that the site will be scheduled to start recording video from 2 00 to 4 30 on Tuesday and Wednesday Since the duration of each cell is 30 minutes click on the cell under 02 for Tuesday and drag to the cell under 04 for Wednesday and the color of the cells will be changed to green indicating that both normal and event videos are going to be recorded during the selected times E amp 01 New Site a Schedule Record Setting chi Schedule Record Function B aS Site 1 RECORD BY SITE OE SELECT CELL ch3 E ch4 chs Ch ch che cho chio chil chi2 chi3 chi4 chis Cee ean oh ead Holiday Setup 2009 7 8 6 l Add Cancel Select All Clear All Step 3 After the time frames are selected click lt OK gt to save and exit the Schedule Record 81 82 User s Manual Cancel Scheduled Recording Times If the user want to cancel a time frame fr
80. sts the channels that have been added to the list in order Click lt OK gt to save the settings Settings Sequence Setup Sequence Order Sequence Dwell sec NG Be CAMERA i Split Mode 2 2 Clear Sequence List Click lt Clear Sequence List gt to empty the list A message window will be shown for confirmation CMS zs 2 Want to clear sequence list 39 40 User s Manual 5 7 Login Setting The user can edit options regarding login settings in this section Administrator username and password is required to edit the setting Settings Settings User Name Password M Start CMS when Windows starts up Auto Login Auto retrieve Live image When Login Save and Connect Save Cancel As shown in the above picture the box marked 1 is where the user can enter a set of username and password to be used for auto login The Verify button can help the user to check if the username and password are correct The following messages boxes will show to inform the result of verification Correct Wrong es Correct Username and Password Incorrect User Name and Password al i l ka lt Tmi kr User s Manual The box marked 2 contains the options regarding automatic actions Clicking the first option Start CMS when Windows starts up to request the computer to open CMS in the mean time when the system startup Note that the other
81. ter system Intel Core 2 Duo 2 4GHz Intel Core 2 Quad 2 4GHz Minimum 1GB Recommended 2GB RAM Memory Connects up to 8 IP Connects up to 16 IP devices devices Minimum of 80GB HDD space is required if users are recording video to the local machine Minimum Recommended Video Card Graphics card with more Graphics card with than 64MB RAM 512MB RAM Minimum Recommended premet footage CPU Intel Core 2 Quad CPU Q6600 2 4GHz Tested Setup RAM 2GB OS WinXp Display NVDIA GeForce 8400GS 512M Ethernet Gigabit HUB A NOTE If the operating system is Windows Vista some functions such as Record Auto Reboot etc will not work properly due to User Account Control UAC Follow steps below to solve this problem Step 1 If a previous version of CMS is installed export setting files of CMS servers 1 2 before installing the new version CMS Step 2 Due to UAC user account in Windows Vista cannot properly run applications that will write in C Program Files folder Therefore CMS will be installed in C folder instead Step 3 Once the new version CMS is installed import the setting files back to CMS servers 1 2 User s Manual 2 Software Installation Follow the steps below to install CMS to the local computer Step 1 There are 2 ways to start the installation Option 1 Download the compressed file and extract S CMS_Setup rar it Click on the CMS_ Setup exe file to start CMS_Setup
82. terrent A NOTE If the CMS failed to retrieve the digital deterrent setting the digital deterrent main window will not be displayed Digital Deterrent Overview The digital deterrent will first show an overview window The function of the overview window is the same for both the administrator and the user accounts Click on any grid to play the preset sound The box next to Click to play sound will display the sound file being played Note that all grids will show None if it is the first time trying to setup the digital deterrent function None and Default cannot be played The following shows the Ul of an administrator s privilege Digital Deterrent Digital Deterrent Overview Setup C Manual Trigger Click to play sound 30 1 None None 9 None None None None None None 31 None None None None None l None None 9 None None None None None None None None None None None None 9 15 a 22 24 25 50 2 None 30 sdl 26 29 4 5 8 Next Cancel A user s privilege UI is shown as the following Digital Deterrent Digital Deterrent Overview None None 9 None None None None None None 31 None None None None None None None 9 None None None None None None None None None None None None 15 5 22 24 25 50 2 None 30 31 26 4 5 8 User s Manual Digital Deterrent Trigger Select Manual Trigger at the top of the window to display the trigger window Both the administrator and the user accounts can a
83. that are going to be installed It is strongly recommended to select the lt Start Menu Shortcuts gt to create shortcuts in the Start Menu and on the Desktop Otherwise whenever the program is to be opened it will have to be found under the path CMS EXE CMS exe Click lt Next gt to go to next step CMS Setup Installation Options J Check the components you want to install and uncheck the components a YOU don t want to install Click Next to continue aF Select components to install Microsoft Yc 2008 SP1 Redistributable Pac CMS Required Stark Menu Shortcuts C NTF Network Time Protocol Server C Default Setting Old setting will be deleted Ext2Fsd ext file system driver For Window Space required 49 2MB E ii b c The components of the CMS Installation Setup are a Microsoft VC 2008 SP1 Redistributable Package This is an upgrade package required for correctly running CMS b CMS The CMS main program must be installed default c Start Menu Shortcuts Check the box to create shortcuts in the Start Menu and on the Desktop NTP Network Time Protocol Server Check the box to install the NTP server Default Setting Old setting will be deleted Check the box to load default setting or uncheck it to load the old setting of previous installed CMS User s Manual f Ext2Fsd ext2 file system driver for Windows Check the box to install driver in order to be able to read ra
84. the Search button on the bottom right to open the Search window Step 2 Click lt Refresh gt to find the Sex IP address of DVR s available in the LAN TENE MODEL l Tee network Select from the list and Double click on the IP address to add it to a site Then enter username and password of the site NOTE The Device Search function can only be used to search for A addresses within the same LAN For example if the local computer uses an IP address of 192 168 1 5 and a connected DVR has an IP address of 192 168 1 7 the CMS will be able to find the IP address of the DVR However if there is another DVR connected to another LAN network such as 192 168 3 6 the CMS whose IP is 192 168 1 5 will not be able to find the IP address of the DVR in another LAN network 24 User s Manual 5 2 3 Setup the DVR Site Manually If the detailed information IP address port username and password of the connected DVR is provided a site can be setup manually Add a new site and enter the Name IP address Port Username and Password Select DVR and click lt OK gt to complete the setting Settings Groups File path Event CMs User Sequence Login Setting Network Log i Groups Site Setting amp Aa de oh ly Ei Site Mew Site a Groups IP 192 166 7 Eons d 01 New Group 01 New Site Port o0 Username Password DYR Model Stream Type
85. the selected file A message will be shown to confirm the deletion To load a layout file select a file and click lt Load gt or double click on the file show Covert Camera Images If a camera is set to covert at DVR site right Snapshot click on the grid and select lt Camera cover On OFF gt to un covert at CMS site Then video stream will come in and an icon amp will be shown at bottom left of the grid The Re sort icon represents that the camera is covert at Remove DVR site Sound Notification On Off Camera Info and DVR site are logged in using accounts f Camera covert On Off with administrator authority Intelligent Surveillance This function is only available when CMS User s Manual 6 2 Camera Setting Camera Info Configure Camera Setting Camera setting can be configured by right clicking on ReConnect a site and select lt Camera Setting gt DisConnect Live Camera viewing setting enables the user to set the neen display of Site Name Channel Name or Time on the Event Search top left corner of the image Playback Camera Settini Camera sound notification enables preset sound file to be played when an Configuration alert event occurs It can be set via Site Base or Channel Base Setting via Channel Base Select lt Channel Base gt from the menu and click lt Load gt to select a sound file Then click lt OK gt to save the setting Next right click on a channel grid
86. tings File path Ss Login Setting Ch1S User List User Information El Admin 01 admin User Name El User List GroupOluserOl Password SEAHEC ECE EEE EE EEE EE EO 01 SroupoiUserdl Remove a user Rename Group Attribution Setting The lt Group Attribution Setting gt is for setting up the privileges of the selected user Users can give each user account different privileges by configuring this function Settings File path aeia Login Setting CMS User List User Information El Admin 01 admin User Name User List E 01 NewGroupd1 01 SroupoiUserdl GroupOluserOl Password 1 SEAHEC ECE EEE EE EEE EE OE OE Group Attribution Setting 3 38 User s Manual After entering the lt Group Attribution Setting gt the following diagram will be shown Select a user account in lt Select CMS Group gt and users can click on the buttons to enable or disable its privileges Attribution Setup CMS Group Attribution Select CMS Group NewGroup01 Function List Group Per Site Per Camera Advance Setting Cancel Blue buttons are CMS menu controls including Playback CMS Player EMAP Schedule Record Setting and Lock Green buttons are site controls including ReConnect DisConnect Record Configuration Event Search and Camera Setting Orange buttons are camera controls including Sequence Rename Dome Setting Dome Control Remove and Sound Notifi
87. uble click to play event Play Event Double click to play event Archive Event C Export Event Previous Next Previous Next NOTE Archive Event and Export Event will not be available in Search By Text tab 67 68 User s Manual To archive the event video Select Archive Event and press the Ctrl key to select multiple event videos to be archived The maximum items can be selected is 1 000 which is the capacity of the list Event Search SITE 1 Event Archive SITE I E a Eg FROM Event NO 2 NOW bat Status 2007 l2fl7 12 20 57 Archive 2007 12 17 12 26 58 i 2007 12 17 12 26 59 walt 2007 12018 03 44 49 2 2007 12 18 03 44 49 ul aie Click on Start Archive and an Event Archive window will pop up The progress bar shows current downloading position The status column shows the event is under Archive Wait or Done condition A NOTE The event archive or normal video archive for different sites can be performed simultaneously User s Manual To export the event video TL models with software version 2125 or newer can export video data at DVR site through CMS control Software version is defined at the second column of software serial numbers for example 7630 2125 0301 0539 As well TN models with software version 2121 or newer can perform the same function Select Export Event and press the Ctrl key to select multiple event videos to b
88. us Cancel Click on lt Record sound gt button to start recording new sound instantly The recorded sound has to be within 10 seconds and will be temporary saved in the destination folder CMS Setting DD Sound When the digital deterrent window is closed the files will be automatically deleted Click on lt Save As gt button to permanently save the recorded sound file Click on lt Load gt button to load prerecorded sound file The loaded file should be a wave file in pcm a law or mu law format within 10 seconds Click on lt Play gt to play the current recorded or loaded sound file Then select a desired number of sound in the combo box and click lt Assign gt to store the current sound file to the selected number Note that the items in the combo box show in black when a sound file is assigned show in grey when no sound file is assigned or show in blue when a sound is assigned just now but not applied yet Repeat recording loading and assignment steps to setup more sound files Once the setting is done click on lt Next gt button to go to the next step A NOTE Before recording loading a sound file lt Play gt lt Save As gt and lt Assign gt buttons will not be available User s Manual Digital Deterrent Setup The last window is for the administrator to assign sound files per each channel according to schedule The window will be displayed as the following Digital Deterrent Set Digital Deterrent Se
89. w files in DVR HDD NOTE If users have already installed the EXT2IFS driver A and software please uninstall it beforehand for there might be confliction occurs while installing Ext2Fsd driver during CMS installation Step 2 The CMS main program will be the first program to be installed Choose a folder to install the CMS or it will be installed to a default destination folder CMS Click lt Install gt to start the Installation or click lt Back gt to go back to the previous step CMS Setup Installation Folder Ii Setup will install CMS Installation in the Following Folder To install in a spa different Folder click Browse and select another folder Click Install to start the installation Destination Folder CiProgram Files CMs Browse Space required 49 2MB Space available 755 1MB Cancel lt Back Install Step 3 The NTP Server will be the next program to be installed The NTP Server enables the local computer which is running the CMS to become a central NTP Server for the connected DVR s so the time for the local computer and the connected DVR s is synchronized Click lt OK gt to start installing the NTP Server d CMS Setup BS NTP Network Time Protocol is the abbreviation of Network Time Protocol which is designed for timesyne cross the network The following web site would be a good start point if you wanna get know about this topic http wwee ntp org User s Manual Ste

Central Management System User`s Manual

Contents

Download Pdf Manuals

Related Search

Related Contents